Page 1

INSTALLATION INSTRUCTIONS 2006 YAMAHA YZF 450 Pro Race Rear Grab Bar To avoid injury to yourself or damage to the ATV, read these instructions completely before installation. 1. Parts List: Item 1 2 3

Part Name Description Rear Grab Bar Washer M6 Washer Nylock Nut M6 Nylock Nut

Qty 1 2 2

2. Preparation: a)

Remove the OE rear grab bar and retain the mounting hardware and all Tail Light hardware. Rubber grommets must be removed and retained.

3. Installation: a) Install your new Rear Grab Bar on bike. b) Re-install the four OE 8mm bolts (2 per side) into mounting holes of Rear Grab Bar. c) Re-torque the four OE 8mm bolts to 25 N-m (18.5 ft-lbs) d) Re-install the Brake/Tail Light to the Rear Grab Bar using all OE grommets and hardware. e) Re-torque the 6mm Brake/Tail Light Hardware to 8 N-m (6.0 ft-lbs) f) Install Item #2 washers and Item #3 nuts at fender support mounts, reusing OE bolts. 4. Maintenance: 5. Care and Cleaning: 6. Customer service:

Periodically check all fasteners for tightness and retorque as required. Clean using a soft cloth and a non-abrasive metal polisher. For further information call Pro Armor at 951-270-0559

Y061059

Y061059_YFZ450ProRaceGrabBar06-UP_Instructions  

2006 YAMAHA YZF 450 Pro Race Rear Grab Bar a) Remove the OE rear grab bar and retain the mounting hardware and all Tail Light hardware. Rubb...

Advertisement