Page 1

10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 1

THREE PART GLASS SPECIFICATION ONLINE DATA SHEET SECTION 08810 PART 1 GENERAL 1.1

SECTION INCLUDES High performance architectural glass. High performance architectural insulating glass.

1.2

RELATED SECTIONS Section 08400 – Entrances and Storefronts: Exterior Entrances and Storefront. Section 08500 – Windows: Exterior Windows. Section 08900 – Glazed Curtainwall: Exterior Curtainwall.

1.3

REFERENCES ANSI Z97.1 – American National Standard for Glazing Materials Used in Buildings – Safety Performance Specifications and Methods of Test. ASCE 7 – “ Minimum Design Loads for Buildings and Other Structures.” ASTM International (ASTM): ASTM C 162 – Standard Terminology of Glass and Glass Products. ASTM C 1036 – Standard Specification for Flat Glass. ASTM C 1048 – Standard Specification for Heat-Treated Flat Glass — Kind HS, Kind FT Coated and Uncoated Glass. ASTM C 1172 – Standard Specification for Laminated Architectural Flat Glass. ASTM C 1376 – Standard Specification for Pyrolitic and Vacuum Deposition Coatings on Flat Glass. ASTM E 2188 – Standard Test Method for Insulating Glass Unit Performance. ASTM E 2189 – Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units. ASTM E 2190 – Standard Specification for Insulating Glass Unit Performance and Evaluation.

1.4

DEFINITIONS Manufacturers of Glass Products: Firms that produce primary glass, fabricated glass, or both, as defined in referenced glazing publications. Glass Thicknesses: Indicated by thickness designations in millimeters according to ASTM C 1036. Interspace: Space between lites of an insulating-glass unit that contains dehydrated air or other specified gas. Sealed Insulating Glass Unit Surface Designations: Surface 1 – Exterior surface of the outer glass lite. Surface 2 – Interspace surface of the outer glass lite. Surface 3 – Interspace surface of the inner glass lite. Surface 4 – Interior surface of the inner glass lite.

1


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 2

THREE PART GLASS SPECIFICATION ONLINE DATA SHEET 1.5

PERFORMANCE REQUIREMENTS General: Provide glass capable of withstanding thermal movement and wind and impact loads (where applicable) as specified in following paragraph. Glass Design: Glass thickness designations indicated are minimums and are for detailing only. Confirm glass thicknesses by analyzing Project loads and in-service conditions. Provide glass lites in the thickness designations indicated for various size openings, but not less than thicknesses and in strengths (annealed or heat treated) required to meet or exceed the following criteria: Glass Thicknesses: Select minimum glass thicknesses to comply with ASTM E 1300, according to the following requirements: Design Wind Loads: Determine design wind loads applicable to the Project according to ASCE 7, “ Minimum Design Loads for Buildings and Other Structures”: Section 6.5, “ Method 2–Analytical Procedure,” based on mean roof heights above grade indicated on Drawings. Basic Wind Speed: ______ mph. Importance Factor: ______. Exposure Category: ______. Specified Design Snow Loads: As indicated on Drawings, but not less than snow loads applicable to Project as required by ASCE 7, “ Minimum Design Loads for Buildings and Other Structures”: Section 7.0, “ Snow Loads.” Probability of Breakage for Vertical Glazing: ______ lites per 1000 for lites set vertically or not more than 15 degrees off vertical. Wind Load Duration: Short duration, as defined in ASTM E 1300 or ______ seconds or less. Probability of Breakage for Sloped Glazing: ______ per 1000 for lites set greater than 15 degrees off vertical. Wind Load Duration: Short duration, as defined in ASTM E 1300 or ______ seconds or less. Snow Load Duration: Long duration, as defined in ASTM E 1300 or ______ days. Maximum Lateral Deflection: For the following types of glass supported on all 4 edges, provide thickness required that limits center deflection at design wind pressure to ______ times the short side length or 1 inch, whichever is less. For monolithic-glass lites heat treated to resist wind loads. For insulating glass. Thermal Movements: Provide glazing that allows for thermal movements resulting from ambient and surface temperatures changes acting on glass framing members and glazing components. Thermal and Optical Performance Properties: Provide glass with performance properties specified based on manufacturer’s published test data, as determined according to procedures indicated below: For monolithic-glass lites, properties are based on units with lites 1/4 inch (6.0 mm) thick. For insulating-glass units, properties are based on units of thickness indicated for overall unit and for each lite. Center-of-Glass Values: Based on using LBL-44789 WINDOW 5.0 computer program for the following methodologies: U-Factors: NFRC 100 expressed as Btu/sq. ft. per h per degree F. Solar Heat Gain Coefficient: NFRC 200. Solar Optical Properties: NFRC 300.

2


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 3

THREE PART GLASS SPECIFICATION ONLINE DATA SHEET 1.6

SUBMITTALS Submit under provisions of Section 01300. Product Data: For each glass product and glazing material indicated. Verification Samples: For the following products, in the form of 12 inch (305 mm) square samples for insulating glass units. Glazing Schedule: Use same designations indicated on Drawings for glazed openings in preparing a schedule listing glass types and thicknesses for each size opening and location. Product Certificates: Signed by manufacturers of glass and glazing products certifying that products furnished comply with requirements. For solar-control low-e-coated glass, provide documentation demonstrating that manufacturer of coated glass is certified by coating manufacturer. Qualification Data: For installers. Product Test Reports: For each of the following types of glazing products: Tinted float glass. Coated float glass. Insulating glass. Warranties: Special warranties specified in this Section.

1.7

QUALITY ASSURANCE Sustainable Design Certification: Glass shall be Cradle to Cradle certified, minimum Silver Level, by McDonough Braungart Design Chemistry, LLC. Fabricator Qualifications: PPG Certified Fabricator Network, as acceptable to the manufacturer. Installer Qualifications: An experienced installer who has completed glazing similar in material, design, and extent to that indicated for this Project; whose work has resulted in glass installations with a record of successful in-service performance; and who employs glass installers for this Project who are certified under the National Glass Association Glazier Certification Program as Level 2 (Senior Glaziers) or Level 3 (Master Glaziers). Source Limitations for Glass: Obtain the following through one source from a single manufacturer for each glass type: clear float glass, coated float glass and insulating glass. Glass Product Testing: Obtain glass test results for product test reports in “ Submittals” Article from a qualified independent testing agency accredited according to the NFRC CAP 1 Certification Agency Program. Glazing Publications: Comply with published recommendations of glass product manufacturers and industry organizations, including but not limited to those below, unless more stringent requirements are indicated. Refer to these publications for glazing terms not otherwise defined in this Section or in referenced standards. IGMA Publication for Insulating Glass: SIGMA TM-3000, “ Glazing Guidelines for Sealed Insulating Glass Units.” GANA Publications: “ Laminated Glazing Reference Manual”; “ Glazing Manual.” AAMA: “ Sloped Glazing Guidelines.” IGMA: “ Guidelines for Sloped Glazing.” 3


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 4

THREE PART GLASS SPECIFICATION ONLINE DATA SHEET Insulating-Glass Certification Program: Permanently marked either on spacers or on at least one component lite of units with appropriate certification label of the following testing and inspecting agency: Insulating Glass Certification Council. Associated Laboratories, Inc. Safety Glazing Products: Comply with testing requirements in 16 CFR 1201 and, for wired glass, ANSI Z97.1. Subject to compliance with requirements, obtain safety glazing products permanently marked with certification label of the Safety Glazing Certification Council or another certification agency acceptable to authorities having jurisdiction. Lites more than 9 square feet (sf) (0.84 sq. m) in area are required to be Category II materials. Where glazing units, including Kind FT glass and laminated glass, are specified in Part 2 articles for glazing lites more than 9 sf in area, provide glazing products that comply with Category II materials, and for lites 9 sf or less in area, provide glazing products that comply with Category I or II materials.

