EPOXY Mapei Planiseal VS • Compliant with ASTM F3010 •Can be installed directly over clean concrete without mechanical profiling •No moisture testing required use up to 100% RH and 25 LBs of MVER •Alkali-resistant, two-component, 100%-solids epoxy coating that effectively stops moisture-related problems over concrete with floor coverings •Expedites floor-covering installations by eliminating the traditional wait time required for new concrete slabs to reach moisture levels suitable for installations Mapei Planiseal VS Fast •Compliant with ASTM F3010 •Can be installed directly over clean concrete without mechanical profiling •Dries in about 4 to 6 hours after application •For use over concrete subfloors with up to 100% RH and pH up to 14 •Fast-Track, Alkali-Resistant, Epoxy Moisture-Reduction Barrier Mapei Planiprep ET •Low-odor and VOC-compliant for use in interior, occupied environments •Use with Planiprep SA to prepare contaminated concrete for floorcovering •Extended working time allows epoxy to penetrate deeply into the substrate •Provides subfloor moisture control up to 12 lbs. (5,44 kg) MVER and 92% RH pH up to 14 USG RH-100 •For use over concrete subfloors with up to 100% RH and pH up to 14 •Perm rating (ASTM E96): <.05 •Exceeds the performance requirements in ASTM F3010 •Low viscosity promotes superior penetration and adhesion •100% solids epoxy mitigation system with zero VOCs •Fast cure in as little as 4 hours, depending on conditions •Empty packaging can be recycled
ROLL ON Mapei Planiseal MSP •Colored red to help ensure proper coverage •Water-based formulation for ease of use, cleanup and storage •Moisture protection up to 15 lbs. (6,80 kg) MVER and 99% RH •Provides moisture control, adhesive encapsulation and a primer for selfleveling compounds in one product
Mapei Planiseal PMB •Single-component, with no mixing required •Moisture-curing, polyurethane compound designed to provide moisture vapor emission protection for wood and bamboo flooring on damp concrete substrates •Zero VOCs •Compatible with MAPEI urethane and hybrid-polymer-based adhesives •No moisture limits, and no moisture testing required
XL Driseal 95 •QUICK DRYING 4 HOURS/SAME DAY INSTALL •SINGLE COAT - ROLLER APPLIED •LOW ODOR •DriSeal 95 is an aqueous acrylic polymer that dries to a clear film that is alkali and water-resistant. It designed for use on interior porous concrete substrates as a penetrating and film-forming polymer to protect flooring installations against moisture readings up to 95% in-situ Relative Humidity (RH), moisture vapor emission rate up to 10 lbs., and pH of 11.0 •DriSeal 95 is CRI™ Green Label Plus approved, FloorScore® certified and contains MicroSept™ Antimicrobial System Protection for enhanced resistance to mold and mildew •DriSeal 95 is designed and warranted for use only in conjunction with flooring adhesives manufactured by XL Brands 2
ROLL ON XL HydraStix 99 •One component, 100% solids, non-flammable and low odor liquid •VOC content that meets federal, state, and local governmental indoor air quality regulation •FloorScore® Certified •Use on porous bare concrete substrates with up to 99% RH and pH of 8.0–12.0 with a Concrete Surface Profile (CSP) of 1-2, no mechanical preparation required
XL HydraStix 99 AcouStix •Designed for use in conjunction with all floating floor systems including solid and engineered wood, laminate, vinyl tile and plank for reducing sound transmission •Application can also level substrate unevenness and improve the thermal insulating properties of the flooring system. •AcouStix also controls substrate moisture emissions and can bridge cracks up to 1/8”. •The silane terminated polymer cures within 6 hours to form a tenacious elastic underlayment. •AcouStix is free of solvents, hazardous chemicals (per OSHA Regulation CFR 1910.1200), water and isocyanates. •This product is a one component, 100% solids, non-flammable and low odor liquid underlayment with negligible VOC content and is FloorScore® Certified 3
FLOOR PREP Mapei Planiprep® MRS
•Planiprep MRS is an advanced, hydraulic-cement-based skim coating
compound designed for use under moisture-controlling membranes and adhesive systems.
•Easy mixing and smooth application characteristics •Not affected by high moisture conditions
•Can be placed before HVAC systems or interior finishes are installed •High compression strength for use in heavy traffic conditions
•Ease of placement, with variable water ratios
•Mapecem Quickpatch can be applied from 1/16" to 1-1/2" (1,5 mm to
3,8 cm) neat and from 1-1/2" to 3" (3,8 to 7,5 cm) neat in areas no larger than 24 sq. ft. (2,23 m2)
•Mapecem Quickpatch can be primed and covered with a leveler, a cement-based overlay or a tile-setting mortar in as little as 90 minutes, depending on temperatures
•Moisture-controlling adhesives or moisture mitigation systems can be used over Mapecem Quickpatch in as little as 16 hours.
