Page 1

Modular PVC flooring

Urban

Tiles and planks to glue down


5607 12 BETON BOUCHARDE

5610 29 OAK ORGANIC


®

Urban

2012

Concrete and slate XXL

materials

WOODS

Classification EN 649

HK

Pu

Class 34 - 43

Easy maintenance

L

5

C E N Laboratory tested E

X

E

L

EN 649

5

US

G

A

IQ ED OMEST

RA NTI

7

E

ANS

Easy maintenance US

AG

E

UE

LIBERTY Urban LVT

UE

ANS

AG

Polyurethane PU treated

RA NTI

TI

Wear Layer 0.70 mm Decor film Calendared virgin PVC Calendared virgin PVC

DOMES Heavy Traffic Realistic looks RA NTI Indentation resistance A Indentation resistance

Calendared virgin PVC

Indentation resistance

Q

G

E

10

US

A

IQ ED OMEST

RA NTI E

G

AG

UE

ANS

A

RA NTI

5

E

A

E

G

T

B

A+

YEARS

G

E

W

B

ÉMISSIONS DANS L'AIR INTÉRIEUR A+ A B C Substances A+ principales : Émission totale : A+

UDIREV S'EN G

N È TE LA

X

ANS

E P OUR L A P

E

R RAN

Healthy environment

AG

T

A

Y

RZ

E N

Recyclable Virgin PVC

T

2004 EN 14041

C

• Bacteriostatic • Fungistatic


5607 12 BETON BOUCHARDE 91.44 cm x 91.44 cm

5606 01 WHITE 60 cm x 60 cm

5606 02 BLACK 60 cm x 60 cm

5610 29 OAK ORGANIC 15.24 cm x 91.44 cm

5609 15 LINEA GREY 18 cm x 120 cm


UDIREV S'EN

G AG

N È TE LA

5609 27 PINE LIGHT GREY 18 cm x 120 cm

5609 18 OAK SNOW 18 cm x 120 cm

5609 14 LINEA BEIGE 18 cm x 120 cm

5609 22 OAK STEEL 18 cm x 120 cm

5609 17 OAK SILVER 18 cm x 120 cm

E P OUR L A P

WOODS

5609 15 LINEA GREY 18 cm x 120 cm


5610 31 OAK OLD 15.24 cm x 91.44 cm

5609 21 OAK WHITE 18 cm x 120 cm

5609 20 OAK GREY 18 cm x 120 cm

5609 19 OAK LIMED 18 cm x 120 cm

5609 24 OAK BROWN 18 cm x 120 cm

5609 23 OAK GREY SILK 18 cm x 120 cm


UDIREV S'EN

G AG

N È TE LA

5609 16 WOOD STRIP 18 cm x 120 cm

5610 28 WALNUT 15.24 cm x 91.44 cm

5610 29 OAK ORGANIC 15.24 cm x 91.44 cm

5609 25 OAK RUST 18 cm x 120 cm

5609 26 OAK SAWN 18 cm x 120 cm

E P OUR L A P

WOODS

5610 30 OAK NATURE 15.24 cm x 91.44 cm


UDIREV S'EN

G AG

E P OUR L A P

N È TE LA

materials

5606 04 LEATHER DARK GREY 60 cm x 60 cm

5606 06 RUST OXYDE 60 cm x 60 cm

5606 01 WHITE

5606 03 LEATHER BROWN 60 cm x 60 cm

5606 05 TISSUE 60 cm x 60 cm

5606 02 BLACK

60 cm x 60 cm

5606 07 CARAMEL steamed 60 cm x 60 cm

60 cm x 60 cm


UDIREV S'EN

G AG

N È TE LA

5607 08 BETON PERLE 91.44 cm x 91.44 cm

5607 09 BETON OCHER 91.44 cm x 91.44 cm

91.44 cm x 91.44 cm

5607 12 BETON BOUCHARDE 91.44 cm x 91.44 cm

5607 10 BETON BEIGE 91.44 cm x 91.44 cm

E P OUR L A P

45 cm x 90 cm

5607 11 BETON CHOCOLATE

Concrete and slate XXL

5608 13 SLATE


LIBERTY URBAN LVT Fitting prescriptions

Technical features LIBERTY URBAN LVT Description

Floor: 100 % virgin PVC, heterogeneous planks (18 cm x 120 cm and 15.24 cm x 91.44 cm) and tiles (60 cm x 60 cm, 91.44 cm x 91.44 cm or 45 cm x 90 cm). PU treated for easy maintenance.

