Page 1

PRODUCT CATALOGUE

AFL ATHLETICS BADMINTON BASKETBALL CRICKET GOLF HOCKEY NETBALL RUGBY SOCCER TENNIS VOLLEYBALL

TM

www.playhardsports.com.au


SPORTS HALL

2

INDOOR PRODUCTS

BASKETBALL: NETBALL: VOLLEYBALL: Play Hard Sports has a complete range of sporting products to complement your sports hall. These pages show at a glance, all the product codes you need to outfit a hall. See full product details on the following Indoor Products pages.

8 BADMINTON

BASKETBALL MAIN COURT

1

SIDE COURT There are three mounting styles for side court practice units, all available with 1.8 m x 1.05m boards or 1.2 x 0.9 m boards, maximum extension 2.2m, (with B1810p Polyboard, and R11b ring).

SR50 - Roof retractable (with B1810p Polyboard backboard, R11b ring and SH240 key operated 240v winch). or SW40b - Wall mounted side swing (up to 4.2m extension) Options: SHF - Height adjusting frame SH240r - radio remote control winch B1810a - 15mm acrylic backboard B1810a2 - 20mm acrylic backboard B1810g - Glass backboard BP05 - Backboard padding Ozring - Spring tension ring

2

SW40a - Cable free mounting.

3

SW40c - Used where there are building obstructions above 3.0m high

4

SW40d - Used where there are building obstructions below 3.0m Options: SHF - Height adjusting frame B1810a or B1290a - Acrylic backboard B1810g or B1290g - Glass backboard BP03 - Backboard padding Ozring - Spring tension ring

MB60 - Posts to suit floor sleeves Floor types EI60 - sleeves for concrete or sports surfaces. EI60 + EI60c - sleeves and access covers for timber over concrete floors. EI60f - sleeves for suspended timber floors. MB45 - Posts with a weighted base that requires no ground anchorage. MB40 - Posts with a “T” base which bolts to EIW/M10 disc recessed into the floor. Generally used on existing floors where core drilling for sleeves is impractical. MBN12 - Net 6020mm long x 760mm deep, 20mm square mesh.

EXTRAS

5

BMS - Electronic score board BMC - Shot clocks

6

BPB24 - Players bench

7

BSB15 - Scorers bench

3 11 6 2

9 6

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


PRODUCT GUIDE

3

INDOOR PRODUCTS

BADMINTON: FUTSAL: HOCKEY

9 NETBALL

10 6 VOLLEYBALL

11 6 DIVIDER CURTAINS

NS60i - Indoor senior netball poles 60mm dia. with rings and nets.

VS60/22 - Base Package consisting of: V60i poles with four fixed height positions. VN22 net with rope tie. VP45f wrap around flat padding.

DC/VL - Vertical lift curtain suspended from roof beams and raised by SH240 or SH240r electric winch. The curtain can consist of a vinyl bottom section and 44mm square mesh netting above or netting only.

NS60ti - Telescopic 60mm dia. poles for junior and senior heights at 3050mm and 2400mm. Suits sleeve: EI60 - sleeves for concrete or sports surfaces. EI60 + EI60c - sleeves and access covers for timber over concrete floors. EI60f - sleeves for suspended timber floors. NSP60i - Indoor senior netball poles on a portable weighted base, no floor anchorage required. NSP60t - Telescopic height adjustable poles on a portable weighted base, no floor anchorage required. Options: NP30 - pole padding 3.0m high x 160 mm dia. NP24 - pole padding 2.4m high x 160 mm dia. NP18 - pole padding 1.8 m high x 160 mm dia.

VST60/22 - Same package as above but the pole is mounted to a “T� base which bolts to EIW/M10 floor plate (for floors where core drilling is impractical).

DC/SD - Hand side draw curtain suspended from a tensioned cable. The curtain can consist of a vinyl bottom section and 44mm square mesh netting above or netting only. Curtain can be drawn to one side or split and drawn to both sides.

VS65/30 - Standard Package consisting of: V65si 65mm poles with sliding height adjustment and tensioner. VN30 90 ply net with cable support. VP45f wrap around flat padding.

CP - Padding custom made to fit hall columns.

VS65/32 - Competition package consisting of: V65si 65mm poles with sliding height adjustment and tensioner. VN32 90 ply net with cable support, side tension dowels and VN/a antennae. VP45f wrap around flat padding.

FUTSAL (not shown) F32 - Multipurpose goal 3.0m x 2.0m x 1.0m with side folding panels, supplied with 100mm square mesh net.

V60i and V65si suit sleeves: EI60 - sleeves for concrete or sports surfaces. EI60 + EI60c - sleeves and access covers for timber over concrete floors. EI60f - sleeves for suspended timber floors.

HOCKEY (not shown) H32 - Multipurpose goal 3.0m x 2.0m x 1.0m with side folding panels, supplied with 44mm square mesh net. H32b goal with timber boards is also available.

VC25 - Umpire stand with platform. Option: VP25 - Wrap around stand padding.

5 20:00

24

4 36

3 57

4 1

10 6

7 6

8 6

6

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


4

INDOOR PRODUCTS

- BADMINTON -

Products are manufactured to comply with Badminton World Federation rules and are designed for ease of use and longevity. The type of playing surface will determine which of the three models of badminton posts best suits your needs. MB45 post model has a weighted base and requires no floor anchors. Model MB40 locks into a plate which is screwed into timber floors while model MB60 is designed to locate into sockets set into a concrete floor. Use the selection chart to choose a post model and appropriate floor anchor.

FLOOR TYPE ANY CONCRETE WITH PAINTED OR SPORTS SURFACE FLOATING TIMBER OVER CONCRETE SUSPENDED TIMBER

POST SELECTION CHART MODEL TYPE FLOOR ANCHOR MB45 WEIGHTED BASE NONE MB60 STRAIGHT POST EI60 GROUND SLEEVE MB60 STRAIGHT POST EI60 GROUND SLEEVE + EI60c ACCESS PLATE MB40 "T" BASE EIW/M10 FLOOR PLATE MB40 "T" BASE EI60f FLANGED SLEEVE + EIW60s SUPPORT PIPE

NET MBN12 MBN12 MBN12 MBN12 MBN12

All badminton posts feature our Waverail net tie system.

Waverail net tie

MB60

MB45

MB40

The 60mm round posts fit into sleeves embedded into the playing surface. The net cord sits in a groove in the post cap while the net sides tie off to the Waverail on the side of the post. Fits into EI60 floor sleeves in concrete floors or EI60f flanged sleeves in timber floors. See page 14 for sleeve details.

These 40mm square posts are free standing and require no ground work. Supplied with Waverail net ties and cleat rope ties. The bases have 30kg counter weights, adjustable rubber feet and wheels for easy movement.

The “T” base posts are used when the floor is too shallow or it is impractical to use ground sleeves. The base is secured to EIW/M10 floor plates recessed into timber floors flush to the surface and centred 360mm outside the court sideline. See below.

MBN12 Polyethylene net with 20mm square mesh, 6020mm long and 760mm deep. The net fits against the post which sits flush to the inside edge of the court sideline.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


5

- BASKETBALL -

INDOOR PRODUCTS

Play Hard Sports has three different types of indoor basketball equipment: ROOF MOUNTED WALL MOUNTED PORTABLE

Roof mounted basketball units can be forward or rear retracting and this is dependant on the position of roof rafters in relation to the court position and roof obstacles that may exist. The basketball unit is separate from the roof support structure. Mounting points need to be installed during building construction or added to existing buildings before the unit can be hung. Play Hard Sports can provide the location points for new buildings or we can design a support system for existing buildings.

WINCHES SH41d MANUAL WITH DRIVER SH240 ELECTRIC KEY OPERATE SH240r REMOTE CONTROL

SR50 ROOF RETRACTABLE OPTIONS BOARDS FRAMES RINGS B1810p POLYBOARD B1810 FIXED HT. R11b PREMIUM FIXED B1810a ACRYLIC SHF ADJUSTABLE OZRING SPRING B1810g GLASS

SR50 Roof Mounted Retractable The design and position of the units is specific for each building. For new buildings Play Hard Sports (PHS) can advise where mounting points need to be installed. For existing buildings PHS can design and install support beams to fit the structure. The basketball unit consists of a backboard, backboard frame, extension arms, cable supports, winch, ring, net and motion limit switch.

PADDING BP05

The standard unit is supplied with:

* White Polyboard backboard 20mm thick, sealed against the backboard frame to reduce ball impact noise. * R11b fixed ring with wrap around brace and Waverail net tie. * Limit switch with electrically operated SH240 winch will cut power when the unit has reached maximum height.

Options:

* SH240r winch with radio remote and hand controller. * SH41d manual winch with electric drill driver * B1810a2 20 mm acrylic backboard or B1810g 10 mm tempered glass board. * Ozring spring tension ring. * SHF height adjusting frame. * BP05 backboard padding

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


6

- BASKETBALL -

INDOOR PRODUCTS

Play Hard Sports has three different types of indoor basketball equipment: ROOF MOUNTED WALL MOUNTED PORTABLE

SW40 UNITS HAVE:

FULL SIZE BACKBOARDS FOUR MOUNTING METHODS OPTIONS BOARDS FRAMES RINGS B1810p2 POLYBOARD B1810 FIXED HT. R11b FIXED B1810a ACRYLIC SHF18 ADJUSTABLE OZRING SPRING B1810g GLASS

WALL MOUNTED SW30 UNITS HAVE:

1.2M X 0.9M PRACTICE BOARDS THREE MOUNTING METHODS OPTIONS PADDING BOARDS FRAMES RINGS BP05 B1290p POLYBOARD B1290 FIXED HT. R21a FIXED B1290a ACRYLIC SHF12 ADJUSTABLE R11b FIXED B1290g GLASS OZRING SPRING

Wall mounted units

There are four mounting methods for SW40 and three for SW30 to suit different building conditions. Each type can be supplied as a fixed or side swing design. SW40 are supplied with B1810p2 20mm polyboards and R11b fixed rings as standard. Sw30 are supplied with B1290p 13mm polyboards and R21a rings as standard. The table above shows the options available: All styles consist of the extension arms, backboard frame, backboard, ring and cables where applicable. Not included are additional beams that may be required to provide fixing points. Side swing models use a telescopic locking arm to lock the unit in the playing position. Adjustment can be made at ground level with the hand tool provided.

SW40b

Cable suspended version of SW40a for main court use, outreaches up to 5.0m (not available in SW30 size)

SW40a

For main court up to 3.2 m or side court, 1800 x 1050 mm board size.

SW30a

For side court practice up to 2.2 m, 1290 x 900 mm board size. Used when there are no building obstructions.

SW40c and SW30c Used in places where mounting height restriction only allow fixing points up to 3.0m above the floor, for example where windows or ledges do not allow for the use of both horizontal extension arms.

SW40d and SW30d Used in places where the mounting height restriction only allows fixing points above 3.0m from the floor, for example entry ways.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


7

- BASKETBALL -

INDOOR PRODUCTS

PORTABLE

SP250 Indoor portable practice unit.

This indoor portable basketball unit can be wheeled into location and operated with ease by one person. From the stored position (3) the backboard and arm assembly swings upright. The backboard and ring are now ready for height adjustment. A hand crank at the rear raises the board and ring up to the full playing height of 3050 mm. Frame to face of backboard distance: Height at 3050mm = 1200 mm 2600mm = 1300 mm 2200mm = 1200 mm The 210 litre base has a hinged lid and houses the counter weight, min 120kg (not supplied). The base will hold sand, bricks, pavers or 20L collapsable water containers. Unit weight without ballast is 110kg. The dimensions in the stored position (3): 900w x 1500d x 2000h. Supplied with B1290p Polyboard backboard, R21a ring and BNW6 net. Also supplied with a 50mm thick padded front panel 1600 x 450mm, (not shown, see page 28). Optional: SP/WC collapsable water containers.

3

1

4

2

TY

N RA

EY

R EA

FIV

R WA

R21a

Standard fixed ring with 16 mm thick rim, 14 mm round support arms, 5 mm thick mounting plate. With the Waverail net tie system the net will always be fixed in place. 5 year warranty.

D ITE

LIM

R11b

Top class ring indoor and outdoor use. Has a 300 kg load capacity and will stand up to harsh treatment. Lifetime guarantee of trouble free use. The wrap around brace provides better visual target for shooting, 16 mm high tensile rim, 5 mm mounting plate. With the Waverail net tie system, nets will never get caught up.

Waverail

EA

NY

TE

AR RW

Y

NT

RA

IM

ET

LIF

Y

NT

RA

AR EW

Ozring

Competition spring ring The unique leaf spring is maintenance free and will not sag over time. This ring is firm but has an ideal soft touch which shooters love. The wrap around brace provides better visual target for shooting. With the Waverail net tie system, nets will never get caught up. 10 year warranty.

TM

(patent pending) is the latest development in basketball net tie methods. With conventional ring net hooks, nets frequently tangle on the hooks, hooks often break off and players get cut fingers from net hooks when slam dunking. Advantages of Waverail # the net will never get caught up. # the wave shape rail will never break off. # there are no sharp edges for players to get cut fingers. # nets last longer due to reduced cord abrasion.

1800 x 1050 mm full size B1810p2

Polyboard 20 mm thick white polyvinyl.

B1810a2

Clear acrylic 20 mm thick.

B1810a

Clear acrylic 15 mm thick.

