a product message image
{' '} {' '}
Limited time offer
SAVE % on your upgrade

Page 1

Equipment

2019

155 Liberty Avenue, Brooklyn NY 11212

E-mail: sales@premiumplususa.com Website: www.premiumplususa.com

C01 LED CURING LIGHT (5 WATTS) fibre optic light guide 135º contra angle

TWO YEAR WARRANTY

440~480 nm 1100-1200 mw/cm²

fibre optic light guide 135º

063 Light Protective Hand Shield $19.95

C10 LED Light Meter $59.95

• Radiant intensity: 1100~1200 mw/cm² • Automatic compensation circuit for constant power output • Range of wavelength: 440~480 nm • Five modes of working time: 5, 10, 15, 20, 25 seconds • A full charge of battery can be used more than 100 times when set at 10 second • Three working modes: Full, Ramping, Pulse working time mode • Direct charging option from transformer for easy transportation and mobility C01 LED Curing Light 135° Contra Angle ..... $199.95 • Autoclavable light guide 8 mm C01-1 Light Guide (autoclavable) .................... $39.95 • Complete with protective light shield and light sleeves (100 pcs) 123SS Curing Light Sleeves, 500 pcs/box ...... $19.95 • Size: length 9½” x dia 11/ 8” • Weight: 160 gm and Black • Colors: Lavender, Light Blue, Green, Light Green, Lime, Yellow, Pink,

For every C01/C02 Curing Light purchased get one C10 Light Meter + 063 Hand Shield For every two C01/C02 Curing Lights purchased get one C01/C02 Curing Light + one C10 Light Meter + 063 Hand Shields (3pcs)

C02 LED CURING LIGHT (5 WATTS) direct light source head 90º right angle TWO YEAR WARRANTY

440~480 nm 750-1600 mw/cm²

direct light source head 90º

063 Light Protective Hand Shield $19.95

C10 LED Light Meter $59.95

• Direct light source head 90° for easy access to limited space areas • Radiant intensity: 750~1600 mw/cm² • Range of wavelength: 440~480 nm • A full charge of battery can be used more than 100 times when set at 10 second working time mode • Direct charging option from transformer for easy transportation and mobility • Complete with protective light shield and light sleeves (100 pcs) • Size: length 9¼” x dia 11/ 8” • Weight: 160 gm • Colors: Lavender, Light Blue, Green, Light Green, Lime, Yellow, Pink and

• Automatic compensation circuit for constant power output • Five modes of working time: 5, 10, 15, 20, 25 seconds • Three working outputs: 100%, 75%, 50% C02 LED Curing Light 90° Right Angle ................ $199.95 C02-1 Direct Light Source Head 90° ....................... $49.95 C02-2 Light Head Protective Caps, 5 pcs/pack .... $14.95 C02-3 Head Protective Rings, 6 pcs/pack ............. $14.95 125SS Curing Light Sleeves, 500 pcs/box ............. $19.95

For every C01/C02 Curing Light purchased get one C10 Light Meter + 063 Hand Shield For every two C01/C02 Curing Lights purchased get one C01/C02 Curing Light + one C10 Light Meter + 063 Hand Shields (3pcs)

order hot line - tel: 1-877-226-2288

sales@premiumplususa.com

www.premiumplususa.com


C01 Curing Lights

C01 LED CURING LIGHTS with fibre optic light guides C01 SPECIFICATIONS C01-C (classic)

F.O. LIGHT GUIDE

8 mm ( dia. )

LIGHT WAVELENGTH

440~480 nm

440~480 nm

390~430 nm 440~480 nm

APPLICATION

General

Ortho / General

General / Ortho

MODE

AUTOCLAVABLE FIBRE OPTIC LIGHT GUIDE CAN BE ROTATED 360º

Model

C01-S (super power)

C01-D (dual range)

11 mm ( dia. )

TACK

N/A

2,000 mW/cm² for 1 second±10%

TURBO

1,500 mW/cm² for 5 seconds ±10%

2,000 mW/cm² for 4 seconds±10%

3’ + 3’

N/A

2,000 mW/cm² for 3 + 3 seconds±10%

(with 1 second blink in between)

6’ + 6’

N/A

1,500 mW/cm² for 6 + 6 seconds±10%

(with 1 second blink in between)

FULL

1,200 mW/cm² for 5, 10, 15, 20 seconds±10%

RAMP

1st five seconds from 0�1,200 mW/cm²

SOFT CURE

1st five seconds from 0�900 mW/cm²

next 5, 10, 15, 20 seconds 1,200 mW/cm²±10% next 5, 10, 15, 20, 25 seconds 900 mW/cm²±10%

