Issuu on Google+


The Source of Quality For orders, returns, parts, or quotes, contact our Customer Service Department • All our customer service representatives have on-line access to prices and inventory information. • Parts available for 99% of our products. For repairs and technical assistance contact our Service Department • Our technical and product support department can assist you with difficult application problems and offer you trouble-shooting techniques.

Service and Quality THE PHASE II ADVANTAGE: Top Quality Products Phase II offers only top quality products. Each new product passes a quality control checklist. we make sure our products live up to the high quality standards you have come to expect. Free Technical Assistance Our customer service representatives can answer your questions about our products, offer advice and recommend the proper accessories to complete your requests. It’s easy to order Call toll-free 1-800-526-9087 Monday through Friday 8:30 AM - 5:30 PM (EST) 24-hour fax (201) 933-3801

New Accounts: Three (3) trade references and a bank reference are required to open an account. Visa, MasterCard, and Discover are accepted. If immediate delivery is required, please include a check with your order, allow for COD shipment or charge to credit card. Claims: Must be made within 5 days after receipt of merchandise. If it is a truck shipment, make sure the damage or short shipment is noted on the delivery receipt. Without proper notation, you accept it at your own risk. Returns: All returns must be authorized. Call (201) 933-6300 for authorization. Please state in your packing slip the reason for return. Return due to customer error is subject to a 10% re-stocking fee with a minimum of $5.00. To facilitate the issuance of credit, please have the date and the invoice number of your purchase order. We will either replace, refund, or extend full credit within 60 days of purchase, as long as you advise us promptly. Guarantee: Phase II unconditionally guarantees items purchased, against manufacturer defect. Liability: The value of the defective item(s) is the limit of our liability. All technical information has been supplied by the manufacturer for your convenience only. We do not warrant or represent that the merchandise complies with the provisions of any law—particularly the WalshHealey Public Contracts Act and the OSHA of 1970 and the regulations promulgated thereunder—unless the manufacturer so warrants. Dimensions may be changed without notice at the discretion of the manufacturer. Orders: We ship 98% of our orders within 24 hours.

Phase II Machine & Tool Inc. 283 Veterans Blvd. Carlstadt, NJ 07072-2708 Phone: (201) 933-6300 e-mail: Phase2@Comcast.net Web site: www.phase2plus.com We accept Visa, MasterCard and Discover Prices: F.O.B. New Jersey unless advised otherwise. Minimum order is $35 net. Terms: Net 30 days, unless otherwise agreed upon in writing.

Phase II not responsible for typographical errors.


2

QUICK CHANGE TOOL SETS Features Each set consists of one toolpost and 5 holders, one of each style, No.1, 2, 4, 7, & 10.

Piston Sets Stock No. 251-100 251-200 251-300 251-400

Swing 9-12" 10-15" 13-18" 14-20"

Price

Swing 9-12" 10-15" 13-18" 14-20" 17-48"

Price

$199 $230 $339 $495

Wedge Sets Stock No. 251-111 251-222 251-333 251-444 251-555

$249 $299 $49 $ 419 $550 $1350

QUICK CHANGE TOOL POSTS Two different styles—piston or wedge Both are precision engineered to assure repetitive accuracy. Advanced design provides built-in quick tool changing versatility with positive rigidity to meet the most exacting tolerances. Quickly and easily installed on an engine, bench, or turret lathe for a wide range of operations, from fine precise work to heavy duty cutting. Piston type posts are economical, while the wedge type posts are clearly ultra-precise. Both accept the toolholders and interchange with Aloris, Dorian, and DTM Tooling.

Wedge Style

Piston Style

Note: Base must be machined to fit your compound rest.

Stock No. 250-100 250-200 250-300 250-400

A 21⁄2" 3" 33⁄8" 4"

B 37⁄8" 45⁄8" 51⁄8" 61⁄4"

C 21⁄4" 23⁄4" 3" 35⁄8"

D 9 ⁄16" 5 ⁄8" 3 ⁄4" 7 ⁄8"

E 17⁄16" 15⁄8" 17⁄8" 21⁄8"

H 411⁄16" 59⁄16" 61⁄8" 7"

R 53⁄4" 75⁄16" 77⁄8" 9"

Swing 9-12" 10-15" 13-18" 14-20"

Price

250-111 250-222 250-333 250-444 250-555

21⁄2" 3" 31⁄2" 4" 5"

37⁄8" 45⁄8" 51⁄8" 61⁄4" 73⁄8"

21⁄4" 23⁄4" 3" 35⁄8" 45⁄8"

9

13⁄8" 19⁄16" 129⁄32" 21⁄8" 211⁄16"

411⁄16" 59⁄16" 61⁄8" 7" -

53⁄4" 75⁄16" 77⁄8" 9" -

9-12" 10-15" 13-18" 14-20" 17-48"

$153 $172

⁄16" ⁄8" 3 ⁄4" 7 ⁄8" 1" 5

$116 $132 $175 $290

$228 $336 $699


3

TURNING AND FACING HOLDERS Features Takes various sizes of bits. Turning and facing tools can be locked in together. Saves time and labor when changing operations. Stock No. A B C D Toolbit 15 1 7 3 250-101 ⁄16" ⁄2" ⁄16" 11⁄2" ⁄16" - 1⁄2" 1 5 1 3 1 250-201 1 ⁄8" ⁄8" ⁄2" 1 ⁄4" ⁄4" - 3⁄4" 7 3 5 1 1 250-301 1 ⁄16" ⁄4" ⁄8" 2 ⁄8" ⁄2" - 3⁄4" 11 3 1 1 250-401 1 ⁄16" 1" ⁄4" 2 ⁄2" ⁄2" - 1" 3 250-501 33⁄16" 11⁄4" 1" 31⁄8" ⁄4" - 11⁄4"

Price $28 $30 $41 $51 $109

BORING, TURNING AND FACING HOLDERS Features V-groove holds round shank boring bars and tools as well as square toolbits. Boring bar not included. Stock No. A B C D Toolbit Shank Price 15 1 7 3 7 250-102 ⁄16" ⁄2" ⁄16" 11⁄2" ⁄16" - 1⁄2" ⁄16" $29 1 5 1 3 1 5 1 250-202 1 ⁄8" ⁄8" ⁄2" 1 ⁄4" ⁄4" - ⁄8" ⁄2" $33 3 5 1 3 250-302 17⁄16" ⁄4" ⁄8" 21⁄8" ⁄2" -3⁄4" ⁄4" $43 3 1 13 250-402 111⁄16" 1" ⁄4" 21⁄2" ⁄2" - 1" ⁄16" $54 3 250-502 23⁄16" 11⁄4" 1" 31⁄8" ⁄4" - 11⁄4" 11⁄8" $115

HEAVY DUTY BORING BAR HOLDERS Features Equipped with a split bushing to accomodate a boring bar of a smaller diameter. It grips with extreme rigidity, cuts smoothly without chatter. StockNo. A B D D1 Price 3 3 5 250-104 ⁄4" 11⁄2" ⁄4" ⁄8" $43 7 3 250-204 ⁄8" 13⁄4" 1" ⁄4" $51 3 250-304 1" 2" 1" ⁄4" $61 250-404 11⁄4" 21⁄2" 11⁄4" 1" $75 250-504 19⁄16" 31⁄8" 11⁄2" 11⁄4" $145 250-141 250-241 250-341 250-441 250-541

7

⁄8" 1" 11⁄8" 13⁄8" 21⁄8"

13⁄4" 2" 21⁄4" 23⁄4" 31⁄2"

1" 11⁄4" 11⁄4" 11⁄2" 2"

3

⁄4" 1" 1" 11⁄4" 11⁄2"

$61 $67 $81 $97 $139


4

MORSE TAPER HOLDER Features Drills with carriage by using power feed instead of tailstock. Easily centered. For Nos. 2, 3, and 4 morse taper drill (not included). StockNo. 250-105 250-205 250-305 250-405 250-505 250-153 250-253 250-353 250-453 250-553

A ⁄4" 7 ⁄8" 1" 11⁄4" 19⁄16"

B 11⁄2" 13⁄4" 2" 21⁄2" 31⁄8"

Hole Size Price 2 MT $44 2 MT $46 3 MT $57 3 MT $75 4 MT $115

3

11⁄2" 13⁄4" 21⁄8" 23⁄8" 31⁄4"

3 MT 3 MT 4 MT 4MT 5MT

3

⁄4" ⁄8" 11⁄16" 13⁄16" 15⁄8" 7

$59 $62 $71 $86 $130

UNIVERSAL PARTING BLADE HOLDER Features For bevel as well as T-cut blades. Enables yo to cut-off close to chuck. Absence of vibration prevents breaking blades. Stock No. 250-107 250-207 250-307 250-407 250-507

A ⁄16" 1" 13⁄16" 17⁄16" 13⁄4" 13

B ⁄2" 11 ⁄16" 3 ⁄4" 7 ⁄8" 13⁄16" 1

C ⁄16" 3 ⁄16" 3 ⁄16" 1 ⁄4" 1 ⁄4" 3

D 11⁄2" 13⁄4" 2" 21⁄2" 33⁄4"

Blade HT 1 ⁄2" 11 ⁄16" 3 ⁄4" 7 ⁄8" 11⁄8"

Price $44 $46 $57 $75 $130

Please refer to page 36 for cut-off blades.

KNURLING, TURNING AND FACING HOLDERS Features For turning and facing as well as knurling. Supplied with a set of high-speed, precision-ground, lapped medium diamond knurls. Dimensions: 3⁄4” x 3⁄8” x 1⁄4”. Stock No. A B C E E1 Toolbit Price 7 1 13 250-110 ⁄8" 21⁄2" 19⁄16" ⁄2" ⁄32" 3⁄16" - 1⁄2" $53 5 3 5 1 1 250-210 1" 2 ⁄8" 1 ⁄4" ⁄8" ⁄2" ⁄4" - 5⁄8" $60 3 1 3 1 1 250-310 1 ⁄16" 3 ⁄8" 2" ⁄4" ⁄2" ⁄2" -3⁄4" $69 3 1 250-410 17⁄16" 33⁄4" 21⁄2" 1" ⁄4" ⁄2" - 1" $78 1 250-510 17⁄8" 41⁄2" 31⁄8" 11⁄4" 1" ⁄2" - 11⁄4" $159 Note: Uses American standard knurls.


5

THE MOST VERSATILE SYSTEM ON THE MARKET TODAY! Each Toolpost is fitted with a machineable T-slot nut to fit machines with T-slotted compound rests. Should the compound rest have an 8mm hole, simply remove the T-slot nut and bolt directly with installed bolt. If your machine has a 10mm hole, you can remove the 8mm bolt and the bushing inside the post and use the supplied 10mm bolt.

MICRO QUICK-CHANGE TOOL SYSTEM

Micro Tool Post

The Phase II Micro Quick Change Tool System combines precise Swiss jeweller workmanship with ultra accuracy in this versatile design. Accurate to within .0001". Micro set includes the post and one each of the 1, 2, 4, 6 and 7 holders.

Tool Post Stock No. 250-075

Lathe Swing 5”-8”

Base Width 11⁄2”

Body Bolt Height Diam 11⁄4” 8/10mm

Center Ht 9 ⁄32” - 23⁄32”

Price $85

Tool Holders Stock No.