B1810g

Our backboards are available in three material types. The Polyboards are UV stable and provide good ball rebound qualities. The surface has a matt finish with painted line marking and this board type is supplied standard with all systems. Our backboards are mounted to frames in our factory using a sealing method which seals the gap between the board and the frame which reduces ball impact noise. The front face is free of mounting screws or bolts. Acrylic boards are also mounted the same way leaving the front free of screws and sealing between the board and frame. Tempered glass boards are framed with aluminium edging while the ring mounting points are kept clear of the glass to prevent shattering. All backboards have a 10 year warranty.

1200 x 900 mm practice boards B1290p

Polyboard 1 mm thick white polyvinyl.

B1290a

Clear acrylic 10 mm thick.

B1290g

Tempered glass 8 mm thick.

Tempered glass 10 mm thick. Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


- BASKETBALL -

SHF18

Backboard height adjusting frame for 1.8 m wide boards.

SHF12 (not shown)

Bp05

High density foam padding with adhesive tape for full size backboards.

Backboard height adjusting frame for 1.2 m wide boards. Used to change the ring height from 3.05m to 2.6m for junior players. Consisting of two frames sliding on rails, the board and ring can be adjusted from ground level using the BR10/ht hand tool provided. A gas lifter is fitted in the frame. Can be used with all roof and wall mounted indoor basketball units.

BR10/ht height adjusting hand tool BNW6

6mm white nylon net with attachment cord and to fit Waverail.

BNW8 (not shown) Anti-whip white nylon net (the upper section of the net is stiff), plus attachment cord to fit Waverail.

Sh41d Manual winch and driver

The worm drive winch has an adaptor for operation with an electric drill (supplied with the winch). Fitted in an enclosed metal box for wall mounting.

Sh240

240v electric winch with 6 mm cable, 200kg load capacity. The pendant lead running from the winch can be terminated to a key operated switch or push button controller. A limit switch cuts the power when maximum height is reached.

BMS

Millennium electronic score board with time out, foul count, score and time. Supplied with siren and bench control unit. 240v power supply required.

BMC

Shot clocks with LED digits. Available in number height of 100 mm, 150 mm or 200 mm. Each clock is supplied with low voltage cables to connect to the score board. Clocks require 240v power.

8

INDOOR PRODUCTS

Sh240r

240v electric winch with 6 mm cable, 200kg load capacity, radio remote controller, hard wired motion limit switch.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


9

INDOOR PRODUCTS

- DIVIDER CURTAINS -

Play Hard Sports make two types of divider curtains. Vertical lift curtains are electrically operated and can be all mesh nets or a combination of vinyl and mesh. Side draw curtains are hand drawn and can be one piece which are drawn to one side or split curtains drawn to each side.

VERTICAL LIFT

DCVL

Vertical lift curtains are suspended from a series of brackets mounted directly above the curtain. The brackets contain wheels for running the lifting cords and are either attached to overhead beams or attached to fabricated beams to span rafters. The curtain, which usually comprises a vinyl bottom section and an upper net section, hangs from a bar suspended below roof level. Cords which run from the mounting brackets through the curtain are pulled simultaneous by an electric winch to raise and lower the curtain as required.

SIDE DRAWN

DCSD

Hand drawn curtains are suspended from a cable tensioned between columns. The curtain is attached to split rings which slide along the cable. The curtain can be in two halves and drawn to each side of the hall or as one piece and drawn to one side. Tie backs (not supplied) can be used to gather the curtain. Standard mesh size is 45 mm square. Curtains are custom made for each application.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


10

- FUTSAL / HOCKEY -

INDOOR PRODUCTS

Our 3m x 2m indoor goal is available in configurations to suit futsal and hockey. The goal opening is made from 50mm square steel while the hinged side frames are 26mm steel pipe. The goals are supplied with wheel bolts that lock into EIWM10 floor plates (see page 14) but the goals can be used successfully without being locked down.

F32 - Futsal

3.0m x 2.0m x 1.0m steel frame with hinged side panels. The 50mm square sides and cross bar have a Waverail for net attachment which allows the net to be tied all the way along the bars. The tie method prolongs the life of the net and eliminates broken net hooks. Supplied with nets 2.5mm thick, 100mm square.

H32 - Hockey

The same goal as F32 but the nets have a mesh size of 40mm square.

H32b - Hockey

Similar goal as H32 but the end panels have brackets to support 490mm high side and back boards. Also supplied with nets 2.5mm thick, 40mm square mesh.

FN32

White net 2.5mm thick, 100mm mesh size for F32 goal.

F32 Futsal Goal Side wall Waverail

HN32

Black net 2.5mm thick, 40mm mesh size for H32 and H32b goals.

Cord tie Net

H32b

Waverail Net Tie

- NETBALL -

NS60i

60 mm diameter steel poles coated white. The NR11i ring has a 16 mm thick rim with patented Waverail net tie. Suits EI60 type ground sleeves (see page 14) Optional padding NP30 3.0m high x 160mm round padding.

NS60ti

NSP60i and NSP60ti

Telescopic 60 mm diameter steel poles coated white. Height adjustable from 3.05m to junior height at 2.4m. The NR11i ring has a 16 mm thick rim with patented Waverail net tie. Suits EI60 type ground sleeves (see page 14)

Both fixed height and telescopic pole types are available with a portable weighted base which alleviates the need to install floor sleeves. The base has 30kg of weight and non marking rubber wheels.

Optional padding NP24 2.4m high x 160mm round padding.

Optional padding NP30 3.0m or NP24 2.4m high padding.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


11

- NETBALL -

INDOOR PRODUCTS

All of our netball rings feature the patented Waverail TM net tie method. The benefit of this tie method is: # The net will never get caught up. # The rail will never break off. # The net lasts longer due to reduced abrasion. Assembly instructions are provided with nets. 16mm rim

Nr11i

Indoor netball ring with 16mm thick rim, 10mm thick mounting plate, BNW6 net and Waverail net tie method.

NR11i

NP18 Padding 1.8m x 160mm dia x 50mm thick with vertical velcro seam

NP24 Padding 2.4m x 160mm dia x 50mm thick with vertical velcro seam

Waverail Cord tie Net

NP30 Padding 3.0m x 160mm dia x 50mm thick with vertical velcro seam

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


12

- VOLLEYBALL -

INDOOR PRODUCTS

CHOOSING A SYSTEM: Different qualities of systems are derived from the combination of a pole type and a net type. Play Hard BASE model is the combination of V60i poles, VN22 net and VP45f padding (sleeves separate). This system is the least expensive and combines poles with four fixed height positions for volleyball and a position for badminton. The net has a cord support and is hand tensioned to cleats on the pole. Play Hard STANDARD model is the combination of V65si poles, VN30 net and VP45f padding (sleeves separate). This system has a sliding track height adjustment and a cable net tensioner. The net has a cable support and is a better quality than VN22 net. Play Hard COMPETITION model is the combination of V65si poles, VN32 net and VP45f padding (sleeves separate). This system has the same poles as the standard model but the net has antenna and side dowels. It is the dowels that allow the net to be evenly tensioned from top to bottom, not the cable. The cable supports the net, it does not tension it. Equipment can be purchased as a system package or as individual items. Note: “Stationary” pole types fit into floor sleeves 200mm deep.” Portable” style poles anchor to floor plates and are used when it is either not practical to install floor sleeves or the floor slab is too shallow.

SYSTEM PACKAGE PACKAGE MODEL CODE BASE VS60/22 BASE VST60/22 STANDARD VS65/30 COMPETITION VS65/32

POLE CODE V60i V60ip V65si V65si

POLE TYPE STATIONARY PORTABLE STATIONARY STATIONARY

INDOOR VOLLEYBALL SELECTION CHART TENSION NET METHOD HEIGHTS SUPPORT HAND 4 + BADMINTON ROPE HAND 4 + BADMINTON ROPE TENSIONER 1.55m TO 2.43m CABLE TENSIONER 1.55m TO 2.43m CABLE

NET CODE VN22 VN22 VN30 VN32

FLOOR PADDING ANCHOR VP45f EI60 or EI60f VP45f EIW/M10 VP45f EI60 or EI60f VP45f EI60 or EI60f

VS60/22 BASE PACKAGE

VS65/30 STANDARD PACKAGE (shown on next page)

* V65si steel posts have sliding height adjustment for badminton and volleyball, cable tensioner, side net tie rail, bottom cord ties to the ‘Waverail’. * VN30 net with cable support. * VP45f wrap around padding. Blue is standard but red, white or yellow also available. * Ground sleeves (see page 14) sold separately.

VS60/22 BASE PACKAGE (items also available separately)

VST60/22 BASE PACKAGE

(items also available separately)

VST60/22 contains the same

items as VS60/22 but the poles are mounted to portable bases. The portable base has 100mm dia rubber wheels for easy moving and locks into EIW/M10 floor plates. Plates are recessed into timber floors flush to the surface and centred 860mm outside the court sideline.

* V60ip steel posts 60 mm dia. with five manual height

adjustment positions. Men: 2430mm Women: 2240mm Boys: 2350mm Girls: 2150mm. * VN22 net with rope support. * VP45f wrap around padding. Blue is standard but red, white or yellow also available. * Ground sleeves (see page 14) sold separately.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


3

1

1NDOOR PRODUCTS

- VOLLEYBALL VS65/30 STANDARD PACKAGE

VS65/32 COMPETITION PACKAGE

VN22

Polyethylene net, 3 mm cord, 100 mm mesh, 9.5 m long x 0.9 m deep. PVC headband, rope tie.

(items also available separately) Not shown.

This package is similar to VS65/30 but contains a competition grade net. * V65si steel posts has sliding height adjustment for badminton and volleyball, cable tensioner, side net tie rail, bottom net cord clamp. * VN32 net with side dowel pockets, antenna and cable support. * VP45f wrap around padding. Blue is standard but red, white or yellow available. * Ground sleeves (see page 14) sold separately.

VN30 (not shown)

Polyethylene net, 3 mm cord, 100 mm mesh, 9.5 m long x 0.9 m deep. PVC headband, 4 mm plastic coated cable.

VN32 (not shown)

VN22

Polyethylene net, 3 mm cord, 100 mm mesh, 9.5 m long x 0.9 m deep. PVC headband, 4 mm plastic coated cable, 1.8 m antenna and side line net tape.

VC25

The umpire stand is made from 25 mm square tubing and has a polyboard platform.

VCP25 (not shown)

Padding covering the front and sides is optional.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


- FLOOR SLEEVES EI60

Floor sleeve 200mm deep for 60mm diameter games posts. Designed for concrete floors the sleeve can be grouted into a 110mm diameter core drilled hole. The cap and top rim of the sleeve are chrome plated. A screw driver slot in the cap provides access.

EI60 + EI60c

Floor sleeve 200mm deep for 60mm diameter games posts and access cover lid. Designed for floating timber floors over concrete. The sleeve is grouted flush into the concrete floor and the access lid id is routed into the timber playing surface. Isolating the sleeve from the timber floor allows the floor to expansion and contraction.

14

INDOOR PRODUCTS

EI60f

Floor sleeve with flange. Suited for suspended timber floors, the 200mm deep sleeve fits 60mm diameter games posts. The flange is screwed into a recess routed in the floor surface. A sleeve support pipe EI60s under the floor may be required of some floors.

EIW/M10 FLOOR PLATE

EIW/M10

This floor plate is used to anchor “T� base games posts or securing multi purpose goals. Wheel bolts on games equipment screw into the plate centre. The floor plate is screwed into a routed recess in the playing surface. The plate is chrome plated, screws not supplied. TIMBER FLOOR

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


15

- FURNITURE -

INDOOR PRODUCTS

RT1/3 RWP/12

Designed for the South Australian Aquatic Centre, the podium shape reflects the roof line and holds 12 people. We can custom design podiums for any venue or special event.

Equipment trolley stores 3 pairs of games poles plus nets, padding and balls. Painted finish, non marking wheels and castors.

RS1/2

Bolt down stand that holds two pairs of 60 mm diameter games posts. Painted finish. Available in one to four pair storage configuration. Floor anchorage bolts not supplied.

RWP/3

This winners podium holds 3 people and is made with a steel frame with carpeted timber platforms. Painted finish. Podiums can be made to fit 1 to 8 people per platform as well as wheelchair access platforms and custom designed for specific events.

RS1/3

Stand holds three pairs of 60mm dia. volleyball, netball or badminton poles.

BPB24

Players bench, 2400 L x 300 W x 400 H, 4 person, made from 17 mm ply and varnished, padding underneath to protect the floor.

RR1/2 BSB15

Scorers bench, 1500L x 600W x 750H, room for 2 chairs, made from steel frame and Polyboard cladding, folds flat for transport and storage. Supplied with brake castors.

The wall brackets hold two pairs of games posts. Bracket plates have holes for 10mm diameter anchors (not supplied). Brackets can be spaced to fit badminton, netball and volleyball poles. Painted finish.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


16

- AFL -

OUTDOOR PRODUCTS

Play Hard Sports makes steel and aluminium AFL goals as well as combined steel (bottom section) and aluminium (top section) goals. All goal posts are made from non tapered sections as we believe that tapered sections make the goals look too pointed at the top. Aluminium goals do not have the impact strength of steel goals and therefore have internal steel spigots that protrude from the sleeve to approximately 1.8m above ground level. PHS goals taller then nine metres high are mounted to spigots with hinged plates. This allows the goals to be layed down for installation and removal. Our smaller goals are lifted in and out of the sleeve. When choosing aluminium goals, be aware that thin wall sections from some suppliers are susceptible to dents from ball and player impact and tapered goals are not always desirable.

