__MAIN_TEXT__
feature-image

Page 1

CATALOGUE OF APPLICATIONS

TECHNICAL FILMS 07/2020 | Rev. 01

@polofilms


CATA LO G U E O F T EC H N I CA L F I L M S

TSY.L82

Polo Seal

Transparent

Heat-sealable at low temperatures

TSY.L82.BIO Polo Seal

Transparent

Surface treatment for printing and/or lamination Biodegradable

TPY.PSL Polo Plain TBP.PSL Polo Opaque TWO.PSL Polo Opaque

Transparent Self-adhesive labels Opaque White Self-adhesive labels White Self-adhesive labels

TMA.PLN Polo Matte Polo Plain TPY

Matte Transparent

Non-Sealable Non-Sealable

TFW Transparent TFW.HSK Transparent

Polo Seal Polo Seal

TFW.L82 Transparent TSW Transparent

Polo Seal Polo Seal

Medium Shrinkage Medium Shrinkage and Heat-sealable at low temperatures Low SIT (82º C) Low shrinkage


CATA LO G U E O F TEC H N I CA L F I L M S

TSY.L82 Transparent BOPP Film Heat-sealable at low temperatures Surface treatment for printing and/or lamination

MAIN CHARACTERISTICS Heat-sealable on both surfaces, starting from 82° C on the untreated surface; Internal and external surface treatment; Excellent optical properties (gloss and transparency); Excellent performance in horizontal and vertical filling machines; Optimal hermetic sealing.

MOST COMMON APPLICATIONS Flexible packaging for foods: biscuits, wafers, and cluster packaging; Flexible packaging for non-foods: A4 paper reams; Provides higher productivity in filling or packing processes due to a shorter sealing time; Designed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


TPY.PSL Transparent BOPP Film Non heat-sealable Surface treatment for labels and stickers

MAIN CHARACTERISTICS Non heat-sealable film; Internal and/or external surface treatment; Excellent optical properties (gloss and transparency); Optimal performance in flexographic printers and rotogravure printing.

MOST COMMON APPLICATIONS Self-adhesive labels and tags (Pressure-Sensitive Labeling).

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


CATA LO G U E O F TEC H N I CA L F I L M S

TBP.PSL Opaque White BOPP Film Surface treatment for printing and stickering Pressure-Sensitive Labeling Application

MAIN CHARACTERISTICS Heat-sealable starting from 112° C on the glossy surface; Internal and/or external surface treatment; A glossy surface, and a matte surface; High stiffness and low stretch; Cavitated film with high opacity; Optimal performance in flexographic printers, and in rotogravure, digital, ultraviolet and thermal transfer printing.

MOST COMMON APPLICATIONS Self-adhesive labels and tags (Pressure-Sensitive Labeling); Magazine Labels (WAL Cut & Stack); Decorative applications in general.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


TWO.PSL Opaque White BOPP Film. Surface treatment. Pressure-Sensitive Labeling Application.

MAIN CHARACTERISTICS Heat-sealable starting from 112° C on the glossy surface; Internal and external surface treatment; A high-gloss white surface, and a matte surface; High stiffness and low stretch; Cavitated film with high opacity; Optimal performance in flexographic printers, and in rotogravure, digital, ultraviolet and thermal transfer printing.

MOST COMMON APPLICATIONS Self-adhesive labels and tags (Pressure-Sensitive Labeling) ; Magazine Labels (WAL Cut & Stack); Decorative applications in general.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


CATA LO G U E O F TEC H N I CA L F I L M S

TMA.PLN Matte BOPP Film Non heat-sealable Surface treatment for printing and/or lamination

MAIN CHARACTERISTICS Non heat-sealable film; Internal and external surface treatment; Matte surface providing satin effect and soft touch; Excellent performance in horizontal and vertical filling machines.

MOST COMMON APPLICATIONS Flexible packaging for foods: biscuits, snacks, chocolates, cereal bars and doughs; Flexible packaging for non-foods: soaps, pet food, paperboard lamination and graphics applications in general; Designed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


TPY Transparent BOPP Film. Non heat-sealable. Surface treatment for printing and/or lamination.

