__MAIN_TEXT__

Page 1

Uniclass

EPIC

L3811:P43 C421:X421 CI/SfB

(21路4) Xh4

comar5P.i Window Cladding Interfaces Aluminium window interfaces that allow a Comar window to be installed as a cladding panel.

The Parkside Group Ltd Unit 5, The Willow Centre 17 Willow Lane, Mitcham Surrey CR4 4NX Tel: +44(0) 20 8685 9685 Fax: +44(0) 20 8646 5096 Email: sales@parksidegrp.co.uk Web: www.comar-alu.co.uk

complementing architecture


2

design Comar 5P.i Cladding Interfaces Cladding the building envelope can provide a striking solution to a

cladding interface, which mimics the edge profile of the cladding

design brief. However installing opening vents into claddings can

system. This allows the window to be installed in exactly the same

create issues with joint integrity. Traditionally, opening vents were

way as the panels.

installed with flashings and joint integrity relied on site applied

Comar 5P.i Cladding Interfaces provide cost effectiveness: site labour

sealant. The main disadvantage of this is long-term sealant

is reduced, due to the seamless integration of the window system into

degradation and lack of weather tightness of the façade.

the cladding.

Longevity of solution are the key words for Comar 5P.i Cladding

As the adaptor utilises Comar P.i technology, low U-values and dual

Interfaces. The adaptor allows the specifier the design opportunity to

colour options are available. The adaptor fits all window

incorporate windows into a façade without the need for additional

combinations, so a variety of tilt and turn, horizontal and vertical pivot,

flashings. The external frame of the windows incorporates the

top-swing, casement windows can be specified.

Integration Kingspan

Europanel

Kingspan’s 70mm and 80mm Optimo cladding has slim sight lines

Europanel wall cladding is a flat composite wall panel specially

which create a visually striking appearance. Available in cover widths

designed for panel integrity, joint performance and ease of

of 900 or 1000mm, the system has a hidden joint detail which conceals

construction with the widest range of modules available. Europanel

fasteners from view.

Premier system is a higher specification truly flat panel with a suite of

Comar’s Kingspan Panel Interfaces, allow window units to be prefabricated and “dropped” into the panel system facilitating the

integrated aluminum extruded trims and accessories including window integration, snap-on details, gasket joints and integrated louvres.

simple and quick construction that has become the standard with

Other Options

Kingspans systems. The advanced Optimo system also includes a

Comar’s Technical Department can produce profiles for other types of

broad range of project specific accessories for designers with simple

panels upon request. Please contact Comar’s Marketing Department

integration for doors and windows.

for further details.


Comar 5P.i Window System

Window Configurations

The Comar 5P.i is a 60mm polyamide system that provides exceptional

horizontal and vertical pivot, tilt and turn, top-swing reversible and

thermal efficiency for applications where accurate U-value trade-offs

sliding windows. Comar 5P.i integrates with all Comar systems to

are required. Comar 5P.i answers the demands of the latest building

provide opening vents to window walling, curtain walling and ground

regulations by providing enhanced thermal performance, reducing

floor treatment, as well as the ability to be coupled together to form

heat loss and maintaining internal temperatures for longer. This

ribbon windows.

Comar 5P.i range includes window configurations, such as: casement,

directly impacts on the clients long term use of the building, reducing energy bills.

Installation

Comar 5P.i also provides a wealth of design possibilities with its dual

These adaptor profiles have been designed to match the top and

colour option: the internal face and external faces of the profiles can

bottom of ‘Kingspan’ and ‘Europanel’ interlocking panel joints,

be polyester powder coated or anodised in a multitude of colours and

enabling a window when fitted with these profiles, to be ‘dropped’

finishes. Comar 5P.i can incorporate through-frame or glazed-in

into the cladding system in the same way as a panel, eliminating the

ventilators from the Comar-Duco range. Comar 5P.i offers outstanding

need for any separate parts or flashings, thus maintaining the

weather performance, exceeding the requirements of the very latest

continuity of cladding construction. Comar 5P.i Cladding Interfaces

weather tightness tests: BS EN’s 1026, 1027 & 12211.

maintain the flush external appearance of the cladding.

