Page 1

NORTHERN

POLYTUNNELS & HORTICULTURAL SUPPLIES

Issue 12


1

Placing Your Order

Carriage

PHONE: 01282 873120  Our telephones lines are operational from 8.30am to 5.00pm Mon-Fri (excluding English bank holidays).

For orders under £125.00 (+ VAT):  A cost of £8.33 (+VAT) will be charged to deliver orders to most of mainland UK. 

EMAIL: sales@npstructures.co.uk  For sales, and customer service enquiries.

If the order is under 2kg then a reduced £5 (plus VAT) postal charge will apply instead.

ONLINE: www.northernpolytunnels.co.uk 

A cost of £27.00 (+VAT) will be charged for deliveries to the Scottish Highlands. 

QUOTATIONS / SITE VISITS:  For most new polytunnel quotations and existing polytunnel refurbishments, where you require our contractors to undertake the construction or repair work, we can usually provide a quotation without the need for a site visit by using photographs. These can be emailed to sales@npstructures.co.uk. Our technical sales team travel the whole of the UK and Southern Ireland (and further afield when the opportunity arises). We endeavour to respond to all site visit requests in the soonest time-frame possible, however, when travelling to the furthermost reaches of the UK we try to tie-up several visits within a journey. Therefore please allow us as much notice as possible.

Placing Your Order All our prices are valid at the time of producing this brochure. We always endeavour to honour our published prices throughout the year but from time to time we are hit with unforeseeable increases from our suppliers that we simply can’t withstand.

Our standard next day service also applies to Scotland, although due to the remoteness of certain geographical locations this could take longer, especially where the final delivery is sub-contract ed to a third party carrier (dependent on postcode). Offshore shipping – For Scottish Islands (incl. Skye), N. Ireland, Southern Ireland, Channel Islands, Isle of Man etc., please call our sales office for a price. All orders over £125.00 (+ VAT):  Delivered FREE of charge to most mainland UK addresses on a next day delivery service (see additional notes below). A surcharge of £18.75 (+VAT) will be charged for deliveries to the Scottish Highlands. Large, bulky orders will be delivered by our wagons, so please allow 1-4 weeks (depending on timing of ordering)

Free UK Delivery

Therefore we reserve the right to alter our prices in-line with supplier increases without prior notice. For up to date prices visit www.northernpolytunnels.co.uk

£18.75 + VAT POA

VAT All prices in this brochure and on our trade website exclude VAT. 

Payment Card: In the interests of security, we only take card payments over the phone or via our website. We accept the following cards. 

Cheque: All cheques should be made payable to NP Structures Ltd. and posted to our main office address along with your contact details and/or quotation number. Account: Customers wishing to open a trade account can request an application form by calling 01282 873120, or by downloading one from our website. If in agreement with our terms & conditions, return your completed form to: Accounts Department at our main office address. Alternatively, scan and email accounts@npstructures. co.uk -  Subject to acceptance our terms are 30 days from date of invoice.

Important Note:  It is advisable to check your deliveries before signing for them, especially high value or fragile items. You are within your rights to detain the delivery driver for a ‘reasonable’ amount of time in order to make an inspection. Any items that are received damaged without being signed for as such will result in no claim being accepted by the freight company. Export:  Northern Polytunnels (& NP Structures Ltd.) export worldwide. We welcome any overseas business where payment is made via a direct bank transfer. If delivering to a UK address for you to make your own shipping arrangements then VAT will be charged and later refunded upon receipt of a valid overseas shipping document. 


2 Issue 12 January 2016

Retail Structures Polytunnels

5-8 9 - 34

Polytunnel Covers

35 - 42

Parts, Fittings and Sundries

43 - 54

Netting, Polythene and Fabrics

55 - 64

Pathways and Benching

65 - 68

Heating, Lighting, Ventilation and Climate

69 - 82

Irrigation and Water Storage

83 - 116

Livestock Housing

117-118

Leisure Structures

119 - 120

Temporary Structures

121-122

Garden Polytunnels

123 - 124

Index

125 - 126

Price Beat Guarantee At Northern Polytunnels we pride ourselves if supplying the highest quality products at extremely competitive prices. However, we are occasionally beaten on price, often with an inferior product.  So, if you like our products and would like to do business with our company then why not give us a chance to beat any other quotation you have.   If you have a lower quote for a comparable product – we’ll beat it!

PRICE BEAT GUARANTEE

All orders are subject to our terms and conditions of sale. Our terms and conditions can be viewed online at www.northernpolytunnels.co.uk/terms


3

Dear Customer, Welcome to our 2016 horticultural trade brochure. In addition to our traditional range of products we now have a fully dedicated department for irrigation, heating, ventilation, screening, general equipment and sundries. Firstly, I would like to thank you for your past business. Thankfully, we had a good 2015 season overall. We hope to build even further on this during 2016 by stocking a far greater range of products.

WELCOME

You will notice as you thumb through these pages that we are very competitively priced and have given you full visibility of this by publishing our prices where applicable. If you have any queries or are considering any future developments then please speak with our technical team. They can help you plan your polytunnel or garden centre development, irrigation system, specify a heater, size-up a replacement polytunnel cover, or advise you on any number of topics. I wish you a successful trading year and look forward to your continued support. Regards,

Nigel Carr Commercial Director


4

CE Marking and ISO9001

If you’re planning a new retail-building project, don’t get caught out by new legislation that came into force in 2014… CERTIFICATE OF CONFORMITY OF THE FACTORY PRODUCTION CONTROL Notified Body No. 1224 In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation or CPR), this certificate applies to the construction product

Welded Structural Steel Components intended for load bearing applications Execution Class

Up to EXC2

Declaration Method

Design Methods 1; 2; 3a and 3b

Welding Process(es)

135

Parent Metal(s)

S275R + AR S355J2 + N

Parent Metals Group(s) & Sub Group(s)

1.1; 1.2

Responsible Welding Co-ordinator

Mr Harry Hobman

produced by

NP Structures Ltd t/a Northern Polytunnels Mill Green Waterside Road Colne Lancashire BB8 0TA

and produced in the manufacturing plant NP Structures Ltd t/a Northern Polytunnels Mill Green, Waterside Road, Colne, Lancashire BB8 0TA This certificate attests that all provisions concerning the assessment and verification of constancy of performance described in Annex ZA of the standard

From 1st July 2014, the CE marking of steel works became a legal requirement for garden centre building manufacturers, and any building projects commissioned after that date could be compromised should you employ a retail framework manufacturer that is not CE accredited. Should you choose to use a non-accredited manufacturer who is subsequently reported, local Trading Standards departments will be able to suspend building work and potentially recall products used in the building. Trading Standards also have the power to insist that a building is taken down if it is found to be unsafe.

EN 1090-1:2009+A1:2011 under system 2+ are applied and that the factory production control fulfils all the prescribed requirements set out above. This certificate was first issued on 30 June 2014 and will remain valid until the date of expiry shown, provided that the test methods and/or factory production control requirements included in the harmonised standard, used to assess the performance of the declared characteristics, do not change, and the product, and the manufacturing conditions in the plant are not modified significantly.

Certificate number:

Kevin Towler Director

Date of initial BM TRADA Certification: 30 June 2014 Date of last issue:

BM TRADA Certification Ltd, Chiltern House, Stocking Lane, High Wycombe, Buckinghamshire, HP14 4ND, UK

30 June 2014

This certificate remains the property of BM TRADA Certification Ltd. This certificate and all copies or reproductions of the certificate shall be returned to BM TRADA Certification Ltd or destroyed if requested. Further clarification regarding the scope of this certificate and verification of the certificate is available through BM TRADA at the above address or at www.bmtrada.com

Certificate expiry date: 29 June 2017

Trading Standards will be following up those manufacturers who carry out work illegally. The majority of manufacturers in the UK have currently achieved or are working towards achieving CE accreditation. With this level of cover age it means we do expect manufacturers with CE marking to report those that don’t. After all, those operating without CE marking are breaking the law, and could potentially damage the reputation of the whole industry. ISO9001:2008 It is a requirement of CE Marking, that the company has a quality management system (QMS) in place. Although it is not essential that the QMS be a formal certified system, NP Structures decided to have our system certified to ISO9001:2008 ISO 9001:2008 is the international standard for quality management systems and is the only standard that can be certified to. This standard is based on a number of quality management principles including a strong customer focus, the motivation and implication of top management, the process approach and continual improvement. A quality company this confirms NP Structures’ firm commitment to ensuring that our products not only meet international quality standards, but that they are certified to be safe for their intended purpose and comply with all relevant legislation.

CE MARKING AND ISO9001

1224-CPR-0560

There is also uncertainty as to whether a non-CE marked building is actually insured if constructed after the date the legislation came into force, a very real issue if a building collapses due to snow loading, for example. The many leading insurance companies have not yet committed to a position on this and garden centres are being advised to check with their individual insurers.


5

Garden Centre Canopies

Visit... www.npstructures.co.uk We are the designer, the architect, the manufacturer and the constructor...

Booths Garden Centre

Over the years we have become one of the leading suppliers of retail structures. We have a proven track record and are a highly respected and established company. We are actively involved in all aspects of pre-construction, post-construction and everything else in-between. Our project and sales team will manage all aspects of your project, ensuring eve rything runs smoothly, within budget and meets deadlines. We specialise in the design, planning and construction solutions for retail buildings including garden centre buildings, retail canopies, covered walkways and bespoke structures. Design Software We have recently invested in cutting edge IT equipment and the latest in 3D rendering software. This software enables our design team to work with our customers in a digital environment and deliver high resolution 3D imagery, which will help you envisage the structures and ensure prac tical and cost effective projects that are concise and easy to understand.

RETAIL STRUCTURES

Manufacturing

Next Home and Garden

Our fabrication and warehouse facility covers over 2500m². Our team in cludes skilled fabricators and welders all specialising in MIG and Arc welding. We invest heavily in our manufacturing processes, using the latest in CNC rolling and plasma cutting technologies. Only the highest quality raw materials are used. We will not com promise quality with cheaper suppliers. Our transport and delivery department includes a fleet of articulated, 7.5 tonne and 3.5 tonne vehicles to ensure timely deliveries. Construction

Ball Colegrave

For our construction team, we have brought together talented and experi enced experts. They’ve been involved with a number of technical projects. Each team is led by a construction manager, who will ensure quality control and time manage your project. We sometimes use carefully selected pro fessional subcontractors to work alongside our team on bigger projects; this helps get the task done quickly and efficiently.


6

Cascade Water Gardens

Kemps Garden Centre

Newbank Garden Centre

Pontarddulais Garden Centre

Foxlane Garden Centre

RETAIL STRUCTURES

Buckingham Garden Centre


7

Traditional Canopies and Walkways

Based on the traditional multi-span structure, traditional canopies incorporate wide gutters on support posts fitted to both sides of the framework. Two standard widths are available, 6.4m (21ft) and 8m (26ft)

RETAIL STRUCTURES

Our unique Alitrap polythene fixing system allows the main cover to be fastened to the end hoops. A separate piece of polythene is used to clad the end ‘D’ panels leaving a neat, flat finish.


8

Aluminium lintels (no timber is used on this structure) Available in any length Gutters to both sides as standard Clad with white polythene (other options available)

Ideal for covered work areas, loading bays, dry storage etc. All structures are Z35 and heavy gauge steel hot dip galvanized to BS EN ISO 1461:2009

PLEASE NOTE: Traditional canopies do NOT comply to building regulations. BAY WIDTH

LINTEL AND GUTTER HEIGHT

OVERALL HEIGHT

STANDARD HOOP SPACINGS

DIAGONAL BRACINGS PER END

HOOP DIAMETER

BRACINGS DIAMETER

26ft 6’ (8m)

2.2m (7’2”)

3.96m (13’)

2.44m (8’)

7

60mm (2 1/2”)

50mm (2”)

21ft 6’ (6.5m)

2.2m (7’2”)

3.66m (12’)

2.44m (8’)

7

50mm (2”)

50mm (2”)

RETAIL STRUCTURES

Easy to install – minimum disruption


9

Domestic Range

Although commercial greenhouses and garden centre structures form our core business, we also manufacture a large range of garden polytunnels and associated products which are aimed at the hobby gardener. These can be viewed (with prices) in our dedicated ‘Hobby Gardening’ brochure and also through our website. Polytunnels NEW Easy-Build

Fruit Cages

The Easy-Build polytunnel from Northern Polytunnels is by far the quickest and easiest polytunnel to build. Simplicity and ease has been the driv ing force behind the NEW Easy-Build design. In a nutshell, we wanted to de sign the strongest polytunnel, at the best possible price, which could be built in a fraction of the time and without any specialist tools. See pages 123-124 for more info. Fruit Cages

Arches & Walkways

Whether you have a large allotment or just a few planters, growing your own fruit is satisfying as well as healthy. Northern Polytunnels’ fruit cages are designed and developed in our workshop  to accommodate the varying sizes of fruit beds. For greater convenience our fruit cages can be bought by piece or as a standard sized kits, accommodating any requirements.

POLYTUNNELS

Raised Beds & Hoop Kits

Raised Beds & Hoop Kits

We designed our raised beds specifically for both garden and allotment growers. The advantage of using a raised bed is that any area of land can be turned into a fertile growing environment. By using our unique corner and side bracket system, you can stack raised beds on top of each other, creating a raised bed as tall as you like. By combining a hoop kit with your raised bed you can create a mini polytunnel at the fraction of the cost of a full polytunnel. The hoop kit is designed to protect and shield your plants from the extreme elements. See our website for much, tmuch more or request a brochure.

If you would like a copy of our hobby brochure... Call: 01282 873120 Email: sales@npstructures.co.uk Download: www.northernpolytunnels.co.uk Polytunnels Easy-Build Please Note: All prices exclude VAT


10

Commercial Polytunnel Ranges... At A Glance Single Span Polytunnels 14ft (4.27m) Wide Single Span Polytunnel

Page 11

WIDTH

DOOR LINTEL HEIGHT

MAX. DOOR OPENING WIDTH

OVERALL HEIGHT

HEIGHT OF STRAIGHT SIDE

STANDARD HOOP SPACINGS

DIAGONAL BRACINGS PER END

HOOP DIAMETER

BRACINGS DIAMETER

4.27m (14ft)

2m (6’6”)

1.83m (6ft)

2.3m (7’6”)

0.92m (3ft)

1.52m or 1.83m (5ft or 6ft)

1.22m (4ft)

50mm

32mm

18ft (5.5m) Wide Single Span Polytunnel

Page 12

WIDTH

DOOR LINTEL HEIGHT

MAX. DOOR OPENING WIDTH

OVERALL HEIGHT

HEIGHT OF STRAIGHT SIDE

STANDARD HOOP SPACINGS

DIAGONAL BRACINGS PER END

HOOP DIAMETER

BRACINGS DIAMETER

18ft (5.5m)

2.17m (7’1”)

3.5m (11’6”)

2.97m (9’9”)

1.17m (3’10”)

2.44m (8’)

5

50mm

50mm

21ft (6.4m) Wide Single Span Polytunnel

Page 13

WIDTH

DOOR LINTEL HEIGHT

MAX. DOOR OPENING WIDTH

OVERALL HEIGHT

HEIGHT OF STRAIGHT SIDE

STANDARD HOOP SPACINGS

DIAGONAL BRACINGS PER END

HOOP DIAMETER

BRACINGS DIAMETER

21ft (6.4m)

2.17m (7’1”)

4.27m (14’)

3.05m (10’)

1.17m (3’10”)

2.44m (8’)

5

50mm

50mm

21ft (6.4m) Wide High Sided Single Span Polytunnel

Page 14

WIDTH

DOOR LINTEL HEIGHT

MAX. DOOR OPENING WIDTH

OVERALL HEIGHT

HEIGHT OF STRAIGHT SIDE

STANDARD HOOP SPACINGS

DIAGONAL BRACINGS PER END

HOOP DIAMETER

BRACINGS DIAMETER

21ft (6.4m)

2.2m (7’2”)

4.9m (16’)

3.66m (12’)

1.83m (6’)

2.44m (8’)

7

50mm

50mm

24ft (7.3m) Wide Single Span Polytunnel

Page 15

WIDTH

DOOR LINTEL HEIGHT

MAX. DOOR OPENING WIDTH

OVERALL HEIGHT

HEIGHT OF STRAIGHT SIDE

STANDARD HOOP SPACINGS

DIAGONAL BRACINGS PER END

HOOP DIAMETER

BRACINGS DIAMETER

24ft (7.3m)

2.17m (7’1”)

5.48m (18’)

3.20m (10’6”)

1.22m (4’)

2.13m (7’)

5

60mm

50mm

26ft (8m) Wide High Sided Single Span Polytunnel

Page 16

WIDTH

DOOR LINTEL HEIGHT

MAX. DOOR OPENING WIDTH

OVERALL HEIGHT

HEIGHT OF STRAIGHT SIDE

STANDARD HOOP SPACINGS

DIAGONAL BRACINGS PER END

HOOP DIAMETER

BRACINGS DIAMETER

26ft (8m)

2.2m (7’2”)

6.4m (21’)

3.96m (13’)

1.83m (6’)

2.44m (8’)

7

60mm

50mm

27ft (8.2m) Wide Single Span Polytunnel

Page 17

WIDTH

DOOR LINTEL HEIGHT

MAX. DOOR OPENING WIDTH

OVERALL HEIGHT

HEIGHT OF STRAIGHT SIDE

STANDARD HOOP SPACINGS

DIAGONAL BRACINGS PER END

HOOP DIAMETER

BRACINGS DIAMETER

27ft (8.2m)

2.17m (7’1”)

6.4m (21’)

3.28m (10’9”)

1.22m (4’)

2.13m (7’)

7

60mm

50mm

30ft (9.1m) Wide Single Span Polytunnel

Page 18

DOOR LINTEL HEIGHT

MAX. DOOR OPENING WIDTH

OVERALL HEIGHT

HEIGHT OF STRAIGHT SIDE

STANDARD HOOP SPACINGS

DIAGONAL BRACINGS PER END

HOOP DIAMETER

BRACINGS DIAMETER

30ft (9.1m)

2.17m (7’1”)

7.31m (24’)

3.66m (12’)

1.22m (4’)

1.83m (6’)

8

60mm

50mm

Multi-Span Polytunnels 21ft 6in (6.4m) Wide Multi-Span Polytunnel

Page 19

WIDTH

DOOR LINTEL HEIGHT

MAX. DOOR OPENING WIDTH

OVERALL HEIGHT

HEIGHT OF STRAIGHT SIDE

STANDARD HOOP SPACINGS

DIAGONAL BRACINGS PER END

HOOP DIAMETER

BRACINGS DIAMETER

21ft 6’ (6.m)

2.2m (7’2”)

4.9m (16’)

3.66m (12’)

1.83m (6’)

2.44m (8’)

7

50mm

50mm

26ft 6in (8m) Wide Multi-Span Polytunnel

Page 20

WIDTH

DOOR LINTEL HEIGHT

MAX. DOOR OPENING WIDTH

OVERALL HEIGHT

HEIGHT OF STRAIGHT SIDE

STANDARD HOOP SPACINGS

DIAGONAL BRACINGS PER END

HOOP DIAMETER

BRACINGS DIAMETER

26ft 6’ (8m)

2.2m (7’2”)

6.4m (21’)

3.96m (13’)

1.83m (6’)

2.44m (8’)

7

60mm

50mm

POLYTUNNELS

WIDTH


11

Scan QR code to configure online

14ft (4.27m) WIDE SINGLE SPAN POLYTUNNEL For a quotation please call 01282 873120, email sales@npstructures.co.uk. or configue online at www.northernpolytunnels.co.uk WIDTH

DOOR LINTEL HEIGHT

OVERALL HEIGHT

HEIGHT OF STRAIGHT SIDE

STANDARD HOOP SPACINGS

HOOP DIAMETER

BRACINGS DIAMETER

4.27m (14ft)

2m (6’6”)

2.3m (7’6”)

0.92m (3ft)

1.52m or 1.83m (5ft or 6ft)

50mm

32mm

Steel:  All steel tubes are galvanised both inside and outside for longer life (to Z35 standard) with a 1.5mm wall thickness. Hoops:  Two-piece, 50mm diam. steel hoops spaced at 5ft or 8ft apart. Our 0.92m (3ft) straight sides allow a 1.83m (6ft) working height within 45cm (18”) of each side.

POLYTUNNELS

Ground Tubes:  Thick walled (3.25mm), heavy gauge, galvanised founda tion tubes give longer life and provide a secure structure. Cross Bracing Bars (Crop Bars):   Optional 32mm tubular steel bracing bars (crop bars), supported from the ridge tube by two 32mm tubular steel hangers. Cross bracing bars, not only add strength to the structure but are also used for suspending irrigation spray lines, tying up crops such as toma toes and vines, and for suspending hanging baskets see page 53.  Base Rails, Side Rails and End Frames:  Tanalised 100mm x 50mm (4”x 2”) timber base and side rails. Tanalised 75mm x 75mm (3”x 3”) timber end frames. Aluminium options available see pages 27-28.

Polythene: Our standard cladding is 720g (180µm) ‘Visqueen’ anti- drip polythene, with either a clear or diffused option.  We also offer a 600g (150mu) 50:50 option, which only has half the normal level of diffusion, making it 50% clear and 50% diffused.  See pages 35-38 for more details.   Our polytunnel design allows the polythene to be  re-tensioned after fitting to get a drum-skin tight cover. Anti-Hotspot Tape: Padded foam tape which acts as insulation between the metal and the polythene, to prevent the build-up of heat in the steel frame being transferred to the polythene. Extends the life of the polythene sheet by at least one year. Doors: Single or double sliding aluminium doors incorpo rating our Ali-trap polythene fixing system. One-piece, aluminium door track and pelmet (combined) for smooth, trouble free operation see page 25. Ventilation: Optional side netting with internal roll-down poly thene screen. Also available, louvres, roof vents and au tomatic ventilation systems see pages 23-26. Construction service available by quotation.

Please Note: All prices exclude VAT


12

Scan QR code to configure online

18ft (5.5m) WIDE SINGLE SPAN POLYTUNNEL For a quotation please call 01282 873120, email sales@npstructures.co.uk. or configue online at www.northernpolytunnels.co.uk WIDTH

DOOR LINTEL HEIGHT

MAX. DOOR OPENING WIDTH

OVERALL HEIGHT

HEIGHT OF STRAIGHT SIDE

STANDARD HOOP SPACINGS

DIAGONAL BRACINGS PER END

HOOP DIAMETER

BRACINGS DIAMETER

5.5m (18ft)

2.17m (7’1”)

3.5m (11’6”)

2.97m (9’9”)

1.17m (3’10”)

2.44m (8’)

5

50mm

50mm

Steel: All steel tubes are galvanised both inside and outside for longer life (to Z35 standard) with a 1.5mm wall thickness. Hoops: Two-piece, 50mm steel hoops spaced at 8ft apart (closer spacings can be catered for). Our 1.17m (3’10”) straight sides allow a 1.83m (6ft) working height within 45cm (18”) of each side. Ground Tubes: Thick walled (3.25mm), heavy gauge, galvanised founda tion tubes give longer life and provide a secure structure.

Base Rails, Side Rails and End Frames:  Tanalised 100mm x 50mm (4”x 2”) timber base and side rails. Tanalised 75mm x 75mm (3”x 3”) timber end frames. Aluminium options available see pages 27-28

Anti-Hotspot Tape: Padded foam tape which acts as insulation between the metal and the polythene, to prevent the build-up of heat in the steel frame being transferred to the polythene. Extends the life of the polythene sheet by at least one year. Doors: Single or double sliding aluminium doors incorpo rating our Ali-trap polythene fixing system. One-piece, aluminium door track and pelmet (combined) for smooth, trouble free operation see page 25. Ventilation: Optional side netting with internal roll-down polythene screen. Also available, louvres, roof vents and automatic ventilation systems see pages 23-26. Construction service available by quotation.

Price Promise – If you get a cheaper quote elsewhere, we’ll beat it (based on a like for like basis).

POLYTUNNELS

Cross Bracing Bars (Crop Bars):  Optional 50mm tubular steel bracing bars (crop bars), supported from the ridge tube by two 32mm tubular steel hangers. Cross bracing bars, not only add strength to the structure but are also used for suspending irriga tion spray lines, tying up crops such as tomatoes and vines, and for suspending hanging baskets see page 53.

Polythene: Our standard cladding is 720g (180µm) ‘Visqueen’ anti- drip polythene, with either a clear or diffused option.  We also offer a 600g (150µm) 50:50 option, which only has half the normal level of diffusion, making it 50% clear and 50% diffused. See pages 35-38 for more details.   Our polytunnel design allows the polythene to be  re-tensioned after fitting to get a drum-skin tight cover


13

Scan QR code to configure online

21ft (6.4m) WIDE SINGLE SPAN POLYTUNNEL For a quotation please Call: 01282 873120, Email: sales@npstructures.co.uk. or configure online at www.northernpolytunnels.co.uk WIDTH

DOOR LINTEL HEIGHT

MAX. DOOR OPENING WIDTH

OVERALL HEIGHT

HEIGHT OF STRAIGHT SIDE

STANDARD HOOP SPACINGS

DIAGONAL BRACINGS PER END

HOOP DIAMETER

BRACINGS DIAMETER

6.4m (21ft)

2.17m (7’1”)

4.27m (14’)

3.05m (10’)

1.17m (3’10”)

2.44m (8’)

5

50mm

50mm

Steel:  All steel tubes are galvanised both inside and outside for longer life (to Z35 stanard with a 1.5mm wall thickness. Hoops:  Two-piece, 50mm steel hoops spaced at 8ft apart (closer spacings can be catered for). Our 1.17m (3’10”) straight sides allow a 1.83m (6ft) working height within 45cm (18”) of each side.

POLYTUNNELS

Ground Tubes:  Thick walled (3.25mm), heavy gauge, galvanised founda tion tubes give longer life and provide a secure structure. Cross Bracing Bars (Crop Bars):  Optional 50mm tubular steel bracing bars (crop bars), supported from the ridge tube by two 32mm tubular steel hangers. Cross bracing bars, not only add strength to the structure but are also used for suspending irrigation spray lines, tying up crops such as tomatoes and vines, and for suspending hanging baskets see page 53.  Base Rails, Side Rails and End Frames:  Tanalised 100mm x 50mm (4”x 2”) timber base and side rails. Tanalised 75mm x 75mm (3”x 3”) timber end frames. Aluminium option available see pages 27-28.

Polythene:  Our standard cladding is 720g (180µm) ‘Visqueen’ anti-drip polythene, with either a clear or diffused option.  We also offer a 600g (150µm) 50:50 option, which only has half the normal level of diffusion, making it 50% clear and 50% diffused.  See pages 35-38 for more details.  Our polytunnel design allows the polythene to be  re-tensioned after fitting to get a drum-skin tight cover. Anti-Hotspot Tape:  Padded foam tape which acts as insulation between the metal and the polythene, to prevent the build-up of heat in the steel frame being transferred to the polythene. Extends the life of the polythene sheet by at least one year. Doors:  Single or double sliding aluminium doors incorporating our Ali-trap polythene fixing system. One-piece, aluminium door track and pelmet (combined) for smooth, trouble free operation. See page 25.  Ventilation:  Optional side netting with internal roll-down polythene screen. Also available, louvres, roof vents and automatic ventilation systems see pages 23-26. Construction service available by quotation.

Please Note: All prices exclude VAT


14

21ft (6.4m) WIDE, HIGH SIDED POLYTUNNEL For a quotation please Call: 01282 873120, Email: sales@npstructures.co.uk. or configure online at www.northernpolytunnels.co.uk BAY WIDTH

DOOR LINTEL AND GUTTER HEIGHT

MAX. DOOR OPENING WIDTH

OVERALL HEIGHT

HEIGHT OF STRAIGHT SIDE

STANDARD HOOP SPACINGS

DIAGONAL BRACINGS PER END

HOOP DIAMETER

BRACINGS DIAMETER

21ft (6.4m)

2.2m (7’2”)

4.9m (16’)

3.66m (12’)

1.83m (6’)

2.44m (8’)

7

50mm

50mm

Steel: All steel tubes are galvanised both inside and outside for longer life (to Z35 standard) with a 1.5mm wall thick ness. Hoops: Two-piece, 50mm steel hoops spaced at 8ft apart (clos er spacings can be catered for). 1.83m (6’)straight sides allows a full working height right up to the inside edge of the structure. Ground Tubes: Thick walled (3.25mm), heavy gauge, galvanised foun dation tubes give longer life and provide a secure structure.

Base Rails, Side Rails and End Frames: Tanalised 100mm x 50mm (4”x 2”) timber base and side rails. Tanalised 75mm x 75mm (3”x 3”) timber end frames. Aluminium option available see pages 27-28.

Anti-Hotspot Tape: Padded foam tape which acts as insulation between the metal and the polythene, to prevent the build-up of heat in the steel frame being transferred to the polythene. Extends the life of the polythene sheet by at least one year. Doors: Single or double sliding aluminium doors incorporating our Ali-trap polythene fixing system. One-piece, aluminium door track and pelmet (combined) for smooth, trouble free operation see page 25. Ventilation: Optional side netting with internal roll-down polythene screen. Also available, louvres, roof vents and automatic ventilation systems see pages 23-26. Gutters: Available with or without gutters Construction available by quotation.

Price Promise – If you get a cheaper quote elsewhere, we’ll beat it (based on a like for like basis).

POLYTUNNELS

Cross Bracing Bars (Crop Bars): Optional 50mm tubular steel bracing bars (crop bars), supported from the ridge tube by two 32mm tubular steel hangers. Cross bracing bars, not only add strength to the structure but are also used for suspendingirrigation spray lines, tying up crops such as tomatoes and vines, and for suspending hanging baskets see page 53.

Polythene: Our standard cladding is 720g (180µm) ‘Visqueen’ anti-drip polythene, with either a clear or diffused option.  We also offer a 600g (150mu) 50:50 option, which only has half the normal level of diffusion, making it 50% clear and 50% diffused.  See pages 35-38 for more details. Our polytunnel design allows the polythene to be  re-tensioned after fitting to get a drum-skin tight cover.