1.8

DELIVERY, STORAGE, AND HANDLING Protect glazing materials according to manufacturer’s written instructions and as needed to prevent damage to glass and glazing materials from condensation, temperature changes, direct exposure to sun, or other causes. For insulating-glass units that will be exposed to substantial altitude changes, comply with insulating-glass manufacturer’s written recommendations for venting and sealing to avoid hermetic seal ruptures.

1.9

WARRANTY Manufacturer’s Warranty for Coated-Glass Products: Manufacturer’s standard form, made out to the glass fabricator, in which the coated glass manufacturer agrees to replace coated glass units that deteriorate during normal use within the specified warranty period. Deterioration of the coated glass is defined as peeling and/or cracking, or discoloration that is not attributed to glass breakage, seal failure, improper installation, or cleaning and maintenance that is contrary to the manufacturer’s written instructions. Warranty Period: ______ years from date of Substantial Completion. Manufacturer’s Warranty on Insulating Glass: Manufacturer’s standard form in which the insulating glass unit manufacturer agrees to replace insulating-glass units that deteriorate during normal use within the specified warranty period. Deterioration of insulating-glass units is defined as an obstruction of vision by dust, moisture, or a film on the interior surfaces of the glass caused by a failure of the hermetic seal that is not attributed to glass breakage, improper installation, or cleaning and maintenance that is contrary to the manufacturer’s written instructions. Warranty Period: ______ years from date of Substantial Completion. Manufacturer’s Warranty on Laminated Glass: Manufacturer’s standard form in which the laminated glass manufacturer agrees to replace laminated glass units that deteriorate during normal use within the specified warranty period. Deterioration of laminated glass is defined as defects, such as discoloration, edge separation, or blemishes exceeding those allowed by ASTM C 1172 that are not attributed to glass breakage, improper installation, or cleaning and maintenance that is contrary to the manufacturer’s written instructions. Warranty Period: ______ years from date of Substantial Completion.

4


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 5

THREE PART GLASS SPECIFICATION ONLINE DATA SHEET PART 2 PRODUCTS 2.1

MANUFACTURERS Acceptable Manufacturer: PPG Industries, Inc., Glass Group; Glass Business and Discovery Center, 400 Guys Run Rd., Cheswick, PA 15024. ASD. Toll Free Tel: (800) 377-5267. Fax: (800) 367-2986. Web: http://www.ppgglazing.com. Substitutions: Not permitted. Requests for substitutions will be considered in accordance with provisions of Section 01600.

2.2

GLASS PRODUCTS Annealed Float Glass: ASTM C 1036, Type I (transparent flat glass), Quality-Q3; of class indicated. Heat-Treated Float Glass: ASTM C 1048; Type I (transparent flat glass); Quality-Q3; of class, kind, and condition indicated. Fabrication Process: By horizontal (roller-hearth) process with roll-wave distortion parallel to bottom edge of glass as installed, unless otherwise indicated. Provide Kind HS (heat-strengthened) float glass in place of annealed float glass where needed to resist thermal stresses induced by differential shading of individual glass lites and to comply with glass design requirements specified in Part 1 “Performance Requirements� Article. For uncoated glass, comply with requirements for Condition A. For coated vision glass, comply with requirements for Condition C (other uncoated glass). Provide Kind FT (fully tempered) float glass in place of annealed or Kind HS (heat-strengthened) float glass where safety glass is indicated or required. Pyrolitic-Coated Float Glass: ASTM C 1376, float glass with metallic-oxide coating applied by pyrolitic deposition process during initial manufacture, and complying with other requirements specified. Sputter-Coated Float Glass: ASTM C 1376, float glass with metallic-oxide or -nitride coating deposited by vacuum deposition process after manufacture and heat treatment (if any), and complying with other requirements specified. Tempered Patterned Glass: ASTM C 1048, Kind FT (fully tempered), Type II (patterned flat glass), Class 1 (clear), Form 3 (patterned); and of quality, finish, and pattern specified.

5


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 6

THREE PART GLASS SPECIFICATION ONLINE DATA SHEET Insulating-Glass Units, General: Factory-assembled units consisting of sealed lites of glass separated by a dehydrated interspace, and complying with ASTM E 774 for Class CBA units and with requirements specified in this Article and in Part 2 “ Insulating-Glass Units” Article. Provide Kind HS (heat-strengthened) float glass in place of annealed glass where needed to resist thermal stresses induced by differential shading of individual glass lites and to comply with glass design requirements specified in Part 1 “ Performance Requirements” Article. Provide Kind FT (fully tempered) glass lites where safety glass is indicated or required. Overall Unit Thickness and Thickness of Each Lite: Dimensions indicated for insulating-glass units are nominal and the overall thicknesses of units are measured perpendicularly from outer surfaces of glass lites at unit’s edge. Sealing System: Comply with requirements in Section 07920 – Joint Sealants. Dual seal, with primary and secondary sealants of polyisobutylene and silicone. Spacer Specifications: Manufacturer’s standard spacer material and construction complying with the following requirements: Spacer Material: Aluminum with mill or clear anodic finish. Desiccant: Molecular sieve or silica gel, or blend of both. Corner Construction: Manufacturer’s standard corner construction.

2.3

FABRICATION OF GLAZING UNITS Fabricate glazing units in sizes required to glaze openings indicated for Project, with edge and face clearances, edge and surface conditions, and bite complying with written instructions of product manufacturer and referenced glazing publications, to comply with system performance requirements.

6


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 7

UNCOATED INSULATING GLASS Type: Clear Insulating Glass. Clear color, low-reflective outdoor appearance. Clear + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

79%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.70

0.81

15%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) clear glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) clear glass.

Type: Uncoated Ultra-Clear Float Glass. Ultra clear, low-reflective outdoor appearance. “Starphire ®” + “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

84%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.82

0.94

15%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Starphire” glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” glass.

Type: Uncoated Tinted Insulating Glass. Light Green color, low-reflective glass outdoor appearance. “Solexia™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

69%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.49

0.57

13%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Solexia” (transparent) Float Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass.

Type: Uncoated Tinted Insulating Glass. Emerald Green color, low-reflective outdoor appearance. “Atlantica™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

60%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.40

0.47

11%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Atlantica” (transparent) Float Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass.

Type: Uncoated Tinted Insulating Glass. Aqua-Green color, low-reflective outdoor appearance. “Caribia ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

60%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.39

0.45

11%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Caribia” (transparent) Float Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass.

7


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 8

UNCOATED INSULATING GLASS Type: Uncoated Tinted Insulating Glass. Light Blue-Gray, low-reflective glass outdoor appearance. “Optiblue ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

59%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.62

0.71

10%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Optiblue” (transparent) Float Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass.

Type: Uncoated Tinted Insulating Glass. Aquamarine color, low-reflective glass outdoor appearance. “Azuria™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

61%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.39

0.45

11%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Azuria” (transparent) Float Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass.

Type: Uncoated Tinted Insulating Glass. Warm Bronze color, low-reflective glass outdoor appearance. “Solarbronze ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

47%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.51

0.59

8%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Solarbronze” (transparent) Float Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass.

Type: Uncoated Tinted Insulating Glass. Cool Gray color, low reflective glass outdoor appearance. “Solargray ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

40%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.45

0.53

7%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Solargray” (transparent) Float Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass.

8


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 9

UNCOATED INSULATING GLASS Type: Uncoated Tinted Insulating Glass. Gray color with Warm Bronze undertone, low-reflective glass outdoor appearance. “Optigray ®” 23 + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

21%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.29

0.34

6%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Optigray” 23 (transparent) Float Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass.

Type: Uncoated Tinted Insulating Glass. Dark Gray color with Cool Blue undertone, low-reflective glass outdoor appearance. “Graylite ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

12%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.34

0.39

5%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Graylite” (transparent) Float Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass.

Type: Uncoated Tinted Insulating Glass. Sky Blue color, low-reflective glass outdoor appearance. “Solarblue™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

50%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.49

0.56

9%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Solarblue” (transparent) Float Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass.

Type: Uncoated Tinted Insulating Glass. Dark Blue color, low-reflective glass outdoor appearance. “Pacifica™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

38%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.35

0.41

7%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Pacifica” (transparent) Float Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass.