Micro-1 Turning Holder

Base Thickness 5 250-077 Style #1 ⁄32" 5 250-079 Style #2 ⁄32" 7 250-081 Style #4 ⁄16" 5 250-083 Style #6 ⁄32" 250-085 Style #7 —

Set (post and 5 holders) 251-075

Length 11⁄2" 13⁄4" 21⁄4" 11⁄2" 11⁄2"

Width 5 ⁄8" — — 1" 5 ⁄8"

Toolbit 1 ⁄8" - 3⁄8" 1 ⁄8" - 3⁄8" 3 ⁄8" 1 ⁄8" - 3⁄8" P1-P1N

Price $30 $34 $39 $34 $40

$249

Please refer to page 36 for cutoff blades Micro-2 Turning & Boring Holder

Micro-4 Boring Bar Holder

Micro-7 Cutoff Holder Micro-6 Multi-Tool Holder


6

HOBBY SIZE QUICK CHANGE TOOL SYSTEM Features: • This is a scaled down version of our popular “Piston” style quick change tool system • Made from high quality, heat treated tool steel • Designed to fit the 5-8” swing machines . • Will fit the popular 7x10, 7x12 and 7x14 mini lathes, Prazi SD 300, Atlas/Craftsman and Emco Lathes • Comes supplied with a T-nut, 8mm and 10mm bolt for universal mounting to the compound rest. • Set contains; 1 tool post and 2 turning holders, 1 boring bar holder and 1 cutoff tool holder. TOOL POST Stock No. Lathe Swing

Base Width

Body Height

250-065

1-3/4”

1-1/2”

5-8”

HOBBY –1 TURNING TOOL HOLDER Stock No. Base Thickness Length 250-067

7/32”

2”

HOBBY-4 BORING BAR HOLDER Stock No. Base Thickness Length 250-069

1/2”

HOBBY-7 CUTOFF HOLDER Stock No. Base Thickness 250-071

1/2”

Bolt Diam

Tool Bit

8/10mm” 1/8-3/8 Width 1”

Center Ht

Price

1-1/8

$73

Tool bit 1/8-3/8”

Width

Tool bit

2”

1”

3/8”

Length

Width

Tool Bit

2”

1”

P1-P1N

COMPLETE SET 251-065 1 Post and 4 Tool Holders comprising 2pcs#1, 1pc #4 and 1pc #7.

$25

$25

$24

$160


7

5C SPIN INDEX STOCK NO. 225-204 Features

$79

• Hardened and precision-ground spindle • .0004” TIR spindle accuracy • Precision-ground 36-position index plate • Direct indexing in ten steps, graduated in 5-degree increments •For use on all milling machines, surface grinders, and inspection equipment • Approximate weight 18lbs

5C H/V COLLET INDEX STOCK NO. 225-205 Features

$285

• Utilizes 5C collets • Patented single lever action activates the indexing mechanism • Precision ground index plate has 24 indexing locations in fifteen degree increments, any of which can be masked for greater versatility • Spindle accuracy 0.0004" • Approximate weight: 35 lbs. • Spindle is 21⁄4—8 TPI

“The industry standard!” Without question the most versatile and most popular collet indexer sold in the world

Specifications Maximum variation Dividing spindle concentricity .0004" Cylinder center bore (per 1") concentricity .0004" Lateral offset of center slot of dividing spindle .0004" Center slot to dividing spindlee concentricity .0004" Spindle Center line parallelism .0004" Base to face squareness .0004"

Optional tailstock STOCK NO.: 240-003 • Height of center: Min: 3"; Max: 41⁄2" • Tilt angle: = +/- 11°

$139


8

4" TILTING INDEX SPACER STOCK NO. 225-001 Features

$345

• Perfect for small precision detail work on benchtop machines, full size mills, drills, engraving machines, jig borers, etc. • Micro dial for easy movement of chuck • 360° graduated ring • Thru hole goes all the way through indexer • Easy backlash adjustment • Tilting 0-90° via graduated ring and positive lock lever

Specifications • Chuck diameter: 4" • Thru hole diameter: .984" • Center Height: 2.75"

5C HORIZ/VERT COLLET HOLDER STOCK NO. 225-202 Features

$65

• Height: 33⁄4" • Base: 5" X 35⁄8" • Universally adaptable to drill presses, milling machines, surface grinders, etc. • Collet does not move up or down • Retains positive relation to base • Can be adjusted or changed without disturbing set-up • Cam lever opens and closes easily so collets can be changed quickly • Utilizes a cam lock and positive release


9

SUPER SPACER With 3-Jaw Adjustable Lathe Chuck

Features: • Precision made • Chuck completely adjustable to within .0005" TIR • For milling, drilling, jig boring, and many common shop applications. • 24-position hardened and ground index plate • Satin chrome graduation ring 360o and adjustable vernier plate ensure accurate reading to minutes • Clamping shoes lock spindle without affecting spindle alignment • Six masking plates for 2, 3, 4, 6, 8, and 12 divisions • Indexing accuracy: 25 seconds

Specifications: • Squareness (base to chuck): .0008" • Parallelism over face: .0004" • Concentricity of chuck: .0005" Stock No. Size Weight 225-006 6" 90 lbs. 225-008 8" 135 lbs.

Price $629 $750

Tailstocks Available. Refer to page 13

SUPER-DEX With 3-Jaw Adjustable Lathe Chuck

Features: • Chuck completely adjustable to within .0005" TIR • 24-position hardened and ground index plate (15o increments) with satin chrome dial, 360o graduated ring and adjustable 10-second vernier • Six masking plates for 2, 3, 4, 6, 8, and 12 divisions

Specifications: • Maximum individual spacing error: 25 seconds • Vernier reading: 10 seconds • Squareness (base to chuck): .0008" • Base parallelism: .0004" • Mounting flange concentricity: .0005" Stock No. Size 225-226 6" Includes 8” face plate 225-228 8" Includes 10” face plate

Weight 209 lbs.

Price

238 lbs.

$1150

$899


10

TILTING ROTARY TABLES Extremely accurate and solidly built for milling, boring as well as other machining operations. Precision 10 second vernier reading and inclinable reading in minutes provide the needed accuracy for most inspection applications. Completely sealed gears and heavy duty construction assure trouble-free usage. 90:1 gear ratio on both the 10" and 12" tables.

Special Design Features Include: • Table Tilts to 90 Degrees • Two Year Warranty • Extra Deep Coolant Channel • Dual Positive Action Locks • Satin Chrome Dials • Gear Ratio 90:1 • Low Profile • Ten (10) Second Vernier Reading • Gear Drive Immersed in Oil • Optional Dividing Plates and Tailstock • Accuracy: 45 seconds Maximum variation Specifications (inches/seconds)

Clamping Surface Flatness (concave) Cylindrical Center Bore Concentricity Taper Center Bore Concentricity Surface to Base Parallelism Surface to Angle Face Squareness Surface to Center Slot Squareness

0.0006” 0.0008” 0.0008” 0.0008” 0.0004” 0.0008”

optional

Dimensions for Tilting Rotary Table: Stock No.

222-410 222-412

Outer dia.

Ht.

Center Ht.

Base Dimensions

9.81 12.6

8.07 10.04

5.51 6.89

10.24B/12.2L 13.07B/14.96L

Width Locating of T-slot Key

0.47 0.55

0.55 0.71

Centering Hole

Center Taper Hole

Weight

Price

1.2 1.6

MT-3 MT-4

172 lbs. 293 lbs.

$1150 $1450

FOR GRAPHICS AND FULL SPECIFICATIONS OF TAILSTOCK AND DIVIDING PLATES, PLEASE REFER TO PAGE 12 Adjustable Tailstock for 10" Stock No: 240-001 $130

Adjustable Tailstock for 12" Stock No: 240-002 $105

Dividing Plates for 10" & 12" Stock No: 241-101 $95


11

HORIZONTAL & VERTICAL ROTARY TABLES

Two Year Warranty! Ultra-Precision! • High precision bearing surfaces insure ultra-smooth rotation. • Superior grade meehanite castings provide the ultimate rigidity. • All tables are precision ground to meet the most exacting requirements and are individually supplied with a Certificate of Inspection. • The engraved graduations are both crisp and clear, eliminating erroneous reading. • Low profile design minimizes machine capacity losses without sacrificing work load capacity. • T-slots are machined within accepted tolerances. • Worm gear is easily disengaged for free rotation. • Long life and continued accuracy is assured by a convenient adjustment to compensate for wear. • All parts are strategically positioned for easy access. • The one-piece worm and shaft are hobbed from a solid alloy steel. Maximum Specifications variation (inches/seconds) Clamping Surface Flatness (Concave) 0.0006” Cylinder Center Bore Concentricity 0.0008” Taper Center Bore Concentricity 0.0008” Surface to Base Parallelism 0.0008” Surface to Angle Face Squareness 0.0004” Surface to Center Slot Squareness 0.0008”

Slot configurations: 4” — 4 slots 6” — 4 slots 8” — 4 slots 10” — 6 slots 12” — 6 slots 16” — 6 slots

221-304 with 72:1 gear ratio, pictured FOR GRAPHICS AND FULL SPECIFICATIONS OF TAILSTOCK AND DIVIDING PLATES, PLEASE REFER TO PAGE 12

Special Design Features Include: • Two Year Warranty • Extra Deep Coolant Channel • Dual Positive Action Lock • Graduated 360o • Low Profile • Ten (10) Second Vernier Reading • Gear Drive Immersed in Oil • Optional Dividing Plates and Tailstock • Gear Ratio — 72:1 for 4”, 90:1 for 6” thru 16”

Dimensions for Horizontal & Vertical Rotary Table: Stock No. 221-304 221-306 221-308 221-310 221-312 221-316

Dia. 4” 6" 8" 10" 12" 16"

A B C D 4.92 4.92 .394 .394 9.53 7.72 .472 6.296 11.200 9.400 .650 7.872 12.900 11.300 .552 9.800 16.125 14.250 .710 125⁄8 20.67 17.72 .71 15.75

E F G H J K L M 2MT 4.92 8MM 2.76 2.76 .394 1.732 4.075 2 MT 7.32 .472 3.35 4.92 .47 3 5 3 MT 8.204 .570 3.944 5.985 .610 3.700 7.830 3 MT 9.960 .562 4.330 6.750 .630 4.100 8.625 4 MT 12.625 .725 4.750 8.250 .990 5.25 10.250 4 MT 16.75 .71 5.51 10.24 .63 7.087 13.27

N 1.890 3.23 3.880 4.175 4.640 5.71

T-slot O Width Wt. Price 1.181 .236 22 lbs. $285 1.46 .39 66 lbs. $349 1.900 .465 83 lbs. $379 1.900 .465 118 lbs. $419 1.900 .545 199 lbs. $729 2.76 .71 385 lbs. $1125


12

TAILSTOCKS Phase II brand tailstocks are designed for use with Phase II horizontal/ vertical rotary tables and super spacers The tailstock is used to hold and center shafts, cylinders and other workpieces for the machining of grooves, splines, flats, keyways, etc. The center is retractable for repeated operations and securely locked into position with clamp. Stock No. Description Cntr Ht Table/Spacers Range 240-001 8-10” Table 53⁄5”– 71⁄5” 240-002 12” Table 71⁄5”– 9” 240-004 4” Table 2.72”– 2.83” 240-005 6” Table 3.94” – 5.51” 240-006 16” Table 10.24” Fixed

Cntr Angle Weight Range -11° to +11° 33 lbs -11° to +11° 38 lbs -11° to +11° 18 lbs -11° to +11° 22 lbs n/a 45 lbs

Price $130 $150 $115 $125 $225

240-001

DIVIDING PLATES FOR 4” ROTARY TABLE STOCK NO. 241-103

$95

This dividing plate is used to divide one 360 degree table rotation into any division of 30’(minutes). The gear ratio of the 4” H/V rotary table is 72:1, so 72 rotations of the handwheel rotate the table one full rotation.

DIVIDING PLATES FOR 6”, 8” 10”, 12” AND 16” ROTARY TABLE STOCK NO. 241-101 STOCK NO. 241-102 (FOR 16”)

$95 $160

This dividing plate set is used to divide one 360 degree table rotation into 2-66 and all divisible by 2, 3 & 5 from 67-132 equal divisions.

240-006

240-004


13

LATHE CHUCK ADAPTER PLATES FOR PHASE II ROTARY TABLES Turn Your Phase II Rotary Table Into A Precision Indexing Super Spacer!

FITS TABLE SIZE

LATHE CHUCK SIZE

ADAPTOR PLATE

PRICE

221-354

4”

3”

221-354

$69.00

221-356

6”

5”

221-356

$79

221-358

8”

6”

221-358

$89

221-360

10”

8”

221-360

$99

221-362

12”

10”

221-362

$109

221-366

16”

12”

221-366

$119

STOCK NO.

PRECISION CROSS SLIDE TABLE STOCK NO. 260-520

$1295

Engineered and produced with Precision in mind, this cross slide table is perfect for the machinist that needs an accurate table with all the best features at a competitive price. Superbly crafted with complete attention to detail, this table far surpasses the standard crowd of tables now sold.