AFL GOAL SELECTION CHART

CODE AR64 AR64a AR96 AR96a AR129a AR 151a

HEIGHT GOAL BEHIND MATERIAL INSTALL GOAL 6m 4m STEEL SLEEVE 60 mm 6m 4m ALUM SLEEVE & SPIGOT 76 mm 9m 6m STEEL / ALUM SLEEVE 76/63 mm 9m 6m ALUM SLEEVE & SPIGOT 89/76mm 12 m 8m ALUM HINGED SPIGOT 127/120 mm 15 m 11 m ALUM HINGED SPIGOT 150/127/120 mm

POST SIZE PROFILE BEHIND STRAIGHT 60 mm STRAIGHT 76 mm 2 SECTION 60 mm 2 SECTION 76 mm 2 SECTION 89/76mm 3 SECTION 127/120 mm

PROFILE STRAIGHT STRAIGHT STRAIGHT STRAIGHT 2 SECTION 2 SECTION

AR64

Steel goal posts 6.0m high x 60 mm dia, behind posts 4m high x 60 mm dia, galvanised and coated white. Supplied with AE64 sleeves and steel caps . Optional: AP20 2.0m high 250mm dia. padding. AP25 2.5m high 250mm dia. padding. AP30 3.0m high 250mm dia. padding.

AR64a

AR64a

Aluminium goal posts 6.0m high x 76 mm dia, behind posts 4m high x 76 mm dia, internal support spigots, coated white. Supplied with AE64a sleeves and steel caps . Optional: AP20 2.0m high 250mm dia. padding. AP25 2.5m high 250mm dia. padding. AP30 3.0m high 250mm dia. padding.

AR96

Steel and aluminium two stage goal posts 9.0m high x 89/76 mm dia, behind posts 6m high x 60 mm dia, galvanised and coated white. Supplied with AE96 sleeves and steel caps . Optional: AP20 2.0m high 250mm dia. padding. AP25 2.5m high 250mm dia. padding. AP30 3.0m high 250mm dia. padding.

AR96a

Aluminium 2 stage goal posts 9.0m high x 89/76 mm dia, behind posts 6m high x 76 mm dia, internal support spigots, coated white. Supplied with AE96a sleeves and steel caps . Optional: AP20 2.0m high 250mm dia. padding. AP25 2.5m high 250mm dia. padding. AP30 3.0m high 250mm dia. padding.

AR129a

AR129a

Aluminium 2 stage goal posts 12.0m high x 127/120 mm dia on hinged bases, 2 stage behind posts 9m high x 89/76 mm dia, coated white, internal hinged spigots, footing cages. Supplied with AE129a sleeves, caps, spigots and cages. Optional: AP25/3 2.5m high 350mm dia. padding. AP30/3 3.0m high 350mm dia. padding.

AR151a

Aluminium 3 stage goal posts 15.0m high x 150/127/120 mm dia on hinged bases, 2 stage behind posts 11m high x 127/120 mm dia on hinged bases, internal support spigots, coated white. Supplied with AE151a sleeves, caps, spigots and cages. Optional: AP30/3 3.0m high 350mm dia. padding.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


17

- AFL -

OUTDOOR PRODUCTS

ARN Retaining Netting

AFL goal netting is designed and made specific to each venue. They can be made for permanent installation or for quick install and removal. Permanent netting to retain balls within the property generally consist of poles with cable stretched between them and the netting is suspended from the cable. Temporary installations usually have poles mounted to hinged base plates the can be raised and lowered in a quick turnaround time. The poles have pulleys at the top and rope is used to raise and lower the netting. Guy ropes are used on the outer poles to limit bowing. One consideration in choosing the size of removable installations is how quick each end needs to be removed? For example there may be 3 minutes between the practice session and the start of a game. Larger poles may require three people per pole while light 9m high poles can be lowered by one person per pole. The hinged base of our net poles consists of two spigots with base plates. The net pole fits over one spigot and the other spigot inserts into the ground sleeve. Caps are provided to cover the sleeves when not in use.

Netting 100 mm square mesh

Net pole

Goal post

Behind post

ARN Retaining Netting Size varies to suit each application Spigot and base plate assembly

Guy rope

Anchor footing Ground sleeve

AE64

Set of 8 x PVC sleeves and caps for AR64 AFL goals.

AE64a

Set of 8 x aluminium sleeves and caps for AR64a AFL goals.

AP20

AE96

Padding 2.0m high, 250 mm dia, fully enclosed in PVC tarp, internal velcro seam, set of 8. Choice of colours

AP25

Padding 2.5m high, 250 mm dia, fully enclosed in PVC tarp, internal velcro seam, set of 8. Choice of colours

Set of 8 x steel sleeves with PVC lining and caps for AR96 AFL goals. PVC sleeves set in concrete eliminated metal on metal fusing of post to sleeve.

AE96a

Set of 4 x aluminium sleeves and 4 x steel sleeves with PVC lining plus caps for AR96a AFL goals.

AE129a

Set of 4 x spigots on hinged base plates for goal posts and 4 x steel sleeves with PVC lining for behind posts plus caps for AR129a AFL goals.

AP30

Padding 3.0m high, 250 mm dia, fully enclosed in PVC tarp, internal velcro seam, set of 8. Choice of colours Hinged base plate allows goals to be lowered.

AE151a

Set of 8 x spigots on hinged base plates for goal and behind posts plus caps for AR151a AFL goals.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


18

- ATHLETICS -

OUTDOOR PRODUCTS

- THROWING - DISCUS -

TDS75

TDS75 Discus cage IAAF certified.

Features: Eight post cage with netting suspended 500mm away from the posts. Netting is 5.5m high, knotted mesh 200 ply x 44mm square. The net is attached to rail supports which are raised and lowered from each post by rope. Each pole has a vertical net retaining rope which limits the movement of the net in windy conditions. The galvanised poles have base plates which are bolted to footing cages. Poles also have rope tie cleats.

TDS72 Discus cage to club standard. (not shown)

This cage is a budget model of TDS75 Features: Seven post cage with netting suspended 500mm away from the posts. Netting is 4.5m high, knotted mesh 96 ply x 44mm square. Hot dip galvanised finish. The cage covers the same floor plan area as TDS75. The galvanised poles have base plates which are bolted to footing cages. Poles also have rope tie cleats.

TDS70 Discus practice cage Features: Steel mesh cage with 60mm dia galvanised posts, 3m high top rail and 40mm diamond wire mesh. Permanent fixture. The cage opening is 6.0m wide and has a radius of 3.0m around the throwing circle. TDS65 Removable discus cage (not shown) Features: Cage has six 48mm diameter posts with net hooks at the top. Netting is 3.0m high, 90 ply with 44mm square mesh. PVC ground sleeves are supplied with chain lid covers. The cage poles can be removed when not in use. Galvanised finish.

TDS70 TDS30

Discus circle 2.5 M diameter, made from 75 x 5mm steel and constructed in two halves which bolt together, re-inforcing rods keep the circle in shape, galvanised rim and coated white.

TDS85

Discus trolley holds 24 discus in two rows. Drop down handle and buggy wheels.

TDS35 (not shown) Portable discus circle, 2.5m diameter, made from 25mm square steel and supplied in two halves which press together. White finish. The TDS30 circle set in a concrete slab. The inside of the circle is set 20-25 mm lower and has PVC drain holes installed.

TDS95 Little “A� trolley Holds 10 discus from 350g to 1kg, 8 shot put and 6 javelin. Supplied with accessories box and buggy wheels.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


19

OUTDOOR PRODUCTS

- ATHLETICS -

- THROWING - HAMMER -

Play Hard Sports makes two models of hammer throw cages. The THM85 is an IAAF certified cage and is suitable for all levels of competition. The THM80 cage is smaller but still has movable gates and is more affordable for clubs and schools. Both cages can be used for discus. The cages are constructed from steel and are designed for permanent erection. The nets can be lowered but it is not practical to do frequently. Aluminium cages by contrast are not intended for permanent erection and are rated at very low wind speeds. Damage is often caused by strong winds so check their rating and check the council requirement. Their intended application is in venues where man power is available to dismantle them after use.

THM85 IAAF approved hammer cage.

The cage is constructed from 150 x 150 mm and 125 x 125 mm galvanised poles. Base plates on each pole are bolted to ground cages. The cages can be set below surface level to allow the playing surface to finish flush to the pole. Features: 10m high gates and adjoining panels. 7m metre high netting around the perimeter. Gate edge is tensioned rope which locates into ground anchors in the open and closed position. All netting including the gate is suspended clear of steel work. Designed for single circle use with conversion insert. Netting is 5mm braided with 44mm mesh size rated at 300kg. Separate net retaining ropes hang from the main poles and attach to ground anchors to keep the netting in its playing position. The gates are operated with opening and closing ropes. The THM85 hammer cage is rated to withstand C2 cyclonic winds.

THM80 Club and School cage.

This is a smaller version of THM85 and is suitable for club level competition. Features: Eight galvanised support poles 125 x 125mm and 100 x 100mm square. Base plates on each pole are bolted to ground cages. Six metre netting around the circle perimeter and 8m high at the gates and adjoining panels. Designed for single circle use with conversion insert. Netting is 4mm knotted polypropylene with 44mm mesh size. All netting including the gate is suspended clear of steel work. Separate net retaining ropes hang from the main poles and attach to ground anchors to keep the netting in its playing position. The gates are operated with opening and closing ropes. Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


- ATHLETICS -

20

OUTDOOR PRODUCTS

- THROWING - HAMMER THM20 Hammer circle

THM90 Hammer trolley

Circle, 2.135m diameter, made from 75 x 5 mm steel and constructed in two halves, reinforcing rods keep the circle in shape, galvanised and coated white. Note: Alternatively a TDS30 discus circle 2.5m diameter can be used with THM25 conversion circle.

Holds 12 balls with a holder for each hammer handle, buggy wheels, fold down handle.

THM25 Hammer conversion circle

Eight piece circle converting 2.5m circle to 2.135m dia for hammer use. Made from all weather synthetic material 20mm thick. Fits together with interlocking panels.

- THROWING - SHOT PUT TSP90

TJV90

TDS85

TSP32 (not shown)

Portable shot put circle made from 25mm square steel section. Supplied in two halves which press together when in use.

TSP40 TSP90 Shot trolley (javelin and discus trolleys also shown)

Holds 12 shots in two rows, buggy wheels, folding handle.

Removable steel toe plate with ground spikes, ideal for temporary use, white finish.

TSP35 Polyboard toe board 75 mm high made from UV stable polyboard with anchor bolt holes, white gloss finish. The toe board sits flush to the surface outside the circle.

TSP30

Circle, 2.135m diameter, made from 75 x 5mm steel, re-inforcing rods keep the circle in shape, galvanised and coated white, supplied in 2 halves which bolt together on site.

- THROWING JAVELIN -

Trolleys can be painted in club colours at an additional cost. The TDS90 trolley was custom painted for the 2001 Goodwill Games Brisbane.

TDS90 Multi purpose trolley Holds 6 hammers, 6 shots and 12 discus. Supplied with drop down handle and buggy wheels.

TJV90 Javelin trolley

Holds 24 javelins, buggy wheels, folding handle.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


21

- ATHLETICS -

OUTDOOR PRODUCTS

- JUMPING - HIGH JUMP THJ30 Mat cover on wheels

Steel framed mat cover with colorbond cladding, 6.0m x 3.3m x 1.2m (other sizes on request). Tilt a door opening one end, two x 400mm dia pneumatic foam filled wheels and two castors, galvanised steel frame, supplied in kit form, no sharp edges, choice of colours, assembled on site. Assembly instructions provided.

THJ55

THJ70 Stand, weighted base

Stand to support the crossbar, 35mm squ posts with sliding arm, freestanding base frame, galvanised finish.

THJ75 Stand, ground spikes

Stand to support the crossbar, 35mm squ posts with sliding arm, spiked base frame, galvanised finish.

THJ80 High jump stand

THJ75

(not shown)

Top of the range stand, 65mm square posts with sliding arm, freestanding base, painted finish.

THJ70

THJ55 Mat trolley 3 x 1.2 Trolley with sheet steel top covered with marine carpet. Pneumatic foam filled wheels and castors, tow-bar for hand or electric vehicle, 3m x 1.2m wide, can carry hurdles or high jump mats, galvanised finish. THJ50 Mat trolley 3 x 1.6 Same as THJ55 but 1.6m wide. Other sizes available on request

- JUMPING - LONG / TRIPLE JUMP -

TLJ05 Track installation trough

Steel trough 300mm wide x 1.22m long. When installed in the ground it is used to contain the long and triple jump TLJ22 take-off tray and boards.

TLJ22 Take-off tray (frame only)

Steel tray 300mm wide x 1.22m long with adjustable legs.

TLJ24 Take-off board

Marine ply take-off board 200 x 1220mm with rubber textured surface, to fit TLJ22 tray.

TLJ28 Toe board (raised plasticine profile).

TLJ25 Take-off board

TLJ25 take-off boards 200 x 75 x 1220mm hard wood painted white. Install directly in ground.

TLJ30 Toe board

TLJ30 toe boards 100 x 75 x 1220mm hard wood painted red. Install directly in ground.

