Page 1

INSTRUCTIONS YAMAHA RHINO Tail Gate Rail To avoid injury to your self or damage to the ATV, read these instructions carefully before installation. 1. Parts List: Item 1 2

Part Name Tail Gate Rail Self Tapping Screw

Description ¼” x 1”

Qty 1 4

2. Preparation: a) Lock parking brake on vehicle, making sure vehicle will not move while installing your Bed Rails. b) Remove and retain (4) screws from the upper inside edge of the tail gate. 3. Installation: a) Install Tail gate rail on top of tail gate, using original 4 screws in their original mounting locations. b) Tighten Tail Gate Rail bolts to 6 ft. lb. c) Install Item #2 Self-Tapping Screw in top of tail gate, using holes provided in Tail Gate Rail. 4. Maintenance:

Check all fasteners and re-torque when required.

5. Care and Cleaning:

Clean using a soft cloth with soap and water.

Customer service: For further information call Pro Armor at 951-270-0559

Y074062

Y074062_RhinoTailGateGrabRail_Instructions  

Install Tail gate rail on top of tail gate, using original 4 screws in their original mounting locations. b) Tighten Tail Gate Rail bolts to...

Advertisement