Page 1

Lippert Fifth Wheel Landing Gears

Fifth Wheel Landing Gears

Big Bad Foot Pad

101-LG1 Electric Landing Gear 634.79 101-LG183708 Manual Landing Gear 414.59

Telescoping, heavy-duty legs, large foot pads and sturdy mounting hardware make Atwood landing gears a great choice for supporting your fifth wheel trailer. Double tube extension allows inner tube to be dropped to the ground and pinned in 1” increments before final jacking to desired height. Heavy duty is a manual system with a 3,000 lb./leg capacity which may be converted to electric by purchasing the optional motor kit. (Sold separately). Super duty is electric only with a 4,000 lb./leg capacity and must use 2) 55-75391 motors, sold separately. 54-75333 54-75362

Heavy Duty Super Duty

Motor Kit, HD

42-29160 65.79

Power Twin II Stabilizing Jack

Introducing the only stabilizer product that lifts, levels and stabilizes all at the same time. Adds the capacity to lift the trailer with up to 6,000 lbs. of rugged power. Each side can be elevated to a height of 30” independently or simultaneously. Stops front-to-back motion and side-to-side motion at the same time. Adjusts from 48” to 77” wide. 1 per box.

624.89 1232.49

12 volt motor kit comes complete with mounting hardware, wire, on-off switch and instructions. 55-75391

101-LG217884 Motor & Switch 221.89 101-LG179013 Lead Leg 29-1/2” 178.49 101-LG179014 Follow Leg 29-1/2” 178.49 101-LG179015 Alum Gear Box 64.29 101-LG119225 Foot & Pin (Rect) 12.49 101-LGXS Telescoping Tubes 74.29 101-LG119226 Manual Crank Handle 27.39 101-LG142178 Motor Only 155.49 101-LG145236 Switch & Cable 79.29 101-LG210475 Round Foot Pad 9” 58.59 101-LG-BRACKETS Weld-On Brackets 37.29 101-LG146059 Gear Kit (Lead Leg) 56.89 101-LG146060 Gear Kit (Follow Leg) 51.79

Universal fit extra large 10” foot pads work on all types of manual jacks, electric jacks and landing gears. Heavy duty, thick gauge steel with superior rust inhibitive finish. Includes mounting brackets and hardware. Easy installation. Pair.

Fifth Wheel Snaps

369.79

24-39-941705

889.79

Ultra Fifth Wheel Electric Landing Gears Lifts, levels and helps stabilize your 5th wheel at the flip of a switch. Two, powerul, independent 12 volt motors eliminate old fashioned cranking. Allows for proper positioning of both foot pads firmly on the ground. Features a 21” down stroke, plus adjustable extensions that create up to 38” of total lift distance. Built-in slip clutch prevents damage from over extension. Extra wide foot pads prevent sinking. 12,000 lb. dual motor system. 24-17-943010

Hook-up or unhook 5th wheel in minutes with these spring-loaded pins. Standard snaps fit 2-1/4” square inner legs with 7/16” diameter holes. Heavy-duty snaps fit 2-1/4” square inner legs with 1/2” diameter holes. 2 per pkg. 57-19330 57-26810

Standard, 7/16” Heavy duty, 1/2”

69.89 73.99

Questions? Pantera’s knowledgeable staff is ready when you are! Call us and let us help you with your order!

769.89

Same Day Shipping On Most Items

www.PanteraSales.com

Jacks & Levelers

Takes the effort out of raising and lowering your Fifth Wheel. Handles 6,000 lbs. with a 21” stroke and inner tube that extends an additional 16” - 1” at a time. The IP rated switch an be mounted in your bottle gas area with no fear of a spark. Features the most widely used parts in the industry.

167


Jacks & Levelers

168 Ultra Adjustable Foot Pad Eliminates the need for wood blocks by adding up to 3/4” of vertical fine-tune adjustment. Our jumbo 8” x 5-1/4” foot pad eliminates trailer sinking. Made from #7 gauge steel, the outer pad edges won’t bend. Each. 24-17-940007

38.29

“C” Series Jacks

Telescopic Stabilizing Jacks

Combines the strength of a leveling jack with the steadiness of a stabilizing jack. Low profile design is perfect for travel trailers and fifth wheels. Rapid extension provides fast leveling. Integrated foot pads for secure footing. Features corrosion-resistant finish. Includes crank handle. Foot pads, telescoping channel and motor kit sold separately. 2 per set. 42-23219 42-23222 42-23225 42-23228 42-23231 42-23200 42-23205 42-23212