Available Profiles Europanel

Kingspan Optimo

Profile

5mm Panel Joints

12mm Panel Joints

70mm

80mm

85mm

126mm

85mm

126mm

Sill

Jamb

Head


4

Europanel Cladding Interfaces 126mm and 85mm Panels Typical Jamb Details

REAR AIR SEAL REAR AIR SEAL WINDOW FRAME INSERT

60

WINDOW INSERT WIDTH = ADAPTOR FRAME WIDTH-103mm

60

WINDOW FRAME INSERT

20

3MM THICK PRE-PUNCHED SPREADER WASHER BY OTHERS

51.5

EUROPANEL ADAPTOR FRAME WIDTH = EUROPANEL JOINT WIDTH - 31mm

‘OMEGA’ SECTION SUPPLIED AND FITTED BY OTHERS

15.5

WINDOW INSERT WIDTH = ADAPTOR FRAME WIDTH-103mm

54 51.5

EUROPANEL ADAPTOR FRAME WIDTH = EUROPANEL JOINT WIDTH - 31mm

15.5 CONTINUOUS 9X3mm BUTYL MASTIC BY OTHERS

CONTINUOUS 9X3mm BUTYL MASTIC BY OTHERS

126mm thick Europanel jamb detail using Omega sections EPH-02A, 2B and 2C

SASH SIZE = ADAPTOR FRAME WIDTH+63mm

126mm thick Europanel jamb detail using Omega sections PSH-02A and PSH-02B

REAR AIR SEAL

REAR AIR SEAL

EUROPANEL ADAPTOR FRAME WIDTH = EUROPANEL JOINT C WIDTH - 51mm

‘OMEGA’ SECTION SUPPLIED AND FITTED BY OTHERS

42.6

SASH SIZE = ADAPTOR FRAME WIDTH+63mm

31.5 25.5

‘OMEGA’ SECTION SUPPLIED AND FITTED BY OTHERS CONTINUOUS 9X3mm BUTYL MASTIC BY OTHERS

85mm thick Europanel jamb detail using Omega sections EPH-02A, 2B and 2C

EUROPANEL ADAPTOR FRAME WIDTH = EUROPANEL JOINT C WIDTH - 31mm

31.5 15.5

‘OMEGA’ SECTION SUPPLIED AND FITTED BY OTHERS CONTINUOUS 9X3mm BUTYL MASTIC

85mm thick Europanel jamb detail using Omega sections EPH-02A, 2B and 2C


Europanel Cladding Interfaces 126mm and 85mm Panels Typical Head Details

SECONDARY STEELWORK BY OTHERS

SECONDARY STEELWORK BY OTHERS

EUROPANEL ‘PREMIER’ PANEL 126mm WIDE

EUROPANEL ‘PREMIER’ PANEL 126mm WIDE

3.5

5mm JOINT

ADDITIONAL PROFILES AT HEAD ONLY

126mm Europanel head detail for 12mm jointing system

51.84 WINDOW INSERT HEIGHT = ADAPTOR FRAME HEIGHT-103

HEIGHT OF EUROPANEL MODULE

ADAPTOR FRAME HEIGHT - MODULE HEIGHT-13mm

51.5 WINDOW INSERT HEIGHT = ADAPTOR FRAME HEIGHT-103

CENTRES OF EUROPANEL MODULE

OVERALL EUROPANEL ADAPTOR FRAME HEIGHT PANEL MODULE CENTRES-13mm 7.5

12mm JOINT

ADDITIONAL PROFILES AT HEAD ONLY

126mm Europanel head detail for 5mm jointing system

EUROPANEL ‘PREMIER’ PANEL 85mm WIDE

ADDITIONAL PROFILE AT HEAD ONLY

85mm Europanel head detail for 12mm jointing system

HEIGHT OF PANEL MODULE

FIXING ANGLE BACK TO SECONDARY STEEL DEPENDANT ON SITE CONDITIONS

2

SECONDARY STEELWORK BY OTHERS

4

2

5mm JOINT

SECONDARY STEELWORK BY OTHERS

ADAPTOR FRAME HEIGHT = MODULE HEIGHT-13.5mm

HEIGHT OF PANEL MODULE

ADAPTOR FRAME HEIGHT = MODULE HEIGHT-13.5mm 7.5

12mm JOINT

EUROPANEL ‘PREMIER’ PANEL 85mm WIDE

85mm Europanel head detail for 5mm jointing system

FIXING ANGLE BACK TO SECONDARY STEEL DEPENDANT ON SITE CONDITIONS ADDITIONAL PROFILE AT HEAD ONLY


Europanel Cladding Interfaces 126mm and 85mm Panels Typical Sill Details

85mm Europanel sill detail for 5mm jointing system

SECONDARY STEELWORK BY OTHERS

126mm Europanel sill detail for 12mm jointing system

6

9.5 7