FEATURES: • Locks for precise location • Adjustable backlash • Fine crisp graduations • Heavy duty 360° swivel base

Specifications: Table Length: Table width Overall height Cross travel Axial travel Graduations T-slot size Max. load on center Weight:

17” 10” 6” +/- 5” from Center +/- 4” from Center .001” 5/8” 500 LBS 225 lbs


14

COMPOUND SLIDE TABLE STOCK NO.: 260-512

$135

A heavy, rugged slide used in all kinds of positioning, milling, drilling, microscope viewing and staging.

Specifications: • Table: 5 1/2” X 12” T-slots on 2.5” centers • Height: 4.5” • Travel: 8” longitude 5” transverse • Base: 8” x 9” oval w/ u-slots for up to 5/8” bolts, on 7.75” to 8.5” bolt circle • Weight: 45lbs. • T-slots: 5⁄8"

SWIVEL ANGLE TABLE Features: • Cast iron heavy duty construction • Ground table surface • 0-90° range • Machined T-slots • Settings locked by two screws Stock No. SIZE 226-210 5"x6" 226-211 6"x8" 226-212 8"x10" 226-213 10”x12” 226-214 12"x15"

Ht. 41⁄2" 5" 61⁄2" 71⁄2” 9"

Wt. 12 lbs. 26 lbs. 60 lbs. 110lbs. 165 lbs.

Price $79 $105 $130 $219 $285


15

MICRO GRIP CLAMPING KIT Precision Set STOCK NO. 223-620 Features

$59

• Cam action provides quick strong clamping • Low profile • 5/8” T-slot size

Includes • 4 T-Nuts • 6 Fixture Clamps • 2 Hex Keys • Fitted Plastic Case

52PC CLAMPING KIT Precision Set STOCK NO. 223-625

$69

• 5⁄8" TABLE SLOT • Set includes: — 4 ea. of 1⁄2’ dia.: 3", 4", 5", 6", 7", 8" studs — 4 flanged nuts — 6 t-nuts — 4 coupling nuts — 6 step clamps — 6 steel step blocks, 1" width — metal rack


16

PRECISION LIVE CENTERS Features: • Precision engineered and constructed • High quality bearings assure smooth and precise rotation • Made of hardened steel and precision ground for accuracy Stock No. MT Max Wt. RPM Ctr.pt. Price 310-201S 1 200 5000 60° $32 310-202S 2 600 5000 60° $39 310-203S 3 900 4000 60° $49 310-204S 4 1800 3000 60° $59 310-205S 5 3000 2500 60° $79

BULLNOSE LIVE CENTER Ruggedly constructed for machining of pipe, tubing or any hollow shaft. Ultra high quality taper roller bearings and thrust bearings assure smooth, precise rotation. Heat-treated tool steel used throughout. Precision ground finishes guarantee durability and accuracy. Stock No. Taper Head Point Head Shank Total of Shank

310-001 310-002 310-003 310-004 310-005 310-006

MT2 MT3A MT3B MT4 MT5A MT5B

70° 70° 75° 75° 75° 75°

width

width

2.44 2.95 4.13 4.92 5.91 6.61

0.47 0.75 1.26 1.38 1.38 1.57

Length Length

2.24 2.28 2.68 3.11 3.82 4.25

3.15 3.74 3.78 4.57 5.51 5.55

Length

Price

5.39 6.02 6.46 7.68 9.33 9.80

$79 $115 $135 $165 $220 $385


17

BORING HEADS FEATURES: • High quality, excellent performance and practical design at an affordable price. • Maximum rigidity is assured when boring bar holder is used in an offset position. • Hardened and ground adjusting screw along with our wide base design guarantees long life and trouble-free use. Stock No. 350-002 350-003 350-004

Size 2” 3” 4”

Hole Size 1 ⁄2” 3 ⁄4” 1”

Offset 5 ⁄8” 3 ⁄4” 1”

Thread Mount 7 ⁄8-20 11⁄2-18 11⁄2-18

Price $89 $115 $199

CARBIDE TIPPED BORING BAR SETS Features: • C-6 grade • Up to 100% longer tool life • All shanks are ground to +0”/-.0005”. • Tool life is extended because each bar has far more steel behind the cutting edge for heavier chatterfree cut, deeper bore and more precise work. • The same bar can bore flat-bottom hole or face. • Grind bar on cutting end for special tools such as grooving, threading or automatic operations. • All 1/2”, 3/4”, and 1” shanks fit most boring and facing heads Stock No. 375-111 375-333 375-555 375-777 375-999

Size 3 ⁄8” 1 ⁄2” 5 ⁄8” 3 ⁄4” 1”

Pcs. in set 9 9 12 12 7

Price $19.95 $41 $52 $72 $94

Threaded 11⁄2” x 18 per inch Description R8 Bridgeport 1" straight shank

Price $19.95 $19.95

Threaded ⁄8” x 20 per inch Description R8 bridgeport 1 ⁄2" straight shank 3 ⁄4" straight shank

$140

STOCK NO: 355-203 3" Boring Combo

$197

• 3" Boring Head • R8 Shank (11⁄2 - 18 TPI) • 3⁄4" Boring Bar Set

7

Stock No. 350-105 350-106 350-107

STOCK NO: 355-202 2" Boring Combo • 2" Boring Head • R8 Shank (7⁄8 - 20 TPI) • 1⁄2" Boring Bar Set

BORING HEAD SHANKS Stock No. 355-108 355-114

BORING COMBO SETS

Price $19.95 $15.00 $15.00

STOCK NO: 355-204 4" Boring Combo • 4" Boring Head • R8 Shank (11⁄2 - 18 TPI) • 1"Boring Bar Set

$299


18

PRECISION MACHINE VISE WITH SWIVEL BASE Features: • Eliminates jaw tilt • Permits clamping in four positions • The special design does away with the primary defect found in almost every other vise (movement or tilt of the movable jaw while it is clamped). • Made of material which is highest quality ductile iron 80,000 psi. • Flame hardened bed standard on all models. • Important ground surfaces include top and bottom vise bed, tops of both jaws in pairs. • All jaw plate mounting surfaces. • Swivel base included • Top and bottom precision ground. • Two time 180° graduation, 1° increments. • 4 jaw plate positions allowing extra capacity with the jaw plates in the outside position. • Totally enclosed heat treated screw. • Important ground surfaces include: top and bottom of bed and stationary and movable jaws. Stock No. Jaw W. Jaw Ht. 235-103 3” 1” 235-104 4” 1.34” 235-106 6” 1.5” 235-108 8” 2.45”

Max Open Weight 2.875” 18 4.13” 44 6” 110 8.25” 150

SPEED HANDLE STOCK NO. 235-107 Features:

$14.95

• 3⁄4" hex hole to fit most brands • Vises can be completely opened in a few seconds • Saves time and increases productivity • Assures more precise feel of clamping pressure

Price $135 $189 $269 $395


19

PRECISION SCREWLESS VISE Features: • Hardened and stabilized • Precision ground to a mirror finish • Simple operation and extremely versatile • Squareness and parallelism is approx. +/- .0002” on critical sides Stock No. Size Total Length Total Ht. 235-301 1" 2.5" 1.15" 235-302 2" 5.95" 2.30" 235-303 3" 7.50" 2.65"

Jaw Opening 0.79" 3.00" 3.35"

Price

0.785"

$45

$35 $75 $79

Stainless Steel 235-305

1"

2.5"

1.15"

TOOLMAKERS VISE STOCK NO. 235-310 Features:

$85

• Hardened and precision ground • Accuracy: +/- .0004" in parallelism • Jaw width: approx. 2.485" • Jaw height: approx 1.250" • Jaw opening: approx. 3.345" • Total length: 7.50" • Used in inspection, grinding, milling, boring and general machine work

PRECISION SCREWLESS SINE VISE STOCK NO. 235-315 Features:

$175

• Square and parallel within .0002"

Specifications: • Center distance of rolls 5" within .0002" • Length—7.5" • Width—3" • Height—35⁄8" • Jaw Capacity—43⁄4" • Jaw Depth—11⁄2"


20

ACCU-SET LATHE CHUCKS

Same chuck now sold under many famous brands!

Features: • 3-Jaw & 6-Jaw self centering chucks • .0005" T.I.R. repeatability • Hardened and ground scroll and jaws. • Four adjustable screws • Three hardened and ground pinions • Two-piece hardened reversible jaws Stock No. Chuck Dia. Thru Hole Price 3-Jaw 560-006 6" 1.535 $425 560-008 8" 2.260 $599 560-010 10" 2.835 $795 560-012 12" 3.268 $1150 6-Jaw 560-026 6" 1.535 $650 560-028 8" 2.260 $775 560-030 10" 2.835 $1050 560-032 12" 3.268 $1250

3-Jaw chuck

8" ACCU-RITE 3-JAW ADJ. CHUCK STOCK NO.: 559-008 Features:

$235

• Self-centering guaranteed to 0.0005" • Two-piece reversible jaws • High-strength semi-steel body • Chuck runout adjustable to 0.0005" by 4 side screws • All jaws are standard American tongue and groove

Specifications: • Chuck diameter: 8.15" • Thru hole: 2.48" • Maximum grip: 7.30" • Weight: 35 lbs.

6-Jaw chuck

Note: Backplate not provided. User must provide own adaptor.

BACKPLATES For Accu-Set chucks only Stock No. 560-046 560-048 560-049 560-050 560-051 560-052 560-053

Description 6" D1-4 mount 8" D1-4 mount 8" D1-6 mount 10" D1-6 mount 10" D1-8 mount 12" D1-6 mount 12" D1-8 mount

Price $99 $135 $135 $145 $145 $200 $200


21

3-JAW LATHE CHUCKS PLAIN BACK These precision chucks are used on all different types of lathes, for all types of applications.

Features: • Two-piece hardened, reversible jaws (over 5") • Standard accuracy • Semi-steel body • Standard scroll • Complete with chuck key and mounting screws Stock # Diameter Center hole Weight 559-110* 3" 0.63 6 lbs. 559-111* 4" 0.87 8 lbs. 559-112* 5" 1.18 15 lbs. 559-113 6" 1.57 20 lbs. 559-114 8" 2.55 35 lbs. 559-115 10" 3.15 55 lbs. 559-116 12" 3.93 109 lbs. 559-117 15" 5.32 152 lbs. 559-118 20" 8.27 280 lbs. *denotes one piece solid jaws

Price $99 $105 $110 $150 $199 $250 $355 $490 $1025

3-JAW LATHE CHUCKS DIRECT MOUNT D-1 series short taper spindle with camlock nose

Features: • Hardened and ground two-piece reversible jaws • Semi-steel body • Complete with chuck key

• Standard accuracy • Standard scroll

Stock No. Diam. Center Hole 559-100 6" 1.57 559-101 6" 1.57 559-102 8" 1.96 559-104 8" 1.96 559-105 10" 2.75 559-106 10" 2.75 559-107 10" 2.75 559-108 12" 3.93 559-108D 12" 3.93 559-109 15" 5.11 559-109D 15" 5.11

Weight 31 lbs. 31 lbs. 46 lbs. 46 lbs. 82 lbs. 82 lbs. 82 lbs. 110 lbs. 110 lbs. 192 lbs. 192 lbs.

Mount D1-3 D1-4 D1-4 D1-6 D1-5 D1-6 D1-8 D1-8 D1-6 D1-11 D1-8

Price $245 $245 $265 $265 $380 $380 $380 $465 $465 $625 $625


22

4-JAW LATHE CHUCKS PLAIN BACK (Independent)

Features: • Standard accuracy • Heat-treated operating screws • Solid jaws Stock No. 557-006 557-008 557-010 557-012 557-016 557-020

Diam. 6" 8" 10" 12" 16" 20"

• Semi-steel body • Mounting screws • Chuck wrench

Center Hole 11⁄2" 115⁄16" 21⁄2" 33⁄4" 33⁄4" 61⁄4"

Weight 23 lbs. 38 lbs. 56 lbs. 95 lbs. 165 lbs. 225 lbs.