15

Scan QR code to configure online

24ft (7.3m) WIDE SINGLE SPAN POLYTUNNEL For a quotation please Call: 01282 873120, Email: sales@npstructures.co.uk. or configure online at www.northernpolytunnels.co.uk WIDTH

DOOR LINTEL HEIGHT

MAX. DOOR OPENING WIDTH

OVERALL HEIGHT

HEIGHT OF STRAIGHT SIDE

STANDARD HOOP SPACINGS

DIAGONAL BRACINGS PER END

HOOP DIAMETER

BRACINGS DIAMETER

7.3m (24ft)

2.17m (7’1”)

5.48m (18’)

3.20m (10’6”)

1.22m (4’)

2.13m (7’)

5

60mm

50mm

Steel:  All steel tubes are galvanised both inside and outside for longer life (to Z35 standard) with a 1.5mm wall thickness. Hoops: Two-piece, 60mm steel hoops spaced at 7ft apart (closer spac ings can be catered for). Our 1.22m (4ft) straight sides allow a 1.83m (6ft) working height within 45cm (18”) of each side.

POLYTUNNELS

Ground Tubes: Thick walled (3.25mm), heavy gauge, galvanised founda tion tubes give longer life and provide a secure structure. Cross Bracing Bars (Crop Bars):  Optional 50mm tubular steel bracing bars (crop bars), supported from the ridge tube by two 32mm tubular steel hangers. Cross bracing bars, not only add strength to the structure but are also used for suspending irriga tion spray lines, tying up crops such as tomatoes and vines, and for suspending hanging baskets see page 53. Base Rails, Side Rails and End Frames: Tanalised 100mm x 50mm (4”x 2”) timber base and side rails.Tanalised 75mm x 75mm (3”x 3”) timber end frames. Aluminium option available see pages 27-28.

Polythene: Our standard cladding is 720g (180µm) ‘Visqueen’ anti-drip polythene, with either a clear or diffused option.  We also offer a 600g (150mu) 50:50 option, which only has half the normal level of diffusion, making it 50% clear and 50% diffused. See pages 35-38 for more details. Our polytunnel design allows the polythene to be  re-tensioned after fitting to get a drum-skin tight cover. Anti-Hotspot Tape: Padded foam tape which acts as insulation between the metal and the polythene, to prevent the build-up of heat in the steel frame being transferred to the polythene. Extends the life of the polythene sheet by at least one year. Doors: Single or double sliding aluminium doors incorporating our Ali-trap polythene fixing system. One-piece, aluminium door track and pelmet (combined) for smooth, trouble free operation see page 25. Ventilation: Optional side netting with internal roll-down polythene screen. Also available, louvres, roof vents and automatic ventilation systems see pages 23-26. Construction service available by quotation.

Please Note: All prices exclude VAT


16

26ft (8m) WIDE, HIGH SIDED POLYTUNNEL For a quotation please Call: 01282 873120, Email: sales@npstructures.co.uk. or configure online at www.northernpolytunnels.co.uk BAY WIDTH

DOOR LINTEL AND GUTTER HEIGHT

MAX. DOOR OPENING WIDTH

OVERALL HEIGHT

HEIGHT OF STRAIGHT SIDE

STANDARD HOOP SPACINGS

DIAGONAL BRACINGS PER END

HOOP DIAMETER

BRACINGS DIAMETER

26ft (8m)

2.2m (7’2”)

6.4m (21’)

3.96m (13’)

1.83m (6’)

2.44m (8’)

7

60mm

50mm

Steel: All steel tubes are galvanised both inside and outside for longer life (to Z35 standard) with a 1.5mm wall thick ness. Hoops: Two-piece, 60mm steel hoops spaced at 8ft apart (clos er spacings can be catered for). 1.83m (6’)straight sides allows a full working height right up to the inside edge of the structure. Ground Tubes: Thick walled (3.25mm), heavy gauge, galvanised foun dation tubes give longer life and provide a secure structure.

Base Rails, Side Rails and End Frames: Tanalised 100mm x 50mm (4”x 2”) timber base and side rails. Tanalised 75mm x 75mm (3”x 3”) timber end frames. Aluminium option available see pages 27-28.

Anti-Hotspot Tape: Padded foam tape which acts as insulation between the metal and the polythene, to prevent the build-up of heat in the steel frame being transferred to the polythene. Ex tends the life of the polythene sheet by at least one year. Doors: Single or double sliding aluminium doors incorporating our Ali-trap polythene fixing system. One-piece, alumini um door track and pelmet (combined) for smooth, trouble free operation see page 25. Ventilation: Optional side netting with internal roll-down polythene screen. Also available, louvres, roof vents and automatic ventilation systems see pages 23-26. Gutters: Available with or without gutters

Construction available by quotation. Price Promise – If you get a cheaper quote elsewhere, we’ll beat it (based on a like for like basis).

POLYTUNNELS

Cross Bracing Bars (Crop Bars): Optional 50mm tubular steel bracing bars (crop bars), supported from the ridge tube by two 32mm tubular steel hangers. Cross bracing bars, not only add strength to the structure but are also used for suspendingirrigation spray lines, tying up crops such as tomatoes and vines, and for suspending hanging baskets see page 53.

Polythene: Our standard cladding is 720g (180µm) ‘Visqueen’ anti- drip polythene, with either a clear or diffused option.  We also offer a 600g (150mu) 50:50 option, which only has half the normal level of diffusion, making it 50% clear and 50% diffused.  See pages 35-38 for more details. Our polytunnel design allows the polythene to be  re-tensioned after fitting to get a drum-skin tight cover.


17

Scan QR code to configure online

27ft (8.2m) WIDE SINGLE SPAN POLYTUNNEL For a quotation please Call: 01282 873120, Email: sales@npstructures.co.uk. or configure online at www.northernpolytunnels.co.uk WIDTH

DOOR LINTEL HEIGHT

MAX. DOOR OPENING WIDTH

OVERALL HEIGHT

HEIGHT OF STRAIGHT SIDE

STANDARD HOOP SPACINGS

DIAGONAL BRACINGS PER END

HOOP DIAMETER

BRACINGS DIAMETER

8.2m (27ft)

2.17m (7’1”)

6.4m (21’)

3.28m (10’9”)

1.22m (4’)

2.13m (7’)

7

60mm

50mm

Steel: All steel tubes are galvanised both inside and outside for longer life (to Z35 standard) with a 1.5mm wall thick ness.

POLYTUNNELS

Hoops: Two-piece, 60mm steel hoops spaced at 7ft apart (clos er spacings can be catered for). Our 1.22m (4ft) straight sides allow a 1.83m (6ft) working height within 45cm (18”) of each side.

Polythene: Our standard cladding is 720g (180µm) ‘Visqueen’ anti-drip polythene, with either a clear or diffused option.  We also offer a 600g (150µm) 50:50 option, which only has half the normal level of diffusion, making it 50% clear and 50% diffused. See pages 35-38 for more details.   Our polytunnel design allows the polythene to be  re-tensioned after fitting to get a drum-skin tight cover.

Ground Tubes; Thick walled (3.25mm), heavy gauge, galvanised foun dation tubes give longer life and provide a secure structure.

Anti-Hotspot Tape: Padded foam tape which acts as insulation between the metal and the polythene, to prevent the build-up of heat in the steel frame being transferred to the polythene. Extends the life of the polythene sheet by at least one year.

Cross Bracing Bars (Crop Bars): Optional 50mm tubular steel bracing bars (crop bars), supported from the ridge tube by two 32mm tubular steel hangers. Cross bracing bars, not only add strength to the structure but are also used for suspendingirrigation spray lines, tying up crops such as tomatoes and vines, and for suspending hanging baskets see page 53.

Doors: Single or double sliding aluminium doors incorporating our Ali-trap polythene fixing system. One-piece, aluminium door track and pelmet (combined) for smooth, trouble free operation see page 25.

Base Rails, Side Rails and End Frames: Tanalised 100mm x 50mm (4”x 2”) timber base and side rails. Tanalised 75mm x 75mm (3”x 3”) timber end frames. Aluminium option available see pages 27-28.

Ventilation: Optional side netting with internal roll-down polythene screen. Also available, louvres, roof vents and automatic ventilation systems see pages 23-26. Construction service available by quotation.

Please Note: All prices exclude VAT


18

Scan QR code to configure online

30ft (9.1m) WIDE SINGLE SPAN POLYTUNNEL For a quotation please Call: 01282 873120, Email: sales@npstructures.co.uk. or configure online at www.northernpolytunnels.co.uk WIDTH

DOOR LINTEL HEIGHT

MAX. DOOR OPENING WIDTH

OVERALL HEIGHT

HEIGHT OF STRAIGHT SIDE

STANDARD HOOP SPACINGS

DIAGONAL BRACINGS PER END

HOOP DIAMETER

BRACINGS DIAMETER

9.1m (30ft)

2.17m (7’1”)

7.31m (24’)

3.66m (12’)

1.22m (4’)

1.83m (6’)

8

60mm

50mm

Steel: All steel tubes are galvanised both inside and outside for longer life (to Z35 standard) with a 1.5mm wall thick ness. Hoops: Two-piece, 60mm steel hoops spaced at 6ft apart (clos er spacings can be catered for). Our 1.22m (4’) straight sides allow a 1.83m (6ft) working height within 45cm (18”) of each side.

Polythene: Our standard cladding is 720g (180µm) ‘Visqueen’ anti- drip polythene, with either a clear or diffused option.  We also offer a 600g (150µm) 50:50 option, which only has half the normal level of diffusion, making it 50% clear and 50% diffused. See pages 35-38 for more details.   Our polytunnel design allows the polythene to be  re-tensioned after fitting to get a drum-skin tight cover. Anti-Hotspot Tape; Padded foam tape which acts as insulation between the metal and the polythene, to prevent the build-up of heat in the steel frame being transferred to the polythene. Extends the life of the polythene sheet by at least one year.

Cross Bracing Bars (Crop Bars): Optional 50mm tubular steel bracing bars (crop bars), supported from the ridge tube by two 32mm tubular steel hangers. Cross bracing bars, not only add strength to the structure but are also used for suspending irrigation spray lines, tying up crops such as tomatoes and vines, and for suspending hanging baskets see page 53.

Doors: Single or double sliding aluminium doors incorporating our Ali-trap polythene fixing system. One-piece, aluminium door track and pelmet (combined) for smooth, trouble free operationsee page 25.

Base Rails, Side Rails and End Frames: Tanalised 100mm x 50mm (4”x 2”) timber base and side rails. Tanalised 75mm x 75mm (3”x 3”) timber end frames. Aluminium option available see pages 27-28.

Ventilation: Optional side netting with internal roll-down polythene screen. Also available, louvres, roof vents and automatic ventilation systems see pages 23-26. Construction service available by quotation.

Price Promise – If you get a cheaper quote elsewhere, we’ll beat it (based on a like for like basis).

POLYTUNNELS

Ground Tubes: Thick walled (3.25mm), heavy gauge, galvanised foun dation tubes give longer life and provide a secure structure.


19

21ft 6in (6.5m) WIDE MULTI-SPAN POLYTUNNEL For a quotation please Call: 01282 873120, Email: sales@npstructures.co.uk. or configure online at www.northernpolytunnels.co.uk

Multi-span polytunnels make the best use of your available space as there are no redundant areas between each bay. Typically around 20% higher at the apex, but due to the extra height being in the ‘leg’ they have approximately 25%30% more volume, providing a more harmonised environment which is less susceptible to sudden temperature rises. Irrigation with overhead spray-lines allows overlapping from bay to bay which increases the distribution uniformity. BAY WIDTH

DOOR LINTEL AND GUTTER HEIGHT

MAX. DOOR OPENING WIDTH

OVERALL HEIGHT

HEIGHT OF STRAIGHT SIDE

STANDARD HOOP SPACINGS

DIAGONAL BRACINGS PER END

HOOP DIAMETER

BRACINGS DIAMETER

21ft 6’ (6.5m)

2.2m (7’2”)

4.9m (16’)

3.66m (12’)

1.83m (6’)

2.44m (8’)

7

50mm (2”)

50mm (2”)

Steel: All steel tubes are galvanised both inside and outside for longer life (to Z35 standard) with a 1.5mm wall thickness. Hoops: Two-piece, 50mm steel hoops spaced at 8ft apart (closer spacings can be catered for). 1.83m (6’) straight sides allows a full working height right up to the inside edge of the structure.

POLYTUNNELS

Ground Tubes: Thick walled (3.25mm), heavy gauge, galvanised foundation tubes give longer life and provide a secure structure. Cross Bracing Bars (Crop Bars): Optional 50mm tubular steel bracing bars (crop bars), supported from the ridge tube by two 32mm tubular steel hangers. Cross bracing bars, not only add strength to the structure but are also used for suspending irrigation spray lines, tying up crops such as tomatoes and vines, and for suspending hanging baskets see page 53.

Polythene: Our standard cladding is 720g (180µm) ‘Visqueen’ anti-drip polythene, with either a clear or diffused option. We also offer a 600g (150µm) 50:50 option, which only has half the normal level of diffusion, making it 50% clear and 50% diffused. See pages 35-38 for more details.   Our polytunnel design allows the polythene to be  re-tensioned after fitting to get a drum-skin tight cover. Anti-Hotspot Tape: Padded foam tape which acts as insulation between the metal and the polythene, to prevent the build-up of heat in the steel frame being transferred to the polythene. Extends the life of the polythene sheet by at least one year. Doors: Single or double sliding aluminium doors incorporating our Ali-trap polythene fixing system. One-piece, aluminium door track and pelmet (combined) for smooth, trouble free operation see page 25.

Base Rails, Side Rails and End Frames: Tanalised 100mm x 50mm (4”x 2”) timber base and side rails. Tanalised 75mm x 75mm (3”x 3”) timber end frames. Aluminium option available see pages 27-28.

Ventilation: Optional side netting with internal roll-down polythene screen. Also available, louvres, roof vents and automatic ventilation systems see pages 23-26.

Please Note: All prices exclude VAT

Construction service available by quotation.


20

26ft 6in (8m) WIDE MULTI-SPAN POLYTUNNEL For a quotation please Call: 01282 873120, Email: sales@npstructures.co.uk. or configure online at www.northernpolytunnels.co.uk

Multi-span polytunnels make the best use of your available space as there are no redundant areas between each bay. Typically around 20% higher at the apex, but due to the extra height being in the ‘leg’ they have approximately 25%30% more volume, providing a more harmonised environment which is less susceptible to sudden temperature rises. Irrigation with overhead spray-lines allows overlapping from bay to bay which increases the distribution uniformity. BAY WIDTH

DOOR LINTEL AND GUTTER HEIGHT

MAX. DOOR OPENING WIDTH

OVERALL HEIGHT

HEIGHT OF STRAIGHT SIDE

STANDARD HOOP SPACINGS

DIAGONAL BRACINGS PER END

HOOP DIAMETER

BRACINGS DIAMETER

26ft 6’ (8m)

2.2m (7’2”)

6.4m (21’)

3.96m (13’)

1.83m (6’)

2.44m (8’)

7

60mm (2 1/2”)

50mm (2”)

Steel: All steel tubes are galvanised both inside and outside for longer life (to Z35 standard) with a 1.5mm wall thickness. Hoops: Two-piece, 60mm steel hoops spaced at 8ft apart (closer spacings can be catered for). 1.83m (6’) straight sides allows a full working height right up to the inside edge of the structure. Ground Tubes: Thick walled (3.25mm), heavy gauge, galvanised foundation tubes give longer life and provide a secure structure.

Base Rails, Side Rails and End Frames: Tanalised 100mm x 50mm (4”x 2”) timber base and side rails. Tanalised 75mm x 75mm (3”x 3”) timber end frames. Aluminium option available see pages 27-28.

Anti-Hotspot Tape: Padded foam tape which acts as insulation between the metal and the polythene, to prevent the build-up of heat in the steel frame being transferred to the polythene. Extends the life of the polythene sheet by at least one year. Doors: Single or double sliding aluminium doors incorporating our Ali-trap polythene fixing system. One-piece, aluminium door track and pelmet (combined) for smooth, trouble free operation see page 25. Ventilation: Optional side netting with internal roll-down polythene screen. Also available, louvres, roof vents and automatic ventilation systems see pages 23-26.

Price Promise – If you get a cheaper quote elsewhere, we’ll beat it (based on a like for like basis).

POLYTUNNELS

Cross Bracing Bars (Crop Bars): Optional 50mm tubular steel bracing bars (crop bars), supported from the ridge tube by two 32mm tubular steel hangers. Cross bracing bars, not only add strength to the structure but are also used for suspending irrigation spray lines, tying up crops such as tomatoes and vines, and for suspending hanging baskets see page 53.

Polythene: Our standard cladding is 720g (180µm) ‘Visqueen’ anti-drip polythene, with either a clear or diffused option.  We also offer a 600g (150µm) 50:50 option, which only has half the normal level of diffusion, making it 50% clear and 50% diffused.  See pages 35-38 for more details.   Our polytunnel design allows the polythene to be  re-tensioned after fitting to get a drum-skin tight cover.


21

New Development - ALTUS

ALTUS

Our aim is to design a structure that will solve the issues that polythene clad structures have and bring the structure up to modern EN glasshouse standards.

Our Goals Are

50% Energy Savings compared with

standard glass with thermal screens and pipe heating. High bay trellis type structure with crop loading capabilities

Overall Height 6.7m

Continuous roof ventilation Easy fit polythene sheet fixing system

Height Under Trellis Beam 3.95m

Height Under Gutter 4.5m

Air inflated twin skin coverings Low humidity growing conditions Column Centres 8m

Quick assembly Cost effective with a good return on investment We believe that polythene films have now overtaken glass as a greenhouse cladding material. Over the last 20 years polythene manufacturers have included various additives within their polytunnel covers which slow down the rate of night-time heat loss, reduce condensation forming on the underside of the polythene and also which diffuse sunlight to make it more useable by the plant.

More recently we’ve seen polythene films, which are UV open, allowing UV light to pass through (unlike glass) which can have several benefits to your crop. In the future we anticipate films that will deter specific pests and diseases, and films that will react with the changing atmospheric conditions to optimise the internal growing environment.

CERTIFICATE OF CONFORMITY OF THE FACTORY PRODUCTION CONTROL Notified Body No. 1224 In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation or CPR), this certificate applies to the construction product

Welded Structural Steel Components intended for load bearing applications Execution Class

Up to EXC2

Declaration Method

Design Methods 1; 2; 3a and 3b

Welding Process(es)

135

Parent Metal(s)

S275R + AR S355J2 + N

Parent Metals Group(s) & Sub Group(s)

1.1; 1.2

Responsible Welding Co-ordinator

Mr Harry Hobman

produced by

POLYTUNNELS

NP Structures Ltd t/a Northern Polytunnels Mill Green Waterside Road Colne Lancashire BB8 0TA

and produced in the manufacturing plant NP Structures Ltd t/a Northern Polytunnels Mill Green, Waterside Road, Colne, Lancashire BB8 0TA This certificate attests that all provisions concerning the assessment and verification of constancy of performance described in Annex ZA of the standard

EN 1090-1:2009+A1:2011 under system 2+ are applied and that the factory production control fulfils all the prescribed requirements set out above. This certificate was first issued on 30 June 2014 and will remain valid until the date of expiry shown, provided that the test methods and/or factory production control requirements included in the harmonised standard, used to assess the performance of the declared characteristics, do not change, and the product, and the manufacturing conditions in the plant are not modified significantly.

Certificate number: 1224-CPR-0560

Kevin Towler Director

Date of initial BM TRADA Certification: 30 June 2014 Date of last issue:

BM TRADA Certification Ltd, Chiltern House, Stocking Lane, High Wycombe, Buckinghamshire, HP14 4ND, UK

30 June 2014

This certificate remains the property of BM TRADA Certification Ltd. This certificate and all copies or reproductions of the certificate shall be returned to BM TRADA Certification Ltd or destroyed if requested. Further clarification regarding the scope of this certificate and verification of the certificate is available through BM TRADA at the above address or at www.bmtrada.com

Certificate expiry date: 29 June 2017

To enable us to manufacture this type of greenhouse structure competitively we have implemented CASTA design software which is specifically designed to calculate the design loads on greenhouses to current EN standards. We have implemented ISO 9001 and gone through the certification process to BS-EN1090 which enables us to issue our ALTUS structure with a CE certificate. Please Note: All prices exclude VAT


22

This is a fully calculated design which meets EN glasshouse standards, enabling it to be issued it with a CE certificate. A range of options are available which include continuous roof vents and twin-skinning.  Also available in a range of heights up to 4.5m (to the gutters).  Using the latest software we are able to specify this structure to withstand UK wide snow and wind loads.  We aim to supply this greenhouse to both ornamental and salad producers.  

Energy Saving and Dehumidification The use of twin-skin polythene films has widely been used to reduce energy costs by 30%. This coupled with our AGAM dehumidifier/heating system should be able to reduce energy use compared to a conventional glasshouse fitted with thermal screens. Recent tests by Farm Energy have shown a 50%-60% energy cost saving and provide better growing conditions with the related lower humidity benefits. Read more about the AGAM on pages 81-82

The next stage is to build a full scale prototype structure, minimum 1000m2, to prove these concepts, ideas and energy savings. We anticipate this greenhouse will be ready for sale by mid 2016. Please call if you are interested, so we can keep you informed with our developments and the results that are being produced.

POLYTUNNELS

A detailed study of the manufacturing process has lead us to invest in robotic welding equipment to produce the trellis beams efficiently and also CNC plasma cutting equipment.


23

Ventilation Screens

Roll-Down Ends With Net

Side Netting With Roll-Down Screen

Roll-Down Screen From Gutter

POLYTUNNELS

Wind-Up Curtains

Wind-Up Curtains

Please Note: All prices exclude VAT

Roll-Down Ends Without Net

Roll Down Side Ventilation Screens These provide a neat and reliable side ventilation system. A 50mm diameter aluminium drive tube is operated by a manual gearbox – simply turn the crank handle to lower or raise the screen.  An automatic 24vDC motorised option is available, which opens and closes with the flick of a switch.  This option is only around £200 extra, but has the added advantage that temperature sensors can be incorporated to give fully automatic operation.  Controllers can be supplied which allow incremental operation, where the screens partially opens at a user defined set point.  If the temperature continues to rise then the screens open a little more, and so on.  When the temperature falls below a pre-set temperature, the same ‘staged’ closing happens.  This helps to maintain a constant temperature and stops the screens going up and down like a yo-yo.   Roll Down End Ventilation Screens For maximum ventilation, we offer roll down end screens to allow full ventilation on all four sides.  The ends can be netted, or left open to allow access.  These too can be fitted with 24vDC motors for automatic operation.   Double Drive Tube Ventilation Screens Screens that are fitted with an additional middle drive tube give extra support to the screen, reducing the ‘sail’ effect.  Usually used on structures with extra high sides (above 2.1m) or where faster opening and closing is preferred.  The same control options are available as our standard roll down side screen (above).   Wind Up Curtain These have been used successfully for many years, and have proved a simple yet effective means of ventilation.  A two-way, hand operated winch system draws the curtain snuggly up to the mid/side rail, in to the closed position.  When reversed, the curtain drops back down, allowing ground level draft proofing with higher level airflow.  The polythene curtain is fixed at ground level to the base rail.


Ventilation Screens

24

Manual Gearbox

24vDC Motor With 45° Telescopic Arm

Manual Gearbox (Back to Back)

Watch Online - Roll-Up Motor northernpolytunnels.co.uk/motor

Manual Gear System Fitted internally on our roll down screens. Provides an economical means of operating your side ventilation system, using the crank handle provided. A single gearbox can operate up to 50m (160ft) of standard screen on a single-span polytunnel. Over this length we simply split the screen in two with a gearbox operating from each end, or both together (back to back) half way along.

24vDC Motor With Vertical Support Tube

POLYTUNNELS

For higher sided polytunnels and multi-span tunnels the maximum length for a manual operated single screen is approx. 37m (120ft) before we split the screen in two. See page 48 for manual gear boxes. Automatic 24vDC Gear System Usually mounted externally, on either a 45 degree telescopic arm or on to a vertical support tube with a drive carriage. These are wired to a control panel allowing operation at the flick of a switch. Commonly used in conjunction with a thermostat for fully automated operation, which opens and closes in small steps providing a more constant temperature. Can be supplied in kit form for upgrading a manual system. An increasingly popular feature on our multi-span structures and longer single span tunnels. See page 70 for motors and controllers.


25

Doors

Sliding doors can be fitted as a single door or double door. These can be fitted to the end or the side of a structure. Our Sliding doors have a heavy duty aluminium door track incorpo rating a rain pelmet. This is supplied in a full, single length for easy and fast fitting. Hinged doors available on request. Double sliding door sets have a central drop bolt to secure the doors in the closed position. The kit also includes door guides, handles, cladding and all the parts required to make fully operational. Our standard doors and louvres are manufactured using a structural aluminium box-section extrusion incorporating our unique Ali-Trap polythene fixing system.

POLYTUNNELS

Our heavy duty timber sliding doors are manufactured from 75mm x 50mm (3” x 2”) treated timber. Supplied with a sliding door track and all the necessary fixtures and fittings, and clad with polythene and/or netting. Each individual door measures 1.5m (4’11”) wide x 2.16m (7’) high, Other sizes can be catered for. Our doors can be purchased as complete kits for retrospectively fitting to existing polytunnels, call for details.

Please Note: All prices exclude VAT

Description

Approx Price

Standard Single Aluminium Sliding Door Kit

£145.00

Standard Double Aluminium Sliding Door Kit

£283.00

Single Timber Sliding Door Kit

£110.00

Double Timber Sliding Door Kit

£220.00


26

Louvres

The louvres are easily fitted to the ends of our structures. They can be used in conjunction with doors and the configuration can vary, depending on the size of your structure. Our standard louvres have a 3 positional hinge with a simple pull-cord operation. This allows the louvre to be set in the fully open, fully closed or half open position. Ventilation Louvres - Pull Cord Top ventilation louvres fit in the ‘D’ panel above the doors to create an effective solution for ventilation. Louvres feature our unique 3 positional hinge which locks the louvre in place. This allows the louvre to be set in the fully open position, 2/3 open, 1/3 open or closed. Ventilation Louvres - Rack and Pinion These louvres feature a rack and pinion system for opening, controlled by a gearbox with winding handle. The rack and pinion louvres are fully adjustable, not just limited to the three positions like the pull cord louvres.

For multi-span polytunnels all the end louvres can be linked together for synchronised operation. These can be motorised and fully automated.

Description

Price From

Pull Cord Louvres

£100.00

Rack and Pinion Louvres

£200.00

POLYTUNNELS

Rack and pinion louvres are the most popular choice.


27

End Frames

Aluminium End Frames with Aluminium Doors and Louvres

These can be made from either timber or aluminium box section. Even though we use 75mm x 75mm (3” x 3”) treated timber, it still has a limited life expectancy, approx. 20 years.  Aluminium on the other hand is much stronger and will last a lifetime, but costs around twice the price.  Timber is a natural product and as such can be prone to a small amount of warping and twisting over time.  This may be a consideration if fitting a large number of doors and louvres. Whereas polythene is fastened to timber end frames using wooden battens, our aluminium box section incorporates the Ali-Trap polythene fixing system where plastic strips are used to hold the polythene in to a pre-formed channel in the aluminium (see page 45 for further details).

POLYTUNNELS

When supplying aluminium ends we also attach a curved double Ali-Trap rail over both end hoops (see page 45 for more info). This allows the main polythene sheet to be fastened to the end hoops, rather than pulled around the corners and fixed to the end frames.  Separate smaller pieces of polythene are then used to clad the ends.  Not only do you get a much neater, pleat-free finish to your structure, but any damage to the ends is not damaging the main cover.

Timber End Frames with Aluminium Doors Please Note: All prices exclude VAT

Aluminium End Frames

Timber End Frames with Aluminium Doors and Louvres


Side Rails

28

Timber Base Rail and Timber Mid Rail

These can be made from either timber or aluminium box section. Even though we use 100mm x 50mm (4” x 2”) treated timber, it still has a limited life expectancy, approx. 20 years.  Aluminium on the other hand is much stronger and will last a lifetime, but costs around twice the price.  Timber is a natural product and as such can be prone to a small amount of warping and twisting over time, yet it still remains the most popular option. Whereas polythene and netting are fastened to timber side rails using wooden battens, our aluminium side rails incorporate the Ali- Trap polythene fixing system where plastic strips are used to hold the polythene in to a pre-formed channel in the aluminium (see page 45 for further details).   Timber side rails can be used in conjunction with aluminium ends.  This option gives you all the benefits of the aluminium end frames, but the costs are kept lower by using timber on the sides where it’s less prominent. Timber Base Rail with Timber Mid Rail

Aluminum Mid Rail with ‘W-Wire’ Fixing System

POLYTUNNELS

Aluminium Base Rail with Aluminium Mid Rail


29

Polytunnel Gutters

It is widely recognised that most polytunnels are fitted with inadequate gutters. This is partly due to a lack of understanding by manufacturers, but also due to the extra cost of fabricating wider, deeper gutters which would cope with heavy rainfall (especially on longer structures). Costs are also increased when producing gutters from thicker steel with a heavier coating of zinc galvanise. Our new 155mm deep gutter will hold at least twice as much water as a standard 75mm deep gutter. When you look at the profile of our gutter you will also notice that there is 80mm of straight side, whereas most other gutters have fully inward sloping sides. This further increases the volume, making our gutters deep enough and wide enough to cope with the rigours of the whole UK climate, even on long structures.

The 160mm outlet spout provides max discharge, which is 2.5 times greater than the 110mm spout which has been widely adopted by most of our competitors. With a vertical gutter outlet spout the water has to spiral downwards in order to escape (like in a bath), hence slow to drain as it spends time rotating, resulting in overflowing gutters.  Our 45 degree angled gutter outlet allows the water to evacuate swiftly without rotating, like a water chute, increasing the flow rate by at least a further 30%. This direct, high velocity discharge greatly reduces the chance of blockages.

POLYTUNNELS

Gutter Comparison

Width

Depth

Wall Thickness

Steel Grade

Outlet

Galvanising

Northern Polytunnels

271mm

155mm

1.8mm

S250 GD

160mm with 45° angled spout

275gr./m² pre-galvanised zinc coated (Z275)

Other Manufacturers

200mm

75mm

1.5mm

S220

110mm (or less) with a vertical spout

225gr./m² galvanise zinc coated (Z225)

Wall Thickness: Northern Polytunnels’ gutters are 20% thicker. Steel Grade: S220 is a lower steel grade than the S250 GD that Northern Polytunnels use. Outlet: Vertical discharge is much slower than a 45° outlet, and 110mm is simply too narrow to allow the water to escape adequately. Galvanising: Northern Polytunnels gutters are 22.5% heavier galvanised. Please Note: All prices exclude VAT


30

Rainwater Pipe and Fittings Rainwater Drain Pipe (Ring Seal One End)

Threaded 90° Bend

-

Widely used on water tank over-flows where a 4” take-off unit (tank connector) is fitted to the top ring.