9


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 10

LOW-E INSULATING GLASS Type: Low-E Clear Insulating Glass. Clear color, low-reflective glass outdoor appearance. “Sungate ®” 500 (2) Clear + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

74%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.62

0.71

17%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) Clear Glass, “Sungate” 500 (Pyrolitic) Coated on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass.

Type: Low-E Tinted Insulating Glass. Clear color, low-reflective glass outdoor appearance. Clear + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

74%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.65

0.75

17%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) Clear Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 500 (Pyrolitic) Coated on third surface (3).

Type: Pyrolitic Low-E Tinted Insulating Glass. Light Green color, low-reflective glass outdoor appearance. “Solexia™” + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

64%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.44

0.51

14%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Solexia” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 500 (Pyrolitic) Coated on third surface (3).

Type: Pyrolitic Low-E Tinted Insulating Glass. Dark Green color, low-reflective glass outdoor appearance. “Atlantica™” + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

56%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.35

0.41

12%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Atlantica™” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 500 (Pyrolitic) Coated on third surface (3).

10


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 11

LOW-E INSULATING GLASS Type: Pyrolitic Low-E Tinted Insulating Glass. Aqua-Green, low-reflective outdoor appearance. “Caribia ®” + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

56%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.34

0.40

12%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Caribia” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 500 (Pyrolitic) Coated on third surface (3).

Type: Pyrolitic Low-E Tinted Insulating Glass. Light Blue-Gray, low-reflective glass outdoor appearance. “Optiblue ®” + “Sungate®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

54%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.57

0.65

11%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Optiblue” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 500 (Pyrolitic) Coated on third surface (3).

Type: Pyrolitic Low-E Tinted Insulating Glass. Aquamarine color, low-reflective glass outdoor appearance. “Azuria™” + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

57%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.34

0.40

12%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Azuria” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 500 (Pyrolitic) Coated on third surface (3).

Type: Pyrolitic Low-E Tinted Insulating Glass. Warm Bronze color, low-reflective glass outdoor appearance. “Solarbronze ®” + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

44%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.46

0.53

9%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Solarbronze” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 500 (Pyrolitic) Coated on third surface (3).

11


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 12

LOW-E INSULATING GLASS Type: Pyrolitic Low-E Tinted Insulating Glass. Cool Gray color, low-reflective glass outdoor appearance. “Solargray ®” + “Sungate®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

37%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.40

0.47

8%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Solargray” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 500 (Pyrolitic) Coated on third surface (3).

Type: Pyrolitic Low-E Tinted Insulating Glass. Gray with Warm Bronze undertone color, low-reflective glass appearance. “Optigray ®” 23 + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

19%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.24

0.28

6%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Optigray” 23 Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 500 (Pyrolitic) Coated on third surface (3).

Type: Pyrolitic Low-E Tinted Insulating Glass. Dark Gray color, low-reflective glass outdoor appearance. “Graylite ®” + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

11%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.28

0.33

5%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Graylite” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 500 (Pyrolitic) Coated on third surface (3).

Type: Low-E Tinted Insulating Glass. Sky Blue color, low-reflective glass outdoor appearance. “Solarblue™” + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

46%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.44

0.51

10%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Solarblue” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 500 (Pyrolitic) Coated on third surface (3).

12


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 13

LOW-E INSULATING GLASS Type: Low-E Tinted Insulating Glass. Dark Blue color, low-reflective glass outdoor appearance. “Pacifica™” + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

35%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.30

0.35

7%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Pacifica” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 500 (Pyrolitic) Coated on third surface (3).

Type: Low-E Clear Insulating Glass. Clear color, low-reflective glass outdoor appearance. “Sungate®” 400 (2) Clear + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

76%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.60

0.69

14%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) Clear Glass, “Sungate” 400 (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass.

Type: Low-E Tinted Insulating Glass. Light Green color, low-reflective glass outdoor appearance. Clear + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

76%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.63

0.73

14%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) Clear Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 400 (Sputtered) Coated on third surface (3).

Type: Low-E Tinted Insulating Glass. Light Green color, low-reflective glass outdoor appearance. “Solexia™” + “Sungate®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

66%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.44

0.50

12%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Solexia” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 400 (Sputtered) Coated on third surface (3).

13


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 14

LOW-E INSULATING GLASS Type: Low-E Tinted Insulating Glass. Dark Green color, low-reflective glass outdoor appearance. “Atlantica™” + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

58%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.35

0.40

10%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Atlantica” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 400 (Sputtered) Coated on third surface (3).

Type: Low-E Tinted Insulating Glass. Aqua-Green, low-reflective glass outdoor appearance. “Caribia ®” + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

58%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.34

0.39

10%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Caribia” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 400 (Sputtered) Coated on third surface (3).

Type: Low-E Tinted Insulating Glass. Light Blue-Gray, low-reflective glass outdoor appearance. “Optiblue ®” + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

55%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.53

0.62

9%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Optiblue” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 400 (Sputtered) Coated on third surface (3).

Type: Low-E Tinted Insulating Glass. Aquamarine color, low-reflective glass outdoor appearance. “Azuria™” + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

59%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.34

0.39

10%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Azuria” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 400 (Sputtered) Coated on third surface (3).

14


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 15

LOW-E INSULATING GLASS Type: Low-E Tinted Insulating Glass. Warm Bronze color, low-reflective glass outdoor appearance. “Solarbronze ®” + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

46%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.44

0.50

8%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Solarbronze” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 400 (Sputtered) Coated on third surface (3).

Type: Low-E Tinted Insulating Glass. Cool Gray color, low-reflective glass outdoor appearance. “Solargray ®” + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

38%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.38

0.44

7%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Solargray” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 400 (Sputtered) Coated on third surface (3).

Type: Low-E Tinted Insulating Glass. Gray with Warm Bronze undertone color, low-reflective glass appearance. “Optigray ®” 23 + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

20%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.23

0.26

5%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Optigray” 23 Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 400 (Sputtered) Coated on third surface (3).

Type: Low-E Tinted Insulating Glass. Dark Gray color, low-reflective glass outdoor appearance. “Graylite ®” + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

12%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.26

0.30

5%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Graylite” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 400 (Sputtered) Coated on third surface (3).

15


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 16

LOW-E INSULATING GLASS Type: Low-E Tinted Insulating Glass. Sky Blue color, low-reflective glass outdoor appearance. “Solarblue™” + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

48%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.42

0.49

8%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Solarblue” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 400 (Sputtered) Coated on third surface (3).

Type: Low-E Tinted Insulating Glass. Dark Blue color, low-reflective glass outdoor appearance. “Pacifica™” + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

37%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.29

0.34

7%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Pacifica” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass “Sungate” 400 (Sputtered) Coated on third surface (3).

Type: Low-E Clear Insulating Glass. Clear color, low-reflective glass outdoor appearance. “Solarban ®” 60 (2) Clear + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

70%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.38

0.44

11%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) Clear Glass, “Solarban” 60 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass.

Type: Ultra-Clear Low-E Insulating Glass. Ultra-Clear, low-reflective glass outdoor appearance. “Solarban ®” 60 (2) “Starphire ®” + “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

74%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.40

0.46

11%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Starphire” Glass, “Solarban” 60 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Float Glass.

