System Stirrups for NEURO VARIO-SPRING REINFORCED
LIGHT
Lamination technique
REINFORCED
Rivet attachment technique long
NEURO CLASSIC
STANDARD
Vacuum thermoforming / Rivet attachment technique short
prepreg technique
LIGHT
General Measures for System Stirrups System width
Neck width Bore hole diameter
16mm
2.50
3.00
20mm 3.00
22.00
25.00
28.00
8.50
9.60
10.50
STANDARD
Thickness
14mm
Article number and measures for system width Fabrication technique
Unit
Rivet attachment technique short
16mm
20mm
FB4093-ST/3
FB4095-ST/4
Length from the middle of the bore hole [mm]
95
108
125
Weight [g]
50
80
Rivet attachment technique long
100
FB4082-ST/4
FB4093-ST/4
FB4095-ST/5
125
145
165
70
110
130
FB4182-ST/2
FB4193-ST/2
FB4195-ST/3
55
60
65
30
40
50
FB4282-ST/2
FB4293-ST/2
FB4295-ST/3
Length from the middle of the bore hole [mm]
62
68
74
Weight [g]
30
50
60
Piece
Article number
Piece
Length from the middle of the bore hole [mm] Weight [g] Lamination technique
Article number
Piece
Weight [g]
6°
REINFORCED
2° 4°
Piece
STANDARD
Vacuum thermoforming / prepreg technique Article number
NEURO SPRING
Length from the middle of the bore hole [mm]
LIGHT
14mm FB4082-ST/3
Article number
REINFORCED
System Stirrups for Different Fabrication Techniques
NEURO VARIO
Measure [mm]
8° 10° 20° 30° 40°
You will find appropriate system side bars and system anchors from catalogue page C10.1.
Range of motion in plantar flexion of 50°
REINFORCED
NEURO SWING
A43.2
NEURO VARIO-SPRING
The stirrup is marked with lines in the joint head area which serve as orientation for precisely filing the stirrup to the desired dorsal stop.
STANDARD
50°