Page 1

Welcome to plasti-fab.com

Presented By Ron


For Waste Water Products Which are Corrosion Resistant Like the Slide Gate

ď Ž

For industrial and infrastructural uses, there is a definite market for corrosion resistant equipment which can measure and control the fluids that can function very well in flumes, weirs, basins, lagoons, reservoirs and other waterways. The equipments designed for such purposes have to be functional with high strength, durability, easy to install characteristics, and also requiring very low maintenance. The revolutionary fiberglass reinforced plastic (FRP) products are best while getting these equipments customized to the typical industrial use. The various products designed for the purposes are flumes, shelters, gates, manholes, skimmers, gages and stop logs. Each is applied in its designated use.


ď Ž

In abusive environments all around the world, such FRP engineered products are in great demand and help the water control and management by being very effective. There are the flumes which come in wide ranges and are custom made. Also are the shelters which are least on maintenance and provide an electrically non-conducting environment with no possibility of rust or decay. The gages too manufactured by the FRP never fade, warp or chip. Various other manholes and skimmers are also used to channel and clarify the fluids with no room for corrosion. The products are all industry tested and come highly recommended and help in the sure shot management of the waterways in the industrial setup.


The gates specifically are made to make sure there is minimal leakage and they adhere to the stringent design specifications. They are strong and are manufactured or engineered as composite gates of very high quality that close tolerances. Likewise there is the stop log which is put to use by engineers all over the world in various applications. The heavy duty stop log has been in the market since two decades now. They have been very successful in their desired use. Among the gates there are many types like the flap gate, weir gate and the heavy duty slide gate. They are engineered to have long life, have low friction, are light weight with a superior design and easy installation techniques. Qualities that make the various gates and the stop log function-


The gates are suitable for all applications where corrosion resistant equipment is a must. Hence they are best used for sea water and for water which has a low pH. The down opening gates can control the upstream water level successfully and can also manage the discharge from the water system. The Titeseal gate is a better alternative than the metallic gates often referred to as the sluice gates. With a unique construction, the stop logs are phenomenal in fish hatcheries, composting facilities, sludge drying beds and water treatment plants. These products are made from the fiberglass reinforced plastics and therefore are impervious to moisture and would consequently never swell or decay unlike the wood logs. The products are desirably produced or crafted using the fiberglass reinforced plastic which have the unique ability to be corrosion resistant.


Contact us: 

    

Address – 9665 SW Tualatin-Sherwood Road City/Town- Tualatin State- Oregon Country- USA ZIP/Postal Code- 97062 www.plasti-fab.com

Welcome to plasti fab com  

The Plasti-Fab engineered composite Slide Gate is the ideal solution for corrosive environments that have had metal gates seize up, or freez...

Read more
Read more
Similar to
Popular now
Just for you