Page 1

FAMILY OWNED AND OPERATED SINCE 1933

You Can’t Buy A Better Reel

Washdown • Chemical Transfer • Potable Water Food Processing • Pharmaceuticals & Cosmetics • Fueling Fire Protection • Dairy Operations • Bottling Plants www.hannay.com

Pride in workmanship • Reels built to order • Consistent quality • Service with integrity • Value for your dollar


Hannay hose reels come in all sizes and capacities. Hannay Reels is the leading manufacturer of high quality hose and cable reels for most every conceivable application. This catalog describes and gives specifications on our most popular hose reels. If you don’t see what you’re looking for, give us a call and we will help you meet your needs. Hannay Reels offers Aluminum, Carbon & Stainless Steel construction for most models. Special coatings and finishes are also available.

Reel Selector Chart Reel Type I.D. Hose Sizes Hose Assemblies Hannay Reels Policies Our Guarantee, Service Policy, Paint Notice, Return Goods Policy Spring Rewind Reels Series N500 (high pressure) 1/4" & 3/8" Series N600/600 (dual hose) 1/4"–3/4" Dual Series N700/700 1/4" & 3/8" & 1/2" Series N800/800 3/4" & 1" Series 900 1-1/4" & 1-1/2" Series AG 1/4"–1-1/2" Compact Manual Rewind Reels Series 1000 1/4"–3/8" Power and Manual Rewind Reels Series 1500, 1800 1/4"–3/4" Series 2000 (dual hose), G2000 1/4"–1/2" Dual Series 3000, 3500 (manual only) 3/4"–1-3/4" Series 4000, G4100 3/4"–1" Series 6000 1/2"–1" Series 7000 (dual hose) 3/4"–1" Dual Series 7500 1"–1-1/2" Series 8000 1-1/2"–2" Series 9000 2"–3" Portable Hose Reels Series 1100, AT1200 3/8"–1" Storage Reels Series C1150, ATC1250 16/3–10/3 Series C1500, C3200 1/4"–1-1/2"

Page 3 4

5 6-7 8-9 10-11 12 13-14

Spring Rewind Reels

Power Rewind Reels

15 16-17 18-19 20-21 22-23 24-25 26 27 28-29 30-31 32 33 34-35

Manual Rewind Reels

Lube Reel Chart Reel Type Spring Rewind Reels Series N500 (high pressure) Series N700 Series N800 Series 900 Power Rewind Reels Series 7500

I.D. Hose Sizes

Page

1/4" & 3/8" 3/8" & 1/2" 3/4" & 1" 1-1/4" & 1-1/2"

5 8 10 12

1"–1-1/2"

27

Mounting Hole Sizes N Series Reels — 7/16" x 7/8" running front to back Pressed Frame Reels — 7/16" x 7/8" running left to right Series 1000 — 5/16" x 7/8"

Compact Manual Rewind Reels

Storage Reels

4300-AL Aluminium Hand Cart is available for most models in Series 3000, 3500 and C3200

Series 1500, 1800, 4000, 2000 — 13/32" round holes Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

2 www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

msk@petropump.ru


Complete Reel Packages are also available. For further information refer to our form H-0001-Pkg. Hose Assemblies Allow us to quote the hose along with the reel to simplify your procurement process. Hannay inventories a wide variety of hose assemblies for common applications like general purpose air and water, petroleum products, hydraulics, oxygen/acetylene, breathing air and rescue equipment. Special lengths, fittings and custom application assemblies are usually available in 5 to 10 business days. Beside the ID and Length be sure to know the Temperature Range, Fluid, Working Pressure, and Fitting Specifications for your hose.

Low Pressure Hose We stock a variety of low pressure hose assemblies in several sizes and lengths. We offer hose with EPDM cover and tube and brass fittings which is excellent for air, water and many agricultural chemicals and is recommended for outside usage due to its resistance to heat, sunlight, and weathering. For shop use we offer a hose with high oil resistant tube and cover. It is suitable for use with petroleum based hydraulic fluid, lubricating oil, anti-freeze, diesel fuel, water and air and may be special ordered in several different colors. Hoses for specialty applications are available upon request.

Medium and High Pressure Hose Several different hydraulic and general purpose hose assemblies are offered to meet the specifications of your particular application. We stock an assortment of common sizes to be able meet your needs with a minimum delivery time.

Twin Hydraulic Hose Hannay Reels offers bonded hydraulic hose that helps solve problems associated with unwinding and storing multiple lines. Various options are available not only for hydraulic fluid, but a wide variety of chemicals, agricultural sprays, urethane foam mixers, and fire resistant fluids.

Twin Oxygen/Acetylene Hose. We stock Grade R and Grade T twin hose assemblies in 1/4” & 3/8” in lengths of 50’, 75’ and 100’ which will cover most requirements for oxygen/acetylene as well as Propane and MAPP. For oxygen/acetylene reels see the Hannay Welding Reels Catalog H-0408-W.

Note: All spring rewind reels complete with hose are supplied with appropriate hose stop. (See Ordering & Accessory Guide.)

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

3 msk@petropump.ru


Our Guarantee and Service Policy Equipment manufactured by Hannay Reels, Inc. is guaranteed for two years from date of shipment when installed according to our instructions, given proper care, and used for the purpose for which it is designed. Equipment which proves to be defective upon our inspection will be replaced free of charge, including freight to the customer. Our responsibility ceases upon delivery to any common carrier and we do not, unless previously instructed, insure shipments beyond point of delivery to such carrier. No material will be accepted for return without a return goods authorization. No allowance will be made for labor charges incurred in making exchanges, replacements or repairs. Components (including hose and cable) which are manufactured by other vendors will be subject to the warranty terms of their own manufacturers. Also excluded from the general guarantee are normal wear items (including seals, motor brushes, and paint finish). We reserve the right to modify or alter materials, dimensions, design and construction when necessary to improve the performance of the reel and/or accessories, or to meet delivery requirements. Failure to use a properly sized circuit breaker with any electric rewind motor will void warranty on motor. Failure to use a flexible connector with any live hose reel will void warranty on swivel joint. We expressly disclaim any liability for damage or injuries resulting from the use, operation, service, maintenance or failure of equipment.

Paint Notice To meet the requirements and performance of vehicle and OEM apparatus paints we recommend our reels be painted with the same or equal paint as used on the specific apparatus the reel is being mounted on. Hannay Reels will supply any model or custom reel or part with an automotive primer or rust preventative oil finish upon request, allowing application of final coating at your facility. Or at additional cost Hannay can prime / pre-paint all material before final assembly. In today's regulatory environment this would be the most cost-effective way to meet your finishing standards. Optional finishes are available for various environmental conditions and should be discussed with the factory. Standard finish is oven cured enamel. High performance finishes for demanding and corrosive environments are available at an additional cost. Consult factory for specific requirements.

Return Goods Policy All Hannay Reels are built to order. The parts and components are ordered or placed into production as soon as the order is written. In order to keep the number of returned goods at a minimum, we ask that you use the Hannay Reels Order Worksheet and/or Accessories Order Form when specifying reels with us. These forms can be found in our Ordering and Accessory Guide, H-0415-OA. Be sure to include any size and/or weight limitations for your installation. In the event that an item does need to be returned for credit, repair or replacement, prior approval must be obtained from Hannay Reels, Inc. Upon your request, we will fax a Return Goods Authorization form. A signed copy of this form must accompany the material when returned to us. All material must be returned prepaid, unless otherwise noted on our Return Goods Authorization. No return will be accepted that has been damaged due to improper return packaging, tampered with or altered from its original condition. Equipment specially built to customer specifications and requirements is not subject to cancellation or returnable for credit under any conditions. Our restocking and handling fee is a MINIMUM of 25% for standard catalog reels and parts. No material will be accepted for credit when returned without permission. Orders for equipment incorporating variations from catalog listed items are special and are not subject to return. No allowance will be made for labor or mileage charges incurred in making exchanges, replacements, or repairs.

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

4 www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

msk@petropump.ru


S E R I E S

HIGH PRESSURE SPRING REWIND REELS To handle single 1/4" or 3/8" I.D. hose.

• Compact frame and narrow base. • Non sparking ratchet assembly. • Declutching arbor to prevent damage from reverse winding. • Standard inlet 90° swivel joint 1/4" female NPT threads. 3/8" female NPT threads are optional and must be specified. • Standard outlet is 1/4" female NPT threads. 3/8" female NPT threads are optional and must be specified. • Other threads can be furnished and must be specified. • Standard pressure of 10,000 psi (689 bar), product temperatures from -40° F to +250° F (-40° C to +121° C). Optional 1/4" 3000 psi (207 bar), or 3/8" 3000 psi (207 bar) or 8000 psi (552 bar) are available upon request. • 4-way roller assembly. • Constant Tension is available – consult factory.

Standard Configuration Shown

For: • Chassis Grease • Hydraulics • Air/Water Parts Drawing – ISO 92 Model Number

Hose Capacity of Reel feet m. I.D. (in) I.D. (mm) O.D. (in) O.D. (mm)

N515-14-16-8L N515-16-17-10.5C N515-19-20-10.5J N515-23-24-15.5J

1/4" 6 5/8" 16 25 8 35 11 50 15 75 23

3/8" 10 3/4" 19 25 8 35 11 50 15 75 23

Approx.Weight lb. kg. UPS/ FedEx SHIP Wt. 64* 29 67* 30 81* 37 92* 42

NET 48 22 51 23 63 29 75 34

Standard Roller Assy

Freight SHIP Wt. 83 38 86 39 98 44 110 50

Reel Dimensions*** inches mm.

N203 N203 N203 N203

Notes: A hose stop is necessary on hose to keep spring from unwinding. 1. Specifications subject to change. 2. Reel models and capacities shown are for standard drag applications; for vertical lift applications consult factory. 3. Other sizes, from standard components, available on request. 4. Finish: refer to Page 4. 5. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. * Dimensional weight may apply when shipped as a parcel package (via FedEx or UPS Ground). *** x,y indicate mounting holes. See page 2

SR (STD)

VR (OPT)

C

E

G

H

8 203 10.5 267 10.5 267 15.5 394

17.62 448 18.5 470 20.75 527 23.75 603

16.25 413 17 432 20 508 24 610

9.12 232 9.12 232 10.62 270 12.62 321

B 3 76

C

E

G H

TR (OPT)

X 7 178 A 9 229 F 10.12 257

Y 10 254 D 12 305

Available Roller Positions

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

5 msk@petropump.ru


S E R I E S

SPRING REWIND DUAL HOSE REELS

To handle dual 1/4" through 1/2" I.D. hose. • Narrow frame and compact mounting base. • Non sparking ratchet assembly. • Declutching arbor to prevent damage from reverse winding. • Standard inlets 90° balanced pressure swivel joints 1/2" female NPT threads. • Standard outlets 1/2" female NPT threads. • Pressures to 3000 psi (207 bar) • Temperatures from -60° F to +250° F (-51ºC to +121ºC). • Consult factory for other pressures & temps. • 4-way roller assembly. • Constant Tension is available – consult factory. • Reels for use with oxygen/acetylene. See Series N400 Hannay Reels Welding Catalog H-0408-W.

