Page 1

HONDA TRX450R ProAm A-ARM GUARDS (H042420) INSTALLATION INSTRUCTIONS

Please read these instructions carefully before installation to prevent injury to yourself or damage to your ATV. PARTS LIST: PART 1 2 3 4 5

DESCRIPTION A-ARM GUARD (L) A-ARM GUARD (R) MOUNTING HOOK (LARGE) MOUNTING HOOK (SMALL) M6 x 16mm FLANGE HEX BOLT

QTY 1 1 2 4 6

5

1

2 4

3

INSTALLTION:

1. Position the left front A-arm guard beneath the vehicle’s left A-arm and install the mounting hardware as shown in the diagram below. Wrap the mounting hooks over the A-arm tubing and fasten them down by installing the supplied mounting bolts through the A-arm guard into the threaded mounting hooks. Outer mount– Install (1) large mounting hook and (1) M6 x 16mm flange hex bolt Inner mounts– Install (1) small Mounting hook and (1) M6 x 16mm flange hex bolt for each.

2. With all mounting hooks and mounting bolts loosely installed, tighten down the bolts securing the A-arm guard to the vehicle’s A-arm. 3. Repeat the procedure for the right A-arm guard on the vehicle’s right A-arm.

MAINTENANCE:

Periodically check to see that the A-arm guards are securely installed. Re-torque bolts where necessary. Do not operate the vehicle if any hardware is loose or missing. CUSTOMER SERVICE:

For further information, please contact PRO ARMOR at 1-951-343-9270.

H042420

ProAm_H042420_TRX450RAArmGuards_Instructions  

ProAm A-ARM GUARDS (H042420) MAINTENANCE: 1. Position the left front A-arm guard beneath the vehicle’s left A-arm and install the mounting h...

Advertisement