Price $115 $145 $165 $199 $299 $550

4-JAW LATHE CHUCKS DIRECT MOUNT (Independent) D-1 series short taper spindle with camlock nose

Features: • Standard accuracy • Independent jaws Stock No. 557-125 557-127 557-128 557-129 557-130

• Semi-steel body • Complete w/ chuck key/mounting screws

Diam. Center Hole 8" 2.16 10" 2.95 12" 3.74 12" 3.74 16" 6.30

Mount D1-4 D1-6 D1-6 D1-8 D1-8

Wt. 35 50 101 101 141

Price $220 $270 $375 $375 $435


23

LATHE CHUCK ADAPTORS • Direct mount converters • For standard type 3-jaw chucks Stock No. 556-226 556-216 556-218 556-238 556-240 556-250 556-242 556-252 556-272 556-273 556-274 556-280

Taper D1-5 D1-4 D1-4 D1-6 D1-6 D1-8 D1-6 D1-8 D1-11 D1-8 D1-11 D1-11

Dia. 6" 6" 8" 8" 10" 10" 12" 12" 12" 15" 15" 20"

Price $79 $79 $99 $99 $125 $125 $160 $160 $160 $199 $199 $499

5C CHUCK ADAPTORS For 3-jaw chucks Features: • Precision engineered for exacting tolerances • Offers lathe chuck access to any 5C spindle • Use your chuck on mills, grinding machines, lathes and drill presses. • Available in different diameters

5C PRECISION LATHE CHUCKS 3-jaw self-centering scroll Features: • Eliminates tearing down a collet set up on a lathe • Works with any 5C tooling • Available in 4 different sizes StockNo. 225-233 225-234 225-235 225-236

Chuck Dia. 3" 4" 5" 6"

Price $148 $155 $170 $228

Stock No. 225-213 225-214 225-215 225-216

Chuck Dia. 3" 4" 5" 6"

Price $49 $59 $69 $79


24

LEXAN LATHEGUARD Features: • Semi-circular wraparound • Heavy duty cast mounting bracket • Heavy-duty chrome-plated tube and hardware • Ready to mount with two screws • Locks in swing-away or functional position • Rib reinforced • Light weight • Prevents accidents • Replacement shields available

Stock No. Lathe Swing Center Ht. Chuck Cap. Shield Width

227-100 227-102 227-104 227-106 227-108

under 6” 6-12" 12-16" 16-20" 20-24"

3.9" 6" 8" 10" 13"

6" 8" 12" 16" 20"

VISORGUARD STOCK NO.: 227-120 Features:

$142

• Flexible arm permits setting of visorguard at the correct height and angle for each setup. • Flip shield up to load part, and down for machining. • Wing shape protects workers at adjacent machines • Can be installed in minutes on CNC mills, conventional mills, and others. • Comes complete with mounting bracket, flexible arm and all hardware including mounting hole and thumbscrew for attaching coolant system.

Dimensions: Shield size—16" wide x 8" high Flexible arm—10" long

61⁄4" 61⁄4" 8" 8" 8"

Shield Length

Tube Length

Price

7.8" 11.8" 15.8" 19.70" 23.60"

10" 10" 11.5" 13" 13"

$143 $168 $198 $215 $242


25

R8 COLLETS – PRECISION GRADE Features: • Precision-ground and hardened to exacting tolerances • Concentricity: +/- .0005” TIR • Fits any standard R8 spindle

INDIVIDUAL SIZES

$5.95

Stock No. 200-800 200-804 200-808 200-812 200-816 200-820 200-824

Size 1 ⁄8" 1 ⁄4" 3 ⁄8" 1 ⁄2" 5 ⁄8" 3 ⁄4" 7 ⁄8" No.pcs. 7 13 25

Sizes ⁄8"-7⁄8" x 8ths 1 ⁄8"-7⁄8" x 16ths 1 ⁄8"-7⁄8" x 32nds

Price

1

$40 $76 $145

3/8–16 Drawbar thread

Stock No. 200-201 200-202 200-203 200-204 200-205 200-206 200-207

Size 1 ⁄8" 3 ⁄16" 1 ⁄4" 5 ⁄16" 3 ⁄8" 7 ⁄16" 1 ⁄2"

3 MORSE TAPER PRICE: $12.50 Stock No. 200-301 200-302 200-303 200-304 200-305 200-306 200-307 200-308 200-309 200-310 200-311

• These precision collets are produced to exacting tolerances • TIR = .0005” • Internal/external threads

Stock No. No. pcs. Sizes Price 1 200-571 15 ⁄8"-1" x 16ths $90 1 200-572 29 ⁄8"-1" x 32nds $180 1 200-573 57 ⁄8"-1" x 64ths $350

MORSE TAPER COLLETS 2 MORSE TAPER PRICE: $10

Features:

SETS

SETS Stock No. 200-828 200-829 200-830

5C COLLETS PRECISION GRADE

Size 1 ⁄8" 3 ⁄16" 1 ⁄4" 5 ⁄16" 3 ⁄8" 7 ⁄16" 1 ⁄2" 9 ⁄16" 5 ⁄8" 11 ⁄16" 3 ⁄4"


26

CNC PULL STUD WRENCH STOCK NO. 223-226 Features: Patented Design!

$59

• Individually machined from 6061-16 aircraft aluminum • Uses replacable hardened steel inserts • Safely and easily installs/removes pull stud retention knobs • Fast self-aligning, non-slip design minimizes damage to pull studs • Increases tooling flexibility and reduces tooling inventory • Saves time and aggravation • Lifetime warranty • Fits all 40 taper tooling • Supplied with 2 inserts that fits standard pull studs

PHASE II CNC TOOLHOLDER FIXTURE Stock No. 226-100 226-105

Taper 40 50

Price $125 $125

Features: • Horizontal/vertical positioning • Compact, efficient design for easy mounting and use • Use on CAT and BT tapers • Secures toolholder for maximum protection • Easy access of cutting tool and pull stud

Stock No. 226-100 226-105

Taper 40 50

A 1.85" 2.80"

B 2.50" 3.68"

C 3.74" 5.12"

D 2.38" 3.39"

E F 2.50" 5.12" 3.50" 6.89"

G 0.62" 1.00"

H I J 4.33" 5.71" 6.10" 5.90" 7.48" 7.87"

K 6.73" 8.50"


27

ER STYLE COLLETS Features: • Concentricity: .0004", except ER-40 (.0005") • Design affords highest gripping power

ER-11 Stock No. 223-721 223-723 223-725 223-727 223-729 223-731 223-733

$14.95

Size 1

⁄32" ⁄16" 3 ⁄32" 1 ⁄8" 3 ⁄16" 7 ⁄32" 1 ⁄4" 1

ER-11 SET StockNo. 223-735

Pcs. 7

Range 1 ⁄32" - 1⁄4"

Size 1 ⁄32" 1 ⁄16" 3 ⁄32" 1 ⁄8" 3 ⁄16" 7 ⁄32" 1 ⁄4" 5 ⁄16" 11 ⁄32" 3 ⁄8"

Range .020-.040 .0625-.0428 .0937-.074 .125-.086 .187-.148 .219-.179 .25-.211 .312-.273 .344-.304 .375-.336

$16.95

ER-16 SET Stock No. 223-765

$165

Pcs. 10

ER-20 Stock No. 223-773 223-775 223-777 223-779 223-781 223-783 223-785 223-787 223-789 223-791 223-793 223-795

.031-.011 .062-.043 .094-.074 .125-.105 .187-.168 .219-.199 .25-.23 $99

ER-16 Stock No. 223-744 223-746 223-748 223-750 223-752 223-754 223-756 223-758 223-760 223-762

Range

Range 1 ⁄32" - 3⁄8" $16.95

Size 1 ⁄16" 3 ⁄32" 1 ⁄8" 3 ⁄16" 7 ⁄32" 1 ⁄4" 5 ⁄16" 11 ⁄32" 3 ⁄8" 13 ⁄32" 7 ⁄16" 1 ⁄2"

Range .0625-.0428 .0937-.074 .125-.086 .187-.148 .219-.179 .25-.211 .312-.273 .344-.304 .375-.336 .406-.367 .437-.398 .5-.461

• True double angle for better accuracy • 16 jaws for powerful gripping and parallel clamping

ER-20 SET Stock No. 223-799

$199

Pcs. 12

Range 1 ⁄16" - 1⁄2"

Size 1 ⁄16" 3 ⁄32" 1 ⁄8" 3 ⁄16" 7 ⁄32" 1 ⁄4" 5 ⁄16" 11 ⁄32" 3 ⁄8" 13 ⁄32" 7 ⁄16" 1 ⁄2" 17 ⁄32" 9 ⁄16" 5 ⁄8"

Range .0625-.0428 .0937-.074 .125-.086 .187-.148 .219-.179 .25-.211 .312-.273 .344-.304 .375-.336 .406-.367 .437-.398 .5-.461 .531-.492 .562-.523 .625-.586

Pcs. 15

Range 1 ⁄16" - 5⁄8"

ER-25 Stock No. 223-806 223-808 223-810 223-812 223-814 223-816 223-818 223-820 223-822 223-824 223-826 223-828 223-830 223-832 223-834

$16.95

ER-25 SET Stock No. 223-835

$249

ER-32 Stock No. 223-845 223-847 223-849 223-851 223-853 223-855 223-857 223-859 223-861 223-863 223-865 223-867 223-869 223-871 223-873 223-875 223-877 223-879

$16.95

Size 3 ⁄32" 1 ⁄8" 3 ⁄16" 7 ⁄32" 1 ⁄4" 5 ⁄16" 11 ⁄32" 3 ⁄8" 13 ⁄32" 7 ⁄16" 1 ⁄2" 17 ⁄32" 9 ⁄16" 5 ⁄8" 21 ⁄32" 11 ⁄16" 3 ⁄4" 25 ⁄32"

Range .0937-.074 .125-.086 .187-.148 .219-.179 .25-.211 .312-.273 .344-.304 .375-.336 .0937-.074 .437-.398 .5-.461 .531-.492 .562-.523 .625-.586 .656-.617 .687-.648 .75-.711 .781-.742

ER-32 SET Stock No. 223-880

$300

Pcs. 18

Range 3 ⁄32" - 25⁄32"

Size 1 ⁄8" 3 ⁄16" 7 ⁄32" 1 ⁄4" 5 ⁄16" 11 ⁄32" 3 ⁄8" 13 ⁄32" 7 ⁄16" 1 ⁄2" 17 ⁄32" 9 ⁄16" 5 ⁄8" 21 ⁄32" 11 ⁄16" 3 ⁄4" 25 ⁄32" 13 ⁄16" 27 ⁄32" 7 ⁄8" 15 ⁄16" 31 ⁄32" 1"

Range .125-.086 .187-.148 .219-.179 .25-.211 .312-.273 .344-.304 .375-.336 .406-.367 .437-.398 .5-.461 .531-.492 .562-.523 .625-.586 .656-.617 .687-.648 .75-.711 .781-.742 .812-.773 .844-.804 .875-.836 .937-.898 .969-.929 1-.961

Pcs. 23

Range 1 ⁄8" - 1"

ER-40 Stock No. 223-890 223-892 223-894 223-896 223-898 223-900 223-902 223-904 223-906 223-908 223-909 223-910 223-912 223-914 223-916 223-918 223-920 223-922 223-924 223-926 223-928 223-930 223-932

$16.95

ER-40 SET Stock No. 223-935

$385


28

ER COLLET SYSTEM FEATURES: • Wide holding range requires fewer collets and changes • Unique self-releasing system eliminates sticking • Suitable for all milling and drilling operations • Flute holding capability for the highest concentricity and clamping power • Accuracy to .0004" • Complete kits include: chuck holder, nominal size collets, non-slip spanner wrench, and case.

ER-16 Collet Type Shank Size Chuck Holder Holder Price Full Set Set Price ER-16 R8 x 4”L 223-940 $95 223-944 $225 3 3 ⁄32” – 3⁄8” ⁄4” D x 21⁄2” 223-942 $95 223-946 $225 8pc. Set set includes the following collet sizes: 3/32”, 1/8”, 3/16”, 7/32”, 1/4”, 5/16”, 11/32” and 3/8”.

