Page 1

Air Migration Filament Spinning Heberlein® PolyJet-2 Migra Unique, flexible jet modules for spin-finish migration in the spinning process The proven MigraJet in a new design.The PolyJet-2 modular jet concept enables jets of different sizes to be exchanged on the same holder. This triggers a quick reaction to changing market trends. The PolyJet-2 Migra produces an uniform distribution of spin-finish in the yarn cross-section and along the yarn. For optimum yarn compaction and a stable running threadline at highest speeds. For all spinning processes for making multi-filament yarns from PET, PA and PP. Increases machine utilisation both in the spinning as well as in many following processes. Lower air consumption, since it works at low air pressures. Uncomplicated threading from the front. Already prepared for machines with automatic threading. Protection of the high grade ceramic plates by means of a special jet housing. Free selection of coloured jet holder for identification in the spinning line, which increases production security. Simplified service and cleaning. Very compact design for narrow threadline spacing. PolyJet-SP-2 Migra For all textile yarns up to 800 dtex in the jet. PolyJet-TG-2 Migra For all technical yarns up to 10‘000 dtex and BCF yarns up to max. 16‘000 dtex in the jet.

Our product range Air jets Aspirating, cutting and splicing units Bearings and rollers Friction discs Friction units Spindles Certified Quality ISO 9001-2000

Oerlikon Heberlein Temco Wattwil Inc. Bleikenstrasse 11 · 9630 Wattwil, Switzerland T +41 71 987 44 44 · F +41 71 987 44 45 www.components.oerlikontextile.com · info.heberlein@oerlikon.com


Air Migration Filament Spinning Heberlein® PolyJet-2 Migra Technical Data Type

Air Pressure pe Yarn count in the jet** [bar]* [dtex]

TG-2 SP-2

Flat yarns

* **

BCF yarns

Winding speed** [m/min] Air usage qvn per For Threadline number of spacing yarn channel 3 yarn ends [mm] Flat yarns BCF yarns [m /h]

M161/CN26

0,5 - 2,0

- 350

~7‘500

1,190 (pe+1)

1

16

M200/CN27

0,5 - 2,0

- 800

~7‘500

1,859 (pe+1)

1

16

M320/CN52

0,5 - 2,0

- 5‘500

- 8‘500 ~6‘500

~5‘000

4,759 (pe+1)

1

30

M400/CN62

0,5 - 2,0

- 10‘000

- 16‘000 ~6‘500

~5‘000

7,437 (pe+1)

1

30 3

According to standard DIN 1343: Temperature = 0° C; Pressure = 1,01325 bar; Relative Humidity = 0% (1 cubic meter = 1,293kg; psi = 14,7xbar; CFM = 0,588 x m /h) Values for guidance: depend on the feeder yarn properties, the machine settings and the thread guides (den = 0,9 x dtex)

Yarn Characteristics (in the water bath) PolyJet-2 Migra

Dimensions in mm

30

16

68

PolyJet-SP-2 Migra

PolyJet-TG-2 Migra

Compressed Air Requirements - Pressure fluctuations max. ± 0,1 bar - Temperature 25 °C ± 5 °C - Relative humidity < 40 % - Residual oil content < 0,1 ppm, ideally oil free (1 ppm ~ 1 mg/m3) - Chemically neutral - Free from abrasive particles, Eliminate particles > 1.0 μm 100 %

Subject to change without prior notice · © 2011 Oerlikon Heberlein Temco Wattwil AG, 9630 Wattwil, Switzerland 740451/02 This product is covered by property rights (patent, protected design). Further information see www.components.oerlikontextile.com

740451_02--E--PDB-PolyJet-2_Migra_HSR_compr.pdf  

PolyJet-TG-2 Migra For all technical yarns up to 10‘000 dtex and BCF yarns up to max. 16‘000 dtex in the jet. For all spinning processes for...

Read more
Read more
Similar to
Popular now
Just for you