19” 22” 25” 28” 31” Foot Pads 2/Set Telescoping Channel 12V Motor Kit 2/Set

104.89 109.39 113.69 117.49 119.89 14.99 17.89 459.29

Ultra Foot Pad Our jumbo 8” x 5-1/4” foot pad eliminates trailer sinking. Made from #7 gauge steel, the outer pad edges won’t bend. Each. 24-17-940006

Powered “C” Jack Kit

24.79 Dual 12v motor stabilizer cross frame jack system allows for independent operation of the 25” legs using included two switch plate. Simple installation. Made in the USA. 42-21100005 448.79

HOW TO SELECT A STABILIZING JACK

FIRST: Review the diagram (to the left) and measure your underbody frame to ground, as illustrated. Write it down. Knowing your (A) dimension study the Selection Chart (below) and choose the model that fits the measurement.

BAL STABILIZING JACK SELECTION CHART A Dimension Length

Leg Model Numbers Telescopic “T” Type

UP TO 16” 20”

22630 22652 (Set of 2) 22655 (Set of 4)

16”+ To 20”

24”

24830

20” & OVER

30”

30930

Check out the other sections of this catalog for our expanded product line!

Easy to install and requires no existing trailer frame crossmember. Fits most trailers, front or rear, and mounted as an assembled unit. 2,000 lb. static load per individual jack. 2 jacks with 1 crank handle per pkg. Base pads sold separately. 42-24830 42-30930 42-25001 42-20032 42-20033

24-8, 16” to 20” 30-8, Over 20” Extension Leg Crank Handle Base Pads-Set/2

179.89 219.79 30.79 27.59 23.79

Base Pads Use on all BAL T-Type and telescopic stabilizer jacks only. Use 42-23035 on BAL tent trailer stabilizer jacks. 42-20031 42-20033 42-23035

Set/4 Set/2 Tent Trlr Pads, Set/4

39.89 23.79 28.99

Tent Trailer Stabilizing Jacks Use on tent trailers, lightweight travel trailers and fifth wheels with up to 16” of clearance from frame to ground. Bolt-on application with crank handle and mounting hardware included. Features rust inhibitive coating. Base pads sold separately. 2 per set. 42-23025 17” 42-23026 20” 42-23035 BasePads-Set/4

78.79 78.79 28.99

Toll-Free Phone Orders - 800-456-0123 Toll-Free Fax Orders - 800-746-2204


Scissor Jack Power Pack

Scissor Jacks

Slotted cordless drill adapter works with BAL tent trailer jacks and more. Each. 42-21100003 15.79

Universal mounting for all RV’s, front or rear. May be extended from 4” to 24”. Heavy duty all steel construction with black rust inhibitive coating. 2 per set.

Olympian

42-24002D 42-24003D 42-24002C

Power your scissor jack with this optional 12 volt motor kit. Get nearly automatic stabilizing at the touch of a button. Lightweight, high RPM kit is easy to install. For use with deluxe and standard scissor jacks. For lowering and raising only, not for lifting. 2 per set with control.

Scissor Jacks

7,500 lbs, 24” 7,500 lbs, 30” 5,000 lbs, 24”

114.89 159.89 108.79

3/4” Cordless Drill Adapter

42-24210

379.89

Scissor Jack Socket Reduces time and effort in raising and lowering your scissor jacks. No need for hand cranks. Works with all 3/4” hex drive jacks. Features a 3/4” hex socket with a 1/4” hex quick-connect shank. Forged steel socket is zinc plated for corrosion protection. 1 per pkg.

66-57364 8.49 Bolt-on or weld-on to lift and stabilize pop-ups and trailers. 6,500 lb. load capacity. Includes speed crank handle. Powder coated for maximum rust protection. 2 per box. 66-57421

102.79

3/4” cordless drill adapter for raising and lowering jacks and levelers with a 3/4” socket. Each.

Stack Jacks™

42-21100004 14.89 Allows for secure and level RV positioning and structural stability. Set of 4.

Scissor Jacks LoPro SJ24 Scissor Jacks

66-44560 Heavy-Duty steel scissor jacks bolt or weld to the frame. (bolts not included). Strong worm gear mechanism will not slip. Large footpads combat sinking and tilting. Durable powder coat finish. Includes crank handle. 2 per set. 24-48-979002

6,500 lbs, 24”

98.79

57.89

New design allows for lighter jack without sacrificing strength. LoPro SJ24 is an economically priced USA made product. Faster up & down operation. Wider frame mounting brackets for improved stability. 5,000 lb. lifting capacity. Extends from 3-5/8” to 24”. E-coated for superior rust protection. Mounting hardware and crank handle included. 2 per set. 42-24028 88.79

Same Day Shipping On Most Items

www.PanteraSales.com

169

Jacks & Levelers

Slotted Cordless Drill Adapter


Jacks & Levelers

170

Universal Slidewinders One size and model fits all slide-out rooms. Keeps your slide-out room level and prevents damage when extended for long periods of time. Adjusts from 19” to 47” above ground. Heavy-duty steel construction with powder-coated finish to resist rust. Cradle fits slide-out tubes out to 4-1/4”. Features extra-long “easy turn” handles. Static load capacity is 5,000 lbs. 2 per box.