•Floor coverings can be installed in as little as 16 hours after application as long as the existing subfloor meets the requirements of the mortars or adhesives used for installation
FLOOR PREP Mapei Ultraplan Extreme 2 •Moisture- and freeze/thaw-resistant when cured •Can be placed before HVAC systems or interior finishes are installed •Not affected by exposure to intermittent rain exposure after 6 hours or to freezing temperatures after 3 days of curing •High compressive strength for extreme durability during construction •Reduces subfloor preparation time for floor-covering applications
Mapei Planiprep SA •Removes many common concrete contaminants – such as motor oils, post-abatement chemicals and adhesive removers – from the top surface •Can be used to neutralize high-pH concrete slabs with pH’s greater than 12
•Etches the surface of highly polished concrete and converts it from being nonporous to porous
XL North Porosity + •Prepares concrete substrates for new surface application •Removes bond breaking films including Cure and Seal •Opens up steel troweled finished concrete •Increases grinding production •Works on Efflorescence 5
ADHESIVES Mapei Eco 185 •Mid-range solids level for a more durable bond •Fast grab to hold carpet in place during installation •High moisture resistance – up to 8 lbs. (3,63 kg) MVER and/or 90% RH •Low odor formula for use in occupied buildings •CRI Green Label Plus certified •Approved for use with jute, polypropylene (ActionBac), latex-unitary, sponge-rubber, hot-melt (Unibond), needle-punched, woven, closed cellular urethane and Enhancer backings Mapei Eco 285 •Ultra high solids for rapid setting and drying times •Fast grab to hold stiff and rigid carpet in place during installation •High moisture resistance – up to 8 lbs. (3,63 kg) in MVER and/or 95% RH •Low-odor formula for use in occupied buildings •CRI Green Label Plus certified •Approved for use with hot-melt (Unibond), urethane unitary, needle punched, woven, closed-cellular urethane foam, Enhancer, jute, polypropylene (ActionBac), latex-unitary, latex-foam and sponge-rubber backings Mapei Ultrabond ECO 711 •Quick-drying for fast-track VCT installations •Superior tack and bond to minimize tile movement •Dries clear so that layout lines remain visible during installation •High moisture resistance – up to 8 lbs. (3,63 kg) in MVER and 95% RH •Low-odor formula for use in occupied buildings •CRI Green Label Plus certified 6
ADHESIVES Mapei Ultrabond Eco 983 •100%-solids, with no water or solvents added •Moisture control up to 15 lbs. (6,80 kg) MVER and 90% RH •Easy to clean up special trowel clips are provided to apply the adhesive in a monolithic layer for subfloor moisture control. Mapei Ultrabond Eco 985 Hybrid-Polymer-Based, Moisture-Control and Sound-Reducing WoodFlooring Adhesive Mapei Ultrabond Eco 995 Premium Moisture-Control, Sound-Reduction and Wood-Flooring Adhesive •Moisture barrier, sound reduction and bonding system in a single product •100%-solids formulation; moisture-cured and with no solvent added •Durable bond strength for exotic and domestic wood species •Lifetime bond performance warranty •Low-odor formula with negligible volatile organic compound (VOC) content •Easy to trowel with excellent trowel-ridge holdout for proper adhesive bonding Mapei Ultrabond G15 •Fast-setting, two-part reactive epoxy adhesive with low volatile organic compounds (VOCs), designed for the installation of rubber and vinyl flooring in high-moisture conditions. •Provides the ultimate in bond and shear strength, can be used on concrete slabs with high moisture vapor emission rates, and is recommended for high-traffic installations where superior indentation resistance and performance are required. •Low perm rating •Fast-setting and easy to apply •Unaffected by moisture
ADHESIVES HydraStix 95 Resilient •Installations on or above grade over bare concrete substrates with up to 95% in-situ RH (per ASTM F2170), and a pH of 11.0 •High-strength, high-tack adhesive for installing multiple types of dimensionally stable floor coverings such as vinyl tiles & plank, vinyl composition tiles (VCT), solid vinyl tile, cork, rubber tile and sheet, non-pvc backed carpet tile, *rubber and vinyl stair treads and vinyl sheet flooring over porous and non-porous substrates •Offers extended open time, fast dry time and ease of application •This unique adhesive has outstanding water resistance and tenacious bond strength for demanding installations such as hospitals, schools, nursing homes, and hospitality •The low odor is ideal for occupied buildings. HydraStix 95 Broadloom •High solids adhesive developed with high bond strength to withstand demanding indoor applications •Solvent-free, low odor adhesive designed for the permanent installation of all breathable backed broadloom carpet •Recommended for indoor installations of most commercial carpets except for vinyl backed carpets •Made with MicroSept™ Advanced Antimicrobial System to protect the adhesive from bacterial and fungal growth •CRI™ Green Label Plus approved and FloorScore® Certified for indoor air quality •Installations on or above grade over bare concrete substrates with up to 95% in-situ RH (per ASTM F2170), and a pH of 11.0
