Page 1

YAMAHA GRIZZLY 700/550 REAR A-ARM GUARDS (Y057024) INSTALLATION INSTRUCTIONS

Please read these instructions carefully before installation to prevent injury to yourself or damage to your ATV. PARTS LIST: 3

ITEM 1 2 3 5

DESCRIPTION REAR LEFT A-ARM GUARD REAR RIGHT A-ARM GUARD MOUNTING HOOK M6 x 20mm FLANGED HEX BOLT

QTY 1 1 2 2

4

1 2

PREPARARTION:

1. Remove the plastic factory rear A-arm guards from the vehicle and retain the factory mounting hardware. INSTALLATION:

1. Position the rear left A-arm guard beneath the rear left A-arm or the vehicle. Align the rear mounting hole of the A-arm guard to the rear mounting point on the A-arm. Align the forward mounting hole of the A-arm guard to the A-arm’s mounting clamp. Install the mounting hardware as shown in the fig. 1 and repeat the procedure for the rear right A-arm guard on the right side of the vehicle. CLAMP MOUNT

LEFT SIDE REAR A-ARM SHOWN

Fig.1

-FORWARD MOUNTING POINT Re-install the retained factory mounting hardware.

Wrap (1) mounting hook over the A-arm tube. Install (1) M6 x 20mm bolt from the bottom of the A-arm guard through the dimpled slot into the threaded mounting hook -REAR MOUNTING POINT Re-install the retained factory mounting hardware. MAINTENANCE:

Periodically check to see that rear A-arm guards are securely installed. Re-torque bolts when necessary. Do not operate the vehicle if any bolts or fasteners are loose or missing. CUSTOMER SERVICE:

For further information, please contact PRO ARMOR at 1-951-343-9270. Y057024

Y057024_Grizzly700&550RearAArm_Instructions  

MAINTENANCE: CUSTOMER SERVICE: PREPARARTION: - FORWARD MOUNTING POINT Re-install the retained factory mounting hardware. INSTALLATION INSTRU...

Advertisement