Marine ply toe board 100 x 1220mm with rubber textured surface, to fit TLJ22 tray.

TLJ29 Toe board (level with take-off board)

TLJ15 Blanking tray

Steel tray 300mm wide X 1.22m long with adjustable legs. Track surface material is glued to the tray and placed into the TLJ05 installation trough when not in use.

TLJ60 Toe board trolley

Marine ply toe board 100 x 1220mm with rubber textured surface, to fit TLJ22 tray.

(not shown)

Steel trolley to carry four replacement toe boards

TLJ85 Sand leveller (not shown)

A weighted steel bar with handle and cable both ends for levelling the sand pit.

TLJ95 Tape measure rod

A “walking stick� shaped rod with a pointed end to hold the tape measure in the sand pit.

TLJ80 Sand pit cover

Poly mesh UV stable covers allow the pit to breath while keeping animals out. Made to any size. Supplied with eyelets to strap the cover to TLJ90 sand pit anchors.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


22

- ATHLETICS -

OUTDOOR PRODUCTS

- JUMPING - POLE VAULT -

TPV15 Pole vault trough

Steel trough, galvanised and coated white.

TPV20 Trough cover (not shown)

TPV55 Scoreboard 8 digits

Galvanised steel lid that sits just below surface level. Track surface material is then glued to the lid.

Scoreboard on wheels and has two rows of four digits. Can be made to suite the customers own digits or digit boxes with adjustable levers.

TPV50 Vaulting pole tree

A 1.2m high stand with eight arms. Used to support one end of the vaulting pole while athletes are practising.

TPV60 Pole vault poles

(not shown)

TPV65 Pole vault poles

(not shown)

90mm square crossbar supports with sliding extension arms. Adjustment by hand tool with a moving height gauge at eye level. Suitable for top level competition. Painted finish 65mm square crossbar supports with sliding extension arms. Adjustment by clamp with a moving height gauge at eye level. Galvanised finish.

TPV40 Vaulting pole rack

A trolley containing eight racks for carrying the vaulting poles. Has a tow bar and can be supplied with a roof (TPV45), painted finish.

- TRACK - HURDLES -

THD75 Olympic hurdle cart

Holds 25 Olympic or Club size hurdles. The tow bar has a plate to connect to electric vehicles or can be supplied with ball joint coupling. Pneumatic wheels and castors, galvanised finish. This cart can be custom made to suit the customers existing hurdles.

THD65 Little “A” hurdle cart

Holds 30 Little “A” size hurdles. The tow bar has a plate to connect to electric vehicles plus a hand tow bar. Wheels are 300mm diameter with roller bearings. This cart is made at the time of order to suit the type of hurdle it will be carrying.

TSC40 3.96m steeple chase hurdle

Height adjustable steel beam supports, galvanised finish, 3.96m long timber beam. For replacement beams order TSC10.

TSC50 5.0m steeple chase hurdle (not shown)

Height adjustable steel beam supports, galvanised finish, 5.0m long timber beam. For replacement beams order TSC15.

TSC60 Water jump hurdle

The hurdle consists of two height adjustable steel beam supports with mounting base plates. The timber hurdle beam is 3.66 cm long x 127 mm square. Women’s height is 76.2 cm and mens height is 91.4 cm.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


23

- ATHLETICS -

OUTDOOR PRODUCTS

- TRACK - HURDLES HURDLE HEIGHTS AND SPACING AGE U 9 B/G U 9 B/G U 10-11 B/G U 10-11 B/G U 12 B/G U 12 B/G U 13 B/G U 13-15 B/G U14 G U14 B U15-16 G U 15-16 B U 15-16 B/G U 17-18 G U 17-18 B U 17-18 B U17-OPEN W WOMEN MEN MEN

THD25

DIST. 60 m 80 m 60 m 80 m 60 m 80 m 80 m 300M 80 m 90 cm 90 cm 100 m 200 m 100 m 110 m 400 m 400 m 100 m 110 m 400 m

HURDLES 6 9 6 9 6 9 9 7 9 9 9 10 10 10 10 10 10 10 10 10

HEIGHT 45 cm 45 cm 60 cm 60 cm 68.6 cm 68.6 cm 76.2 cm 68.6 cm 76.2 cm 76.2 cm 76.2 cm 84 cm 76.2 cm 76.2 cm 91.4 cm 84 cm 76.2 cm 84 cm 106.7 cm 91.4 cm

ENTRY 12 m 12 m 12 m 12 m 12 m 12 m 12 m 50 m 12 m 12 m 12 m 13 m 18.29 m 13 m 13.72 cm 45 m 45 m 13 m 13.72 cm 45 m

BETWEEN 7m 7m 7m 7m 7m 7m 7m 35 m 7m 8m 8m 8.5 m 18.29 m 8.5 m 9.14 cm 35 m 35 m 8.5 m 9.14 cm 35 m

EXIT 13 m 12 m 13 m 12 m 13 m 12 m 12 m 40 m 12 m 13 m 13 m 10.5 m 17.1 m 10.5 m 14.02 m 40 m 40 m 10.5 m 14.02 m 40 m

THD26

THD25 Little “A” hurdle Fixed hurdle with heights 45 / 60 / 68.6 / 76.2 cm. Wooden batten with rounded edges. Made from 25mm square steel. THD26 Little “A” collapsable hurdle Hinged hurdle with height 45 / 60 / 68.6 / 76.2 cm. Wooden batten with rounded edges.

THD30 School hurdle

Similar to THD35 but with galvanised crossbar arms and heights from 76.2 / 84 / 91.4 / 99.1 cm. Steel frame with wooden crossbar.

THD50

THD50 Olympic weighted hurdle - manual

There are five height settings ranging from 76.2 / 84 / 91.4 / 99.1 / 106.7cm. Each leg has a counter weight and is manually adjusted by the lever on the side.

THD51 Olympic weighted hurdle - self adjust

This hurdle has an automatic weight adjustment mechanism which changes the counterweight position when the height of the bar is moved. Five height positions from 76.2 / 84 / 91.4 / 99.1 / 106.7cm.

TRN20 Starting block cart

Holds 10 full size starting blocks. The trolley has two wheels and two castors plus a tow handle. It can also be made for smaller size starting blocks.

THD35 Club hurdle

Five height positions from 76.2 / 84 / 91.4 / 99.1 / 106.7cm. Steel frame with wooden crossbar.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


24

- ATHLETICS -

OUTDOOR PRODUCTS

- STANDS -

TRN10 Lap counter

Two digit lap counter on wheels, height adjustable, includes bell. Choice of digits, TMS30 enclosed case type or TMS32 sliding panel style.

TMS55 Wind sock

Stand 1.5m high with weighted base and a sock, coated finish.

TMS92 Pigtail rope guides

Steel rope support rods with spiked base, accepts rope up to 12mm dia, galvanised finish with plastic sleeved rope loop.

TMS90 Winners Podium

Podium with three platform heights, made from steel section with carpeted timber floors, available in several sizes from one to eight persons per platform, galvanised steel frame, coated finish.

TRN35 Timers stand with roof

TRN25 Starters stand

Eight person stand with one level per person . Can also be supplied without the roof (TRN30). Wheels are mounted on the back legs.

Elevated stand with 600 x 600mm platform plus step.

TRN26 Starters stand (not shown)

Similar stand as TRN25 but has sides enclosed in a frame, mesh surrounding the platform, loud speaker support arm and items tray. Suitable for top level competition.

TRN30 Timers stand

(not shown)

Eight person stand with one level per person . Wheels are mounted on the back legs.

TMS40 Training weight sled

Steel Sled with a central peg which accepts weight lifting weights. Hook attachment for harness. Painted finish. Post

Post sleeve and cap

TRN40 Lane barrier gates

Surface

TRN45 Finish line post

Concrete Footing

Steel post 1600mm high, 115 x 40mm section coated white. The post fits into a ground sleeve for easy removal when not in use. Supplied with sleeve and cap.

The 1.0m high boom arm pivots in a ground sleeve and can be locked in place. The arm length can be ordered in lengths to span one, two or three lanes. Galvanised and painted finish with contrasting strips on the boom. Supplied with ground sleeve and cap.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


25

- BASKETBALL -

OUTDOOR PRODUCTS

Our outdoor basketball towers are the strongest and most robust on the market. There are four types: Side Swing for combined basketball and tennis courts where the tower swings to the fence line. Fixed for basketball only including half courts. Rotating for combined basketball and netball. One type is used for full size courts with separate baselines while another style is used on shortened netball courts that share the basketball baseline. Portable for temporary practice sessions.

TM

All towers are supplied with rings featuring our patented Waverail net tie system. This net tie method eliminates broken net hooks, reduces friction on the net and the net will never get caught up. Towers are also supplied with “quiet” backboards. Noise from ball impact is reduced by sealing the gap between the board and the frame. This is done in our factory and is ready for use.

TYPE SIDE SWING SIDE SWING FIXED FIXED ROTATING ROTATING PORTABLE

CODE RAPTOR RAPTOR E S125 S100 S125r SN90r SP500

APPLICATION OUTREACH BOARD FOR LONG COURTS INCORPORATING TENNIS TO 4.5 M B1810 POLY FOR LONG COURTS INCORPORATING TENNIS 4.5 M PLUS B1810 POLY POLE TO COURT BASE LINE 1.0 M 2.2 M B1810 POLY POLE TO COURT BASE LINE O.5 M 1.7 M B1810 POLY COMBINED FULL SIZE BASKETBALL AND NETBALL 2.4 M B1810 POLY BASKETBALL / NETBALL WITH ONE BASE LINE 1.2 M B1810 POLY RELOCATABLE PRACTICE TOWER 0.8 M B1290 POLY

RING R11B R11B R11B R11B R11B R11B R21a

RAPTOR - Side Swing

Application: Used when basketball and tennis are played on the same court. With a 34m long tennis court and 28m long basketball court, the Raptor 420 outreach from pole face to backboard face is 4.2m (3m from b/ball baseline to fence + 1.2m backboard overhang into b/ball court) when the pole is flush to the fence line. A 34.5m court would need a Raptor 445 outreach of 4.45m. For tennis courts longer then 34.5m, the longer extensions of Raptor E are used. For example, a 36m tennis court would require a Raptor E extension of 5.2m (4m from b/ball baseline to fence + 1.2m backboard overhang into b/ball court). Features: 150mm square main pole, twin 150 x 50mm extension arms, full size backboard frame, hot dip galvanised, 300kg load rating ring, noise dampened board to frame mounting, all weather Polyboard, Waverail ring net attachment (eliminated broken net hooks and net entanglement). All basketball tower models have been load and cycle tested and comply to Queensland Education Basketball Equipment Specifications 2006.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


- BASKETBALL -

26

OUTDOOR PRODUCTS

S125

Application: For full size basketball courts, council half courts and practice areas.

All basketball tower models have been load and cycle tested and comply to Queensland Education Basketball Equipment Specifications 2006.

This tower is gives a full metre clearance from the baseline to the pole face and is extremely durable and rigid. For ease of handling, the pole and arm are supplied separately. The board is fixed to the backboard frame in factory. Features: 125mm square main pole, 150 x 100mm extension arm, full size backboard frame, hot dip galvanised, 300kg load rating ring, noise dampened board to frame mounting, all weather Polyboard backboard, Waverail basketball ring net attachment (eliminated broken net hooks and net entanglement). S125 basketball tower has been tested and complies to Queensland Education basketball Equipment Specifications 2006.

S100

Application: For full size basketball courts and practice areas. This tower is gives half a metre clearance from the baseline to the pole face and is durable and rigid. For ease of handling, the pole and arm are supplied separately. The board is fixed to the backboard frame in factory. Features: 125mm square main pole, 100 x 100mm extension arm, full size backboard frame, hot dip galvanised, 300kg load rating ring, noise dampened board to frame mounting, all weather Polyboard backboard, Waverail basketball ring net attachment (eliminated broken net hooks and net entanglement). S100 basketball tower has been tested and complies to Queensland Education basketball Equipment Specifications 2006.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


27

- BASKETBALL -

OUTDOOR PRODUCTS

S125r - Rotating

Application: For courts with combined 30.5m long netball and 28.0m basketball.

BR10 hand turning tool

The pole sits on the netball baseline and when rotated for basketball use, the 2.40m long arm will place the backboard 1.2m inside the basketball baseline. For ease of handling, the pole and arm are supplied separately. The board is fixed to the backboard frame in factory. Features: 140mm round main pole, 150 x 100mm extension arm which rotates at the top of the main pole, full size backboard frame, hot dip galvanised, 300kg load rating ring, noise dampened board to frame mounting, all weather Polyboard backboard, Waverail basketball ring net attachment (eliminated broken net hooks and net entanglement). S125r basketball tower has been tested and complies to Queensland Education basketball Equipment Specifications 2006. Waverail net tie

SN90r - Rotating Weather proof Polyboard Backboard

300 kg load ring Net will never get caught on Waverail tie system 1.2 metre extension arm Arm rotates with aid of a hand tool

Application: For courts with combined basketball and netball courts the same length. The pole sits on the court baseline and when rotated for basketball use, the extension arm will place the backboard 1.2m inside the basketball baseline. For ease of handling, the pole and arm are supplied separately. The board is fixed to the backboard frame in factory. Features: 100mm round main pole, 100 x 100mm extension arm which rotates at the top of the main pole, full size backboard frame, hot dip galvanised, 300kg load rating ring, noise dampened board to frame mounting, all weather Polyboard backboard, Waverail basketball ring net attachment (eliminated broken net hooks and net entanglement). SN90r basketball tower has been tested and complies to Queensland Education basketball Equipment Specifications 2006.

