Page 1

INSTALLATION INSTRUCTIONS YAMAHA YZF 450 SWING ARM GUARD

To avoid injuries or damage to the ATV, read the following instructions prior to installation. 1.Parts List: Item 1

Part Name Swing Arm Guard

Description Aluminum Guard

Qty 1

2. Preparation: a) Lock parking brake, turn gas petcock to "OFF" position and stand bike upright on rear grab bar. NOTE: Make sure vehicle is secure and will not fall over during installation. b) Remove and retain the four OEM bolts which mount the existing OEM Swing Arm Guard. c) Remove the original OEM Guard. 3. Installation: a) Install (1) Item #1 Swing Arm Guard using the original OEM bolts. b) Re-torque the four original bolts to 12 ft-lbs. 4. Maintenance: Check bolts for tightness and re-torque as required. 5. Cleaning: Rubbing in one direction, use an abrasive pad to restore original finish.

Y041035

Y041035_YFZ450SwingArmArmor04-05_Instructions  

3. Installation: a) Install (1) Item #1 Swing Arm Guard using the original OEM bolts. b) Re-torque the four original bolts to 12 ft-lbs. 2....

Advertisement