Recommended areas for use Total thickness Wear layer Abrasion class Surface treatment Resistance to bacteria

Offices and commercial areas

1 - Installation: The installation has to be done according to the prescriptions of the NF DTU 53.2 Standard. The floor must be flat, smooth, dry and sound. The product used for repair or renovation should have class P3 and the floor temperature ≥ 15°C.

2 - Storage of the tiles and planks:

Formaldehyde

2.5 mm 0.70 mm T Polyurethane PU Treated bacteriostatic and fungistatic Zero emission

Total weight Residual indentation Dimensional stability Slip resistance Electrostatic characteristics Light fastness Warranty

3.900 kg/m 2 0.02 mm < 0,50 % (EN 434 < 0,25%) R9 Antistatic >6 5 years, commercial use

Wear resistance EN 649

Class 34-43

* refer to the technical data from the supplier.

HK

A simple emulsion application is realised with:

Fire resistance on incombustible support

B fl -s1

Presentation

- P lanks 18 x 120 cm

carton of 15 planks = 3.24 m2

- P lanks 15.24 x 91.44 cm

carton of 24 planks = 3.34 m2

- Tiles 60 x 60 cm

carton of 12 tiles = 4.32 m2

- Tiles 91.44 x 91.44 cm

carton of 6 tiles = 5.01 m2

- Tiles 45 x 90 cm

carton of 10 tiles = 4.05 m2

Installation

Flat surface, dry, clean and sound. Grout class P3.

Maintenance

With a floor cloth and a neutral detergent. Maintain daily with broom or vacuum cleaner. No rubber caps or wheels.

LIBERTY URBAN must be stored 48 hours before installation: - in a closed room with normal relative humidity, - with at an ambient temperature of 15 °C, - on a flat surface.

3 - Adhesives* : MANUFACTURER BOSTIK MANG SADER UZIN MAPEI CEGECOL

ADHESIVE ADESITECH DALFIX SADER TAC U 1000 ULTRABOND ECOFIX CEGE 100 DPA

a fine-dented spatula 150 to 200 g/m2, type A4. Change the spatula as frequently as needed in accordance with this prescription. Application recommendations: - To follow scrupulously the prescriptions of the supplier. - Respect the gum/impregnation time depending on the temperature, humidity, the porosity and the consumption of glue. - Wait till the preparation product is translucent to fit the tiles and planks.

4 - Fitting the tiles: Attention! Check the products for visible defects prior the installation. Don’t install faulty planks or tiles. If any differences in aspect occur, contact your supplier before starting or continuing the work to find an agreement of how to proceed. The installation must be done with a temperature of minimum 15 °C, same for the underfloor. A/ Way of installation: - Normal:

ÉMISSIONS DANS L'AIR INTÉRIEUR A+ A B C Substances A+ principales : Émission totale : A+

- Optional: In this case one eliminates the glossmatt effects, but with more visible joints

R RAN

5

T

Y

RZ

A

YEARS

RA NTI

5

ANS

A

RA NTI

5

E

A

E

G

EN 649

G

2004 EN 14041

W

A+

ANS

GE

UE

US

Version du 1/09/2011 - Sous réserve deA modifications techniques I DOMEST

RA NT

Q


LIBERTY URBAN LVT Maintenance B/ Marking: Mark the departure lines. C/ Application of the tiles: • Apply the first row following a line perpendicular to the door. • Link the following row of tiles to the first.

5 - Fitting the planks: Attention! Check the products for visible defects prior the installation. Don’t install faulty planks or tiles. If any differences in aspect occur, contact your supplier before starting or continuing the work to find an agreement of how to proceed. The installation must be done with a temperature of minimum 15 °C, same for the underfloor. Installation principle: - Divide the floor surface in 2 parts with a line perpendicular to the entree of the room. - Put the first plank then to continue following the line. - Install the planks following the arrows on the back. - The first plank of the second row must be placed at 1/3 of the length in the lateral direction to bring the joints of the 3 rows in line. This is a better solution compared to the one that shifts by half a plank because less aesthetic. - Other installation possibilities: herringbone and specific ones…

6 - Spreading the glue: This is a compulsory operation to be done twice: - Manually with a buttress or strut. - With a heavy roller to pass on the total surface of the floor at the end of the installation, to evenly spread the glue under the tiles/planks.