Class 51 for above ground use and class 41 for below with light traffic loads. Phone for quantity discounts. All160mm and 200mm pipe and fittings have ring seals. 110mm pipe has solvent weld connection.

One is also fixed to the inside facing upwards to raise the water level. Female threaded at one end, glue joint at the other

Ref

Description

Price

RDP 110

110mm OD x 5m For Above Ground Use (7.5 bar)

£26.90

GDP 160

160mm OD x 5m For Above Ground Use (Class 51)

£31.32

RDP 161

160mm OD x 5m For Below Ground Use (Class 41)

£38.10

Ref

Size

Price

RDP 200

200mm OD x 5m For Below Ground Use (Class 41)

£60.30

RDB 115

110mm x 4” Female BSP

£29.50

These are our most popular rainwater fittings - many other sizes available - Full price list available on request.

45° Bend with Ring Seal (Both Ends)

45° Bend with Ring Seal (One End)

88° Bend

Ref

Size

Price

Ref

Size

Price

Ref

Size

Price

GDP 162

160mm

£11.21

RDB 161

160mm

£10.22

RDB 160

160mm

£12.70

RDB 202

200mm

£23.00

RDB 201

200mm

£29.92

RDB 200

200mm

£29.10

Equal Tee

88° Reducing Tee

Size

Price

RDT 160

160mm

£17.48

Ref

Size

RDT 200

200mm

£33.79

RDT 202

200 x 160 x 200mm

Ref

Size

Price

Price

RDT 161

160mm

£18.55

£30.41

RDT 201

200mm

£36.43

POLYTUNNELS

Ref

45° Angled Tee


31

Shade Houses

Hardy trees, shrubs and vines, including azaleas, camellias rhododendrons and tree ferns are not always suited to the growing environment a polytunnel provides. Northern Polytunnels have therefore developed the Shade Hall. This provides semi-shading and protection from direct sunlight, which for nursery stock at various levels of growth is an essential factor.

The shade house is manufactured from 50mm (2”) diameter, Z35 high tensile pre-galvanised steel tubing. The structure is based on a grid layout, with each section of the grid measuring 3.75m x 3.75m, and the overall height being approximately 2.7m. This economic design of the shade house allows excellent accessibility and full use of the floor area. The roof of the shade hall is clad with Paraweb.

POLYTUNNELS

This heavy duty material gives 40-45% shade. Crucially, the flat tape design of Paraweb allow the straps to tip to either side when loaded with snow, making this flat roof design suitable for the UK climate. The sides of the shade house are clad with 40% shade netting, which is manufactured from a knitted polyethyl ene monofilament. Clear sections can be left for access, al ternatively doors are available with the structure, each measuring 0.89m wide x 2.55m high. Both of these materials allow free air circulation, but provide shelter from strong winds, which could otherwise cause damage to plants.

Please Note: All prices exclude VAT


Shade Tunnels

32

As well as our shade houses, we also offer shade tunnels. These are our standard tunnel framework (all sizes), clad with shade netting instead of polythene.  We can also clad part of the tunnel with polythene and part with netting.

POLYTUNNELS

Although we mostly clad netted tunnels with shade netting, typically 40-45% shade value, we can also fabricate other types of netting to cover our structures. Various types of bird nettings, anti-hail netting, insect & butterfly nettings etc. can all be used.  We were even asked to make a large structure to cover a whole vegetable garden/allotment (30ft x 66ft), and cover it with netting to deter birds and butterflies.   Your tunnel doesn’t need to be fully netted.  We often get asked for tunnels which are partly clad with polythene and partly clad with netting.  This can be used to create a hardening off area without you having to move your plants too far away, or alternatively cover with anti-insect or bird netting.


33

Insulated Polytunnels (Twin Skinned)

Polythene clad structures (polytunnels) hold heat as well, if not better, than glass structures. Twin-skinned polythene clad structures can reduce the rate of heat loss by a further 30%40% compared to single-skinned polythene structures.  So it can make perfect sense to twin-skin your polytunnel where heat inputs are used.  This is a relatively simple task which requires an inflation fan to blow air  between the two layers of polythene.   Clear polythene covers are often preferred, as two diffused covers could restrict too much daylight. The fan is operated by air pressure, so as air leaks out from between the two polytunnel covers (causing a fall in pressure) the fan’s sensor automatically switches it on and tops up the air.  During periods of snow, the air pressure can be relaxed to allow the sheets to touch, thus using the heat transfer to melt any unwanted snow loading.   Twin-skinned polytunnels can be supplied as a complete package, or we can upgrade existing polytunnels.  Alternatively, you can purchase the parts required (see page 65).   Several covers can be inflated from a single fan (up to 1,000m²), using our ‘linking’ kits. For Prices See Page 74 

1

2

POLYTUNNELS

4 3 11 5

8

9

12

10

6 7 Please Note: All prices exclude VAT

13

14

1: 2: 3: 4: 5: 6: 7:

Poly film Polythene connector (part 1) Poly Film Air adjust duct Polythene connector (part 2) Clamp Aluminum flex tube

8: Clamp 9: Bolt 10: Polythene connector (part 3) 11: Blower mounting bracket 12: Locknut 13: Inflation blower 14: Pressure adjust duct


Crop Support Systems

34

A range of crop support systems are available, both for new polytunnels and existing greenhouses. Bespoke drip irrigation systems can also be incorporated.  Phone for details.

Fully Ventilated Ends

Where a cooler environment is required we can supply fully ventilated ends, or alternatively just netted ‘D’ panels above the doors.

Overhead Irrigation Spray-Lines

POLYTUNNELS

All of our polytunnels, both single span and multi-span tunnels are available with twin-line irrigation systems. Each polytunnel/bay width has its own specific nozzle which is precisely matched to that particular width of structure.  These are available for single strip watering or overlapping. Single strip watering is where each spray-line waters half of the polytunnel (each side of the central path) without over lapping on to the other side of the tunnel.  This is used in single span polytunnels, and sometimes in multi-span tunnels where overlapping isn’t desirable. Overlapping irrigation is where each spray-line overlaps half of the wetted area of the spray-lines to either side.  This effectively give 100% overlap of the area between the first and last spray-line, as each line is overlapped from both sides.  This gives the most uniform coverage, and is widely used in multi-span polytunnels where even watering across the whole area is required. By ordering your overhead irrigation system with your polytunnel you can ensure you get the most accurate system for your particular polytunnel.


35

Polytunnel Covers

Visqueen’s new generation polythene films combine all the benefits of previous films (great thermic and light transmission properties), but unlike normal greenhouse films (and glass) which prevent short wavelength UV light (UVB) from reaching your crop, this ‘UV open’ film allows UVB to enter the greenhouse. This can have many benefits for both edible and ornamental crops, such as enhancing the fragrance, taste, colour, earlier harvesting and longer post-harvest shelf life. In addition, ‘UV open’ films pro mote plant anti-oxidants which are good for health & encourage stronger plants. This greatly benefits plant raisers and young plant growers as stronger plants can be easier to plant out thus saving time and money.

Long-Life: Our polytunnel covers are 180 micron (720g) thickness, and have a 7 season guarantee against UV degradation (with the exception of green and white blackout polythene and Super Lux 50:50) However, it’s not unusual for our covers to be replaced after 10-12 years (or even longer). Remember—an extra season or two not only makes a thicker cover more economical but also saves on the cost of fitting. Thinner, cheaper films are available with a 4-5 season guarantee, but our polythene far exceeds our expectations and are more resistant to mechanical damage.

Calculating Sheet Width You should measure over the circumference of the polytunnel using a reel tape measure (or a piece of rope), and make the following allowances: Trenching in to the ground

Fixing to a base rail

Fixing to a side rail

Fixing in to a gutter

Add 1mtr per side

Add 0.5mtr per side

Add 0.5mtr per side

Add 0.5mtr per side

The table below is for guidance only and includes the above allowances required for the various fixing methods.

POLYTHENE COVERS

SINGLE-SPAN POLYTUNNELS Width of Polytunnel

Trenched into Ground

Fixed to Ground Rail

Fixed to Side Rail

14ft (4.3m)

9.2m wide

9.2m wide

7.3m wide

18ft (5.5m)

11.1m wide

11.1m wide

9.2m wide

21ft (6.4m)

14m wide

11.1m wide

9.2m wide

24ft (7.3m)

14m wide

14m wide

11.1m wide

27ft (8.2m)

14m wide

14m wide

11.1m wide

30ft (9.1m)

N/A

14m wide

14m wide

MULTI-SPAN POLYTUNNELS Width of Polytunnel

Trenched into Ground

Fixed to Ground Rail

Fixed to Side Rail

Gutter to Gutter

21ft 6in (6.55m)

11.1m wide

11.1m wide

9.2m wide

9.2m wide

26ft 6in (8.08m)

14m wide

14m wide

11.1m wide

9.2m wide

Calculating Sheet Length Once you’ve measured the length of your polytunnel you need to make an allowance for the ends, especially if your cover is fixed to the end frames rather than fixed to the end hoops. The width of the structure and the width of the doors are the main considerations. As a general rule, when fixing to the end frames you should add 3mtr (10ft) per end, so for a 30mtr (100ft) tunnel you would order 36mtr (120ft) long polythene sheet. A further 3mtr (10ft) could also be required to allow for the panels at each side of the door openings (if required). This extra 3mtr (10ft) should be enough to allow to both ends of the tunnel. Please Note: All our measurements are based on current Northern Polytunnel models. Measurement and allowance guidelines are given in good faith, but due to variability in polytunnel design, no responsibility can be accepted for polythene orders which are placed on the basis of these guidelines if later found to be the wrong size. Please Note: All prices exclude VAT


36

Lumisol Clear Polythene WIDTH LENGTH

7 Year Guarantee*

7.3mtr

9.2mtr

11.1mtr

14mtr

5 mtr

£36.77

£45.40

£54.02

£67.06

6 mtr

£43.22

£53.53

£63.85

£79.43

7 mtr

£49.63

£61.61

£73.59

£91.71

8 mtr

£55.98

£69.62

£83.27

£103.89

9 mtr

£62.28

£77.57

£92.86

£115.97

10 mtr

£68.54

£85.46

£102.38

£127.96

11 mtr

£74.28

£92.83

£111.37

£139.40

12 mtr

£80.44

£100.60

£120.75

£151.21

13 mtr

£86.56

£108.31

£130.05

£162.93

14 mtr

£92.62

£115.96

£139.29

£174.56

15 mtr

£98.65

£123.55

£148.46

£186.10

16 mtr

£104.62

£131.09

£157.55

£197.55

LIGHT TRANSMISSION

Up to 92%

17 mtr

£110.55

£138.57

£166.58

£208.92

THICKNESS

720g (180µm)

18 mtr

£116.44

£145.99

£175.54

£220.21

THERMIC EFFECT

Over 80%

19 mtr

£122.08

£153.36

£184.44

£231.41

DIFFUSION

Less than 35%

20 mtr

£128.08

£160.68

£193.27

£242.53

21 mtr

£133.84

£167.94

£202.03

£253.56

22 mtr

£139.55

£175.14

£210.73

£264.52

23 mtr

£145.23

£182.30

£219.37

£275.39

24 mtr

£150.86

£189.40

£227.94

£286.19

Due to its clarity, clear polythene allows around 2% more light to pass through the polythene compared to a light-diffusing film. Although light-diffusing films have several advantages over clear films, if the extra light is more beneficial to your crop (or geographical latitude) then ‘Lumisol’ clear polythene may be the right choice. Thermic Effect: The thermicity of Lumisol polythene can give 3-4°C frost protection, or reduce energy costs by approx. 10% in heated polytunnels. Anti-Fog (condensation reduction)

*Incremental guarantee from invoice date

£156.45

£196.45

£236.45

£296.90

£162.00

£203.45

£244.90

£307.54

27 mtr

£167.51

£210.40

£253.29

£318.11

28 mtr

£172.41

£217.30

£261.61

£328.59

29 mtr

£178.41

£224.15

£269.88

£339.00

30 mtr

£183.80

£230.95

£278.09

£349.34

31 mtr

£189.16

£237.70

£286.24

£359.60

32 mtr

£194.47

£244.40

£294.33

£369.79

33 mtr

£199.75

£251.06

£302.37

£379.91

34 mtr

£204.99

£257.67

£310.35

£389.96

35 mtr

£210.20

£264.23

£318.27

£399.93

36 mtr

£215.37

£270.75

£326.13

£409.84

37 mtr

£220.50

£277.22

£333.95

£419.68

38 mtr

£225.59

£283.65

£341.71

£429.45

39 mtr

£230.66

£290.03

£349.41

£439.15

40 mtr

£235.68

£296.37

£357.06

£448.79

41 mtr

£240.67

£302.67

£364.66

£458.35

42 mtr

£245.63

£308.92

£372.21

£467.86

43 mtr

£250.55

£315.13

£379.70

£477.30

44 mtr

£255.44

£321.30

£387.15

£486.67

45 mtr

£260.30

£327.42

£394.54

£495.98

46 mtr

£265.13

£333.50

£401.88

£505.23

47 mtr

£269.92

£339.55

£409.18

£514.41

48 mtr

£274.68

£345.55

£416.42

£523.54

49 mtr

£279.40

£351.51

£423.62

£532.60

50 mtr

£284.10

£357.43

£430.77

£541.60

POLYTHENE COVERS

Thanks to its unique additive, Lumisol® is able to control the condensation of water on the underside of the tunnel cover. Providing the film is correctly fitted, water will condense uniformly as a very thin layer which, instead of remaining in position as droplets creating a fogging effect, runs down the sheet. This reduces the risk of water dripping on to the plants below and prevents the loss of light caused by these droplets, which can amount for as much as 15% light reduction. The effectiveness is reduced over the life of the cover, but an anti-condensation solution (Sunclear©) can be re-applied with a sprayer after several years if required.

25 mtr 26 mtr


37

Lumisol Diffused Polythene WIDTH

7 Year Guarantee*

7.3mtr

9.2mtr

11.1mtr

14mtr

5 mtr

£39.61

£48.93

£58.53

£72.46

6 mtr

£46.62

£57.75

£69.24

£85.88

7 mtr

£53.57

£66.51

£79.86

£99.20

8 mtr

£60.47

£75.20

£90.40

£112.41

9 mtr

£67.32

£83.83

£100.85

£125.53

10 mtr

£74.11

£92.38

£111.23

£138.54

11 mtr

£80.39

£100.41

£121.06

£150.99

12 mtr

£87.08

£108.84

£131.28

£163.80

13 mtr

£93.72

£117.20

£141.42

£176.52

14 mtr

£100.31

£125.50

£151.49

£189.14

15 mtr

£106.85

£133.74

£161.48

£201.66

16 mtr

£113.34

£141.91

£171.39

£214.09

LIGHT TRANSMISSION

Up to 90%

17 mtr

£119.78

£150.03

£181.23

£226.43

THICKNESS

720g (180µm)

18 mtr

£126.18

£158.08

£190.99

£238.68

THERMIC EFFECT

Over 80%

19 mtr

£132.52

£166.07

£200.68

£250.83

DIFFUSION

Up to 90%

20 mtr

£138.82

£174.01

£210.30

£262.90

21 mtr

£145.08

£181.88

£219.85

£274.87

22 mtr

£151.28

£189.70

£229.33

£286.76

23 mtr

£157.44

£197.46

£238.74

£298.56

24 mtr

£163.56

£205.17

£248.09

£310.28

25 mtr

£169.63

£212.81

£257.36

£321.90

26 mtr

£175.66

£220.41

£266.56

£333.45

27 mtr

£181.64

£227.94

£275.70

£344.91

28 mtr

£187.58

£235.43

£284.78

£356.29

29 mtr

£193.48

£242.86

£293.79

£367.59

Light-diffusing polythene films scatter the light as it passes through the polythene. This enables the light to penetrate deep in to the plant canopy, as it hits the plant from all directions, not just from the direction of the sun. This ‘diffused’ light reduces the higher foliage from shading the lower parts of the plant. Light diffusing films allow more light in to your polytunnel when the sun is low in the sky (early or late in the day, and also during the short days of winter). The diffusing process deflects more light downwards in to the crop, rather than being reflected upwards as happens with glass and clear polythene

POLYTHENE COVERS

LENGTH

Lumisol Diffused can reduce mid-day summertime temperatures by 2-4°C

30 mtr

£199.34

£250.23

£302.79

£378.80

31 mtr

£205.15

£257.56

£311.61

£389.94

Anti-Fog (condensation reduction)

32 mtr

£210.93

£264.83

£320.43

£401.00

33 mtr

£216.66

£272.05

£329.19

£411.98

34 mtr

£222.35

£279.22

£337.88

£422.88

35 mtr

£228.00

£286.34

£346.51

£433.71

36 mtr

£233.62

£293.41

£355.09

£444.46

37 mtr

£239.19

£300.43

£363.60

£455.13

38 mtr

£244.73

£307.40

£372.05

£465.73

39 mtr

£250.22

£314.32

£380.45

£476.26

40 mtr

£255.68

£321.20

£388.79

£486.72

41 mtr

£261.10

£328.03

£397.07

£497.10

42 mtr

£266.49

£334.81

£405.29

£507.42

43 mtr

£271.83

£341.54

£413.46

£517.65

44 mtr

£277.15

£348.23

£421.57

£527.83

45 mtr

£282.42

£354.88

£429.62

£537.93

46 mtr

£287.66

£361.48

£437.63

£547.96

47 mtr

£292.86

£368.03

£445.57

£557.93

48 mtr

£298.03

£374.54

£453.47

£567.83

49 mtr

£303.17

£381.01

£461.31

£577.67

50 mtr

£308.27

£387.43

£469.10

£597.14

Thanks to its unique additive, Lumisol® is able to control the condensation of water on the underside of the tunnel cover. Providing the film is correctly fitted, water will condense uniformly as a very thin layer which, instead of remaining in position as droplets creating a fogging effect, runs down the sheet. This reduces the risk of water dripping on to the plants below and prevents the loss of light caused by these droplets, which can amount for as much as 15% light reduction. The effectiveness is reduced over the life of the cover, but an anti-condensation solution (Sunclear©) can be re-applied with a sprayer after several years if required.

*Incremental guarantee from invoice date

Please Note: All prices exclude VAT


38

SuperLux 50:50 Polythene WIDTH LENGTH

7.3mtr

9.2mtr

11.1mtr

14mtr

5 mtr

£34.80

£41.01

£47.22

£56.69

6 mtr

£39.52

£46.95

£54.38

£65.73

7 mtr

£41.71

£50.37

£59.02

£72.24

8 mtr

£46.39

£56.26

£66.14

£81.21

9 mtr

£51.05

£62.13

£73.22

£90.23

10 mtr

£58.19

£70.48

£82.77

£102.13

11 mtr

£62.81

£76.30

£89.78

£111.49

12 mtr

£67.41

£82.11

£97.18

£120.82

13 mtr

£72.00

£87.89

£104.55

£130.11

14 mtr

£76.56

£93.83

£111.90

£139.37

15 mtr

£81.12

£99.89

£119.21

£148.59

16 mtr

£85.65

£105.93

£126.50

£157.79

17 mtr

£90.19

£111.95

£133.77

£166.94

18 mtr

£94.95

£117.95

£141.00

£176.07

19 mtr

£99.69

£123.92

£148.21

£185.16

20 mtr

£104.41

£129.88

£155.40

£194.22

21 mtr

£109.12

£135.81

£162.56

£203.24

22 mtr

£113.80

£141.72

£169.69

£212.23

23 mtr

£118.48

£147.60

£176.80

£221.20

24 mtr

£123.13

£153.47

£183.88

£230.12

25 mtr

£127.77

£159.32

£190.93

£239.02

26 mtr

£132.39

£165.14

£197.96

£247.88

27 mtr

£137.00

£170.95

£204.97

£256.71

£141.59

£176.73

£211.95

£265.51

£146.16

£182.49

£218.90

£274.28

30 mtr

£150.72

£188.23

£225.84

£283.02

31 mtr

£155.26

£193.95

£232.74

£291.73

32 mtr

£159.78

£199.66

£239.62

£300.40

33 mtr

£164.29

£205.34

£246.48

£309.05

34 mtr

£168.78

£211.00

£253.31

£317.66

35 mtr

£173.26

£216.64

£260.12

£326.25

36 mtr

£177.72

£222.26

£266.91

£334.80

37 mtr

£182.16

£227.86

£273.67

£343.33

38 mtr

£186.59

£233.45

£280.41

£351.82

39 mtr

£191.01

£239.01

£287.12

£360.29

40 mtr

£195.40

£244.55

£293.81

£368.72

41 mtr

£199.79

£250.07

£300.48

£377.13

42 mtr

£204.16

£255.58

£307.12

£385.50

43 mtr

£208.51

£261.07

£313.74

£393.85

44 mtr

£212.85

£266.53

£320.34

£402.17

45 mtr

£217.17

£271.98

£326.92

£410.46

46 mtr

£221.48

£277.41

£333.47

£418.72

47 mtr

£225.77

£282.82

£340.00

£426.96

48 mtr

£230.05

£288.21

£346.51

£435.16

49 mtr

£234.31

£293.58

£353.00

£443.34

50 mtr

£238.56

£298.94

£359.46

£451.49

The benefits of diffused light vary from crop to crop, month to month and region to region. Across the UK, polytunnel cover sales are split fairly evenly between clear and diffusing polyethylene. Some growers have fully embraced diffused polyethylene whereas others argue that light-diffusing polythene is better suited for sunnier climates. The reality is that very highly diffusing films perform well under clear skies in the summer months but in cloudy conditions and during the ‘shoulders’ of the growing season sunlight is already diffused and this can lead to too much light being scattered out of the greenhouse. It’s for this reason we developed SuperLux 50:50 which has been designed and formulated to provide just the right level of light diffusion for the UK climate. SuperLux 50:50 has built-in anti-drip (AD) properties which help reduce the risk of fungal diseases such as Downy mildew and Botrytis cinerara. Thanks to the films unique AD technologies condensation on the film surface is much reduced thereby minimising both the risk of water droplets falling on the crop below and light loss caused by those droplets.   We very precisely combine our own blend of IR additives and EVA in such a way as to offer the most effective thermic properties available today. This offers unparalleled protection from frost and low temperatures and maximizes the opportunity for earlier harvesting. SuperLux 50:50 has been designed for the UK market at the industry standard 150 microns thickness and by sourcing only the highest quality materials, coupled with industry leading quality control, we ensure this product has the highest possible mechanical strength and durability. It comes with a 5 year guarantee against premature UV degradation (incremental) but has a life expectancy of 7-8 years. Our huge buying power as the UK’s largest polytunnel manufacturer makes SuperLux 50:50 the most economical polytunnel film available in the UK.

LIGHT TRANSMISSION

Over 90%

THICKNESS

600g (150µm)

THERMIC EFFECT

Over 80%

DIFFUSION

Optimum for UK

POLYTHENE COVERS

28 mtr 29 mtr

SUPER LUX


39

White UVI Polythene WIDTH 7.3mtr

9.2mtr

11.1mtr

14mtr

5 mtr

£45.49

£54.12

£71.97

£72.46

6 mtr

£53.65

£63.96

£85.29

£85.88

7 mtr

£61.75

£73.73

£98.52

£99.20

8 mtr

£69.78

£83.42

£111.64

£112.41

9 mtr

£77.75

£93.04

£124.66

£125.53

10 mtr

£85.65

£102.58

£137.58

£138.54

11 mtr

£93.04

£111.58

£149.93

£150.99

12 mtr

£100.83

£120.98

£162.66

£163.80

13 mtr

£108.55

£130.30

£175.28

£176.52

14 mtr

£116.22

£139.56

£187.81

£189.14

15 mtr

£123.83

£148.74

£200.25

£201.66

16 mtr

£131.39

£157.85

£212.59

£214.09

LIGHT TRANSMISSION

67% - 68%

17 mtr

£138.89

£166.90

£224.84

£226.43

THICKNESS

720g (180µm)

18 mtr

£146.33

£175.88

£237.00

£238.68

THERMIC EFFECT

55%

19 mtr

£153.71

£184.79

£249.07

£250.83

DIFFUSION

32% - 33%

20 mtr

£161.05

£193.64

£261.05

£262.90

21 mtr

£168.32

£202.42

£272.94

£274.87

22 mtr

£175.55

£211.14

£284.74

£286.76

23 mtr

£182.72

£219.79

£296.45

£298.56

24 mtr

£189.84

£228.38

£308.09

£310.28

25 mtr

£196.90

£236.90

£319.63

£321.90

26 mtr

£203.92

£245.37

£331.09

£333.45

27 mtr

£210.89

£253.77

£342.47

£344.91

28 mtr

£217.80

£262.12

£353.77

£356.29

29 mtr

£224.67

£270.40

£364.99

£367.59

30 mtr

£231.48

£278.63

£376.13

£378.80

31 mtr

£238.25

£286.79

£387.18

£389.94

32 mtr

£244.97

£294.90

£398.16

£401.00

33 mtr

£251.64

£302.95

£409.06

£411.98

34 mtr

£258.27

£310.94

£419.89

£422.88

35 mtr

£264.85

£318.88

£430.64

£433.71

36 mtr

£271.38

£326.76

£441.31

£444.46

37 mtr

£277.87

£334.59

£451.91

£455.13

38 mtr

£284.31

£342.37

£462.43

£465.73

39 mtr

£290.71

£350.08

£472.89

£476.26

40 mtr

£297.06

£357.75

£483.27

£486.72

41 mtr

£303.37

£365.36

£493.58

£497.10

42 mtr

£309.64

£372.93

£503.82

£507.42

43 mtr

£315.86

£380.44

£513.98

£517.65

44 mtr

£322.04

£387.89

£524.08

£527.83

45 mtr

£328.18

£395.30

£534.12

£537.93

46 mtr

£334.28

£402.66

£544.08

£547.96

47 mtr

£340.34

£409.97

£553.97

£557.93

48 mtr

£346.36

£417.23

£563.80

£567.83

49 mtr

£352.33

£424.44

£573.57

£577.67

50 mtr

£358.27

£431.60

£583.27

£597.14

White UVI polythene produces shade and reduces daytime temperatures, allowing 60-70% light transmission.

POLYTHENE COVERS

LENGTH

Ideal for: Crops that require shade and cooler daytime tempera tures such as nursery stock, ferns and conifers. The overwintering of hardy shrubs and for general hardening off. Also widely used in the ag riculture for general livestock housing and also general stor age.

Please Note: All prices exclude VAT


40

Green And White Polythene 14mtr WIDE

5 mtr

£77.26

6 mtr

£91.62

7 mtr

£105.87

8 mtr

£120.01

9 mtr

£134.04

10 mtr

£147.96

11 mtr

£161.31

12 mtr

£175.02

13 mtr

£188.63

14 mtr

£202.13

15 mtr

£215.53

16 mtr

£228.83

17 mtr

£242.03

18 mtr

£255.13

19 mtr

£268.14

20 mtr

£281.05

21 mtr

£293.86

22 mtr

£306.58

23 mtr

£319.20

24 mtr

£331.74

25 mtr

£344.18

26 mtr

£356.53

27 mtr

£368.79

28 mtr

£380.97

29 mtr

£393.05

30 mtr

£405.05

31 mtr

£416.97

32 mtr

£428.80

33 mtr

£440.55

34 mtr

£452.21

35 mtr

£463.79

36 mtr

£475.30

37 mtr

£486.72

38 mtr

£498.06

39 mtr

£509.32

40 mtr

£520.51

41 mtr

£531.62

42 mtr

£542.65

43 mtr

£553.61

44 mtr

£564.49

45 mtr

£575.30

46 mtr

£586.04

47 mtr

£596.70

48 mtr

£607.29

49 mtr

£617.82

50 mtr

£628.27

Green & white polythene was originally formulated to meet the needs of the mushroom grower. The green outer layer helps this cover blend in with the environment, whilst the white inner layer reflects internal lighting to provide a pleasant working environment. A black core layer ensures complete opacity (black-out) and contributes to the durability of the film. This film is widely used for other applications, such as livestock housing, fish farms and protective structures. As this polythene is black-out, artificial lighting will be required.

LIGHT TRANSMISSION

0%

THICKNESS

800g (200µm)

THERMIC EFFECT

N/A

DIFFUSION

N/A

POLYTHENE COVERS

LENGTH


41

Shade House Net Covers WIDTH

Our in-house fabrication department can produce net covers to any size. Our standard shade net covers are dark green with a 40%-45% shade value, but heavier shade values can be catered for.  Our production method spaces the seams between 2m-3m apart (depending on the size), with the seams running parallel with the hoops (width-ways). Bespoke nets can be supplied which can include hemming and eyelets.  Any size can be fabricated. Phone for details. See page 49 for standard rolls of shade netting Width of net required: Chart is for guidance only. If in doubt opt for the next size up.