King Pin Lock King Pin Tripod Stabilizer Jack Provides maximum front-to-back and sideto-side stability for fifth wheel trailers with king pin height from 38-1/2” to 50”. Make major adjustments by moving the foot pads and fine tune with the screw level adjustment. Steel tube construction. Coated for maximum rust protection. Folds down for easy storage. Certified 5000 lb. capacity. Fully assembled. 1 per box.

57-31340 99.89

66-57391

Universal Slide-Out Supports Slide Out Supports help protect your RV’s slide out mechanism by roviding support to your slide out room when it is in use for prolonged periods. The universal fit top will support any slide out rail, and the space saving handle and tethered pin make the support easy to use and store. Adjusts from 19” to 47”, with incremental locked positions, plus minute adjustment that extends an additional 14 inches. These durable supports are constructed of rust-resistant steel and support up to 5,000 lbs each. Boxed. 66-48866 66-48867

Set of 2 Each

123.79

Deters theft of fifth wheel trailers. Locks BAL fifth wheel stabilizing jack to the King Pin. Fits BAL Stabilizer models 25015, 25030 or on King Pin only. 1 per pkg.

42-25020

34.29

Gooseneck Tripod Stabilizer

King Pin Tripod Stabilizer Jack Stabilize even the heaviest 5th wheel for full front-to-back and side-to-side motion. Sets up in less than a minute. Features an adjustable threaded hitch cup for quick and easy fine tune adjustments. Extra large 5” x 5-1/2” foot pads. Includes padlock to deter theft. 1 per box. 24-19-950001 Steel 24-19-950200 Aluminum

Provides full side-to side overhang stability and helps maximize front-to-rear trailer stability. Easy to setup. Heavy duty steel construction, black powder coat and zinc plate finish for maximum corrosion protection. Lightweight and easy to store. 1 per box. 42-25037

152.89

179.89 219.79

109.89 57.79

Check out the other sections of this catalog for our expanded product line!

Toll-Free Phone Orders - 800-456-0123 Toll-Free Fax Orders - 800-746-2204


Gooseneck Tripod Stabilizer

66-57382

109.89

Alumilite Gooseneck Tripod

171

FASTJACK King Pin Stabilizer

King Pin Tripod Stabilizer

FASTJACK is the lightest king pin stabilizer on the market offering full adjustability on all three legs. Slips onto king pin to support the FASTJACK and uses gravity to assist in setup. No need to worry about uneven ground as each leg adjusts independently using the integrated ratchet system. Collapses for easy storage. Features rust inhibitive finish and large base pads. Weights only 15 lbs. No assembly required. Includes padlock. 1 per box.

Provides full side-to-side frame overhang stability and helps maximize front-to-rear trailer stability. Easy to setup. Heavy duty steel construction, black powder coat and zinc plate finish for maximum corrosion resistance. Each.

42-25066 42-25067

FASTJACK Gooseneck Adapter

42-25035

197.49

123.89 13.89

Lock-Arm Stabilizing Bars

Ultra lightweight aluminum gooseneck tripod stabilizes horse trailers and fifth wheel trailers with gooseneck adapters installed. Extra large 5”x5.5” footpads help combat sinking and tilting. Features collapsible adjustment handle and adjusts from 34” to 44”. Weighs just 18 lbs. Each.

Folding King Pin Stabilizer

24-19-950400 228.79

FASTJACK Fulltimer King Pin Stabilizer Heavy duty kingpin stabilizer that mounts to pin & uses gravity to assist in setup. Unique ratchets tension upward allowing adjustment on each leg independently. Made in USA. Each.