Optional TR roller position shown

For: • Hydraulics • Air/Water

• Spray Painting

Parts Drawing – ISO 80 Model Number

Hose Capacity of Reel feet m. I.D. (in) I.D. (mm) O.D. (in) O.D. (mm)

N615-19-20-10.5C N617-19-20-10.5J N615-23-24-10.5B N617-25-26-15.5B N617-25-26-15.5A

1/4" 6 5/8" 16 2/35 2/11 2/50 2/15 2/65 2/20 2/75 2/23 2/100 2/31

3/8" 10 3/4" 19 2/35 2/11 2/50 2/15 2/60 2/18 2/75 2/23 2/85 2/26

Approx. Weight lb. kg. 1/2" 13 7/8" 22 2/20 2/6 2/25 2/8 2/30 2/9 2/50 2/15 – –

NET 63 29 66 30 87 40 93 42 120 54

Standard Roller Assy

UPS/ FedEx Freight SHIP SHIP Wt. Wt. 74* 98 34 44 84* 101 38 46 104* 122 47 55 – 128 – 58 – 155 – 70

N203 N205 N203 N205 N205

Reel Dimensions*** inches mm.

A

B

C

E

F

G

H

X

9 229 11 279 9 229 11 279 11 279

3 76 5 127 3 76 5 127 5 127

10.5 267 10.5 267 10.5 267 15.5 394 15.5 394

20.75 527 20.75 527 23.75 603 25.25 641 25.25 641

11.75 298 13.75 349 11.75 298 13.75 349 14.5 368

20 508 20 508 24 610 26 660 26 660

10.62 270 10.62 270 12.62 321 13.62 346 13.62 346

7 178 9 229 7 178 9 229 9 229

Notes: A hose stop is necessary on hose to keep spring from unwinding. 1. Specifications subject to change. 2. Reel models and capacities shown are for standard drag applications; for vertical lift applications consult factory. 3. Other sizes, from standard components, available on request. 4. Finish: refer to Page 4. 5. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. * Dimensional weight may apply when shipped as a parcel package (via FedEx or UPS Ground). *** x,y indicate mounting holes. See page 2

E

B

C

G H

X A F SR (STD)

VR (OPT)

Y 10 254 D 12 305

TR (OPT)

Available Roller Positions

For hydraulic tool circuit applications full flow swivels w/viton seals are recommended (add 2.25 to “F” dim in chart) Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

6 www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

msk@petropump.ru


S E R I E S

SPRING REWIND DUAL HOSE REELS

To handle dual 1/4" through 3/4" I.D. hose. • Rollformed channel frame for heavy duty applications. • Non sparking ratchet assembly. • Declutching arbor to prevent damage from reverse winding. • Standard inlets 90° balanced pressure swivel joints 1/2" female NPT threads. (1” inlet available). • Standard outlets 1/2" female NPT threads. (3/4” outlet available). • Pressures to 3000 psi (207 bar) • Temperatures from -60° F to +250° F (-51ºC to +121ºC). • Consult factory for other pressures & temps. • 4-way roller assembly. • Constant Tension is available – consult factory. • Reels for use with oxygen/acetylene. See Series N400 Hannay Reels Welding Catalog H-0408-W.

Standard Configuration Shown

For: • Hydraulics • Air/Water

• Spray Painting

Parts Drawing – ISO 8 Model Number

Hose Capacity of Reel feet m. I.D. (in) I.D. (mm) O.D. (in) O.D. (mm)

615-23-24-10.5B 617-25-26-15.5B 617-25-26-15.5A † 618-30-31-15.5A

1/4" 6 5/8" 16 2/65 2/20 2/75 2/23 2/100 2/31 – –

3/8" 10 3/4" 19 2/60 2/18 2/75 2/23 2/85 2/26 – –

1/2" 13 7/8" 22 2/30 2/9 2/50 2/15 – – 2/100 2/31

Approx. Weight Standard lb. Roller kg. Assy 3/4" 19 1-9/32" 33 – – – – – – 2/50 2/15

NET

SHIP

53 24 93 42 120 54 130 59

88 40 128 58 155 70 165 75

R203 R205 R205 R206

Reel Dimensions*** inches mm.

A

B

C

D

E

F

G

H

X

Y

8.25 210 10.25 260 10.25 260 11.25 286

3 76 5 127 5 127 6 152

10.5 267 15.5 394 15.5 394 15.5 394

23.25 591 25 635 25 635 28.5 724

24.38 619 26.12 663 26.12 663 29.62 752

13 330 15 381 15.75 400 16.75 425

23.88 607 25.88 657 25.88 657 31.38 797

12.5 318 13 343 13.5 343 16.75 425

3.5 89 5.5 140 5.5 140 6.5 165

20 508 21.75 552 21.75 552 25.25 641

Notes: A hose stop is necessary on hose to keep spring from unwinding. 1. Specifications subject to change. 2. Reel models and capacities shown are for standard drag applications; for vertical lift applications consult factory. 3. Other sizes, from standard components, available on request. 4. Finish: refer to Page 4. 5. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2 NPT threads, standard outlets are 1/2" female NPT threads. † Must specify if 1" joints and 3/4" outlet risers are required.

SR (STD)

VR (OPT)

TR (OPT)

B

C

G H

X

Y

A

D

F

E

Available Roller Positions

For hydraulic tool circuit applications full flow swivels w/viton seals are recommended (add 2.25 to “F” dim in chart) Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

7 msk@petropump.ru


S E R I E S

SPRING REWIND REELS To handle 1/4" through 1/2" I.D. hose.

• Standard N Series has a narrow frame and compact mounting base. • Non sparking ratchet assembly. • Declutching arbor to prevent damage from reverse winding. • Standard inlet 90° balanced pressure swivel joint 1/2" female NPT threads. • Standard outlet 1/2" female NPT threads. • Standard Pressures to 3000 psi (207 bar) (available up to10,000 psi 690 bar). • Temperatures from -60° F to +250° F (-51° C to +121° C). • Consult factory for other pressures & temps. For: • 4-way roller assembly. • Lubrication • Constant Tension is available – consult factory.

Shown with Optional TR Roller Position

• Washdown • Air Tools • General Industrial Applications

• Air/Water • Assembly Operations

Parts Drawing – ISO 79 Model Number

Hose Capacity of Reel feet m. I.D. (in) I.D. (mm) O.D. (in) O.D. (mm)

N716-14-16-8C N716-16-17-10.5C N716-16-17-8L N716-19-20-10.5J N716-23-24-15.5J N716-23-24-15.5G N716-25-26-15.5B N718-25-26-15.5G

1/4" 6 5/8" 16 – – – – – – – – – – 100 30 – – – –

3/8" 10 3/4" 19 25 8 35 11 50† 15 50 15 65 20 75 23 75 23 100 30

Approx. Weight lb. kg. 1/2" 13 7/8" 22 25 8 35 11 50† 15† 50 15 65 20 65 20 75 23 100 30

NET 52 24 55 25 63 29 64 29 79 36 94 43 90 41 96 44

Standard Roller Assy

UPS/ FedEx Freight SHIP SHIP Wt. Wt. 64* 87 29 39 67* 90 30 41 75 105 34 48 82* 99 37 45 86* 114 39 52 101* 129 46 59 – 125 – 57 – 131 – 59

N204 N204 N204 N204 N204 N204 N204 N206

Reel Dimensions*** inches mm.

A

B

C

E

F

G

H

X

10 254 10 254 10 254 10 254 10 254 10 254 10 254 12 305

4 102 4 102 4 102 4 102 4 102 4 102 4 102 6 152

8 203 10.5 267 8 203 10.5 267 15.5 394 15.5 394 15.5 394 15.5 394

17.62 448 18.5 470 18.5 470 20.75 527 23.75 603 23.75 603 25.25 641 25.25 641

11.25 286 11.25 286 11.25 286 11.25 286 11.25 286 11.25 286 11.25 286 13.25 337

16.25 413 17 432 17 432 20 508 24 610 24 610 26 660 26 660

9.12 232 9.12 232 9.12 232 10.62 270 12.62 321 12.62 321 13.62 346 13.62 346

8 203 8 203 8 203 8 203 8 203 8 203 8 203 10 254

Notes: A hose stop is necessary on hose to keep spring from unwinding. 1. Specifications subject to change. 2. Reel models and capacities shown are for standard drag applications; for vertical lift applications consult factory. 3. Other sizes, from standard components, available on request. 4. Finish: refer to Page 4. 5. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. * Dimensional weight may apply when shipped as a parcel package (via FedEx or UPS Ground). *** x,y indicate mounting holes. See page 2 † Capacity based on low pressure air hose only

B

C

E

G H

X A SR (STD)

VR (OPT)

TR (OPT)

Available Roller Positions

F

Y 10 254 D 12 305

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

8 www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

msk@petropump.ru


S E R I E S

SPRING REWIND REELS To handle 1/4" through 1/2" I.D. hose.

For: • Lubrication • Air/Water • Assembly Operations Parts Drawing – ISO 66 Model Number

Standard Configuration Shown

• Washdown • Air Tools • General Industrial Applications

Hose Capacity of Reel feet m. I.D. (in) I.D. (mm) O.D. (in) O.D. (mm)

716-23-24-15.5J 716-23-24-15.5G 716-25-26-15.5B 718-25-26-15.5G 718-30-31-20D

• Rollformed channel frame for heavy-duty applications. • Non sparking ratchet assembly. • Declutching arbor to prevent damage from reverse winding. • Standard inlet 90° balanced pressure swivel joint 1/2" female NPT threads. • Standard outlet 1/2" female NPT threads. • Standard Pressures to 3000 psi (207 bar) (available up to10,000 psi 690 bar). • Temperatures from -60° F to +250° F (-51° C to +121° C). • Consult factory for other pressures & temps. • 4-way roller assembly. • Constant Tension is available – consult factory.

3/8" 10 3/4" 19 65 20 75 23 75 23 100 30 150 46

1/2" 13 7/8" 22 65 20 65 20 75 23 100 30 125 38

Approx. Weight lb. kg.

NET 79 36 94 43 90 41 96 44 127 58

UPS/ FedEx SHIP Wt. 86* 39 102* 46 – – – – – –

Freight SHIP Wt. 114 52 129 59 125 57 131 59 162 73

Standard Roller Assy

R204 R204 R204 R206 R206

Reel Dimensions*** inches mm.

A

B

C

D

E

F

G

H

X

Y

9.25 235 9.25 235 9.25 235 11.25 286 11.25 286

4 102 4 102 4 102 6 152 6 152

15.5 394 15.5 394 15.5 394 15.5 394 20 508

23.25 591 23.25 591 25 635 25 635 28.5 724

24.38 619 24.38 619 26.12 663 26.12 663 29.62 752

12.75 324 12.75 324 12.75 324 14.75 375 15.5 394

23.88 607 23.88 607 25.88 657 25.88 657 31.38 797

12.5 318 12.5 318 13.5 343 13.5 343 17 432

4.5 114 4.5 114 4.5 114 6.5 165 6.5 165

20 508 20 508 21.75 552 21.75 552 25.25 641

B

Notes: A hose stop is necessary on hose to keep spring from unwinding. 1. Specifications subject to change. 2. Reel models and capacities shown are for standard drag applications; for vertical lift applications consult factory. 3. Other sizes, from standard components, available on request. 4. Finish: refer to Page 4. 5. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. * Dimensional weight may apply when shipped as a parcel package (via FedEx or UPS Ground). *** x,y indicate mounting holes. See page 2

C

G H

X

SR (STD)

VR (OPT)

A

Y D

F

E

TR (OPT)

Available Roller Positions

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

9 msk@petropump.ru


S E R I E S

SPRING REWIND REELS To handle 3/4" or 1" I.D. hose.

