Issuu on Google+

Pan Gulf Products MODEL-K FIRE PUMP TEST METER - RATING 500 PSI (BUTT WELD, GROOVED ENDS & 300 # FLANGED)

- RATING 275 PSI (FOR 150 # FLANGED UNITS ONLY) A calibrated venturi and attached GPM meter installed on the discharge of a fire pump to accurately determine pump performance. 4-1/2" dial meter is shipped for mounting on venturi bracket. If meter is to be remote mounted, consult factory on special hose lengths. Dual LPM/GPM Scales Available.

MODEL-M FIRE PUMP TEST METER - RATING 175 PSI A calibrated venturi and attached GPM meter installed on the discharge of a fire pump to accurately determine pump performance. 6" dial meter is shipped for mounting on venturi bracket. If meter is to be remote mounted, consult factory on special hose lengths. Dual LPM/GPM Scales Available.

MODEL-M/MODEL-K FIRE PUMP TEST METER INSTALLATION INSTRUCTIONS

OPERATING INSTRUCTIONS FOR GERAND FIRE PUMP TEST METER


1. Close system OSY Valve "A". 2. Open By-Pass valve and "B" Butterfly Throttle Valve. 3. Purge meter located on venturi as follows:  

Open station shut-off valves (below meter) and vent valves (above meter). When a steady stream of water is passing through each plastic hose, meter is purged of air. Close vent valves after air purging.

4. Start fire pump and read meter in GPM. 5. Refer to pump GPM requirement and adjust Throttle Valve for this requirement. 6. After test, open OSY Valve "A" and close By-Pass and "B" Valves.

MOST COMMON MODEL-K FM APPROVED PUMP GPM 25 50 100 150 200 250 300 450 500 750 1000 1250 1500 2000 2500 3000 3500 4000 4500 5000

VENTURI SYSTEM MODEL NO. K-25-1-1/4(616) K-50-2(685) K-100-2-1/2(746) K-150-3(766) K-200-3(766) K-250-4(744) K-300-4(744) K-450-4(744) K-500-5(715) K-750-6(743) K-1000-6(743) K-1250-6(743) K-1500-8(750) K-2000-8(750) K-2500-8(750) K-3000-8(750) K-3500-10(755) K-4000-10(755) K-4500-10(755) K-2000-12(750)

PIPE SIZE 1-1/4" 2" 2-1/2" 3" 3" 4" 4" 4" 5" 6" 6" 6" 8" 8" 8" 8" 10" 10" 10" 12"

METER RANGE MIN. & MAX. GPM 12.5-50 25-100 50-200 75-300 100-400 125-500 150-600 225-900 250-1000 375-1500 500-2000 625-2500 750-3000 1000-4000 1250-5000 1500-6000 1750-7000 2000-8000 2250-9000 2500-9000

WELDED OR GROOVED VENTURI LENGTH Threaded only 3-3/4" Threaded only 4-1/4" 3"(WELD) 4" 3-1/2"(WELD) 4-3/8" 3-1/2"(WELD) 4-3/8" 3-1/2"(WELD) 3-3/4" 3-1/2"(WELD) 3-3/4" 3-1/2"(WELD) 3-3/4" 5" 6" 6" 6" 7" 7" 7" 7" 8" 8" 8" 12"

*FLANGED VENTURI LENGTH 150 # (RF) 300 # (RF) --------9-1/2" 10" 9" 10-1/4" 9" 10-1/4" 9-1/2" 10-3/4" 9-1/2" 10-3/4" 9-1/2" 10-3/4" 12" 13-1/4" 13" 14-1/4" 13" 14-1/4" 13" 14-1/4" 15" 16-1/4" 15" 16-1/4" 15" 16-1/4" 15" 16-1/4" 16" 17-3/4" 16" 17-3/4" 16" 17-3/4" 21" 22-3/4"

ADDITIONAL MODEL-K FM APPROVED PUMP GPM 200 250 450 500 750 1000 1250 1500 2000 2500 3000 3500 4000

VENTURI SYSTEM MODEL NO. K-200-4(744) K-250-5(715) K-450-5(715) K-500-6(743) K-750-5(715) K-1000-8(750) K-1250-8(750) K-1500-10(755) K-2000-10(755) K-2500-10(755) K-3000-10(755) K-3500-12(750) K-4000-12(750)

PIPE SIZE 4" 5" 5" 6" 5" 8" 8" 10" 10" 10" 10" 12" 12"

METER RANGE MIN. & MAX. GPM 100-400 125-500 225-900 250-1000 375-1500 500-2000 625-2500 750-3000 1000-4000 1250-5000 1500-6000 1750-7000 2000-8000

WELDED OR GROOVED VENTURI LENGTH 3-1/2"(WELD) 3-3/4" 5" 5' 6" 5" 7" 7" 8" 8" 8" 8" 12" 12"

*FLANGED VENTURI LENGTH 150 # (RF) 300 # (RF) 9-1/2" 10-3/4" 12" 13-1/4" 12" 13-1/4" 13" 14-1/4" 12" 13-1/4" 15" 16-1/4" 15" 16-1/4" 16" 17-3/4" 16" 17-3/4" 16" 17-3/4" 16" 17-3/4" 21" 22-3/4" 21" 22-3/4"


4500

K-4500-12(750)

12"

2250-9000

12"

For More Detail Please CONTACT US

Saudi Arabia Al Khobar Phone:

+966 (0)3 897 2919/20/27

Fax:

+966 (0)3 897 5654

E-mail:

sales@pangulfproducts.com

Website:

http://www.pangulfproducts.com

21"

22-3/4"


Flow Meters Grooved