Spring locking latch operated with hand tool

Pole is free of protrusions

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


- BASKETBALL -

28

OUTDOOR PRODUCTS

SP500 - Portable

SP500 Portable outdoor practice unit

The portable basketball unit can be operated by one person and has a hand crank for height adjustment from 3.05m to 2.20m. The wheels and locking castors allow movement over level sealed surfaces. The unit weight is 90 kg and a separate counter weight of 150 kg (not supplied) is required for stability (a wheeled container with sand or similar is ideal). In the folded position the unit measures 1800h X 900w X 800d. Backboard extension from the frame at 3050mm height is 1200mm, at 2600mm height is 1300mm. A hinged base plate folds down from the stored position to acomodate the counter weight. The standard unit is supplied with B1290p all weather rectangular backboard 1200mm x 900mm, R21a ring with net and 50mm thick padded front panel, painted finish. Optional: B1390p fan shaped backboard 1300 x 900mm.

The SP500 is also ideal for coaches on the move. The unit can be moved and operated by one person and will lay down in a trailer or ute for transportation. The dimensions when layed down are 1800mm long x 1200mm wide (the backboard is the widest part). TM

Waverail - Net Tie System

(Pat Pending)

TM

Waverail is the latest development in basketball net tie methods. With conventional ring net hooks, nets frequently tangle on the hooks, hooks often break off and players get cut fingers from net hooks when slam dunking. Advantages of Waverail # the net will never get caught up. # the wave shape rail will never break off. # there are no sharp edges for players to get cut fingers. # nets last longer because the net loop is wedged tight and does not rub against the ring.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


29

- BASKETBALL -

OUTDOOR PRODUCTS

R21a Standard fixed ring

Features: 16mm thick high tensile rim, 14mm round support arms, 5mm thick mounting plate, 250 kg load capacity, complies with QLD Education specifications. Waverail net tie system prevents the net from catching, nets last longer and there are no sharp edges.

TY

AN

R AR RW

EA

5Y

R11b Pro rim ring (supplied with all school towers) Top class fixed ring for stadium or outdoor use. This ring

will withstand slam dunking and will not bend under severe punishment. Our free replacement warranty guarantees trouble free use for life. Features: High tensile 16mm thick rim, wrap around brace, 5mm thick mounting plate and bracing, 300kg load capacity and Waverail net attachment (nets last longer and will not get caught up).

E

TIM

IFE D L TY E IT N LIM RRA A W

R12b Double rim ring

Suited to outdoor vandal prone locations. Unconditional life-time warranty. Wrap around brace, 5mm thick mounting plate, 500kg load capacity. ideal for council half courts and unsupervised play areas. Waverail net tie system.

E

TIM

IFE D L TY E IT N LIM RRA A W

Ozring Competition spring ring

The maintenance free spring requires no adjustment and will not sag over time. The ring has a 50mm wide wrap around brace provides a better visual target, 16mm high tensile rim, rubber cushioned spring return, safety side covers and Waverail net tie system that will never tangle the net.

10

A RW

A YE

Y

NT

A RR

Easy Change Kit Removable rings, brackets and tool.

TY

AN

EA

R AR RW

5Y

The ring mounting plate bolts directly to the backboard and allows the ring to be installed and removed with the hand tool. Kit comprises two R21r removable rings, two BR5 brackets and one BR10 hand tool. Complies with QLD Education load ratings. Features: 16mm thick high tensile rim, 14mm round support arms, 5mm thick mounting plates, Waverail net tie. R21r, BR5 and BR10 also sold separately.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


30

- BASKETBALL Waverail

OUTDOOR PRODUCTS

TM

(patent application) is the latest development in basketball net tie methods. With conventional ring net hooks, nets frequently tangle on the hooks, hooks often break off and players get cut fingers from net hooks when slam dunking. Advantages of Waverail # the net will never get caught up. # the wave shape rail will never break off. # there are no sharp edges for players to get cut fingers. # nets last longer due to reduced cord abrasion.

BC collars are used to butt fence rails to basketball poles in the fence line.

BC90 four sided for 90sq poles BC90/3 three sided for 90sq poles BC100 four sided for 100sq poles BC100/3 three sided for 100sq poles BC125 four sided for 125sq poles BC125/3 three sided for 125sq poles BC150 four sided for 150sq poles BC150/3 three sided for 150sq poles

1800 x 1050 mm full size B1810p

Polyboard 16 mm thick white polyvinyl.

B1810a

Clear acrylic 15 mm thick.

B1810g

Tempered glass 10 mm thick.

BNW6

6mm white nylon net with attachment cord and to fit Waverail.

BNW8 (not shown) Anti-whip white nylon net (the upper section of the net is stiff), plus attachment cord to fit Waverail. attachment.

Our backboards are available in three material types. The Polyboards are UV stable and provide good ball rebound qualities. The surface has a matt finish with painted line marking and this board type is supplied standard with all systems. Our backboards are mounted to frames in our factory using a sealing method which seals the gap between the board and the frame which reduces ball impact noise. The front face is free of mounting screws or bolts. Acrylic boards are also mounted the same way leaving the front free of screws and sealing between the board and frame. Tempered glass boards are framed with aluminium edging while the ring mounting points are kept clear of the glass to prevent shattering. All backboards have a 10 year warranty.

B18f Board frame

1.8m x 1.05m RHS backboard frame. Made from galvanised steel and coated black.

SHF18 SHF18/OD

Backboard height adjusting frame for 1.8 m wide boards, similar to SHF18 (shown above) but adapted to suit S125, S125r, S100 and SN90r outdoor basketball towers. Used to change the ring height from 3.05m to 2.6m for junior players. Consisting of two frames sliding on rails, the board and ring can be adjusted from ground level using the hand tool provided. A gas lifter is fitted in the frame. Can be used with all roof and wall mounted indoor basketball units.

BP20 Pole padding

2m x 360mm cylindrical foam with centre cut out to accommodate the pole, enclosed in PVC vinyl canvas and has vertical velcro seam at rear. Multiple colours available.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


31

-CRICKET-

OUTDOOR PRODUCTS

The prominent features of our cricket sight screen design is the low profile track and the ability to remove the screens. Most post and rail screen tracks are high and obtrusive on the landscape. Our low profile track is colour matched for each venue to blend into the background. Grounds can now provide AFL clubs with a clear field of view when cricket sight screens are removed. The track length can be varied in 2.4m segments to suit the distance from the pitch and number of pitches to be covered. Screen are made of shade cloth and are supported by masts which roll along the track. The screens size can be ordered in panels 2.0m wide and a maximum height of 6.4m.

Masts

Screen panels

Low profile track blends into the landscape allowing clear vision for AFL

Track segments

Screen width when not moved during the game

To determine screen size View angle from right arm around to left arm around the wicket Centre of pitch to screen distance Batting eye height app. 1.5m

Ball release height app. 2.3m

Screen height

Line of sight

Centre of pitch to screen distance

CW42 CW32

Steel free standing cricket stumps, full competition size of 711 mm high and 228 mm wide with 34 mm dia stumps, painted finish.

Steel heavy duty batting stumps and one bowling stump, both have thick base plates for bolting to concrete practice pitches, full competition size of 711 mm high and 228 mm wide with 34 mm dia stumps, painted finish.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


-HOCKEY-

3

OUTDOOR PRODUCTS

Our H10 hockey goal was used when Australia met China during the Sydney 2000 Olympics.

H10

H10 Competition hockey goal

Designed for top level competition, our H10 goal is the first choice for many synthetic grass venues. Features: Top quality 75 x 50mm steel frame at goal mouth, 50 x 25mm frame that completely encloses the timber boards, boards are made from 17mm thick waterproof ply and rubber lined, bolt together construction, castors at rear to allow sideways goal movement through venue gates, net support rail to stop the net sagging, white finish. Note: The steel frame keeps the boards off the wet playing surface and protects the board edges from ball impact. As a result, the boards last longer. Supplied with HN1 nets as standard.

FFC

Portable PVC corner posts, 1.5m high with vinyl flag, set of four.

FCS (not shown)

H12 Hockey goal

Suited for club and school use. Similar to H10 goal with the same high quality steel frame, but supplied with wheels instead of castors and HN2 nets. This goal does not have rubber board lining or net support rail.

Flexible corner posts with flag and ground sleeve, set of four.

HN1 Hockey goal net

Black knotted 3mm thick, 72ply polyethylene net, taped edging, thick net for competition use, strong and durable.

HN2 Hockey goal net

Black knotted 2.2mm thick, 48ply polyethylene net, taped edging, economical net for school and club use.

HB17 Replacement boards

Set of waterproof ply boards for H10, H12 or H13.

HR3 Synthetic rebound lining

Impact absorbing material glued to the timber boards. Reduces ball rebound. Supplied with goals at the time of ordering.

H13 Caged hockey goal

Ideally suited for council parks and schools. Features: Galvanised steel goal, steel mesh in place of net, bolt together construction, plastic coated ply boards enclosed in a frame, coated white, wheels at rear.. Note: Not suitable for competition use. Replacement boards available.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au

2


3

3

-NETBALL-

OUTDOOR PRODUCTS

Choosing netball poles: For permanent installations, 76mm diameter poles provide rigidity and are robust for outdoor use. For removable goals, 60mm diameter poles are lighter and more manageable. Fixed height and height adjustable goals are available in both pole diameters.

NS76 Senior height

76mm diameter poles for permanent installation, ring height 3050mm. Poles are galvanised and coated white, NR11a rings are made with 16mm solid steel with support arms and Waverail net tie.

NS60 (not shown)

As above but 60mm diameter poles, suits EHC60p hinged ground sleeves. Nets supplied. Maximum padding height is 2.8m

NS60r and adjustable

NS76t telescopic poles

60mm diameter poles with brackets for removable rings. The brackets are set at 3050mm high and 2400mm. Poles are galvanised and coated, NR31 rings are made with 16mm thick rims and have Waverail net attachment. Can be concreted in ground or supplied with EHC60p hinged ground sleeves. Supplied with nets and NR/1 installing tool.

76mm telescoping poles with height adjustment from 3050mm to 2400mm. The poles have a pin and chain for height adjustment for senior and junior levels. Poles are galvanised and coated white. NR11a rings are made with 16mm solid steel with support arms and Waverail net tie.

NS60t (not shown)

As above but 60mm telescoping poles, suits EHC60p hinged ground sleeves. Nets supplied. Maximum padding height 2.2m.

NSP60 portable senior height The portable base weighs 30kg and has wheels for easy movement. Supplied with 60mm diameter pole with NR11i rings and nets.

NSP60t portable adjustable

Same base as above but supplied with a telescopic pole for senior and junior use. NR11i rings and net supplied.

NR11a netball ring

16mm thick rim, 12mm thick support arms, Waverail net tie

All of our netball rings feature the patented Waverail TM net tie method. The benefit of this tie method is: # The net will never get caught up. # The rail will never break off. # The net lasts longer due to reduced abrasion. Assembly instructions are provided with nets.

NR31 removable ring and NR/1 installing pole

Removable ring with Waverail plus installing pole for NS60r netball system.

16mm rim Waverail

NP28

Padding 2.8m x 160mm dia, fits rings with support arms, velcro seam.

NP22

NP18

Padding 1.8m x Padding 2.2m x 160mm dia, vertical 160mm dia, fits rings with support velcro seam. arms, velcro seam.

Cord tie Net

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


-RUGBY-

3

OUTDOOR PRODUCTS

Play Hard Sports makes steel and aluminium Rugby goals as well as combined steel (bottom section) and aluminium (top section) goals. All goal posts are made from non tapered sections as we believe that tapered sections make the goals look too pointed at the top. Aluminium goals do not have the impact strength of steel goals and therefore have internal steel spigots that protrude from the sleeve to approximately 1.8m above ground level. PHS goals higher than nine metres high are mounted to spigots with hinged plates. This allows the goals to be laid down for installation and removal. Our smaller goals are lifted in and out of the sleeve. When choosing aluminium goals, be aware that thin wall sections from some suppliers are susceptible to dents from ball and player impact and tapered goals are not always desirable.

4

RUGBY GOAL SELECTION CHART

CODE LU6 LU6a LU9 LU9a LU12a LU15a LU18a

GOAL SIZE HEIGHT DIAMETER 6m 60.3 mm 6m 76 mm 9m 76/63 mm 9m 89/76 mm 12 m 127/120 mm 15 m 150/127/120 mm 18 m 170/150/127/120 mm

PROFILE STRAIGHT STRAIGHT 2 SECTION 2 SECTION 2 SECTION 3 SECTION 4 SECTION

CROSSBAR MATERIAL SIZE MATERIAL STEEL 48 mm STEEL ALUM 48 mm STEEL STEEL / ALUM 60 mm STEEL ALUM 60 mm STEEL ALUM 100 X 50 mm ALUM ALUM ALUM 150 X 50 mm ALUM 150 X 50 mm ALUM

INSTALL SLEEVE SLEEVE & SPIGOT SLEEVE SLEEVE HINGED SPIGOT HINGED SPIGOT HINGED SPIGOT

LU6 6m high steel goals

Features: The upright posts and cross bar are made from 60.3mm steel. The cross bar clamps to the uprights. All pipe is galvanised and coated white. Supplied with LE6 PVC sleeves and caps. Option: LP20 2.0m x 250mm round padding.