C01 Complete Set with Built-In Light Intensity Indicator

ON/OFF switch AUTOMATIC COMPENSATION CIRCUIT FOR CONSTANT POWER OUTPUT

display screen time switch mode indicators mode switch

24 MONTH WARRANTY charging station

light intensity indicator

FULLY COVERED MEMBRANE PANEL FOR EASY CLEANING AND INFECTION CONTROL

SIZE: L265 x Dia.27 (mm) WEIGHT:205 gms

063 Protective Hand Light Shield $19.95

C01-C Curing Light ( Classic ) with 8 mm Light Guide .............. $249.95 C01-S Curing Light ( Super Power ) with 11 mm Light Guide ... $399.95 C01-D Curing Light ( Dual Range ) with 11 mm Light Guide ..... $399.95 C01-C-1 8 mm Fibre Optic Light Guide ......................................... $39.95 C01-S/D-1 11 mm Fibre Optic Light Guide ................................... $99.95 C01/2-1 Replacement Battery ....................................................... $49.95 123S Light Sleeves Small ( for C01-C ) 500 pcs/box .................... $19.95 123L Light Sleeves Large ( for C01-S/C01-D ) 500 pcs/box ....... $24.95

For every C01 Curing Light purchased (any model) get one 063 Hand Shield For every two C01 Curing Lights purchased (same model) get one C01 Curing Light (same model) + three 063 Hand Shields

REPLACEABLE BATTERY OPENING

2

sales@premiumplususa.com

www.premiumplususa.com


C01 Curing Lights

1600 1400 1200 1000

1800 1600 TURBO 1500 mW/cm²

1400

FULL 1200 mW/cm²

1200

SOFT CURE 900 mW/cm²

1000

800

2000 1800 1600 TURBO 2000 mW/cm²

1400

FULL 1200 mW/cm²

1200

SOFT CURE 900 mW/cm²

440

460

480

500

520 (nm)

420

C01-C Light Wavelength

TURBO 2000 mW/cm² FULL 1200 mW/cm² SOFT CURE 900 mW/cm²

800

800 420

1000

LIGHT INTENSITY (mW/cm²)

LIGHT INTENSITY (mW/cm²)

1800

2000

LIGHT INTENSITY (mW/cm²)

EFFECTIVE WAVELENGTH BAND 440 nm - 480 nm

2000

EFFECTIVE EFFECTIVE LOWER UPPER WAVELENGTH WAVELENGTH BAND BAND 390 nm - 430 nm 440 nm - 480 nm

EFFECTIVE WAVELENGTH BAND 440 nm - 480 nm

440

460

480

500

520 (nm)

380

C01-S Light Wavelength

400

420

440

460

480

500

520 (nm)

C01-D Light Wavelength

CURING LIGHT MODE APPLICATIONS TACK

Tack cure, a very short initial curing for temporary processing before final cure. For example, veneer bonding or temporary cement for in�position and easy removal of excess material.

TURBO

Super fast curing for resin and composite under 2 mm thickness. Also recommended for ceramic brackets, veneer bonding etc.

3’ + 3’

3 Seconds Mesial + 3 Seconds Distal for metal brackets resin bonding. (with 1 second blink in between)

6’ + 6’

6 Seconds Mesial + 6 Seconds Distal for metal brackets with bonding resin requiring more curing time, and buccal tubes bonding. (with 1 second blink in between)

FULL

For general applications.

RAMP

With first 0�5 seconds ramping for general application.

SOFT CURE

With first 0�5 seconds ramping for more gentle processing, designed for the patients sensitive to the heat.

C01-C / C01-S / C01-D CURING LIGHT DEPTH OF CURE C01-C (classic) Curing Time

Depth Measurements

ISO 4049 Depth Measurements (-50%)

TURBO

5 seconds

4.2 mm

2.10 mm

FULL

10 seconds

4.3 mm

2.15 mm

RAMP

10 seconds

4.1 mm

2.05 mm

SOFT CURE

15 seconds

4.6 mm

2.30 mm

MODEL

C01-S (super power)

C01-D (dual range) Curing Time

Depth Measurements

ISO 4049 Depth Measurements (-50%)

2.30 mm

4 seconds

4.3 mm

2.15 mm

2.55 mm

10 seconds

4.4 mm

2.20 mm

5.0 mm

2.50 mm

10 seconds

4.2 mm

2.10 mm

4.8 mm

2.40 mm

15 seconds

4.6 mm

2.30 mm

Depth Measurements

ISO 4049 Depth Measurements (-50%)

4 seconds

4.6 mm

10 seconds

5.1 mm

10 seconds 15 seconds

Curing Time

REMARKS: Above data is based on test results using an A2 shade composite. The light tip was placed above and pointed perpendicular to the composite. Tests were done as per ISO 4049 Standard. The samples were measured and the data was divided by two (50% of the total composite depth cured). ISO 4049 Standard requires that the results for class II restorative materials should be at least 1.5 mm for non-opaque shades and 1.0 mm for opaque shades. All resins and composites have different curing times. It is recommended that you should test your resins and composites performance to determine curing times required.

