YAMAHA YFZ-450R/X ProAm FRONT BUMPER (Y099481) INSTALLATION INSTRUCTIONS
Please read these instructions carefully before installation to prevent injury to yourself or damage to your ATV. PARTS LIST: PART 1
DESCRIPTION FRONT BUMPER
1. Remove the factory front grab bar from the vehicle. Retain the (4) factory mounting bolts.
1. Position the ProAm front bumper in place of the factory front grab bar. Align the mounting holes of the front bumper to the mounting points on the vehicleâ€™s frame and loosely re-install the retained factory mounting bolts. With all mounting points located and mounting hardware loosely installed, tighten down the mounting bolts securing the front bumper to the frame of the vehicle.
Periodically check to see that the front bumper is properly installed. Re-torque bolts and fasteners when needed. Do not operate the vehicle if any bolts or fasteners are loose or missing.
For further information, please contact PRO ARMOR at 1-951-343-9270. Y099481
Published on May 22, 2012
Periodically check to see that the front bumper is properly installed. Re-torque bolts and fasteners when needed. Do not operate the vehicle...