Page 1

PRIME ADHERE

— A high performance, single component, polyacrylic-based elastoplastic sealer and adhesive suitable for both indoor and outdoor use —

PRODUCT DESCRIPTION: PRIME ADHERE is a unique gunnable sealant that works under demanding conditions where other sealants fail. In damp conditions where oil or water may be present, PRIME ADHERE will grip to the surface and retain its hold. The unique formulation of PRIME ADHERE makes it the perfect choice for sealing metal roofs and siding. It is also highly suitable for use in the marine industry. PRIME ADHERE is designed to handle situations where movement and temperature variations are major factors.

BENEFITS: •  Bitumen compatible  •  Environmentally friendly  •  Compatible with paints  •  Paintable one hour after application   •  Weather resistant  •  Long-lasting  •  UV resistant  •  Adheres to all substrates, even on non­­­porous and damp substrates

Where to use: New & Old Concrete  •  Most Masonry Surfaces  • Brickwork • Plaster • Gypsum • Anodized alum­i­­num  • Hard PVC • Most Masonry Surfaces • Heating & air conditioning ducts • Flashings •  Plastic pipes for more information, contact us directly at: 1111 West Holly Street, Suite H Bellingham, Washington 98225 USA Phone: 1.360.656.5183 Fax: 1.360.335.6879 E-mail: info@primesealants.com Web: www.primesealants.com


PRIME ADHERE

— Sticks to Damp Surfaces Where Other Sealants Fail —

P

rime Adhere is a high performance, single component, polyacrylic-based elastoplastic sealer and adhesive suitable for both indoor and outdoor use, with 10 percent maximum movement tolerance. It is specifically designed for use in demanding applications where dampness, movement and temperature are major factors. Adhere delivers outstanding adhesion performance even in humid substrates where oil and gas are present. Like all Prime products, Prime Adhere is a “Best in Class Problem Solver.”

Prime Adhere offers these special qualities and more: ◊ ◊ ◊ ◊ ◊ ◊ ◊ ◊ ◊ ◊ ◊ ◊

Bitumen compatible Free of isocyanate and silcone Environmentally friendly Compatible with paints (in accordance with DIN 52452-4, A1 & A2) Weather-resistant Aging-resistant Good UV resistance Long shelf-life Perfect for permanent air-tight bonding of vapour barrier sheets in roofing applications Adheres to almost all substrates, even on non-porous humid substrates Available in 6 colors:  Clear, White, Gray, Black, Brown & Tan Paintable within 1 hour


PRIME ADHERE – 2 Prime Adhere has been specifically designed for use in the permanent air-tight bonding of connecting joints and overlaps between roofs and walls with moderate movement stress, including on the following surfaces: ◊ ◊ ◊ ◊ ◊ ◊ ◊ ◊

Concrete Masonry Brickwork Plaster Gypsum Wood Anodised aluminium Hard PVC

The following are a few of many examples of areas of applications where Prime Adhere may be used: ◊ ◊ ◊ ◊ ◊ ◊ ◊ ◊ ◊ ◊ ◊ ◊ ◊ ◊

Sealing and jointing Roofing felts Joints around doors Joints around dormer windows Door jams Vents Gutters Siding Roofs Flashing Plastic pipes Heating & air conditioning ducts Problem surfaces such as galvanized metal, plaster & gypsum (see above) In the marine industry: ◊ Portholes ◊ Seams ◊ Instrument panels ◊ Deck hardware ◊ Transoms

NOTE:  Prime Adhere must not be used in the sanitary sector or on marble or natural stone. Also, Prime Adhere can damage polycarbonate surfaces and must not be allowed to come into contact with anything using polycarbonate materials.


PRIME ADHERE – 3 Yield One 10.5 ounce tube (310 ml) of Prime Adhere is sufficient for completing about 31.5 feet (9.6 meters) of joints measuring 1⁄4 inch x 1⁄4 inch (6.25mm x 6.25mm) or about 7 1⁄2 feet (2.25 meters) of joints measuring 1⁄2 inch x 1⁄2 inch (12.7mm x 12.7mm). Prime Adhere is available is six different colors: ◊ ◊ ◊ ◊ ◊ ◊