Data is only for reference, always follow the instructions from your resin and composite manufacturers • There are many variables (distance and angle between the tip and composite, area, shade, thickness and type etc.) affecting composite curing times. It is recommend to place and cure only 2 mm for each composite placement. • Using a barrier sleeve for the curing light will reduce 5-10% of curing light intensity. • The light tip should be placed approximately 1-2 mm above the resin or composite and pointed perpendicular to tooth surface. • High intensity lights produce more heat, this is a direct indication of the power of light being emitted. When using the light for more than 10 seconds, do not keep the light head in one position. It is always recommended to use a dental syringe to blow a cold air flow on the area during long periods of curing. This will maintain a lower temperature for the composite and surrounding area, particularly when using rubber dam so as to avoid any rubber dam breakage due to heat build up. • Do not expose soft tissue to curing light for more than 2 seconds or burns may occur.

order hot line - tel: 1-877-226-2288

fax: 1-800-901-6064

3


C02 Curing Lights

C02 LED CURING LIGHTS 90° right angle direct light source head

LOW PROFILE HEAD FOR ACCESSING HARD-TO-REACH AREAS 12 mm

C02 SPECIFICATIONS C02-C (classic)

Model DIRECT LIGHT HEAD

LIGHT GUIDE CAN BE ROTATED 360º

C02-D (dual range)

10 mm ( dia. )

LIGHT WAVELENGTH

440~480 nm

440~480 nm

390~430 nm 440~480 nm

APPLICATION

General

Ortho / General

General / Ortho

MODE

HARDENED GLASS LENS COLLIMATED UNIFORM STRAIGHT LIGHT BEAM

STAINLESS STEEL HEAD FOR DURABILITY

C02-S (super power)

TACK

N/A

2,000 mW/cm² for 1 second±10%

TURBO

1,500 mW/cm² for 5 seconds ±10%

2,500 mW/cm² for 3 seconds±10%

3’ + 3’

N/A

2,000 mW/cm² for 3 + 3 seconds±10%

(with 1 second blink in between)

6’ + 6’

N/A

1,500 mW/cm² for 6 + 6 seconds±10%

(with 1 second blink in between)

FULL

1,200 mW/cm² for 5, 10, 15, 20 seconds±10%

RAMP

1st five seconds from 0�1,200 mW/cm²

SOFT CURE

1st five seconds from 0�900 mW/cm²

next 5, 10, 15, 20 seconds 1,200 mW/cm²±10% next 5, 10, 15, 20, 25 seconds 900 mW/cm²±10%

C02 Complete Set with Built-In Light Intensity Indicator

ON/OFF switch

AUTOMATIC COMPENSATION CIRCUIT FOR CONSTANT POWER OUTPUT

display screen time switch

24 MONTH WARRANTY

mode indicators FULLY COVERED MEMBRANE PANEL FOR EASY CLEANING AND INFECTION CONTROL

SIZE: L255 x Dia.27 (mm) WEIGHT:185 gms

mode switch

charging station

light intensity indicator

063 Protective Hand Light Shield $19.95

C02-C ( Classic ) Curing Light with 10 mm Light Head .............. $299.95 C02-S ( Super Power ) Curing Light with 10 mm Light Head .... $399.95 C02-D ( Dual Range ) Curing Light with 10 mm Light Head ...... $399.95 C02-C-1 ( Classic ) Direct Light Source Head ............................... $59.95 C02-S-1 ( Super Power ) Direct Light Source Head ...................... $99.95 C02-D-1 ( Dual Range ) Direct Light Source Head ....................... $99.95 C01/2-1 Replacement Battery ........................................................ $49.95 125 Light Sleeves ( for C02-C/S/D ) 500 pcs/box .......................... $19.95

For every C02 Curing Light purchased (any model) get one 063 Hand Shield For every two C02 Curing Lights purchased (same model) get one C02 Curing Light (same model) + three 063 Hand Shields

