Page 1

INSTALLATION INSTRUCTIONS A-Arm Guards Suzuki Z400 Please read and understand these instructions completely before installation to avoid injury to yourself or damage to the motorcycle or accessory. Dealer: These instructions contain important information for future reference and must be given to the customer. 1. Parts List: Item 1 2 3 4 5 6 7

Part Name A-Arm Guard A-Arm Guard A010023 PA Hook Bolt, Hex Flange Head Button Head Cap Screw Washer, Flat Nut

Description Left Right Hook .360 M6 x 1.0P x 16mm Long Gr.10.9 M6 x 1.0P x 35mm Long Gr.10.9 M6 M6 Nyloc Nut

Qty 1 1 4 4 2 2 2

2. Preparation: a) Set/Lock rear parking brake on bike, turn gas petcock to 'Off' position and stand bike upright so that it is sitting on the rear grab bar. Make sure vehicle is secure and will not fall over while installing your new Pro Armor A-Arm Guards. 3. Installation: a) Install (1) #5 Button Head Cap Screw, (1) #6 flat washer and (1) #7 nyloc nut supplied into the (1) outside slotted hole. b) Install (2) #3 hooks to the inside of the A-Arm with the (2) #4 flange bolts supplied into the 2 dimpled slotted holes. Only engage a few threads of the bolt into each hook. c) The PRO ARMOR logo should face towards the front of the bike. Position the hooks so that the A-Arm Guards lies flush with the A-Arm Tubes. Then turn the hooks so that the hooks are on top of the tube. Make sure that the rear edge of the A-Arm is up against the A-Arm tube before tightening the bolts. d) Turn handlebar back-n-forth to check for clearance between the front rims and A-Arm Guard. If there is interference, re-orient hooks, re-tighten, and check again. e) Once position and hook orientation are correct, tighten all six supplied bolts to 12 ft-lbs.4. Maintenance: Periodically check all fasteners for tightness and re-torque as required. 5. Care and Cleaning: Clean using a soft cloth and a non-abrasive metal polisher. Customer service: For further information call Pro Armor at 951-270-0559 S042020

S042020_LTZ400-KFX400-DVX400_AArmArmor_Instructions  

Customer service: For further information call Pro Armor at 951-270-0559 S042020 Dealer: These instructions contain important information fo...

Advertisement