Clear White Gray Black Brown Tan

Packaging Prime Adhere is available in 10.5 ounce (310 ml) cartridges, packed in cases of 20. Application Information Substrate pretreatment:  The substrate must be firm and free of dust and grease. Before applying Prime Adhere, remove all cement slurry, mold release agents and impregnations. In renovation projects, old sealants and remains of paint and loose material must be fully removed. The joint must always be provided with a suitable, correctly dimensioned joint backing, e.g. PE cord or PE sheeting, to prevent adhesion on three faces. To avoid contamination and to achieve a precise joint, we recommend masking the joint edges with adhesive tape before primer application and filling. Joint dimensions:  For joint widths of a minimum of .2 inches (5 mm), a square cross-section is advised. For wider joints (up to 1 inch [25 mm] maximum), the joint depth should be equal to half the joint width in accordance with DIN 18540, Sheet 3. Make sure that triangular bevels have uniform sides of equal length with at least 1⁄4 inch (7 mm) of bonding surface. Smoothing:  After applying the sealant with a suitable manual, battery-powered or pneumatic caulking gun, the sealant can be smoothed in the joint with water or with a neutral, non-staining waterbased smoothing agent and a suitable tool (e.g. jointing trowel). Any adhesive tape used can be removed immediately after smoothing.


PRIME ADHERE – 4 Important information:  Clean tools with solvent immediately after use. Cured sealant must be removed mechanically. Remaining residues can be softened with solvent and wiped off some time later. The product cures by means of drying. High humidity, low temperature and joint depth above 9⁄16 inch (15 mm) can delay skin formation and curing significantly. During drying, the color will slightly change. The product is compatible with most paint systems. Owing to the large number of different coating systems on the market, we nevertheless recommend that you conduct yourown tests concerning compatibility and adhesion prior to application. Joints subject to expansion must not be overpainted, since most paint systems will crack due to their lower elasticity (compared to the sealant). If joints with low movement are overpainted, the sealant must be allowed to dry for at least seven days. The function of the product can only be guaranteed if correctly applied in accordance with the technical recommendations given in this data sheet and in related standards. Sealant application in situations with strongly fluctuating temperatures (premature stressing of the sealant) should be avoided. Technical Data (Metric)

Rate of curing depends on temperature, humidity and substrate absorbency. The data given refer to tests at standard conditions (73°F [23°C] / 50 percent relative humidity). Under these conditions, a 3⁄8 inch x 3⁄8 inch (10 mm x 10 mm) joint will cure in approximately 14 days (with at least one substrate being absorbent). Low temperature, high humidity and joint depth above 9⁄16 inches (15 mm) will retard skin formation and curing significantly.


PRIME ADHERE – 5 Data given were determined shortly after production, and may slightly vary with increasing age of product and for different colors. They are not meant for specifications purposes. For safety data, see the Safety Data Sheet Take all measures resulting from the safety data sheet and hazard markings to prevent accidents and protect health. Information given in this data sheet is based on the current state of knowledge. This does not exempt the purchaser from carrying out his own careful inspections of incoming goods in individual cases. We reserve the right to make changes to the product data in the course of technical progress or due to operationally related further development. Owing to factors beyond our control during application, recommendations given in this data sheet require tests and experiments by the customer. Our recommendations do not exempt the customer from the obligation to check any infringements of thirdparty rights himself and eliminate them if necessary. The suggestions for product use are not equivalent to a warranty of its suitability for the recommended purpose. For more information, contact:

PRIME SEALANTS

1111 West Holly Street, Suite H Bellingham, Washington 98225 USA Phone: 1.206.656.5183 Fax: 1.360.335.6879 Email: info@primesealants.com Web: www.primesealants.com


MATERIAL SAFETY DATA SHEET SECTION I — ­ supplier & product information Product Identification:  Prime Adhere Product Class:  Single component, solvent-based acrylic sealant and adhesive Trade Name:  Prime Adhere DOT Shipping Name: N/A Formula Version Number:  1 MSDS Preparation Date:  10 June 2013 Supplier Name:  VJ Ventures, Inc. d.b.a. Prime Sealants Supplier Address:  1111 West Holly Street, Suite H, Bellingham, Washington 98225 USA Supplier Telephone: 1.360.656.5183 Supplier Fax: 1.360.335.6879 Supplier Emergency 24-Hour Telephone: 1.360.656.5183 Chemical Name:  Acrylic sealant

SECTION Ii ­— composition / information on ingredients CHEMICAL & COMMON NAME

CAS NUMBER WEIGHT (%) OSHA PEL

Acetic Acid Ethyl Esther

141-78-6

<20%

ACHIH TLV

Not established Not established

No other hazardous ingredients. This product should not be considered a hazardous material. Product is not considered a flammable liquid.

