Page 1

SUZUKI LT-R450, LT-Z400 ProAm FRONT BUMPER (S061481) INSTALLATION INSTRUCTIONS

Please read these instructions carefully before installation to prevent injury to yourself or damage to your ATV. PARTS LIST: PART 1

DESCRIPTION FRONT BUMPER

QTY 1

HARDWARE KIT PART 2 3 4

DESCRIPTION M8 x 25mm HEX BOLT .250” SPACER 8mm SPACER

QTY 2 2 2

2

3

4

1

PREPARATION:

1. Remove the factory front bumper from the vehicle retaining the (4) mounting bolts. INSTALLATION:

1. Position the Pro Am front bumper in place of the factory bumper aligning the mounting holes to the mounting points on the frame of the vehicle. Loosely re-install the (2) retained mounting bolts at the lower mounts.

Upper Mounts: Loosely install (1) .250” spacer between the upper mount and the frame of the vehicle. Fasten down by loosely installing (1) 8mm spacer with (1) M8 x 25mm hex bolt. Do this for both (2) upper mounts. NOTE: LT-Z400 Applications will not require the use of the spacers.

2. With all mounting points located and hardware loosely installed, tighten the mounting bolts securing the front bumper to the frame of the vehicle. MAINTENANCE:

Periodically check to see that the front bumper is securely installed. Re-torque bolts when necessary. Do not operate the vehicle if any hardware is loose or missing. CUSTOMER SERVICE:

For further information, please contact PRO ARMOR at 1-951-343-9270.

S061481

ProAm_S061481_LTR450-LTZ400_FrontBumper_Instructions  

Periodically check to see that the front bumper is securely installed. Re-torque bolts when necessary. Do not operate the vehicle if any har...

Advertisement