MAIN CHARACTERISTICS Non heat-sealable film; Internal and/or external surface treatment; Excellent optical properties (gloss and transparency); Optimal performance in horizontal or vertical filling machines; Medium thermal resistance.

MOST COMMON APPLICATIONS Flexible packaging for foods: doughs, coffees, chocolate products, dried soups, nutritional powders; Flexible packaging for non-foods: pet food; paperboard lamination and graphics applications in general; Continuous labels (WAL Roll Fed), laminated or monolayer options, and Magazine Labels (WAL Cut & Stack); Designed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling processes.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


CATA LO G U E O F TEC H N I CA L F I L M S

TFW Transparent BOPP Film Heat-sealable Medium shrinkage

MAIN CHARACTERISTICS Heat-sealable starting from 105° C on both surfaces; No surface treatment; Excellent optical properties (gloss and transparency); Optimal performance in packing machines.

MOST COMMON APPLICATIONS Overwrapping for foods: candy/chocolate boxes, biscuits and foods in general; Overwrapping for non-foods: soap clusters, toothpastes; Overwrapping in general.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


TFW.HSK Transparent BOPP Film Heat-sealable High shrinkage

MAIN CHARACTERISTICS Heat-sealable starting from 105° C on both surfaces; No surface treatment; Excellent optical properties (gloss and transparency); Excellent performance in packing machines.

MOST COMMON APPLICATIONS Overwrapping for foods: candy/chocolate boxes, biscuits and foods in general; Overwrapping for non-foods: soap clusters, toothpastes; Overwrapping in general.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


CATA LO G U E O F TEC H N I CA L F I L M S

TFW.L82 Transparent BOPP Film Heat-sealable at low temperatures Medium shrinkage

MAIN CHARACTERISTICS Heat-sealable on both surfaces, starting from 82° C on the internal surface of the reel; No surface treatment; Excellent optical properties (gloss and transparency); Excellent performance in high-speed packing machines.

MOST COMMON APPLICATIONS Overwrapping and clusters of packets for the cigarette (tobacco) industry.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


TSW Transparent BOPP Film. Heat-sealable. Surface treatment on a surface for Low Shrinkage printing for overwrapping.

MAIN CHARACTERISTICS Heat-sealable on both surfaces, starting from 105° C on the untreated surface; Internal and external surface treatment; Good optical properties (gloss and transparency); Optimal performance in packing machines.

MOST COMMON APPLICATIONS Overwrapping for foods: candy/chocolate boxes; biscuits and foods in general; Overwrapping for non-foods: soap clusters, toothpastes; overwrapping in general.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability. It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.


W W W. P O LO F I L M S .CO M . B R

@polofilms


TSY.L82.BIO Transparent BOPP film Heat-sealable at low initial temperature Surface treatment for printing and/or lamination Biodegradable

MAIN CHARACTERISTICS Both sides heat-sealable, non-treated side from 82°C; Surface treatment on inner or outer layer; Excellent optical properties (gloss and transparency); Excellent performance in horizontal form-fill-seal and wrap-around packing machines; BOPP specially designed to biodegrade in environments anaerobic.

MOST COMMON APPLICATIONS Flexible packaging for food: cookies, wafer grouping packaging; Non-food flexible packaging: A4 sheet reams; Provides increased productivity for filling or packing processes owing to decreased sealing time; Developed for HFFS - Horizontal Form Fill Seal and VFFS - Vertical Form Fill Seal filling or high-speed packing processes.

STORAGE CONDITIONS All products are stored in dry, protected and clean environments, and are shipped under the same conditions in any mean of transportation. It is recommended that storage and transportation are carried out at a temperature of around 30° C and relative humidity of 60%. If the temperature is not at the recommended level, the following problems might occur: - Surface treatment level reduction which, at a later stage, might hinder printing and/or lamination; - Film transparency reduction; - Excessive CoF reduction, which might hinder processing and machinability It is recommended that BOPP films are kept at operating room temperature for 24 hours before use.

Profile for Polo Films

Catálogo Aplicações_Filmes Técnicos_INGLÊS  

Catálogo Aplicações_Filmes Técnicos_INGLÊS  

Profile for polofilms

Recommendations could not be loaded

Recommendations could not be loaded

Recommendations could not be loaded

Recommendations could not be loaded