Page 1

==== ==== Get more information on Sand Filters here: http://www.sandfiltering.com ==== ====

Sand filters are extremely useful to use because of the fact that they are used for water clarification. They are not a waste of an investment if you happen to have a swimming pool. Nearly all swimming pools have these sand filters, but it is all about getting the sand. Most people are often shocked at how important it is to fill these up with nicely made sand. Getting sand for sand filters is tough because most people just don't know where to look. This type of sand is very different and one that you need for your filters to work well. Where to get sand for sand filters? You can find this specific type of sand by getting in touch with your installation company who installed the swimming pool and your sand filter. They should know all about the process and give you the information you need. They can even provide it for you either for free or for a low price. It all depends on who you are working with exactly. How often should you change the sand? This is a very common question among pool owners because of their lack of knowledge on the subject. The recommended process would be exactly once every five years. Many people have filters that can go on longer and longer, but they can sometimes no be as efficient as useful. Tips for changing the sand in the filters The first part should consist of removing the old sand. Keep it clear and away from all of the old sand. This isn't that hard to do, but since everybody has different types of filters, the process can all be very different. So, follow the instructions given to you in the filter. Once it is opened, dig out the sand using a shovel of some kind. Rinse it out completely to have it squeaky clean. The next step should be to remove the under-drain, and then add water until it is half full. Place the sand inside and level everything out. This shouldn't be too hard as long as there are many of you guys doing the work. After putting in all of the sand needed, then you shouldn't have any more problems. You just have to reassemble the filter afterwards to complete the process. Getting a professional to do it Even if you want to do this on your own, you will find that hiring your professional installation service is a great idea. It can save you from tons of hard work later on to do it on your own. Sand filters are very complex types of items that can be very hard to use. However, you will find that it isn't all that difficult to do this as long as you know what to do. If you really want to get your


entire filter changed, consider the tips above. They can be extremely helpful for you in the long run. It does take to learn how this all works, but it can surely be a success in the long run.

Above ground sand filters have been found to be a very cost efficient and effective method to keep pool water free of dirt and bacteria.

Article Source: http://EzineArticles.com/?expert=James_S_Scheuerman

==== ==== Get more information on Sand Filters here: http://www.sandfiltering.com ==== ====

above ground sand filters  

Learn more about Sand Filters: http://www.sandfiltering.com

Advertisement