POLYTHENE COVERS

Single Span Polytunnels

LENGTH

8mtr

10mtr

12mtr

14mtr

4 mtr

£41.60

£52.00

£62.40

£72.80

5 mtr

£52.00

£65.00

£78.00

£91.00

6 mtr

£62.40

£78.00

£93.60

£109.20

7 mtr

£72.80

£91.00

£109.20

£127.40

8 mtr

£83.20

£104.00

£124.80

£123.20

9 mtr

£93.60

£117.00

£118.80

£138.60

10 mtr

£104.00

£110.00

£132.00

£154.00

11 mtr

£114.40

£121.00

£145.20

£169.40

12 mtr

£124.80

£132.00

£158.40

£184.80

13 mtr

£114.40

£143.00

£171.60

£200.20

14 mtr

£123.20

£154.00

£184.80

£215.60

15 mtr

£132.00

£165.00

£198.00

£210.00

16 mtr

£140.80

£176.00

£211.20

£224.00

17 mtr

£149.60

£187.00

£204.00

£238.00

18 mtr

£158.40

£198.00

£216.00

£252.00

19 mtr

£167.20

£209.00

£228.00

£266.00

20 mtr

£176.00

£200.00

£240.00

£280.00

21 mtr

£184.80

£210.00

£252.00

£294.00

22 mtr

£193.60

£220.00

£264.00

£308.00

23 mtr

£202.40

£230.00

£276.00

£322.00

24 mtr

£211.20

£240.00

£288.00

£336.00

25 mtr

£200.00

£250.00

£300.00

£350.00

26 mtr

£208.00

£260.00

£312.00

£364.00

27 mtr

£216.00

£270.00

£324.00

£378.00

28 mtr

£224.00

£280.00

£336.00

£392.00

29 mtr

£232.00

£290.00

£348.00

£365.40

30 mtr

£240.00

£300.00

£360.00

£378.00

31 mtr

£248.00

£310.00

£372.00

£390.60

32 mtr

£256.00

£320.00

£384.00

£403.20

33 mtr

£264.00

£330.00

£396.00

£415.80

34 mtr

£272.00

£340.00

£367.20

£428.40

35 mtr

£280.00

£350.00

£378.00

£441.00

Width of Structure

Trenched Into The Ground

Fixed To A Base Rail

Fixed To A Side Rail

36 mtr

£288.00

£360.00

£388.80

£453.60

14ft (4.3m)

10m Wide

8m Wide

8m Wide

37 mtr

£296.00

£370.00

£399.60

£466.20

18ft (5.5m)

12m Wide

10m Wide

8m Wide

38 mtr

£304.00

£380.00

£410.40

£478.80

21ft (6.4m)

12m Wide

12m Wide

10m Wide

39 mtr

£312.00

£390.00

£421.20

£491.40

24ft (7.3m)

14m Wide

12m Wide

10m Wide

40 mtr

£320.00

£360.00

£432.00

£504.00

27ft ( 8.2m)

14m Wide

14m Wide

12m Wide

41 mtr

£328.00

£369.00

£442.80

£516.60

30ft (9.2m)

16m Wide (POA)

14m Wide

12m Wide

42 mtr

£336.00

£378.00

£453.60

£529.20

43 mtr

£344.00

£387.00

£464.40

£541.80

Multi-Span Polytunnels

44 mtr

£352.00

£396.00

£475.20

£554.40

Width of Structure

Trenched Into The Ground

Fixed To A Base Rail

Fixed To A Side Rail

Gutter to Gutter

45 mtr

£360.00

£405.00

£486.00

£567.00

46 mtr

£368.00

£414.00

£496.80

£579.60

21ft 6in (6.5m)

12m Wide

10m Wide

10m Wide

8m Wide

47 mtr

£376.00

£423.00

£507.60

£592.20

26ft 6in (8m)

14m Wide

12m Wide

12m Wide

10m Wide

48 mtr

£384.00

£432.00

£518.40

£604.80

49 mtr

£392.00

£441.00

£529.20

£617.40

50 mtr

£360.00

£450.00

£540.00

£630.00

Please Note: All prices exclude VAT


PVC Covers

In-House Fabrication Department

42

PVC covers are available in a range of colours

PVC coated fabrics are the preferred cladding material for most garden centre retail canopies, and are available in a range of colours including translucent. Translucent PVC cladding is especially popular due to its higher light transmission properties and has become the standard product in the UK.

Weight: 530gr/m² Flame-retardancy:  Complies to BS 7837: 1996 Tensile strength:  Warp 1200N/50mm, Weft 1100N/50mm (BS3424/ 6B) Tear strength:  Warp 400N, Weft 350N (BS 3424/ 7B) Coating:  Flexible plasticized PVC applied to both sides Contact our sales department for a quotation. 

POLYTHENE COVERS

Our in-house fabrication department can produce PVC sheets to almost any size. All seams are heat welded to create a join which is stronger than the material itself.


43

Sunclear Anti-Condensation Sunclear liquid solution applied to the inside of polythene alters the behav iour of the plastic surface. Droplets are unable to form and the fog ging effect is eliminated. Water condenses on the plastic to form a very thin coating which, instead of remaining in position, runs down the curved sheeting to the outside edges of the greenhouse. Sunclear can be applied to any of the flexible or rigid plastics used in greenhouse constructions. Whilst Sunclear was developed specifically for UVI polythene, PVC and polyester sheeting also respond well to treatment. Up-to 25% more light transmitted Non-toxic and easily applied by spraying or painting (usually applied with a knapsack sprayer) Dripping, which can promote fungal diseases such as Botrytis is eliminated. Quantity: 946ml covers up to 900m2 (9500ft2) or a 21ft x 100ft polytunnel.

Ref

Description

Price

ACC 100

Sunclear 946ml

£33.30

Polytunnel and Glasshouse Liquid Shade (Q3) Q3 white liquid shade is applied with a sprayer, either motorised or knapsack. The amount of shade it provides depends on the strength you dilute it with water.  Even though it will wear of over a period of time (which also depends on the strength), you can apply a ‘remover’ (Removit) which neutralises the bonding agent.  It can then be rinsed off or left until the next rainfall.  Also ideal for glasshouses. This is exactly the same as Redusol, and is mixed and applied in the same way. Light diffusing and heavy shade coatings also available.

PARTS FITTINGS AND SUNDRIES

Coverage: for 60% shade apply 1ltr with 5ltr water to cover 40m² (600m² from one 15ltr bucket).

Ref

Description

Price

PGL 001

Q3 White 15ltr/20kg

£59.00

PGL 002

Removit 15kg

£69.00

Polytex Pro - Polytunnel Cleaner The green residue which maybe covering your polytunnel greatly reduces light transmission through your cover. This often originates from the leaves of nearby trees. Soapy water should NOT be used as this adversely reacts with the oil-based polymers which your polytunnel cover is made of.

BEFORE

AFTER

As the UK’s leading manufacturer of polytunnels we only recommend Polytex Pro, as this has been developed for safe and effective cleaning of polythene, plastics and uPVC (also ideal for conservatories and window frames). It gently yet effectively removes green slime, pesticides, soot, traffic film, grease, and chemical residues etc. Rates: Dilute at 1:10 with water for manual, machine or power hose applications. For best results rub with a soft broom or cloth etc. shortly after application. Coverage: 1ltr bottle will cover approx. 110m² (14ft x 45ft polytunnel) 5ltr bottle will cover approx. 550m² (two 21ft x 80ft polytunnels)

Please Note: All prices exclude VAT

Ref

Description

Price

PTP 100

Polytex Pro 1ltr

£10.85

PTP 500

Polytex Pro 5ltr

£41.65


44

Verritex Pro - Glasshouse Cleaner Verritex can be used in confined spaces as it does not give off fumes or odours during use, which makes it an ideal cleaner for the professional horticulturalist. Verritex achieves maxi mum ‘sparkle’ and ensures optimum light transmission, essential for healthy and efficient plant growth. Unlike acids it does not etch or damage the glass surface instead it efficiently removes all forms of soiling quickly and effectively. An alternative to using corro sive and aggressive chemicals such as hydrofluoric acid. With a pH of 9.8 Verritex it will not damage sensitive surfaces such as aluminium or magnesium alloys. Rates: To create an active solution dilute with water 1:50 Coverage: 8-12m² per litre of diluted product

Ref

Description

Price

VTP 100

Verritex Pro 1ltr

£9.15

VTP 500

Verritex Pro 5ltr

£33.30

Ref

Description

Price

HSP 100

Hortisept Pro 1ltr

£9.15

HSP 500

Hortisept Pro 5ltr

£33.30

Hortisept Pro - Horticultural Disinfectant Hortisept is a specifically formulated synergistic blend that is bactericidal, fungicidal and virucidal but user and environmentally sensitive. Hortisept does not contain alcohol, acid, aldehydes, chlorine, phenols or halogens, making it a safer alterna tive to aggressive or corrosive chemicals. Hortisept disinfects continuous ly, preventatively and repeatedly. Effectively controls a wide variety of pathogens on hard surfaces.

Advantages of Hortisept include: Broad spectrum disinfectant | Environmentally friendly | Pleasant odour | No re-entry restrictions for hard surface use | Cost effective use rates | Good wetting agent | Leaves bacteria resistant residue | Biodegradable Rates: Dilute with water 1:25 to make active solution

Algiclear Pro - Cleaner The active polymers in Algiclear affect the sustaining process of the algal cells. By creating a surface inhibiting the regeneration of the parasitic organisms – therefore preventing re-growth. Long term control of algae, moss, liverwort and lichens on any hard surface including: Walkways, pots, benches, roofs, fences, decking, terraces, tennis courts, walls, monuments and fountains. Application: Apply and walk away - no brushing, scrubbing or rinsing. Rates: To create an active solution dilute with water 1:20. Coverage: 8-12m² per litre of diluted product

Ref

Description

Price

ACP 100

Algiclear Pro 1ltr

£10.85

ACP 500

Algiclear Pro 5ltr

£41.65

PARTS FITTINGS AND SUNDRIES

Formulated with unique germicidal agents to provide control of disease spread ing organisms on all water safe horticultural surfaces. It contains a unique blend of compounds that create an enhanced antimicrobial spectrum. Hortisept therefore prevents microbes from growing and spreading in a way that is not harmful to the environment and will not affect plants or shrubs if ac cidental contamination occurs. For best results clean and remove all organic matter using Verritex or Polytex before disinfecting with Hortisept. Applications include: Hard surfaces/exteriors | Work areas and benches, pots, trays, matting, and flower buckets | Disinfection of cutting tools | Glasshouses and Polytunnels


45

Aluminium Rails And Posts Ali-Trap Polythene Fixing System

Single Ali-Rail

Double Ali-Rail

Single Ali-Box

Double Ali-Box

PVC Base Infill

PVC Top Infill

Available as a narrow rail (Ali-rail) or as a beefed-up box section (Ali-box). Both types come with either a single trapping channel or a double trapping channel. Extruded from aluminium with a ‘T’ slot at the rear. The Ali-rail ‘T’ slot takes the hexagonal head of a M8 bolt (or M8 nut), whilst the Ali-box takes M10. The plastic grip strips (in-fills) are universal, therefore compatible with the whole Ali-trap range. Ali-Trap - Uses: Single Ali-trap is mainly used for fixing polythene in to the gutters on a commercial polytunnel. Double Ali-rail is usually fixed over the top of the first and last hoop on a commercial polytunnel, allowing for a simpler, pleat free installation of the cover giving the structure a professional finish. Fittings are available to suit 50mm and 60mm OD hoops and are spaced every metre. Ali-Box - Uses: Single Ali-box is mostly used to make our aluminium doors, as a lightweight base rail or end frame. The main use for double Ali-box is for side rails, base rails and end frames on our commercial polytunnels.

Ref

Description

Price

ASE 592

Single Ali-Rail 5.9m Long

£35.87

ASJ 2

Single Ali-Rail Joiner

£3.01

ADE 592

Double Ali-Rail 5.9m Long

£50.62

ADJ 2

Double Ali-Rail Joiner

£3.59

ASE 591

Single Ali-Box 5.9m Long

£64.23

ASJ 1

Single Ali-Box Joiner

£5.98

ADE 591

Double Ali-Box 5.9m Long

£107.93

ADJ 1

Double Ali-Box Joiner 90°

£5.42

AJR 901

Double Ali-Box Joiner

£5.21

ITP 3

PVC Top Infill for Alibox and Alitrap 3m

£3.12

IBE 3

PVC Base Infill for Alibox and Alitrap 3m

£2.53

‘W-Wire’ (Wiggle Wire) Polythene Fixing System

PARTS FITTINGS AND SUNDRIES

Box Section

Polythene ‘C’ Rail

Netting ‘W - Wire’

Please Note: All prices exclude VAT

‘W-Wire’ has proven to be a lower-cost, effective way to secure polythene, netting and other materials to polytunnels etc. Multiple layers of polythene or shade fabrics can be fastened in to a single ‘C’ channel (up to three), each secured with a separate run of ‘W-Wire’.  The aluminium fixing rail is available as a simple lightweight rail incorporating a ‘C’ channel, or as a beefy aluminium box section, also incorporating a ‘C’ channel.  The same ‘W-Wire’ is used for both.   The lightweight ‘C’ rail is generally used to secure the polythene inside polytunnel gutters or can be screwed on to timber.  Its pliable aluminium nature enables it be attached over the curve of the polytunnel hoops allowing the polythene to be secured to the ends of your polytunnel.  50mm and 60mm hoop fittings can be supplied and would normally be positioned every meter.   The heavy duty aluminium box section is used for polytunnel side rails, base rails and end frames.  Box joiners/inserts are used to connect individual lengths together to form a long straight run.  The ‘T’ slot in the back of the box section takes an M8 hexagon bolt head allowing it to be fastened to polytunnel hoops using two M8 bolts with an exhaust clamp pressing.  Corner bracket are also available (phone for details).   Our ‘W-Wire’ is 2.3mm diameter (not the standard 2mm), and is both galvanised and plastic coated for longer life, making it 2.9mm diameter with the plastic coating.  Each length is 2m long, extending to 2.2m when clipped in to the ‘C’ channel. Ref

Description

Price

WWE 232 10

‘W-Wire’ Pack of 10

£13.55

WWE 232 100

‘W-Wire’ Pack of 100

£112.92

WWE 232 500

‘W-Wire’ Pack of 500

£451.67

WWA 6

Aluminium “W-Wire’ ‘C’ Rail - 6mtr Long

£15.76

WWB 060

Aluminium ‘W-Wire’ Box Section - 6mtr Long

£67.96

WWJ 1

Box Section Joiner / Insert

£7.50


46

Timber Timber For Base Rails, Side Rails, Lintels, Door casings and Upright Posts

All our timber comes from sustainable sources, and is pressure treated with a market leading preservative (HP-Wolmanit® CX-10). This preservative is based on copper and organic biocides and does not use chromium or arsenic, so is a low-hazard preservative that is safe to handle with a low environmental impact.  It protects against all forms of insect attack, wood destroying fungi and other biological decay hazards, according to EN 351-1 and meets hazard class 4 (HC4) which is for outside, in-ground use. Timber 75mm x 75mm (3” x 3”): Used for upright posts, door casings and lintels on commercial structures. Timber 100mm x 50mm (4” x 2”): Used for side rails and base rails on all commercial polytunnels. Application

Size

Price

TTR 711

Upright Posts, Door Casings and Lintels

75mm x 75mm x 2.75mtr (3” x 3” x 9ft)

£10.32

TTR 712

Upright Posts, Door Casings and Lintels

75mm x 75mm x 3.35mtr (3” x 3” x 11ft)

£12.30

TTR 713

Upright Posts, Door Casings and Lintels

75mm x 75mm x 4.8mtr (3” x 3” x 16ft)

£16.25

TTP 13

Side Rails and Base Rails

100mm x 50mm x 4.8mtr (4” x 2” x 16ft)

£15.05

Timber Battens, Nails and Bolts Timber Battens 50mm x 12mm: Used to secure your polythene on to timber side rails, base rails and doors frames. The 3mtr long battens are most commonly used on the side/base rails, whereas the 1mtr long battens are easier to use on shorter runs, such as around the door frames and on timber doors. Don’t forget to order nails, 1 nail for every 30cm (1ft) of batten. Ref

Description

Price

TTB 51

Timber Batten 50mm x 12mm x 1mtr

£0.69

TTB 53

Timber Batten 50mm x 12mm x 3mtr

£2.03

NGR 003

Galvanised Nails 50mm For Battens - Pack of 100

£1.06

Timber Battens 50mm x 25mm: Used for fixing polythene in to the gutters. The thicker batten spaces the polythene away from the gutter lip thus preventing the polythene from rubbing on the edge of the gutter. Don’t forget to order gutter bolts and nuts, 1 for every 60cm (2ft) of batten. Ref

Description

Price

TTB 57

Timber Batten 50mm x 25mm x 3.6mtr

£2.91

RBT 607

Roof Bolt For Gutter Battens - Pack of 100

£12.29

HNF 600

Hexagon Nut (Flanged) For Gutter Battens - Pack of 100

£2.84

PARTS FITTINGS AND SUNDRIES

Ref


47

Tapes Anti-Hotspot Tape

Anti-Hotspot Repair Tape

Padded foam tape which is placed over each polytunnel hoop prior to the polythene sheet being fitted.

Anti-hot spot tapes have a shiny polyester top layer which forms a low-friction barrier between the foam and your polytunnel cover.

PARTS FITTINGS AND SUNDRIES

It acts as insulation between the metal and the polythene to prevent the build-up of heat in the steel frame being This polyester layer can break down over time, which transferred to the polythene. significantly reduces the overall effectiveness of the tape. Rather than replace old anti-hot spot tape which is still in Extends the life of a polythene sheet by at least one year. good condition (and still in place) you can simply replace the outer layer by applying Anti-Hot Spot Repair Tape 20mm Tape: Used on hoops up-to 32mm diam. over your old anti-hot spot tape.  30mm Tape: Used on hoops 50mm and 60mm diam. 60mm Tape: Used for all end hoops. Make sure any of the loose polyester layer is removed first. Only use the repair tape on anti-hot spot tape Tape Roll Box Qty Ref Price / Roll which is in good condition (apart from having a damaged Width Length (For info only) polyester layer). AHS 209

20mm

9mtr

30

£2.37

AHS 309

30mm

9mtr

20

£3.54

Ref

Tape Width

Roll Length

Price

AHS 609

60mm

9mtr

10

£7.07

AHS 505

50mm (2”)

50mtr

£5.59

Polythene Joining Repair Tape

Gutter Tape / Mastic

Colour: Transparent Roll Length: 25m

Colour: Black Roll Width: 70mm (2¾”) Roll Length: 5m (16’5”) Highly adhesive and UV stabilized makes it resistant to weathering and the harmful effects from sunlight. This highly transparent, clear tape gives maximum light transmission.  Often used for making temporary repairs to glasshouse panes.

3mm thick gutter joining tape. Used to seal gutter joints. Produced from class A butyl mastic.

Ref

Roll Width

Roll length

Price

PRT 50

50mm (2”)

25mtr

£4.86

PRT 75

75mm (3”)

25mtr

£7.28

PRT 400

100mm (4”)

25mtr

£9.72

Ref

Tape Width

Roll Length

Price

PRT 600

150mm (6”)

25mtr

£14.56

GMC 505

70mm (2¾”)

5mtr

£18.14

Please Note: All prices exclude VAT


48

Side Vent Gearbox and Handle 8.5:1 for curtains up to 1.5m high 13:1 for curtains 1.5m high or above Complete with roller carriage for use with aluminium guide rail (below)

8.5:1

13:1

Side Vent Manual Gearbox

Ref

Size

Price

SVG 851

Gearbox c/w Roller Carriage 8.5:1

£97.18

SVG 131

Gearbox c/w Roller Carriage 13:1

£95.35

SVG 12

Gearbox Handle 1.2m

£15.86

SVG 16

Gearbox Handle 1.6m

£16.77

Wind-Up Curtain Winch

Wind Up Curtain Tube

Fits a 25mm vertical guide rail.

Adaptor: 26mm ID 36mm OD

Fits inside the sleeve of our side vent film on page 55. Swaged at one end (slots together).

Connection for 25mm OD pivoting telescopic arm. Ref

Description

Price

Ref

Description

Price

Ref

Size

Price

MWD 001

Manual Gearbox

£49.00

WIN 001

Winch

£35.10

CTD 510

19mm x 5.1mtr

£9.51

Aluminium Drive Tubes

Aluminium Guide Rail

Wind Up Curtain Cord

Size

Price

Ref

Size

Price

AGR 1

1m Long

£13.35

ADT 291

Drive Tube 2.95m

£39.50

AGR 15

1.5m Long

£18.72

ADT 590

Drive Tube 5.9m

£72.51

AGR 2

2m Long

£34.03

Ref

Size

Price

ADT 2

Drive Tube Joiner

£2.04

AGR 3

3m Long

£40.04

PCD04

4mm x 150m

£23.14

Bayco Monofilament

Wind-Up Curtain Cable & Wire Rope Grip

Cable sold per metre

Ref

Size

Price

BMF 251

2.5mm x 60m

£6.80

Webbing

Size: 14mm x 1.9mm Tension: 150kg

Ref

Description

Price

CWC 4

Cable 4mm

£0.89

Ref

Size

Price

WRG 400

Grip 5mm

£0.41

TFT 100

500m Reel

£19.95

PARTS FITTINGS AND SUNDRIES

Ref


49

POLYTUNNEL FITTINGS Hoop To Ridge Bracket

Base Rail Spacer

Ref

Fits Tube Size

Price

HTR 32

32mm / 32mm

£3.48

Ref

Fits Tube Size

Price

Ref

Fits Tube Size

Price

Ref

Fits Tube Size

Price

HTR 50

50mm / 50mm

£5.71

HTR 501

50mm / 50mm

£7.69

HTR 503

50mm / 50mm

£8.24

BRS 42

42mm

£2.40

£9.38

BRS 48

48mm

£3.04

HTR 60

60mm / 50mm

£6.08

Door Frame Bracket

Ref DFB 32

Fits Tube Size 32mm

HTR 601

60mm / 50mm

£7.92

Brace Bar Bracket (Keyhole)

HTR 602

60mm / 50mm

Mounting Bracket

Retro Rail Mounting Bracket (Side)

Price

Ref

Fits Tube Size

Price

£5.25

Ref

Fits Tube Size

Price

SCP 32

32mm

£4.07

32mm

£2.09

Ref

Fits Tube Size

Price

SCP 45

45mm

£4.40

DFB 45

45mm

£5.20

BBB 32

DFB 50

50mm

£6.02

BBB 502

50mm

£2.32

PCR 45

45mm

£2.55

SCP 50

50mm

£4.48

DFB 60

60mm

£6.53

BBB 602

60mm

£3.22

PCR 50

50mm

£2.59

SCP 60

60mm

£5.24

Rail Mounting Bracket (Side)

PARTS FITTINGS AND SUNDRIES

Hoop To Ridge Bracket Retrospective Fit

Hoop To Ridge Bracket with Tab

Rail Mounting Bracket (Corner)

Brace Bar Bracket (Inside Bolt)

Brace Bar Bracket (Side Bolt)

Ref

Fits Tube Size

Price

Ref

Fits Tube Size

Price

Ref

Fits Tube Size

Price

RMB 453

45mm

£6.25

RMB 454

45mm

£7.66

BBB 321

32mm

£3.40

Ref

Size

Price

RMB 503

50mm

£6.43

RMB 504

50mm

£8.95

BBB 501

50mm

£4.53

BBB 45

45mm

£3.71

RMB 603

60mm

£6.73

RMB 604

60mm

£10.19

BBB 601

60mm

£4.95

BBB 503

50mm

£4.53

Gutter Post To Hoop Bracket

Cross-Over Clamps

Mounting Bracket

90° 60°

Ref

Fits Tube Size

Price

GPT 501

50mm / 50mm / 50mm

£8.14

GPT 601

60mm / 50mm / 60mm

£9.00

HTR 321

32mm / 32mm

£4.52

Ref

Angle

Price

50mm / 50mm

£5.70

HTR 504

50mm / 32mm

£4.89

MBT 60

60°

£3.46

60mm / 50mm

£5.77

HTR 603

60mm / 32mm

£5.23

MBT 90

90°

£3.46

GPT 502 GPT 602

Please Note: All prices exclude VAT

Ref

Fits Hoop / Ridge

Price


Commercial Tensioning Plate

Exhaust Clamp Complete

Retrospective Rail Mounting Bracket (Corner)

50

Use in conjunction with exhaust clamp.

To be used in conjunction with an exhaust clamp and pipe collar.

Ref

Fits Tube Size

Price

ECC 32

32mm

£0.82

Ref

Fits Tube Size

Price

ECC 45

45mm

£1.01

Ref

Size

Price

TPE 504

50mm (See ECC50)

£2.51

ECC 50

50mm

£0.94

RMB 506

42mm / 50mm

£5.39

TPE 605

60mm (See ECC60)

£2.65

ECC 60

60mm

£1.17

RMB 602

60mm

£5.39

Double Ali-Trap Over Hoop Bracket

S Hooks

Spring Hooks For ‘C’ Channel

To fit pipe diameter 60mm Ref

Fits Tube Size

Price

DAO 50

50mm (See ECC50)

£3.28

Ref

Size

Price Per 100

Ref

Size

Price

DAO 60

60mm (See ECC60)

£3.39

SHK 50

60mm

£22.75

SHK 01

Pack of 10

£1.97

A simple to operate jack which raises the hoop on the ground tube, allowing the hoop to be locked in its raised position. This tensions the polythene cover to achieve a drum-skin tight finish.  Remember to loosen the locking collars and drop the hoops prior to fitting a new cover.

Ref

Size

Price

GWE 250

25mm x 675mtr

£59.00

Wire Strainer

Price

Galvanised Steel

£110.00 Ref

Size

Price

WTB 003

No. 3

£1.46

PARTS FITTINGS AND SUNDRIES

Polythene Tensioning Jack

Galvanised Straining Wire


51

Door Handle Aluminium

Door Handle Galvanised

Door Latch Kit

Ref

Description

Price

Ref

Description

Price

Ref

Description

Price

DHA 1

Ali Door Handle

£3.43

DHG 1

For Timber Doors

£3.28

DLK 1

Aluminium Latch Kit

£21.14

Strap and Pin Hinge (Pair)

Door Joiners

Door Bottom Guides Left Guide

Ref

Description

Price

Ref

Description

Price

Ref

Description

Price

DCJ 1

Corner Joiner

£2.29

DGR 1

Right Hand Guide

£6.75

SAP 1

One Pair (Two Hinges)

£10.92

DTJ 1

Tee Joiner

£2.37

DGL 1

Left Hand Guide

£6.75

Aluminium Sliding Door Track

Door Roller Carriage Pack

PARTS FITTINGS AND SUNDRIES

Right Guide

Each pack contains a pair of rollers for 1 single door

Long / Short Plate

Ref

Size

Price

SDT 18

1.8m Long

£30.93

Ref

Size

Price

SDT 275

2.75m Long

£44.70

SPL 70

70mm

£0.92

Ref

Description

Price

SDT 36

3.6m Long

£55.33

SPL 150

180mm

£3.60

DRC 3

Door Roller

£9.67

SDT 55

5.5m Long

£79.15

LPL 430

430mm

£7.90

Spring Omega Clips

Timber Nail Plate TNP1

Used to fasten polythene sheeting to steel tubes. Can be quickly removed, and re-attached.

TNP2 TNP3

Price Ref

Size

Price

TNP 1

Timber Nail Plate Flat

£1.19

£63.40

TNP 2

Timber Nail Plate Long 90°

£1.52

£66.66

TNP 3

Timber Nail Plate Short 90°

£1.52

Ref

Clip Diam.

Fits Tube Up to

10

100

500

SCS 35

30mm

35mm

£5.20

£39.00

SCS 40

35mm

40mm

£5.20

£39.00

Please Note: All prices exclude VAT


Hexagon Setscrew (25 pack)

Roof Bolt (25 pack)

Ref

Size

Price

Price

SAR 802

M8 x 50mm

£12.83

M10 x 60mm

£16.88

SAR 807

M8 x 80mm

£27.11

RBT 113

M10 x 80mm

£14.15

SAR 105

M10 x 75mm

£24.27

RBT 117

M10 x 100mm

£21.45

SAR 106

M10 x 80mm

£24.38

M10 x 100mm

£37.72

Ref

Size

Price

HSS 803

M8 x 25mm

£1.46

Ref

Size

HSS 101

M10 x 20mm

£3.78

RBT 109

HSS 102

M10 x 25mm

£2.96

HSS 104

M10 x 35mm

£3.58 £2.84

RBT 119

M10 x 120mm

£17.55

SAR 107

Galvanised Nails (Pack of 100)

RBT 121

M10 x 140mm

£18.98

Washers (25 pack)

HSS 107

M10 x 50mm

52

Sleeve Anchor (25 pack)

Tee Bolt (25 pack)

Ref

Size

Price

NGR 001

30mm

£0.37

NGR 002

40mm

£0.74

NGR 003

50mm

£1.06

NGR 004

65mm

£2.64

Button Head Screw (25 pack)

Size

Price

BHS 802

M8 x 20mm

£2.54

BHS 803

M8 x 25mm

£2.84

Size

Price

TBT 820

M8 x 20mm

£3.43

Ref

Size

Price

TBT 100

M10 x 25mm

£8.48

WZP 801

M8 Form A

£0.60

WZP 807

M8 Rubber Backed

£1.82

WZP 101

M10 Form A

£0.68

WZP 105

M10 x 38mm Mudguard

£2.71

Cable Ties (100 per pack)

Nuts (25 pack) Ref

Size

Price

CTS 120

4.7mm x 120mm

£1.99

CTS 200

4.8mm x 200mm

£6.51

CTS 370

7.5mm x 370mm

£23.71

CTS 430

9mm x 430mm

£35.10

Self Drill Screw (25 pack)

Coach Bolt (25 pack)

Nylock

Plain

Serrated

Ref

Description / Size

Price

HNN 800

Nylock M8

£1.27

HNN 100

Nylock M10

£2.03

HNN 120

Nylock M12

£2.19

HNP 800

Plain M8

£0.56

Ref

Size

Price

HNP 100

Plain M10

£1.14

SDS 551

5.5mm x 25mm

£1.67

HNP 120

Plain M12

£2.33

SDS 552

5.5mm x 38mm

£2.24

HNF 800

Serrated Flange M8

£1.37

5.5mm x 50mm

£2.37

HNF 100

Serrated Flange M10

£1.56

Ref

Size

Price

SDS 554

CBT 803

M8 x 40mm

£2.48

Pozi Woodscrew (25 pack)

CBT 105

M10 x 50mm

£5.17

Anti-Luce Fastener (each)

Galv Staples (25 pack)

Ref

Size

Price

PCW 803

8G x 1.5in

£0.59

Ref

Size

Price

PCW 102

10G x 1.25in

£0.75

Ref

Size

Price Each

SGD 301

30mm x 3.5mm

£0.59

PCW 104

10G x 2in

£1.07

ALF 121

M12 x 26mm

£1.10

PARTS FITTINGS AND SUNDRIES

Ref

Ref


53

Cross Bracing Bars (Crop Bars) 50mm tubular steel bracing bars (crop bars), sup port ed from the ridge tube by 32mm tubular steel hangers. Cross bracing bars, not only add strength to the structure but are also used for suspending irrigation spray lines, tying up crops such as tomatoes and vines, and for suspending hanging baskets. ‘V’ Hangers: Sufficient throughout most of the UK. ‘W’ Hangers: Used in more extreme locations on wider tunnels.

Size

Price

‘V’ Hanger Kit 18ft Polytunnel

£46.90

‘V’ Hanger Kit 21ft Polytunnel

£52.71

‘V’ Hanger Kit 24ft Polytunnel

£55.86

‘V’ Hanger Kit 27ft Polytunnel

£60.60

‘V’ Hanger Kit 30ft Polytunnel

£66.60

‘V’ Hanger Kit 21ft Multi-Span Polytunnel

£56.05

‘V’ Hanger Kit 26ft Multi-Span Polytunnel

£63.20

‘W’ Hanger Kit

POA

‘V’ Hanger Kit

‘W’ Hanger Kit

Hoops A Northern Polytunnel hoop is made in two halves, making it much stronger than some of our competi tors hoops that are supplied in 3,4 and even 5 pieces, cre ating weak links that need extra ‘bracing’. A North ern Polytunnels hoop does NOT need extra bracing.