LU6a 6m high aluminium goals

Features: The upright posts and cross bar are made from 76mm aluminium. The steel 48 mm cross bar clamps to the uprights. All pipe is coated white. Supplied with LE6a sleeves and caps. Option: LP20 2.0m x 250mm round padding.

LU9 9m high steel and aluminium goals

Features: The upright posts are made from 76mm dia. steel with the second stage 63mm dia aluminium. The steel bottom section gives the poles strength while the top aluminium section makes the poles easy to install by hand. Cross bar is 60mm dia steel and clamps to the uprights. All pipe is galvanised and coated white. Supplied with LE9 steel sleeves and caps. Option: LP20 2.0m x 250mm round padding.

LU9a 9m high aluminium goals

LU18a

LP20 Pole padding

Features: 2.0m high x 250mm diameter cylindrical foam fully enclosed in PVC canvas, internal vertical velcro seam.

LP20/4 Pole padding Features: 2.0m high x 400mm square foam fully enclosed in PVC canvas, internal vertical velcro seam.

LP20 LP20/5 Pole padding Features: 2.0m high x 500mm square foam fully enclosed in PVC canvas, internal vertical velcro seam.

Features: The upright posts are made from 89mm and 76mm dia. aluminium sections. Internal steel spigots give strength to the poles. The cross bar is 60mm dia steel and clamps to the uprights. All pipe is coated white. Supplied with LE9a sleeves and caps. Option: LP20 2.0m x 250mm round padding.

LU12a 12m aluminium rugby goals

Features: The upright posts are made in two sections. First section is 127mm, section two is 120mm dia, the sections are pinned in position, the cross bar is 115 x 45 steel clamped to the uprights, all metal is coated white. Supplied with LE12a hinged sleeves, cage and caps Option: LP20/4 2.0m x 400mm round padding

LU15a 15m aluminium rugby goals

Features: The upright posts are made in three sections, First section is 150mm, section two is 127mm dia, the third section is 120 mm. The cross bar is 150 x 50 aluminium and clamps to the uprights. All metal is coated white. Supplied with LE15a hinged sleeves, cages and caps Option: LP20/4 2.0m x 400mm round padding

LU18a 18m aluminium rugby goals

Features: The upright posts are made in four sections. The top two sections separate from the bottom sections for storage purposes. Section sizes are170mm, 150mm, 127mm and 120mm at the top. The cross bar is 150 x 50 aluminium and clamps to the uprights. All metal is coated white. Supplied with LE18a hinged sleeves, cages and caps Option: LP20/5 2.0m x 500mm round padding

LU9a Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


35

OUTDOOR PRODUCTS

-DUAL RUGBY / SOCCER-

DRF60 Multi-purpose goal DRF76 6m Dual rugby / soccer goal

DRF101 9m Dual rugby / soccer goal

Features: 89mm round main posts with elbows for the soccer net, Waverail net tie, strong RHS cross bar with rugby pole sleeves, rugby uprights extend 6m above the cross bar, galvanised and coated white. Benefits: The goals are packaged in five components. The cross bar bolts onto the main soccer posts while the two rugby posts insert into sleeves on the cross bar after the goal is erected. Supplied with ED89 ground sleeves and caps. Optional: FN72 white net 7.5 x 2.4 x 2.4m

Lighter duty version of DRF101. Main posts are 76mm round pipe, strong RHS cross bar with rugby pole sleeves, 60mm rugby uprights extend 3m above the cross bar, Waverail net tie, galvanised and coated white. Supplied with ED76 ground sleeves and caps. Optional: FN72 white net 7.5 x 2.4 x 2.4m

LP20 Pole padding

Features: 2.0m high x 250mm diameter cylindrical foam fully enclosed in PVC canvas, internal vertical velcro seam.

Features: 60mm round steel pipe construction. The goal mouth is 3.7m wide x 1.8m high and the rugby posts extend 1.6m above the cross bar. All galvanised materials and coated white, supplied in kit form. The net is 48ply and the mesh size is 45mm. The small mesh size allows hockey to be played as well as junior soccer and rugby. Supplied with FN37 net 3.7 x 1.8 x 1.8m and ground anchor pegs.

LP20/4 Pole padding

Features: 2.0m high x 400mm square foam fully enclosed in PVC canvas, internal vertical velcro seam.

-SOCCER-

Net track and net webbing provides seamless contact with the goal.

Ground net rail hinges up for ground maintenance.

F72as Robina Stadium QLD F72as Aluminium Stadium Goals 7.32m x 2.44m

The competition standard goals are made from 127mm diameter aluminium and feature our continuous net track system. The FW72b box shaped net has webbing sewn along the edges which slides through the goal track to form a seamless attachment. The attachment method is more efficient than net hook methods and because there are no hooks, nets last a lot longer. The steel net ground bar is hinged and can be raised for ground maintenance. Supplied with 48mm dia. FN/sp steel net tension poles and pulleys, EF72as ground sleeves and caps plus FW72b box shaped nets.

F72as

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


-SOCCERFREE STANDING GOALS

F72fa

F72fa Portable 7.32m x 2.44m Aluminium

Full frame goals made from 100mm dia aluminium tube with Waverail net attachment. The net is attached to the Waverail continuously along the goal frame with cord. This attachment method is more efficient than net hook methods where net attachment is at intervals and therefore nets last longer. Frames are made de-mountable for storage and transport. White finish. Supplied with EGC ground anchor pegs and FN72 nets and cord. Option: Goals can be ordered with net track system (see page 35) in place of Waverail and are supplied with FW72 premium nets.

F62fa Portable 6.0m x 2.0m Aluminium

The same construction details as F72fa but the goal size 6m x 2m. Supplied with EGC ground anchor pegs and FN62 nets with cord.

F52fa Portable 5.0m x 2.0m Aluminium The same construction details as F72fa but goal size 5m x 2m. Supplied with EGC ground anchor pegs and FN52 nets with cord.

3

OUTDOOR PRODUCTS

6

IN GROUND GOALS

F72pa F72pa 7.32m x 2.44m Aluminium

“P” frame goals made from 100mm dia. aluminium tube with Waverail net attachment. This attachment method is more efficient than net hook methods where net attachment is at intervals and therefore nets last longer. Frames are made de-mountable for storage and transport. White finish. Supplied with EF100 ground sleeves and caps, FN72 nets with cord. Option: Goals can be ordered with net track system (see page 35) in place of Waverail and are supplied with FW72 nets.

F62pa 6.0m x 2.0m Aluminium The same construction details as F72pa but goal size 6m x 2m. Supplied with EF100 ground sleeves and caps plus FN62 nets with cord. F52pa 5.0m x 1.7m Aluminium The same construction details as F72pa but goal size 5m x 2m. Supplied with EF100 ground sleeves and caps plus FN52 nets with cord. F72p 7.32m x 2.44m Steel

F41f Portable 4.0m x 1.5m Steel Made from 65mm square section with rounded edges, de-mountable construction with Waverail net attachment. White finish. Supplied with EGC ground anchor pegs and FN42 nets and cord.

The frame is made from 101mm dia galvanised pipe with net support elbows and Waverail net attachment. Poles are made de-mountable for storage and transport. White finish. Supplied with ES101 ground sleeves and caps plus FN72 nets with cord.

F21f Portable 2.0m x 1.0m Steel Multi purpose goal made from 32mm dia pipe, folds flat for storage, ideal junior or practice. White finish. Supplied with FN21 nets with mesh size 44mm square.

F62p 6.0m x 2.0m Steel

“P” frame goals made from 115 x 42mm round edged section with net elbows and Waverail net attachment. Poles are made de-mountable for storage and transport. White finish. Supplied with ES115 ground sleeves and caps plus FN62 nets with cord.

F52p 5.0m x 1.7m Steel

The same construction details as F62p but goal size 5m x 1.7m. Supplied with ES115 ground sleeves and caps plus FN52 nets with cord.

NET TYPES FN72 / FN62 / FN52 / FN42 Standard grade nets, polyethylene twisted, 2.5mm cord, 100mm square mesh, white. Supplied with cord for attaching to Waverail. FN72a Premium grade full size net, polyethylene twisted, 3mm cord, 100mm square mesh, white. Suits Waverail. F21f FFC

Portable PVC corner posts, 1.5m high with vinyl flag, set of four.

FFC

Waverail

Fw72 Premium grade full size net, polyethylene twisted, 3mm cord, 100mm square mesh, white. Supplied with webbing sewn along the goal mouth edges for net track system (see page 35).

FCS (not shown)

FW72b Premium grade full size box net, white PE twisted, 3.8mm cord, 7.2 x 2.4 x 1.8m with webbing sewn along the goal mouth edges for net track system (see page 35).

FFT (not shown)

FN21 Polyethylene net with 2.5mm cord, 45mm square mesh. Supplied with cord for attaching to the goal.

Flexible corner posts with flag and ground sleeve, set of four. Goal trolleys, set of two frames on wheels for transporting portable goals. A frame is placed under each end of the goal and pulled by a bar at one end.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


3

7

OUTDOOR PRODUCTS

-TENNIS-

TIW75 Internal winder net post.

The posts are made from 75mm square galvanised steel with Waverail welded from top to bottom for side net tying. Finished in gloss black two pack urethane for a long lasting shine. The non winding post has an internal hook for the net cable and a stainless steel cap. The winding post has a internal cast metal drum and worm gear to tension the net cable. The post cap has a cable wheel and like the drop down handle and name plate, are made from stainless steel. The safety handle is removable and drops flat against the post when not in use. The cable is tensioned by feeding excess net cable through a hole in the drum gear and winding the handle. Posts are supplied with sleeve cover plates. Option: EP75 PVC sleeves and EL75 steel caps. TN40 double mesh net 12.7m long with side dowels.

TBW75 Barrel winder net post.

Ideal system for multi purpose courts. The posts are made from 75mm square galvanised steel and finished with gloss two pack urethane. There are no dangerous parts protruding from the post when the net is left unattached. Posts are supplied with TBW16 barrel winder and sleeve cover plates. Option: EP75 PVC sleeves and EL75 caps, TN22 12.1 metre long and 760mm deep net.

TBW75/2 Half court net post. (not shown)

Same specifications as TBW75 but the post are 770mm high for half court tennis use. Posts are supplied with TBW16 barrel winder and sleeve cover plates. Option: EP75 PVC sleeves and EL75 caps or EHC75p PVC sleeves with a hinged lid, TN12 net 6.1m long and 600 mm deep.

TBW75

plus winder and net

TBW16 Barrel winder

(Registered Design 12373/2005)

The barrel winder is a unique winder featuring a drop down safety handle made from stainless steel. The 16mm diameter galvanised shaft fits existing external winder posts and can be used as a replacement for old conventional winders. Made from galvanised materials and coated black, the barrel winder has no sharp edges and provides a neat appearance even when the net is removed. Ideal for applications where the net is continually removed.

TBW16 and post

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


-TENNIS-

8

3

OUTDOOR PRODUCTS

TIW75/P Pivoting net posts.

Ideal for courts that are used for several sports. The wheel away system is fast and convenient and does not require the net to be adjusted. One person can wheel the net out of the way in a matter of seconds and re-align it for tennis just as quick. This model has one post pivoting in a standard ground sleeve while the other post is movable on wheels. Requires one person to operate. Spans 12.8 metres Supplied in kit form with TIW75 internal winder posts, TN40 double mesh net and EP75 PVC ground sleeve.

TBW75/P Pivoting net posts.

Similar to above but supplied with TBW75 external winder posts, TBW16 barrel winder, TN22 polyethylene net and EP75 PVC sleeve.

TIW75/F Free standing net posts. (not shown)

Similar to TIW75/P but both posts have wheels which allows the unit to be removed from the court. Requires two people to align. Supplied in kit form with TIW75 net posts and TN40 net.

TBW75/F Free standing net posts. (not shown)

Similar to TIW75/F but supplied with TBW75 external winder posts, TBW16 barrel winder and TN22 net.

TIW75/F

Free standing tennis system

TIW75/P

Pivoting tennis system

TC25

Play Hard Sports have re-defined what a budget model umpire chair is. This stylish chair is rugged with a 100 x 50mm main frame and comes with extra features that are now standard equipment. Supplied in kit form, five bolts secure the frame and screws secure the seat to its base. Standard Features: * Steel frame with seat height 1470mm. * Plastic moulded seat * Front timber skid * Rear wheels * Umbrella holder * Painted hammer finish.

TC40

Sit in comfort with this stylish chair. It has a rugged 100 x 50mm main frame and comes with all the features you need. Supplied in kit form, five bolts secure the frame and screws secure the seat to its base. Features: * Steel frame with seat height 1670mm. * Padded moulded seat. * Timber stairs and front skid. * Rear wheels. * Fold down table. * Water bottle holder. * Removable steel framed canopy with solid Polyboard cover. * Painted hammer finish.

TC60

Umpire the game in complete comfort. You can now have a show court umpire chair for your court (same model supplied to Queensland Tennis Centre). Features: * Rectangular steel frame with carpeted chair platform 700 x 800mm. * Platform enclosed on three sides with hand rails. * Height adjustable chair pedestal. * Sea captains chair, height 1970mm. * Fold away table and drink bottle holder. * Non marking front leg skid. * Wheels 200mm diameter * Removable steel framed canopy with solid Polyboard cover. Supplied in kit form.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


CENTRE STRAP ANCHORS

TN/a

Tubular centre strap anchor. Set into a concrete slab at time of pouring or grouted into a core drilled hole. Sits flush to the playing surface.