REPLACEABLE BATTERY OPENING

4

sales@premiumplususa.com

www.premiumplususa.com


C02 Curing Lights EFFECTIVE WAVELENGTH BAND 440 nm - 480 nm

EFFECTIVE LOWER EFFECTIVE UPPER WAVELENGTH WAVELENGTH BAND BAND 390 nm - 430 nm 440 nm - 480 nm

2600

2400

2400

2400

2200

2200

2200

2000

2000

2000

1800 1600 1400 1200 1000

TURBO 1500 mW/cm²

1800 1600

FULL 1200 mW/cm²

1400 1200

SOFT CURE 900 mW/cm²

1000

800

LIGHT INTENSITY (mW/cm²)

2600

LIGHT INTENSITY (mW/cm²)

2600

TURBO 2500 mW/cm²

1600 FULL 1200 mW/cm²

SOFT CURE 900 mW/cm²

420

440

460

480

500

520 (nm)

1400 1200 1000

TURBO 2500 mW/cm²

FULL 1200 mW/cm²

SOFT CURE 900 mW/cm²

800

800 420

C02-C Light Wavelength

1800

LIGHT INTENSITY (mW/cm²)

EFFECTIVE WAVELENGTH BAND 440 nm - 480 nm

440

460

480

500

520 (nm)

380

C02-S Light Wavelength

400

420

440

460

480

500

520 (nm)

C02-D Light Wavelength

CURING LIGHT MODE APPLICATIONS TACK

Tack cure, a very short initial curing for temporary processing before final cure. For example, veneer bonding or temporary cement for in�position and easy removal of excess material.

TURBO

Super fast curing for resin and composite under 2 mm thickness. Also recommended for ceramic brackets, veneer bonding etc.

3’ + 3’

3 Seconds Mesial + 3 Seconds Distal for metal brackets resin bonding. (with 1 second blink in between)

6’ + 6’

6 Seconds Mesial + 6 Seconds Distal for metal brackets with bonding resin requiring more curing time, and buccal tubes bonding. (with 1 second blink in between)

FULL

For general applications.

RAMP

With first 0�5 seconds ramping for general application.

SOFT CURE

With first 0�5 seconds ramping for more gentle processing, designed for the patients sensitive to the heat.

C02-C / C02-S / C02-D CURING LIGHT DEPTH OF CURE C02-C (classic) Curing Time

Depth Measurements

ISO 4049 Depth Measurements (-50%)

TURBO

5 seconds

4.4 mm

2.20 mm

FULL

10 seconds

5.1 mm

RAMP

10 seconds

SOFT CURE

15 seconds

MODEL

C02-S (super power)

Depth Measurements

ISO 4049 Depth Measurements (-50%)

C02-D (dual range) Curing Time

Depth Measurements

ISO 4049 Depth Measurements (-50%)

3 seconds

4.6 mm

2.30 mm

3 seconds

4.5 mm

2.25 mm

2.55 mm

10 seconds

5.3 mm

2.65 mm

10 seconds

5.2 mm

2.60 mm

4.8 mm

2.40 mm

10 seconds

5.3 mm

2.65 mm

10 seconds

4.9 mm

2.45 mm

5.0 mm

2.50 mm

15 seconds

5.4 mm

2.70 mm

15 seconds

5.1 mm

2.55 mm

Curing Time

REMARKS: Above data is based on test results using an A2 shade composite. The light tip was placed above and pointed perpendicular to the composite. Tests were done as per ISO 4049 Standard. The samples were measured and the data was divided by two (50% of the total composite depth cured). ISO 4049 Standard requires that the results for class II restorative materials should be at least 1.5 mm for non-opaque shades and 1.0 mm for opaque shades. All resins and composites have different curing times. It is recommended that you should test your resins and composites performance to determine curing times required.

Data is only for reference, always follow the instructions from your resin and composite manufacturers • There are many variables (distance and angle between the tip and composite, area, shade, thickness and type etc.) affecting composite curing times. It is recommend to place and cure only 2 mm for each composite placement. • Using a barrier sleeve for the curing light will reduce 5-10% of curing light intensity. • The light tip should be placed approximately 1-2 mm above the resin or composite and pointed perpendicular to tooth surface. • High intensity lights produce more heat, this is a direct indication of the power of light being emitted. When using the light for more than 10 seconds, do not keep the light head in one position. It is always recommended to use a dental syringe to blow a cold air flow on the area during long periods of curing. This will maintain a lower temperature for the composite and surrounding area, particularly when using rubber dam so as to avoid any rubber dam breakage due to heat build up. • Do not expose soft tissue to curing light for more than 2 seconds or burns may occur.

order hot line - tel: 1-877-226-2288

fax: 1-800-901-6064

5


PIEZO ULTRASONIC SCALERS DTE D7 (SATELEC2 TYPE) PORTABLE SCALER

DTE D5 SCALER (SATELEC2 TYPE) Size:- W71/2” x D61/4” x H31/8”

