Page 1

POLARIS RAZR (P081020) FRONT A-ARM GUARDS INSTALLATION INSTRUCTIONS Please read these instructions carefully before installation to avoid injury to yourself or damage to your UTV. PARTS LIST: ITEM #

DESCRIPTION

QTY

1

1 FRONT LEFT A-ARM GUARD

2

1 FRONT RIGHT A-ARM GUARD

3

HARDWARE KIT

M6 x 16MM BOLT – QTY:4

1

MOUNTING HOOK – QTY:4

PREPARATION:

Remove the stock plastic A-arm guards from the vehicle retaining the mounting screws from each side. INSTALLATION:

1. Position the front left A-arm guard under the lower left A-arm of the vehicle. Line up the front mounting holes of the A-arm to the mounting holes of the A-arm guard. Loosely install (2) of the retained stock mounting screws. 2. Loosely install (2) mounting hooks to the A-arm guard using (2) M6 x 16MM bolts. Position the A-arm guard so that both mounting hooks wrap over the tubing of the lower A-arms. 3. When the A-arm guard is mounted at all of its points, tighten down the bolts and fasteners securing the A-arm guard to the A-arms of the vehicle. 4. Repeat procedures 1-3 for the front right A-arm guard on the right side of your RAZR.

FRONT LEFT A-ARM GUARD INSTALL STOCK MOUNTING SCREWS

CUSTOMER SERVICE:

For further information, please contact Pro Armor at 1-951-270-0559. P081020

P081020_ RZRFrontAArm_Instructions  

POLARIS RAZR (P081020) FRONT A-ARM GUARDS CUSTOMER SERVICE: PREPARATION: INSTALLATION: INSTALLATION INSTRUCTIONS PARTS LIST: FRONT RIGHT A-A...

Advertisement