TN/ab

Eye bolt centre strap anchor. The anchor fits into a 10mm dia. hole in a concrete slab.

TN/cs

Centre strap with metal clip, 50mm wide webbing with velcro adjustable seam.

Star anchor for asphalt. The anchor has a circular head with strap bar and a spike base. Can be driven into clay or asphalt surfaces.

TN/aw

Weighted centre strap anchor. The steel rectangular eight kilogram weight has a rubber line base to protect the playing surface. Size: 300 x 115 x 38mm.

TN/m

The measuring rod hangs over the tennis net and shows when the net is tensioned to the correct height of 0.914m.

TN22 (for external winder posts)

Braided polyethylene net, 3mm cord, fabric headband, double mesh at the top, 12.2m x 0.76m.

TN12 (for ½ courts - not shown)

Braided polyethylene 2.5mm net, single mesh 45mm square, vinyl headband, 6.7m long and 600mm deep, steel cable 10m long

TN40 (for internal winder posts)

Top quality net for internal winder posts, braided polyethylene net, 3mm cord, 48mm mesh size, double mesh at top, tarpaulin headband, side dowels, 12.7m long x 760mm drop.

TN42 (for internal winder posts)

TN/as

Full drop net for internal winder posts, same mesh and quality as TN40 net but has a 900mm drop.

TSW Wind screens Made from polyester fabric with 70% density, the screens allow some wind to pass while reducing its velocity. The wind protection distance is 10x the height of the screen. Supplied with edge reinforcing, sewn D ring attachment points and attachment spring. TSP Privacy screens

Made from 80% block polyester fabric, the screens provide privacy but are not a suitable wind break (creates wind turbulence).


-VOLLEYBALL-

4

OUTDOOR PRODUCTS

0

V60 Standard

60mm round volleyball poles, net adjustment set at height levels for men’s, women’s, junior and mini volleyball plus badminton. Suits cord tensioned net VN22. Fits ground sleeves EHC60 hinged sleeves or EP60 with EL60 caps. Coated hammer finish.

V60/sq Fits tennis post sleeves Similar to V60 poles, but the base has a flange and a 75mm square base that allows the posts to be inserted into tennis net post sleeves EP75 . Suits extended net VN24 12.0m long. Coated hammer finish. V60/3 For dual courts Consists of two V60 poles and a double sided pole for courts side by side. Suits cord tensioned net VN22. Fits ground sleeves EHC60 hinged sleeves or EP60 with EL60 caps. Coated hammer finish. V60 posts with VN22 net

VN22

VN22

V75/s 75mm poles with sliding track (not shown) 75mm square poles with height adjusting track. The track has a sliding rail which contains a cable roller, ratchet winder, cleats, handle and locking pin. Height adjustment is achieved by sliding the rail along the track at set positions. Coated finish. Fits ground sleeves EHC75 hinged sleeves or EP101 with EL75 caps.

Polyethylene net, 3 mm cord, 100 mm mesh, 9.5 m long x 0.9 m deep. PVC headband, rope tie.

VN24 (not shown)

The same style net as above but extended to fit poles that are placed in tennis post sleeves which are 12.8m apart. Net size is 12.0m x 0.9m.

VN30 (not shown)

Polyethylene net, 3 mm cord, 100 mm mesh, 9.5 m long x 0.9 m deep. PVC headband, 4 mm plastic coated cable.

VN32 (not shown)

Polyethylene net, 3 mm cord, 100 mm mesh, 9.5 m long x 0.9 m deep. PVC headband, 4 mm plastic coated cable, 1.8 m antenna and side line net tape.

VN12 Beach volleyball net

Features a bright coloured vinyl headband, braided 100mm squ mesh, cord tie, 8.5m x 1.0m.

VN14 Beach volleyball net

Features a bright coloured vinyl headband, braided 100mm squ mesh, cable tie for winch tensioning. Size 9.0m x 1.0m

VP22 Pole padding

2.2m x 700mm flat wrap around pads with vertical velcro seam, covers poles and hooks.

V90 Beach volleyball poles 89mm square volleyball poles, extended ground section allows for sand fill. Net hooks set at men’s and women’s height. Supplied with cable roller and ratchet winder. Coated finish. Can be used with ES89 or EHC89 hinged ground sleeves. V90/s Beach volleyball poles with sliding track (not

shown)

89mm square volleyball poles, extended ground section allows for sand fill. The track has a sliding rail which contains a cable roller, ratchet winder, cleats, handle and locking pin. Height adjustment is achieved by sliding the rail along the track at set positions. Coated finish. Used with ES89 ground sleeves.

VB50 Line marking kit

50mm wide beach volleyball line tape. Made from cloth webbing. Sand anchors included.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


41

- HOME PRODUCTS -

HOME SPORTS

Play Hard Sports has created a range of sports products for serious home players. They are not toys, they are designed tough for long lasting use.

BASKETBALL SELECTION CHART

How to create your own system: 1. Choose a pole type to suit your purpose. There are poles that have height adjustment, others rotate and have netball attached, some are fixed height and there is also a side swing unit. Take note of the backboard size of each pole type. Your choice may depend on your need to rotate or swing the backboard out of the way when not in use, netball may be good to have, some towers are better suited for use on tennis courts and you may need to cater for junior players. 2. Choose the type of material for the backboard. Polyboard is a white all weather board with good ball rebound. Tempered glass is scratch resistant, safe and very good ball rebound quality. Acrylic is cheaper than glass boards but is more susceptible to scratches and it will cloud up over time. 3. Choose a ring type. Ozring is a competition quality spring tensioned ring. R11b is a pro style ring with wrap around brace while R21a is a conventional type ring with high load capacity.

POLE NAME POLE TYPE BOARD SIZE HEIGHT BOARD EXTENSION ADJUSTMENT POLE SIZE FINISH GROUND SLEEVE LIMITED WARRANTY BACK BOARD CHOICES 16 MM POLYBOARD 15 MM ACRYLIC 10 MM GLASS 13 MM POLYBOARD 20 MM FAN POLYBOARD 10 MM ACRYLIC 8 MM GLASS RING CHOICES SPRING TENSIONED PREMIUM RING STANDARD RING

MOTHER BOARD Fixed 1800 X 1050

FORCE 10 Fixed 1800 X 1050

3050 1700 NIL 125 Squ. SILVER NO 10 YEARS

3050 1200 NIL 125Squ. BLACK NO 10 YEARS

B1810p B1810a B1810g

B1810p B1810a B1810g

OZRING R11b R21a

OZRING R11b R21a

LEGEND Fixed 1200 X 900 / 1300 X 900 3050 850 NIL 90 Squ. BLACK YES 10 YEARS

PLAY MAKER Rotating 1200 X 900 / 1300 X 900 3050 750 NIL 100 Dia. BLACK YES 5 YEARS

HOT SHOTS Rotating 1200 X 900 / 1300 X 900 3050 750 Nil 100 Dia. BLACK YES 5 YEARS

POWER GAME PRO CHANGER Adjust/Rotate Adjust/Rotate 1200 X 900 / 1200 X 900 / 1300 X 900 1300 X 900 3050-2200 3050-2200 750 750 Crank Crank 100 Dia. 100 Dia. BLACK BLACK YES YES 5 YEARS 5 YEARS

RAPTOR 170 Side Swing 1800 X 1050 3050 1700 NIL 125 Squ. BLACK NO 5 YEARS B1810p B1810a B1810g

B1290p B1390f B1290a B1290g

B1290p B1390f B1290a B1290g

B1290p B1390f B1290a B1290g

B1290p B1390f B1290a B1290g

B1290p B1390f B1290a B1290g

OZRING R11b R21a

OZRING R11b R21a

OZRING R11b R21a

OZRING R11b R21a

OZRING R11b R21a

OZRING R11b R21a

MOTHER BOARD The ultimate home basketball unit This is a full size system with a huge 125 mm square hot dip galvanised pole. Built for maximum durability. Features: * The extension arm bolts onto the main pole and extends the backboard 1700 mm from the pole. The baseline marking will be 500 mm clear of the pole. * 1800 x 1050 regulation size backboard and full size steel support frame. * The ball rebound quality is the same as competition venues so you can practice the same as you would play.

Mother Board with B1810p and R11b ring

Mother Board with B1810p and Ozring

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


- HOME PRODUCTS -

42

HOME SPORTS

FORCE 10 Full size basketball unit This full size system has a huge 125 mm square pole with painted gloss urethane finish. It can be used on tennis courts as the extension arm will fit over a 3.0m high fence. Collars are available to butt fence rails to the basketball pole. Features: * The extension arm bolts onto the main pole and extends the backboard 1200 mm from the pole. Baseline marking will sit at the base of the pole. * 1800 x 1050 regulation size backboard and full size steel support frame. * The ball rebound quality is the same as competition venues so you can practice the same as you would play.

Force 10 with B1810a acrylic board and Ozring spring ring

Force 10 rear view

Force 10 with B1810p Polyboard and Ozring spring ring.

LEGEND For tennis courts The Legend pole is designed to fit over a 3.0m high tennis court fence and has a one piece main pole and a slide on extension arm. Collars are available to butt fence rails to the basketball pole. Features: * The extension slides onto the main pole and extends the backboard 800 mm from the pole. * 1200 x 900 rectangular backboard and steel support frame. * Sturdy construction for good ball rebound quality. * See the selection chart for backboard and ring choices. * Ground sleeve available. Legend with B1290a acrylic board and R21a ring

B1290g glass board and Ozring spring ring (fence height 3.6m)

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


43

HOME SPORTS

- HOME PRODUCTS -

PLAY MAKER Rotating basketball

Similar to Legend but the main pole is in two pieces for ease of installation and to allow the board to rotate when not in use. Features: * The backboard extension is 840 mm from the pole. * 1200 x 900 rectangular or 1300 x 900 mm fan shaped backboard and steel support frame. * Sturdy construction for good ball rebound quality. * See the selection chart for backboard and ring choices. * Ground sleeve included.

Play Maker with B1290g board and R21a ring.

HOT SHOTS Rotating basketball and netball This tower keeps the whole family active. Both basketball and netball rings are at the regulation height of 3.05 metres and the top pole section rotates to easily switch from one sport to the other. A spring lever half way up the pole locks the pole section in either the basketball or netball position. Features: * The basketball backboard extends 840 mm from the pole. * 1200 x 900 mm backboard and steel support frame. * Sturdy construction for good ball rebound quality. * See the selection chart for backboard and ring choices. * Supplied with a ground sleeve and cap.

90 mm dia. top pole Rotating handle

Position locking latch 100 mm dia. base pole Hot Shots with B1290p Polyboard, R21a basketball ring and NR11a netball ring

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


- HOME PRODUCTS -

44

HOME SPORTS

POWER PRO Height Adjustable

Now all the family can play with ease. The crank winder adjusts the playing height from 3.05 metres to 2.3 metres which means even the youngsters can sink a basket. Pole can be rotated to swing the board out of the way when not in use. Features: * The backboard extends 800 mm from the pole. * The crank is adjusted with a hand tool. * 1200 x 900 backboard and steel support frame. * Sturdy construction for good ball rebound quality. * See the selection chart for backboard and ring choices. * Ground sleeve available.

The crank is operated with a hand tool from ground level

Power Pro with B1290p Polyboard and R21a ring

GAME CHANGER Height Adjustable and Rotating

With Game Changer the ball is in your court. The crank winder adjusts the basketball ring height from 3.05 metres to 2.3 metres while the crank hand tool can be used to change the netball ring height from 3.05 metres to 2.4 metres. Features: * The backboard extends 800 mm from the pole. * The hand tool adjusts the basketball crank and Hand adjusting tool moves the netball goal from one bracket to another. * Rectangular or fan shaped backboard and steel support frame. * Sturdy construction for good ball rebound quality. Game Changer with B1290g glass board, * See the selection chart for backboard and ring choices. R21a basketball ring and NR11a netball ring.

90 mm dia. top pole Rotating handle

Position locking latch 100 mm dia. base pole

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


45

- HOME PRODUCTS -

HOME SPORTS

RAPTOR 170 Side Swing Designed for play areas where the backboard needs to be swung out of the way when not in use. The Raptor 170 extension arms hinges on a mounting plate which is bolted to the main pole. The twin arms allow the board to swing and remain parallel. Features: * The backboard extends 1700 mm from the pole. * A hand tool is used to swing the board and lock into position. * 1800 x 1050 backboard and steel support frame. * Sturdy construction for good ball rebound quality.

Waverail

R21a Standard ring with 16mm thick rim, support arms and 5mm thick mounting plate. The Waverail net tie eliminates nets getting caught on the rim.

R11b

Top class ring with 300 kg load capacity. The wrap around brace provides better visual target for shooting, 16 mm high tensile rim, Waverail net tie. Our 10 year warranty means trouble free use.