7- P  utting into use / Circulation: - For normal walking traffic: after 24 hours. - Installation of furniture etc: after 48 hours. - No rubber caps of wheels. - In case of floor heating: start the heating progressively.

LIBERTY URBAN floors are PU surface protected for: - easy cleaning, - removal of products left on the surface, which may have been used for installation, A proper maintenance program protects the floor from wear and helps to maintain it’s appearance. We recommend for following the normal maintenance procedures according to the traffic in the given areas, and avoiding to blend maintenance products of different brands or compositions in all phases of cleaning operations. 1/ Before use Once fitting is completed, need to respect a minimum of 48 hours drying time. After that, just sweep or vacuum clean the floor off dust. A simple sweeping with a neutral detergent type Jontec Asset from Johnson or PU cleaner from Dr. Schutz to eliminate dirt before use. Clean with a monobrush at 200 rpm + red disk. (Possible with a brush turning up to 400 rpm, with an appropriate disk for the speed). The detergent is pulverised (spray). No need to rinse, just take some time to dry before the next operation. Flat clean with water, cleaning and/or protecting agent in the correct proportions. Once the surface is dry operate the mono brush with the red disk at a speed of 400 rpm. If no monobrush is available (apartment buildings, stair cases, small area’s and inaccessible ones) clean manually with a synthetic red or blue sweeping brush and a detergent till all stains are removed. No need to scrape the floor if the workshop has been realised according to the normal standards. In case a PVC floor is very heavily stained, repair will give it its initial appearance back (recommended repair products: Jontec N°1 from Johnson, Intensive Cleaner R from Dr.Schutz…). A monobrush treatment with 200 rpm or an auto washing device equipped with the red disk would do the job.

2/ Current maintenance Initial cleaning: Step 1 : Humid sweeping with trapeze brush + impregnated gauze. Step 2 : Flat wash with cotton cloth for the stained spots. Regular Maintenance: Step 1 : Humid sweeping with trapeze brush + impregnated gauze. Step 2 : Mono brush (≤ 400 rpm) + red disk + neutral spray detergent. Step 3 : Flat wash with cotton cloth. Step 4 : Polish with mono brush (≤ 400 rpm) + beige or white disk, after drying. Periodic cleaning: Step 1 : Humid sweeping with trapeze brush + impregnated gauze. Step 2 : Spread well the detergent solution and let it penetrate a couple of minutes. Monobrush (≤ 150 à 200 rpm) with red disk. Vacuum clean and rinse with always clean water. Dry. Step 3 : Flat wash with cotton cloth. Step 4 : Polish with monobrush (≤ 400 rpm) + beige or white disk. We recommend a systematic maintenance program for the high-traffic areas. Other maintenance methods, similar to the ones described above, can also be used. The frequencies are given for information. They will always adapt depending on traffic and the desired final appearance.

3/ Practical recommendations We remind that some products are forbidden: - Pure bleaching agents (possible if diluted at 10 %). - Strong solvents (like acetone…). - Glazing products and varnish (not to confuse with repair emulsions). These products can cause permanent discolorations of LIBERTY URBAN LVT. Never use aggressive disks during regular maintenance (like the black, brown or green ones).

4/ Protection Like all flexible flooring, LIBERTY URBAN LVT must be protected against indentation of furniture, sharp objects and other heavy objects. The use of leather, plastic or felt are recommended (no rubber or metal plates). The entrance areas need to be protected by walk-off mats, which are sufficiently large. Efficient walk-off protection zones are composed of the following elements: - a grid with feet scraper to eliminate stones etc, - a synthetic rug to take all the dirt and dust, - a textile rug to take away all humidity. The ideal length would be, for the three, 7 to 8 m, for areas of high traffic (to be sure that all dirt is eliminated from the shoes).


ĂŠdition 2012

www.liberty-llt.com

Homedecor International

Liberty Urban -kuvasto 2012  

Liberty Urban vinyylilankkujen ja -laattojen kuvasto 2012

Read more
Read more
Similar to
Popular now
Just for you