HONDA TRX700XX BULLHORN BUMPER (H085040) INSTALLATION INSTRUCTIONS Please read these instructions carefully before installation to prevent injury to yourself or damage to your ATV. PARTS LIST: ITEM 1
DESCRIPTION BULLHORN BUMPER
M8 x 20mm BOLT
M8 x 25mm BOLT
1 2, 3
PREPARARTION: Remove the factory plastic front bumper from the vehicle and discard the mounting hardware. INSTALLATION: 1. 2. 3.
Position the Pro Armor Bullhorn bumper in place of the un-installed factory plastic front bumper. Align the 3 bumper mounting holes to the 3 mounting points located on the vehicleâ€™s frame, and loosely install (2) M8 x 20mm bolt at each upper mounting point and (1) M8 x 25mm at the lower. With all mounting points located and mounting hardware loosely installed, tighten down the bolts securing the Bullhorn bumper to the frame of the vehicle.
MAINTENACE: Periodically check to see that all bolts and fasteners are securely installed. Do not operate the vehicle if any bolts or fasteners are loose or missing. CUSTOMER SERVICE: For further information, please contact PRO ARMOR at 1-951-343-9270.
Published on May 21, 2012
Periodically check to see that all bolts and fasteners are securely installed. Do not operate the vehicle if any bolts or fasteners are loos...