Page 1

ITW PHILADELPHIA RESINS RELEASE AGENT

Technical Bulletin # 814A

ITW PHILADELPHIA RESINS RELEASE AGENT prevents adhesion between most ITW Philadelphia Resins' products and surfaces of metal, glass, rubber and many plastics. It is used where the minimum possible clearance between resin and mating surface is required. RELEASE AGENT does not contain silicone oils. When properly used the release agent coating is only a few molecules thick and there is minimal, usually zero, transfer to the cast resin. The aerosol spray can should be held 9" to 12" from the surface and a maximum of 1 second of spray on any given area will be ample. The surface should not appear wet even when freshly sprayed. Do not substitute other release agents for ITW PHILADELPHIA RESINS RELEASE AGENT without testing their effect on adhesion, clearance and surface bubbling.

ITW PHILADELPHIA RESINS

130 Commerce Drive • Montgomeryville, PA 18936 • 215-855-8450 • Fax 215-855-4688 All printed statements, data and recommendations are based on reliable information and are presented without any guarantee or warranty. Statements regarding the use of ITW Philadelphia Resins products and processes are not to be construed as recommendations for use in violation of any applicable laws, regulations or patent rights. © All rights reserved.

814 ITW Realease Agent  

814 ITW Realease Agent

Read more
Read more
Similar to
Popular now
Just for you