PARTS FITTINGS AND SUNDRIES

14ft Hoops 32mm diameter tube with 1.5mm wall thickness with 0.95m straight sides.

18ft - 21ft Hoops 50.8mm diameter tube with 1.5mm wall thickness with 1.1m straight sides.

24ft - 30ft Hoops 60.3mm diameter tube with 1.5mm wall thickness with 1.2m straight sides.

Ref

Polytunnel Width

Plain / Swaged

Price

HHS 143

14ft Single Span

Half Hoop - Swaged

£16.13

HHP 143

14ft Single Span

Half Hoop - Plain

£14.83

HHS 185

18ft Single Span

Half Hoop - Swaged

£32.44

HHP 185

18ft Single Span

Half Hoop - Plain

£31.13

HHS 215

21ft Single Span

Half Hoop - Swaged

£34.89

HHP 215

21ft Single Span

Half Hoop - Plain

£33.59

HHS 246

24ft Single Span

Half Hoop - Swaged

£42.54

HHP 246

24ft Single Span

Half Hoop - Plain

£41.24

HHS 276

27ft Single Span

Half Hoop - Swaged

£44.92

HHP 276

27ft Single Span

Half Hoop - Plain

£43.61

HHS 306

30ft Single Span

Half Hoop - Swaged

£48.40

HHP 306

30ft Single Span

Half Hoop - Plain

£47.09

HHP 212

21ft Multi-Span

Half Hoop - Swaged

£37.82

HHP 211

21ft Multi-Span

Half Hoop - Plain

£36.52

HHS 266

26ft Multi-Span

Half Hoop - Swaged

£47.22

HHP 266

26ft Multi-Span

Half Hoop - Plain

£45.92

Ridge Tube Universal steel tube, available with plain ends or swaged at one end. 1.5mm wall thickness. Galvanised inside and out for longer life.

Ridge Tube Cap Please Note: All prices exclude VAT

Ref

Description

Price

EPG 308

32mm x 3.875mtr Steel Tube (Plain)

£9.71

EPG 314

32mm x 3.125mtr Steel Tube (Swaged)

£12.49

RPP 32

Plastic Ridge Tube Cap For 32mm Tube

£0.28

EPG 510

50mm x 5.9mtr Steel Tube (Plain)

£28.39

RTS 580

50mm x 5.9mtr Steel Tube (Swaged)

£30.63

RPP 50

Plastic Ridge Tube Cap For 50mm Tube

£0.56


54

Ground Tubes Screw Anchor Ground Tubes - 43mm and 49mm OD screw anchors are 120cm (4ft) long and are screwed 75cm (2’6”) in to the ground. The 27mm OD screw anchors are 90cm (3ft) long and screw 45-60cm (1’6”- 2’) into the ground.

GFT 34 GFT 144 GFT 154

GFT 141 GFT 151

GFT 145 GFT 156 GFT 147 GFT 157 GFT 342

GFP 34 GFP 142 GFP 152

GFP 141 GFP 151

GFP 143 GFP 153

Ground Tubes On Base Plates bolt down using sleeve anchors (see page 52).

All ground tubes are heavy duty galvanised finish with 3.25mm wall thickness.

Traditional Ground Tubes are 90cm (3ft) long and inserted 45cm in to the ground / concrete.

Traditional Ground Tubes Ref

To Fit

Description

Fixing Method

Price - Each

32mm Hoop

27mm OD Single Ground Tube

Concrete

£5.34

50mm Hoop

43mm OD Single Ground Tube

Concrete

£10.18

GFT 154

60mm Hoop

49mm OD Single Ground Tube

Concrete

£11.46

GCB 820

-

Concreting Bar (required for single ground tubes)

Concrete

£0.27

GFT 141

50mm Hoop / 50mm Gutter Post

43mm x 43mm OD Double Ground Tube

Concrete

£21.55

GFT 151

60mm Hoop / 50mm Gutter Post

49mm x 43mm OD Double Ground Tube

Concrete

£23.66

GFT 145

50mm Hoop / 50mm Gutter Post

43mm x 43mm x 43mm OD Triple Ground Tube

Concrete

£30.86

GFT 156

60mm Hoop / 50mm Gutter Post

49mm x 43mm x 49mm OD Triple Ground Tube

Concrete

£31.33

Ground Tubes on a Plate Ref

To Fit

Description

Fixing Method

Price - Each

GFP 34

32mm Hoop

27mm OD Single Ground Tube on Plate

Bolts

£10.09

GFP 142

50mm Hoop

43mm OD Single Ground Tube on Plate

Bolts

£26.80

GFP 152

60mm Hoop

49mm OD Single Ground Tube on Plate

Bolts

£27.52

GFP 141

50mm Hoop / 50mm Gutter Post

43mm x 43mm OD Double Ground Tube on Plate

Bolts

£37.01

GFP 151

60mm Hoop / 50mm Gutter Post

49mm x 43mm OD Double Ground Tube on Plate

Bolts

£37.73

GFP 143

50mm Hoop / 50mm Gutter Post

43mm x 43mm x 43mm OD Triple Ground Tube on Plate

Bolts

£48.31

GFP 153

60mm Hoop / 50mm Gutter Post

49mm x 43mm 49mm OD Triple Ground Tube on Plate

Bolts

£49.99

Screw Anchors Ref

To Fit

Description

Fixing Method

Price - Each

GFT 342

32mm Hoop

27mm OD Screw Anchor Ground Tube

Screw-In

£11.14

GFT 147

50mm Hoop

43mm OD Screw Anchor Ground Tube

Screw-In

£26.63

GFT 157

60mm Hoop

49mm OD Screw Anchor Ground Tube

Screw-In

£28.73

GFT 148

50mm Hoop

43mm OD Screw Anchor Extension - 45cm (18”) long

Slot & Bolt

£8.39

GFT 158

60mm Hoop

49mm OD Screw Anchor Extension - 45cm (18”) long

Slot & Bolt

£10.36

PARTS FITTINGS AND SUNDRIES

GFT 34 GFT 144


55

Side Vent Screen Fabric Woven translucent HDPE, coated both sides with polyethylene Much higher durability than polythene film Widely used on roll-down side vent screens and tunnel ends UV stabilised (UVI) Weight: 200g/m² Light Transmission: 70%                                    

Price Per Running Metre Ref

Width

1-24

25-49

50+

CML 2

2.0m

£8.64

£7.40

£6.17

CML 31

2.9m

£11.94

£10.24

£8.53

Wind-Up Side Vent Film Comes complete with a 50mm (2”) welded pocket/ seam to accommodate the steel curtain tube. 600g (150µm) thickness

NETTING, POLYTHENE AND FABRICS

UV stabilised for longer life

Price per Running Metre Ref

Sheet Width

Fold

1-24

25-49

50-74

75-99

100-124

125-149

150-174

175-200

PCC 21

1.95m

SWS*

£2.61

£2.50

£2.40

£2.31

£2.22

£2.14

£2.07

£2.00

Roll-Down Side Vent Film Comes as a plain 2m or 3m wide sheet (without pocket) for clipping on to your curtain tube. 600g (150µm) thickness UV stabilised for longer life Maximum roll length is 200m Clear Polythene

Price per Roll Ref

Width

Length

Fold

1

PCC 2A

2m

200m

SWS*

£276.00

Price per Running Metre Ref

Sheet Width

Fold

1-24

25-49

50-74

75-99

100-124

125-149

150-174

175-200

PCC 2

2m

SWS*

£1.89

£1.80

£1.71

£1.64

£1.57

£1.50

£1.44

£1.38

*SWS = Single Width Sheet (unfolded)   *CF = Centre Folded (Folded once before rolling)   *DF = Double Folded (Both sides folded in to the centre)

Please Note: All prices exclude VAT


56

Side Vent Netting with PVC Skirt

Clear PVC Skirt

1m net with a 50cm PVC skirt: Generally used for side rail to base rail vents on single bay polytunnels 1.5m net with a 50cm PVC skirt: Generally used for side rail to base rail vents on Multi-Span polytunnels without side gutters. 2m net with 1m PVC skirt: Generally use for gutter to base rail side vents. Make your own allowances depending upon your fixing method. The height of the skirting can be adjusted to your requirements when fitting. Clear PVC Skirt Ref

Net Height

PVC Height

PVC Colour

Price Per Metre

STN 2

1.5m

50cm

Clear

£4.84

STN 6

2m

1m

Clear

£6.79

Green PVC Skirt Ref

Net Height

PVC Height

PVC Colour

Price Per Metre

STN 4

1m

50cm

Green

£4.95

STN 3

1.5m

50cm

Green

£5.31

STN 5

2m

50cm

Green

£5.83

STN 7

2m

1m

Green

£7.73

NETTING, POLYTHENE AND FABRICS

Our side vent netting is fabricated from a 40-45% shade value, monofilament netting which has a PVC fabric skirting stitched along the base. This skirting prevents ground level draughts creeping through when the roll-down vent is in the closed position. Contains a UV inhibitor to prevent premature UV degradation.


57

Shade / Side Vent Netting

Knitted polyethylene monofilament UV stabilised (UVI) Colour: Dark Green Shade Value: 40%-45% Weight: 90g/m2

Full Rolls

Price per Roll

Ref

Roll Width

Roll Length

1

2-4

5+

SNG 100

1mtr

50m

£42.50

£39.31

£36.36

SNG 150

1.5mtr

50m

£60.00

£55.50

£51.34

SNG 200

2mtr

50m

£75.56

£69.89

£64.65

SNG 300

3mtr

50m

£107.37

£99.32

£91.87

NETTING, POLYTHENE AND FABRICS

Part Rolls

Price per Running Metre

Ref

Width

1-9

10-24

25+

SVN 100

1mtr

£1.70

£1.53

£1.38

SVN 150

1.5mtr

£2.28

£2.05

£1.85

SVN 200

2mtr

£2.72

£2.45

£2.20

SVN 300

3mtr

£3.65

£3.29

£2.96

Fabricated Net

Tailor-Made Netting Our in-house fabrication department can manufacture netting to almost any size and shape. We produce large net sheets from 3m wide rolls which are triple-stitched together using UV stabilized poly/cotton thread.  We can also hem the edges and insert brass eyelets if required. We use a knitted polypropylene monofilament netting with a 40-45% shade value, dark-green in colour and UV stabilized.  Other materials available – phone for a quote. Please Note: All prices exclude VAT

Price 1-99m £1.30

2

100-199m

200-399m2

400m2+

£1.10

£1.00

£0.90

2


58

Knitted Anti-Bird Netting

Anti-Hail / Butterfly Netting

UV stabilised (UVI) knitted polyethylene monofilament (HDPE) Flexible and manoeuvrable 8m and 20m wide has 20mm x 20mm mesh 4m, 6m and 12m wide has 25mm x 25mm mesh Weight: 30g/m2

Prevents bloom and blossom damage by hail UV stabilised (UVI) polyethylene monofilament Flexible and manoeuvrable Mesh size 4mm x 5mm Weight: 70g/m2 (less than 30% shading)

ACTUAL SIZE 25mm x 25mm

Ref

Width

Roll Length

Price

FCT 4

4m

100m

£88.00

FCT 6

6m

100m

£118.00

FCT 8

8m

100m

£146.00

FCT 12

12m

100m

£203.00

FCT 20

20m

100m

£314.00

ACTUAL SIZE

Price per Metre

Often used as anti-butterfly netting.

Ref

Width

1-19

20-49

50-99

FCT 41

4m

£1.76

£1.54

£1.32

FCT 61

6m

£2.36

£2.07

£1.77

FCT 81

8m

£2.93

£2.57

£2.20

FCT 121

12m

£4.06

£3.55

£3.05

Ref

Width

Roll Length

Price

FCT 201

20m

£6.29

£5.50

£4.71

AHN 400

4m

100m

£199.00

Anti-Insect Mesh

Rigid and high strength UV stabilised (UVI) and rot proof Colour: Black Mesh Size 18mm x 18mm Weight:80g/m2

UV Stabilised (UVI) woven polyethylene monofilament Mesh: 0.23mm x 0.23mm (whitefly, thrips) or 0.72mm x 0.72mm (carrot root fly, cabbage fly). Flexible and manoeuvrable Rot Proof

ACTUAL SIZE

Ref

Width

Roll Length

Price

FCS21

2m

200m

£199.00

Price per Metre

Ref

Mesh Size

Width

Roll Length

Price

ING 22

0.23 x 0.23mm

3m

100m

£373.00

ING 08

0.72 x 0.72mm

3m

100m

£213.00

Price Per Metre Ref

Mesh Size

Width

1-19

20-49

50-99

Ref

Width

1-19

20-49

50-99

ING 221

0.23mm x 0.23mm

3m

£5.98

£5.44

£4.94

FCS 2

2m

£2.00

£1.75

£1.50

ING 081

0.72mm x 0.72mm

3m

£3.41

£3.10

£2.82

NETTING, POLYTHENE AND FABRICS

Extruded Anti-Bird Netting


59

Super Strength Windbreak With a tensile strength of 30kN/m, this windbreak is one of the strongest available and will protect from gale force winds. Manufactured in 1m width, this netting can be erected in successive layers as a high level windbreak for the protection of large areas of crops or glasshouses. Mesh size: 50mm x 20mm Colour: Green High Tensile Strength maintenance free Easy to install UV stabilised Life Span: 4 years + ACTUAL SIZE

Ref

Description

Price

SWK 130

Super Strength Windbreak 1mtr x 30mtr roll

£183.00

NETTING, POLYTHENE AND FABRICS

Low Cost Windbreak

Mesh size: 15mm x 5mm Colour: Green Weight: 300g/m² Wind reduction: 60% (approx.) UV stabilised Install using a tensioned top wire to maintain a taught top edge. Base and mid wires also advised. 2m high also available on request. ACTUAL SIZE

Ref

Description

Price

LWK 130

Low Cost Windbreak 1mtr x 30mtr roll

£76.50

Paraweb

High impact and tensile strength Does not corrode or rot Unaffected by salt water Virtually maintenance free Excellent UV resistance It is recommended that you install using the correct staples Colour: Black (Green available on request - approx. 10% extra cost) NOTE: One pack of staples required per 2m x 30m roll

Please Note: All prices exclude VAT

Ref

Description

Price

PWB 130

Paraweb Windbreak 1mtr x 30mtr Roll

£185.00

PWB 230

Paraweb Windbreak 2mtr x 30mtr Roll

£350.00

PWS 220

Paraweb Staples - Pack of 220

£39.00


60

Ground Cover Fabric (Weed Control Fabric) Colour: Black with green grid lines Weight: 100gr/m² Light Transmission: Less than 5% Water Permeability: 15ltr/m²/second (EN ISO 11058) Grid Lines: 25cm x 25cm for accurate plant spacing

Woven polypropylene fabric for effective weed control.

All rolls are single wound sheets (unfolded).

UV stabilised for long life   Price Per 100m Roll

Price Per metre

Ref

Width

1

2-4

5-9

10+

Ref

Width

Price

GCF 100

1mtr wide

£43.70

£40.00

£37.00

£34.30

GCF 101

1mtr wide

£0.70

GCF 130

1.3mtr wide

£56.80

£52.00

£48.00

£44.60

GCF 131

1.3mtr wide

£0.90

GCF 200

2mtr wide

£87.30

£80.00

£73.90

£68.60

GCF 201

2mtr wide

£1.40

GCF 330

3.3mtr wide

£132.00

£121.90

£113.20

£105.60

GCF 331

3.3mtr wide

£2.00

GCF 400

4mtr wide

£160.00

£147.70

£137.20

£128.00

GCF 401

4mtr wide

£2.40

GCF 530

5.3mtr wide

£212.00

£195.70

£181.80

£169.60

GCF 531

5.3mtr wide

£3.20

White Co-Extruded Polythene (Black-Out Poly)

Price Ref

Size

Thickness

Fold

1-4

5-9

10+

BWP 140

1.4m x 500m

85µm (320g)

*SWF

£179.00

£169.00

£159.00

BWP 183

1.83m x 150m

85µm (320g)

*CF

£129.00

£124.00

£119.00

BWP 200

2m x 150m

85µm (320g)

*CF

£145.00

£135.00

£125.00

Ground Pegs

Ground Staples Pack Quantity 100

Pack Quantity 100

Polypropylene pegs for securing ground fabrics and fleece. Head Diameter: 3cm

Ref

Description

Price Per 100

GSS 46

100mm x 150mm (4” x 6”)

£15.00

Ref

Length

Price Per 100

GSS 49

100mm x 175mm (4” x 9”)

£19.85

GCP 71

15cm (6in)

£6.75

*SWS = Single Width Sheet (unfolded)   *CF = Centre Folded (Folded once before rolling)   *DF = Double Folded (Both sides folded in to the centre)

NETTING, POLYTHENE AND FABRICS

Co-extruded floor film. The white upper layer reflects light back to your crop.  The black under layer prevents the passage of light, therefore acting as a weed suppressant.  Widely used as a greenhouse floor film for crops such as tomatoes and cucumbers, also used in outdoor strawberry production.


61

White Floor Polythene

White polythene film UV stabilised for longer life. Commonly used as a floor covering. Width: 3.6m Roll Length: 300m Thickness: 70µm (280g) Fold: *DF

Price Per Roll Ref

Width

Roll Length

Thickness

Fold

1-4

5-9

10+

WFP 360

3.6m

300m

70µm (280g)

*DF

£210.00

£196.00

£183.00

Cloche Film This 150g clear polythene provides protection for your crops in the early season. A very economical way to protect your crops against the elements and it also helps with the warming of the soil, therefore crops can be harvested earlier and higher yields can be achieved.

NETTING, POLYTHENE AND FABRICS

Thickness: 38µm (150g)

Per Roll Ref

Width

Roll Length

Fold

1

2-5

6+

CCP 185

1.85m

200m

*SWS

£69.40

£63.60

£58.70

CCP 275

2.75m

200m

*CF

£87.40

£81.10

£75.70

CCP 370

3.7m

100m

*CF

£69.40

£63.60

£58.70

CCP 400

4m

300m

*CF

£214.90

£197.00

£181.80

Propagation Film Used to cover seed beds during sprouting and propagation. Clear: More commonly used in lower light conditions (early season). White: Often used to provide shade. Thickness: 20µm (80g) White Propagation Film Ref

Width

Roll Length

Fold

1

2-4

5+

PFW 162

1.6m

250m

*SWS

£52.00

£47.27

£43.33

PFW 361

3.6m

100m

*CF

£50.00

£45.45

£41.67

PFW 362

3.6m

250m

*CF

£98.00

£89.09

£81.67

Clear Propagation Film PFC 201

2.0m

100m

*CF

£36.00

£32.73

£30.00

PFC 361

3.6m

100m

*CF

£54.00

£49.09

£45.00

PFC 401

4.0m

100m

*CF

£80.00

£72.73

£66.67

*SWS = Single Width Sheet (unfolded)   *CF = Centre Folded (Folded once before rolling)   *DF = Double Folded (Both sides folded in to the centre)

Please Note: All prices exclude VAT


62

Clear UVI Film Clear UV stabilised polythene. Thickness: 125µm (500g)

Per Roll Ref

Description

Thickness

Fold

1

2-5

6+

CUP 185

1.85m x 100m

125µm (500g)

*SWS

£96.30

£89.40

£83.50

CUP 370

3.7m x 50m

125µm (500g)

*CF

£96.30

£89.40

£83.50

Tear Resistant Reinforced Polythene (Monarflex)

12mm x 12mm grid pattern reinforcing thread Colour: Clear with internal green thread Light Transmission: 85%-90% Thickness: 1000g (250µm)

ACTUAL SIZE

Ref

Width

Length

Price Per Metre

MRP 200

2m

Per metre

£9.70

Ref

Width

Length

Price Per Roll

MRP 201

2m

25m

£189.00

Clip this large bubble insulating film to the insides of your polytunnel or greenhouse to protect your crops in cooler temperatures. 30mm (1.2”) Bubbles High clarity light transmission UV stabilised for long life 3 ply (double skin) Polytunnel fixings below

ACTUAL SIZE

Prices Ref

Description

1-4

5-9

10+

BFM 755

75cm x 50m

£35.60

£31.56

£28.40

BFM 125

1.2mtr x 50m

£50.51

£45.46

£41.33

BFM 155

1.5mtr x 50m

£56.82

£51.65

£47.35

BFM 245

2.4mtr x 50m

£82.64

£75.75

£69.92

Screen / Insulation Fitting Kit The Screen / Insulation fitting kit is the ideal low cost solution to fitting a winter insulation or netting to your polytunnel. The kit comprises of 3 parts that are very simple to use. (Please note bubble film is NOT included)

Ref

Description

Price

SIF 32

Kit to fit 32mm steel (hoops)

£0.32

SIF 506

Kit to fit 50mm and 60mm steel (hoops)

£0.36

*SWS = Single Width Sheet (unfolded)   *CF = Centre Folded (folded once before rolling)   *DF = Double Folded (both sides folded in to the centre)

NETTING, POLYTHENE AND FABRICS

Insulation Bubble Film


63

Thermal / Energy Screens

Screens are used more and more in greenhouses. They can limit the loss of energy, provide a more even climate in the greenhouse, reflect excess sunlight or even darken the greenhouse. We divide screens into the following categories...

NETTING, POLYTHENE AND FABRICS

Energy Saving Screens Shading Screens Combined Shading & Energy Saving Screens Light Diffusing Screens Assimilation and Black-Out Screens Vertical Screens

In single screen greenhouses the combined shading & energy saving screens (PH44 FP-PH77 FP & PhormiTex 44-77) are ideal for shading in summer and energy saving in winter. As a consequence of advanced automation and the use of assimilation lighting, the risk of fire in greenhouses has increased significantly.  If a greenhouse fire is able to spread via the screen, the consequences can be serious.  This is why Bonar Technical Fabrics has developed a totally new range of flame retardant screens under the name PhormiTex.  PhormiTex screens combine already proven screen qualities with a certified fire retardancy. Bonar PH screens (PH44 FP-PH77 FP) have a basic fire retardancy but do NOT carry a British or EU standard.   Available in a range of standard widths, although any bay width can be catered for. 6 year European-wide guarantee against UV degradation. Low shrinkage - Less than 1% material shrinkage.   Prices vary depending on quantity and current exchange rates. Please phone for a quote. Samples and specification sheets available on request.   We can offer the full range of Bonar TF screens.  Below is a list of typical screens being used for the UK climate. Energy Saving Screens Name

Colour

Light Transmission

Energy Saving

Shading

Flame Retardant

Available Roll Widths

Prices From m2

PhormiTex Clear

Translucent

89%

47%

11%

Yes

3.25, 4.30, 4.80 & 5.30m

POA

PhormiTex Bright

Translucent

87%

47%

13%

Yes

3.25, 4.30, 4.80 & 5.30m

POA

PhormiTex Super

Translucent

85%

47%

15%

Yes

3.25, 4.30, 4.80 & 5.30m

POA

Energy Saving and Shade Screens PH 44 FP

Translucent / Foil

55%

52%

45%

No

3.25, 4.30, 4.80 & 5.30m

POA

PH 55 FP

Translucent / Foil

45%

58%

55%

No

3.25, 4.30, 4.80 & 5.30m

POA

PH 66 FP

Translucent / Foil

35%

63%

65%

No

3.25, 4.30, 4.80 & 5.30m

POA

PH 77 FP

Translucent / Foil

25%

68%

75%

No

3.25, 4.30, 4.80 & 5.30m

POA

PhormiTex 44

Translucent / Foil

55%

50%

45%

Yes

3.25, 4.25, 4.75 & 5.25m

POA

PhormiTex 55

Translucent / Foil

45%

55%

55%

Yes

3.25, 4.25, 4.75 & 5.25m

POA

PhormiTex 66

Translucent / Foil

35%

61%

65%

Yes

3.25, 4.25, 4.75 & 5.25m

POA

PhormiTex 77

Translucent / Foil

25%

63%

75%

Yes

3.25, 4.25, 4.75 & 5.25m

POA

Please Note: All prices exclude VAT


Shade Screening

64

As well as installing thermal and energy screens in our multi-span polytunnels, we can also fit retractable screens in our single span structures.

These particular shade screens are opened and closed by a pull cord. Each individual screen can be operated independently, or they can all opened and closed together by pulling a master cord at the end.   This kind of system can also be operated with a  drive tube and motor.  If linked to a control panel and sensor switch (thermostat, lux switch etc.) then it can be made fully automatic.

Watch online - Thermal Screen northernpolytunnels.co.uk/thermal-screen

NETTING, POLYTHENE AND FABRICS

Due to the lower sides and curvature of single span polytunnels, we devised this retractable screen which follows the contour of your structure. This gives maximum screen coverage with the least loss of headroom.  We can use different screening materials, not just shade net as shown.   These screening systems can be supplied as an option with our new polytunnels, or retrospectively fitted to existing structures


65

Benching Heavy Duty Static Benching

PATHWAYS AND BENCHING

Width Length

0.5m - 1m

1.1m - 1.5m

1.51m - 2m

5m

£612.50

£630.00

£646.25

6m

£692.50

£712.50

£731.25

7m

£772.50

£795.00

£816.25

8m

£851.25

£876.25

£902.50

9m

£861.25

£886.25

£911.25

Fully galvanised steel bench with a galvanised mesh top. Mesh Size: 75mm x 25mm (3” x 1”) - Other mesh sizes available.

10m

£931.25

£958.75

£987.50

11m

£1,011.25

£1,041.25

£1,072.50

12m

£1,090.00

£1,123.75

£1,157.50

Very strong and robust.

13m

£1,170.00

£1,206.25

£1,242.50

14m

£1,180.00

£1,216.25

£1,252.50

15m

£1,250.00

£1,288.75

£1327.50

16m

£1,328.75

£1,371.25

£1,412.50

Adjustable threaded feet allow for easy levelling on uneven ground.

17m

£1,408.75

£1,453.75

£1497.50

18m

£1,488.75

£1,536.25

£1,583.75

Ideal working height adjustable between 80cm-90cm (2ft 8in to 3ft).

19m

£1,497.50

£1,545.00

£1,592.50

20m

£1,567.50

£1,618.75

£1,668.75

The bench has inward folded raised edges and mitred corners to prevent injuries.

Fully modular system allowing you to extend your benches (or reduce them) at a future date. Simple self-assembly. Manufactured to your specific size requirements – phone our sales team for advice. Optional choice of tops (by quotation) – flood trays, heated mats, difference size mesh tops.   Please Note: All prices exclude VAT

The prices shown are for the complete bench. These are our single bench prices. For multiple benches please request a quotation. Delivery is free of charge to most mainland UK postcode areas. If delivery is to an offshore address or to the Scottish Highlands then please request a quote. As these benches are made to order, so please allow 4 weeks for delivery.


66

Rolling Benches

Built to order in sizes which will maximise the available space from 0.9m to 2m wide. Hot dip galvanised Base plate or ground tube fixings Optional adjustable legs Wire mesh, ebb and flood or polystyrene/ heat mat tops. Call for a quote

Heavy-Duty Potting Benches These heavy-duty potting benches have a fully welded, hot dipped galvanised steel frame with aluminium deck (top, sides and back).

Feet and Castors The 2.4mtr long benches are supplied with adjustable plate feet or heavy duty castors. Castors are 16cm diameter - there are two fixed castors and two that swivel with brakes. The 1.2mtr long benches are only available with plate feet.   Lower Shelf Height: 32cm Potting Shelf Height: 95cm Height Between The Shelves: 62cm Overall Height: 1.36mtr  These are usually made to order, so please allow 4 weeks for delivery.  Supplied fully assembled.   Quantity discounts available. Free delivery to most mainland UK address’s. Please phone for a quote stating your postcode.

Ref

Size

Wheels

Price

BEN 005

1.2m Long x 1.5m Wide

No

£339.00

BEN 006

2.4m Long x 1.0m Wide

No

£919.00

BEN 002

2.4m Long x 1.0m Wide

Yes

£979.00

PATHWAYS AND BENCHING

Sizes Two sizes, 1.2mtr or 2.4mtr long. The 1.2mtr long bench is 0.5mtr wide and the 2.4mtr benches are 1mtr wide.


67

Danish Trolley Tracking and Walkways

Danish Trolley Tracking

PATHWAYS AND BENCHING

Features Sections interlock (end to end). Can be used as a permanent or temporary track. Easy to lay and move. Makes trolley movement smooth and quiet. Anti-slip surface in the centre of the track. Heavy duty and long lasting (18kg per section). Made from recycled plastics. Supplied in 1.2m x 0.54m interlocking lengths. 50 tracks per pallet (for info only).

To create a turning circle see our PVC paving on the next page. Installation Temporary Track Make sure surface is flat and even. When laying long lengths leave a 3mm gap in-between tracks. Permanent Track Make sure surface is flat and even. Lay woven polypropylene ground cover. Apply 20-30mm of fine split gravel. Leave 3mm gap between tracks. Getting trolleys on and off the track is made easier by using our ramps. We recommend not laying or moving the track in freezing weather conditions. Ref

Description

1-24

25-49

50-99

100+

DTT 01

Danish Trolley Tracking 1.2m x 0.54m

£17.79

£16.43

£15.25

£14.24

DTT 02

Danish Trolley Tacking Upper Ramp 54cm Wide

£5.90

£4.90

£4.90

£4.90

DTT 03

Danish Trolley Tacking Lower Ramp 54cm Wide

£5.90

£4.90

£4.90

£4.90

Please Note: All prices exclude VAT


68

PVC Paving Sections

Size: 120cm x 80cm x 2cm Weight: 20kg per piece Ramps: 40cm wide Colour: Black Pallet Qty: 50 paving sections/pallet (for information only) Advantages: Can be driven over by car. A pimpled closed surface. Can be inter-linked on all sides.

Upper and Lower Ramp

These can also interlock with Danish trolley tracking to create the extra width required for corners, bends and turning circles. Use PVC Paving To Create a Turning Circle

40cm wide, interlocking ramps are used to allow smooth trolley access, and to prevent pedestrians from tipping as they step on the walkway. Two ramps are required at each end for an 80cm wide pathway. Upper ramps are required for one end whilst lower ramps will be needed for the opposite end. Three ramps would be required along each 1.2m edge. If creating a large area e.g. 12m x 12m, and you require ramps along all four sides, then you would require 60 upper ramps and 60 lower ramps (and 150 paving sections).

Ref

Description

1-24

25-49

50-99

100+

PPW 01

PVC Paving/Walkway 1.2m x 0.8m

£19.69

£18.17

£16.88

£15.75

PPW 02

PVC Paving Upper Ramp 40cm Wide

£4.90

£3.90

£3.90

£3.90

PPW 03

PVC Paving Lower Ramp 40cm Wide

£4.90

£3.90

£3.90

£3.90

PATHWAYS AND BENCHING

These heavy duty PVC paving sections can be interlocked length ways to create a 80cm wide path, or sideways to create a 1.2mtr wide path. They can even be interlocked in a grid formation (both, end to end and side by side) to cover a large open area.