16


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 17

LOW-E INSULATING GLASS Type: Low-E Tinted Insulating Glass. Emerald Green color, low-reflective glass outdoor appearance. “Solarban ®” 60 (2) “Atlantica™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

54%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.27

0.31

8%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Atlantica” Glass, “Solarban” 60 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Low-E Tinted Insulating Glass. Aquamarine color, low-reflective glass outdoor appearance. “Solarban ®” 60 (2) “Azuria™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

54%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.28

0.32

8%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Azuria” Glass, “Solarban” 60 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Low-E Tinted Insulating Glass. Aqua-Green color, low-reflective glass outdoor appearance. “Solarban ®” 60 (2) “Caribia ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

54%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.27

0.31

8%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Caribia” Glass, “Solarban” 60 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Low-E Tinted Insulating Glass. Cool Gray color, low-reflective glass outdoor appearance. “Solarban ®” 60 (2) “Solargray ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

35%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.24

0.28

6%

0.29

0.27

®

Insulating Unit Construction: 1/4 inch (6mm) “Solargray ” Glass, “Solarban” 60 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

17


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 18

LOW-E INSULATING GLASS Type: Low-E Tinted Insulating Glass. Light-Green color, low-reflective glass outdoor appearance. “Solarban ®” 60 (2) “Solexia™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

61%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.42

0.36

11%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Solexia” Glass, “Solarban” 60 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Low-E Tinted Insulating Glass. Warm bronze color, low-reflective glass outdoor appearance. “Solarban ®” 60 (2) “Solarbronze ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

42%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.27

0.31

7%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Solarbronze” Glass, “Solarban” 60 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Low-E Tinted Insulating Glass. Sky Blue color, low-reflective glass outdoor appearance. “Solarban ®” 60 (2) “Solarblue™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

45%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.28

0.32

7%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Solarblue” Glass, “Solarban” 60 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Low-E Tinted Insulating Glass. Dark Blue color, low-reflective glass outdoor appearance. “Solarban ®” 60 (2) “Pacifica™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

34%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.22

0.26

6%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Pacifica” Glass, “Solarban” 60 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

18


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 19

LOW-E INSULATING GLASS Type: Low-E Tinted Insulating Glass. Emerald Green color, low-reflective glass outdoor appearance. “Atlantica™” + “Solarban ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

53%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.30

0.35

9%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Atlantica” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass “Solarban” 60 Solar Control (Sputtered) on third surface (3).

Type: Low-E Tinted Insulating Glass. Aquamarine color, low-reflective glass outdoor appearance. “Azuria™” + “Solarban ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

54%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.31

0.36

9%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Azuria” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass “Solarban” 60 Solar Control (Sputtered) on third surface (3).

Type: Low-E Tinted Insulating Glass. Aqua-Green color, low-reflective glass outdoor appearance. “Caribia ®” + “Solarban ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

54%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.31

0.35

9%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Caribia” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass “Solarban” 60 Solar Control (Sputtered) on third surface (3).

Type: Low-E Tinted Insulating Glass. Dark Gray color, low-reflective glass outdoor appearance. “Graylite ®” + “Solarban ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

11%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.17

0.20

5%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Graylite” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass “Solarban” 60 Solar Control (Sputtered) on third surface (3).

19


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 20

LOW-E INSULATING GLASS Type: Low-E Tinted Insulating Glass. Gray with Warm Bronze undertone color, low-reflective glass outdoor appearance. “Optigray ®” 23 + “Solarban ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

18%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.18

0.21

5%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Optigray” 23 Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass “Solarban” 60 Solar Control (Sputtered) on third surface (3).

Type: Low-E Tinted Insulating Glass. Warm Bronze color, low-reflective glass outdoor appearance. “Solarbronze ®” + “Solarban ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

42%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.31

0.36

7%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Solarbronze” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass “Solarban” 60 Solar Control (Sputtered) on third surface (3).

Type: Low-E Tinted Insulating Glass. Cool Gray color, low-reflective glass outdoor appearance. “Solargray ®” + “Solarban ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

35%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.28

0.32

7%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Solargray” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass “Solarban” 60 Solar Control (Sputtered) on third surface (3).

Type: Low-E Tinted Insulating Glass. Light Green color, low-reflective glass outdoor appearance. “Solexia™” + “Solarban ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

61%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.36

0.42

11%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Solexia” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass “Solarban” 60 Solar Control (Sputtered) on third surface (3).

20


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 21

LOW-E INSULATING GLASS Type: Low-E Tinted Insulating Glass. Sky Blue color, low-reflective glass outdoor appearance. “Solarblue™” + “Solarban ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

45%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.32

0.37

8%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Solarblue” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass “Solarban” 60 Solar Control (Sputtered) on third surface (3).

Type: Low-E Tinted Insulating Glass. Dark Blue color, low-reflective glass outdoor appearance. “Pacifica™” + “Solarban ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

34%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.25

0.29

6%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Pacifica” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass “Solarban” 60 Solar Control (Sputtered) on third surface (3).

Type: Low-E Insulating Glass. Steel Blue-Gray, low-reflective glass outdoor appearance. “Solarban ®” z50 (2) “Optiblue ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

51%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.31

0.36

8%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Optiblue” (tinted) Float Glass, “Solarban” z50 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Low-E Insulating Glass. Deep Steel Blue-Gray, low-reflective glass outdoor appearance. “Solarban ®” z50 (2) “Optiblue ®” + “Optiblue ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

37%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.31

0.35

7%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Optiblue” (tinted) Float Glass, “Solarban” z50 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Optiblue” Float Glass.

21


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 22

LOW-E INSULATING GLASS Type: Low-E Tinted Insulating Glass. Glacial Blue, low-reflective glass outdoor appearance. “Azuria™” + “Solarban ®” z50 (3) “Optiblue ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

39%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.30

0.35

8%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Azuria” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Optiblue” Glass, “Solarban” z50 Solar Control (Sputtered) on third surface (3).

Type: Low-E Tinted Insulating Glass. Spruce Green, low-reflective glass outdoor appearance. “Atlantica™” + “Solarban ®” z50 (3) “Optiblue ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

39%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.30

0.34

8%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Atlantica” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Optiblue” Glass, “Solarban” z50 Solar Control (Sputtered) on third surface (3).

Type: Low-E Tinted Insulating Glass. Soft Teal, low-reflective glass outdoor appearance. “Caribia ®” + “Solarban ®” z50 (3) “Optiblue ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

39%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.30

0.34

8%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Caribia” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Optiblue” Glass, “Solarban” z50 Solar Control (Sputtered) on third surface (3).

Type: Low-E Insulating Glass. Light Blue-Gray, low-reflective glass outdoor appearance. “Optiblue ®”+ “Solarban ®” z50 (3) “Optiblue ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

37%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.36

0.42

8%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Optiblue” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Optiblue” Glass, “Solarban” z50 Solar Control (Sputtered) on third surface (3).

22


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 23

LOW-E INSULATING GLASS Type: Low-E Tinted Insulating Glass. Blue Grass Gray, low-reflective glass outdoor appearance. “Solexia™” + “Solarban ®” z50 (3) “Optiblue ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

44%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.35

0.41

10%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Solexia” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Optiblue” Glass, “Solarban” z50 Solar Control (Sputtered) on third surface (3).

Type: Low-E Tinted Insulating Glass. Warm Bronze, low-reflective glass outdoor appearance. “Solarbronze ®” + “Solarban ®” z50 (3) “Optiblue®” by PPG Industries, Inc. Performance Values Visible Light Transmission

30%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.31

0.35

7%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Solarbronze” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Optiblue” Glass, “Solarban” z50 Solar Control (Sputtered) on third surface (3).

Type: Low-E Tinted Insulating Glass. Dark Gray, low-reflective glass outdoor appearance. “Solargray ®” + “Solarban ®” z50 (3) “Optiblue ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

25%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.28

0.32

6%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Solargray” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Optiblue” Glass, “Solarban” z50 Solar Control (Sputtered) on third surface (3).

Type: Low-E Tinted Insulating Glass. Steel Blue color, low-reflective glass outdoor appearance. “Solarblue™” + “Solarban ®” z50 (3) “Optiblue ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

32%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.31

0.36

7%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Solarblue” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Optiblue” (tinted) Float Glass, “Solarban” z50 Solar Control (Sputtered) Coated on third surface (3).

23


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 24

LOW-E INSULATING GLASS Type: Low-E Tinted Insulating Glass. Rich Cobalt Blue color, low-reflective glass outdoor appearance. “Pacifica™” + “Solarban ®” z50 (3) “Optiblue ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

25%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.24

0.28

6%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Pacifica” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Optiblue” (tinted) Float Glass, “Solarban” z50 Solar Control (Sputtered) Coated on third surface (3).

