Page 1

INSTALLATION INSTRUCTIONS YAMAHA Raptor 660 SWING ARM GUARD To avoid injuries or damage to the ATV, read the following instructions prior to installation. 1.Parts List: Item 1 2 3

Part Name Swing Arm Guard Hex Head Flange Bolt Hex Head Flange Bolt

Description Aluminum Guard M8 x 25mm M6 x 20mm

Qty 1 2 2

2. Preparation: a) Lock parking brake, turn gas petcock to "OFF" position and stand bike upright on rear grab bar. NOTE: Make sure vehicle is secure and will not fall over during installation. b) Remove and discard the four OEM bolts which mount the existing OEM Swing Arm Guard. c) Remove the original OEM Guard. 3. Installation: a) Loosely install (2) Item #2 bolts. b) Loosely install (2) Item #3 bolts. c) Torque Item #2 bolts to 12 ft-lbs. d) Torque Item #3 bolts to 20 ft-lbs. 4. Maintenance: Check bolts for tightness and re-torque as required. 5. Cleaning: Rubbing in one direction, use an abrasive pad to restore original finish. Customer service: For further information call Pro Armor at 951-270-0559

Y022022

Y022022_Rap600SwingArm_Instructions  

2. Preparation: a) Lock parking brake, turn gas petcock to "OFF" position and stand bike upright on rear grab bar. NOTE: Make sure vehicle i...

Advertisement