Backboard Materials. Our backboards are made from three different materials. * Polyboard is a solid UV resistant weatherproof PVC. It has good ball rebound quality and has a life expectancy of 20+ years. Polyboards are seamlessly attached to steel frames which leaves a clean screw free front surface. * Acrylic boards provide clear vision but will cloud up over time. Ball rebound is good. Acrylic is dearer than Polyboard and also heavier. * Tempered glass has the best ball rebound quality and although dearer than acrylic it is cheaper than Perspex. Our methods of mounting glass for basketball applications makes this product safe for domestic applications. All our backboards are secured to the mounting frame with air tight seals to reduce ball impact noise. It’s quieter.

Ozring

Competition standard spring ring. The unique leaf spring is maintenance free and will not sag over time. This ring is firm but has an ideal soft touch which shooters love. Waverail net tie system.

SIZE 1800 X 1050 MM

B1390f

B1810p Polyboard

B1390f Fan Board

1800 x 1050 x 16mm white solid PVC with black markings.

B1810a Acrylic

1800 x 1050 x 15mm clear with white trim.

B1810g Tempered Glass

1800 x 1050 x 10mm with white trim.

(patent pending) is the latest development in basketball net ties. With conventional net hooks, nets frequently tangle on the hooks, hooks often break off and players get cut fingers when slam dunking. Advantages of Waverail # the net will never get caught up. # the Waverail will never break off. # there are no sharp edges for players to get cut fingers. # nets last longer due to reduced cord abrasion.

SIZE 1300 X 900 MM

B1810p

TM

SIZE 1200 X 900 MM

B1290g

1300 x 900 x 20mm white solid PVC with black markings.

B1290p Polyboard TM

1200 x 900 x 13mm white solid PVC with black markings.

B1290a Acrylic

1200 x 900 x 10mm clear with white trim.

B1290g Tempered Glass

1200 x 900 x 8mm with white trim.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


46

- HOME PRODUCTS -

HOME SPORTS

NR11a Netball ring with 16mm

thick rim, 12mm thick support arms, Waverail net tie. Supplied with net.

NP18

Padding 1.8 m x 160 mm dia, vinyl cover over foam, vertical velcro seam.

GOAL ATTACK

The netball package contains a 60 mm round telescopic pole with ring height adjustment from 3.05 m to 1.8 m, NR11a ring, net and EHC60 ground sleeve with hinged lid. Goal Attack can be installed in lots of places around home. Install the ground sleeve into a hole 500 mm deep and 400 mm wide, use a spirit level and fill with cement. Great for all ages.

TIW75/P Pivoting net posts.

Ideal for courts that are used for several sports. The wheel away system is fast and convenient and requires just one person to operate in a matter of seconds. This model has one post pivoting in a standard ground sleeve while the other post is movable on wheels. Spans 12.8 metres Supplied in kit form with TIW75 internal winder posts, TN40 double mesh net and EP75 PVC ground sleeve.

TBW75/P Pivoting net posts.

Similar to above but supplied with TBW75 external winder posts, TBW16 barrel winder, TN22 polyethylene net and EP75 PVC sleeve.

NSP60t

Used when it is impractical to install a ground sleeve, the weighted portable base with height adjustable pole is ideal. The pole is adjustable from 3.05 m to 1.8 m. Supplied with NR11a ring and net. The base weighs 30kg and has two non marking wheels for easy movement.

TIW75 Internal winder net post.

The posts are made from 75mm square galvanised steel finished in gloss black urethane for a long lasting shine. The winding post has internal cast metal gears to tension the net cable. The post cap, drop down handle and name plate are made from stainless steel. The safety handle is removable and drops flat against the post when not in use. Posts are supplied with sleeve cover plates. Option: EP75 PVC sleeves and EL75 steel caps. TN40 double mesh net 12.7m long with side dowels.

TBW16 Barrel winder

(Registered Design 12373/2005)

The barrel winder is a unique winder featuring a drop down safety handle and can be used as a replacement for old conventional winders. Ideal for applications where the net is continually removed.

TBW75 External winder post.

The posts are made from 75mm square galvanised steel and have a gloss urethane finish. Posts are supplied with TBW16 barrel winder and sleeve cover plates. Option: EP75 PVC sleeves and EL75 caps, TN22 net, 12.1 metre long and 760mm deep.

TBW75/2 Half court net post. (not shown) Same specifications as TBW75 but the post are 770mm high for half court tennis use. Posts are supplied with TBW16 barrel winder and sleeve cover plates. Option: EP75 PVC sleeves and EL75 caps or EHC75p PVC sleeves with a hinged lid, TN12 net 6.1m long and 600 mm deep.

More information on tennis products can be found in the Outdoor Products section, pages 37 - 39.

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


47

- HOME PRODUCTS -

HOME SPORTS

Because you want your court to look good Play Hard Sports has added style to its range of umpire chairs. All chairs feature 100 x 50mm or 150 x 50mm steel leg frame with centrally supported stairs. Standard features on all chairs include front non marking skid, rear wheels and arm rests. You will never look better umpiring the game. For full details see page 38.

F21f

Multi-purpose goal 2.0m x 1.0m x 1.0m that can be used for several activities including soccer and hockey. Great for practice. Folds flat for storage. The frame is made from thick steel pipe while the net mesh size will trap most size balls. Painted finish. Supplied with the net detached.

VN22

F42f

Multi-purpose goal 4.0m x 1.5m x 1.5m for home games and shooting practice. The frame is made from thick steel pipe with soccer net. Supplied in kit form. Painted finish.

cricket stumps, full competition size of 711mm high and 228mm wide with 34mm dia stumps, painted finish.

G4 Aluminium golf cup 105mm

diameter and 152mm long, powder coated. G/ca Steel painted cap to fit G4. G/f Fibreglass flag pole 700mm long with flag.

EP60 + EL60

V60

60mm round volleyball poles, net height positions at 2.43m, 2.35m, 2.24m, 2.15m, 2.0m and badminton at 1.55m. Suits cord tensioned net VN22. Fits ground sleeves EHC60 hinged sleeves or EP60 with EL60 cap. Coated hammer finish.

V40 (not shown)

CW32 Free standing steel

GN1

Golf practice net with a hinged frame for mounting to tennis fences. The net has a 20mm mesh and is 4.2m wide x 3.0m high. The “U� shaped steel frame supports the net and swings to the fence line when not in use. The hinged support arms bolt onto the fence posts. Painted finish. Supplied in kit form.

Portable volleyball poles with a spike base for grass or sand, 38mm two piece steel poles, spring guy ropes and pegs. Suits VN22 net or VN12 coloured beach volleyball net. Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


- GROUND SLEEVES EP / ES / EA TYPE SLEEVES AND EL CAPS

The above diagram shows a typical ground sleeve installation and should not be used for all installations.

EHC TYPE HINGED LID SLEEVES

The above diagram shows a typical ground sleeve installation and should not be used for all installations.

EA ground sleeves are made from aluminium and when used for steel games posts, have a PVC lining. EP ground sleeves are made from PVC tubing and are ideal for steel and aluminium games posts because there is no likely fusion between the post and sleeve. They are strong when incased in concrete. ES ground sleeves are made of steel and in some instances have a PVC lining to limit the amount of play between the sleeve and games post.

48

GROUND SLEEVES

EHC hinged ground sleeves similar to EA/EP/ES sleeves but have a hinged lid attached to the sleeve. PVC sleeves have a steel surround fitted to the top of the sleeve which houses the hinged lid. Steel and aluminium sleeves have the hinge mechanism welded to the top of the sleeves. Numbers appearing after the sleeve code refer to the size of the games post. EHC75 refers to hinged ground sleeves for 75 mm games posts.

EL caps are made from steel and are hot dip galvanised. Numbers appearing after the sleeve code refer to the size of the games post. EP60 and EL60 refer to PVC sleeves for 60mm diameter games posts with caps to suit. Hinged spigots are used on games posts where it is convenient to lay the posts down for install and removal instead of lifting posts out of a sleeve. AFL and Rugby goals plus retaining netting poles are examples of where this method is used. The system consists of a ground sleeve and a two piece spigot which is hinged in the middle. The bottom section of the spigot fits into the ground sleeve while the games post fits over the top section of the spigot. Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


49

SPORTS DIMENSIONS

- COURT LAYOUTS -

SEE: BADMINTON PAGE 4; NETBALL PAGE 11; VOLLEYBALL PAGE 13; BEACH VOLLEYBALL PAGE 40

AFL GOAL POSTS GOALS ARE MADE IN SIZES FROM 4.0 - 15.0 METRES HIGH SEE PAGE 16

ATHLETICS LONG / TRIPLE JUMP LAYOUT

DISTANCES SHOULD BE ADJUSTED APPROPRIATE TO THE LEVEL OF COMPETITION

TAKE OFF BOARDS TRIPLE JUMP BOARD USE TLJ25 (PAGE 21) LONG JUMP TROUGH INSERTS USE TLJ05 (PAGE 21) TAKE OFF TRAY USE TLJ22 (PAGE 21) TAKE OFF BOARD USE TLJ24 (PAGE 21) TOE BOARDS USE TLJ28 OR TLJ29 (PAGE 21) Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


- COURT LAYOUTS -

50

SPORTS DIMENSIONS

SEE: BADMINTON PAGE 4; NETBALL PAGE 11; VOLLEYBALL PAGE 13; BEACH VOLLEYBALL PAGE 40 BASKETBALL COURT LAYOUT

LINE WIDTH 50 MM: LINES ARE NOT PART OF THE FIELD OF PLAY SPACE AROUND THE FIELD: MINIMUM 2.0 METRES ALL ROUND

BASKETBALL KEY WAY LAYOUT LINE WIDTH 50 MM

BASKETBALL TOWERS FOR INDOOR BASKETBALL UNITS: CHOOSE SR50 FOR ROOF MOUNTED (PAGE 5) CHOOSE SW40 FOR WALL MOUNTED (PAGE 6) FOR OUTDOOR TOWERS: SEE THE SELECTION CHART (PAGE 25) FIXED POSITION TOWERS (PAGE 26) ROTATING TOWERS (PAGE 27) SIDE SWING TOWERS (PAGE 25) PORTABLE UNIT (PAGE 28)

CRICKET PITCH LAYOUT LINE WIDTH 40 MM:

STUMPS 711 MM X 228 MM

CRICKET STUMPS FREE STANDING PRACTICE STUMPS USE CW32 (PAGE 31) FOR BOLT DOWN PRACTICE STUMPS USE CW42 9PAGE 31) Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


51

SPORTS DIMENSIONS

- COURT LAYOUTS -

SEE: BADMINTON PAGE 4; NETBALL PAGE 11; VOLLEYBALL PAGE 13; BEACH VOLLEYBALL PAGE 40 HOCKEY FIELD LAYOUT

LINE WIDTH 75 MM: LINES ARE PART OF THE FIELD OF PLAY SPACE AROUND THE FIELD: MINIMUM 2.0 METRES ALL ROUND

HOCKEY GOALS USE H10 OR H12 GOALS (PAGE 32) FOR CORNER POSTS USE FFC OR FCS (PAGE 32)

FUTSAL COURT DIMENSIONS ALL LINE MARKINGS 80 MM WIDE

FOR INDOOR GOALS USE F32 (PAGE 10) Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


- COURT LAYOUTS -

52

SPORTS DIMENSIONS

SEE: BADMINTON PAGE 4; NETBALL PAGE 11; VOLLEYBALL PAGE 13; BEACH VOLLEYBALL PAGE 40 RUGBY LEAGUE FIELD LAYOUT

LINE WIDTH 150 MM: LINES ARE NOT PART OF THE FIELD OF PLAY SPACE AROUND THE FIELD: MINIMUM 3.0 METRES ALL ROUND

RUGBY GOALS THERE IS A CHOICE OF GOALS FROM 6 METRES HIGH TO 18 METRE HIGH STADIUM GOALS. SEE THE SELECTION CHART ON PAGE 34

SOCCER FIELD LAYOUT

LINE WIDTH 120 MM: LINES ARE PART OF THE FIELD OF PLAY SPACE AROUND THE FIELD: MINIMUM 3.0 METRES ALL ROUND

SOCCER GOALS THERE IS A CHOICE OF FREE STANDING GOALS OR GOALS MOUNTED IN GROUND SLEEVES (PAGE 36)

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au


53

- COURT LAYOUTS -

SPORTS DIMENSIONS

SEE: BADMINTON PAGE 4; NETBALL PAGE 11; VOLLEYBALL PAGE 13; BEACH VOLLEYBALL PAGE 40 TENNIS COURT LAYOUT

LINE WIDTH 50 MM: LINES ARE PART OF THE FIELD OF PLAY SPACE AROUND THE FIELD: MINIMUM 5.5 METRES AT BACK AND 3.05 METRES AT SIDES

TENNIS NET POSTS FOR INTERNAL WINDER POSTS USE TIW75 (PAGE 37) FOR EXTERNAL WINDER POSTS USE TBW75 (PAGE 37) FOR FREE STANDING POSTS USE TIW75/F OR TBW75/F (PAGE 38) FOR PIVOTING POSTS USE TIW75/P OR TBW75/P (PAGE 38)

MULTI COURT LAYOUT

1 X BASKETBALL, 1 X NETBALL, 1 X VOLLEYBALL 2 X BADMINTON (PERPENDICULAR)

Phone: 1300 851 518 or (07) 5593 4494 Fax: (07) 5593 4338 Email: email@playhardsports.com.au Web: www.playhardsports.com.au

2014 catalogue  

Celebrating 21 years of designing and manufacturing sports equipment form Australia office - here is our latest catalogue

Read more
Read more
Similar to
Popular now
Just for you