Type: Low-E Clear Insulating Glass. Clear, low-reflective glass outdoor appearance. “Solarban ®” 70XL (2) “Starphire ®” + “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

66%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.27

0.32

12%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Starphire” Glass, “Solarban” 70XL Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass.

Type: Low-E Clear Insulating Glass. Clear, low-reflective glass outdoor appearance. “Solarban ®” 70XL (2) “Starphire ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

64%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.27

0.32

12%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Starphire” Glass, “Solarban” 70XL Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Glass.

Type: Low-E Tinted Insulating Glass. Emerald Green color, low-reflective glass outdoor appearance. “Solarban ®” 70XL (2) “Atlantica™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

48%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.23

0.26

9%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Atlantica” Glass, “Solarban” 70XL Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

24


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 25

LOW-E INSULATING GLASS Type: Low-E Tinted Insulating Glass. Aquamarine color, low-reflective glass outdoor appearance. “Solarban ®” 70XL (2) “Azuria™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

48%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.23

0.27

9%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Azuria” Glass, “Solarban” 70XL Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Low-E Tinted Insulating Glass. Aqua-Green color, low-reflective glass outdoor appearance. “Solarban ®” 70XL (2) “Caribia ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

48%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.23

0.27

9%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Caribia” Glass, “Solarban” 70XL Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Low-E Tinted Insulating Glass. Cool Gray color, low-reflective glass outdoor appearance. “Solarban ®” 70XL (2) “Solargray ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

31%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.19

0.22

7%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Solargray” Glass, “Solarban” 70XL Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Low-E Tinted Insulating Glass. Light-Green color, low-reflective glass outdoor appearance. “Solarban ®” 70XL (2) “Solexia™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

54%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.25

0.29

10%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Solexia” Glass, “Solarban” 70XL Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

25


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 26

LOW-E INSULATING GLASS Type: Low-E Tinted Insulating Glass. Warm Bronze color, low-reflective glass outdoor appearance. “Solarban ®” 70XL (2) “Solarbronze ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

37%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.20

0.23

7%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Solarbronze” Glass, “Solarban” 70XL Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Low-E Tinted Insulating Glass. Sky Blue color, low-reflective glass outdoor appearance. “Solarban ®” 70XL (2) “Solarblue™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

40%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.21

0.25

7%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Solarblue” Glass, “Solarban” 70XL Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Low-E Tinted Insulating Glass. Dark Blue color, low-reflective glass outdoor appearance. “Solarban ®” 70XL (2) “Pacifica™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

30%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.18

0.21

6%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Pacifica” Glass, “Solarban” 70XL Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Low-E Tinted Insulating Glass. Emerald Green, low-reflective glass outdoor appearance. “Solexia™” + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

56%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.32

0.37

11%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Solexia” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

26


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 27

LOW-E INSULATING GLASS Type: Low-E Tinted Insulating Glass. Emerald Green, low-reflective glass outdoor appearance. “Atlantica™” + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

49%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.28

0.32

10%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Atlantica” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

Type: Low-E Tinted Insulating Glass. Aqua Green, low-reflective glass outdoor appearance. “Caribia ®” + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

49%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.28

0.32

9%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Caribia” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

Type: Low-E Tinted Insulating Glass. Aqua Blue, low-reflective glass outdoor appearance. “Azuria™” + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

49%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.29

0.33

10%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Azuria” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

Type: Low-E Tinted Insulating Glass. Warm Bronze, low-reflective glass outdoor appearance. “Solarbronze ®” + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

38%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.26

0.30

8%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Solarbronze” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

27


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 28

LOW-E INSULATING GLASS Type: Low-E Tinted Insulating Glass. Cool Gray, low-reflective glass outdoor appearance. “Solargray ®” + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

32%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.24

0.27

7%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Solargray” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

Type: Low-E Tinted Insulating Glass. Dark Gray with Warm Bronze undertone, low-reflective glass outdoor appearance. “Optigray ®” 23 + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

17%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.16

0.19

5%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Optigray” 23 Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

Type: Low-E Tinted Insulating Glass. Dark Cool Gray, low-reflective glass outdoor appearance. “Graylite ®” + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

10%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.14

0.16

5%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Graylite” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

Type: Low-E Tinted Insulating Glass. Sky Blue color, low-reflective glass outdoor appearance. “Solarblue™” + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values 41%

0.27

0.32

8%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Solarblue” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

Type: Low-E Tinted Insulating Glass. Dark Blue color, low-reflective glass outdoor appearance. “Pacifica™” + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values 31%

0.22

0.26

6%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Pacifica” Glass + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

28


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 29

REFLECTIVE INSULATING GLASS Type: Reflective Tinted Insulating Glass. Subtly Reflective Aqua Blue outdoor appearance. “Vistacool ™” (2) “Azuria ™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

47%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.34

0.39

21%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Azuria” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Reflective Tinted Insulating Glass. Subtly Reflective Dark Blue outdoor appearance. “Vistacool ™” (2) “Pacifica ™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

29%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.31

0.37

11%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Pacifica” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Reflective Tinted Insulating Glass. Subtly Reflective Aqua Green outdoor appearance. “Vistacool ™” (2) “Caribia ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

47%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.34

0.39

21%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Caribia” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Reflective Tinted Insulating Glass. Subtly Reflective Gray outdoor appearance. “Vistacool ™” (2) “Solargray ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

31%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.40

0.47

17%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Solargray” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

29


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 30

REFLECTIVE INSULATING GLASS Type: Reflective Tinted Solar Control Low-E Insulating Glass. Natural Green Metallic outdoor appearance. “Solarcool ®” (1) “Solexia™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

27%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.28

0.32

37%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Solarcool (1) Solexia” Glass, “Solarcool” (Pyrolitic) on first surface (1) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Reflective Tinted Insulating Glass. Light Green Metallic outdoor appearance. “Solarcool ®” (2) “Solexia™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

27%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.31

0.36

24%

0.48

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Solarcool (2) Solexia” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Reflective Tinted Solar Control Low-E Insulating Glass. Warm Green Metallic outdoor appearance. “Solarcool ®” (1) “Caribia ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

23%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.22

0.25

37%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Solarcool (1) Caribia” Glass, “Solarcool” (Pyrolitic) on first surface (1) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Reflective Tinted Insulating Glass. Warm Green Metallic outdoor appearance. “Solarcool ®” (2) “Caribia ®” + Clear. Performance Values Visible Light Transmission

24%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.25

0.30

19%

0.48

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Solarcool (2) Caribia” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

30


10584 Specifications.qxd:_

7/9/10

11:32 AM

Page 31

REFLECTIVE INSULATING GLASS Type: Reflective Tinted Solar Control Low-E Insulating Glass. Dark Blue Metallic outdoor appearance. “Solarcool ®” (1) “Pacifica ™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

14%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.21

0.24

36%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Solarcool (1) Pacifica” Glass, “Solarcool” (Pyrolitic) on first surface (1) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Reflective Tinted Insulating Glass. Dark Blue Metallic outdoor appearance. “Solarcool ®” (2) “Pacifica ™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

15%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.25

0.29

10%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Solarcool (2) Pacifica” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Reflective Tinted Solar Control Low-E Insulating Glass. Green Metallic outdoor appearance. “Solarcool ®” (1) “Azuria™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

23%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.21

0.25

37%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Solarcool (1) Azuria” Glass, “Solarcool” (Pyrolitic) on first surface (1) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Reflective Tinted Insulating Glass. Dark Blue/Green Metallic outdoor appearance. “Solarcool ®” (2) “Azuria™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

24%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.25

0.29

20%

0.48

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Solarcool (2) Azuria” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

31


10584 Specifications.qxd:_

7/9/10

11:33 AM

Page 32

REFLECTIVE INSULATING GLASS Type: Reflective Tinted Solar Control Low-E Insulating Glass. Bronze Metallic outdoor appearance. “Solarcool ®” (1) “Solarbronze ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