ER-20 Collet Type Shank Size Chuck Holder Holder Price Full Set Set Price ER-20 R8 x 4” 223-950 $95 223-954 $260 3 3 ⁄32” –1⁄2” ⁄4” x 21⁄2” 223-952 $95 223-956 $260 10pc. Set set includes the following collet sizes: 3/32”, 1/8”, 3/16”, 7/32”, 1/4”, 5/16”, 11/32”, 3/8”, 7/16”, and 1/2”

E-32 Collet Type Shank Size Chuck Holder Holder Price Full Set Set Price ER-32 R8 x 4” 223-970 $95 223-974 $295 3 ⁄32” – 3⁄4” 1” x 21⁄2” 223-972 $95 223-976 $295 12pc. Set set includes the following collet sizes: 3/32”, 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 3/4”, 9/16”, 5/8”, 21/32”, 11/16”, and 3/4”

ER-40 Collet Type Shank Size Chuck Holder Holder Price Full Set Set Price ER-40 R8 x 4” 223-980 $109 223-984 $360 1 ⁄8” – 1” 11⁄4” x 21⁄2” 223-982 $109 223-986 $360 15pc. Set set includes the following collet sizes: 1/8” 3/16”, ?”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16” and 1”


29

END MILL HOLDERS with R-8 SHANK • Made from high quality steel forgings • Prevents run-out of your cutting tools • Ground shank and hole, heat-treated for durability • 7/16-20 drawbar thread • For Bridgeport type endmills Stock No. 222-841 222-842 222-843 222-844 222-845 * 222-846 * 222-847 * 222-848 * 222-849 * 222-850

Hole Diameter 3 ⁄16" 3 ⁄8" 1 ⁄2" 5 ⁄8" 3 ⁄4" 7 ⁄8" 1" 11⁄4" 11⁄2" Complete Set

* for single endmills only

Price $18.95 $18.95 $18.95 $18.95 $19.95 $19.95 $19.95 $22.95 $27.95 $185

MORSE TAPER DRILL CHUCK ARBORS • Morse Taper to Jacobs Taper Stock No. 222-745 222-746 222-747 222-748 222-750 222-751

MT to JT 2MT–1JT 2MT–2JT 2MT–3JT 2MT–4JT 2MT–6JT 2MT–33JT

Price

222-752 222-753 222-754 222-755 222-756 222-757 222-758

3MT–1JT 3MT–2JT 3MT–3JT 3MT–4JT 3MT–5JT 3MT–6JT 3MT–33JT

$4.95 $4.95 $4.95 $4.95 $5.95 $4.95 $4.95

222-759 222-760 222-761 222-762 222-763 222-764

4MT–2JT 4MT–3JT 4MT–4JT 4MT–5JT 4MT–6JT 4MT–33JT

$7.50 $7.50 $7.50 $8.50 $7.50 $7.50

222-766 222-767

5MT–3JT 5MT–4JT

$3.99 $3.99 $3.99 $3.99 $3.99 $3.99

$11.95 $11.95

R8 DRILL CHUCK ARBORS • R-8 Shank to Jacobs Taper Stock No. 222-771 222-772 222-773 222-774 222-775 222-776

R-8 — JT R8 — JT1 R8 — JT2 R8 — JT3 R8 — JT33 R8 — JT6 R8 — JT4

Price $13.95 $13.95 $13.95 $13.95 $13.95 $13.95


30

PRECISION KEYLESS DRILL CHUCKS Designed for toolroom and production machinery, where accuracy, gripping g power and the keyless features are desired. • Precision production line use • Easily closed by hand • Does not slip Stock No. 222-870 222-872 222-874 222-876 222-878 222-880 222-884

Capacity 0-1/4” 0" – 3⁄8" 0-3/8” 1/32-1/2” 1/32-1/2” 1/32-5/8” 1/32-3/4”

Jacobs Taper 1JT 2JT 33JT 6JT 33JT 6JT 3JT

Price $25.95 $33.95 $33.95 $36.95 $36.95 $45.95 $54.90

CNC Integral Keyless Chuck • High precision keyless chuck-arbor is integrated for a single piece construction. • Single piece construction provides for increased accuracy and greater rigidity. • Balanced design. • Increased holding power when tightened by wrench, preventing tool slippage. • Easy to use. • Safer than separate shank models • Wrench supplied Stock# 222-890 222-892 222-894 222-896

Capacity 0-13mm 3-16mm 0-13mm 3-16mm

Taper CT40 CT40 CT50 CT50

L 170 MM 179.1 MM 213.4 MM 222.5 MM

L1 160.4 MM 165.4 MM 203.8 MM 208.8MM

WEIGHT 3.5 LBS 4.3 LBS 9.2 LBS 9.9 LBS

PRICE $199 $199 $245 $245


31

3/8” KEYLESS CHUCKS—ECONOMY KEYLESS TYPE • For economical production line use • An excellent value • Easily closed by hand • Does not slip • Hardened and ground Stock No. Capacity 222-782 0" – 3⁄8" 222-783 0" – 3⁄8"

Jacobs Taper JT2 JT33

Price $15.95 $15.95

DRILL CHUCKS KEY TYPE All parts are made of high-grade alloy steel, and heat treated resulting in strong durability. Stock No. 222-701 222-702 222-703 222-704 222-705 222-706

Max. Size 1 ⁄4" 3 ⁄8" 1 ⁄2" 1 ⁄2" 5 ⁄8" 3 ⁄4"

Jacobs Taper JT1 JT2 JT6 JT33 JT3 JT3

Price $10.25 $13.50 $21.95 $21.95 $22.95 $25.95


32

MICRODE 20mm ELECTRODE HOLDER LONG ELECTRODE HOLDER Stock No.: M102002 Features: • 20mm diameter • Solid nose • 100mm from back of cross pin to shank end • Hardened and ground locating pin • 8mm flush hole in rear • ATC flat for automatic tool changer • O-ring • Retaining ring for automatic tool changer applications Qty. 1-10 11-25 26-50 51-100 101-200

Price $13.50 $13.00 $12.50 $12.00 $11.50

MICRODE EDM ELECTRODE HOLDER VISE STANDARD ELECTRODE VISE Stock No.: M103001 Features:

$79

• 20mm diameter shank • 50mm from back of cross pin to shank end • Hardened and ground locating pin • Jaw opening: 20mm • Jaw width: 25mm • Jaw Height: 9.3mm

STAINLESS STEEL ELECTRODE VISE Stock No.: M103002 $129 Features: • 20mm diameter shank • 50mm from back of cross pin to shank end • Hardened and ground locating pin • Jaw opening: 20mm • Jaw width: 25mm • Jaw Height: 9.3mm • Made of high quality (440) stainless steel


33

5C CLUTCH COLLETS • Invaluable for holding extra large work up to 6” diameter for a limited depth. • The precision-ground body and threads are heat treated. • The soft head may be bored or stepped out as desired. • Step chucks are designed and constructed to eliminate the need for closers. Stock No. 224-102 224-103 224-104 224-105 224-106

Dia. 2” 3" 4” 5" 6”

Price $26 $30 $44 $59 $65

5C EMERGENCY COLLET STOCK NO. 225-116

$10

• 1/16” steel emergency collet • Especially well-suited for holding soft or delicate workpieces without marring surfaces


34

DEMAGNETIZER STOCK NO. 900-315 Features:

$55

• 115V AC with on/off switch • Table size — 63⁄4" X 41⁄4" • Demagnetize dies, punches, cutters or any tools that have become magnetized • Weight — 11 lbs. • Not rated for continuous run

MACHINE COUNTER STOCK NO. 340-005 Features:

$4.95

• Registers 0 to 99999 • Knob resets to zero • Approx. 3⁄5" (45°) movement will actuate register • Arm may be set in any position and the spring allows for variations of alignment • Five digit counter has clear white numerals, no-glare black finish, chrome-plated arm and spring for rustfree service • 4 flanged holes for rigid mounting • 15⁄16" high X 21⁄2" wide X 11⁄2" deep

QUILL FEED HANDLE STOCK NO. 223-224 Features:

$13.95

• The long-needed time-saving accessory for milling operators • No more pulling off and resetting the quill feed handle for repositioning • Flick of the wrist retracts pin from index plate of quill feed mechanism and lets you move handle into any desired position • Spring pushes pin back from quill feed actuatuation up or down • Speeds operations considerably, particularly for deep hole drilling, etc. • Replaces conventional feed handle in seconds; no holes to be drilled • Heavy-duty construction; handle will not bend


35

HAND TAPPER STOCK NO.: 265-110 Features:

$139

• Spindle balance allows for highly sensitive tap feel • Offset handle for speed and ease of operation • Spindle hardened and ground • Sliding jaw prevents crimping • Includes set of 9 adaptors; 6", 8", 10", 1⁄4", 5⁄16", 3⁄8", 7⁄16", 1⁄2" and 5⁄8" • Quality workmanship • Precision engineered • Simple to use • No guess work • Lower labor costs • Less tap breakage • Highly sensitive • Slide lock vise • Spindle balance complete with ring • Depth control screw

Specifications: • Tap capacity: No.6 to 5⁄8" • Table to bracket: 77⁄8" • Spindle to bracket: 71⁄2" • Table: 61⁄2" x 121⁄2" • Spindle diameter: 1" • Weight: 44 lbs

TRANSFER PUNCH SET STOCK NO. 250-028 Features:

$13.95

• Set includes: 28 punches–47⁄8" long with indexed stand • 3⁄32" to 1⁄2" x 64ths, plus handy 17⁄32" size • For toolmakers, machinists, and tool cribs • Made of the finest tool steel, carefully heat treated and tempered with black oxide finish • Diameters .0025" undersize to facilitate use


36

FLYCUTTER SETS Features: • Use standard tool bits • No need for expensive endmills and endmill sharpening • Adapt to boring heads • Balanced and engineered to TIR .002” • Black oxide finish Stock No. Description 820-105 3pc. set 820-106 3pc. set 820-107 6pc. combo set

Shank 1 ⁄2" 3 ⁄4" 1 ⁄2" & 3⁄4"

Price $14.95 $25.95 $39.95

Stock No. Head Diameter 820-105 820-106 820-107

P-TYPE CUTOFF BLADES Features: • Made from top quality HSS • Used for cutoff operations • Parallel style • T-shape • Can be ground for special shapes • Made as tool blanks and must be ground to their usable shape prior to use. Stock No. Ind. # 252-208 P5N 252-209 P5 252-210 P6

Thick 5 ⁄32" 3 ⁄16" 1 ⁄4"

Height 7 ⁄8" 7 ⁄8" 7 ⁄8"

Length 6" 6" 6"

Price $13.00 $14.00 $15.00

3

1

3

⁄4”, 1 ⁄8”, 1 ⁄8” 1 1⁄2”, 2”, 2 1⁄2” COMBO

Tool Bit Size 3

⁄16”, 1⁄4”, 5⁄16” ALL USE 5⁄16” COMBO


37

INDEXABLE BORING BAR SETS STUCR STOCK NO. 252-412 Features:

$275

• Small hole capacity: minimum of .430” • Negative 3° end cutting edge for 7° positive triangle TCMT inserts • Bar is made of heat treated, precision ground alloy steel • The insert is securely held with a torx screw to reduce tool slipping • Positive insert allows for heavier cuts 31pc set contains: 4- Indexable Boring Bars 2 pc 1/2”(6-2 & 8-2)1pc 5/8”, 1pc 3/4” 10- gold coated TCMT 21.51 inserts 10- gold coated TCMT 32.52 inserts 4- Torx screws 1- Torx wrench 1- Fitted case

SCLCR INDEXABLE BORING BARS Features: • Extreme fine gloss finish • Utilizes 80° diamond CCMT inserts • Negative 5° end and side cutting angle Stock No. Item Code Shank Insert 3 252-401 S-SCLCR ⁄8" CCMT 6-2 2151 2152 1 252-403 S-SCLCR ⁄2" CCMT 8-3 3251 3252 5 252-405 S-SCLCR ⁄8" CCMT 10-3 3251 3252 3 ⁄4" CCMT 252-407 S-SCLCR 12-3 3251 3252

