Page 1

INSTRUCTIONS YAMAHA RHINO Front Bumper To avoid injury to your self or damage to the ATV, read these instructions carefully before installation. 1. Parts List: Item 1 2 3

Part Name Front Bumper Washer Nylock Nut

Description Steel M6 M6

Qty 1 2 2

2. Preparation: a) Lock parking brake on vehicle, making sure vehicle will not move while installing your Rear Bumper b) Remove OEM Front skid plate and OEM Front Bumper. Retain all hardware. 3. Installation: a) Install new Front Bumper reusing the (4) OEM Bumper mounting points and hardware as shown.

OEM Mounting points

b) c)

Tighten hardware to 50 ft/lbs. Reinstall OEM Skid Plate with OEM bolts. Use Item #2 washers and Item #3 nuts.

4. Maintenance:

Check all fasteners and re-torque when required.

5. Care and Cleaning:

Clean using a soft cloth with soap and water.

6. Customer service:

For further information call Pro Armor at 951-270-0559 Y074027

Y074027_RhinoFrontBumperBlack_Instructions  

YAMAHA RHINO Front Bumper b) Tighten hardware to 50 ft/lbs. c) Reinstall OEM Skid Plate with OEM bolts. Use Item #2 washers and Item #3 nuts...

Advertisement