POLARIS RAZR (P081024) REAR A-ARM GUARDS INSTALLATION INSTRUCTIONS Please read these instructions carefully before installation to avoid injury to yourself or damage to your UTV. PARTS LIST: ITEM
1 LEFT REAR A-ARM GUARD 1 2
RIGHT REAR A-ARM GUARD SELF TAPPING SCREW
PREPARATION: 1. Set the vehicle in park, and lift up the rear of the RAZR using a floor jack. 2. Loosen the bolts and remove the rear wheels from the RAZR. 3. Remove the stock plastic guards from the rear A-arms retaining the mounting hardware. INSTALLATION: 1. Position the left rear A-arm guard under the left rear A-arm of your RAZR aligning the mounting holes of the guard to the mounting points on the A-arm. 2. Re-install the retained mounting hardware on the front mounting points of the A-arm guard. 3. Install (2) self tapping screws at the rear mounting points of the A-arm guard securing the guard to the vehicle. 4. Repeat procedures 1-3 for the right rear A-arm guard on the right side of your RAZR. 5. Re-install the rear wheels on your RAZR and lower the vehicle. Make sure that the wheel bolts are on tight. Do not operate the vehicle if these bolts are loose. CUSTOMER SERVICE: For further information, please contact PRO ARMOR at 1-951-270-0559.