Page 1

CAN-AM OUTLANDER (CA56124) TRAILING ARM GUARDS INSTALLATION INSTRUCTIONS Please read these instructions carefully before installation to prevent injury to yourself or damage to your vehicle. PARTS LIST: ITEM DESCRIPTION 1 LEFT TRAILING ARM GUARD 2 RIGHT TRAILING ARM GUARD 3 SELF-TAPPING SCREW

QTY 1 1 8

2

1

3

PREPARATION:

1. Jack up the vehicle and remove the rear wheels to access the mounting locations. Using a power drill, drill out the rivets that fasten down the factory trailing arm guards. Remove the plastic factory trailing arm guards. INSTALLATION:

1. Position the rear left trailing arm guard under the vehicle’s rear left trailing arms in place of the factory guards. Align the guard mounting points to the mounting holes located on the vehicle’s trailing arm. Install (1) self-tapping screw at each of the (4) mounting points. 2. Repeat the procedure for the rear right trailing arm guard on the right side of the vehicle. Re-install the vehicle’s wheels and lower the vehicle to ground level.

Left Trailing Arm Shown Left Trailing Arm Guard

Self-Tapping Screw

MAINTENANCE:

Periodically check to see that the trailing arm guards are properly installed. Re-torque mounting bolts when necessary. Do not operate the vehicle if any bolts or fasteners are loose or missing. CUSTOMER SERVICE:

For further information, please contact Pro Armor at 1-951-343-9270. CA56124

CA56124_TrailingArmGuards_Instructions  

Periodically check to see that the trailing arm guards are properly installed. Re-torque mounting bolts when necessary. Do not operate the v...

Advertisement