Page 1

KTM 450 XC PRO XC BUMPER (KT80069) INSTALLATION INSTRUCTIONS Please read these instructions carefully before installation to avoid injury to yourself or damage to your ATV. PARTS LIST: PART

DESCRIPTION

QTY

1

1

PRO XC BUMPER PREPARATION: Remove the factory front grab bar and retain the mounting hardware. INSTALLATION: 1. Position the Pro XC Bumper in place of the factory grab bar and align its mounting points to the mounting points on the vehicles frame. 2. Mount the Pro XC bumper to the frame of the vehicle by loosely re-installing the factory mounting hardware at the upper and lower mounts of the bumper. Use the lower holes on the bumper to access the lower mounting hardware and fastening tool. With all mounting points located and hardware loosely installed tighten down on the mounting hardware securing the bumper to the frame of the vehicle. MAINTENANCE: Periodically check the tightness of the mounting hardware. Re-torque bolts if necessary. Do not operate the vehicle if any bolts or fasteners are loose or missing. CUSTOMER SERVICE: For further information, please contact Pro Armor at 1-951-343-9270

KT80069

KTM_KT80069_ProXCBumper_Instructions  

MAINTENANCE: CUSTOMER SERVICE: INSTALLATION INSTRUCTIONS PREPARATION: INSTALLATION: PRO XC BUMPER KT80069 For further information, please co...