Price $31.25

$32.95

$42.95

$43.95

Extra Inserts sold in 10 packs only Stock No. 252401-01 252403-01

Style CCMT251 CCMT3252

Price $5.50 $5.50 per insert

SCLCR STOCK NO. 252-410 Features:

$275

• Extreme Gloss Finish • Utilizes 80° Diamond CCMT Inserts • Negative 5° End Side Cutting Angle • Bar Hardness Approx. 45HRC • The insert is securely held with a torx screw to reduce tool slipping 31pc set contains: 4 Indexable Boring Bars 1each of 3/8”,1/2”, 5/8” & 3/4” 10- CCMT 21.51Gold Coated Inserts 10- CCMT 32.5 Gold Coated Inserts 4- Torx Screws 1-Torx Wrench 1-Fitted Case


38

INDEXABLE CARBIDE TURNING TOOL SETS Features: • Versatility of cutting in any direction • No grinding • Built-in chipbreaker groove • No tool resetting • Positive cutting rake action • Includes 5 tools (TAR, TAL, TBR, TBL, AND TE), extra screws, extra wrenches, packed in a wooden case • Uses TCMT inserts Stock No. 252-101 252-103 252-105 252-107 252-109

Size 3 ⁄8" 1 ⁄2" 5 ⁄8" 3 ⁄4" 1”

Insert TCMT21.51 TCMT32.51 TCMT32.51 TCMT32.51 TCMT432

Price $37 $42 $49 $55 $60

Extra Inserts (sold in 10-packs) Stock No. Style 252101-01-5 TCMT21.51 252103-01-5 TCMT32.51 252109-01-5 TCMT432

Set Price/Insert 3 ⁄8" $4.25 1 ⁄2", 5⁄8", & 3⁄4" $4.50 1" $7.95

CARBIDE TIPPED BORING BAR SETS Grade C6 Features: • Up to 100% longer tool life • All shanks are ground to +0”/-.0005”. • Tool life is extended because each bar has far more steel behind the cutting edge for heavier chatter-free cut, deeper bore, and more precise work • The same bar can bore flat-bottom hole or face • Grind bar on cutting end for special tools such as grooving, threading, or automatic operations • All 1⁄2”, 3⁄4”, and 1” shanks fit most boring and facing heads Stock No. 375-111 375-333 375-555 375-777 375-999

Size 3 ⁄8" 1 ⁄2" 5 ⁄8" 3 ⁄4" 1"

Pcs. in set 9 9 12 12 7

Price $19.95 $41 $52 $72 $94


39

20PC TIN COATED END MILL SET HSS* centercutting

STOCK NO. 900-020 Features:

$89

• Increase tool life and productivity • Set includes one of each size in both 2- and 4-flute: — 3⁄16", 1⁄4", 5⁄16", 3⁄8", 7⁄16"–3⁄8" shank — 1⁄2", 9⁄16"–1⁄2" shank — 5⁄8", 11⁄16"–5⁄8" shank — 3⁄4"–3⁄4" shank

ZERO-FLUTE COUNTERSINK SETS Stock No.: Degree Price 820-082 82° $42 Set of five deburring & countersink tools: 1 ⁄16”, 5⁄32”, 3⁄16”, 5⁄16” and 9⁄16”


40

ULTRA PRECISION V-BLOCK AND CLAMP SET Features: • Precision made of tool steel. • Completely hardened and ground • Quick, accurate, and positive means of holding workpieces for layout, machine, grinding, or inspection • One reversible swing-away clamp is provided w/ each V-block • Side slots allow easy clamping to almost any workspace • All V-blocks are parallel, squared, and centered within .0002" Stock No. 910-301 910-302 910-303

Length 13⁄8" 23⁄8" 41⁄8"

Width 133⁄8" 23⁄8" 41⁄8"

Height 13⁄16" 2" 31⁄16"

Price $33.95 $59.95 $89.95

STEEL V-BLOCKS Features: • Supplied in matched pairs • Manufactured from high quality castings, properly seasoned against distortion • Blocks are accurately machined square and parallel Stock No. Length Length V 900-703 3" 13⁄4" 900-704 4" 21⁄4" 900-705 5" 21⁄2" 900-706 6" 31⁄8" 900-707 7" 31⁄2" 900-708 8" 41⁄2" 900-710 10" 5"

Height 23⁄8" 25⁄8" 31⁄8" 31⁄2" 41⁄2" 51⁄2" 65⁄8"

Thick 15⁄16" 15⁄8" 2" 21⁄2" 3" 4" 5"

Price $15 $17.50 $29 $39.95 $54.95 $89 $149.95

MAGNETIC V-BLOCKS Features: • Ideal for handling round and irregular shapes for scribing, grinding, measuring and machining • 145 Pounds of powerful holding force • Fine precision ground finish for use as an inspection device Stock No. 900-430 900-432 900-434

Height 27⁄8" 23⁄8" 31⁄16"

Width 21⁄8" 23⁄8" 3"

Length 23⁄4" 5" 4"

Price $49 $59 $79


41

PRECISION 1-2-3 BLOCKS STOCK NO. 900-500 Features:

$25

• Heat treated and case hardened • Precision ground and case hardened on all sides • Squareness of all sides is within .0001” per inch • .0001” TO .0003” over allowance for nominal lapping • Five 3⁄8-16 tapped holes provided for clamping operations • Exremely versatile for precision layout and set-up work • Each set contains two matched blocks

2-4-6- BLOCKS STOCK NO.: 900-501 Features:

$79

• Precision ground and hardened • Blocks are matched within .0002" and measure 2" x 4" x 6" • Flatness: .0001" • Squareness: .0001" • Parallelism: .0003" • Hardness: 55-60 HRC • 5⁄8"-11 tapped holes • Supplied in matched pairs

1-2-3- BLOCK SETS # 900-504 Features:

$35

• Ideal for precision layout and set-up • Precision ground and hardened on all 6 sides • Squareness on all sides to within .0001°± • Oversized to allow for nominal lapping: .0001°± - .0003°± • Supplied in a matched set

Set Includes: • A matched pair of 1-2-3 blocks. • (5) 3/8°±-16 socket head cap screws and hex key in fitted case

cision e r P a r t l U


42

10 PR. PARALLEL SET STOCK NO. 900-600 Features:

$45

• 1⁄8" thick matched pairs • 6" length • Our most popular parallel set, this set includes 10 matched pairs with ultra-accurate dimensions • Made from high quality alloy steel • Hardened and ground • 2 holes in each parallel • Accuracy: +/- 0.0002" parallelism +/- 0.0001" height • Now in molded plastic case!

ULTRA THIN 20-PAIR PARALLEL SET STOCK NO: 900-611

$55

Features: • 1⁄32" thick, 20-pair set • Hardened to 50 HRC. • Parallelism: 0.0001" • Height accuracy: 0.001". • Accuracy: parallelism in height: +- 0.0001" to size in height: +- 0.001" • Range of sizes include: 1⁄2" thru 111⁄16" in 1⁄16" increments • Includes fitted case


43

GAGE BLOCK SETS Features: • Manufactured under carefully controlled conditions allowing for the highest degree of accuracy when used at a temperature of 68 degrees F. (20 C). • All gage block sets are assigned serial numbers and are accompanied with a certificate of inspection listing the deviation for each block • Each gage block set meets or exceeds federal specification GGG-G-15C. • All gage block sets are made to special standards to resist corrosion and defacement • The coefficient of thermal expansion is 6.4 x 10. Stock No. 900-581

Pcs. 81

Grade B

Cert. Deviation

Price $199

0-60° ADJUSTABLE ANGLE BLOCK STOCK NO. 900-806 Features:

$59

• Fast, simple, easy-to-use for: drilling, milling, grinding, and set-up applications • 0-60° adjustments by locking hex screw • Squareness – .0002” • Angle accuracy – +/- 10’ • HRC 50-55 • Shipped in wooden case


44

ROCKWELL TYPE HARDNESS TESTER Features: • Designed for measuring hardness of metals and alloys of all kinds, hard or soft whether flat, round or irregular in shape. • Simple in design and easy to operate, yet sensitive and accurate testing results can be obtained with these testers. • They are ideally suitable for schools, laboratories, tool rooms, inspection and heat treatment departments & factories. • Conforms to IS:3804-1966 and BS:891-1962 part I and part II for Rockwell test.

Standard Accessories:

Loads and Indicators:

3

• 5 ⁄4" Testing Table • 23⁄16" Testing Table • 23⁄16" Testing Table with "V" groove • 120° Diamond Penetrator • 1⁄16" Steel Ball Penetrator • Rockwell A Test Block (1pc.) • Rockwell B Test Block (1pcs.) • Rockwell C Test Blocks (3pcs.) • Screwdriver (1pc.) • Complete Instruction Manual • Dustproof Plastic Cover Stock No. 900-330

Test Ht. 6"

Throat Depth 55⁄16"

• Maximum Load (kgf.): 150 • Load Range (kgf.): 60, 100, 150 • Initial Load Range (kgf.): 10 • Maximum Test Height : 6" • Depth of Throat: 51⁄4" • Max depth of spindle below base: 2" • Size of Base: 7" x 18" • Machine Height: 24.5" • Approximate Net Weight: 150 lbs.

Dim. LxWxH 183⁄8" x 93⁄8" x 2413⁄16"

Price $1195

Refer to our website, www.phase2plus.com for our complete line of hardness testers Scale Indentor A Diamond 120° B

1

Load (kg.) 60

⁄16" Ball

100

C

Diamond 120°

150

D

Diamond 120°

100

E

1

⁄8" Ball

100

F

1

⁄16" Ball

60

G

1

⁄16" Ball

150

H K

1

60 150

⁄8" Ball ⁄8" Ball

1

Application carbides, thin steel, shallow case-hardened steel, case-carburized surfaces aluminum alloys, copper alloys, unhardened steel etc. in rolled, drawn, extruded, or cast metal hard cast irons, pearlitic malleable iron, steel, deep case-hardened steel, titanium pearlitic malleable iron, thin steel, medium case-hardened steel cast iron, aluminum and magnesium alloys, bearing metals thin soft sheet metals, annealed copper alloys copper-nickel-zinc and cupro-nickel alloys, malleable irons lead, zinc, aluminum, magnesium bearing metals, very soft or thin metals

Working Range 40-91 for hardness greater than C65 30-100 for hardness lower than C20 20-70 for material hardier than HRB100 40-77 for intermediate load between A & C scale 50-100 for hardness lower than HRBO 30-100 for hardness lower than HRBO 30-90 for hardness slightly > than 100 upper limit G92 70-100 40-100


45

HARDNESS TESTER ACCESSORIES All blocks are manufactured from the highest quality steel insuring maximum consistency and repeatability. Accuracy exceeds ASTM E10 and E18 standards.

Rockwell Test Blocks Standard Rockwell Test Blocks These blocks meet all ASTM specifications, are precision ground and consistent. Stock No. 900330-9415 900330-9416 900330-9417 900330-9413 900330-9414

Rockwell HRC 25-35 HRC 40-50 HRC 55-65 HRA 75-85 HRB 85-95

Price $24.95 $24.95 $24.95 $24.95 $24.95

Superficial Rockwell Test Blocks Stock No. 900340-9001 900340-9002 900340-9003 900340-9004 900340-9005 900340-9006

Rockwell HR 15N 70-91 HR 30N 42-80 HR 45N 20-70 HR 45T 12-72 HR 30T 43-82 HR 15T 73-93

$35

Rockwell Testing Accessories Diamond Indentors • Our indentors are manufactured from the highest quality industrial diamonds that are precision ground, lapped, and polished. They exceed ASTM standards and have been sold in the US market since 1981. • Precise workmanship ensures exact, dependable readings • Long lifespan Stock No. 900330-9440

Scale “C/A” scale penetrator

Price $135

Carbide Ball Penetrators Ball Penetrators Stock No. Size Scales 900330-9441 1⁄16" B,F, G, T 900330-18 1⁄8" E, H, K,W 900330-14 1⁄4" X 900330-12 1⁄2" Y

Price $89 $89 $99 $109

Anvils Stock No. 900330-9405 900330-9412 900330-9411 900331-9406

Type small flat small V large flat Spot

Price $69 $59 $69 $75

Rockwell/Leeb Impact Type Test Blocks These blocks are used for portable impact (velocity) type hardness testers. Utilizing the Leeb method of testing, these blocks can be certified to NIST upon request. Stock No. PHT1300-01 PHT1100G-01

Rockwell 53-62C 27-62C

LEEB 750-830 550-830

Size 3.5" x 2.1" thick 4.5" x 2.5" thick

Price $129 $275


46

PORTABLE SHORE DUROMETER STOCK NO. 900-335

$175

This shore “A” tester utilizes a 35° blunt taper point to test soft and natural rubber products, as well as products with similar properties.