18%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.31

0.35

37%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Solarcool (1) Solarbronze” Glass, “Solarcool” (Pyrolitic) on first surface (1) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Reflective Tinted Insulating Glass. Bronze Metallic outdoor appearance. “Solarcool ®” (2) “Solarbronze ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

19%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.34

0.40

14%

0.48

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Solarcool (2) Solarbronze” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Reflective Tinted Solar Control Low-E Insulating Glass. Sky Blue Metallic outdoor appearance. “Solarcool ®” (1) “Solarblue™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

19%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.28

0.33

37%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Solarcool (1) Solarblue” Glass, “Solarcool” (Pyrolitic) on first surface (1) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Reflective Tinted Insulating Glass. Sky Blue Metallic outdoor appearance. “Solarcool ®” (2) “Solarblue™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

20%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.32

0.37

15%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Solarcool (2) Solarblue” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

32


10584 Specifications.qxd:_

7/9/10

11:33 AM

Page 33

REFLECTIVE INSULATING GLASS Type: Reflective Tinted Solar Control Low-E Insulating Glass. Gray Metallic outdoor appearance. “Solarcool ®” (1) “Solargray ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

15%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.27

0.32

37%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Solarcool (1) Solargray” Glass, “Solarcool” (Pyrolitic) on first surface (1) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Reflective Tinted Insulating Glass. Gray Metallic outdoor appearance. “Solarcool ®” (2) “Solargray ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

16%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.31

0.36

11%

0.48

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Solarcool (2) Solargray” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Reflective Tinted Solar Control Low-E Insulating Glass. Dark Gray Metallic outdoor appearance. “Solarcool ®” (1) “Graylite ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

3%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.14

0.17

36%

0.47

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Solarcool (1) Graylite” Glass, “Solarcool” (Pyrolitic) on first surface (1) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Reflective Tinted Insulating Glass. Dark Gray Metallic outdoor appearance. “Solarcool ®” (2) “Graylite ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

3%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.19

0.22

5%

0.48

0.50

Insulating Unit Construction: 1/4 inch (6mm) “Solarcool (2) Graylite” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

33


10584 Specifications.qxd:_

7/9/10

11:33 AM

Page 34

REFLECTIVE LOW-E INSULATING GLASS Type: Reflective Tinted Low-E Insulating Glass. Subtly Reflective Aqua Blue outdoor appearance. “Vistacool ™” (2) “Azuria ™” + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

44%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.29

0.34

22%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Azuria” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 500 (Pyrolitic) on third surface (3).

Type: Reflective Tinted Low-E Insulating Glass. Subtly Reflective Aqua Green outdoor appearance. “Vistacool ™” (2) “Caribia ®” + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

44%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.29

0.34

22%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Caribia” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 500 (Pyrolitic) on third surface (3).

Type: Reflective Tinted Low-E Insulating Glass. Subtly Reflective Gray outdoor appearance. “Vistacool ™” (2) “Solargray ®” + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

29%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.35

0.41

12%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Solargray” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 500 (Pyrolitic) on third surface (3).

Type: Reflective Tinted Low-E Insulating Glass. Subtly Reflective Dark Blue outdoor appearance. “Vistacool ™” (2) “Pacifica ™” + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

27%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.27

0.31

11%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Pacifica” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 500 (Pyrolitic) on third surface (3).

34


10584 Specifications.qxd:_

7/9/10

11:33 AM

Page 35

REFLECTIVE LOW-E INSULATING GLASS Type: Reflective Tinted Low-E Insulating Glass. Light Green Metallic outdoor appearance. “Solarcool ®” (2) “Solexia™” + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

25%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.26

0.31

24%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Solexia” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 500 (Pyrolitic) on third surface (3).

Type: Reflective Tinted Low-E Insulating Glass. Aqua-Green Metallic outdoor appearance. “Solarcool ®” (2) “Caribia ®” + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

22%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.20

0.24

19%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Caribia” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 500 (Pyrolitic) on third surface (3).

Type: Reflective Tinted Low-E Insulating Glass. Green Metallic outdoor appearance. “Solarcool ®” (2) “Azuria™” + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

22%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.20

0.23

20%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Azuria” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 500 (Pyrolitic) on third surface (3).

Type: Reflective Tinted Low-E Insulating Glass. Bronze Metallic outdoor appearance. “Solarcool ®” (2) “Solarbronze ®” + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

18%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.29

0.34

14%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Solarbronze” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 500 (Pyrolitic) on third surface (3).

35


10584 Specifications.qxd:_

7/9/10

11:33 AM

Page 36

REFLECTIVE LOW-E INSULATING GLASS Type: Reflective Tinted Low-E Insulating Glass. Cool Gray Metallic outdoor appearance. “Solarcool ®” (2) “Solargray ®” + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

15%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.26

0.30

11%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Solargray” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 500 (Pyrolitic) on third surface (3).

Type: Reflective Tinted Low-E Insulating Glass. Sky Blue Metallic outdoor appearance. “Solarcool ®” (2) “Solarblue™” + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

18%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.27

0.32

15%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Solarblue” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 500 (Pyrolitic) on third surface (3).

Type: Reflective Tinted Low-E Insulating Glass. Dark Blue Metallic outdoor appearance. “Solarcool ®” (2) “Pacifica ™” + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

14%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.20

0.23

10%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Pacifica” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 500 (Pyrolitic) on third surface (3).

Type: Reflective Tinted Low-E Insulating Glass. Dark Gray Metallic outdoor appearance. “Solarcool ®” (2) “Graylite ®” + “Sungate ®” 500 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

3%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.14

0.25

5%

0.35

0.35

Insulating Unit Construction: 1/4 inch (6mm) “Graylite” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 500 (Pyrolitic) on third surface (3).

36


10584 Specifications.qxd:_

7/9/10

11:33 AM

Page 37

REFLECTIVE LOW-E INSULATING GLASS Type: Reflective Tinted Low-E Insulating Glass. Subtly Reflective Aqua Blue outdoor appearance. “Vistacool ™” (2) “Azuria ™” + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

46%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.28

0.33

21%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Azuria” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 400 (Sputtered) on third surface (3).

Type: Reflective Tinted Low-E Insulating Glass. Subtly Reflective Aqua Green outdoor appearance. “Vistacool ™” (2) “Caribia ®” + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

45%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.28

0.33

20%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Caribia” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 400 (Sputtered) on third surface (3).

Type: Reflective Tinted Low-E Insulating Glass. Subtly Reflective Gray outdoor appearance. “Vistacool ™” (2) “Solargray ®” + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

30%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.33

0.38

11%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Solargray” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 400 (Sputtered) on third surface (3).

Type: Reflective Tinted Low-E Insulating Glass. Subtly Reflective Gray outdoor appearance. “Vistacool ™” (2) “Pacifica ™” + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

28%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.25

0.29

11%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Pacifica” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 400 (Sputtered) on third surface (3).

37


10584 Specifications.qxd:_

7/9/10

11:33 AM

Page 38

REFLECTIVE LOW-E INSULATING GLASS Type: Reflective Tinted Low-E Insulating Glass. Light Green Metallic outdoor appearance. “Solarcool ®” (2) “Solexia™” + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

26%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.24

0.28

24%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Solexia” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 400 (Sputtered) on third surface (3).

Type: Reflective Tinted Low-E Insulating Glass. Aqua-Green Metallic outdoor appearance. “Solarcool ®” (2) “Caribia ®” + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

23%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.19

0.22

19%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Caribia” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 400 (Sputtered) on third surface (3).

Type: Reflective Tinted Low-E Insulating Glass. Green Metallic outdoor appearance. “Solarcool ®” (2) “Azuria™” + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

23%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.19

0.22

19%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Azuria” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 400 (Sputtered) on third surface (3).

Type: Reflective Tinted Low-E Insulating Glass. Bronze Metallic outdoor appearance. “Solarcool ®” (2) “Solarbronze ®” + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

18%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.26

0.31

14%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Solarbronze” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 400 (Sputtered) on third surface (3).