NO FIXED INSTALLATION

DTE-D5 SCALER HANDPIECE AND TIPS ARE COMPATIBLE WITH SATELEC 2 TYPE SCALERS

ONE YEAR WARRANTY (except Scaler Tips)

Size:- W93/8” x D81/8” x H33/4”

DTE-D5 Piezo Ultrasonic Scaler complete with 6 Tips ED1, GD1, GD2, GD3, GD4, PD1 and Male Quick Connector . $299.50 DTE-D5 LED Piezo Ultrasonic Scaler complete with 6 Tips ED1, GD1, GD2, GD3, GD4, PD1 and Male Quick Connector . $349.50

DETACHABLE HANDPIECE

DTE-D7 Portable Scaler complete with 6 Tips GD1, GD2, GD3, GD4, PD1 and ED1 .... $499.95 DTE-D7 LED Portable Scaler complete with 6 Tips GD1, GD2, GD3, GD4, PD1 and ED1 ... $649.50

• Digitally controlled, automatic frequency tracking • Small, light weight and easy operation • Autoclavable Titanium handpiece with excellent piezo-ceramic vibrations • Frequency: 28kHz ±3kHz

TITANIUM SCALER HANDPIECES

DTE D7 PORTABLE SCALER HANDPIECE AND TIPS ARE COMPATIBLE WITH SATELEC 2 TYPE SCALERS

1 EMS is a registered trademark of Electro Medical System S.A. Switzerland 2 SATELEC is a registered trademark of Satelec/Acteon Group France

TITANIUM SCALER HANDPIECES

for WOODPECKER, EMS1 Type Scalers

for DTE, SATELEC2 Type Scalers

HW-3H (Woodpecker, EMS1 Type) Non-LED Scaler Handpiece .... $159.95

HD-7H (DTE, SATELEC2 Type) Non-LED Scaler Handpiece .... $169.95

Buy 4 get 1

Buy 4 get 1

(same item)

(same item)

HD-7L (DTE, SATELEC2 Type) LED Scaler Handpiece .... $199.95 2 SATELEC is a registered trademark of Satelec/Acteon Group France

HW-5L (Woodpecker, EMS1 Type) LED Scaler Handpiece .... $189.85 1 EMS is a registered trademark of Electro Medical System S.A. Switzerland

SCALING

G1T (WOODPECKER, EMS1, Type) GD1T (DTE, SATELEC2, NSK3 Type) for supragingival calculus and plaque, neck of teeth and hard calculus on the teeth point each $14.95

SCALER TIPS STAINLESS STEEL TITANIUM COATED Non-Sticky, Longer Lasting For WOODPECKER, EMS1 , DTE, SATELEC2, NSK3 Type Scalers PERIO

P1T (WOODPECKER, EMS1, Type) PD1T (DTE, SATELEC2, NSK3 Type) for subgingival and supragingival calculus

1

Comparable with EMS1 Type B

Comparable with EMS1 Type P

G2T (WOODPECKER, EMS , Type) GD2T (DTE, SATELEC2, NSK3 Type) for supragingival heavy calculus

Comparable with EMS1 Type PS

each $15.95

Comparable with EMS1 Type A

G4T (WOODPECKER, EMS1, Type) GD4T (DTE, SATELEC2, NSK3 Type) for supragingival calculus and plaque

Comparable with NSK3 G1 Satelec2 #1

G5T (WOODPECKER, EMS1, Type) GD5T (DTE, SATELEC2, NSK3 Type) for supragingival and neck calculus and plaque

each $15.95

Comparable with NSK3 G4 Satelec2 #10P

C&B

P3T (WOODPECKER, EMS1, Type) PD3T (DTE, SATELEC2, NSK3 Type) for fine scaling and deep perio calculus

P4T (WOODPECKER, EMS1, Type) PD4T (DTE, SATELEC2, NSK3 Type) for subgingival and interdental calculus

G7T (WOODPECKER, EMS1, Type) GD7T (DTE, SATELEC2, NSK3 Type) used to remove dental crown

Buy 4 get 1

(same item)

each $16.95

TORQUE WRENCHES

• Autoclavable • Holds Scaler tip inside • Color: White

TW-1L Torque Wrench (WOODPECKER, EMS1 Type) ... $14.95 TD-1L Torque Wrench (DTE, SATELEC2, NSK3 Type) .... $14.95