42-21100000 196.89

The folding king pin stabilizer is coated with zincchromate which resists rust and corrosion. Folds down to only 28” making it easy to store. Extends up to 51”. Weighs only 17 lbs. For stabilizing only, not for lifting. Each. 106-10001

42-23216

102.79

King Pin Stabilizing Jack

Provides maximum stability for frame overhang of fifth wheel trailers.  Sets up in seconds. Lightweight, easy to store. Heavy duty construction includes one heat treated jack post, chain, hooks and large base pads. Each. 42-25030 Telescopic

Same Day Shipping On Most Items

136.79

Attaches between the frame and leveling jacks to increase stability and eliminate most trailer movement. Mounts to most leveling jacks with a unique swivel mount and works at various angles. Telescoping tubes travel up and down with jack for easy setup and storage. Works on fifth wheel landing gears, scissor jacks and single leg crank down jacks. Includes two Lock-Arms and mounting hardware.

172.89

Be sure to check out the other sections of this catalog for our expanded product line! Pantera has everything for your RVing needs!

www.PanteraSales.com

Jacks & Levelers

Reduces movement on your gooseneck trailer when parked. Works with horse trailers and fifth wheel trailers with a gooseneck adapter installed. Heavy duty steel construction. Powder coated for maximum rust protection. Features large foot pads and zinc plated chain. 7500 lb max load capacity. Adjusts from 30” to 44”. Each.


Jacks & Levelers

Powerful 12 volt motors and push button operation takes the physical exertion out of cranking your trailer up or down. Simply push the button to quickly and effortlessly raise or lower trailer into position. 1 per box.

54-80236

289.49

Premier Power Jacks

279.89 279.89 349.79 349.79

Lift up to 3,500 lbs. a full 18” with this high power jack. Helical cut gears reduce noise and improve efficiency. Textured casing helps protect from chips and cracks. Four LED night light. Extra-large foot pad. Includes hardware, pins and manual crank handle. 1 per box.

Black

2500 lb, Black 3500 lb, White 3500 lb, Black

238.79 329.79 329.79

57-30826 57-30828 57-31558

Lift up to 2,500 lbs. a full 18”. Features a builtin level, extra large foot pad, rust resistant finish, a large 2” diameter post and built-in torque limiter. 1 per box.

337.89 389.49 437.29

Lift up to 3,500 lbs. a full 18”. Features a low friction ball screw, builtin level, 12V “nite lite”, auto shut-off, emergency “crankthrough”, rust resistant finish, extra large foot pad and 2-1/4” diameter post. White jack with black post. 1 per box.

57-27448 Black 57-27450 White

349.79 349.79

Deluxe Hi-Power Jacks

57-27300 57-27295 57-27265

3000 lb, 2-1/4”, 18” 3500 lb, 2-1/4”, 18” 3500 lb, 2-1/4”, 24”

Super Hi-Power 3500 Jack

57-27452

White/Black

519.89

eaz-lift 4000 Power Jack

Lift up to 3,000 lbs a full 18”. Features a builtin level, a “nite lite”, auto shutoff, emergency “crank through”, extra large foot pad, and rust resistant finish. 1 per box.

Hi-Power 3500 Jack

84-285318

101-JET2500 101-JET3500 101-JET3700

Hi-Power Jacks

Powerful 12 volt motors and push button operation takes the physical exertion out of cranking your trailer up or down. Simply push the button to quickly raise or lower trailer into position. Features bubble level, improved LED light, aerodynamic cover and external manual override. Full 19” of stroke. Also comes with ROBOFOOT, which adds 6” of travel when extended, locks into place and automatically retracts when jack is raised. Uses 2-1/4” tubing and fits most 2-5/16” couplers. 1 per box.

3000 lb., White 3000 lb., Black 4000 lb., White 4000 lb., Black

Features easy to operate switches, a night light and a level. Includes large footpad, weather resistant head, emergency crank and rust resistant powder coat finish. 1 per box.

Lift up to a full 18” of travel. Features a large 3-bulb LED night light, extra-large removable foot pad, and emergency crank through socket. 2-3/16” heavy wall outer tube. Heavy duty 10 gauge connection with 30 amp fuse. 1 per box.

The Lightweight Power Jack uses 1-7/8” tubing and is specially designed for smaller trailers with a 2” coupler. Lifts 1,500 lbs.

54-81067 54-81068 54-81069 54-81070

VIP Power Jacks

Hi-Power Jacks

172 Power Jacks

Black, 2-1/4” White, 2-1/4” Black, 2”

399.89 399.89 399.89

Safely raises and lowers today’s longer, heavier trailers with a press of a switch. Utilizes a ball screw lifting mechanism which raises loads up to three times faster than conventional electric tongue jacks while using less power. Features an overriding clutch to protect against overloading, steel gears and an aluminum gear box. Equipped with an LED light, front-entering manual crank handle and sleek black design. 4,000 lb. lifting capacity and 20” of stroke. 1 per box.

289.79 66-49000 499.79

Check out the other sections of this catalog for our expanded product line!