SECTION IiI — hazards identification Emergency Overview:  White paste. Prolonged exposure may cause mild eye irritation, mild skin irritation and digestive tract irritation. Due to high pH alkilinity of product, release of product into surface water may be harmful to aquatic life. Noncombustible. Eye Contact: Possible:  Causes moderate irritation to the eyes.

Material Safety Data Sheet — Prime Adhere — page 1 of 4


Skin Contact: Possible:  May cause mild irritation to the skin. Inhalation: Possible:  Only after prolonged exposure. Ingestion: Possible:  May cause irritation to mouth, esophagus & stomach.

SECTION Iv — FIRst aid measures Eye:  In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Seek immediate medical attention. Skin:  In case of contact, immediately flush skin with plenty of water. Inhalation:  Remove to fresh air. Seek medical attention. Administer oxygen if breathing becomes difficult. Ingestion:  If swallowed, DO NOT induce vomiting. Seek immediate medical attention. If victim is fully conscious, give a cupful of water. Never give anything by mouth to a person who is unconscious.

SECTION V — fire-fighting measures Flash Point (°F): Non-combustible. Flammable Limits:  This material is non-combustible. Extinguishing Media:  This material is compatible with all extinguishing media. Fire-fighting Equipment:  The following protective equipment for fire fighters is recommended when this material is present in the area of a fire:  chemical goggles; body-covering protective clothing; chemical-resistant gloves; and rubber boots.

SECTION Vi — accidental release measURES Environmental Hazard:  High pH (alkalinity) of undiluted or unneutralized material. Spillage:  Sinks in but does not mix with water. Waste Disposal Method:  Not an RCRA Hazardous waste. Dispose of according to local, state, and federal regulations.

SECTION Vii — handling & storage Handling:  Avoid contact with eyes, skin and clothing. Avoid breathing for extended periods. Keep container closed. Promptly clean residue from closures with cloth dampened with water. Promptly clean up spills. Keep containers closed.

Material Safety Data Sheet — Prime Adhere — page 2 of 4


Storage:  Keep cartridges tightly closed when not in use. Do not transfer from original cartridges into other containers. Recommended storage temperature 5º-35º C (41º-96º F). Keep away from children. Avoid contact with heat sources and open flames.

SECTION ViiI — exposure control/personal protection Engineering Controls:  Use with adequate ventilation. Keep containers closed when not in use. Respiratory Protection:  None is necessary if used with adequate ventilation. Skin Protection:  Wear protective gloves when possibility of contact exists. Eye Protection:  Use of protective eye goggles is recommended. Protective Clothing:  Use of protective clothing is recommended to avoid damage to regular clothing.

SECTION IX — physical & chemical properties Appearance & Odor:  Paste. Varies in color. Characteristic odor. Specific Gravity: ≈1 Vapor Pressure:  11 millibars (hPA) / .16 psi Flammability Limits % – Lower: 1.2; – Upper: 7.5  Autoflammability (°F): 698°F Boiling Point (°F): 261°F

SECTION X ­­— Stability & Reactivity Stability:  This material is stable under all conditions of use and storage. Conditions to Avoid: None. Materials to Avoid: None. Hazardous Decomposition Products: Hydrogen.

SECTION XI ­­— toxicological information Acute Data: N/A. Subchronic Data: N/A Special Studies: N/A

Material Safety Data Sheet — Prime Adhere — page 3 of 4


MATERIAL SAFETY DATA SHEET SECTION I — ­ supplier & product information Product Identification:  Prime Adhere Product Class:  Single component, solvent-based acrylic sealant and adhesive Trade Name:  Prime Adhere DOT Shipping Name: N/A Formula Version Number:  1 MSDS Preparation Date:  10 June 2013 Supplier Name:  VJ Ventures, Inc. d.b.a. Prime Sealants Supplier Address:  1111 West Holly Street, Suite H, Bellingham, Washington 98225 USA Supplier Telephone: 1.360.656.5183 Supplier Fax: 1.360.335.6879 Supplier Emergency 24-Hour Telephone: 1.360.656.5183 Chemical Name:  Acrylic sealant

SECTION Ii ­— composition / information on ingredients CHEMICAL & COMMON NAME

CAS NUMBER WEIGHT (%) OSHA PEL

Acetic Acid Ethyl Esther

141-78-6

<20%

ACHIH TLV

Not established Not established

No other hazardous ingredients. This product should not be considered a hazardous material. Product is not considered a flammable liquid.

SECTION IiI — hazards identification Emergency Overview:  White paste. Prolonged exposure may cause mild eye irritation, mild skin irritation and digestive tract irritation. Due to high pH alkilinity of product, release of product into surface water may be harmful to aquatic life. Noncombustible. Eye Contact: Possible:  Causes moderate irritation to the eyes.