Buy 4 get 1

1 EMS is a registered trademark of Electro Medical System S.A. Switzerland 2 SATELEC is a registered trademark of Satelec/Acteon Group France 3 NSK is a registered trademark of Nakanishi Inc. Japan

6

each $21.95

each $21.95

each $21.95

G6T (WOODPECKER, EMS1, Type) GD6T (DTE, SATELEC2, NSK3 Type) for supragingival heavy calculus

each $21.95

E2T (WOODPECKER, EMS1, Type) ED2T (DTE, SATELEC2, NSK3 Type) (95°Angle Holder) for NITI K-Files, usually used for anterior root canal cleaning, sterilizing and debris removal

each $21.95

each $16.95

Comparable with EMS1 Type C NSK3 G2 Satelec2 #2

E1T (WOODPECKER, EMS1, Type) ED1T (DTE, SATELEC2, NSK3 Type) (120°Angle Holder) for NITI K-Files, usually used for anterior root canal cleaning, sterilizing and debris removal

each $17.95

each $14.95

G3T (WOODPECKER, EMS1, Type) GD3T (DTE, SATELEC2, NSK3 Type) for subgingival, supragingival and interdental calculus and plaque

ENDO

sales@premiumplususa.com

Comparable with EMS1 Type H NSK3 E6 Satelec2 #S07

E3T (WOODPECKER, EMS1, Type) ED3T (DTE, SATELEC2, NSK3 Type) After root canal cleaning, using the mechanism and heat energy of ultrasonic vibration to intenerate the filling lateral condensation, to make sure the top of the scaler tip touch the lateral condensation each $31.95

1 EMS is a registered trademark of Electro Medical System S.A. Switzerland 2 SATELEC is a registered trademark of Satelec/Acteon Group France 3 NSK is a registered trademark of Nakanishi Inc. Japan

SCALER HANDPIECE CABLES Scaler Handpiece Cable (WOODPECKER, EMS1 Type) ... $49.95 Scaler Handpiece Cable (DTE, SATELEC2 Type) .............. $49.95

Buy 4 get 1 www.premiumplususa.com


SCALER TIPS STAINLESS STEEL SCALING

PERIO

G1 (WOODPECKER, EMS1 Type) GD1 (DTE, SATELEC2, NSK3 Type) for supragingival calculus and plaque on neck of teeth and hard calculus on the teeth point

P1 (WOODPECKER, EMS1 Type) PD1 (DTE, SATELEC2, NSK3 Type) for subgingival and supragingival calculus

G2 (WOODPECKER, EMS Type) GD2 (DTE, SATELEC2, NSK3 Type) for supragingival heavy calculus

Comparable with EMS1 Type PS

each $12.95

Comparable with NSK3 G4 Satelec2 #10P

D Coiamo ati nd ng m 7m

G4 (WOODPECKER, EMS1 Type) GD4 (DTE, SATELEC2, NSK3 Type) for supragingival calculus and plaque

Comparable with EMS1 Type DPL3

each $19.95

P3D (WOODPECKER, EMS1 Type) PD3D (DTE, SATELEC2, NSK3 Type) Diamond tip for smoothing overhangs and expanding root furcations

G7

New!

D Co iam at ond ing

New!

P2RD (WOODPECKER, EMS1 Type) PD2RD (DTE, SATELEC2, NSK3 Type) Right-angled, diamond-coated, to remove calculus from very narrow inter -root spaces and furcation

each $29.95 P2RD

G7 (WOODPECKER, EMS1 Type) GD7 (DTE, SATELEC2, NSK3 Type) used to remove dental crown

each $29.95

each $19.95

G6 (WOODPECKER, EMS Type) GD6 (DTE, SATELEC2, NSK3 Type) for supragingival heavy calculus each $14.95

ENDO

E1 (WOODPECKER, EMS1 Type) ED1 (DTE, SATELEC2, NSK3 Type) (120° Angle Holder) for NITI K-Files, usually used for premolar root canal cleaning, sterilizing and debris removal

E3 (WOODPECKER, EMS1 Type) ED3 (DTE, SATELEC2, NSK3 Type) After root canal cleaning, using the mechanism and heat energy of ultrasonic vibration to intenerate the filling lateral condensation, to make sure the top of the scaler tip touch the lateral condensation E3D (WOODPECKER, EMS1 Type) ED3D (DTE, SATELEC2, NSK3 Type) used to remove the calcification and bad filling material of pulp cavity, overhang pulp chamber

12

Comparable with NSK3 E7D Satelec2 #ET18D

D Coiamo ati nd ng

each $29.95

m

Comparable with Satelec2 #PM4

each $29.95

E4

New!