38


10584 Specifications.qxd:_

7/9/10

11:33 AM

Page 39

REFLECTIVE LOW-E INSULATING GLASS Type: Reflective Tinted Low-E Insulating Glass. Cool Gray Metallic outdoor appearance. “Solarcool ®” (2) “Solargray ®” + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

15%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.24

0.27

11%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Solargray” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 400 (Sputtered) on third surface (3).

Type: Reflective Tinted Low-E Insulating Glass. Sky Blue Metallic outdoor appearance. “Solarcool ®” (2) “Solarblue™” + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

19%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.25

0.29

15%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Solarblue” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 400 (Sputtered) on third surface (3).

Type: Reflective Tinted Low-E Insulating Glass. Dark Blue Metallic outdoor appearance. “Solarcool ®” (2) “Pacifica ™” + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

14%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.18

0.21

10%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Pacifica” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 400 (Sputtered) on third surface (3).

Type: Reflective Tinted Low-E Insulating Glass. Dark Gray Metallic outdoor appearance. “Solarcool ®” (2) “Graylite ®” + “Sungate ®” 400 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

3%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.12

0.14

5%

0.32

0.31

Insulating Unit Construction: 1/4 inch (6mm) “Graylite” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Sungate” 400 (Sputtered) on third surface (3).

39


10584 Specifications.qxd:_

7/9/10

11:33 AM

Page 40

REFLECTIVE LOW-E INSULATING GLASS Type: Solar Control Low-E Clear Insulating Glass. Neutral Steel Metallic outdoor appearance. “Solarban ®” 80 (2) Clear + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

48%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.24

0.28

33%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) Clear Glass, “Solarban” 80 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Solar Control Low-E Clear Insulating Glass. Green-Gray Metallic outdoor appearance. “Solarban ®” 80 (2) Clear + “Optiblue ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

34%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.23

0.27

32%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) Clear Glass, “Solarban” 80 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Optiblue” (tinted) Float Glass.

Type: Solar Control Low-E Clear Insulating Glass. Steely Blue-Green Metallic outdoor appearance. “Solarban ®” 80 (2) “Optiblue ®” + Clear by PPG Industries, Inc Performance Values Visible Light Transmission

34%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.20

0.23

19%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Optiblue” (tinted) Float Glass, “Solarban” 80 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Solar Control Low-E Clear Insulating Glass. Deep Steel Blue Metallic outdoor appearance. “Solarban ®” 80 (2) “Optiblue ®” + “Optiblue ®” by PPG Industries, Inc Performance Values Visible Light Transmission

25%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.20

0.23

19%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Optiblue” (tinted) Float Glass, “Solarban” 80 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Optiblue” Glass.

40


10584 Specifications.qxd:_

7/9/10

11:33 AM

Page 41

REFLECTIVE LOW-E INSULATING GLASS Type: Reflective Tinted Solar Control Low-E Insulating Glass. Subtly Reflective Aqua Blue outdoor appearance. “Vistacool ™” (2) “Azuria ™” + “Solarban ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

42%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.26

0.30

20%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Azuria” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Solarban” 60 Solar Control (Sputtered) on third surface (3).

Type: Reflective Tinted Solar Control Low-E Insulating Glass. Subtly Reflective Aqua Green outdoor appearance. “Vistacool ™” (2) “Caribia ®” + “Solarban ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

42%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.25

0.29

20%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Caribia” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Solarban” 60 Solar Control (Sputtered) on third surface (3).

Type: Reflective Tinted Solar Control Low-E Insulating Glass. Subtly Reflective Gray outdoor appearance. “Vistacool ™” (2) “Solargray ®” + “Solarban ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

27%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.24

0.28

11%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Solargray” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Solarban” 60 Solar Control (Sputtered) on third surface (3).

Type: Reflective Tinted Solar Control Low-E Insulating Glass. Subtly Reflective Dark Blue outdoor appearance. “Vistacool ™” (2) “Pacifica ™” + “Solarban ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

26%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.21

0.24

11%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Pacifica” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Solarban” 60 Solar Control (Sputtered) on third surface (3).

41


10584 Specifications.qxd:_

7/9/10

11:33 AM

Page 42

REFLECTIVE LOW-E INSULATING GLASS Type: Reflective Tinted Solar Control Low-E Insulating Glass. Natural Green Metallic outdoor appearance. “Solarcool ®” (2) “Solexia™” + “Solarban ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

24%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.19

0.22

24%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Solexia” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Solarban” 60 Solar Control (Sputtered) on third surface (3).

Type: Reflective Tinted Solar Control Low-E Insulating Glass. Warm Green Metallic outdoor appearance. “Solarcool ®” (2) “Caribia ®” + “Solarban ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

21%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.16

0.19

19%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Caribia” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Solarban” 60 Solar Control (Sputtered) on third surface (3).

Type: Reflective Tinted Solar Control Low-E Insulating Glass. Green Metallic outdoor appearance. “Solarcool ®” (2) “Azuria™” + “Solarban ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

21%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.16

0.19

19%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Azuria” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Solarban” 60 Solar Control (Sputtered) on third surface (3).

Type: Reflective Tinted Solar Control Low-E Insulating Glass. Bronze Metallic outdoor appearance. “Solarcool ®” (2) “Solarbronze ®” + “Solarcool ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

17%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.18

0.21

14%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Solarbronze” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Solarban” 60 Solar Control (Sputtered) on third surface (3).

42


10584 Specifications.qxd:_

7/9/10

11:33 AM

Page 43

REFLECTIVE LOW-E INSULATING GLASS Type: Reflective Tinted Solar Control Low-E Insulating Glass. Cool Gray Metallic outdoor appearance. “Solarcool ®” (2) “Solargray ®” + “Solarban ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

14%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.16

0.19

11%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Solargray” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Solarban” 60 Solar Control (Sputtered) on third surface (3).

Type: Reflective Tinted Solar Control Low-E Insulating Glass. Sky Blue Metallic outdoor appearance. “Solarcool ®” (2) “Solarblue™” + “Solarban ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

17%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.18

0.21

14%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Solarblue” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Solarban” 60 Solar Control (Sputtered) on third surface (3).

Type: Reflective Tinted Solar Control Low-E Insulating Glass. Dark Blue Metallic outdoor appearance. “Solarcool ®” (2) “Pacifica ™” + “Solarban ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

13%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.15

0.17

10%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Pacifica” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Solarban” 60 Solar Control (Sputtered) on third surface (3).

Type: Reflective Tinted Solar Control Low-E Insulating Glass. Dark Gray Metallic outdoor appearance. “Solarcool ®” (2) “Graylite ®” + “Solarban ®” 60 (3) Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

3%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.10

0.12

5%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Graylite” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass, Low-E Coating “Solarban” 60 Solar Control (Sputtered) on third surface (3).

43


10584 Specifications.qxd:_

7/9/10

11:33 AM

Page 44

REFLECTIVE LOW-E INSULATING GLASS Type: Reflective Tinted Solar Control Low-E Insulating Glass. Bright Blue outdoor appearance. “Vistacool ™” (2) “Azuria™” + “Solarban ®” z50 (3) “Optiblue®” by PPG Industries, Inc. Performance Values Visible Light Transmission

30%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.25

0.29

20%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Azuria” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Optiblue” Glass, Low-E Coating “Solarban” z50 Solar Control (Sputtered) on third surface (3).

Type: Reflective Tinted Solar Control Low-E Insulating Glass. Bright Medium Teal outdoor appearance. “Vistacool ™” (2) “Caribia ®” + “Solarban ®” z50 (3) “Optiblue ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

30%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.25

0.29

20%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Caribia” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Optiblue” Glass, Low-E Coating “Solarban” z50 Solar Control (Sputtered) on third surface (3).

Type: Reflective Tinted Solar Control Low-E Insulating Glass. Bright Dark Blue Granite outdoor appearance. “Vistacool ™” (2) “Solargray ®” + “Solarban ®” z50 (3) “Optiblue ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

20%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.24

0.27

11%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Solargray” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Optiblue” Glass, Low-E Coating “Solarban” z50 Solar Control (Sputtered) on third surface (3).