69

Rack and Pinion Parts

HEATING, LIGHTING, VENTILATION AND CLIMATE

Curved Rack (Inwards) Rack and pinion ventilation system. Can be supplied as a complete system, either for a new polytunnel or as an upgrade to an existing structure (phone for details).  Also available: torque tubes, bearing grease, 24vDC motors, manual gear boxes, mounting brackets etc. Curved Rack (Inwards) Made from 3mm galvanised pressed steel.  22mm high x 1050mm length. Ref

Description

Price

RCK 02

Curved Rack 22mm x 1050mm (each)

£5.90

Bearing Bracket (Plate)

Sash Brackets (Window Connector)

Zinc plated, with a self-lubricating bronze bearing to support a 1” (OD) drive shaft (torque tube). Various additional extensions and brackets available.

To connect the rack on to the louvre/window. Supplied complete with stainless steel pivot bolt and split pin.

Ref

Description

Price

Ref

Description

Price

BBK 01

Bearing Bracket with 1” Bronze Insert

£2.95

SBS 01

Sash Bracket c/w Stainless Pin and ‘R’ Clip

£1.45

Pinion

Electric Motor Gearboxes (Three Phase)

Galvanised steel housing with a self-lubricating bronze bearing for a 1” (33.7mm OD) drive shaft (torque tube).

Heavy duty motors with a variety of applications. Supplied with two output shafts and chain couplings.

Ref

Description

Price

Ref

Description

Price

PIN 02

1” Galvanised Pinion c/w Bronze Bearing (each)

£8.90

WGM 01

Gear Motor 380v 0.55kW 400Nm 2.6rpm

£590.00

Please Note: All prices exclude VAT


70

Automatic Vent Control System At Northern Polytunnels we have brought together selected components to allow you the full automation of your side ventilation systems.

240v Mains

Inside Temperature Vent Controller

There is a simple swap from your existing manual gearbox to the new 24vDC reversing motor and then you will need a control panel (SVA01) to operate the motor and the automatic vent controller (SVA05) for automatic operation.

Outside Temperature Emergency Overide

Signal

24vDC

240v Mains Driver Unit

Driver Unit

Each driver unit (SVA01) can control two motors and the automatic vent controller (SVA05) can control multiple driver units.

Driver Unit

24vDC

24vDC

Polytunnel Vent Motor (SVA07)

Supplied with 26mm ID/36mm OD coupler to suit a range of drive tubes, but we can make adaptors for other sizes (call for details). Roller guide carriage available for use on a 32mm 35mm OD vertical guide rail, or alternatively it can be used on a pivoting telescopic arm. Application: Sidewall ventilation, roof ventilation and screening motor.

Roller Guide Carriage

Bare Drive Shaft Diam: 16mm OD. Drive Shaft Coupling: 26mm ID / 36mm OD. Electrical Input: 24vDC +/- 10%. Max. Current: 3.5A (84W). RPM: 3.3. Torque: 60Nm. Weight: 2.4Kg. Limit Range: 1-35 revolutions. Wire: 2 core 1.25mm.

Automatic Vent Controller (SVA05)

Motor Driver Unit (SVA01)

This micro-computer has three inputs, enabling it to make decisions based on the greenhouse air temperature, outside air temperature (or rainfall with an optional rain sensor), and an emergency high temperature sensor. Under normal operation you would set the desired greenhouse temperature. When the temperature exceeds this the vents start to open in increments. A ‘waiting time’ can be programmed between the increments allowing the temperature to stabilise before further operation. Likewise, when the greenhouse temperature starts to fall below the desired temperature, the same happens in reverse as the vents close. A buffer can be set, of say 3°C of the desired temperature, where operation is delayed until further fluctuations occur. In the event of a sensor failure, an ‘emergency’ high temperature sensor will command the vents. An outside temperature sensor (supplied) or rain sensor (optional extra) can also be used to make ventilation decisions. The temperature set point and current temperature are permanently displayed. Proportional control across the full temperature range of +5 to +45°C. Unit Includes: Inside temperature sensor Outside temperature sensor Emergency high temperature sensor Connection box for signal driver unit / control panel

Ref

This control panel can operate up to two 24vDC vent motors, either independently or together. Switch control for forward and reverse operation when in manual mode.  The automatic function can be switched on if an automatic vent controller is connected, allowing fully automatic operation of your vents. Each driver unit operates 1 or 2 vent motors.   Power Input: 240v (single phase) Power Output: 2 x 24vDC Description

Price

SVA 05

Automatic Vent Controller

£299.00

SVA 01

240vAC / 24vDC Motor Driver Unit (Control Panel)

£199.00

SVA 07

24vDC Polytunnel Vent Motor

£139.00

SVA 08

Roller Guide Carriage For 32mm - 35mm Tube

£62.00

HEATING, LIGHTING, VENTILATION AND CLIMATE

This motorised vent winder is 24vDC driven geared motor with in-built limit switch, and can be used for manual or automatic operation. Forward and reverse operation from 1-35 revolutions.


71

Exhaust / Ventilation Fans

HEATING, LIGHTING, VENTILATION AND CLIMATE

These belt drive fans are specifically designed to ventilate larger buildings, glasshouses or polytunnels, where substantial amounts of air are moved at low pressure with minimal energy consumption. Ideal for extracting stale or humid air from large greenhouses/tunnels.  Usually used in conjunction with air intake louvres (see below). IP55 Protection Galvanised steel housing Stainless steel impeller Mesh safety guard on both sides Low noise Low vibration Fitted with back-draft shutter Polytunnel fixing kits available, please call for details. PVC covers available for winter heating. Single-Phase

Price (each)

Ref

Max Air Flow

Phase

Power

Current

Fan Size

Overall Size

1

2-4

5+

BDF 01

16,500m3/hr

230v

750W

4.5A

0.80m

0.96 x 0.96 x 0.33m

£510.00

£471.75

£436.37

BDF 02

25,500m3/hr

230v

750W

5.4A

1.0m

1.15 x 1.15 x 0.33m

£565.00

£522.63

£483.43

BDF 03

39,600m3/hr

230v

1,100W

7.2A

1.25m

1.38 x 1.38 x 0.33m

£680.00

£629.00

£581.83

Three-Phase

Price (each)

Ref

Max Air Flow

Phase

Power

Current

Fan Dia.

Overall Size

1

2-4

5+

BDF 06

16,500m3/hr

400v

750W

2.0A

0.80m

0.96 x 0.96 x 0.33m

£510.00

£471.75

£436.37

BDF 07

25,500m3/hr

400v

750W

2.6A

1.0m

1.15 x 1.15 x 0.33m

£565.00

£522.63

£483.43

BDF 08

39,600m3/hr

400v

1,100W

2.89A

1.25m

1.38 x 1.38 x 0.33m

£680.00

£629.00

£581.83

BDF 09

43,500m3/hr

400v

1,500W

3.2A

1.25m

1.38 x 1.38 x 0.33m

£730.00

£675.25

£624.60

Air Intake Louvres Used in conjunction with our belt driven exhaust fans (see above). Externally fixed Fitted with bird guard Material: Aluminium with mill finish

\] Air Intake Louvres

Please Note: All prices exclude VAT

Price (each)

Ref

Louvre Size

For Fan Size

1

2-4

5+

AIL 100

1.0m

0.8m

£213.00

£197.03

£182.25

AIL 125

1.25m

1.0m

£312.00

£288.60

£266.96

AIL 140

1.4m

1.25m

£352.00

£325.60

£301.18


72

Polytunnel Roof Extraction Fan

Designed to exhaust excessive heat from polythene clad greenhouses. Usually used with a temperature switch and control panel. Simply cut out a 30-35cm hole in your polytunnel cover, insert the fan from the inside in a rotating motion, and clip on to the support bars. Cowl (lid) drops back down when not in operation.

Weight: 7.5kg Top diameter at cowl: 42cm Overall diameter at base: 57cm Overall height: 39cm Air flow: 4,600m³/hr (2,700cfm) Power Supply: Requires single phase 220-240v Motor: 200w (0.9A) Protection: IP55 | Comes with a mesh guard on the inlet

Watch Roof Fan Video northernpolytunnels.co.uk/fan Price Ref

Description

1-4

5-9

10-19

20+

PRF 01

Polytunnel Extraction Fan

£195.00

£185.00

£175.00

£165.00

FCP 01

Control Panel For Automatic Operation

£179.00

-

-

-

EWT 001

Temperature Switch With Sensor

£139.00

-

-

-

SBK 32

Support Bar Kit for 32mm Diam. Hoop

£39.00

-

-

-

SBK 50

Support Bar Kit for 50mm Diam. Hoop

£39.00

-

-

-

SBK 60

Support Bar Kit for 60mm Diam. Hoop

£39.00

-

-

-

HEATING, LIGHTING, VENTILATION AND CLIMATE

WINNER Best Professional Equipment 2015


HEATING, LIGHTING, VENTILATION AND CLIMATE

73

Polytunnel Roof Vent

Easy to install roof vent, with simple pull-cord operation. Used to release excessive heat build-up in your polytunnel without having to open the doors. The spring closing design allows it to be closed tight shut when ventilation is not required. Useful in longer polytunnels where heat can build-up in the middle, or when the door needs to be shut. Simply cut out a 30-35cm hole in your polytunnel cover, insert the fan from the inside in a rotating motion, and clip on to the support bars. Weight: 2.3kg Top Outlet Dim. 41cm Base Inlet Diam. 48cm Overall Width: 53cm Height: 28cm

Ref

Description

Price

PRV 01

Polytunnel Roof Vent

£49.00

SBK 32

Support Bar Kit for 32mm Hoop Diam.

£39.00

SBK 50

Support Bar Kit for 50mm Hoop Diam.

£39.00

SBK 60

Support Bar Kit for 60mm Hoop Diam.

£39.00

Air Circulation Fan

Variable Fan Speed Control

Galvanised and powder coated for longer life. The aluminium blade supplies a big air flow up to 45m distance.

Simply loop the fan’s power supply through this switch for variable air flow.

Single Phase: 220v 50Hz Fan Speed: 1,400rpm Air Flow: 5,500m³/hr (3,240cfm) Weight: 11kg Protection: IP55 Colour: White Dimensions: 47cm diam. x 35cm length Power: 235W (max 1.4A) Price Ref

Description

ACF 001

Low Cost Air Circulation Fan 5,500m /hr

Please Note: All prices exclude VAT

3

Ref

For Fan Size

Price

FSC 15

Up To 1.5 Amps

£49.95

1

2-4

5+

FSC 30

Up To 3 Amps

£59.95

£199.00

£179.00

£159.00

FSC 60

Up To 6 Amps

£79.95


74

Universal Control Panels

Fan Control Panel • IP65 enclosure with hinged

Heat Control Panel • IP65 enclosure with hinged

Vent Control Panel • IP65 enclosure with hinged

• • • • •

• • • • •

• • • • •

• • •

• • • •

waterproof door 230v 50 Hz input 10A max out Operational fault finding LED’s Front isolation switch Rotating control switch to allow manual control or connection of a thermostat c/c blue waterproof single phase plug Waterproof 240v plug output Connectors for daisy chain linking of multiple units Connectors for volt free automatic control

• • •

waterproof door 230v 50 Hz input Switched volt free output Operational fault finding LED’s Front isolation switch Rotating control switch to allow manual control or connection of a thermostat c/w blue waterproof single phase plug Connectors for daisy chain linking of multiple units Connectors for volt free automatic control

Ref

Description

Price

Ref

Description

Price

Ref

Description

Price

FCP 01

Fan Control Panel

£179.00

HCP 01

Heat Control Panel

£179.00

VCP 01

Vent Control Panel

£199.00

Twin-Skin Inflation Fan

Inflation fan for blowing air between the two polythene covers of a twin-skinned polytunnel. Twin skinning can reduce heating losses by 30%. A fan mounting bracket is supplied with Connection Kit (sold separately).  Several roofs, sides, ends or ‘D’ panels can be inflated from a single fan – ask for details.  For linking two sections together use the linking kits. The fan has an inbuilt pressure switch which starts and stops the fan as required without the need for any intervention, ensuring that the air pressure between the polythene sheets is always maintained.

Power: 220v (single phase), 70W, 0.5A Air flow: 300m³/hr (1,765cfm) Weight: 2.7kg Effective (cover size): 1,000m² (10,765ft²) Ref

Description

Price

TSK 01

Inflation Fan (single phase)

£149.00

TSK 02

Inflation Fan Connection Kit

£49.00

TSK 07

Twin-Skin Linking Kit

£29.00

HEATING, LIGHTING, VENTILATION AND CLIMATE

waterproof door 230v 50 Hz input 10A max out Operational fault finding LED’s Front isolation switch Rotating control switch to allow manual control or connection of a thermostat c/w blue waterproof single phase plug Waterproof 240v plug output Connectors for daisy chain linking of multiple units Connectors for volt free automatic control


75

Heaters Heater Size Chart Temperature Rise Required (°F/°C) 11°C (20°F)

16°C (30°F)

22°C (40°F)

27°C (50°F)

140m (5,000 cu ft)

14,000

20,000

27,000

34,000

200m (7,000 cu ft)

19,000

28,000

38,000

47,000

280m (10,000 cu ft)

27,000

40,000

54,000

67,000

425m (15,000 cu ft)

40,000

60,000

80,000

100,000

565m (20,000 cu ft)

54,000

80,000

107,000

133,000

850m (30,000 cu ft)

80,000

120,000

160,000

200,000

1,420m (50,000 cu ft)

133,000

200,000

266,000

333,000

2,830m (100,000 cu ft)

266,000

400,000

532,000

666,000

3

3

3 3 3 3

3

3

4,250m (150,000 cu ft)

400,000

600,000

800,000

1,000,000

5,660m3 (200,000 cu ft)

530,000

800,000

1,064,000

1,332,000

7,080m3 (250,000 cu ft)

665,000

1,000,000

1,332,000

1,665,000

8,500m3 (300,000 cu ft)

800,000

1,200,000

1,600,000

2,000,000

HEATING, LIGHTING, VENTILATION AND CLIMATE

3

BTU Capacity Required 1,000 Btu = 0.293kW

Space To Be Heated

Non-Electric Convector Heaters

These are the best and most advanced horticultural convector heaters available. Specifically designed for horticultural use. Ideal where no mains power is available (or cannot be relied upon). Often used in conjunction with air circulation fans to assist the distribution of the warm air. If only heating a small area the heat can be projected by convection alone. A small thermal current is generated from the pilot flame which operates the gas valve and thermostat, no mains electric power required, yet still very effective. Wide footprint for extra stability. Fully galvanised body for longer life.

Remote thermostat fitted to the end of a 6mtr cable. This allows you to measure the temperature where the plants are, and not just next to the heater.

Stainless steel burners which are also shielded from draughts.

Quick response thermostat to 1.5°C accuracy, 3°c to 30° range.

Piezo’ ignition (for pilot flame) fitted with flame failure detection for extra safety.

Runs off propane (LPG). Natural gas models available (call for details).

Ref

Heat Output

Dimensions

Approx. Frost Protection Area

Price (Inc. Delivery)

CHP 061

20,000btu/hr(6kw)

45cm wide x 20cm deep x 50cm high

500ft (46m )

£325.00

CHP 012

40,000btu/hr (12kw)

72cm wide x 36cm deep x 82cm high

1,000ft (93m )

£499.00

CHP 024

40-80,000btu/hr (24kw)

72cm wide x 36cm deep x 82cm high

2,000ft (185m )

£565.00

Please Note: All prices exclude VAT

2

3

2

2

3

3


76

Convector Heater with 12vDC/230vAC Fan This is our 40-80,000btu convector heater (The same as on page 75), but fitted with an air circulation fan. The fan can be powered with mains 230v electricity or from the 12v battery (NOT supplied). The battery is continually being charged when operating from mains electricity. In the event of a power failure the battery takes over and will run the fan for 12 hours before the needing to be re-charged, making this the ideal back-up heater. Comes with a fan controller which allows the fan to run continuously or just when the heater is firing. This function extends the battery life two-fold before recharging.

Supplied with built-in charger. Two selectable output settings, 40,000btu (12kw) or 80,000btu (24kw). Mounted on a transport trolley for easy transporting. The 1,000cfm (ft3 / min) fan will move the warm air up to 24m (80ft). Fan will operate from 230v mains electric supply or 12v DC car/leisure battery. Quick response thermostat to 1°C accuracy. Runs off propane (LPG). Natural gas models available (call for details). Ref

Heat Output

Fan Size

Approx. Frost Protection Area

Price (Inc. Delivery)

CHF 024

40-80,000btu/hr (24kw)

3,400m3/hr (1,000cfm)

185m2 (2,000ft2 )

£925.00

2.8kW Heater with Mechanical Thermostat This 2.8kW heater can be position at ground level or suspended from above. It should provide frost protection for a polytunnel or glasshouse up to 210sq ft (10ft x 20ft). Its stainless steel casing is splash proof protected (IPX4). Features capillary action thermostat and also has summer time mode, where rising temp triggers fan (only) operation to provide air circulation. Power Supply: 230v (main power) supply (max 13A input). Heat Settings: 1.0kW, 1.8kW or 2.8kW. Temperatures: Can achieve 0-26°C. Air Flow: 53w fan will circulate 460m3 of air per hour. CE approved with 2 year warranty. Ref

Dimensions

Price

EFH 28

41cm x 22cm x 33m

£209.00

HEATING, LIGHTING, VENTILATION AND CLIMATE

Also ideal for heating areas where there is no mains power supply. The battery operates the fan at night and is re-charged during the day.


Concept Heaters (Direct and In-Direct Fired)

HEATING, LIGHTING, VENTILATION AND CLIMATE

77

Designed and developed with outstanding, unique features.  The heavy-duty, IP55 rated air circulation fan is mounted on the under-side, taking in the coldest air whilst preventing the fan blades from collecting dust, as happens with side and top mounted fans.  Fan is selectable, allowing for either continuous operation or to run only when the heater is firing. The externally mounted burner is supplied to burn either oil (kerosene or paraffin) or gas (natural or LPG), and are interchangeable, allowing you to switch to the lowest cost fuel (providing you have both an oil and a gas burner).  The burner has a self-diagnostic control for ease of service/ set-up, and the complete burner can be easily removed and sent away for servicing without the need for an engineer to visit your site.  This ‘quick-release’ feature means any new type of burner can be easily fitted at a later stage making this heater future proof. The control panel is mounted in an IP65 rated  enclosure, and comes with a digital temperature control with remote sensor. Alternatively, control  relays can be fitted for computer control.  Requires single phase 230v AC power supply (3-phase can be supplied) Available in three sizes – 75Kw, 100Kw or 120Kw. Full nationwide installation service offered.   Both direct and in-direct fired models available - See facing page for details.

Continued on next page...

Please Note: All prices exclude VAT


Concept Heaters (Direct and In-Direct Fired)

78

In-Direct Fired Models The main body of the heater is galvanised, and has removable covers allowing quick, easy maintenance and access to the combustion chamber to allow for periodically changing the stainless-steel sacrificial heat shield.   The flame is totally enclosed within the combustion chamber, with the all the bi-products of combustion (waste gases) being completely exhausted from the building via the stainless steel flue (ordered separately).  This ensures the highest levels of air quality.  The air intake for the combustion process can be ducted from outside the building to ensure clean, efficient  combustion, however this only applies in dusty situations such as commercial poultry houses.  85-92% efficiency (depending upon fuel type). For the natural gas models we specify 1/2” gas hose for the 75Kw and 100Kw heaters, and 3/4” for the 120Kw unit. 

In-Direct Fired Heaters Ref

Fuel Type

Heat Output

Price (Inc. Delivery)

IFH 751

Gas

75Kw (255,000Btu)

£2,550.00

IFH 752

Oil

75Kw (255,000Btu)

£2,050.00

IFH 101

Gas

100Kw (340,000Btu)

£2,900.00

IFH 102

Oil

100Kw (340,000Btu)

£2,400.00

IFH 121

Gas

120Kw (410,000Btu)

£3,300.00

IFH 122

Oil

120Kw (410,000Btu)

£2,800.00

Direct Fired Models The main body is galvanised, for long life, and has removable covers allowing quick and easy internal access.  The extra-long, stainless steel combustion chamber keeps the body of the flame within the surrounds of the heater.  It also features an after-burn cassette to ensure cleaner combustion, a worthwhile advantage considering the bi-products of the combustion process remain within the building. For the natural gas models we specify 1/2” gas hose for the 75Kw and 100Kw heaters, and 3/4” for the 120Kw unit.  For propane (LPG) heaters we recommend using a 2 bar, two bottle changeover valve with a 37mb pressure regulator fitted at the heater.  This will ensure the heater receives the fuel at precisely the correct pressure. 100% efficiency with clean combustion  Direct-fired heaters enrich CO2 levels  Extras: Air duct kit, which brings clean air from outside of the building straight to the burner for even cleaner combustion, sling kit for suspending the heater, floor stand on which to sit the heater, auto changeover valves, regulators, hose etc. See page 80

Direct Fired Heaters Ref

Fuel Type

Heat Output

Price (Inc. Delivery)

DFH 751

Gas

75Kw (255,000Btu)

£1,650.00

DFH 752

Oil

75Kw (255,000Btu)

£1,550.00

DFH 101

Gas

100Kw (340,000Btu)

£1,750.00

DFH 102

Oil

100Kw (340,000Btu)

£1,650.00

DFH 121

Gas

120Kw (410,000Btu)

£1,900.00

DFH 122

Oil

120Kw (410,000Btu)

£1,800.00

HEATING, LIGHTING, VENTILATION AND CLIMATE

Extras: Flue kit (varies for each heater), sling kit for suspending the heater, floor stand on which to sit the heater, gas hose etc. For oil-fired heaters we can supply oil storage tanks and all the required fittings.


HEATING, LIGHTING, VENTILATION AND CLIMATE

79

Easy Clean, In-Direct Fired Cabinet Heaters

Can be fitted with either gas or oil burner.

Front mounted combination control with adjustable fan switch, burner modulation control for maximum efficiency, High efficiency cabinet heaters that ensure lower running and safety cut-out from overheating. costs.  All enclosed in an IP65 rated case. Galvanised body for longer life, with front and rear removable panels for easy access and quick cleaning/ Externally mounted burner which can be easily uncoupled maintenance.  and sent away for servicing. Front and rear panels are split in to two halves allowing Horizontal rear flue outlet. access to the heat exchanger and combustion chamber without having to disconnect the flue or remove the Multi outlet top cowls. burner when carrying out maintenance, effectively cutting Options: the service time in half. Poly-duct outlets Inverted heaters with bottom outlets The heat exchanger has a matrix of tubes with wave swirls Waste oil and bio-fuel heaters to ensure the maximum efficiency. Alarm systems to warn of heater failure Various heater control equipment Stainless steel combustion chamber with a replaceable Standard flue kits comes with 1 tee, 2 x 1mtr lengths of sacrificial shield. pipe, and 1 rain cap (stainless steel)  All waste gases are flued outside – vaious flue kits supplied separately. Single or three phase power supply Inverted heaters with bottom outlets Waste oil and bio-fuel heaters Alarm systems to warn of heater failure Various heater control equipment Fitted with heavy duty IP55 rated fans. Digital temperature control with thermostat fitted on a 10m cable.

Please Note: All prices exclude VAT

Ref

Fuel Type

Heat Output

Price (Inc. Delivery)

IFC150

Gas

44kW (150,000 Btu)

£2,700.00

IFC151

Oil

44kW (150,000 Btu)

£2,400.00

IFC200

Gas

58kW (200,000 Btu)

£3,000.00

IFC201

Oil

58kW (200,000 Btu)

£2,600.00

IFC300

Gas

88kW (300,000 Btu)

£3,300.00

IFC301

Oil

88kW (300,000 Btu)

£2,900.00

IFC400

Gas

117kW (400,000 Btu)

£4,500.00

IFC401

Oil

117kW (400,000 Btu)

£3,700.00

IFC500

Gas

146kW (500,000 Btu)

£4,900.00

IFC501

Oil

146kW (500,000 Btu)

£4,400.00

Ref

Description

Price

SFK 01

Standard Flue Kit for 44kW - 88kW

£185.00

SFK 02

Standard Flue Kit for 117kW

£195.00

SFK 03

Standard Flue Kit for 146kW

£225.00


80

Heater Accessories

Low Gas Gauge

Pressure Regulator

Orange propane hose sold per mtr. (Order the number of metres required and we will supply in one piece)

37mb pressure regulator is required for all heaters.

Fits between the regulator and the propane bottle.

Ref

Flow

Price

Ref

Description

Price

Ref

Size

Price

PRR 37

1.1kg / hr

£12.46

LGG 01

Low Gas Gauge

£25.00

OGH 85

8mm (5/16”)

£3.29

PRR 374

4kg / hr

£15.00

Auto Change-Over Valve

Polytunnel Flue Seal

40cm

Auto change-over valve for 2 propane cylinders, connects two gas bottles and switches over when one runs out. Including regulator and 8mm nipple. Ref

Heater Size

Price

COV 02

Up To 12kW (37mb)

£70.83

COV 03

Up To 24 kW (37mb)

£89.00

COV 04

Above 25 kW (2 Bar)

£109.00

40cm

Jubilee Hose Clips

Allows the flue to pass through a polytunnel cover.

To fit orange propane hose

Clamps to the polythene on both sides.

Ref

Size

Price

Ref

Description

Price

WDC 002

1/2”

£0.50

PFS 01

Seal for 5”- 8” Flue

£120.00

WDC 003

3/4”

£0.61

PFS 02

Seal for 7”-12” Flue

£120.00

HEATING, LIGHTING, VENTILATION AND CLIMATE

Orange Propane Hose


81

Dehumidifier

HEATING, LIGHTING, VENTILATION AND CLIMATE

ECO CLIMATE CONVERTER

Recent installations in the UK are showing energy savings of 50%-60% as verified by Farm Energy What does it do? The Eco Climate Converter (ECC) is a unique, fully-proven de-humidification system which uses a highly concentrated saline solution (lithium chloride) to remove excess humidity from your greenhouse atmosphere. The ECC removes the need to vent excessive humidity, eliminating all energy and CO2 losses associated with venting. As the humidity is lowered, crop transpiration becomes stabilized, further reducing the need to actually lower the humidity, harmonising the environment and reducing plant stress.

Running Costs? The primary energy input comes from your existing hot water heating system. A hot water supply between 65°C and 85°C is fed in to the ECC. Once the heat from this water has been used to recharge the saline solution it is then returned to your heating system. The small amount of heat which is absorbed during this process is returned (in full) to the greenhouse environment as warmed air, making the energy cost ZERO.

The only additional energy requirement is a small amount of electricity (approx. 2.5kWh) to run the two small water pumps and the fans. Bearing in mind you would need to run additional air circulation fans in the absence of the ECC anyway.

Free Heat On top of the massive energy savings already mentioned, the ECC actually takes the latent heat from the water vapour (which would normally be vented) and uses it to further warm the air inside the greenhouse. Further Savings This process of re circulating the air through the saline solution has a devastating effect on fungal spore populations thus reducing the requirement for expensive fungicide applications.

Coverage One unit will cover 1,000-2,000m²

depending on the crop. Typically, a crop of mature tomatoes, peppers etc. could need one unit per 1,000m², whereas herbs, bedding, young plants etc. may only require one unit for 2,000m².

Please Note: All prices exclude VAT


82 20°C 85% RH 1

Desiccant Shower

The concentrated saline solution absorbs the moisture held within the

WET AIR

2

DRY AIR

RADIATOR

35°C 30% RH 8 WARM DRY AIR

Saline solution diluted with water extracted from the wet air.

3

Hot Water

Cooled Water Steam

5

Recharged saline solution returning to the desiccant shower.

6

Condenses back to its liquid state by passing through the cool water shower.

Hot Steam Re-charged Saline Solution Saline solution heated to release the water.

7

How does it work? The ECC draws in humid air from within the glasshouse (1). The water vapour is then removed by passing the air through a matrix of desiccant filled elements inside a compact (cooling-type) tower (2). The desiccant (an extremely concentrated saline solution) absorbs water vapour from the air (3) and then passes through a heater which is heated from your existing hot water system (4). This process releases (evaporates) the captured water from the desiccant (5) and later condenses it back into its liquid state (6) to then be expelled from the unit (7). The hot-water energy input (used to heat the saline solution) is not lost or ‘used-up’, most of it is returned to the glasshouse heating system. The small amount of heat which is absorbed by the saline solution is later released back in to the greenhouse atmosphere via the radiator as warm, dry, spore-free air (8), just as originaly intended, meaning this process has NO energy costs. During this process, the latent heat which is held within the water vapour naturally warms up the desiccant. This heat is also released by the unit, back into the greenhouse atmosphere. The desiccant also has a disinfecting effect on the air being returned to the glasshouse, further reducing disease carrying spores such as Botrytis and powdery mildew, along with various bacteria and viruses. Contact us for more information or a quote 01282 873120 sales@npstructures.co.uk

Clean Water 12Ltr -20Ltr /Hr per 1,000m2 of greenhouse.

HEATING, LIGHTING, VENTILATION AND CLIMATE

4 HEATER


83

Porous Pipe Porous Pipe

Diameter: 16mm Optimum Working Pressure: 0.5 bar/7.6psi Working Length: 50m (max) Watering Rate: 2-6ltrs/mtrs/hrs Space Between Laterals: 30-60cm (depending on soil type) For Use With: 16mm barbed fittings See page 93 Porous Pipe is completely porous along its entire length, seeping water precisely where it is needed. It can be installed at ground level, below mulch or underground, minimising water loss to evaporation. It provides ideal gentle and precise watering for raised beds, fruit and vegetable plots, green houses and cloches. It’s quick and simple to install. Due to the fact Porous Pipe is made from recycled tyre remnants, the pipe is tough yet flexible. Porous Pipe works on low pressure - to ½ 1½ bar - therefore avoiding the need for expensive, heavy-duty pumps. It can normally be run using the head of water in storage tanks or mains water pressure.