Material Safety Data Sheet — Prime Adhere — page 1 of 4


Skin Contact: Possible:  May cause mild irritation to the skin. Inhalation: Possible:  Only after prolonged exposure. Ingestion: Possible:  May cause irritation to mouth, esophagus & stomach.

SECTION Iv — FIRst aid measures Eye:  In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Seek immediate medical attention. Skin:  In case of contact, immediately flush skin with plenty of water. Inhalation:  Remove to fresh air. Seek medical attention. Administer oxygen if breathing becomes difficult. Ingestion:  If swallowed, DO NOT induce vomiting. Seek immediate medical attention. If victim is fully conscious, give a cupful of water. Never give anything by mouth to a person who is unconscious.

SECTION V — fire-fighting measures Flash Point (°F): Non-combustible. Flammable Limits:  This material is non-combustible. Extinguishing Media:  This material is compatible with all extinguishing media. Fire-fighting Equipment:  The following protective equipment for fire fighters is recommended when this material is present in the area of a fire:  chemical goggles; body-covering protective clothing; chemical-resistant gloves; and rubber boots.

SECTION Vi — accidental release measURES Environmental Hazard:  High pH (alkalinity) of undiluted or unneutralized material. Spillage:  Sinks in but does not mix with water. Waste Disposal Method:  Not an RCRA Hazardous waste. Dispose of according to local, state, and federal regulations.

SECTION Vii — handling & storage Handling:  Avoid contact with eyes, skin and clothing. Avoid breathing for extended periods. Keep container closed. Promptly clean residue from closures with cloth dampened with water. Promptly clean up spills. Keep containers closed.

Material Safety Data Sheet — Prime Adhere — page 2 of 4


Storage:  Keep cartridges tightly closed when not in use. Do not transfer from original cartridges into other containers. Recommended storage temperature 5º-35º C (41º-96º F). Keep away from children. Avoid contact with heat sources and open flames.

SECTION ViiI — exposure control/personal protection Engineering Controls:  Use with adequate ventilation. Keep containers closed when not in use. Respiratory Protection:  None is necessary if used with adequate ventilation. Skin Protection:  Wear protective gloves when possibility of contact exists. Eye Protection:  Use of protective eye goggles is recommended. Protective Clothing:  Use of protective clothing is recommended to avoid damage to regular clothing.

SECTION IX — physical & chemical properties Appearance & Odor:  Paste. Varies in color. Characteristic odor. Specific Gravity: ≈1 Vapor Pressure:  11 millibars (hPA) / .16 psi Flammability Limits % – Lower: 1.2; – Upper: 7.5  Autoflammability (°F): 698°F Boiling Point (°F): 261°F

SECTION X ­­— Stability & Reactivity Stability:  This material is stable under all conditions of use and storage. Conditions to Avoid: None. Materials to Avoid: None. Hazardous Decomposition Products: Hydrogen.

SECTION XI ­­— toxicological information Acute Data: N/A. Subchronic Data: N/A Special Studies: N/A

Material Safety Data Sheet — Prime Adhere — page 3 of 4


SECTION XII ­­— ecological information Ecotoxicity:  This product has not been tested for ecotoxicity potential. Environmental Fate:  The high pH of this material may be harmful to aquatic life. It does not contribute to BOD. Physical/Chemical:  Sinks into and but does not mix with water.

SECTION XIII ­­— disposal considerations Classification:  Disposed material is not a hazardous waste. Disposal Method:  Dispose in accordance with federal, state and local regulations and permits.

SECTION XIV — ­­ transport information DOT UN Status:  This material is not regarded as a hazardous material for transportation.

SECTION XV ­­— regulatory information CERCLA:  No CERCLA Reportable Quantity has been established for this material. SARA Title III:  Not regarded as an Extremely Hazardous Substance under §302. Not regarded as a Toxic Chemical under §313. Hazard categories under §311 and §312: Acute. TSCA:  All ingredients of this material are listed in the TSCA Inventory.

SECTION Xvi ­­— other information Prepared By: VJVI-JHO.

Material Safety Data Sheet — Prime Adhere — page 4 of 4


PRIME ADHERE WARRANTY


Prime Adhere  

PRIME ADHERE is a unique gunnable sealant that works under demanding conditions where other sealants fail. In damp conditions where oil or w...

Advertisement
Read more
Read more
Similar to
Popular now
Just for you