Toll-Free Phone Orders - 800-456-0123 Toll-Free Fax Orders - 800-746-2204


Side Wide Jacks

Ultra 4000 Power Jacks

24-38-944014 24-38-944016

42-29015B 42-29025B

51.79 59.79

w/lights 403.69 w/out adj. ft. pad 379.89

33-155022 33-1750290317

233.89

33-155157

2,000 lb.

69.89

Extended Standard

14.99 15.79

Top Wind Jacks

Side Wind Jacks A-frame side wind jacks with 14” travel. Black painted finish. Castor or foot pad sold separately. Each.

1,000 lb. 2,000 lb.

42.89 56.79

Keep your tongue jack leg from sinking into soft ground. The extended foot pad requires less cranking from your jack. Fits 2” jack tubes and includes a locking pin to secure foot pad to the jack leg during travel. Fits jacks with a weight capacity up to 2,000 lbs. 1 per box. 42-29055B 42-29056B

54-80000 54-87510

Side wind jacks with A-frame weld-on/bolt-on brackets. Features rolled acme threads, anti-friction thrust bearings and highstrength tubing. Primed. Each.

The tough power jack for today’s longer and heavier trailers. 3,500 lbs. of lifting power with extra breakaway power to get free from a jammed hitch ball. Travels 10” in 30 seconds and has a full 18” of stroke. Features the exclusive dual Site-Lites for after dark operation. 1 per box.

w/lights

2,000 lb. 5,000 lb.

Foot Pads

Side Wind Jacks

Ultra 3500 Power Jacks

24-38-944017

1,000 lb. 2,000 lb.

Top wind jacks with A-frame weld-on/bolt-on brackets. Features rolled acme threads, anti-friction thrust bearings and high strength tubing. Primed. Each.

51.49 56.79

Heavy duty top wind A-frame jacks with corrosion resistant black E-coat finish. Constructed of high strength tubing, precision metal gears and high performance bearings. A-frame weld-on or bolt-on mount. 1,000 lb. has 1-7/8” OD tube. 2,000 lb. and 5,000 lb. have 2-1/4” OD tubes. 1 per box. 42-29020B 42-29030B 42-29033B

1,000 lb. 2,000 lb. 5,000 lb.

Swivel Caster Wheel

49.89 52.79 55.49

Heavy duty swivel caster wheel makes rolling your trailer around easer than ever. With a weight capacity of 1,000 lb. and fits tongue jacks with a weight capacity up to 2,000 lb. (2” OD). Each. 42-29041B

Same Day Shipping On Most Items

29.99

www.PanteraSales.com

Jacks & Levelers

The tough power jack for today’s longer and heavier trailers. 4,000 lbs. of lifting power and 5,000 lbs. of breakaway power to get free from a jammed hitch ball. Travels 10” in 30 seconds and has a full 18” of stroke. Features a built-in adjustable foot pad that reduces travel time and the exclusive dual Site-Lites for after dark operation. 1 per box.

173

Top Wind Jacks

Heavy duty side wind A-frame jacks with corrosion resistant black E-coat finish. Constructed of high strength tubing, precision metal gears and high performance bearings. A-frame weld-on or bolt-on mount. 1,000 lb. has 1-7/8” OD tube. 2,000 lb. has 2-1/4” OD tubes. 1 per box.


Jacks & Levelers

174

Tongue Twister

X-Tended X-Chock

Use to easily move trailer tongue. Side-to-side diagonal placement aligns coupler to ball with pin-point accuracy. Zinc plated steel inhibits rusting. Chrome plated ratchet wrench included. Each. 42-28100

Tire Locking Chock

The same great function as the standard X-Chock but for wide track axle spacings on some OEM trailers. Extends out to 17”. Includes one chock and one handle per box.

Prevents trailer from rolling. Locks tandem wheels by applying opposing force to tires. Aids in trailer stabilizing. Rust inhibitive coating. Includes handle. Extends from 15-1/4” to 23-1/8”. Each.

42-28014 99.89

42-28000

71.49

Tongue Jack Stand Heavy duty, durable jack stand stabilizes your trailer tongue without heavy cinderblocks or wood. Provides a sturdy base with 5,000 lb. weight capacity. Evenly distributes the weight, helping it not sink into the ground. Lightweight and easy to store. UV stabilized for many years of use. Each.

Wheel Stop w/Lock Prevents both forward and backward movement while parked or re-hitching. Installs easily between tandem tires, stabilizing your trailer. Features a lock and locking bar for added security. 1 per box.