Price Ref

Size

1

2-5

6-10

PPH 161

16mm x 25m

£18.00

£17.50

£16.50

PPH 162

16mm x 50m

£35.00

£33.00

£31.00

PPH 163

16mm x 100m

£69.00

£66.00

£63.00

PPH 164

16mm x 150m

£102.00

£97.00

£92.00

IRRIGATION AND WATER STORAGE

Pressure Compensating Drip-Line Compensating drip-line provides maximum uniformity for both subsurface and on-surface installations. The pressure compensating emitters are ideal for sloping terrains and the continuous self-flushing feature reduces ingestion of debris into the tubing. Applications Above or below ground installation. Ideal for horticultural and landscaped areas. Curved, angular or narrow planting areas. Wind resistant (unlike lightweight drip tapes) turf, shrubs, trees, veg etc. Features and Benefits Pressure compensating (each emitter discharges the same amount of water) Unique flow path, continuous self-cleaning design resists clogging Self-flushing/cleaning, elastomer diaphragm UV resistant – withstands heat and direct sun 100% water uniformity along the pipe. 30cm or 50cm dripper spacings. Flexible tubing adapts to any planting area shape. Specifications Dripper flow rate: 2.3lph (1.6lph on request) Pressure compensating range: 4m - 30m (0.4 bar - 3 bar) Wall Thickness: 1.0mm Recommended filtration: 0.10mm - 0.13mm (100µm -130µm) Bending Radius: 18cm (before kinking) Colour: Brown For Use With: 16mm barbed fittings See page 93 Price Ref

Tube Diameter

Emitter Output

Emitter Spacings

Coil Length

1-4

5-9

10+

CDL 001

16mm

1.6lph

30cm

100m

£47.00

£44.00

£40.00

CDL 002

16mm

1.6lph

50cm

100m

£44.00

£39.00

£35.00

Please Note: All prices exclude VAT


84

Pressure Compensating CNL Drippers Pressure compensating for precise, uniform watering regardless of pressure variances. Non-leakage design (anti-drain) eliminates leakages between irrigation cycles. Especially important for pulse irrigation. Self flushing.  Continuously allowing debris to pass through when detected. Used with 4-lead manifold sets (below) Ref

Flow Rate

Colour Base/Cap

1-499

500-999

1000+

CDR 001

4ltr / hr

Black/Brown

£0.38

£.0.36

£0.34

CDR 002

6ltr / hr

Black/Black

£0.38

£.0.36

£0.34

CDR 003

8ltr / hr

Green/Brown

£0.38

£.0.36

£0.34

4-Way Manifold Sets

Four 80cm microtubes connected with a 4-way manifold. Each micotube is fitted with an arrow stake at the outlet. Manifolds attach to the top of our PCJ or CNL drippers to allow multi-pot watering from one dripper. The dripper flow rate is therefore split between the 4 arrow stakes. ARROW ARROW ‘S’ Price Description

1-499

500-999

1000+

MSS 4

4-Way Manifold Set Arrow

£1.24

£1.14

£1.06

MSS 41

4-Way Manifold Arrow ‘S’

£1.24

£1.14

£1.06

Bespoke Fully Assembled Drip Systems

We can accurately pre-assemble your complete drip system cost effectively. This is often requested where high numbers of drip leads are required.  Simply choose from the options below and contact us for a quote. By machine inserting the drip leads to the LDPE supply pipe. Dripper

Microtube Length

Microtube OD x ID

Stake Options

LDPE Pipe Diam. (mm)

Dripper Spacing

Mixed Spacing

Available in White

PCJ / CNL

20-100cm

5 x 3.2mm

Prevo / Prevo ‘S’

16, 20, 25 or 32

3-300cm

YES

YES

Woodpecker

20-100cm

5 x 3.2mm

Prevo / Prevo ‘S’

16, 20, 25 or 32

3-300cm

YES

YES

Arrow

20-100cm

5 x 3.2mm

Arrow / Arrow ‘S’ /Arrow Mini / Arrow Low Flow

16, 20, 25 or 32

3-300cm

YES

YES

Spraystake

40-100cm

5 x 3.2mm

Yellow / Green / Black

16, 20, 25 or 32

5-200cm

NO

YES

IRRIGATION AND WATER STORAGE

Ref


85

Dripper And Drip Lead Assemblies Pressure compensating (PCJ) drippers are designed to ‘lock’ at the end of the irrigation cycle, preventing water draining from the system, therefore no need to refill system for the next irrigation cycle. Dripper closes (‘locks’) when pressure falls to 1.2m head (2psi approx.) and opens again when the pressure reaches 3mtr head (4.3psi). Output is unaffected by varying input pressures or slopes. As long as the pressure to the dripper remains between 0.7-4.0 bar (10-58psi), the drippers output will be accurate. Higher pressure drippers also available. Un-Regulated Drippers are not pressure compensating and as such can have a slight variation in output depending upon the pressure. They have a tendency to drain after use. Often used where liquid feeding is not required.

Un-regulated Woodpecker Dripper Assemblies Pre-assembled sets come with: non-pressure regulating dripper Microtube 80cm long Straight Prevo stake Price Ref

Microtube Length

Output

1-499

500-999

1000+

DRI 010

80cm

2 ltr/hr

£0.56

£0.51

£0.48

DRI 011

80cm

4 ltr/hr

£0.56

£0.51

£0.48

Pressure Compensating Woodpecker Dripper Assemblies (PCJ) Pre-assembled sets come with: Pressure compensating dripper, straight Prevo stake or angled Prevo ‘S’ stake and a 50cm or 80cm long microtube. Operating Pressure: 1.5-4 bar. Other options available, call for details. Flow rate colour coded Prevo

IRRIGATION AND WATER STORAGE

Prevo ‘S’

Price Ref

Microtube Length

Output

Stake Type

1-499

500-999

1000+

DRI 016

80cm

2 ltr/hr

Prevo Stake

£0.31

£0.29

£0.27

DRI 017

80cm

4 ltr/hr

Prevo Stake

£0.31

£0.29

£0.27

DRI 018

50cm

1.2 ltr/hr

Prevo ‘S’ Stake

£0.29

£0.27

£0.25

DRI 019

50cm

2 ltr/hr

Prevo ‘S’ Stake

£0.29

£0.27

£0.25

DRI 022

50cm

3 ltr/hr

Prevo ‘S’ Stake

£0.29

£0.27

£0.25

DRI 021

50cm

4 ltr/hr

Prevo ‘S’ Stake

£0.29

£0.27

£0.25

DRI 020

80cm

2 ltr/hr

Prevo ‘S’ Stake

£0.31

£0.29

£0.27

Un-regulated Dripper Assemblies With Cap Assembled ‘ready to use’ unit for plugging into LDPE laterals. Dripper has nipple outlet to accommodate dripper cap. Pre-assembled sets come with: non-pressure regulating dripper, 5mm insert nipple, microtube 80cm long and dripper cap. Price

Pipe clamp stake sold separately.

Ref

Output

Description

1-499

500-999

1000+

DRI 035

4 ltr/hr

Nipple and Cap & 80cm Lead

£0.48

£0.44

£0.41

DRI 036

8 ltr/hr

Nipple and Cap & 80cm Lead

£0.48

£0.44

£0.41

DRI 037

N/A

Pipe Clamp Stake

£0.14

£0.13

£0.12

Un-regulated Woodpecker Dripper Ideal for using with pots, containers and planters.The dripper is suitable for screwing into microtube for a secure connection. It is suitable for working with a maximum pressure up to 2 bar. It is easy to install and features a labyrinth technology for reliable water flow and a wide water passage to prevent clogging. Price

(Drip emmiter only) Please Note: All prices exclude VAT

Ref

Output

1-499

500-999

1000+

DRI 040

2 ltr/hr

£0.35

£.0.32

£0.31

DRI 041

4 ltr/hr

£0.35

£.0.32

£0.31


86

Pressure Compensating Woodpecker Dripper Unaffected by varying inlet pressure and field slopes Flow rate colour coded Uniform, precise and consistent irrigation CNL prevents water drainage and eliminates need of refill, ensuring instant pressure compensated flow at every irrigation. Can also be used with the 4-way manifold sets (see page 84) Operating pressure 0.7-4.0 bar

Price Ref

Output

1-499

500-999

1000+

DRI 006

2ltr/hr

£0.26

£0.24

£0.22

DRI 007

4ltr/hr

£0.26

£0.24

£0.22

DRI 008

8ltr/hr

£0.26

£0.24

£0.22

Pressure Compensating Spray Stake Output: 12ltr/hr Suitable for trees and shrubs Wide spray pattern reduces run-off High flow rate reduces wind drift Pressure compensating for precise, uniform flow rate Spray stake and 80cm lead sold separately - both required. Ref

Description

1-499

500-999

1000+

DRI 030

Purple Spray Stake

£0.38

£0.35

£0.33

DRI 031

80cm Lead with 12ltr/hr Emitter

£0.38

£0.35

£0.33

Adjustable Spike Mounted Dripper

6/4 Microtube Black LDPE microtube to suit barbed 5mm fittings and drippers.

Flow and coverage can be altered by rotating the cap. Finger-tip flow control with shut-off option. Spike design to anchor dripper at the plant base. Comes with insert nipple (attached) to connect microtube to lateral pipe (simply twist off). Ref

Description

1-99

100-499

500+

Ref

Description

1-9

10+

ASM 001

Spike Mounted Dripper

£0.49

£0.39

£0.29

MIC 64

6/4mm x 100m Microtube

£15.00

£14.00

Dripper Cap

Deluxe 3mm Hole Punch For use with drippers with a nipple outlet.

Cuts a 3mm hole in LDPE pipe. Suitable for all our drip products.

Ref

Description

1-499

500-999

1000+

Ref

Description

Price

DRI 025

Dripper Cap

£0.09

£.0.08

£0.07

MHP 2

Deluxe 3mm Hole Punch

£7.20

5mm Insert Nipple

5mm Barbed x Threaded Tee

The large barb plugs into supply pipe. Tapered barbs for microtube. Use a 3mm hole punch.

Threads are much easier to attach microtube to, the barb holds better in the supply pipe. Use a 3mm hole punch.

Ref

1-499

500-999

1000+

Ref

1-499

500-999

1000+

DIN 005

£0.07

£.0.06

£0.05

DRI 027

£0.11

£0.10

£0.09

IRRIGATION AND WATER STORAGE

Tube Size: OD 6mm ID 4mm Reel Length: 100m


87

Capillary Matting Standard weight capillary matting for both indoor and outdoor use. Suitable for use on benching and on the floor. Holds 3ltrs of water per m2 Weight: 247g per m2 Excellent water retention Minimises disease and weed issues An environmentally friendly 100% recycled product Water and feed delivered to plants at an optimal rate No shrinkage Long lasting & durable Even water distribution

IRRIGATION AND WATER STORAGE

Applications: Indoor and outdoor display areas at retail point Polytunnel floors/benches Nursery and growing areas Ref

Width

Length

Price

LAN 060

60cm (2ft)

50m

£99.00

LAN 090

91cm (3ft)

50m

£140.00

LAN 120

122cm (4ft)

50m

£180.00

LAN 140

142cm (4’8”)

50m

£190.00

LAN 183

183cm (6ft)

50m

£240.00

Low Flow Fogger

Rondo Mist Sprayer

6mm Female Push-Fit 70 µm droplets 18 ltr/hr

6mm Female Push-Fit 150µm droplets 47 ltr/hr at 3 bar Operating Pressure: 2.5 - 3.0 bar Space 1m apart

Male adaptor (usually required) Ref

Ref

Male adaptor (usually required)

Size

Price

Size

Price

LFF 322

4-Way Fogger

£5.00

RMS 001

Rondo Mist Sprayer

£1.20

MAR 006

Male Adaptor (6mm Push-Fit)

£0.15

MAR 006

Male Adaptor (6mm Push-Fit)

£0.15

Mist Nozzle Our mist nozzles are constructed from a robust, glass filled, nylon frame and benefit from a stainless steel jet and anvil. These nozzles have been and still are widely used throughout the professional horticultural industry so you can be assured of reliable results every time. Supplied with a ½” male BSP thread.

Please Note: All prices exclude VAT

Ref

Description

Price

MNE 001

1/2” Male BSP Mist Nozzle

£9.50


88

Mist Propagation Kit Our automatic mist propagation kits have been designed for the professional and amateur grower alike. When propagating plants by cuttings, it is important to prevent wilting until roots are produced. When using our mist and wean system you can control the amount of mist, as excessive moisture will lower the temperature of the rooting medium, reduce its oxygen content and that in turn, creates a favourable environment for decay-causing organisms (mould!). As evaporation increases, moisture covering the wet leaf sensor reduces. This mist control is monitored via a “wet leaf” sensor. This sensor is linked to the control panel, and suitably located in the crop, under the mist cover. The wet leaf sensor relays the evaporation rate to the control panel, which in turn, regulates the frequency of misting. The wet leafs sensitivity can be adjusted from the control panel offering infinitely variable control over your misting. Our mist propagation kits include all of the components required to provide automated mist over your bench. They are simple to install, manage, monitor and guarantee good results

Kits include: Valves, filters, mist nozzles, pipe work, fittings, controller and wet leaf sensor. Description

Price

MPK 001

1m Long Bench Kit

£237.00

MPK 002

2m Long Bench Kit

£253.00

MPK 003

3m Long Bench Kit

£268.00

MPK 004

4m Long Bench Kit

£284.00

MPK 005

5m Long Bench Kit

£300.00

MPK 006

6m Long Bench Kit

£316.00

MPK 007

7m Long Bench Kit

£332.00

MPK 008

8m Long Bench Kit

£347.00

MPK 009

9m Long Bench Kit

£363.00

MPK 010

10m Long Bench Kit

£379.00

Mist Propagation Controller This simple propagation controller (as used in the kit above) will give you control over your rooting environment. Simple to use and simple to set up. In the early stages of growth the control can be set to give predominantly mist conditions. As the cutting matures the interval between misting can be increased, thereby effectively weaning the plant off the mist and encouraging rapid root growth. • Safe 24v AC Output • Interval timing between 0 – 30 minutes • Mist burst lengths 0 – 10 seconds • Mist when leaf wet • Mist until leaf wet • Adjustable leaf sensitivity control with LED indication

Ref

Description

Price

MPC 001

Mist Propagation Controller

£160.00

SEN 001

2m Wet Leaf Sensor

£30.00

IRRIGATION AND WATER STORAGE

Bench NOT Included

Ref


89

Overhead Irrigation - Drip Assemblies A choice of spray-line connectors available, M11 or 3/8”WW threaded for grey PVC pipe or a barbed PE adaptor for black polyethylene pipe. We use M11 pipe and connectors as standard. The use of drop-tubes ensures all the sprinklers hang true to give optimum performance.  They also keep the spray-line dry to prevent dripping. Anti-drip valves give instant, simultaneous start up and shut off, and prevent the water in the spray-line dribbling out after irrigation has finished. Ein Dor and Netafim parts are all 6mm push-fit and are all fully interchangeable.

Drip Assembly - EIN DOR

Drip Assembly - NETAFIM M11 Sprayline Connector

M11 Sprayline Connector

3/8WW Sprayline Connector

LDPE Pipe Adaptor

30cm Drop Tube & Weight

IRRIGATION AND WATER STORAGE

30cm Drop Tube & Weight

Isolation Valve Anti-Drip Valve Anti-Drip Valve 360° Sprayers

Red 120 ltr/hr Sprayer (360°) Brown 160 ltr/hr Sprayer (360°) Black 70 ltr/hr Sprayer (180°) Ref

Description

1-49

50-99

100+

Ref

Description

1-49

50-99

100+

M11 Sprayline Connector

£0.11

£0.09

£0.07

MSC 001

M11 Sprayline Connector

£0.12

£0.10

£0.08

NSA 011

WSC 001

3/8WW Sprayline Connector

£0.17

£0.15

£0.13

NSA 038

3/8 WW Sprayline Connector

£0.11

£0.09

£0.07

LPA 001

LDPE Pipe Adaptor

£0.20

£0.18

£0.16

LPA 001

LDPE Pipe Connector

£0.20

£0.18

£0.16

DTW 001

30cm Drop Tube and Weight

£1.15

£1.00

£0.90

NSD 030

30cm Drop Tube and Weight

£0.98

£0.90

£0.84

ISV 001

Isolation Valve

£0.70

£0.68

£0.66

NSA 001

Anti-Drip Valve

£0.79

£0.73

£0.68

ADV 001

Anti-Drip Valve

£0.86

£0.84

£0.82

NSS 120

70/120 ltr/hr Sprayer (c/w SD)

£0.92

£0.85

£0.79

RSN 120

Red 120ltr/hr Sprayer (360°)

£0.56

£0.49

£0.44

NSS 160

90/160 ltr/hr Sprayer (c/w SD)

£0.92

£0.85

£0.79

BSN 160

Brown 160ltr/hr Sprayer (360°)

£0.56

£0.49

£0.44

NSS 220

120 ltr/hr Sprayer

£0.92

£0.85

£0.79

HSN 070

Black 70ltr/hr Sprayer (180°)

£0.90

£0.83

£0.75

NSS 200

200 ltr/hr Sprayer

£0.92

£0.85

£0.79

Image

4 - 6mm Male push-fit

2 - 1/2” Male BSP base for connecting 6mm push-fit

1- 6mm Male push-fit plug

Ref

3- 6mm Female push-fit Description

Price

1

PLU 006

6mm Male Push-Fit Plug

£0.15

2

MFP 006

1/2” Male BSP x 6mm Female Push-Fit Adaptor

£0.30

3

FAD 006

6mm Female x 6mm Female Push-Fit Adaptor

£0.15

4

MAR 006

6mm Male x 6mm Male Push-Fit Adaptor

£0.15


90

Overhead Irrigation Systems

All of our overhead irrigation systems give the highest levels of uniformity with the least amount of wasted water. All kits include 30cm weighted drop tubes, anti-drip valves, and the specific sprayer for each particular width of greenhouse.  After all, a sprayer which is suitable for an 18ft wide polytunnel wouldn’t suit a 30ft wide tunnel, and visa versa.  Supplied with two 32mm PVC spray-lines, 50mm header pipe (manifold), PVC ball valve on each line, support wires, pipe clips, Geka hose coupling, and all the necessary fixtures and fittings (even including the glue). We offer two types of overhead irrigation kits – ‘single strip watering’ for single span polytunnels and ‘overlapping’ for full house irrigation in multi-span polytunnels/greenhouses.  

Single Strip (Individual Bay Irrigation)

Overlapping (Full House Irrigation)

Ideally suited to larger multi-span polytunnels/greenhouses where uniform watering across the whole area is required. Each spray-line overlaps the spray-lines on each side by 50%, effectively giving 100% overlap as each spray-line is overlapped from both sides.  Over lapping gives the highest levels of uniformity, as is usually required when watering a large crop with similar water requirements.  Even though several factors can influence the overall uniformity we would still expect approx. 90-95% between the first and last spray-line in the  greenhouse. For multi-span polytunnels/greenhouses you need to order one kit per bay.

SINGLE STRIP (INDIVIDUAL BAY IRRIGATION)

OVERLAPPING (FULL HOUSE IRRIGATION)

Single Span Polytunnel WIDTH

Multi-Span / Glasshouse WIDTH

LENGTH

18ft (5.5m)

21ft (6.4m)

24ft (7.3m)

27ft (8.2m)

30ft (9.1m)

21ft 6in (6.5m)

26ft 6in (8m)

30ft

£177.24

£177.24

£177.24

£177.24

£177.24

£164.64 / Bay

£164.64 / Bay

40ft

£201.40

£201.40

£201.40

£201.40

£201.40

£183.00 / Bay

£183.00 / Bay

50ft

£230.76

£230.76

£230.76

£230.76

£230.76

£201.36 / Bay

£201.36 / Bay

60ft

£254.92

£254.92

£254.92

£254.92

£254.92

£224.72 / Bay

£224.72 / Bay

70ft

£279.08

£279.08

£279.08

£279.08

£279.08

£243.08 / Bay

£243.08 / Bay

80ft

£303.24

£303.24

£303.24

£303.24

£303.24

£261.44 / Bay

£261.44 / Bay

90ft

£327.40

£327.40

£327.40

£327.40

£327.40

£284.80 / Bay

£284.80 / Bay

100ft

£356.76

£356.76

£356.76

£356.76

£356.76

£303.16 / Bay

£303.16 / Bay

110ft

£383.88

£383.88

£383.88

£383.88

£383.88

£321.68 / Bay

£321.68 / Bay

120ft

£408.04

£408.04

£408.04

£408.04

£408.04

£345.04 / Bay

£345.04 / Bay

130ft

£432.20

£432.20

£432.20

£432.20

£432.20

£363.40 / Bay

£363.40 / Bay

IRRIGATION AND WATER STORAGE

Ideal for single span polytunnels. Each spray-line waters half of the polytunnel, from the side to the central path.  A special device on each nozzle ensures that most of the water falls uniformly within the strip. This allows you to have a different watering regime on each side of your tunnel without any overlap.  Also suitable in multi-span polytunnels/greenhouses where the same effect is desired. Even though several factors can influence the overall uniformity we would still expect around 80% with these systems (much higher than any other comparable system).  


91

Rotaframe Sprinkler

Flow: 16ltr/min (at 2 Bar) Diam. Coverage: 16m

Part/Full Circle Metal Sprinkler

Part/Full Circle Plastic Sprinkler

Large Part/Full Circle Metal Sprinkler

Flow: 14ltr/min (at 2 Bar) Diam. Coverage: 25m

Flow: 14ltr/min (at 2 Bar) Diam. Coverage: 24m

Flow: 20ltr/min (at 2 Bar) Diam. Coverage: 28m

Ref

Size

Price

SPR 001

1/2” F BSP

£7.10

Ref

Size

Price

Ref

Size

Price

Ref

Size

Price

SPR 002

3/4” F BSP

£7.50

SPR 005

1/2” M BSP

£10.95

SPR 003

1/2” MBSP

£5.35

SPR 004

3/4” F BSP

£24.45

Push In Stand Pipe

Cross Base Stand Pipe

3/4” Male BSP sprinkler connection

3/4” Male BSP sprinkler connection

Sprinkler Sled Base 3/4” Male BSP sprinkler connection

IRRIGATION AND WATER STORAGE

30cm high riser

1m high riser

1m high riser

Ref

Price 1-9

Price 10-20

STA 003

£25.00

£22.00

Jubilee Hose Clips

25cm Spike Ref

Clip Size / Fits Hose

Price

WDC 002

13mm - 20mm / 1/2”

£0.50

Ref

Price 1-9

Price 10-20

Ref

Price 1-9

Price 10-20

WDC 003

17mm - 25mm / 3/4”

£0.61

STA 004

£25.00

£23.00

STA 005

£31.20

£29.00

WDC 004

25mm - 35mm / 1”

£0.68

Galvanised Reducing Socket

Blanking Cap

PTFE Tape

Adaptor for 1/2” male threaded sprinklers.

Ref

Size

Price

Ref

Size

Price

Ref

Size

Price

FRS 001

3/4” x 1/2” Female BSP

£1.40

QCC 001

Brass Blanking Cap

£2.59

PTE 121

12mm x 12mtr

£0.83

Please Note: All prices exclude VAT


Overhead Hose Tracking Kits

92

A simple and reliable way to use and store hose pipe in the tunnel / glass house. Heavy duty Simple to install Economical Light and easy to use Free running in operation High safety factor Minimal maintenance Zero crop damage from hose pipe

The hose tracking rails is fixed to your structure using the appropriate brackets and screws. Ideally to bracing bars (crop bars) if a polytunnel, or to trellis beams in a glasshouse. If your polytunnel isn’t fitted with bracing bars (crop bars), don’t worry, we can supply the kit with brackets to fasten to your hoops.  Each trolley has four wheels to give a very smooth, snag free operation.  Once assembled this system allows free flowing movement of your hose up and down your greenhouse.

Kit includes: Tracking rail, couplers and support brackets Hose trolleys with hose supports End stops and end caps ¾” (19mm) Hose – ½” and 1” can also be supplied Soft rain watering lance (other options available)

Contact us for a quotation Supplied in 6 metre sections

IRRIGATION AND WATER STORAGE

Supplied with ¾” hose and watering lance. Can also be supplied with specialist hoses and a selection of triggers/nozzles.


93

16 / 20mm Pipe Stake

LDPE Pipe

Pipe Clips

To secure 16mm and 20mm pipe to the ground.

Ref

Size

Price

PCT 16

16mm

£0.19

Ref

Size

Price

PCT 20

20mm

£0.24

PAS 162

Pipe Stake

£0.40

PCT 25

25mm

£0.32

Barbed Reducing Connector

Straight Connector Price Ref

Size

1

2-9

10+

LDP 161

16mm x 50mtr

£20.00

£19.00

£17.00

Ref

Size

Price

LDP 160

16mm x 100mtr

£29.00

£26.00

£23.00

BSC 16

16mm

£0.15

Ref

Size

Price

LDP 200

20mm x 100mtr

£36.00

£33.00

£30.00

BSC 20

20mm

£0.19

BRE 16

20mm x 16mm

£0.19

LDP 250

25mm x 100mtr

£60.00

£54.00

£61.00

BSC 25

25mm

£0.25

BRE 202

25mm x 20mm

£0.29

IRRIGATION AND WATER STORAGE

Plug

Tee Connector

Barbed Female Threaded Adaptor

Elbow Connector

Ref

Size

Price

Ref

Size

Price

Ref

Size

Price

BPG 16

16mm

£0.15

BTC 16

16mm

£0.16

BEC 16

16mm

£0.23

Ref

Size

Price

BPG 20

20mm

£0.18

BTC 20

20mm

£0.22

BEC 20

20mm

£0.25

BFA 163

16mm x 3/4”

£0.50

BPG 25

25mm

£0.25

BTC 25

25mm

£0.48

BEC 25

25mm

£0.56

BFA 203

20mm x 3/4”

£0.58

Barbed Male Threaded Tee

Barbed Male Threaded Adaptor

Reducing Tee Connector

Ref

Size

Price

Ref

Size

Price

BMA 162

16mm x 1/2”

£0.21

BMT 163

16mm x 3/4” x16mm

£0.24

BMA 163

16mm x 3/4”

£0.21

BMT 203

20mm x 3/4” x 20mm

£0.40

Ref

Size

Price

BMA 203

20mm x 3/4”

£0.23

BMT 253

25mm x 3/4” x 25mm

£0.60

BRT 201

20mm x 16mm x 20mm

£0.40

BMA 253

25mm x 3/4”

£0.28

BMT 254

25mm x 1” x 25mm

£0.70

BRT 251

25mm x 16mm x 25mm

£0.60

BMA 254

25mm x 1”

£0.30

Barbed Male Threaded Valve

Barbed Male Threaded Elbow

Barbed Valve

Ref

Size

Price

BME 163

16mm x 3/4”

£0.28

Ref

Size

Price

Ref

Size

Price

BME 203

20mm x 3/4”

£0.31

BVE 16

16mm

£0.86

BMV 16

16mm x 3/4”

£0.89

BME 253

25mm x 3/4”

£0.67

BVE 20

20mm

£0.88

BMV 20

20mm x 3/4”

£0.89

BME 254

25mm x 1”

£0.67

BVE 25

25mm

£0.98

Please Note: All prices exclude VAT


Male Nipple

Ref

Size

Price

GMN 001

1/4”

£1.21

Ref

Size

Price

GMN 002

1/2”

£0.96

FES 001

1/2”

£0.96

GMN 003

3/4”

£1.09

FES 002

3/4”

£1.15

GMN 004

1”

£1.54

FES 003

1”

£1.54

GMN 005

1 1/4”

£2.56

FES 004

1 1/4”

£2.62

GMN 006

1 1/2”

£2.94

FES 005

1 1/2”

£3.58

GMN 007

2”

£5.37

FES 006

2”

£5.37

Male / Female Slow Bend

Ref

Size

94

Hollow Plug

Female Equal Socket

Ref

Size

Price

GHP 001

1/2”

£0.75

GHP 002

3/4”

£0.95

GHP 003

1”

£1.16

GHP 004

1 1/4”

£1.64

GHP 005

1 1/2”

£2.73

Ref

Size

Price

FFU 001

1/2”

£4.09

FFU 002

3/4”

£4.48

FFU 003

1”

£5.24

FFU 004

1 1/4”

£7.92

FFU 005

1 1/2”

£9.95

Ref

Size

Price

FET 001

1/2”

£1.40

FET 002

3/4”

£2.05

FET 003

1”

£2.94

FET 004

1 1/4”

£4.86

FET 005

1 1/2”

£6.65

Female Union

Female Reducing Socket

Price

Ref

Size

Price

FRS 001

3/4” x 1/2”

£1.40

1/2”

£1.80

FRS 003

1” x 1/2”

£1.85

FSB 002

3/4”

£2.61

FRS 002

1” x 3/4”

£1.73

FSB 003

1”

£3.83

FRS 004

1 1/4” x 1”

£2.94

FSB 004

1 1/2”

£8.06

FRS 005

2” x 1 1/2”

£5.37

Female Elbow

Female Tee

Male Reducing Nipple

Ref

Size

Price

FFE 001

1/2”

£1.02

FFE 002

3/4”

£1.40

FFE 003

1”

£2.18

FFE 004

1 1/4”

£3.58

FFE 005

1 1/2”

£6.02

FFE 006

2”

£7.03

PTFE Tape

Female Reducing Bush

Ref

Size

Price

MRN 001

1/2” x 1/4”

£1.85

MRN 002

3/4” x 1/2”

£1.60

MRN 004

1” x 1/2”

£2.75

Ref

Size

Price

MRN 003

1” x 3/4”

£1.60

MFB 001

1/2” x 1/4”

£0.77

MRN 005

1 1/4” x 1”

£2.62

MFB 003

3/4” x 1/2”

£0.89

MRN 006

1 1/2” x 1”

£5.94

MFB 002

1” x 3/4”

£1.15

MRN 007

1 1/2” x 1 1/4”

£3.32

MFB 004

1” x 1/2”

£1.09

Ref

Size

Price

MRN 008

2” x 1 1/4”

£6.96

MFB 005

1 1/4” x 1”

£1.34

PTE 121

12mm x 12mtr

£0.83

MRN 009

2” x 1 1/2”

£6.32

MFB 006

1 1/2” x 1”

£1.85

IRRIGATION AND WATER STORAGE

FSB 001


95 Metric PVC pipe is widely used in horticulture and All PVC pipe is 10 Bar (147psi) rated and most of the agriculture where non-portable (non-drinking) water fittings are 16 bar (235psi). PVC is very versatile and easy needs transporting. to use. Simply cut the pipe to length, clean the ends with methylene chloride, removing any debris, apply glue to PVC is a low cost and effective way to plumb your both the pipe and fitting - then push together. irrigation supply. Pumps, valves, filters etc can be easily be connected by The 32mm pre-drilled pipe is used for overhead spray using the various BSP threaded connectors. lines. We use M11 as standard.