ADHESIVES HydraStix 95 Aerosol •Solvent-free aerosol adhesive recommended for difficult installations of commercial vinyl flooring, VCT and rubber flooring where there is heavy traffic or rolling loads. •Demonstrates a very aggressive grab and exceptional shear bond strength over other aerosol adhesives and has tremendous moisture and plasticizer resistance •It can be used in occupied buildings and greatly reduces the handling and application requirements associated with conventional adhesives. •HydraStix 95 Aerosol is FloorScore® Certified by SCS Global Services for Indoor Air Quality and CRI™ GLP approved. •On or above grade bare concrete substrates with up to 95% in-situ RH (per ASTM F2170), and a pH of 8.0-11.0 when installing vinyl flooring, LVT, LVP and VCT •90% in-situ RH and 8.0-10.0 pH when installing rubber flooring •Sheet flooring seams may be heat welded immediately after installation •Normal traffic may be allowed as soon as the installation, finishing and clean-up are complete XL Stix 2230
•Extremely versatile Solvent-free adhesive with aggressive tack designed for the installation of vinyl-backed and non-vinyl backed modular carpet tile, luxury vinyl tile (LVT), vinyl plank and sheet flooring, VCT and fiberglass reinforced vinyl sheet
•Use on concrete substrates with up to 90% RH for flooring installed on or above grade (per current ASTM F2170), and pH of 8.0–10.0. USE WITH Vinyl-backed modular carpet tile Non-Vinyl-backed modular carpet tile
•When used with carpet tiles, this adhesive is formulated for releasing and
re-bonding while permanently retaining its tack allowing individual tiles to be lifted out easily and replaced without substantial loss of adhesive properties.
•When used with LVT, plank and vinyl sheet flooring, Stix 2230 provides a tenacious, permanent bond.
ADHESIVES XL Dyna-Stix VCT •Solvent-free adhesive that dries translucent. Tiles may be laid into the adhesive for an extended period of time after drying. Aggressive tack permits installers to work off tiles •This low-odor adhesive can be used in occupied environments such as hospitals, schools, nursing homes, hospitality and food preparation centers. •CRI™ Green Label Plus approved •Highly water resistant when dry •Contains MicroSept™Advanced Antimicrobial System to protect the adhesive from bacteria and fungal growth •Dyna-Stix VCT has an extended working time provided it remains free of dust and dirt •Use on concrete substrates on or above grade with up to 95% RH (per current ASTM F2170), and pH of 8.0–10.0 •Approved for use over ‘cutback” stains. Residue must be scraped clean until only a stain remains XL Stix Platinum •High-solids carpet adhesive designed for the permanent installation of all heavy-backed commercial carpets, such as barrier backed carpets, directly over approved substrates •Low odor •Requires minimal open time •Water-resistant when dry •Wet Set installation may be used on concrete substrates with in-situ Relative Humidity (RH) per ASTM F2170 up to 90% RH and with surface pH from 8–9 Stix Essential RES •Aerosol Flooring Adhesive is a solvent-free, non-flammable spray adhesive for installing most modular carpet tiles and resilient flooring, recommended for use with luxury vinyl tile and plank, sheet goods, vinyl composition tile (VCT) and modular carpet tiles in residential and commercial applications •Normal traffic and rolling loads may be allowed as soon as the installation, finishing and clean-up are complete •Modular carpet tiles over concrete substrates with up to 90% RH, and pH of 8.0–10.0 •Resilient flooring over concrete substrates with up to 93% RH, and pH of 8.0–11.0
MEMBRANES Traxx Shield 100 •Suppresses Water Vapor Emission from Concrete up to 100% RH, and suppresses pH of 14. •Stops alkalinity, emulsifying of adhesive, mold/mildew, and most flooring damage from moisture. •Peel-&-Stick Installation Method –Adheres to the concrete slab. –No curing time. No fumes. No dust. No VOCs. •Loose-Lay Installation Method –Perfect for planning future floor removal. –Easily installed over existing hard surface floor coverings. •Saves Money, Labor and Time –Finished floor coverings can be laid immediately afterTraxxShield100™ is installed. •Anti-Fracture Properties •Acoustical Properties •Greater acoustical values than any other rolled moisture barrier! The Uniform Building Code mandates 50/50 minimum forsound absorption, and TraxxShield100™ gives you 53 STC and 52 IIC. •Install with confidence under Carpet Tile, Broadloom, VCT, LVT, LVP, SVT, Static Dissipative Tile, Ceramic Tile, Laminates,and over Radiant Flooring Systems. •Mold & Fungus Resistance
Vapor Shield •Protects Against 100% RH and pH 12 •Mold & Fungus Resistant •Loose-Lay Installation •Approved for VCT, LVT, LVP, Carpet Tile and Ceramic Tile •No Down Time for Installation •Easy Install with No Mess •Low Cost Per Sq. Ft. •10-Year Limited Warranty •Roll Size: 5ft x 144ft, SQ. Ft.: 720 Sq. Ft.
Carpet Cushions & Supplies