Page 1

PRO VAULT UNIVERSAL HARD MOUNT (A001212) INSTALLATION INSTRUCTIONS Please read these instructions before installation to avoid injury to yourself or damage to your ATV. INCLUDED IN KIT:

(1) UNIVERSAL HARD MOUNT, (1) LOCKING PIN, (2) MOUNTING BOLTS AND (2) NUTS .

NOTE: The Pro Vault Universal Hard Mount is designed to mount directly to any surface on your ATV or vehicle. Keep in mind that the surface or material chosen to mount to may only be as thick as to allow the bolts to screw into the nuts. INSTALLATION: 1. Remove and retain the nuts and bolts supplied in your kit. 2. Position the hard mount to a suitable desired location and mark the mounting surface through the holes of the hard mount. Drill holes at the marked locations. 3. Re-install the nuts and bolts to secure the hard mount to the ATV. 4. To install your Pro Vault iPod holder, remove the locking pin from the hard mount, slide the backing of the iPod holder into the slot of the hard mount and re-install the locking pin. APPLICATIONS: A001212 Universal Hard Mount is compatible with the following ProVault iPod holders: A001200 (Billet 30GB ProVault), A001201 (Billet 1st Gen. Nano ProVault), A001202 (Billet 60GB/80GB ProVault) and the A001203 (Billet 2nd Gen. Nano Pro Vault). The 30, 60 and 80 GB iPods should not be used in off-road environments and should not be exposed to heavy vibrations that may damage the iPod. For off-road applications, the iPod Nanos are suitable for use. When using your iPod, never have the volume to where you are not able to hear the surrounding noises. CUSTOMER SERICE: For further information, please contact Pro Armor at 951-270-0559.


A001212

A001212_iPodUniversalHardMount_ Instructions  

CUSTOMER SERICE: INCLUDED IN KIT: The 30, 60 and 80 GB iPods should not be used in off-road environments and should not be exposed to heavy...