TECHNICAL DATA FRONT VIEW
SIDE VIEW PRODUCTION - More than 20 bags/minute
Air pressure Air consumption Absorbed power
6 BAR 40nl/cycle 13 Kw
BAGS SPECIFICATIONS type
AVAILABLE CONFIGURATIONS Width Lenght Gusseted
Premade open mouth Bags format managed: - Flat bags, with and without hand holder, pillow type, with sewn bottom, sealed or glued (pinch bottom) - Flat bags, with and without hand holder, square bottom - Gusseted bags, with and without hand holder, sewn bottom, square, sealed or glued (pich bottom) - Pinch top Paper Coated paper Paper with pe liner Paper with aluminium liner Poliethylene PE Raﬁa with polypropylene Coating raﬁa Raﬁa with PE liner 260-580 mm; 10,24-22,83 inches (ﬂat bags) 340-580 mm: 13,39-22,83 inches (gusseted bags)
550-1050 mm; 21,65-41,34 inches 80 - 160 mm; 3,15-6,30 inches Technical features of the equipment can be modiﬁed without any obligation of notice.
EFFEGIELLE S.R.L. IMECO AUTOMAZIONI VIA AMEDEO TONANI, 4/B 26030 MALAGNINO (CR) ITALY TEL. (+39) 0372/496826 - FAX (+39) 0372/496847 www.imeco.org - firstname.lastname@example.org
YOUR WEIGHING AND BAGGING SPECIALIST
CHARACTERISTICS AND ADVANTAGES
For products with ﬁne granulometry it is available a dinamic placing system to compact in the best way the product into the bags.
Fully automatic bag size change over procedure without spout replacing mouth Wide working range from 5 to 50 kg
Dearation system product by means of a porous dipping probe.
High working endurance (range) thanks to the automatic high speed magazine of the empty bags
Secondary dearation system by means of a press device able to allow the oulet ( output) of the exceeding air.
High sanitation degree thanks to the new designed elliptical stainless steel bag spouth High working reliability thanks to the bag placing robot
Closing systems : seal, simple sewing, seal and simple sewing, folding and sewing, single folding and glueing, double folding and hot melt glueing, sewing with over tape application, seal and sewing with over tape application, sewing with heat sealed over tape
High working ﬂexibility thanks to the new designed bags ﬂake off system able to handle every kind of materials Full bag control from its placing up to the mouth sealing, eliminating the possible product contamination Motorized high adjustment of bag take away conveyor Control system by means of plc complete with graphic interface operator for an easy use of the machine
Bags mark systems. Check weigher with automatic expeller. Metal detector.
MOTORIZED BAGS MAGAZINE
BAGS PICK UP AND TRANSFER
PLACING ON SWIVEL BAG SPOUT
TELESCOPIC BAG SPOUT
BAGS HOLDER CLAMPS
BAG MOUTH STRETCHER
VIBRATION SYSTEM FOR PRODUCT SETTLING
BAG MOUTH STRETCHER FILLED BAGS TRANSPORTER
CONVEYOR AND BAG FOLDING