Chock & Lock

Put a stop to trailer rock. Eliminates front-to-back motion by anchoring the opposing wheels of tandem axle trailers and fifth wheels. One piece with easy to use lever. Can be locked to deter theft (padlock not included). Heavy gauge steel construction with corrosion resistant zinc plating. 24-21-001060 24-21-001070

1 per box 2 per box

66-44635 17.29 66-44642

36.89

Trailer Tongue Jack Stand

51.79 101.89

• Supports the trailer tongue without the worry of sinking into the asphalt on hot days. • Eliminates the need to tote and store bulky wood blocks. • Weighs only 2 lbs. • Holds up to 10,000 lbs. • Perfect for RV or boat trailer. • 8-5/8” diameter x 8-3/8” high.

Single Axle Locking Chock X-Chock Locking Chock Provides added stabilization by applying opposing force to your tandem tires. X-Chock works with your tires natural movement instead of against them. Retracts down to 1-3/8” and extends up to 12”. Lightweight and easy to store, features rust inhibitive coating and plated ratchet wrench with comfort bumper. 42-28012 X-Chock kit comes with 2) 42-28010 X-Chocks and one ratchet wrench. For added security, lock with optional 42-28015 BAL pad lock, sold separately.

53.79

45-A10-0900 Prevents trailer from rolling and aids in trailer stabilizing. Perfect for tent trailers. Rust inhibitive coating. Lightweight, easy to store. Each. 42-28020

42-28010 Each 59.79 42-28012 Pair 108.79

Check out the other sections of this catalog for our expanded product line!

75.69

21.79

Wheel Dock

Keeps trailer tongue from rolling on pavement or sinking in soft ground. Each. 66-44632

20.79

Toll-Free Phone Orders - 800-456-0123 Toll-Free Fax Orders - 800-746-2204


Large Stabilizing Jack Pads

No more sinking in the mud - no more dents in the driveway. Use with trailer pad and wheel jack stands. Rope handle to easily lift off the ground. Tough enough to drive over. Guaranteed not to crush, crack or break down. It even floats. Each.

Helps prevent jacks from sinking with larger 14”x12” size and heavy-duty construction. Built-in handle and optimized rib design for increased strength. Made of UV stabilized resin. Storage strap included. 2 per pkg.

32-SA6200

66-44541

35.79

Super Dolly Trailer Pad

175

Provides a safe and easy way to prevent stabilizer legs on larger trailers and buses from sinking into the ground. Weight tested up to 100,000 lbs. Measures 15” x 17” x 1” thick.

20.89

72-87825 2-Pack

123.89

Level Trek Jack Pads

Jack Pads w/Handles Hand-E-Blok

The new, low-cost solution to keep your trailer safe and secure. Made of 100% recycled plastic, Hand-E-Blok supports shaft, plate and wheel tongue jacks. Supports up to 5,000 lbs. Each. 120-HEB1

29.89

66-44543 21.89

Super Jack Pads

Stabilizing Jack Pads Designed for use with stack jacks, fifth wheel stabilizers and awning arms to keep them from sinking into soft ground. Interlocking for convenient storage with handy strap. Built-in handle for ease of use. Solidly constructed of durable polypropylene with UV inhibitors. 4 per pkg. 66-44595

Designed to keep jacks and levelers from sinking into soft ground. Handle provides an extra 13” of reach. Features interlocking design and storage strap for easy storage. Pad measures 14” x 11.7”. Set of 2.

4-Pack

18.79

Same Day Shipping On Most Items

2-Pack 4-Pack

53-LT80050

2-Pack

12.39

Lynx Levelers

Place under stabilizing jacks and levelers to prevent legs from sinking into the ground. Weight tested up to 40,000 lbs. Lightweight and easy to use. Measures 10” x 14” x 3/4” thick. 72-27257 72-47257

Super duty jack pads protect against sinking into soft ground and prevent damage on paved surfaces. Weight tested up to 110,000 lbs. Measures 14”L x 10”W. 2 per set.

37.89 73.49

Just stack the interlocking blocks into a pyramid and drive on to level your RV. Very strong and durable. Easy to clean. Ten pack comes in a durable nylon storage bag. Optional cap provides a full flat surface. 62-00015 10-Pack 62-00016 4-Pack 62-00019 Cap, 4-Pack

49.89 20.69 21.79

www.PanteraSales.com

Jacks & Levelers

Trailer Doc


Jacks & Levelers

176

Leveling Blocks

FasTen Leveling Blocks

Wheel Stop ‘N Chocks

The perfect accessory for your Lynx Levelers. Just use the self-positioning chock and you’ll hit the top of the stack every time. Very strong and durable. Easy to clean. 62-00018-1 Each 62-00018-2 2-Pack

Stack interlocking blocks to desired height for safe and easy leveling. Strong and durable construction with a solid bottom so they will not sink into the ground. Can be used with wheels, jacks, stabilizers and more. Includes durable storage bag.

