INSTALLATION INSTRUCTIONS YAMAHA YZF 450 Pro Race Grab Bar To avoid injury to yourself or damage to the ATV, read these instructions completely before installation. 1. Parts List: Item 1
Part Name Rear Grab Bar
2. Preparation: a)
Remove and discard the hardware that mounts the OEM Brake/Tail Light To the Rear Grab Bar.
Remove and retain four OE 8mm bolts (2 per side) which mount the OEM Rear Grab Bar to the rear frame.
Remove the OE Rear Grab Bar from the bike.
3. Installation: a) Install your new Rear Grab Bar on bike. b) Re-install the four OE 8mm bolts (2 per side) into mounting holes of Rear Grab Bar. c) Re-torque the four OE 8mm bolts to 25 N-m (18.5 ft-lbs) d) This item is designed to work with a number plate, and will not allow mounting for the OE Tail Light. 4. Maintenance: Periodically check all fasteners for tightness and retorque as required. 5. Care and Cleaning: Clean using a soft cloth and a non-abrasive metal polisher. 6. Customer service: For further information call Pro Armor at 951-343-9270 Y041059
Published on May 22, 2012
YAMAHA YZF 450 Pro Race Grab Bar a) Remove and discard the hardware that mounts the OEM Brake/Tail Light To the Rear Grab Bar. b) Remove and...