E2 (WOODPECKER, EMS Type) ED2 (DTE, SATELEC2, NSK3 Type) (95° Angle Holder) for: NITI K-Files, usually used for distomolar root canal cleaning, sterilizing and debris removal

E4D

New!

E8

New!

E5 (WOODPECKER, EMS1 Type) ED5 (DTE, SATELEC2, NSK3 Type) To remove calculus, temporary cements and broken instruments in the coronal third

New!

E5D (WOODPECKER, EMS1 Type) ED5D (DTE, SATELEC2, NSK3 Type) Diamond-coated, with enhanced cutting and abrasive power laterally. Specially useful for removing very hard materials on the canal wall

E5

New!

E8 (WOODPECKER, EMS Type) ED8 (DTE, SATELEC2, NSK3 Type) Bur holder holds 1.6mm FG burs, used to expand root canal and teeth preparation

each $29.95

each $29.95 E9

New!

E9 (WOODPECKER, EMS1 Type) ED9 (DTE, SATELEC2, NSK3 Type) Bur holder, hold 1.6mm FG burs, used to expand root canal and teeth preparation

E5D

each $29.95

each $29.95

CAVITY PREPARATION SB1 (WOODPECKER, EMS1, Type) SBD1 (DTE, SATELEC2, NSK3 Type) Ball diamond tip. To remove the carious teeth without damaging the adjacent teeth each $29.95

SBL (WOODPECKER, EMS1, Type) SBDL (DTE, SATELEC2, NSK3 Type) Half ball diamond tip. Set 45° to the left, to remove the carious teeth without damaging the adjacent teeth each $29.95

SB2 (WOODPECKER, EMS1, Type) SBD2 (DTE, SATELEC2, NSK3 Type) Upper hemispherical ball sprayed finishing with diamond grain, to remove the carious teeth without damaging the adjacent teeth each $29.95

SB3 (WOODPECKER, EMS1, Type) SBD3 (DTE, SATELEC2, NSK3 Type) Lower hemispherical ball sprayed finishing with diamond grain, to remove the carious teeth without damaging the adjacent teeth

SBR (WOODPECKER, EMS1, Type) SBDR (DTE, SATELEC2, NSK3 Type) Half ball diamond tip. Set 45° to the right, to remove the carious teeth without damaging the adjacent teeth each $29.95

Buy 4 get 1

(same item)

E4D (WOODPECKER, EMS1 Type) ED4D (DTE, SATELEC2, NSK3 Type) Diamond-coated, for retreatments of extremely hard materials each $29.95

each $19.95

1

E4 (WOODPECKER, EMS1 Type) ED4 (DTE, SATELEC2, NSK3 Type) To remove obstructions and broken instruments in the mid-upper thirds of large and straight canals each $29.95

1

1

P4D (WOODPECKER, EMS Type) PD4D (DTE, SATELEC2, NSK3 Type) can replace the traditional G reamer, used for preparing good endo jaws

ENDO

each $19.95

each $19.95

m

New!

P2LD (WOODPECKER, EMS1 Type) PD2LD (DTE, SATELEC2, NSK3 Type) Left-angled, diamond-coated, to remove calculus from very narrow inter -root spaces and furcation

P2LD

for supragingival and interdental calculus

C&B

each $14.95

Comparable with EMS1 Type H NSK3 E6 Satelec2 #S07

m

Right-angled, to remove calculus from very narrow inter-root spaces and furcation each $29.95

each $29.95

G5 (WOODPECKER, EMS1 Type) GD5 (DTE, SATELEC2, NSK3 Type) for supragingival and neck calculus and plaque

ENDO

6m

New!

for fine scaling and deep perio calculus

1

Comparable with EMS1 Type C NSK3 G2 Satelec2 #2

each $29.95

P2R (WOODPECKER, EMS1 Type) PD2R (DTE, SATELEC2, NSK3 Type)

P2R

P4 (WOODPECKER, EMS1 Type) PD4 (DTE, SATELEC2, NSK3 Type)

G3 (WOODPECKER, EMS1 Type) GD3 (DTE, SATELEC2, NSK3 Type) for supragingival, subgingival and interdental calculus and plaque

each $13.95

Comparable with NSK3 G1 Satelec2 #1

New!

each $19.95

each $13.95

Comparable with EMS1 Type A

P2L (WOODPECKER, EMS1 Type) PD2L (DTE, SATELEC2, NSK3 Type) Left-angled, to remove calculus from very narrow inter-root spaces and furcation

P2L

P3 (WOODPECKER, EMS1 Type) PD3 (DTE, SATELEC2, NSK3 Type)