16.79 32.89 FasTen leveling blocks allow you to stack the interlocking blocks to the desired height for safe and easy leveling. Each block adds a full inch to stack height. Convenient carrying handle easily pulls up for carrying, or twists down to secure blocks together for storage. Strong, durable and UV stabilized. Stack height should not exceed 4-1/2”.

Level Trek Levelers

66-44512 66-44515 66-44521 66-44525 Just stack the interlocking blocks and drive on to level your RV. Super strong and durable. Easy to clean. Twelve pack includes 8 full size blocks, 4 half size blocks and a nylon carrying bag. Four pack includes 4 full size blocks. Weight tested up to 30,000 lbs. 53-LT80010 53-LT80020 53-LT80030

12-Pack 4-Pack Half Blocks4-Pack

2x2, Yellow 10-Pack 4x2, Yellow 10-Pack 2x2, Brown 10-Pack 4x2, Brown 10-Pack

66-44501 4-Pack 19.79 66-44505 10-Pack 46.89

Leveling Block Wheel Chocks

53.49 83.79 53.49 83.79

Non-Slip Flex Pads

Connect to Camco’s leveling blocks to level and chock simultaneously. Makes stabilizing and centering wheels easier. Sized for larger vehicle wheels. Ideal for RV’s, trucks and trailers. Leveling blocks sold separately. 2 per pkg.

46.89 19.29 9.49

66-44401

29.79

Stabilization Kit w/Duffle Stacker Levelers & Jack Pads

Leveling block non-slip flex pads help prevent jacks and stabilizers from linking into soft ground and uneven surfaces such as gravel, tree roots, etc. Nests perfectly with Fasten™ leveling blocks. UV resistant and weatherproof. 2 per set. 66-44600 66-44601

14 piece stabilization kit includes everything you need to stabilize your trailer and a convenient storage duffle bag. Includes 2 tri-levelers, 2 wheel chocks, 4 regular and 2 large jack pads, 2 wheel stops, 1 tongue jack stand and duffle bag. 66-44550

2x2, 8-1/2” x 8-1/2” 4x2, 8-1/2” x 17”

43.69 68.99 Stackers may be used for leveling, jack or tongue wheel support. Interlocking jack pads stack to required height and holds up to 40,000 lbs. Snaps together for storage. 45-A10-0916 4/pk 45-A10-0918 10/pk 45-A10-0920 10/pk w/bag

21.79 49.89 53.79

164.89

Check out the other sections of this catalog for our expanded product line!

Toll-Free Phone Orders - 800-456-0123 Toll-Free Fax Orders - 800-746-2204


Tri-Leveler

Camco Wheel Chocks

177

Wheel Chock, Red

66-44573 25.79

They keep your trailer in place so you can re-hitch with confidence. Solidly constructed of durable hard plastic.

BLAYLOCK

66-44412

45-A10-0908

6.19

5.79

EZ Jack Steel Wheel Chock

Wheel Chock w/Rope

Easy-to-use, safe and reliable device for changing tires on tandem axle trailers. Just drive onto the EZ Jack to elevate the tire to change. Made of heavy-duty, cast aluminum. Weighs less than 9 lbs. Rated to accommodate weight up to 20,000 lbs. 117-EZ100 112.79

Keep your trailer in place so you can re-hitch with confidence. Solidly constructed of durable, hard plastic. Includes nylon cord for easy removal. Each.

Heavy duty steel wheel chock is great for changing tires, parking, hitching and storage. Each.

66-44472 6.59

81-14089

13.79

Super Wheel Chock Tandem Wheel Chock Extra Large Wheel Chock

Keeps your vehicle and trailer stationary. Durable polypropylene with UV inhibitors. Each. 66-44492 12.49

Super Wheel Chock w/Rope

Helps keep you tandem axle trailer in place. Made of durable hard plastic with UV-inhibitors. For use with tires up to 26” in diameter. May also be used as a tongue jack stand with 400 lb. max tongue weight. Each. 66-44435 15.49

High impact plastic, 44% larger than standard chocks. Designed for wider RV wheels. Ideal for parking, hitching and storage. Each. 81-14079

Helps keep your vehicle and trailer in place. Durable polypropylene with UV inhibitors. Includes nylon rope for easy removal. Each. 66-44475 13.99

Same Day Shipping On Most Items

8.99

Call us toll-free today and let us help you with your order! Pantera has everything for your RVing needs!

www.PanteraSales.com

Jacks & Levelers

Raise RV’s up to 3-7/8” on any tire for more level positioning. Lightweight, durable resin with a non-slip surface. Load capacity is 3,500 lbs. Yellow. Each.

