Page 1

Tangling jets Temco® LD32N LD32N with quick-change in modular design as single or multiple system Temco provides the tanglelacing jet LD32 in modular design to comply with the requirements for ever increasing thread speeds for processing technical yarns, e.g. glass fibres and carpet yarns. This air jet fits on all spindraw texturing machines known on the market for initial equipment or upgrading. Theses jets are suitable to process yarns up to dtex 10,000 at thread speeds of up to 4,000 m/min depending on the relevant titer. Jet inserts made of special ceramics Air jet inserts made of special ceramics with optimized blast and thread duct cross sections help: -

to reduce air consumption, to attenuate noise emissions, to obtain better textile technological values, to handle yarns more smoothly, and to increase service life of jets considerably.

A suitable material allows a good reproduction of geometry, shape and surface of air and thread ducts, and ensures a high uniformity. The interchangeable ceramic inserts allow to set either hard, soft, short or long knots in line with the requested tanglelacing.

LD32 as onefold and twofold system

Lowering air consumption The optimized air and thread ducts enable to obtain the requested tanglelacing by a lower volume stream compared with conventional jets. Yarn qualities and cost-effective air consumptions can be predetermined by selecting adequate jets with suitably dimenstioned ceramic inserts. An optimized efficiency of the jets is ensured by suitably designed and arranged air connections.

BCF yarn with tanglelacing knots

Oerlikon Textile Components GmbH ⋅ Branch Hammelburg Fuldaer Str. 19 ⋅ 97762 Hammelburg, Germany T +49 97 32 87 0 ⋅ F +49 97 32 87 310 sales.temco@oerlikon.com ⋅ www.components.oerlikontextile.com


Tangling jets Temco® LD32 Identification LD32

Range of jet types for LD32 / BCF

Regular interlacing and high interlacing density up to 4000 m/min

Count range [dtex] Denier in jet Typical range Limits of application LD32 LD32.01 LD32.02 LD32.03 LD32.04 LD32.05 LD32.06 LD32.07

Jet insert No. LE11.05 LE11.06 LE11.07 LE11.08 LE11.09 LE11.33 LE11.34

dtex (den = 0,9dtex)

400

600

1000 1500 2000 2500 3000 3500 5000 6000

Range of jet types for LD32 / technical filament yarns like CF, FDY, glass fibres etc.

*) 1 = single jet insert *) 2 = double jet insert *) 3 = triple jet insert *) 4 = quadruple jet insert *) 6 = sixtuple jet insert

Regular interlacing and high interlacing density up to 4000 m/min

Count range [dtex] Denier in jet Typical range Limits of application LD32 Jet insert No. LD32.Y23B LE11.Y23B LD32.15B LE11.61B LD32.16B LE11.62B LD32.Y30B LE11.Y30B LD32.01 LE11.05 LD32.02 LE11.06 LD32.03 LE11.07 LD32.04 LE11.08 LD32.05 LE11.09 LD32.06 LE11.33 LD32.07 LE11.34 dtex (den = 0,9dtex)

400

600

1000 1500 2000 2500 3000 3500 5000 6000 10000

Air consumption per yarn position

Easy change of yarn running direction by turning insert support and cover by 180 degrees. Includes quick change set for insert. *Point of reference T = 293°K = 20°C = 68°F DIN 1343

Subject to change without notice © 2011 Oerlikon Textile Components GmbH, Branch Hammelburg, Germany, LD32-FE-08-2011

LD32-FE.pdf  

Oerlikon Textile Components GmbH ⋅ Branch Hammelburg Fuldaer Str. 19 ⋅ 97762 Hammelburg, Germany T +49 97 32 87 0 ⋅ F +49 97 32 87 310 sales...

Read more
Read more
Similar to
Popular now
Just for you