• Standard N series has a narrow frame and compact mounting base. • Non sparking ratchet assembly. • Declutching arbor to prevent damage from reverse winding. • Standard inlet 90° balanced pressure swivel joint 1" female NPT threads. • Standard outlet 1" female NPT threads. • Pressures to 2000 psi (138 bar). • Temperatures from -40° F to +250° F (-40° C to +121° C). • Consult factory for other pressures & temps. • 4-way roller assembly • Constant Tension is available – consult factory.

Optional TR roller position shown

For: • Fuel Dispensing

• Waste Oil Evacuation • Air/Water

(Consult Factory)

Parts Drawing – ISO 81 Hose Capacity feet m.

Model Number I.D. (in) I.D. (mm) O.D. (in) O.D. (mm) N816-19-20-10.5J N818-23-24-10.5J N816-25-26-10.5B N818-25-26-10.5B

3/4" 19 1-9/32" 33 25 8 50 15 60 18 70 21

Approx. Weight lb. kg. 1" 25 1-9/16" 40 15 5 25 8 35 11 50 15

UPS/ FedEx SHIP Wt. 83* 38 – – – – – –

NET 75 34 87 39 96 44 102 46

Standard Roller Assy

Freight SHIP Wt. 110 50 122 55 131 59 137 62

N204 N206 N204 N206

Reel Dimensions*** in. mm

A

B

C

E

F

G

H

X

10 254 12 305 10 254 12 305

4 102 6 152 4 102 6 152

10.5 267 10.5 267 10.5 267 10.5 267

20.75 527 23.75 603 25.25 641 25.25 641

13 330 15 381 13 330 15 381

20 508 24 610 26 660 26 660

10.62 270 12.62 321 13.62 346 13.62 346

8 203 10 254 8 203 10 254

Notes: A hose stop is necessary on hose to keep spring from unwinding. 1. Specifications subject to change. 2. Reels models and capacities shown are for standard drag applications; for vertical lift applications consult factory. 3. Other sizes, from standard components, available on request. 4. Finish: refer to Page 4. 5. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. * Dimensional weight may apply when shipped as a parcel package (via FedEx or UPS Ground). *** x,y indicate mounting holes. See page 2

B

C

E

G H

X A SR (STD)

VR (OPT)

TR (OPT)

F

Available Roller Positions

Y 10 254 D 12 305

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

10 www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

msk@petropump.ru


S E R I E S

SPRING REWIND REELS To handle 3/4" or 1" I.D. hose.

• Rollformed channel frame for heavy-duty applications. • Non sparking ratchet assembly. • Declutching arbor to prevent damage from reverse winding. • Standard inlet 90° balanced pressure swivel joint 1" female NPT threads. • Standard outlet 1" female NPT threads. • Pressures to 2000 psi (138 bar). • Temperatures from -40° F to +250° F (-40° C to +121° C). • Consult factory for other pressures & temps. • 4-way roller assembly. • Constant Tension is available – consult factory.

Standard Configuration Shown

For: • Fuel Dispensing

• Waste Oil Evacuation • Air/Water

(Consult Factory)

Parts Drawing – ISO 42 Hose Capacity feet m.

Model Number I.D. (in) I.D. (mm) O.D. (in) O.D. (mm) 818-23-24-10.5J 816-25-26-10.5B 818-25-26-10.5B 820-25-26-10.5A 820-30-31-10.5A 820-30-31-15.5A

3/4" 19 1-9/32" 33 50 15 60 18 70 21 85 26 – – 100 30

Approx. Weight lb. kg. 1" 25 1-9/16" 40 25 8 35 11 50 15 75 23 100 30 – –

NET

SHIP

87 39 96 44 102 46 131 59 137 62 145 66

122 55 131 59 137 62 166 75 172 78 180 82

Standard Roller Assy

R206 R204 R206 R308 R308 R308

Reel Dimensions*** in. mm

A

B

C

D

E

F

G

H

X

Y

11.25 286 9.25 235 11.25 286 13.25 337 13.25 337 13.25 337

6 152 4 102 6 152 8 203 8 203 8 203

10.5 267 10.5 267 10.5 267 10.5 267 10.5 267 15.5 394

23.25 591 25 635 25 635 25 635 28.5 724 28.5 724

24.38 619 26.12 663 26.12 663 27 686 30.5 775 30.5 775

15.5 394 13.5 343 15.5 394 18.25 464 18.25 464 18.25 464

23.88 607 25.88 657 25.88 657 25.88 657 31.38 797 31.38 797

12.5 318 13.5 343 13.5 343 13.5 343 17 432 17 432

6.5 165 4.5 114 6.5 165 8.5 216 8.5 216 8.5 216

20 508 21.75 552 21.75 552 21.75 552 25.25 641 25.25 641

Notes: A hose stop is necessary on hose to keep spring from unwinding.

B

1. Specifications subject to change. 2. Reels models and capacities shown are for standard drag applications; for vertical lift applications consult factory. 3. Other sizes, from standard components, available on request. 4. Finish: refer to Page 4. 5. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2

C

G H

X

Y

A SR (STD)

VR (OPT)

TR (OPT)

D F

E

Available Roller Positions

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

11 msk@petropump.ru


S E R I E S

SPRING REWIND REELS To handle 1-1/4" or 1-1/2" I.D. hose.

• Rollformed channel frame construction. • Non sparking ratchet assembly. • Declutching arbor to prevent damage from reverse winding. • Standard inlet 90° swivel joint 1-1/2" female NPT threads and 2" victaulic groove. • Standard outlet 1-1/2" female NPT threads. • Pressures to 600 psi (41 bar) • Temperatures from -60° F to +175° F (-51° C to +79° C). • Consult factory for other pressures & temps. • 4-way roller assembly. • Constant Tension is available – consult factory.

Standard Configuration Shown

For: • Bulk Transfer • Fuel Dispensing

• Suction/Discharge (Consult Factory)

(Consult Factory)

Parts Drawing – ISO 29 Model Number

Hose Capacity of Reel feet m. I.D. (in) I.D. (mm) O.D. (in) O.D. (mm)

922-23-24B 920-25-26A 922-30-31A

1-1/4" 32 1-13/16" 46 40 12 50 15 75 23

1-1/2" 38 2-1/16" 52 25 8 40 12 50 15

Weight lb. kg.

Standard Roller Assy

NET

SHIP

104 47 127 58 156 71

139 63 162 73 191 87

R310 R308 R310

Reel Dimensions*** inches mm.

A

B

D

E

F

G

H

X

Y

15.25 387 13.25 337 15.25 387

10 254 8 203 10 254

23.25 591 25 635 28.5 724

25.25 641 27 686 30.5 775

24 610 22.75 578 24.75 629

23.88 607 25.88 657 31.38 797

12.5 318 13.5 343 17 432

10.5 267 8.5 216 10.5 267

20 508 21.75 552 25.25 641

Notes: A hose stop is necessary on hose to keep spring from unwinding. 1. Specifications subject to change. 2. Reel models and capacities shown are for standard drag applications; for vertical lift applications consult factory. 3. Other sizes, from standard components, available on request. 4. Finish: refer to Page 4. 5. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2

B

C 10.5 267

G H

X

Y

A

D F

SR (STD)

VR (OPT)

E

TR (OPT)

Available Roller Positions

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

12 www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

msk@petropump.ru


S E R I E S

SPRING RETRACTABLE REELS WITH PATENTED AIR SPEED CONTROL GOVERNOR To handle 1/4" through 1-1/2" I.D. hose.

Most Hannay spring reel models are available with an air governor rewind assist, which prevents the hose from winding back onto the reel too quickly. Speed is regulated by restricting air flow through an air governor attached to the rewind mechanism. The result is smooth, controlled rewind speed each and every time. Unlike other speed control mechanisms designed for spring retractable reels, there are 3 major advantages to the Hannay design: 1. Highly scalable – The air speed control governor can be scaled up to regulate speed on even the most powerful spring reels we offer. Other designs can only work on light-duty springs.

AG800

2. Operates in all climates – Because the AG series uses air flow to control speed, (and not hydraulic fluid which can change viscosity depending on temperature), the reel’s rewind speed is controlled and unaffected even by cold weather. 3. Fully adjustable – The end user can turn the air restrictor clockwise or counterclockwise until the optimal rewind speed is found for the application. For further information (other than dimensions) on any of the AG series reels listed below, please go to the following pages in this catalog: • AG600 • AG700 • AG800 • AG900

Series: Series: Series: Series:

Go Go Go Go

to to to to

page page page page

7 (600 Series) 9 (700 Series) 11 (800 Series) 12 (900 Series)

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

13 msk@petropump.ru


S E R I E S

Model Number

Hose Capacity of Reel feet m.

AG615-23-24-10.5B AG617-25-26-15.5B AG617-25-26-15.5A AG618-30-31-15.5A AG716-19-20-10.5J AG716-23-24-15.5J AG716-25-26-15.5B AG718-25-26-15.5G AG718-30-31-20D AG818-23-24-10.5J AG816-25-26-10.5B AG818-25-26-10.5B AG820-25-26-10.5A AG820-30-31-10.5A AG820-30-31-15.5A AG920-25-26A AG922-30-31A

Std Roller Assy

Approx. Weight lb. kg.

I.D. (in) 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 I.D. (mm) 6 10 13 19 25 32 38 NET SHIP O.D. (in) 5/8 3/4 7/8 1-9/32 1-9/16 1-13/16 2-1/16 O.D. (mm) 16 19 22 33 40 46 52 2/65 2/60 2/30 – – – – AG303 117 152 2/20 2/18 2/9 – – – – 53 69 2/75 2/75 2/50 – – – – AG305 118 153 2/23 2/23 2/15 – – – – 54 69 2/100 2/85 – – – – – AG305 145 180 2/30 2/26 – – – – – 66 82 – – 2/100 2/50 – – – AG306 155 190 – – 2/30 2/15 – – – 70 86 – 50 50 – – – – AG304 101 136 – 15 15 – – – – 46 62 – 65 65 – – – – AG304 111 146 – 20 20 – – – – 50 66 – 75 75 – – – – AG304 115 150 – 23 23 – – – – 52 68 – 100 100 – – – – AG306 121 156 – 30 30 – – – – 55 71 – 150 125 – – – – AG306 152 187 – 46 38 – – – – 69 85 – – – 50 25 – – AG306 110 145 – – – 15 8 – – 50 66 – – – 60 35 – – AG304 121 156 – – – 18 11 – – 55 71 – – – 70 50 – – AG306 127 162 – – – 21 15 – – 58 73 – – – 85 75 – – AG308 156 191 – – – 26 23 – – 71 87 – – – – 100 – – AG308 162 197 – – – – 30 – – 73 89 – – – 100 – – – AG308 170 205 – – – 30 – – – 77 93 – – – – – 50 40 AG308 152 187 – – – – – 15 12 69 85 – – – – – 75 50 AG310 181 216 – – – – – 23 15 82 98

Reel Dimensions*** inches mm.