DIGITAL PROTRACTOR 920-275 Specifications:

$89

• 90 degree x 4 quadrants • Range: 360 degrees • Resolution: 0.1 degree • Accuracy: 0.1 degree • Dimensions: 6”L x 1.2”W x 2”H

Features: • Instant LCD display of level, tilt true vertical or any angle in between to highest accuracy, one tenth of a degree reading. • Deviation from true plane is measurable through full 360 degrees • Reset plus superset calibration modes • Cr2032 button battery incl. • Floating zero • Hold button • On/Off button


47

ULTRA PRECISION MICROMETERS Features: • Carbide faces • Positive locking clamp • Ratchet stop • Hammertone grey enamel finish • Crisp, clear graduations on satin-chrome finish • Includes micrometer standards from 1” & up

INDIVIDUAL MICROMETERS Stock No. 107-001 107-002 107-003 107-004 107-005 107-006 107-007 107-008 107-009 107-010 107-011 107-012

Size 0-1" 1-2" 2-3" 3-4" 4-5" 5-6" 6-7" 7-8" 8-9" 9-10" 10-11" 11-12"±

Graduation .0001" .0001" .0001" .0001" .0001" .0001" .0001" .0001" .0001" .0001" .0001" .0001"

Price $18 $21.75 $23.60 $26.35 $28.55 $30.75 $36.25 $39.55 $42.85 $47.25 $49.45 $54.95

ULTRA-PRECISION SETS Stock No. 107-030 107-031 107-032 107-033 107-034

Size 0-3" 0-4" 0-6" 6-12" 0-12"

Graduation .0001" .0001" .0001" .0001" .0001"

Price $55 $75 $129 $230 $360


48

ELECTRONIC DIGITAL MICROMETERS Features: • Resolution: .0001"/ 0.0001mm • High contrast LCD display • Supplied with standards (2" thru 3") • Carbide tipped measuring faces • Instant Inch/mm Conversion • Function key • Auto zero set/hold • Supplied with fitted case • Uses 1 SR44 battery • Spindle lock switch • RS 232 SPC output Stock No. 103-001 103-002* 103-003* 103-010

Range 0-1” 1-2” 2-3” 0-3” SET

Price $99 $109 $139 $325

*supplied with standard

DIGITAL OUTSIDE MICROMETER Features: • Graduation - .0001" • Accuracy - .0001" • Flatness - .00003" • Parallelism - .00005" • Rapid and simple reading • Carbide faces • Positive locking nut • Anvil and spindle are both hardened and ground • Micro-lap finish on ends • Fast zero adjustment • .250" measuring face • Complete w/ fitted case Stock No. 201-001 201-002* 201-003* 201-103 *supplied with standard

Range 0-1" 1-2" 2-3" 0-3" SET

Price $29 $31 $45 $95


49

DEPTH MICROMETERS Features: • Ratchet stop for consistent and repetitive measurements • 0.157" diameter interchangeable rods, with lapped measuring end, are calibrated and tested at the factory. • The rod length can be adjusted with supplied wrenches to compensate wear on the measuring tip. • Satin chrome finish throughout • Accuracy: +\- 0.0003" • Graduations: +\- 0.001" • Complete with wooden case Stock No. 201-150 201-151 201-152 201-153

Range 0-4" 0-4" 0-6" 0-6"

Base Size 2.5" 4" 4" 2.5"

Price $79 $79 $99 $99

ELECTRONIC DEPTH MICROMETER STOCK NO.: 103-178 Features: • .177” Diameter Interchangeable Rod • 0-6" / 0-152 mm with 4" base • Resolution: .00005"/.001mm • Instant inch/metric conversion • Auto zero-set • SPC output • Min/max values • Hold function • Fitted case

$159


50

INTERCHANGEABLE ANVIL MICROMETERS Features: • Enamel finish • Easy anvil changing • Hardened and fully ground spindle • Ratchet stop thimble • Micro-lapped faces • Supplied with fitted case Stock No. 102-120 102-121

Range 0-6" 6-12"

Graduation .001" .001"

ELECTRONIC INTERCHANGEABLE ANVIL MICROMETER SET Features: • Resolution: .00005"/.001mm • Automatic zero-setting • Instant inch/metric conversion • Furnished with micro-lapped anvils • No change of reading when changing anvils • Spindle lock switch • RS 232 SPC output • Fitted case Stock No. 103-140 103-141

Size 0-6" 6-12"

Price $189 $215

Price $119 $149


51

MULTI ANVIL MICROMETER Features: • Interchangeable anvil permits quick, accurate measuring of tubing • Cylindrical walls form a hole or slot so an edge can be measured, among many other hard to reach locations • Flat and rod anvils furnished • 0-1" multi-anvil, 0.0001" graduation • Fitted case Stock No. 101-100 101-101

Range 0-1" 1-2"

Price $95 $99

BLADE MICROMETER (0-1”) STOCK NO.: 100-031 Features:

$109

• For measurement of keyways, groove diameters of shafts and other hard to reach dimensions • Hardened and lapped blades • Non-rotating spindle • Graduations: .0001"

ELECTRONIC BLADE MICROMETER STOCK NO: 103-130 Features:

$109

• Range: 0-1"/0-25mm • Resolution: .001mm/.0001" • Accuracy: .00015" • Non-rotating spindle • Automatic zero-setting • Instant inch/metric conversion • High contrast LCD display • Carbide-tipped measuring faces • Uses SR 44 battery • Spindle lock switch • RS 232 SPC output • Function/hold key for auto search( min/max) • Measures narrow groove diameters of forming tools, keyways, splines, etc.


52

ELECTRONIC POINT MICROMETER STOCK NO. 103-120 Features:

$129

• Range: 0-1"/0-25mm • For measurement of small grooves, keyways, and other hard to reach surfaces • Resolution: .0001"/.001mm • Accuracy: .00015" • Automatic zero setting • Inch/metric conversion button • High contrast LCD display • Carbide tipped measuring surfaces • Function/hold key for auto search(min/max) • Uses SR44 battery • Spindle lock switch • RS 232 SPC output

DISC TYPE MICROMETER Features: • Measuring discs are hardened, ground and micro-lapped for greater accuracy • Simplifies measuring thickness of difficult , closely spaced items. • Disc flatness: 0.00004" • Extra large disc, .787" and .985" in diameter, with .030" edge thickness to enter narrow recesses • Provided with ratchet stop for constant force • Graduation: .0001" • Supplied with fine fitted case

STOCK NO. 100-021 100-022

CAPACITY

PRICE

0-1” 1-2”

$49 $59


53

ELECTRONIC GEAR-TOOTH MICROMETER STOCK NO. 103-150 Features:

$129

• Resolution: .0001" • Measuring disc is hardened, ground, and micro-lapped • Instant inch/metric conversion • Auto zero-set • Min/max values • High contrast LCD display • Hold function • RS 232 SPC output

MICROMETER STAND STOCK NO.: 100-020 Features:

$13.95

• A heavy micrometer stand made of cast iron that can be adjusted to any position. • It provides a desirable measuring position and angle for inside and outside micrometers and many other instruments.


54

DIGITAL CALIPERS GIANT SCREEN • Inside, outside Measurements • Automatic floating zero • Direct inch/metric conversion • Large, high contrast LCD display • Uses SR44 battery

Features:

• Accuracy: .0008’ under 4” LENGTH / .0012” greater than 4” • Resolution: .0005” (0.01mm) • On/Off Button Stock No. Size 920-296 6” Digital Caliper 920-298 8” Digital Caliper 920-292 12” Digital Caliper

Price $29 $45 $59

FIBER DIGITAL CALIPERS STOCK NO. 920-256 Features: • Resolution: .01”/.1mm • Inside, outside Measurements • Automatic floating zero • Direct inch/metric conversion • Large LCD display • Uses SR44 battery Stock No. 920-256

Size 0-6”/150MM

Price $12.99

HEAVY DUTY DIGITAL CALIPERS With Fine Adjustment Features: • Resolution: .0005” (.01mm) • Manual power on/off • IN/MM conversion • Zero setting at any point • Data Hold Function • Rs-232 output • 24”: Jaw Length- 3.94” • 40”: Jaw Length- 5.91” Stock No. 920-294 920-340

Description 24” Digital Caliper 40” Digital Caliper

Price $279 $599


55

DIAL CALIPERS Features: • Direct reading to .001" on large clear dial/0-100 • Measuring face hardened, precision ground and microlapped for absolute accuracy • Adjusting slide for fine adjustment • Inside, outside, and depth measurements • Satin chrome finish, crisp engraved graduations • Clamp for repetitive setting • Accurate to .001" per 6" • Covered rack • Deluxe case Stock No. 920-216 920-218 920-212

Capacity 6" 8" 12"

Reading .001" .001" .001"

Price $23.75 $39.75 $58.75

PRECISION INCH/METRIC DIAL CALIPERS Features: • Hardened stainless steel • Direct reading to .001"/.02mm on large clear dial • Utilizes two separate needles for inch or metric readings • Precision ground and micro-lapped • Adjusting slide for fine adjustment • Inside, outside, and depth measurements • 0.100" single revolution Stock No. 920-236 920-238 920-232

Size 6"/150mm 8"/200mm 12"/300mm

Price $42 $69 $99


56

HEAVY DUTY VERNIER CALIPERS Features: • Ground and lapped for accuracy • Satin chrome finish • Longer jaws permit greater accessibility • Easy to read, clear, crisp engraved graduations • Adjustable vernier plates Stock No. 202-018 202-024 202-040 202-060

Size 18"x450mm 24"x600mm 40"x1000mm 60"x1500mm

Approx. Jaw Depth 4” 4” 4.590” 6.5”

Grad. .001"/.02mm .001"/.02mm .001"/.02mm .001"/.02mm

DRAFTSMEN STRAIGHT EDGES Features: • Constructed from high quality heat treated steel • Accurate reference line and may be used for checking surfaces for straightness. • Precision ground on one side to .001" • Thickness: 1⁄4" • Convenient hang hole provided on one end • Non graduated • Supplied with quality wood case Stock No. 001-010 001-011

Length 24” 36”

Price $49 $59

Price $65 $75 $239 $459


57

DIGITAL HEIGHT GAGES Features: • Provides highly accurate and repeatable readings • Power on/off • Zero setting at any position • Resolution: .001”/.01mm •Accuracy: +/- .0015” • Inch/metric conversion • Carbide tipped scriber and clamp included Stock No. 210-132 12” Height

Price $229

DUAL BEAM HEIGHT GAGE Features: • Furnished with double digital counter for quick and easy upward and downward readings • The dual directional counter can be zero set individually, and float zero point anywhere within the range • The counter is graduated in .01", while the dial is graduated in .001" • Error proof digital counter comes with zero reset button • Bottom surface of the base is hardened, ground and lapped for maximum flatness • Fine adjusting wheel and lock • Dial graduations – .001" • Available in 3 sizes Stock No. 210-112 210-118 210-124

Description 0-12" travel 0-18" travel 0-24" travel

Price $139 $209 $279


58

DIGITAL ELECTRONIC INDICATORS • Auto power off • Instant inch/metric conversion • Rapid display, search, and hold functions • Zero-setting button • Min/max preset mode • RS 232C interface StockNo. 900-095 900-088

Travel 1 ⁄2" 1 ⁄2"

Grad. .0005" .0001"

Back Lug Lug

Price $69 $99

1” DIGITAL INDICATOR STOCK NO.: 900-085 Features:

$109

• High accuracy & durability due to high precision ball guide • Graduation: .0005” • Measuring Range: +/- .002” • Repeatability: 0.0006” • Constant measuring force over the entire range is accomplished by the built-in compression spring • Adjustable tolerance markers allow easy setting of limits

DIGITAL INDICATOR W/ SWIVEL FACE STOCK NO.: 900-080 Features:

$179

• Extra large LCD • 360 rotation of indicator face • Dual display featuring numerical and electronic scale • Inch/Metric conversion • Relative measurement and absolute measurement • Preset upper limit and lower limit • Data output RS 232 • 1/2” travel • Graduation: .00005”.007mm • Accuracy: 0.0002”0.007mm


59

DIAL INDICATORS Features: • AGD2 Style • No.1 selling dial indicator in USA • Lug back with 1⁄4" hole • Rotational bezel with clamp for easy zero set • Interchangeable hardened contact point • Continuous dial graduation 0-100 • Satin chrome finish Stock No. 900-097 900-098 900-099 900-100 900-101 900-102 900-103

Travel .05" 1 ⁄4" 1" 1 ⁄4" 1 ⁄2" 1" 2"

Graduation .0001" .0005" .0005" .001" .001" .001" .001"

Price $45.00 $18.50 $18.50 $15.00 $15.00 $15.00 $33.00

2” “BIG FACE” DIAL INDICATOR STOCK NO.: 900-090 Features:

$39

• AGD 3 style • With Extra large 3" dial face for easy reading • 2" travel • .001 Graduations • Lug back with 1⁄4" hole • Rotational bezel for easy zero-setting • Interchangeable hardened contact point • Satin-chrome finish

22PC INDICATOR POINT KIT STOCK NO. 900-104

$4.95

• Assorted points that will fit most American and imported dial indicators • AGD specified 4-48 thread • Complete with case


60

DIAL TEST INDICATORS DIAL TEST INDICATORS Stock No. 900-108 900-109

Graduation 0.0005" 0.0001"

Travel 0.030" 0.008"

900-114

Price $40 $65

900-108

BIG FACE DIAL TEST INDICATORS (1.5") Stock No. Grad. 900-114 .01mm/.0005" 900-117 .0005" 900-118 .0005"

Travel .8mm/0.030" 0.030" 0.030"

Desc. Inch/Metric Standard Vertical

Price $49 $45 $55

• Adjustable bezel and dial • “Big face” 11⁄2" Dial face • Fully jeweled movement • 5⁄32" and 3⁄8" mounting shanks • Contact point adjustable through 230° • Supplied in plastic fitted case

DIAL TEST INDICATOR & HOLDER COMBO SETS Stock No. 900-185 900-195 900-119 900-122 900-123

Includes (Indicator/Holder) 900-108/900-105 900-109/900-105 900-114/900-105 900-117/900-105 900-118/900-105

Price $55 $75 $62 $58 $65

900-118

TEST INDICATOR HOLDER STOCK NO.: 900-105 Features:

$15

• Adapts immediately for fast and positive indicating • Suitable for all popular indicators with 5/32" shank or dovetail • Reach from 0-12" diameter • Guaranteed Accurate Readings • 17⁄8" Capacity 900-105


61

DIGITAL TEST INDICATOR STOCK NO. 900-129

$149

The digital test indicator offers easy reading, gear-less measurements in both English and metric display without the need to read a vernier. The easy glide action provides the smoothness and feel to make accurate measurements. Reads to 0.0005” (0.01mm) or 0.0001” (0.001mm) The measurement data can be output to an external data processor. • Inch/Metric conversion with the push of a button • Off/on power button • Zero button • Tolerance button.

GRANITE COMPARATOR STAND STOCK NO. 900-311 STOCK NO. 900-132

$28 $39.99

w/ 1” Dial Indicator Features: • Ideal for use with most accurate dial indicators!! • Microscrew fingertip control • 0.00005" flatness • Full 6" square • 10" height • 2" thick base • Accepts all AGD indicators


62

MAGNETIC BASES Features: • The industry standard! • Superior design, magnetic pull and ease of use, make the Phase II mag bases the best in the business! • Accepts all AGD indicators with lug backs • Accepts dial test indicator stems • Powerful magnetic holding power – 110lbs (50kg) • On/off lever releases magnet, base does not have to be pulled off – no risk of marring polished surfaces • Quick adjustment clamp • Universal adjustment in horizontal and vertical planes Stock No. 900-300 900-301

Style Standard Fine adjustment

900-300

Price $14 $15

900-301

SUPER-PULL MAGNETIC BASE STOCK NO. 900-303 Features:

$37.95

• 175 lbs. pull • Furnished with one main post and two separate posts for maximum flexibility • Accepts all AGD indicators with stems of 5⁄32" & 3⁄8" in diameter

Specifications: • length: 3.45" • width: 1.97" • height: 2.187" • main post: .625" x 7.25" • secondary post: .465" x 6.50" • third post: .390" x 5.875"

900-303

MAGNETIC BASE and DIAL INDICATOR SETS Features: • Your choice of Magnetic Base: Standard, Fine Adjustment, or Super-Pull. • 1" Dial Indicator: .001" Graduation; 0-100 Reading w/ Revolution Counter; Lug-back with 1⁄4" Hole. • Optional 22-pc. indicator point set Stock No. 900-321 900-322 900-323 900-324 900-333 900-334

Mag Base Standard Fine adjustment Fine adjustment Standard Super-pull Super-pull

Ind. 1" 1" 1" 1" 1" 1"

Point Set No No Yes Yes No Yes

Price $26 $27 $30 $29 $47.95 $52.95

900-322


63

FLEX-A-BASE STOCK NO. 900-304

$50

w/ 1” Dial Indicator: STOCK NO. 900-342 Features:

$65

• Flex arm is now made in USA • Stem flexes 360 degrees • Quick locking collar for rigid positioning • Stem components are hardened for rugged use • On/Off lever control • Accepts all AGD indicators

MEGA MAGNETIC BASE STOCK NO. 900-308

$8

w/ 1” Dial Indicator: STOCK NO. 900-380 Features:

$23

• Convenient holding power • Zinc die cast housing • Approximate size - 41⁄2" X 11⁄4" • 5 different locations for mounting accessories

MAGNETIC BACK FOR DIAL INDICATORS STOCK NO. 900 - 306

$10

w/ 1” Dial Indicator: STOCK NO. 900 - 307 Features:

$25

• Permanent, powerful magnet • Size: 2 1/4” Diameter x 9/16” • Attaches to back of indicators

MAGNETIC BED STOCK NO. 900-302 Features: • Post mounts vertically • 8mm x 1.25 thread • Powerful magnetic holding power

$11


64

DIAL BORE GAGES Features: • Used for precise bore measurements, this gage is the perfect instrument for easy set-ups and gaging • Uses a precision Phase II dial indicator for accurate results • Bore depth – 6" • Anvils – 11 Stock No. 900-204 900-214 900-224

Graduations .001" .0005" .0001"

Range 2-6" 2-6" 2-6"

Price $75 $79 $115

DIGITAL BORE GAGES Features: • Same as above models, yet uses a Phase II digital indicator • The advantages of using the electronic indicator include: • Fast & easy inch/metric conversion • No need for revolution counters • Zero-setting function • RS232 output • Rapid display function • Hold function Stock No. 900-274 900-284

Range 2-6" 2-6"

Graduation .0005" .0001"

Price $129 $159

20” REACH DIAL BORE GAGE SET STOCK NO. 900-234 Features:

$141

• Same as above sets but used for deep applications

BORE GAGE COMBO SETS Features: • Used for precise bore measurements, these combo kits are the perfect instrument for easy set-ups and gaging • Choose between our precise dial or digital indicators for greatest accuracy & versatility • Bore depth- 6” • Anvils- 16 Stock No. Graduation 900-244 .0005” Dial 900-246 .0001” Dial 900-248 .0005” Digital 900-250 .0001” Digital

Range 1.4” – 2.4” and 2.0” – 6.0” 1.4” – 2.4” and 2.0” – 6.0” 1.4” – 2.4” 2.0” – 6.0” 1.4” – 2.4” and 2.0” – 6.0”

Price $137 $152 $181 $196


65

RADIUS GAGE SETS Features: • Satin chrome finish • Individually marked • Rust proof steel • Supplied in plastic fitted case

Stock No. 900-314 900-317 900-318 900-320 900-325

Description

Price

25-pc. set 1⁄16"–13⁄16" 26-pc. set .5mm–13mm 8-pc. large 9⁄16–1" 26-pc. set .010"–.500" 8-pc. set 11⁄16"–11⁄2"

$27 $29 $49 $29 $95

TELESCOPING GAGE SET STOCK NO. 900-312 Features:

$20

• Satin chrome finish • Contact points are hardened tool steel and precision ground on the end measuring radius • Rigid handle with self-centering system • Smooth and constant spring tension • Supplied with fitted vinyl case • 6pc set Range: 5 ⁄16"–1⁄2" 1 ⁄2"–3⁄4" 3 ⁄4"–11⁄4" 11⁄4"–21⁄8" 21⁄8"–31⁄2" 31⁄2"–6"


66

3pc PRECISION MACHINIST SET STOCK NO.: 920-101 Features:

$39

• 0-1" Micrometer(.0001" Graduation) • 6" Dial Caliper(.100" rev.; .001 graduation) • 6" 4R Rigid Rule • Comes in fitted plastic case • A great starter set

PROTRACTORS Features: • Graduated from 0-180° • 33⁄8" x 2" head • 6" adjustable arm, with knurled thumb nut Stock No. 920-270 920-271

Type Rectangle Round

Price $8.50 $8.50


67

REFRACTOMETERS COOLANT STYLE

Features: • Accurately measures coolant concentration • Quick and easy procedure • Just a few drops needed for test • Optimize coolant and tool life Stock No. Type 901-101 Synthetics 901-102 Water soluble or synthetics 901-104 Water soluble

Range 0-10%

Price

0-18% 0-32%

$89 $89

$99

Anti-Freeze/Battery Style Features: • 3-Scale refractometer provides direct reading of freezing point of two types of anti-freeze solution or the charge level of battery acid • Precise measurement of freezing point of ethylene glycol or propylene glycol • Simple indication of charge level in battery acid • Just a few drops needed for test • Quick and easy test Stock No. 901-106

Type Prop. glycol/ ethyl glycol/ battery charge

Price $89

DIGITAL REFRACTOMETER COOLANT STYLE

STOCK NO. 901-110 Features:

$550

• Accurately measures coolant concentration • Quick and easy procedure • Just a few drops needed for test • Optimize coolant and tool life • Features automatic temperature compensation • (ATC), which make temperature corrections unnecessary between 32-104 degrees F.

Specifications: • Accuracy: +/- 0.1% +/- 0.00015 • Minimum Division: 0.1% +/-.0001 • Measuring Range: 0-45% Brix • Original Point Setting: 0.1% 1.3330 • Nd 1.3330 – 1.4098


68

OPTICAL COMPARATOR SET 10X Magnification w/ 8 Extra Reticles

STOCK NO.: OCR-1000

$89

Brilliantly clear optics offer undistorted images and highly accurate measurements. The scales are photo-etched into the glass reticles, which get placed in actual contact with the measured object. Perfect for machinists, toolmakers, professionals, lab techs, and more, this portable optical comparator is utilized to check diameters, angles, hole sizes, thread measurements, radii, thickness and many other applications, via interchangeable reticles. Given the ability to be used as a high grade magnifier, this portable comparator set has unlimited applications.

Features: • 10x comparator • 9 Reticles • Fitted case

PORTABLE SHOP MICROSCOPES Specifications: • Graduated from 0-180° • 33⁄8" x 2" head • 6" adjustable arm, with knurled thumb nut MAGNIFICATION Stock No. PSM-040 PSM-060 PSM-100

40X 60X 100X

FOCAL DISTANCE .500”/13MM .387”/10MM .200”/5MM

FIELD OF VIEW .078”/2MM .078”/2MM .039”/1MM

RETICAL SCALE .001”/.02MM .001”/.02MM .0005”/.01MM

Price $120 $125 $130



CATALOGO 2010