Type: Reflective Tinted Solar Control Low-E Insulating Glass. Bright Dark Blue Granite outdoor appearance. “Vistacool ™” (2) “Pacifica ™” + “Solarban ®” z50 (3) “Optiblue®” by PPG Industries, Inc. Performance Values Visible Light Transmission

19%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.21

0.24

11%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Pacifica” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Optiblue” Glass, Low-E Coating “Solarban” z50 Solar Control (Sputtered) on third surface (3).

44


10584 Specifications.qxd:_

7/9/10

11:33 AM

Page 45

REFLECTIVE LOW-E INSULATING GLASS Type: Subtly Reflective Solar Control Low-E Insulating Glass. Subtly Reflective Aqua-Blue outdoor appearance. “Vistacool ™” (2) “Azuria ™” + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

38%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.24

0.27

21%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Azuria” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, Low-E Coating “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

Type: Subtly Reflective Solar Control Low-E Insulating Glass. Subtly Reflective Aqua Green outdoor appearance. “Vistacool ™” (2) “Caribia ®” + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

38%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.23

0.27

20%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Caribia” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, Low-E Coating “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

Type: Subtly Reflective Solar Control Low-E Insulating Glass. Subtly Reflective Gray outdoor appearance. “Vistacool ™” (2) “Solargray ®” + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

25%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.20

0.23

11%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Solargray” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, Low-E Coating “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

Type: Subtly Reflective Solar Control Low-E Insulating Glass. Subtly Reflective Dark Blue outdoor appearance. “Vistacool ™” (2) “Pacifica ™” + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

24%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.19

0.22

11%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Pacifica” Glass, “Vistacool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, Low-E Coating “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

45


10584 Specifications.qxd:_

7/9/10

11:33 AM

Page 46

REFLECTIVE LOW-E INSULATING GLASS Type: Reflective Solar Control Low-E Insulating Glass. Natural Green Metallic outdoor appearance. “Solarcool ®” (2) “Solexia™” + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

22%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.17

0.20

24%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Solexia” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, Low-E Coating “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

Type: Reflective Solar Control Low-E Insulating Glass. Warm Green Metallic outdoor appearance. “Solarcool ®” (2) “Caribia ®” + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

19%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.15

0.18

19%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Caribia” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, Low-E Coating “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

Type: Reflective Solar Control Low-E Insulating Glass. Natural Green Metallic outdoor appearance. “Solarcool ®” (2) “Azuria™” + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

19%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.15

0.18

19%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Azuria” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, Low-E Coating “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

Type: Reflective Solar Control Low-E Insulating Glass. Bronze Metallic outdoor appearance. “Solarcool ®” (2) “Solarbronze ®” + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

15%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.15

0.17

14%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Solarbronze” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, Low-E Coating “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

46


10584 Specifications.qxd:_

7/9/10

11:33 AM

Page 47

REFLECTIVE LOW-E INSULATING GLASS Type: Reflective Solar Control Low-E Insulating Glass. Gray Metallic outdoor appearance. “Solarcool ®” (2) “Solargray ®” + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

13%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.14

0.16

11%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Solargray” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, Low-E Coating “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

Type: Reflective Solar Control Low-E Insulating Glass. Sky Blue Metallic outdoor appearance. “Solarcool ®” (2) “Solarblue™” + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

16%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.15

0.18

14%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Solarblue” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, Low-E Coating “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

Type: Reflective Solar Control Low-E Insulating Glass. Dark Blue Metallic outdoor appearance. “Solarcool ®” (2) “Pacifica ™” + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

12%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.13

0.15

10%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Pacifica” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, Low-E Coating “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

Type: Reflective Solar Control Low-E Insulating Glass. Gray Metallic outdoor appearance. “Solarcool ®” (2) “Graylite ®” + “Solarban ®” 70XL (3) “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

3%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.09

0.11

5%

0.28

0.26

Insulating Unit Construction: 1/4 inch (6mm) “Graylite” Glass, “Solarcool” (Pyrolitic) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Glass, Low-E Coating “Solarban” 70XL Solar Control (Sputtered) on third surface (3).

47


10584 Specifications.qxd:_

7/9/10

11:33 AM

Page 48

REFLECTIVE LOW-E INSULATING GLASS Low-E Clear Insulating Glass. Clear color, reflective glass outdoor appearance. “Solarban ®” R100 (2) Clear + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

42%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.23

0.27

32%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) Clear Glass, “Solarban” R100 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear (transparent) Float Glass.

Type: Ultra-Clear Low-E Insulating Glass. Ultra-Clear, reflective glass outdoor appearance. “Solarban ®” R100 (2) “Starphire ®” + “Starphire ®” by PPG Industries, Inc. Performance Values Visible Light Transmission

44%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.23

0.27

33%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Starphire” Glass, “Solarban” R100 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) “Starphire” Float Glass.

Type: Low-E Tinted Insulating Glass. Emerald Green color, reflective glass outdoor appearance. “Solarban ®” R100 (2) “Atlantica™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

31%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.19

0.22

20%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Atlantica” Glass, “Solarban” R100 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Low-E Tinted Insulating Glass. Aquamarine color, reflective glass outdoor appearance. “Solarban ®” R100 (2) “Azuria™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

32%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.19

0.22

21%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Azuria” Glass, “Solarban” R100 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

48


10584 Specifications.qxd:_

7/9/10

11:33 AM

Page 49

REFLECTIVE LOW-E INSULATING GLASS Type: Low-E Tinted Insulating Glass. Aqua-Green color, reflective glass outdoor appearance. “Solarban ®” R100 (2) “Caribia ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

32%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.19

0.22

20%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Caribia” Glass, “Solarban” R100 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Low-E Insulating Glass. Steel Blue-Gray, reflective outdoor appearance. “Solarban ®” R100 (2) “Optiblue ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

30%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.20

0.23

19%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Optiblue” (tinted) Float Glass, “Solarban” R100 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Low-E Tinted Insulating Glass. Cool Gray color, reflective glass outdoor appearance. “Solarban ®” R100 (2) “Solargray ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

21%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.17

0.19

12%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Solargray” Glass, “Solarban” R100 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Low-E Tinted Insulating Glass. Light-Green color, reflective glass outdoor appearance. “Solarban ®” R100 (2) “Solexia™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

36%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.21

0.24

25%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Solexia” Glass, “Solarban” R100 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

49


10584 Specifications.qxd:_

7/9/10

11:33 AM

Page 50

REFLECTIVE LOW-E INSULATING GLASS Type: Low-E Tinted Insulating Glass. Warm Bronze color, reflective glass outdoor appearance. “Solarban ®” R100 (2) “Solarbronze ®” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

25%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.18

0.21

15%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Solarbronze” Glass, “Solarban” R100 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Low-E Tinted Insulating Glass. Sky Blue color, reflective glass outdoor appearance. “Solarban ®” R100 (2) “Solarblue™” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

26%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.19

0.22

15%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Solarblue” Glass, “Solarban” R100 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

Type: Low-E Tinted Insulating Glass. Dark Blue color, reflective glass outdoor appearance. “Solarban ®” R100 (2) “Pacifica” + Clear by PPG Industries, Inc. Performance Values Visible Light Transmission

20%

SHGC

Shading Coefficient

Outdoor Visible Light Reflectance

U-Value Winter

U-Value Summer

0.16

0.19

11%

0.29

0.27

Insulating Unit Construction: 1/4 inch (6mm) “Pacifica” Glass, “Solarban” R100 Solar Control (Sputtered) on second surface (2) + 1/2 inch (13mm) air space + 1/4 inch (6mm) Clear Float Glass.

PART 3 EXECUTION 3.1

INSTALLATION A. Refer to Section 08800 – Glazing for installation requirements.

PART 4 END OF SECTION

50

Three-Part Architectural Glass Specifications  

Detailed specifications for PPG Architectural Glass.