A

B

C

D

E

F

G

H

X

Y

9.25 235 11.25 286 11.25 286 12.25 311 10.25 260 10.25 260 10.25 260 12.25 311 12.25 311 13 331 10.25 260 12.25 311 14.25 362 14.25 362 14.25 362 14.5 362 16.25 413

3 76 5 127 5 127 6 153 4 102 4 102 4 102 6 152 6 152 6 152 4 102 6 152 8 204 8 204 8 204 8 204 10 254

10.5 267 15.5 394 15.5 394 15.5 394 10.5 267 15.5 394 15.5 394 15.5 394 20 508 10.5 267 10.5 267 10.5 267 10.5 267 10.5 267 15.5 394 10.5 267 10.5 267

23.25 591 25 635 25 635 28.5 724 18 457 23.25 591 25 635 25 635 28.5 724 23.25 591 25 635 25 635 25 635 28.5 724 28.5 725 25 635 28.5 724

25.25 641 27 686 27 686 30.5 775 20 508 25.25 641 27 686 27 686 30.5 775 25.25 641 27 686 27 686 27 686 30.5 775 30.5 775 27 686 30.5 775

15.75 400 17.75 451 18.50 470 19.50 495 14.75 375 14.75 375 14 356 16 406 16.75 425 16.75 425 14.75 375 16.75 425 19.5 495 19.5 495 19.5 495 24 610 26 660

23.88 607 25.88 657 25.88 657 31.38 797 19.75 502 23.88 607 25.88 657 25.88 657 31.38 797 23.88 607 25.88 657 25.88 657 25.88 657 31.38 797 31.38 797 25.88 657 31.38 797

12.5 318 13.5 343 13.5 343 17 432 10.5 267 12.5 318 13.5 343 13.5 343 17 432 12.5 318 13.5 343 13.5 343 13.5 434 17 432 17 432 13.5 343 17 432

4.5 114 6.5 165 6.5 165 7.5 190 5.5 139 5.5 139 5.5 139 7.5 190 7.5 190 7.5 190 5.5 140 7.5 190 9.5 241 9.5 241 9.5 241 9.5 241 11.5 292

20 508 21.75 552 21.75 552 25.25 641 14.75 375 20 508 21.75 552 21.75 552 25.25 641 20 508 21.75 552 21.75 552 21.75 552 25.25 641 25.25 641 21.75 552 25.25 641

Notes: A hose stop is necessary on hose to keep spring from unwinding. 1. Specifications subject to change. 2. Reels models and capacities shown are for standard drag applications; for vertical lift applications consult factory. 3. Other sizes, from standard components, available on request. 4. Finish: refer to Page 4. 5. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2.

B

C

G H

Y D E

X A F SR (STD)

VR (OPT)

TR (OPT)

AG800 Shown

Available Roller Positions

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

14 www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

msk@petropump.ru


S E R I E S

COMPACT MANUAL REWIND REELS

To handle single 1/4" or 3/8" I.D. hose.

Standard Configuration Shown

For: • Pressure Washing • Spray Operations

• Washdown • Air

• Lightweight • Compact • Direct crank rewind permanently attached. • Adjustable cam lock brake standard. • Optional pin lock available. • Standard inlet 90° ball bearing swivel joint 1/2" female NPT threads. • Standard outlet 3/8" female NPT threads. • Pressures to 3000 psi (207 bar). • Temperatures from +20° F to +400° F (-7° C to +204° C). • Consult factory for other pressures & temps.

Parts Drawing – ISO 165 Model Number

Hose Capacity of Reel feet m. I.D. (in) I.D. (mm) O.D. (in) O.D. (mm)

1014-14-16 1016-14-16 1020-14-16

1/4" 6 5/8" 16 100 31 150 46 250 76

Approx. Weight Crank Rewind lb. kg. 3/8" 10 3/4" 19 75 23 100 31 175 53

NET 23 10 24 11 25 11

UPS/ FedEx SHIP Wt. 42* 19 42* 19 42* 19

Freight SHIP Wt. 58 26 59 27 60 27

Reel Dimensions*** inches mm.

A

B

F

X

8.12 206 10.12 257 14.12 359

6 152 8 203 12 305

19 483 21 533 25 635

4 102 6 152 10 254

Notes: 1. Specifications subject to change. 2. Other sizes, from standard components, available on request. 3. Finish: refer to Page 4. 4. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. * Dimensional weight may apply when shipped as a parcel package (via FedEx or UPS Ground). *** x,y indicate mounting holes. See page 2

B

C 6 152

E 14 356

G 15.75 400 H 8.75 222

X A F

Y 5.12 130 D 6 152

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

15 msk@petropump.ru


S E R I E S

MANUAL OR POWER REWIND REELS

To handle single 1/4" through 5/8" I.D. hose. • Lightweight compact reels designed for long lengths of hose in manual and power rewind. • Direct crank rewind is permanently attached. • Chain and sprocket drive powered by electric, hydraulic, or compressed air motor. • Manual reels include: cam-lock drag brake, spring actuated pin lock. • Standard inlet 90° ball bearing swivel joint 1/2" female NPT threads. • Standard outlet 1/2" female NPT threads. • Optional Rollers: Specify roller position when ordering. • Pressures to 3000 psi (207 bar) • Temperatures from +20° F to +400° F (-7° C to +204° C). • Consult factory for other pressures & temps.

Electric Rewind Standard Configuration Shown

For: • Lawn Care • Pest Control • Pressure Washing

• Agriculture • Steam Cleaning Optional External Mounting Brackets part no. 9906.0027. Add 2-1/2" to the X dimensions shown in the chart.

Parts Drawing – ISO 90 (power); ISO 179 (manual) Model Number

Hose Capacity of Reel feet m.

For Power Rewind See Note 5 1514-17-18 1520-17-18 1526-17-18 1530-17-18 1536-17-18

I.D. (in) I.D. (mm) O.D. (in) O.D. (mm)

1/4" 6 5/8" 16 175 53 350 107 500 152 – – – –

3/8" 10 3/4" 19 125 38 275 84 400 122 500 152 – –

1/2" 13 7/8" 22 75 23 175 53 300 91 375 114 475 145

Approx. Weight Crank Rewind 3 lb. kg. 5/8" 16 1" 25 50 15 125 38 200 61 275 84 350 107

NET 27 12 29 13 31 14 33 15 35 16

UPS/ FedEx Freight SHIP SHIP Wt. Wt. 65* 62 30 28 80* 64 36 29 98* 66 45 30 110* 68 50 31 129* 70 59 32

Notes: 1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown. 3. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models, does not apply to FedEx or UPS. Net (lbs.)/kg Ship (lbs.)/kg Electric 18/8.2 18/8.2 Hydraulic 15/6.8 15/6.8 Air 15/6.8 15/6.8 * Dimensional weight applies when shipped as a parcel package (via FedEx or UPS Ground). 4. Dimension “F" is the overall length of standard model reels. 5. When ordering power rewind models, prefix model number with: A = Air Rewind E = Electric Rewind HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and 18" air hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 6. Manual rewind available in RT or LB configuations only. 7. Finish: refer to Page 4. 8. Be sure to check dimensions and weights prior to ordering. 9. Some roller options may prohibit the use of our molded chain guard.

Reel Dimensions*** inches mm.

A

B

11 279 17 432 23 584 27 686 33 838

6 152 12 305 18 457 22 559 28 711

E CRANK 16.5 419 16.5 419 16.5 419 16.5 419 16.5 419

E POWER 19 483 19 483 19 483 19 483 19 483

F CRANK 18.5 470 24.5 622 30.5 775 34.5 876 40.5 1029

B

F POWER 16.5 419 22.5 572 28.5 724 32.5 826 38.5 978

X 9.5 241 15.5 394 21.5 546 25.5 648 31.5 800

E C 6 153

G 18.12 460 H 9.88 251

Y 10 254 D 14.5 368

X A F

Crank Rewind Shown

NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

16 www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

msk@petropump.ru


S E R I E S

MANUAL OR POWER REWIND REELS To handle single 5/8" or 3/4" I.D. hose.

For: • Air Compressors • Washdown

• Lightweight compact reels designed for long lengths of hose in manual and power rewind. • Direct crank rewind is permanently attached. • Chain and sprocket drive powered by electric, hydraulic, or compressed air motor. • Manual reels include:cam-lock drag brake, spring actuated pin lock. • Standard inlet 90° ball bearing swivel joint 1" female NPT threads. • Standard outlet 3/4" female NPT threads. • Optional Rollers: Specify roller position when ordering. • Pressures to 2000 psi (138 bar). • Temperatures from -40° F to +250° F (-40° C to +121° C). • Consult factory for other pressures & temps.

Electric Rewind Standard Configuration Shown Optional External Mounting Brackets part no. 9906.0027. Add 2-1/2" to the X dimensions shown in the chart.

Parts Drawing – ISO 136 (power); ISO 180 (manual) Model Number For Power Rewind See Note 5

Hose Capacity of Reel feet m. I.D. (in) I.D. (mm) O.D. (in) O.D. (mm)

1816-17-18 1822-17-18 1826-17-18 1830-17-18 1836-17-18

5/8" 16 1" 25 75 23 150 46 200 61 275 84 350 107

Approx. Weight Crank Rewind 3 lb. kg. 3/4" 19 1-9/32" 40 50 15 100 30 125 38 150 46 200 61

NET 28 13 30 14 32 15 33 15 36 16

UPS/ FedEx SHIP Wt. 80* 36 98* 45 98* 45 110* 50 129* 59

Freight SHIP Wt. 63 29 65 29 67 30 68 31 71 32

Notes: 1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown. 3. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models, does not apply to FedEx or UPS. Net (lbs.)/kg Ship (lbs.)/kg Electric 18/8.2 18/8.2 Hydraulic 15/6.8 15/6.8 Air 15/6.8 15/6.8 * Dimensional weight applies when shipped as a parcel package (via FedEx or UPS Ground). 4. Dimension “F" is the overall length of standard model reels. 5. When ordering power rewind models, prefix model number with: A = Air Rewind E = Electric Rewind HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and 18" air hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 6. Manual rewind available in RT or LB configuations only. 7. Finish: refer to Page 4. 8. Be sure to check dimensions and weights prior to ordering. 9. Some roller options may prohibit the use of our molded chain guard.

Reel Dimensions*** inches mm.

A

B

13 330 19 483 23 584 27 686 33 838

8 203 14 356 18 457 22 559 28 711

E CRANK 16.5 419 16.5 419 16.5 419 16.5 419 16.5 419

E POWER 19 483 19 483 19 483 19 483 19 483

F CRANK 23.38 594 29.38 746 33.38 848 37.38 950 43.38 1102

E

F POWER 18.5 470 24.5 622 28.5 724 32.5 826 38.5 978

11.5 292 17.5 445 21.5 546 25.5 648 31.5 800

B C 6 152 G 18.12 460 H 9.88 251

X

Y 10 254

A

D 14.5 368

F

Power Rewind Shown

NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

www.petropump.ru

X

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

17 msk@petropump.ru


S E R I E S

MANUAL OR POWER REWIND REELS

To handle dual 1/4" through 1/2" I.D. hose. • Two swivel joint inlets and two outlet risers to handle two equal lengths of hose. • Chain-drive crank rewind or chain and sprocket rewind powered by an electric, or compressed air motor. • MX Crank rewind reels pinion brake as standard. • Power rewind reels are not supplied with a brake. • Standard inlets 90° ball bearing swivel joints 1/2" female NPT threads. For: • Standard outlets 1/2" female NPT threads. • Hydraulics • Pressures to 3000 psi (207 bar). • Air/Water • Temperatures from +20° F to +400° F (-7° C to +204° C). • Consult factory for other pressures & temps. • Reels for use with oxygen/acetylene. See Series 2400 Hannay Reels Welding Catalog H0408-W.

Standard Configuration Shown

• Spray Painting Optional External Mounting Brackets part no. 9906.0027. Add 2-1/2" to the X dimensions shown in the chart.

Parts Drawing – ISO 112 Model Number

Hose Capacity of Reel feet m.

