Annual Report 2008
Page 86
4.
Asian Marine Services Public Company Limited
Engineering Work
The Company is also capable of fabricating and repairing afloat and offshore constructions, steel work structures for bridges, heavy industries, oilrigs as well as factory components.
Important Equipments
1. The two floating docks with the Maximum capacity of 20,000 DWT and 8,000 DWT are as follows; Floating Dock
Dimension
Lifting Capacity
Maximum Vessel
Crane
Asimar 1
80 x 19.6 m.
5,000 t.
8,000 DWT
Asimar 2
161 x 28 m.
8,500 t.
20,000 DWT
2 x 12 t. 2 x Dock-knight
2. The shipyard has two separate slipways with 20,000 square meters area for production.
3. Several equipments such as large cranes and indoor workshop are available to assist repairing works effectively. Type
Amount
1. CNC (Computer Numerical Control) Cutting Machine
2 set
2. Gantry Cranes 100-tonne
1 set
3. Gantry Cranes 10-tonne
3 sets
4. An additional blast workshop
1 shop
5. Dock knight
2 set
6. Gantry Cranes 5-tonne
6 set
General Service Providing : HULL
MACHINERY/ELECTRICAL
TEST
Cleaning
Main / Auxiliary engine repair
Non-destructive tests (NDT)
Sandblasting / Gritblasting
Boiler / Condenser repair
Ultrasonic gauging
High pressure water jet (800 bar)
Propeller
Magnetic particle test
Tank and oil cleaning
Propulsion shaft
Radiographic test
Anchor and chain cleaning
Pipe Fitting
Dye penetration test
Painting and Coating
Electrical / Electronic
Cargo gear load test (up to 350 t.)