1

Comparable with EMS1 Type P

PERIO

each $15.95

each $12.95

Comparable with EMS1 Type B

FOR WOODPECKER, EMS1 , DTE, SATELEC2, NSK3 Type Scalers

Advantages of cavity preparation by ultrasonic scaling tips:• Patients feel much less vibration • Suitable for micro-cavity preparation, offering better bonding power • Suitable for drilling-avoid preparations without the unnecessary removal of the surrounding tooth structure • Low noise level, best for children treating • Remove caries effectively • Better protection of soft tissue

1 EMS is a registered trademark of Electro Medical System S.A. Switzerland 2 SATELEC is a registered trademark of Satelec/Acteon Group France 3 NSK is a registered trademark of Nakanishi Inc. Japan

each $29.95

SCALER ACCESSORIES ENDO WRENCH

AUTOCLAVABLE TIP HOLDER No.1

MALE QUICK DISCONNECTOR

AUTOCLAVABLE TIP HOLDER No.2

Buy 4 get 1 each $9.95

each $9.95

each $12.95

order hot line - tel: 1-877-226-2288

each $19.95

fax: 1-800-901-6064

(same item)

7


DOCTOR AND ASSISTANT STOOLS

PATIENT CHAIR CUSHIONS

B

MEDIUM BLUE

DUSTY JADE GREEN

A

• Universal fitting • Soft vinyl cover with memory foam • Ultimate in patient comfort • Colors available: Blue or Light Beige

A

• Ultra stable base • Adjustable for right or left handed operator • Standard colors available: Medium Blue, Dark Blue, Dusty Jade Green and Black

A. 818 Headrest Cushion ............ $34.95 B. 819 Child Seat Cushion .......... $79.95 C. 820 Backrest/Knee Support .. $34.95

B DARK BLUE

A. Doctor Stool ......... $279.95 B. Assistant Stool .... $299.95

BONART ULTRASONIC SCALER AND INSERTS • Magnetostrictive system • Powerful easy to use • Economically price

BLACK

Buy 4 get 1

P-10 STRAIGHT ANGLE external water flow

P-10 Universal Insert 25K ... $49.55 P-10 Universal Insert 30K ... $49.55

• Cut COAG 1 & COAG 2 mode with 10 level power cutting • User friendly control panel • Minimal scar tissue formation • Effective and reliable • Work frequency: 1.3 - 1.7 MHz ± 5% • Max. out power: 50W (@400 ohm load) • Size: L9” x W9” x H3¼” E1 Electrosurgery Unit with 7 Tips ... $475.00 Electrosurgery Tips ............................... $19.95 Induction Plate ....................................... $99.95

LED.C CURING LIGHT CORDLESS (5 WATTS) • Four modes of working time:- 5, 10, 15, 20 seconds • Three work modes:- Full, Ramping, Pulse • A full charge of battery can be used more than 200 times when set at 10 second working time mode • Autoclavable Light Guide 8 mm • Light weight:- only 120gms • Attractive slim design • Sizes:- L10” x dia.13/8” • Blue light, wave length 420-480mm • Light output: 850 - 1000 mW/cm2 • Replaceable battery LED. C Curing Light .............. $245.00 Light Guide 8mm .................... $39.95 Replacment Battery .............. $49.95

order hot line - tel: 1-877-226-2288

P-100 SLIM external water flow

P-100 Slim Insert 25K ...... $49.95 P-100 Slim Insert 30K ...... $49.95

FS SLIM internal water flow IF 50 Streamline Insert 25K ...... $49.55 IF 50 Streamline Insert 30K ...... $49.55

8

(same item)

IF50 STREAMLINE #10 internal water flow

Art-M3II Scaler Unit 25K or 30K Complete with 1xP-10 and 1xIF 50 Inserts ... $499.95

BONART E1 ELECTROSURGERY UNIT

C

FS Slim Insert 25K ...... $49.95 FS Slim Insert 30K ...... $49.95

ACRYLIC PROTECTIVE LIGHT HAND SHIELD • Hand held • Protection for both dentist and assistant • Cold disinfection only • Size: 5” x 10” x 1/8” 063 Protective Light Hand Shield ... $19.95

Buy 4 get 1

C10 LED & HALOGEN CURING LIGHT METER C10 Light Meter $59.95

• Simple, compact design for easy use • Measure intensity up to 2500 mW/cm² • Size: 4½” x 2½” x 1”

Buy 4 get 1 sales@premiumplususa.com

www.premiumplususa.com

Profile for Premium Plus Dental Supplies Inc

Premium Plus Dental Supplies Equipment Catalogue 2019  

Premium Plus Dental Supplies Equipment Catalogue 2019  

Advertisement