Page 1

CAN-AM OUTLANDER (CA56123) REAR SKID PLATE INSTALLATION INSTRUCTIONS Please read these instructions carefully before installation to prevent injury to yourself or damage to your vehicle. PARTS LIST: ITEM DESCRIPTION 1 REAR SKID PLATE 2 VIBRATION STRIP

2

QTY 1 2

1

PREPARATION:

1. Be sure that the mounting brackets included in the mid skid plate kit is properly installed on the vehicle before installing the rear skid plate. The rear skid plate must be installed before the mid and front skid plates.

Forward Mounting Points Vibration Strips

INSTALLATION:

Rear Mounting Points

1. Place the (2) supplied adhesive vibration strips on the top surface of the rear skid plate as shown. 2. Remove and retain the (2) factory rear bolts and nuts from the vehicle’s frame shown to the below. Position the rear mounting points of the rear skid plate in place. Loosely re-install the factory bolts nuts. Rear Frame Section

Tow Mount

Remove (2) Factory Nuts Bolts

MAINTENANCE:

Periodically check to see that the rear skid plate is properly installed. Re-torque mounting bolts when necessary. Do not operate the vehicle if any bolts or fasteners are loose or missing. CUSTOMER SERVICE:

For further information, please contact Pro Armor at 1-951-343-9270.

CA56123

CA56123_RearSkid_Instructions  

CUSTOMER SERVICE: PREPARATION: INSTALLATION: 1. Place the (2) supplied adhesive vibration strips on the top surface of the rear skid plate a...

Advertisement