Prevents tires from rolling and sliding. Has rubber surface for better grip, and nylon cord to easily remove the chock when finished.


Jacks & Levelers

178 Wheel Chock

Screw-On Levels

2-Way Utility Level Checks two directions at once. Portable or permanent mount. 1 per card.

37-28-0152 37-28-0153

White Col. White

4.79 4.79

66-25523 4.29

Super duty chock helps keep your RV in place. Weight tested up to 4,500 lbs. Measures 7.8”L x 4.7”W x 4.3”H. Each. 53-LT80060

Screw-mounted levels provide front-to-back or side-to-side leveling. 2 per pkg.

3.89

Magnetic Level

Screw-On Level

Checks two directions at once. A strong built-in magnet holds fast to steel RV frames. 1 per card.

Jumbo Wheel Chock

37-28-0501

7.49

Simplify your campsite setup with screw-on levels. Adhesive backing and screw holes for permanent mounting. Screws included. 2 per card. 37-28-0141 37-28-0142 37-28-0143

Black White Col. White

4.89 4.89 4.89

Stick-On Levels Jumbo super duty wheel chock keeps your RV in place. Chock can be used alone or can interlock with the Level Trek levelers. Weight tested up to 10,000 lbs. Measures 8.5”L x 8.5”W x 4.8”H. Each.

Bullseye Level

53-LT80040 8.29

Simplify your campsite setup with stick-on levels. Adhesive backing allows tool-free installation. 2 per card.

T-Level

Screw-mounted level for front-to-back and side-to-side leveling. 1 per pkg. 66-25543

Round domed level reads 360 degrees at once. 1 per pkg.

1-3/4” x 1”

4.59

Motorhome 37-28-0111 37-28-0121 37-28-0131

Black White Col. White

Fifth Wheel 37-28-0113 37-28-0123 37-28-0133

Black White Col. White

Travel Trailer 37-28-0112 Black 37-28-0122 White 37-28-0132 Col. White Rectangle 37-28-0114 37-28-0124 37-28-0134

Check out the other sections of this catalog for our expanded product line!

Black White Col. White

4.89 4.89 4.89

4.89 4.89 4.89

4.89 4.89 4.89

4.89 4.89 4.89

66-25573

2-1/2” Diameter

4.29

Call us! We are ready when you are! Be sure and check out our website! www.PanteraSales.com

Toll-Free Phone Orders - 800-456-0123 Toll-Free Fax Orders - 800-746-2204


RV EzLevel

Bubble Level

179

Popular round bubble level is used for all types of leveling jobs. 1-3/4” diameter. 1 per pkg. 37-28-0201

3.89

Just place the factory-calibrated RV EzLevel in the center of the RV for fast, accurate and easy leveling of the entire RV, ensuring not only a level refrigerator, but a good night’s sleep. Solid state electronics levels both axes. Easy to stow. 1 per pkg.

Check out all our products at www.PanteraSales.com

66-25505 58.79

Questions? Give us a call ... we are ready to help!

RVing Through History By the end of World War I, Americans were camping in their cars. They added tents, beds and cooking facilities to the family car and hit the road.

RVs sold in the 1930s used aircraft-style construction and came equipped with beds, dinettes, electricity, and water.

From tiny do-ityourself kits to plush 30-foot models, travel trailers came into their own as true towable RVs by 1950.

In the 1920s, RVers built homes-on-wheels. They made simple wooden houses in their backyards and placed them on Model ‘T’ chassis.

As the popularity of RVs increased, so did the need for campgrounds with more

Many of today’s RV manufacturers started production in the 1950s and 1960s.

After World War II, the RV industry flourished as more Americans sought mobility.

The RVs evolutionary path includes advances in aerodynamic design and interior comforts.

RV camping clubs date back to the Tin Can Tourists of the 1920s and 1930s. The Tin Can Tourists were RVers who braved dust and mud to drive their Tin Lizzies across the U.S. before transcontinental roads were paved. They camped by the side of the road, heated tin cans of food on gasoline stoves, and bathed in cold water.

Same Day Shipping On Most Items

facilities.

Excerpt from

www.PanteraSales.com

Jacks & Levelers

Pantera has everything for your RVing needs!

Pantera Sales Jacks 2017  
Read more
Read more
Similar to
Popular now
Just for you