Page 1

Diagnose P0330 OBD-II Trouble Code issue with Knock Sensor 2 Circuit Malfunction of my car?

What the P0330 code means P0330 is a DTC that is set when a malfunction is detected in the knock sensor 2 circuit that causes it to not operate properly. Once the ECU detects the malfunction a Check Engine Light will be displayed on the dashboard. The Check Engine Light will remain until the code is cleared or the vehicle is repaired. What causes the P0330 code? Defective Knock Sensor Defective Knock Sensor Circuit or connections Defective EGR System Malfunctioning Cooling System Lean air/fuel ratio What are the symptoms of the P0330 code? These could include a lack of power and possibly some degree of hesitation upon acceleration, accompanied by a spark knock, and an illuminated service engine soon lamp. The service engine soon lamp may remain on constantly, illuminate and turn off intermittently, or come on for extended periods of time and then turn off for short or long periods of time. Common mistakes when diagnosing the P0330 code


Common causes of misdiagnosis include replacement of the knock sensor when another more serious engine malfunction is to be blamed. Make sure that the knock sensor is not simply “doing its job� before condemning it to the scrap heap. What repairs can fix the P0330 code?

1. Knock sensor replacement 2. Faulty ECU replacement 3. Open or short in wiring harness repaired or replaced 4. Fixing connection issues 5. Resolving engine coolant system faults 6. Lean condition repair However, if you are facing issue and not able to diagnose it then you can visit us at PartsAvatar Car Parts, Toronto, our certified engineers will diagnose and fix the issue

Partsavatar Car Parts, Toronto - Diagnose P0330 OBD II trouble code  

P0330 is a DTC that is set when a malfunction is detected in the knock sensor 2 circuit that causes it to not operate properly Once the ECU...

Partsavatar Car Parts, Toronto - Diagnose P0330 OBD II trouble code  

P0330 is a DTC that is set when a malfunction is detected in the knock sensor 2 circuit that causes it to not operate properly Once the ECU...

Advertisement