For Power Rewind See Note 5 2016-17-18 2020-17-18 2026-17-18 2030-17-18 2036-17-18

I.D. (in) I.D. (mm) O.D. (in) O.D. (mm)

1/4" 6 5/8" 16 2/100 2/31 2/175 2/53 2/275 2/84 2/350 2/107 2/425 2/130

Notes:

3/8" 10 3/4" 19 2/75 2/23 2/125 2/38 2/200 2/61 2/250 2/76 2/300 2/91

Approx. Weight Crank Rewind 3 lb. kg. 1/2" 13 7/8" 22 2/50 2/15 2/75 2/23 2/125 2/38 2/175 2/53 2/225 2.69

NET 32 15 34 15 36 16 37 17 39 18

UPS/ FedEx SHIP Wt. 80* 36 98* 45 110* 50 129* 59 129* 59

Freight SHIP Wt. 67 30 69 31 71 32 72 33 74 34

Reel Dimensions*** inches mm.

A

B

13 330 17 432 23 584 27 686 33 838

8 203 12 305 18 457 22 559 28 711

E CRANK 18.5 470 18.5 470 18.5 470 18.5 470 18.5 470

E POWER 19 483 19 483 19 483 19 483 19 483

B

F CRANK 21 533 25 635 31 787 35 889 41 1041

F POWER 20 508 24 610 30 762 34 864 40 1016

X 11.5 292 15.5 394 21.5 546 25.5 648 31.5 800

E

1. Specifications subject to change. C 2. Upon request, reels can be supplied with drum lengths other than shown 6 152 and with disc sizes in other diameters. 3. Weights shown in chart are for crank rewind models. ADD these amounts for G power rewind models, does not apply to FedEx or UPS. 18.12 460 Net (lbs.)/kg Ship (lbs.)/kg H Electric 18/8.2 18/8.2 9.88 251 Air 15/6.8 15/6.8 * Dimensional weight applies when shipped as a parcel package (via FedEx or UPS Ground). X 4. Dimension “F" is the overall length of standard model reels. MX chain drive Y 10 crank models, reels require 2" clearance to remove crank handle. A 254 5. When ordering, prefix model number with: D F 14.5 A = Air Rewind E = Electric Rewind 368 Power Rewind Shown MX = Chain Drive Crank (Air rewind reels are supplied with control valve and 18" air hose; NOTICE: A Flexible Connector must be used between the inlet pipe and 12v and 24v DC rewind reels are supplied with switch and solenoid; the inlet swivel joint. 115v AC rewind reels are not supplied with switch but can be ordered *** x,y indicate mounting holes. See page 2 separately.) 6. Finish: refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering. 8. Some roller options may prohibit the use of our molded chain guard. Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com 18

www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

msk@petropump.ru


S E R I E S

MANUAL REWIND REELS To handle dual 1/4" through 1/2" I.D. hose.

For: • Hydraulics • Air/Water

Standard Gear Driven Crank Rewind Shown

• Spray Painting

Optional External Mounting Brackets part no. 9906.0027. Add 2-1/2" to the X dimensions shown in the chart.

• Two swivel joint inlets and two outlet risers to handle two equal lengths of hose. • Gear-drive crank rewind. • Pinion brake as standard. • Standard inlets 90° ball bearing swivel joints 1/2" female NPT threads. • Standard outlets 1/2" female NPT threads. • Pressures to 3000 psi (207 bar). • Temperatures from +20° F to +400° F (-7° C to +204° C). • Consult factory for other pressures & temps. • For power rewind see Series 2000, pg. 16. • Reels for use with oxygen/acetylene. (See Welding Catalog H-0408-W).

Parts Drawing – ISO 205 Model Number

Hose Capacity of Reel feet m. I.D. (in) I.D. (mm) O.D. (in) O.D. (mm)

G2016-17-18-8 G2020-17-18-8 G2026-17-18-8

1/4" 6 5/8" 16 2/75 2/23 2/125 2/38 2/200 2/61

3/8" 10 3/4" 19 2/50 2/15 2/100 2/31 2/150 2/46

Approx. Weight Crank Rewind lb. kg. 1/2" 13 7/8" 22 2/35 2/11 2/50 2/15 2/100 2/31

NET 40 15 42 18 44 19

UPS/ FedEx SHIP Wt. 80* 36 98* 45 110* 50

Reel Dimensions*** inches mm.

Freight SHIP Wt. 75 34 77 35 79 36

A

B

F

X

13 330 17 432 23 584

8 203 12 305 18 457

21 533 25 635 31 787

11.5 292 15.5 394 21.5 546

Notes: 1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown. 3. Finish: refer to Page 4. 4. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. * Dimensional weight applies when shipped as a parcel package (via FedEx or UPS Ground). *** x,y indicate mounting holes. See page 2

E 18.5 470

B

C 8 203

G 18.2 460 H 9.88 251

X A F

Y 10 254 D 14.5 368

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

19 msk@petropump.ru


S E R I E S

MANUAL REWIND REELS To handle 3/4" or 1" I.D. hose.

• Economical manual rewind reels for long lengths of hose. • Choose disc rewind or removable direct crank rewind. • Supplied with spring-actuated pin lock. • Standard inlet 90° ball bearing swivel joint 1" female NPT threads. • Standard outlet 1" female NPT thread. • Optional bronze or aluminum swivel joint and stainless steel hub assembly and riser, are available • Optional Rollers may be purchased. • Pressures to 2000 psi (138 bar). • Temperatures from -60° F to +250° F (-51° C to +121° C). • Consult factory for other pressures & temps.

Hose Capacity of Reel feet m.

I.D. (in) I.D. (mm) O.D. (in) O.D. (mm) 3016-25-26 3020-25-26 3024-25-26 3028-25-26

Round Hose 3/4" 1" 19 25 1-9/32" 1-9/16" 33 40 100 50 30 15 150 100 46 30 250 150 76 46 300 200 91 61

For: • Fuel Dispensing (Consult Factory)

Optional Aluminum Hand Cart 4300-AL Mounting Available, see page 2

Parts Drawing – ISO 113 Model Number

Standard with Crank Handle

• Spray Operations • Fire Protection

Approx. Weight Crank Rewind lb. kg. Collapsible Hose 1" 25 1/2"x1-3/4" 13 x 44 200 61 300 91 400 122 550 168

Reel Dimensions*** inches mm.

NET

SHIP

A

B

F

X

85 39 94 43 103 47 113 51

120 54 129 59 138 63 155 70

13 330 17 432 21 533 25.5 648

7.5 191 11.5 292 15.5 394 20 508

23.75 603 27.75 705 31.75 806 36.25 921

7.75 197 9 229 13 330 17.5 445

Notes: 1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 3. Power rewind NOT available on these models. 4. Dimension “F” is the overall length of standard model reels. Crank rewind models, 3–1/2" clearance required to remove crank. 5. Subtract 5" from ‘F’ dimension for disc rewind models. 6. Finish: Call factory for offshore/marine finish, available at extra cost. Refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2

E 24.75 629

B

G 27.88 708

C 10.5 267

H 15.5 394

Y 21.75 552 D 25.5 648

X A F

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

20 www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

msk@petropump.ru


S E R I E S

MANUAL REWIND REELS To handle 1" through 1–3/4" I.D. hose.

• Economical manual rewind reels for long lengths of hose. • Choose disc rewind or removable direct crank rewind. • Supplied with spring-actuated pin lock. • Standard inlet 90° swivel joint 1-1/2" female NPT threads and 2" victaulic groove. • Standard outlet flanged riser with 1-1/2" female NPT threads. • Optional bronze or aluminum swivel joint and stainless steel hub assembly and riser, are available • Optional Rollers may be purchased. • Pressures to 600 psi (41 bar) • Temperatures from -60° F to +175° F (-51° C to +79° C). • Consult factory for other pressures & temps.

Standard with Crank Handle

For: • Fuel Dispensing (Consult Factory)

• Bulk Transfer • Fire Protection

Optional Aluminum Hand Cart 4300-AL Mounting Available, see page 2

Parts Drawing – ISO 111 Model Number

Hose Capacity of Reel feet m.

I.D. (in) I.D. (mm) O.D. (in) O.D. (mm) 3516-25-26 3520-25-26 3524-25-26 3528-25-26 3524-30-31 3528-30-31 3534-30-31 3530-33-34

Round Hose 1" 1-1/2" 25 38 1-9/16" 2-1/16" 40 52 50 – 15 – 100 50 30 15 150 75 46 23 200 100 61 30 200 100 61 30 250 150 76 46 350 200 107 61 400 250 122 76

Collapsible Hose 1-1/2" 1-3/4" 38 44 3/4"x3" 7/8"x3-1/4" 19 x 76 22 x 83 50 50 15 15 100 75 30 23 150 100 46 30 200 150 61 46 250 150 76 46 300 250 91 76 450 350 137 107 450 350 137 107

Approx. Weight Crank Rewind lb. kg.

Reel Dimensions*** inches mm.

NET

SHIP

A

B

E

F

G

H

X

95 43 104 47 113 51 123 56 124 56 134 61 147 67 138 63

130 59 139 63 157 71 173 78 174 79 184 83 197 89 188 85

13 330 17 432 21 533 25.5 648 21 533 25.5 648 31.5 800 27.5 699

7.5 191 11.5 292 15.5 394 20 508 15.5 394 20 508 26 660 22 559

24.75 629 24.75 629 24.75 629 24.75 629 28.75 730 28.75 730 28.75 730 31.75 806

26 660 30 762 34 864 38.5 978 34 864 38.5 978 44.5 1130 40.5 1029

27.88 708 27.88 708 27.88 708 27.88 708 29.88 759 29.88 759 29.88 759 32.38 822

15.5 394 15.5 394 15.5 394 15.5 394 15.5 394 15.5 394 15.5 394 16.5 419

7.75 197 9 229 13 330 17.5 445 13 330 17.5 445 23.5 597 19.5 495

E

Notes: 1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 3. Power rewind NOT available on these models. 4. Dimension “F” is the overall length of standard model reels. Crank rewind models, 3–1/2" clearance required to remove crank. 5. Subtract 5" from ‘F’ dimension for disc rewind models. 6. Finish: Call factory for offshore/marine finish, available at extra cost. Refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2

B

G

C 10.5 267

H

Y 21.75 552 D 25.5 648

X A F

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

21 msk@petropump.ru


S E R I E S

MANUAL OR POWER REWIND REELS To handle single 3/4" or 1" I.D. hose.

• Lightweight compact reels designed for long lengths of hose in manual and power rewind. • Direct crank rewind is removable. • Chain and sprocket drive powered by electric, hydraulic, or compressed air motor. • Manual reels include: cam-lock drag brake, spring actuated pin lock. • Comet brake is standard on power rewind reels. • Standard inlet 90° ball bearing swivel joint 1" female NPT threads. • Standard outlet 1" female NPT threads. • Optional Rollers: Specify roller position when ordering. • Pressures to 2000 psi (138 bar). • Temperatures from -60° F to +250° F (-51° C to +121° C). • Consult factory for other pressures & temps.

Electric Rewind Standard Configuration Shown

For: • Fuel Dispensing

• Water Supply • Chemical Transfer

(Consult Factory)

• Fire Protection

Optional External Mounting Brackets part no. 9906.0027. Add 2-1/2" to the X dimensions shown in the chart.

Parts Drawing – ISO 68 Model Number

Hose Capacity of Reel feet m.