5mm JOINT

126mm Europanel sill detail for 5mm jointing system

PRESSED ALUM’ ANGLE BY WINDOW FABRICATOR

12mm JOINT

SECONDARY STEELWORK BY OTHERS

SECONDARY STEELWORK BY OTHERS

12mm JOINT

5mm JOINT 2.5

6

9.5

PRESSED ALUM’ ANGLE BY WINDOW FABRICATOR

85mm Europanel sill detail for 12mm jointing system

SECONDARY STEELWORK BY OTHERS


kingspan Kingspan Interfaces 80mm Panels Typical Details

ADAPTOR FRAME SQUARE CUT AT HEAD

WINDOW INSERT MITRED CUT

KINGSPAN PANEL MODULE CENTRE LINE

ADAPTOR FRAME MITRED CUT AT SILL

CS489

SEE GLAZING OPTIONS

CS123

CLEAT REF WS416XSLF CHEVRON REF WS515XSLF

KINGSPAN PANEL MODULE CENTRE LINE

Jamb detail of window abutting ‘cut end’ of ‘Kingspan’ panel

2mm TOLERANCE ALLOWED FOR WINDOW FITTING TO ADAPTOR FRAME IN HEIGHT AND WIDTH

COVER SECTIONS EXTERNALLY AND INTERNALLY

ASSUMED STRUCTURAL STEEL WORK

CHEVRON REF WS515XSLF

CENTRE LINE OF VERTICAL JOINT IN PANELS

CLEAT REF WS416XSLF

‘KINGSPAN’ RECEIVER FLASHING CLEAT REF WS416XSLF

Jamb detail of window at vertical joint with ‘Kingspan’ panel

EXTERNAL SEALING OF WINDOW AT VERTICAL JOINTS WITH ‘KINGSPAN’ RECEIVER SECTION IS TO BE BY PANEL FITTERS


Kingspan Cladding Interfaces 70mm Panels Typical Details

70

CS489

5.5

14

1

13.5

KINGSPAN PANEL MODULE CENTRE LINE

WINDOW WIDTH DIMENSION

WINDOW HEIGHT = ADAPTOR JAMB HEIGHT DIMENSION - 66mm

DIMENSION OF CUT PANEL LENGTH

CS488 COVER SECTIONS EXTERNALLY AND INTERNALLY

PANEL CENTRE MODULE - 44mm

Jamb detail of window at vertical joint with ‘Kingspan’ panel

ASSUMED STRUCTURAL STEEL WORK

2mm TOLERANCE ALLOWED FOR WINDOW FITTING TO ADAPTOR FRAME IN HEIGHT AND WIDTH

CHEVRON REF WS515XSLF

CENTRE LINE OF VERTICAL JOINT IN PANELS

CLEAT REF WS416XSLF

CLEAT REF WS416XSLF

70

1

HEIGHT OF ADAPTOR JAMB PROFILES = MODULE HEIGHT - 17mm

KINGSPAN PANEL JOINT CENTRE DIMENSIONS (E.G. 600-900-1000)

WINDOW SUPPORT RAIL BY OTHERS

6

WINDOW WIDTH DIMENSION = ADAPTOR LENGTH - 130mm

3.5

KINGSPAN PANEL MODULE CENTRE LINE

30

63.95

CHEVRON REF WS515XSLF

CLEAT REF WS416XSLF

CLEAT REF WS416XSLF 64

CUT HEAD AND SILL ADAPTORS TO PANEL JOINT CENTRES - 42mm DIMENSION TO VERTICAL ‘KINGSPAN’ PANEL JOINT CENTRES

ADAPTOR FRAME SQUARE CUT AT HEAD

‘KINGSPAN’ RECEIVER FLASHING 21

EXTERNAL SEALING OF WINDOW AT VERTICAL JOINTS WITH ‘KINGSPAN’ RECEIVER SECTION IS TO BE BY PANEL FITTERS

Technical Back-Up An experienced Sales Team covers the UK while the Technical Department offers an unsurpassed design and installation advice service to designers, specifiers and fabricators; simply call: +44(0) 20 8685 9685

WINDOW INSERT MITRED CUT

For More Information ADAPTOR FRAME MITRED CUT AT SILL

To find out more about this or any other Comar Architectural Aluminium System, or to obtain your personal copies of the COMAR TECHNICAL MANUALS call: +44(0) 20 8685 9685 or fax on: +44(0) 20 8646 5096

Profile for Comar Architectural Aluminium Systems

Comar Cladding  

Comar 5P.i Window Cladding Interfaces Brochure

Comar Cladding  

Comar 5P.i Window Cladding Interfaces Brochure