CAUTION - READ THIS FIRST! IT IS CRITICAL THAT CUSTOMERS INSPECT THE SHIPMENT IN THE PRESENCE OF THE FREIGHT DELIVERY DRIVER. IF YOU FAIL TO INSPECT THE SHIPMENT, THE CARRIER AND POLYTRONIX, INC. ARE NOT RESPONSIBLE FOR DAMAGES.
INSPECT EACH PANEL OF GLASS FOR DAMAGES. CHECK PACKING LIST FOR QUANTITIES OF GLASS PANELS AND POWER SUPPLIES. POLYVISION PANELS MUST BE STORED WHERE THE RELATIVE HUMIDITY IS LESS THAN 80% TO PREVENT GLASS FROM STAINING* *Refer to Binder for additional installation cautions and information
USE ONLY NON-ACETIC SEALANTS
GE SSG4000 Rhodorsi 3B (Rhone-Poulenc)
Dow Corning 399, 795, 991, 995, 1199 Schnee-Morehead SM5731
THIS GLASS MUST BE TURNED OFF A MINIMUM OF 4 HOURS EVERY 24 HOUR PERIOD
Clear/ON HIGH HAZE
Clear/ON LOW HAZE
Timers are highly recommended
Diagram below shows wiring (with using the timer or without timer)
PDLC POWER SUPPLY
Powers up to WHITE 60 sf. of Glass L N 120/277VAC
TORK速 E101B 24-HOUR DIGITAL TIME SWITCH SHRINK TUBE
SOLDER JOINT All connections must be soldered and sealed with shrink tubing. Wires can be extended with 18 AWG wires.
Switchable Privacy Glass
3-YEAR LIMITED WARRANTY Polytronix, Inc. provides a 3-year limited warranty of the PolyvisionTM panel against electrical failure and/or delamination in material or product failure because of workmanship. Polytronix. Inc. is not liable for any damages or costs associated with improper storage, installation, hardware or usage of the PolyvisionTM panel. Polytronix, Inc., in its discretion, may select either to replace the panels at no cost or refund all or a prorated portion of the customer cost based on the useful life of the PolyvisionTM panel. The purchaser agrees to assume all financial responsibility for removal of old panels and installation of new ones. Polytronix, Inc. is not liable for any labor costs associated with removal or installation of panels. These remedies are the exclusive remedies available under this warranty. Polytronix, Inc. is not liable for any consequential, liquidated, exemplary, or other damages that might result from any product failure of the PolyvisionTM panel.
For warranty to be valid, panels must be in the OFF state (opaque) for a minimum of 4 hours every 24 hours. Switching ON and OFF daily is encouraged to ensure that the panels remain functional.
Polytronix, Inc. -
PH: 972-238-7045 â€˘ FAX: 214-466-1280 www.polytronixglass.com
Polytronix Sales Order # Keep a copy of this warranty for your records
Customer Acknowledgement Signature: By signing this warranty you acknowledge that you have read and understand its contents.
DOC DATE: 12/2013