For Power Rewind See Note 5

I.D. (in) I.D. (mm) O.D. (in) O.D. (mm)

4018-17-18 4024-17-18 4030-17-18 4038-17-18

3/4" 19 1-9/32" 33 50 15 100 30 150 46 200 61

Approx. Weight Crank Rewind 3 lb. kg.

1" 25 1-9/16" 40 35 11 50 15 75 23 100 30

NET 36 16 46 21 57 26 70 32

UPS/ FedEx SHIP Wt. 80* 36 98* 45 110* 50 – –

Freight SHIP Wt. 71 32 81 37 92 42 124 56

Notes: 1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown. 3. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models, does not apply to FedEx or UPS. Net (lbs.)/kg Ship (lbs.)/kg Electric 18/8.2 18/8.2 Hydraulic 15/6.8 15/6.8 Air 15/6.8 15/6.8 * Dimensional weight applies when shipped as a parcel package (via FedEx or UPS Ground). 4. Dimension “F" is the overall length of standard model reels. Crank rewind reels require 3–1/2" clearance to remove or install crank handle. 5. When ordering power rewind models, prefix model number with: A = Air Rewind E = Electric Rewind HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and 18" air hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 6. Finish: refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering. 8. Some roller options may prohibit the use of our molded chain guard. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2, also for external mounting brackets.

Reel Dimensions*** inches mm.

A

B

15 381 21 533 27 686 35 889

10 254 16 406 22 559 30 762

E CRANK 16.5 419 16.5 419 16.5 419 16.5 419

E POWER 19 483 19 483 19 483 19 483

F CRANK 27 686 33 838 39 991 47 1194

E

F POWER 20.5 521 26.5 673 32.5 826 40.5 1029

X 13.5 343 19.5 495 25.5 648 33.5 851

B C 8 203 G 18.12 460 H 9.88 251

X

Y 10 254 D 14.5 368

A F

Power Rewind Shown

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

22 www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

msk@petropump.ru


S E R I E S

MANUAL OR POWER REWIND REELS To handle single 3/4" or 1" I.D. hose. Electric Rewind Shown with Gear Driven Crank Rewind

For: • Fuel Dispensing

• Fire Protection • Water Supply • Chemical Transfer

(Consult Factory)

• Lightweight compact reels designed for long lengths of hose in manual and power rewind. • Gear driven crank rewind handle is removable. • Chain and sprocket drive powered by electric, hydraulic, or compressed air motor. • Gear driven crank rewind, adjustable pinion brake. • Standard inlet 90° ball bearing swivel joint 1" female NPT threads. • Standard outlet 1" female NPT threads. • Optional Rollers: Specify roller position when ordering. • Pressures to 2000 psi (138 bar). • Temperatures from -60° F to +250° F (-51° C to +121° C). • Consult factory for other pressures & temps.

Parts Drawing – ISO 206 Model Number For Power Rewind See Note 5

Hose Capacity of Reel feet m. I.D. (in) I.D. (mm) O.D. (in) O.D. (mm)

4118-17-18 4124-17-18 4130-17-18 4138-17-18

3/4" 19 1-9/32" 33 50 15 100 30 150 46 200 61

1" 25 1-9/16" 40 35 11 50 15 75 23 100 30

Approx. Weight Crank Rewind 3 lb. kg.

Reel Dimensions*** inches mm.

NET

SHIP

A

B

62 28 72 33 83 38 96 44

97 44 107 49 118 54 131 59

15 381 21 533 27 686 35 889

10 254 16 406 22 559 30 762

Notes:

E CRANK 18 457 18 457 18 457 18 457

E POWER 20.5 521 20.5 521 20.5 521 20.5 521

F

X

21.5 546 27.5 699 33.5 851 41.5 1054

7.5 190 13.5 343 19.5 495 27.5 698 B

E

1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown. 3. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models: Net (lbs.)/kg Ship (lbs.)/kg Electric 18/8.2 18/8.2 Hydraulic 15/6.8 15/6.8 Air 15/6.8 15/6.8 4. Dimension “F" is the overall length of standard model reels. 5. When ordering power rewind models, prefix model number with: A = Air Rewind E = Electric Rewind HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and 18" air hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 6. Finish: refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2

C 8 203 G 18.12 460 H 9.88 251

Y 12.5 318 D 15.5 394

X A F

Power Rewind Shown

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

23 msk@petropump.ru


S E R I E S

MANUAL OR POWER REWIND REELS To handle single 1/2" through 1" I.D. hose.

• Heavy-duty reel for longer lengths of hose. • Choose Gear-driven crank rewind or chain and sprocket drive powered by an electric, hydraulic or compressed air motor. • Crank rewind reels supplied with pinion brake, power rewind reels with a comet brake. • Standard inlet a 90° ball bearing swivel joint 1" female NPT threads. • Standard outlet 1" female NPT threads. • Standard inlet, outlet riser and hub assembly are steel. Optional bronze or aluminum swivel joint and stainless steel hub assembly and riser, are available. • Optional Rollers may be purchased. • Pressures to 2000 psi (138 bar). • Temperatures from -60° F to +250° F (-51° C to +121° C). • Consult factory for other pressures & temps. • Chainguard available upon request, must be specified.

Optional Auxiliary Rewind

Electric Rewind Standard Configuration Shown

For: • Fuel Dispensing (Consult Factory)

• Spray Operations

• Fire Protection • Water Blasting* • Sewer Cleaning*

*Heavy-duty construction required. Consult factory.

Shown with optional Assembly C Roller Top Wind

Ring and pinion shaft rewind unit with removable crank handle

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

24 www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

msk@petropump.ru


S E R I E S

Parts Drawing – ISO 84 Model Number For Power Rewind See Note 4

Hose Capacity of Reel feet m. I.D. (in) I.D. (mm) O.D. (in) O.D. (mm)

6024-19-21 6032-19-21 6024-23-24 6030-23-24 6038-23-24 6016-25-26 6022-25-26 6028-25-26 6018-30-31 6024-30-31 6028-30-31 † 6030-30-31 † 6028-33-34

1/2" 13 7/8" 22 235 72 350 107 450 137 – – – – 285 87 500 152 – – 450 137 – – – – – – – –

3/4" 19 1-9/32" 33 125 38 200 61 185 56 250 76 350 107 100 30 200 61 300 91 235 72 400 122 500 152 550 168 600 183

Approx. Weight Crank Rewind 3 lb. kg. 1" 25 1-9/16" 40 60 18 100 30 100 30 150 46 200 61 60 18 100 30 200 61 135 41 200 61 265 81 300 91 350 107

Reel Dimensions*** inches mm.

NET

SHIP

A

B

D

E

85 39 102 46 92 42 105 48 120 54 88 40 100 45 113 51 101 46 113 51 121 55 125 57 129 59

127 58 144 65 134 61 147 67 162 73 130 59 142 64 155 70 151 68 163 74 171 78 175 79 179 81

21 533 29.5 749 21 533 27.5 699 35 889 13 330 19 483 25.5 648 15 381 21 533 25.5 648 27.5 699 25 635

15.5 394 24 610 15.5 394 22 559 29.5 749 7.5 191 13.5 343 20 508 9.5 241 15.5 394 20 508 22 559 20 508

20.5 521 20.5 521 20.5 521 20.5 521 20.5 521 25.5 648 25.5 648 25.5 648 25.5 648 25.5 648 25.5 648 25.5 648 31.5 800

18.75 476 18.75 476 22.75 578 22.75 578 22.75 578 24.75 629 24.75 629 24.75 629 28.75 730 28.75 730 28.75 730 28.75 730 31.75 806

F F CRANK POWER 25.38 28.5 645 724 33.88 37 861 940 25.38 28.5 645 724 31.88 35 810 889 39.38 42.5 1000 1080 17.38 20.5 441 521 23.38 26.5 594 673 29.88 33 759 838 19.38 22.5 492 572 25.38 28.5 645 724 29.88 33 759 838 31.88 35 810 889 29.62 32.75 752 832

Notes: Specifications subject to change. 1. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 2. Dimensions shown for reels up to and including 30-31 disc size reflect pressed frames. All others are rollformed channel frames. 3. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models: Net (lbs.)/kg Ship (lbs.)/kg Electric 1/2 HP 40/18.1 40/18.1 Hydraulic 20/9.1 20/9.1 Air 20/9.1 20/9.1 4. When ordering power rewind models, prefix model number with: A = Air Rewind EP = Electric Rewind (1/2 hp) HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and 18" air hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 5. Finish: refer to Page 4. 6. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2 † Some applications require a clutch/reduction unit.

G

H

X

Y

21.5 546 21.5 546 23.5 597 23.5 597 23.5 597 27.88 708 27.88 708 27.88 708 29.88 759 29.88 759 29.88 759 29.88 759 33.62 854

12.12 308 12.12 308 12.12 308 12.12 308 12.12 308 15.5 394 15.5 394 15.5 394 15.5 394 15.5 394 15.5 394 15.5 394 17.75 451

13 330 21.5 546 13 330 19.5 495 27 686 7.75 197 11 279 17.5 445 7 178 13 330 17.5 445 19.5 495 17.5 445

16.75 425 16.75 425 16.75 425 16.75 425 16.75 425 21.75 552 21.75 552 21.75 552 21.75 552 21.75 552 21.75 552 21.75 552 27.75 705

E

B

C 10.5 267

G H

X A F

Y D Power Rewind Shown

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

25 msk@petropump.ru


S E R I E S

DUAL HOSE REELS MANUAL OR POWER REWIND To handle dual 3/4" or 1" I.D. hose.

• Two swivel joint inlets and two outlet risers to handle two equal lengths of hose. • Choose gear-driven crank rewind or chain & sprocket drive powered by an electric, hydraulic or compressed air motor. An auxiliary rewind is standard. • Crank rewind and power rewind reels, pinion brake standard. • Standard inlets 90° ball bearing swivel joints 1" female NPT threads. • Standard outlets 1" female NPT threads. • Standard inlet, outlet riser and hub assembly are steel. Optional bronze or aluminum swivel joint and stainless steel hub assembly and riser, are available. • Pressures to 2000 psi (138 bar). • Temperatures from -60° F to +250° F (-51° C to +121° C). • Consult factory for other pressures & temps, optional chainguard. Model Number

Hose Capacity of Reel feet m.

For Power Rewind See Note 5

I.D. (in) I.D. (mm) O.D. (in) O.D. (mm)

7024-19-21 7026-23-24 7016-25-26 7032-25-26 † 7032-30-31 † 7024-33-34 † 7032-33-34

3/4" 19 1-9/32" 33 2/60 2/18 2/90 2/27 2/40 2/12 2/175 2/53 2/300 2/91 2/225 2/69 2/350 2/107

For: • Hydraulics • Dual Agents

Parts Drawing – ISO 72

Approx. Weight Crank Rewind 4 lb. kg. 1" 25 1-9/16" 40 2/25 2/8 2/50 2/15 2/30 2/9 2/100 2/31 2/150 2/46 2/115 2/35 2/200 2/61

Reel Dimensions*** inches mm.

NET

SHIP

A

B

D

E

100 45 105 48 95 43 129 59 137 62 120 54 137 62

142 64 147 67 145 66 179 81 187 85 170 77 187 85

21 533 23 584 13 330 29.5 749 29.5 749 20.5 521 29 737

15.5 394 17.5 445 7.5 191 24 610 24 610 15.5 394 24 610

20.5 521 20.5 521 25.5 648 25.5 648 25.5 648 31.5 800 31.5 800

21.88 556 23 584 24.75 629 24.75 629 28.75 730 31.75 806 31.75 806

Notes: 1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 3. Dimensions shown up to and including 30-31 disc size reflect pressed frames. All others are rollformed channel frames. 4. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models: Net (lbs.)/kg Ship (lbs.)/kg Electric 40/18.1 40/18.1 Hydraulic 20/9.1 20/9.1 Air 20/9.1 20/9.1 5. When ordering, prefix model number with: A = Air Rewind EP = Electric Rewind MX = Chain Drive Crank HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and 18" air hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 6. Finish: refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering.

Standard Configuration Shown

F F CRANK POWER 29.75 32.12 756 816 31.75 34.12 806 867 21.75 24.12 552 613 38.25 40.62 972 1032 38.25 40.62 972 1032 29.75 32.12 756 816 38.25 40.62 972 1032

B

C 10.5 267

G

H

X

Y

21.5 546 23.5 597 27.88 708 27.88 708 29.88 759 33.62 854 33.62 854

12.12 308 12.12 308 15.5 394 15.5 394 15.5 394 17.75 451 17.75 451

13 330 15 381 7.75 197 21.5 546 21.5 546 13 330 21.5 546

16.75 425 16.75 425 21.75 552 21.75 552 21.75 552 27.75 705 27.75 705

E

G H

X A

Y D

F

Power Rewind Shown

NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2 † Some applications require a clutch/reduction unit.

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

26 www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

msk@petropump.ru


S E R I E S

MANUAL OR POWER REWIND REELS

To handle single 1" through 1-1/2" I.D. hose. Standard Configuration Shown

For: • Fuel Dispensing (Consult Factory)

• Bulk Transfer • Suction/Discharge (Consult Factory)

Optional Auxilary Rewind (Ring and pinion shaft rewind unit with removable crank handle)

Parts Drawing – ISO 18 Model Number For Power Rewind See Note 5

Hose Capacity of Reel feet m. I.D. (in) I.D. (mm) O.D. (in) O.D. (mm)

7528-19-21 7538-23-24 7520-25-26 7528-25-26 7522-30-31 † 7528-30-31 † 7526-33-34

1" 25 1-9/16" 40 85 26 200 61 115 35 200 61 190 58 285 87 335 102

1-1/4" 32 1-13/16" 46 70 21 190 58 75 23 135 41 160 49 260 79 200 61

• Heavy-duty reel designed for longer lengths. • Choose gear-driven crank rewind or chain and sprocket drive powered by an electric, hydraulic or compressed air motor. • Crank rewind reels supplied with pinion brake and power rewind reels with a comet brake. • Standard inlet 90° ball bearing swivel joint 1-1/2" female NPT threads and 2" victaulic groove. • Standard outlet flanged riser 1-1/2" female NPT threads. • Standard inlet, outlet riser and hub assembly are steel. Optional bronze or aluminum swivel joint and stainless steel hub assembly and riser, are available. • Rollers may be purchased as accessory items. • Operate at pressures to 600 psi (41 bar). • Temperatures from -60° F to +175° F (-51° C to +79° C). • Consult factory for other pressures & temps, optional chainguard.

Approx. Weight Crank Rewind 4 lb. kg. 1-1/2" 38 2-1/16" 52 50 15 100 30 50 15 100 30 100 30 160 49 200 61

Reel Dimensions*** inches mm.

NET

SHIP

A

B

D

E

104 47 130 59 106 48 123 56 118 54 131 59 133 60

146 66 172 78 148 67 165 75 168 76 181 82 183 83

25.5 648 35 889 17 432 25.5 648 19 483 25.5 648 22.5 572

20 508 29.5 749 11.5 292 20 508 13.5 343 20 508 17.5 445

20.5 521 20.5 521 25.5 648 25.5 648 25.5 648 25.5 648 31.5 800

18.75 476 22.75 578 24.75 629 24.75 629 28.75 730 28.75 730 31.75 806

Notes:

1 Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 3. Dimensions shown for reels up to and including 30-31 disc size reflect pressed frames. All others are rollformed channel frames. 4. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models: Net (lbs.)/kg Ship (lbs.)/kg Electric 40/18.1 40/18.1 Hydraulic 20/9.1 20/9.1 Air 20/9.1 20/9.1 5. When ordering power rewind models, prefix model number with: A = Air Rewind EP = Electric Rewind (1/2 hp) HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and 18" air hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 6. Finish: refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2 † Some applications require a clutch/reduction unit.

F F CRANK POWER 32 33 813 838 41.5 42.5 1054 1080 23.5 24.5 597 622 32 33 813 838 25.5 26.5 648 673 32 33 813 838 29.25 30.25 743 768

B

G

H

X

Y

21.5 546 23.5 597 27.88 708 27.88 708 29.88 759 29.88 759 33.62 854

12.12 308 12.12 308 15.5 394 15.5 394 15.5 394 15.5 394 17.75 451

17.5 445 27 686 9 229 17.5 445 11 279 17.5 445 15 381

16.75 425 16.75 425 21.75 552 21.75 552 21.75 552 21.75 552 27.75 705

E

C 10.5 267

G H

X

Y D

A F

Power Rewind Shown

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

27 msk@petropump.ru


S E R I E S

MANUAL OR POWER REWIND REELS To handle single 1-1/2" or 2" I.D. hose.

• Heavy-duty reel designed for longer lengths and larger diameters of hose through 2" I.D. • Choose gear-driven crank rewind or chain and sprocket drive powered by an electric, hydraulic or compressed air motor. • Crank rewind reels supplied with a pinion brake, power rewind reels with a comet brake. • Standard inlet 90° ball bearing swivel joint 2" female NPT threads. • Standard outlet flanged riser 2" female NPT threads • Standard inlet, outlet riser and hub assembly are steel. Optional bronze or aluminum swivel joint and stainless steel hub assembly and riser, are available. • Rollers may be purchased as accessory items. • Pressures to 600 psi (41 bar). • Temperatures from -60° F to +175° F (-51° C to +79° C). • Consult factory for other pressures & temps.

Shown with Optional Auxilary Rewind

For: • Bulk Transfer • Chemical Transfer • General Dispensing • Suction/Discharge (consult factory)

• Fueling Applications Refer to: Aviation Catalog H-0418-AVIA Petroleum Catalog H-0417-FD

For use on reels with 39" diameter or larger discs and/or when increased torque and slower rewind speeds are required. Factory-installed when specified or available as an accessory item.

Chain Clutch-Reduction Units

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

28 www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

msk@petropump.ru


S E R I E S

Parts Drawing – ISO 35 Model Number

For Power Rewind See Note 4

Hose Capacity of Reel feet m. I.D. (in) I.D. (mm) O.D. (in) O.D. (mm)

8234-26-27 8238-26-27 8246-26-27 8226-33-34 8234-33-34 8238-39-40

1-1/2" 38 2-1/16" 52 80 24 100 30 145 44 85 26 150 46 340 104

Approx. Weight Crank Rewind 3 lb. kg. 2" 51 2-9/16" 65 60 18 75 23 100 30 60 18 115 35 225 69

Reel Dimensions*** inches mm.

NET

SHIP

A

B

D

E

120 54 145 66 196 89 80 36 133 60 218 99

170 77 195 88 245 112 150 68 230 105 420 191

26.25 667 30.25 768 38.25 972 17.75 451 26.25 667 30.25 768

20 508 24 610 32 813 11.5 292 20 508 24 610

27 686 27 686 27 686 31.5 800 31.5 800 40 1016

25.75 654 25.75 654 25.75 654 31.75 806 31.75 806 39 991

F F CRANK POWER 33.75 34.75 857 883 37.75 38.75 959 984 45.75 46.75 1162 1188 25.25 26.25 641 667 33.75 34.75 857 883 37.75 38.75 959 984

G

H

X

Y

26.62 676 26.62 676 26.62 676 33.38 848 33.38 848 39.88 1013

13.75 349 13.75 349 13.75 349 17.75 445 17.75 445 20.38 518

18.75 476 22.75 578 30.75 781 10.25 260 18.75 476 22.75 578

23.25 591 23.25 591 23.25 591 27.75 705 27.75 705 37 940

Notes: 1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 3. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models: Net (lbs.)/kg Ship (lbs.)/kg Electric 40/18.1 40/18.1 Hydraulic 20/9.1 20/9.1 Air 20/9.1 20/9.1 4. When ordering power rewind models, prefix model number with: A = Air Rewind EP = Electric Rewind (1/2 HP) HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and 18" air hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 5. Finish: refer to Page 4. 6. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2

E

B

C 15.5 393

G H

X A F

Y D

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

29 msk@petropump.ru


S E R I E S

MANUAL OR POWER REWIND REELS To handle 2" through 3" I.D. hose.

• Heavy-duty reel designed for longer lengths and larger diameters of hose through 3" I.D. • Choose gear-driven crank rewind or chain and sprocket drive powered by an electric, hydraulic or compressed air motor. • Crank rewind reels supplied with a pinion brake power rewind reels with a comet brake. • Standard inlet 90° ball bearing swivel joint 3" female NPT threads. • Standard outlet flanged riser 3" female NPT threads. • Standard, outlet riser and hub assembly are aluminum with ductile inlet. Optional bronze or aluminum swivel joint and stainless steel hub assembly and riser, are available. • Rollers may be purchased as accessory items. • Pressures to 300 psi (21 bar). • Temperatures from -20° F to +225° F (-29° C to +107° C). • Consult factory for other pressures & temps.

Shown with Optional Auxilary Rewind

For: • Suction/Discharge (consult factory)

• Fueling Applications Refer to: Aviation Catalog H-0418-AVIA Petroleum Catalog H-0417-FD

• High Volume Application • Bulk Transfer • Chemical Transfer

For use on reels with 39" diameter or larger discs and/or when increased torque and slower rewind speeds are required. Factory-installed when specified or available as an accessory item.

Chain Clutch-Reduction Units

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

30 www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

msk@petropump.ru


S E R I E S

Parts Drawing – ISO 57 Model Number For Power Rewind See Note 4

Hose Capacity of Reel feet m. I.D. (in) I.D. (mm) O.D. (in) O.D. (mm)

9332-33-34 9338-33-34 9346-33-34 9338-39-40 9334-45-46

2" 51 2-9/16" 65 70 21 100 30 140 43 185 56 200 61

2-1/2" 64 3-3/16" 81 30 9 45 14 60 18 90 27 130 40

Approx. Weight Crank Rewind 3 lb. kg. 3" 76 3-3/4" 95 25 8 35 11 50 15 80 24 115 35

Reel Dimensions** inches mm.

NET

SHIP

A

B

D

E

147 67 187 85 237 108 239 108 361 164

217 98 257 117 372 169 480 218 525 239

23.75 603 30.25 768 38.25 972 30.25 768 26.25 667

17.5 445 24 610 32 813 24 610 20 508

31.5 800 31.5 800 31.5 800 40 1016 46 1168

31.75 80 31.75 807 31.75 807 39 991 45 1143

Notes: 1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 3. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models: Net (lbs.)/kg Ship (lbs.)/kg Electric 40/18.1 40/18.1 Hydraulic 20/9.1 20/9.1 Air 20/9.1 20/9.1 4. When ordering power rewind models, prefix model number with: A = Air Rewind EP = Electric Rewind (1/2 HP) HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and 18" air hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 5. Finish: refer to Page 4. 6. Be sure to check dimensions and weights prior to ordering. NOTICE: A Flexible Connector must be used between the inlet pipe and the inlet swivel joint. *** x,y indicate mounting holes. See page 2

F F CRANK POWER 33.75 33.25 857 845 40.25 39.75 1022 1010 48.25 47.75 1226 1213 40.25 39.75 1022 1010 36.25 35.75 921 908

B

G

H

X

Y

33.88 861 33.88 861 33.88 861 40.38 1026 46.38 1178

18 457 18 457 18 457 20.88 530 23.88 607

16.25 413 22.75 578 30.75 781 22.75 578 18.75 476

27.75 705 27.75 705 27.75 705 37 940 43 1092

E

C 20 508

G H

Y D

X A F

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

31 msk@petropump.ru


M O D E L S

GH 1100 Configuration Shown

PORTABLE HOSE REELS ON WHEELS

GHAT 1200 Configuration Shown

To handle 3/8" through 1" I.D. hose.

• Continuous flow reels with swivel joint inlet, fluid hub, outlet riser. • Direct crank rewind and cam-lock brake. • One-piece foot, and removable steel handlebar. • Permanently attached crank. • GH Prefix to model # (e.g. GH1100, GHAT1200) includes garden hose thread on outlet, 5' lead-in hose, hose end clips. Model 1100 – standard inlet 90° ball bearing swivel joint 1/2" female NPT threads. • Standard outlet is 1/2" female NPT threads. • Pressures to 3000 psi (207 bar). • Temperatures from +20° F to +400° F (-7° C to +204° C). • Comes with rubber tires. Model AT1200 –standard inlet 90° balance pressure swivel joint 1" female NPT threads. • Standard outlet is 1" female NPT threads. • Operates at pressures to 1000 psi (69 bar). • Temperatures from -40° F to +250° F (-40° C to +121° C). • Consult factory for other pressures & temps. • Comes with pneumatic tires. Model Number

Hose Capacity of Reel feet m. I.D. (in) 3/8" I.D. (mm) 10 O.D. (in) 3/4" O.D. (mm) 19 275 84 – –

1100 AT1200

1/2" 13 7/8" 22 175 53 350 107

For: • Grounds Maintenance • Restaurants/Hotels • Washdown Operations • Home Use Parts Drawing – 1100–ISO 48; AT1200-ISO 87

Approx. Weight lb. kg.

5/8" 3/4” 1” 16 19 25 1" 1-9/32” 1-9/16” 25 125 – – 38 – – 250 150 100 76 46 30

Reel Dimensions inches mm.

NET

SHIP

A

B

C

D

E

F

G

H

47 21 86 39

100* 46 147* 67

21.5 546 24.88 632

12 305 11.5 292

6 152 8 203

22 559 23 584

16.5 419 22.75 578

24.62 625 26.5 673

39 991 40 1016

13.81 351 17.25 438

Notes: 1. Specifications subject to change. 2. Finish: refer to Page 4. 3. Be sure to check dimensions and weights prior to ordering. * Dimensional weight applies when shipped as a parcel package (via FedEx or UPS Ground). Some assembly required.

B

E

C

G

H

A

D F

GH 1100 Shown

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

32 www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

msk@petropump.ru


M O D E L S

PORTABLE STORAGE REELS ON WHEELS

ATC1250 Standard Configuration Shown

For storage of hose, cable, rope or wire. • Direct crank rewind. • One-piece foot, and removable steel handlebar. • Supplied with a cam-lock drag brake. C1150 – with rubber tires. • A 1-1/8" x 2-3/8" (28 mm x 60 mm) opening in the drum to initiate winding. ATC1250 – with pneumatic tires. • A larger version of the C1150 with a 4-1/2" x 9" (114 mm x 229 mm) drum opening.

For: • Industrial Maintenance • Construction • Agriculture • Grounds Maintenance

C1150 Standard Configuration Shown

Optional Folding Handle for Compact Storage

Parts Drawing – C1150-ISO 48; ATC1250-ISO 87 Model Number

Cable Capacity of Reel feet m.

O.D. (in) O.D. (mm) C1150 ATC1250

Gauge/Number of Conductors 16/3 14/3 12/3 .390 .530 .600 10 14 15 1100 500 400 335 152 122 1800 950 750 549 290 229

Approx. Weight lb. kg. 10/3 .690 18 300 91 550 168

Reel Dimensions inches mm.

NET

SHIP

A

B

C

D

E

F

G

H

44 20 84 38

100* 46 147* 67

21.5 546 24.88 32

12 305 11.5 292

6 152 8 203

22 559 23 584

16.5 419 22.75 578

24.25 616 26.5 673

39 991 40 1016

13.81 351 17.25 438

Notes: 1. Specifications subject to change. 2. When ordering specify model number, O.D., length and weight of cable, hose, etc. 3. Finish: refer to Page 4. 4. Be sure to check dimensions and weights prior to ordering. * Dimensional weight applies when shipped as a parcel package (via FedEx or UPS Ground). Some assembly required.

E

B

G C

H

A

D F

ATC 1250 Shown

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

33 msk@petropump.ru


S E R I E S

MANUAL OR POWER REWIND STORAGE REELS To handle single 1/4" through 1" O.D.

• Reels are designed for storage of long lengths of hose, cable, rope, wire or other materials. • A 1-1/8" x 2-3/8" (28 mm x 60 mm) opening in the drum to initiate winding. • Direct crank rewind, permanently attached. Removable crank option is available. Also available chain and sprocket rewind powered by electric, compressed air, or hydraulic motor. • Supplied with cam lock brake on manual rewind models only. • Optional divider discs can be placed at almost any point. Be sure to specify spacing of discs on your order. • Rollers may be purchased as accessory items.

For Storage Of: • Hose • Cable

Standard Configuration Shown

• Rope • Wire

Parts Drawing – ISO 218 Model Number

Hose Capacity of Reel feet m.

For Power Rewind See Note 5 C1514-17-18 C1520-17-18 C1526-17-18 C1530-17-18

O.D. (in) O.D. (mm)

1/4" 6 1300 396 – – – – – –

1/2" 13 325 99 650 198 900 274 1000 305

3/4" 19 150 46 300 91 450 137 550 168

Approx. Weight Crank Rewind 4 lb. kg.

1" 25 75 23 150 46 225 69 275 84

NET 23 10 25 11 27 12 29 13

UPS/ FedEx Freight SHIP SHIP Wt. Wt. 65* 58 30 26 80* 60 36 27 98* 62 45 28 110* 64 50 29

Notes:

Reel Dimensions*** inches mm.

A

B

11 279 17 432 23 584 27 686

6 152 12 305 18 457 22 559

E CRANK 16.5 419 16.5 419 16.5 419 16.5 419

E POWER 19 483 19 483 19 483 19 483

F CRANK 17.5 445 23.5 597 29.5 749 33.5 851

X 9.5 241 15.5 394 21.5 546 25.5 648

E

B

1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other dimensions. 3. Dimensions reflect pressed frames. 4. Weights shown in chart are for crank rewind models. ADD these amounts for power rewind models, does not apply to FedEx or UPS. Net (lbs.)/kg Ship (lbs.)/kg Electric 18/8.2 18/8.2 Hydraulic 15/6.8 15/6.8 Air 15/6.8 15/6.8 * Dimensional weight applies when shipped as a parcel package (via FedEx or UPS Ground). 5. When ordering power rewind models Prefix model number with: A = Air Rewind E = Electric Rewind HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and 18" air hose; 12v and 24v DC rewind reels are supplied with switch and solenoid; 115v AC rewind reels are not supplied with switch but can be ordered separately; hydraulic rewind reels are not supplied with control valve.) 6. Finish: refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering. *** x,y indicate mounting holes. See page 2

F POWER 16.5 491 22.5 572 28.5 724 32.5 826

C 6 153

G 18.12 460 H 9.88 251

Y 10 254 D 14.5 368

X A F

Crank Rewind Shown

Optional External Mounting Brackets part no. 9906.0027. Add 2-1/2" to the X dimensions shown in the chart.

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

34 www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

msk@petropump.ru


S E R I E S

MANUAL REWIND STORAGE REELS

To handle single 1/2" through 1-1/2" O.D.

Standard Configuration Shown

For Storage Of: • Hose • Cable

Standard with Crank Handle

• Rope • Wire

Optional Aluminum Hand Cart 4300-AL Mounting Available, see page 2

Parts Drawing – ISO 117 Model Number

Hose Capacity of Reel feet m.

O.D. (in) O.D. (mm) C3218-25-26 C3228-25-26 C3234-25-26

1/2" 13 1000 305 – – – –

3/4" 19 450 137 1000 305 1300 396

• A 4–1/2" x 9" (114mm x 229mm) opening in the drum to initiate winding. • Designed for storage of long lengths of hose, cable, rope, wire or other materials. • Choose disc rewind or removable direct crank rewind. • Supplied with spring actuated pin lock. • Optional divider discs can be placed at almost any point. Be sure to specify spacing of discs on your order. • Rollers may be purchased as accessory items.

1" 25 225 69 500 152 650 198

Approx. Weight Crank Rewind lb. kg. 1-1/4" 32 125 38 325 99 400 122

1-1/2" 38 90 27 200 61 275 84

Reel Dimensions*** inches mm.

NET

SHIP

A

B

85 39 109 49 122 55

127 58 151 68 164 74

15 381 25.5 648 31.5 800

9.5 241 20 508 26 660

Notes:

E CRANK 24.75 629 24.75 629 24.75 629

F CRANK 22 559 32.5 826 38.5 978

C 10.5 267

H

X

27.88 708 27.88 708 27.88 708

15.5 394 15.5 394 15.5 394

7 178 17.5 445 23.5 597

E

B

1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other dimensions. 3. Dimensions reflect pressed frames. 4. Series C3200 requires 3-1/2" clearance to remove crank handle. 5. Subtract 5" from ‘F’ dimension for disc rewind on C3200 Series. 6. Finish: refer to Page 4. 7. Be sure to check dimensions and weights prior to ordering. *** x,y indicate mounting holes. See page 2

G

G H

X A F

Y 21.75 552 D 25.5 648

Hannay Reels, Inc. Phone 518-797-3791 Toll Free 1-877-GO REELS (467-3357) FAX 1-800-REELING (733-5464) USA or FAX 518-797-3259 (International) www.hannay.com reels@hannay.com

www.petropump.ru

Официальный дистрибьютор продукции Hannay в России - ООО "Петропамп"

35 msk@petropump.ru


Stainless Steel Reels

Pumper/Cleaner Reels

Cable Reels

Reference Guide

Firefighting Reels

Pressure Wash and Spray Reels

Audio/Video Reels

Welding Reels

Ordering & Accessory Guide

Family owned and operated since 1933, Hannay Reels is the world leader in both OEM and aftermarket applications. Hannay offers thousands of standard hose reel and cable reel models, as well as unmatched custom capabilities. We can easily and affordably customize a reel to meet your exact specifications – built to last, delivered fast. Additional catalogs are available through your local Hannay Reels dealer or online at www.hannay.com.

553 State Route 143 • Westerlo, New York 12193 Toll Free Phone: 1-877-GO-REELS • Toll Free Fax: 1-800-REELING E-mail: reels@hannay.com Intl. Phone: 1-518-797-3791 • Intl. Fax: 1-518-797-3259

107078, Russia, Moscow, Novaya Basmannaya, 23, str. 1A Tel.: +7(499) 277-15-16 +7(495) 661-94-24 E-mail: msk@petropump.ru Web: www.petropump.ru

www.hannay.com BMP 10M 01-11 Rev 4

Катушки для рукавов  

Общий каталог катушек для РВД