Plain Pipe

Drilled Pipe (For Spraylines) 10 Bar rated Socketed at one end

Socketed at one end

IRRIGATION AND WATER STORAGE

Price Ref

Size

1-9

10-24

25+

PPP 20

20mm x 5mtr

£2.20

£1.90

£1.50

PPP 32

32mm x 5mtr

£4.80

£3.50

£3.15

PPP 40

40mm x 5mtr

£6.00

£4.90

£4.10

PPP 50

50mm x 5mtr

£9.50

£7.00

£6.75

PPP 63

63mm x 5mtr

£12.00

£9.00

£8.00

PPP 75

75mm x 5mtr

£17.50

£12.00

£11.00

PPP 90

90mm x 5mtr

£25.00

£18.00

£17.00

Male Threaded Elbow

Price Ref

Size

1-9

10-24

25+

PPD 322

32mm x 5mtr M11 Drilled Every 1m

£5.20

£3.85

£3.50

PPD 321

32mm x 4.5mtr M11 Drilled Every 1.5m

£5.00

£3.42

£3.10

PPD 324

32mm x 5mtr 3/8”WW Drilled Every 1m

£5.20

£3.85

£3.50

PPD 323

32mm x 4.5mtr 3/8”WW Drilled Every 1.5m

£5.00

£3.42

£3.10

Reducing Bush

Ref

Size

Price

PTE 324

32mm x 1”

£1.22

PTE 325

32mm x 1 1/4”

£0.93

PTE 505

50mm x 1 1/4”

£1.98

MET/IMP Sockets

Male Threaded Adaptor

Ref

Size

Price

PMT 202

20mm x 1/2”

£0.57

PMT 203

20mm x 3/4”

£0.57

PMT 322

32mm x 1/2”

£0.63

Ref

Size

Price

PMT 323

32mm x 3/4”

£0.63

PRB 322

32mm x 20mm

£0.57

PMT 324

32mm x 1”

£0.63

PRB 403

40mm x 32mm

£0.61

PMT 325

32mm x 1 1/4”

£0.69

PRB 503

50mm x 32mm

£1.12

PMT 405

40mm x 1 1/4”

£0.96

PRB 504

50mm x 40mm

£0.83

PMT 504

50mm x 1”

£1.72

PRB 633

63mm x 32mm

£1.52

PMT 505

50mm x 1 1/4”

£1.72

PRB 634

63mm x 40mm

£1.52

PMT 506

50mm x 1 1/2”

£1.72

PRB 635

63mm x 50mm

£1.38

PMT 508

50mm x 2”

£1.72

Ref

Size

Price

PRB 753

75mm x 32mm

£2.56

PMT 636

63mm x 1 1/2”

£2.82

PMI 20

20mm x 1/2”

£0.56

PRB 755

75mm x 50mm

£2.56

PMT 638

63mm x 2”

£2.82

PMI 32

32mm x 1”

£0.66

PRB 756

75mm x 63mm

£2.36

PMT 758

75mm x 2”

£4.92

PMI 40

40mm x 1 1/4”

£0.99

PRB 905

90mm x 50mm

£4.33

PMT 751

75mm x 3”

£6.57

PMI 50

50mm x 1 1/2”

£1.30

PRB 906

90mm x 63mm

£4.33

PMT 901

90mm x 3”

£9.25

PMI 63

63mm x 2”

£1.92

PRB 907

90mm x 75mm

£4.33

PMT 902

90mm x 4”

£11.53


Reducing Sockets

96

Threaded Bush

90° Slow Bend

Ref

Size

Price

PRS 322

32mm x 20mm

£1.07

Ref

Size

Price

PRS 403

40mm x 32mm

£1.12

PSB 32

32mm

£1.76

Ref

Size

Price

PRS 503

50mm x 32mm

£2.08

PSB 40

40mm

£2.39

PTB 322

32mm x 1/2”

£1.35

PRS 635

63mm x 50mm

£3.42

PSB 50

50mm

£3.56

PTB 323

32mm x 3/4”

£1.35

PRS 755

75mm x 50mm

£4.02

PSB 63

63mm

£6.91

PTB 404

40mm x 1”

£1.76

PRS 756

75mm x 63mm

£4.02

PSB 75

75mm

£9.70

PTB 504

50mm x 1”

£2.27

PRS 907

90mm x 75mm

£6.08

PSB 90

90mm

£17.90

PTB 636

63mm x 1 1/2”

£3.65

Female Threaded Adaptor

45° Plain Elbow

Threaded Socket

Ref

Size

Price

Size

Price

PTS 050

1/2”

£1.32

PFT 202

20mm x 1/2”

£1.10

PTS 075

3/4”

£1.71

PFT 322

32mm x 1/2”

£2.18

Ref

Size

Price

PTS 100

1”

£2.42

PFT 323

32mm x 3/4”

£2.18

PFE 20

20mm

£1.22

PTS 125

1 1/4”

£2.86

PFT 324

32mm x 1”

£2.18

PFE 32

32mm

£1.35

PTS 150

1 1/2”

£3.80

PFT 505

50mm x 1 t1/4”

£3.37

PFE 40

40mm

£1.81

PTS 200

2”

£5.37

PFT 506

50mm x 1 1/2”

£3.08

PFE 50

50mm

£2.12

PFT 638

63mm x 2”

£4.65

PFE 63

63mm

£3.71

PFT 751

75mm x 2 1/2”

£13.36

PFE 75

75mm

£5.96

PFT 901

90mm x 3”

£15.20

PFE 90

90mm

£9.09

90° Plain Elbow

Reducing Elbow

Plain Socket

Ref

Size

Price

PRE 503

50mm x 32mm

£1.98

‘S’ Bend

Ref

Size

Price

Ref

Size

Price

PNE 20

20mm

£0.66

PPS 20

20mm

£0.44

PNE 32

32mm

£0.81

PPS 32

32mm

£0.51

PNE 40

40mm

£1.13

PPS 40

40mm

£0.78

PNE 50

50mm

£1.64

PPS 50

50mm

£1.04

PNE 63

63mm

£3.20

PPS 63

63mm

£1.54

Ref

Size

Price

PNE 75

75mm

£6.07

PPS 75

75mm

£3.01

PSB 321

32mm

£3.13

PNE 90

90mm

£9.21

PPS 90

90mm

£4.80

PSB 501

50mm

£4.98

IRRIGATION AND WATER STORAGE

Ref


97

Equal Nipple

Reducing Nipple

Ref

Size

Price

PEN 050

1/2”

£0.83

PEN 075

3/4”

£0.96

PEN100

1”

£1.18

PEN125

1 1/4”

£1.48

PEN 150

1 1/2”

£2.19

PEN 200

2”

£2.93

PEN 300

3”

£10.64

Equal Tee

Ref

Size

Price

PRN 075

3/4” x 1/2”

£1.08

PRN 100

1” x 3/4”

£1.24

PRN 125

1 1/4” x 1”

£1.58

PRN 150

1 1/2” x 1 1/4”

£2.31

PRN 200

2” x 1 1/2”

£3.08

Male Branch Tee

IRRIGATION AND WATER STORAGE

Reducing Tee

Ref

Size

Price

PET 20

20mm

£0.84

PET 32

32mm

£0.88

PET 40

40mm

£1.29

PET 50

50mm

£1.86

PET 63

63mm

£3.45

PET 75

75mm

£6.71

PET 90

90mm

£11.30

Female Branch Tee

Ref

Size

Price

PMB 324

32mm x 1” x 32mm

£2.31

PMB 325 32mm x 1 1/4” x 32mm

£1.42

PMB 504

£2.31

50mm x 1” x 50mm

Ref

Size

Price

Ref

Size

Price

PMB 506 50mm x 1 1/2” x 50mm

£2.38

PFB 202

20mm x 1/2” x 20mm

£1.67

PRT 322

32mm x 20mm x 32mm

£1.19

PMB 638

£4.72

PFB 324

32mm x 1” x 32mm

£2.35

PRT 403

40mm x 32mm x 40mm

£1.25

PRT 503

50mm x 32mm x 50mm

£1.90

PRT 633

63mm x 32mm x 63mm

£4.26

PRT 635

63mm x 50mm x 63mm

£4.26

PRT 753

75mm x 32mm x 75mm

£6.71

PRT 755

75mm x 50mm x 75mm

£6.71

PRT 905

90mm x 50mm 90mm

£11.81

PRT 907

90mm x 75mm x 90mm

£11.81

45° Branch Tee

63mm x 2” x 63mm

Cross

Stop End Set Comes complete with rubber seal

Ref

Size

Price

PCS 20

20mm

£1.77

PCS 32

32mm

£4.02

PCS 50

50mm

£6.20

PCS 63

63mm

£8.07

PCS 75

75mm

£16.09

Ref

Size

Price

PES 201

20mm x 1/2”

£1.09

PES 32

32mm x 1”

£1.04

PES 40

40mm x 1 1/4”

£1.71

PES 50

50mm x 1 1/2”

£2.00

Ref

Size

Price

PPC 20

20mm

£0.67

PPC 32

32mm

£0.88

PPC 40

40mm

£1.09

Plain Cap

Reducing Cross

Ref

Size

Price

PBT 32

32mm

£4.19

PBT 50

50mm

£6.41

PBT 63

63mm

£10.07

PBT 75

75mm

£16.14

Please Note: All prices exclude VAT

PPC 50

50mm

£1.35

Ref

Size

Price

PPC 63

63mm

£2.27

PES 20

50mm x 32mm

£6.20

PPC 75

75mm

£4.74


98

Double Union Ball Valve

Union

Threaded Cap and Seal

Ref

Size

Price

Ref

Size

Price

PTC 050

1/2”

£0.46

PUN 20

20mm x 20mm

£2.56

PTC 075

3/4”

£0.51

PUN 32

32mm x 32mm

£4.06

PTC 100

1”

£0.51

PUN 40

40mm x 40mm

£4.72

PTC 125

1 1/4”

£0.78

PUN 50

50mm x 50mm

£4.91

PTC 150

1 1/2”

£1.40

PUN 63

63mm x 63mm

£7.91

PTC 200

2”

£2.56

PUN 75

75mm x 75mm

£21.87

PTC 250

2 1/2”

£6.09

PUN 90

90mm x 90mm

£31.30

PTC 300

3”

£9.46

Ref

Size

Price

PDV 75

75mm

£69.30

PDV 90

90mm

£92.60

Ref

Size

Price

PDV 32

32mm

£3.37

Drain Valve

Single Union Ball Valve

Male Threaded Union

Size

Price

PMU 20

20mm x 1/2”

£2.97

PMU 32

32mm x 1”

£4.66

PMU 50

50mm x 1 1/2”

£5.68

PMU 63

63mm x 2”

£9.27

Extended Socketed Union

Ref

Size

Price

PBV 20

20mm

£3.90

PBV 32

32mm

£5.20

PBV 40

40mm

£8.10

PBV 50

50mm

£10.80

PBV 63

63mm

£17.60

Tank Connector

Ref

Size

Price

PSU 32

32mm

£2.82

32mm Pipe Filter Attaches inside the extended socket union (above).

Methylene chloride cleaning solution. Should be applied to all connections with a cloth before applying adhesive.

Ref

Size

Price

Ref

Size

Price

PTC 001

3/4” x 20mm/25mm

£8.85

PCF 01

250ml (1/4ltr)

£5.05

PTC 002

1” x 25mm/32mm

£9.53

PCF 02

650ml (2/3ltr)

£9.75

PTC 003

1 1/4” x 32mm/40mm

£10.63

Ref

Size

Price

PTC 004

1 3/4” x 40mm/50mm

£12.75

PPF 32

32mm

£0.52

PTC 005

2” x 50mm/63mm

£14.42

Female Threaded Union

PVC Cleaning Fluid

Solvent Weld for PVC Pipe & Fittings All sizes come with an application brush attached to the cap

Threaded Tank Connector

Type 914 glue is only suitable for pipe and fittings up to 32mm

Ref

Size

Price

PFU 32

32mm x 1”

£4.66

Ref

Size

Price

Ref

Size

Type

Price

PFU 40

40mm x 1 1/4”

£5.51

PTT 075

3/4” x 3/4”

£8.08

PPA 01

100ml

914

£4.95

PFU 50

50mm x 1 1/2”

£5.81

PTT 100

1” x 1”

£8.74

PPA 02

1/4ltr

S3

£11.50

PFU 63

63mm x 2”

£9.36

PTT 200

2” x 2”

£13.17

PPA 03

1ltr

S3

£33.45

IRRIGATION AND WATER STORAGE

Ref


99

WRC Approved Blue

PE100 Pipe - Black

All PE100 is guaranteed for 10 years with a life of 50 years. PE100 has increased tensile strength, water hammer resistance, floor capacity and stretch resistance over PE80. Approved for recycled and non re-potable water. Other sizes available on request.

Blue MDPE 12.5bar pipe is WRC approved and conforms to BS 6572 SPEC S.D.R11. Suitable for potable water supplies. Larger sizes available on request.

SIZE Ref

O/D

Length

Price

MDP 007

32mm

50m

£55.00

Ref

O/D

Length

Price

MDP 008

32mm

100m

£110.00

MDP 001

20mm

50m

£42.50

MDP 009

50mm

50m

£140.50

MDP 002

25mm

50m

£55.50

MDP 010

50mm

100m

£281.00

MDP 003

32mm

50m

£94.00

MDP 011

63mm

50m

£199.50

MDP 012

63mm

100m

£399.00

SIZE

Spacing Blocks For Clamps Simply attaches to base our pipe clamps (above). Ideal when you have ball valves and unions in your pipework.

Pipe Clamps

IRRIGATION AND WATER STORAGE

16-32mm - No Clip 40-75mm Clip Included Ref

Size

Price

PPC 161

16mm

£0.40

PPC 201

20mm

£0.47

PPC 321

32mm

£0.66

PPC 401

40mm and Clip

£0.95

PPC 501

50mm and Clip

£1.10

PPC 631

63mm and Clip

£1.50

PPC 751

75mm and Clip

£2.61

Ref

Size

Price

PPS 321

32mm

£0.34

PPS 401

40mm

£0.50

PPS 501

50mm

£0.56

PPS 631

63mm

£0.78

PPS 751

75mm

£1.32

Polypropylene Reducing Bush

Saddle Clamps Clamp around your metric pipe, drill through the outlet, then connect your take-off connection. Ref

Size

Price

Ref

Size

Price

PRB 01

3/4” x 1/2” BSP

£0.23

SAD 202

20mm x 1/2” Female BSP

£2.43

PRB 02

1” x 1/2” BSP

£0.32

SAD 252

25mm x 1/2” Female BSP

£2.43

PRB 03

1” x 3/4” BSP

£0.32

SAD 253

25mm x 3/4” Female BSP

£2.43

PRB 04

1 1/4” x 3/4” BSP

£0.47

1 1/4” x 1” BSP

£0.47

SAD 322

32mm x 1/2” Female BSP

£3.04

PRB 05

SAD 323

32mm x 3/4” Female BSP

£3.04

PRB 06

1 1/2” x 1” BSP

£0.57

SAD 503

50mm x 3/4” Female BSP

£4.05

PRB 07

2” x 1/2” BSP

£1.10

SAD 504

50mm x 1” Female BSP

£4.05

PRB 08

2” x 3/4” BSP

£1.10

SAD 636

63mm x 1 1/2” Female BSP

£6.62

PRB 09

2” x 1” BSP

£1.10

PRB10

2” x 1 1/2” BSP

£1.10

Please Note: All prices exclude VAT


Straight Coupler

Female Adaptor

Stop Cock Quarter Turn on/off

Ref

Size

Price

Ref

Size

Price

Ref

Size

Price

CSC 20

20mm x 20mm

£1.60

CFA 20

20mm x 1/2”

£1.15

CST 20

20mm x 20mm

£7.00

CSC 25

25mm x 25mm

£2.10

CFA 25

25mm x 3/4”

£1.25

CST 25

25mm x 25mm

£9.25

CSC 32

32mm x 32mm

£2.75

CFA 32

32mm x 1”

£1.95

CST 32

32mm x 32mm

£14.30

CSC 50

50mm x 50mm

£5.30

CFA 50

50mm x 11/2”

£3.90

CST 50

50mm x 50mm

£18.50

CSC 63

63mm x 63mm

£7.30

CFA 63

63mm x 2”

£5.45

CST 63

63mm x 63mm

£24.50

End Plugs

Male Adaptor

Equal Elbow

Ref

Size

Price

Ref

Size

Price

Ref

Size

Price

CMA 20

20mm x 1/2”

£0.89

CES 20

20mm

£0.94

CEE 20

20mm x 20mm 90°

£1.65

CMA 25

25mm x 3/4”

£1.15

CES 25

25mm

£1.25

CEE 25

25mm x 25mm 90°

£2.15

CMA 32

32mm x 1”

£1.60

CES 32

32mm

£1.65

CEE 32

32mm x 32mm 90°

£2.65

CMA 50

50mm x 11/2”

£3.25

CES 50

50mm

£3.60

CEE 50

50mm x 50mm 90°

£6.05

CMA 63

63mm x 2”

£5.30

CES 63

63mm

£4.80

CEE 63

63mm x 63mm 90°

£7.85

Female Branch Tee

Universal Transition Coupler

Female Threaded Elbow

Ref

Size

Price

Ref

Size

Price

Ref

Size

Price

CFT 20

20mm x 1/2”

£1.80

CFE 20

20mm x 1/2”

£1.40

CUC 201

15-22mm x 20mm

£7.44

CFT 25

25mm x 1”

£2.00

CFE 25

25mm x 3/4”

£1.65

CUC 202

21-27mm x 20mm

£16.30

CFT 32

32mm x 1”

£3.15

CFE 32

32mm x 1”

£2.75

CUC 251

15-22mm x 25mm

£7.77

CFT 50

50mm x 2”

£7.20

CFE 50

50mm x 11/2”

£6.75

CUC 252

21-27mm x 25mm

£10.72

CFT 63

63mm x 2”

£10.80

CFE 63

63mm x 2”

£8.95

CUC 253

27-35mm x 25mm

£10.02

CUC 321

21-27mm x 32mm

£9.53

CUC 322

27-35mm x 32mm

£10.61

CUC 323

35-50mm x 32mm

£26.90

Plastic Pipe Stiffener

Wall Plate Elbow

For use with blue MDPE pipe only Ref

Size

Price

Ref

Size

Price

CET 20

20mm x 20mm x 20mm

£2.45

CPI 20

20mm

£0.88

CET 25

25mm x 25mm x 25mm

£3.00

CPI 25

25mm

£1.05

CET 32

32mm x 32mm x 32mm

£4.90

CPI 32

32mm

£1.35

Ref

Size

Price

CET 50

50mm x 50mm x 50mm

£8.95

CPI 50

50mm

£2.05

CWP 20

20mm x 1/2”

£4.10

CET 63

63mm x 63mm x 63mm

£12.10

CPI 63

63mm

£2.30

CWP 25

25mm x 3/4”

£4.65

IRRIGATION AND WATER STORAGE

Variable size inlet will fit any type of pipe.

Equal Tee

100


101

Brass Quick Couplings (Bayonett) Hose Tail

Female Threaded

Male Threaded

Ref

Size

Price

Ref

Size

Price

QCH 50

1/2”

£2.50

QCF 50

1/2”

£2.45

QCM 50

1/2”

£2.45

QCH 75

3/4”

£2.57

QCF 75

3/4”

£2.51

QCM 75

3/4”

£2.52

QCH 100

1”

£3.10

QCF 100

1”

£2.63

QCM 100

1”

£2.63

QCH 125

1 1/4”

£3.90

QCF 125

1 1/4”

£3.45

QCM 125

1 1/4”

£3.23

Ref

Size

Price

QCH 150

1 1/2”

£5.12

QCF 150

1 1/2”

£4.25

QCM 150

1 1/2”

£3.99

QCY 001

Universal

£11.61

Hose Coupling

Size

Price

QCC 50

1/2”

£4.35

QCC 75

3/4”

£4.95

Ref QCV 001

Size 3/4”

Size

Price

Universal seal

Cap

Water Stop Valve

Ref

Ref

‘Y’ Connection

Price £17.45

Ref QCC 001

Size Universal

Price

Ref

Size

Price

£2.59

QCS 001

Universal

£0.26

IRRIGATION AND WATER STORAGE

Brass Click-Fit Connectors Female Click Fit Adaptor

Ref CFA 75

Size 3/4” F

Male Click Fit Adaptor

Price £1.70

Click-Fit Double Male Connector

Ref CMA 75

Size 3/4” M

Click-Fit Hose End Adaptor

Click-Fit Hose Joiner

Ref

Size

Price

Price

CHC 50

1/2”

£4.58

£1.65

CHC 75

3/4”

£5.50

2 Way Tap Outlet

Female Hose Tail

Ref

Size

Price

CHJ 50

1/2”

£3.80

CHJ 75

3/4”

£4.90

Male Hose Tail

Ref

Size

Price

Ref

Size

Price

FHT 50

1/2”

£1.58

MHT 50

1/2”

£1.58

3/4”

£2.39

MHT 75

3/4”

£2.97

Ref

Size

Price

Ref

Size

Price

FHT 75

CMC 01

3/4” M

£2.00

CDT 75

1/2”

£14.20

FHT 100

1”

£3.25

MHT 100

1”

£3.20

FHT 150

1 1/2”

£9.97

MHT 150

1 1/2”

£10.94

FHT 200

2”

£14.24

MHT 200

2”

£15.98

Please Note: All prices exclude VAT


Soft Rain Lances Aluminium lances complete with metal valve and rose

102

Industrial Spray Pistol

1/2” Female BSP Connection

Max Output of 50 l/min Inlet: Quick coupling (3/4” Male BSP) Outlet: Threaded 3/4” Male BSP Ref

Description

Price

LAN 001

40cm Soft Rain Lance

£31.00

LAN 002

60cm Soft Rain Lance

£32.80

LAN 003

90cm Soft Rain Lance

£35.10

Ref

Description

Price

LAN 004

120cm Soft Rain Lance

£38.70

LAN 15

Spray Pistol

£39.80

Trigger Lances

Adjustable Metal Spray Gun

Aluminium trigger lance Outlet: Threaded 3/4” Male Inlet: Threaded 3/4” Female

NOTE: Hose connection and rose not supplied.

Hose Connection: Click fit Material: Zamac Colour: Grey / Black Inlet: 3/4” FBSP with click-fit connection

Ref

Description

Price

LAN 010

40cm Trigger Lance

£27.40

LAN 011

60cm Trigger Lance

£29.10

LAN 012

90cm Trigger Lance

£31.40

Ref

Description

Price

LAN 013

120cm Trigger Lance

£35.30

LAN 16

Metal Spray Gun

£7.50

Heavy Duty Hose Pipe Flexible PVC braided hose. Extremely hard wearing, anti-kink hose. Used by professional landscapers, plant nurseries and garden centres. Ref

Inside Diam.

Coil Length

Price

THA 025

1/2” (12.5mm)

25m

£24.95

THA 050

1/2” (12.5mm)

50m

£49.90

THA 100

1/2” (12.5mm)

100m

£99.80

THB 025

3/4” (19mm)

25m

£41.25

THB 050

3/4” (19mm)

50m

£82.30

THB 100

3/4” (19mm)

100m

£165.00

THC 025

1” (25mm)

25m

£66.79

THC 050

1” (25mm)

50m

£124.67

THC 100

1” (25mm)

100m

£249.33

Roses 1

2

Best Seller

3

4

5

PICTURE

Ref

Description

Price

1

ROS 001

Small Alloy Rose - 3/4” Female BSP connection

£9.40

2

ROS 002

BEST SELLER - Large Alloy Rose - 3/4” Female BSP connection

£6.35

3

ROS 003

Large Plastic Rose - 3/4” Female BSP connection

£4.85

4

ROS 004

Ball Valve for Metal Soft Rain Lance

£5.50

5

ROS 005

Brass Shower Rose - 3/4” Female BSP connection

£37.00

IRRIGATION AND WATER STORAGE

Pressure rating (under constant pressure): ½” = 10 bar ¾” = 8 bar 1” = 7 bar Max temperature: 60°C


103

1” Large Hose Trolley

Wall Mounted Hose Reel

Capacity: Over 150mtr of 3/4” hoseOver 100m of 1” hose Max Pressure: 10 Bar Inlet / Outlet: Universal bayonet (Geka) coupling Frame: Powder coated steel frame PVC reel axle pneumatic wheels Dimensions: 70cm W 110cm D 110cm H

For hose pipe see page 102

Ref

Price

Ref

Price

HRT 001

£269.00

HRT 005

£99.00

3/4” Hose Trolley

1/2” Hose Trolley

IRRIGATION AND WATER STORAGE

Capacity: Up to 60mtr of 1/2” ID hose Max Pressure: 10 Bar Inlet: Click-Fit hose adaptor Outlet: 1/2” Brass hose-tail Frame: Powder coated steel frame, PVC reel axle Dimensions: 36cm W x 40cm D x 45cm H Mounting Holes: 180mm x 100mm

Capacity: Up to 80mtr of 1/2” ID hose Max Pressure: 10 Bar Inlet: Male garden hose QR adaptor Outlet: 3/4” Male BSP hose connection Frame: Powder coated steel frame PVC reel axle, solid wheels Dimensions: 50cm W x 50cm D x 75cm H

1” Hose Trolley

Capacity: Up to 80mtr of 3/4” ID hose Max Pressure: 10 Bar Inlet: Male garden hose QR adaptor Outlet: 3/4” Male BSP hose connection Frame: Powder coated steel frame PVC reel axle, solid wheels Dimensions: 60cm W x 55cm D x 80cm H

Capacity: 50 metre of 1” ID hose Max Pressure: 10 Bar Inlet: QRC with 1” hose barb Outlet: 1” Male BSP hose connection Frame: Powder coated steel frame PVC reel axle, solid wheels Dimensions: 75cm W x 60cm D x 90cm H

Ref

Price

Ref

Price

Ref

Price

HRT 002

£125.00

HRT 003

£158.00

HRT 004

£210.00

Please Note: All prices exclude VAT


Hose Pour Tap

Brass Gate Valve

Metal Ball Valve (full flow)

104

Stainless Steel Handle. PTFE Seal.

Outlet thread size with hosetail removed, 3/4” 1” and 1¼”.

Ref

Size

Price

BGV 050

1/2” F BSP

£4.36

Ref

Size

Price

BGV 075

3/4” F BSP

£6.33

MBV 050

½" F BSP

£7.80

BGV 100

1” F BSP

£8.45

MBV 075

¾" F BSP

£11.60

Ref

Inlet

Hose Tail

Price

BGV 125

1 1/4” F BSP

£13.63

MBV 100

1" F BSP

£15.48

HPT 050

½" M BSP

1/2”

£8.40

BGV 150

1 1/2” F BSP

£17.28

MBV 125

1¼" F BSP

£27.71

1½" F BSP

£38.46

2" F BSP

£39.21

HPT 075 ¾" M BSP

3/4”

£11.72

BGV 200

2” F BSP

£25.84

MBV 150

HPT 100 1" M BSP

1”

£20.00

BGV 300

3” F BSP

£63.99

MBV 200

Brass Check / Non Return Valve

Brass Foot Valve

Size

Price

BCV050

½" F BSP

£5.40

BCV075

¾" F BSP

£7.45

Ref

Size

Price

BCV100

1" F BSP

£10.00

BFV100

1" F BSP

£13.00

BCV125

1¼" F BSP

£15.80

BFV150

1½" F BSP

£28.80

BCV150

1½" F BSP

BFV200

2" F BSP

£40.00

BCV200

2" F BSP

Ref

Size

Price

£23.60

MAN 235

2-Way Tap Outlet

£15.50

£33.50

MAN 375

3-Way Tap Outlet

£16.00

1” Female Pressure Regulator

3/4” Female Adjustable Pressure Regulator

Inlet diameter: ¾” BSP Female Outlet diameter: ¾” BSP Male Pressure Range: 0.8- 2.5atm Flow Rate Range: 0.2 – 5m3/hr

Inlet diameter: 1” BSP Female Outlet diameter: 1” BSP Male Pressure Range: 1- 2atm Flow Rate Range: 0.4 – 8m3/hr

Other pressures available

Other pressures available

1½” Female Pressure Regulator

Inlet diameter: 1½” BSP Female Outlet diameter: 1½” BSP Male Rec Pressure Range: 1.5- 3.5atm Rec Flow Rate Range: 0.5 –18m3/hr Other pressures available

Ref

Size

Price

Ref

Size

Price

Ref

Size

Price

APR 075

3/4” Regulator

£11.40

APR 100

1” Regulator

£29.00

APR 150

1 ½” Regulator

£68.00

IRRIGATION AND WATER STORAGE

Ref

Brass Foot Valve


105

Heron Mi Irrigation Controllers

Features: Industrial quality controllers with exceptional reliability for the demanding commercial environment. Operates up to 4,8,12 or 16 valves depending on controller. Superb range of software, loaded with innovative features which can be customised to meet your needs. Valves can be individually named. Create irrigation programs, running any valve in any order. Run up to 6 valves in parallel. Large display and menu driven operation. Integrable with light and moisture sensors and dosing systems.

IRRIGATION AND WATER STORAGE

Galcon 8100-GQ

Ref

Description

Price

HMI 004

4 Valve Heron Controller

£217.35

HMI 008

8 Valve Heron Controller

£273.00

HMI 012

12 Valve Heron Controller

£331.80

HMI 016

16 Valve Heron Controller

£392.70

HLS 001

Heron Light Sensor

£178.50

HMS 002

Heron Moisture Sensor

£131.00

Low Voltage Multi-Core Cable Widely used for wiring 24vAC solenoid valves to your control panel. The orange cable crimps (below) can be used to connect to your solenoid valves. For above ground use.  If buried then feed through a suitable conduit e.g. 20mm PVC pipe (page 95).

Indoor controller 3 Programs A B C Plug in transformer supplied Duration: 1 minute - 4 hours. Start: Daily, 4 starts a day. Manual operation by program or individual valve. Operates the 24 v AC Bermad solenoid valves. Ref

Description

Price

IRT 004

4 Station Controller

£47.90

IRT 008

8 Station Controller

£51.60

Bermad Solenoid Valves

Max Working Pressure: 10 Bar Minimum Working Pressure: 0.7 Bar. Operating Current: 24vAC Normally closed design (closes when no power) Replacement coils for Bermad: 24vAC solenoid valves: 24v | 125 Ma | 1.7W

Ref

No. Cores

Roll Length

Price

LVC 006

6 Core

100m

£95.10

LVC 010

10 Core

100m

£173.30

LVC 014

14 Core

100m

£233.20

LVC 020

20 Core

100m

£331.60

Grease Filled Crimps

Ref

Description

Price

BSV 075

3/4" Female BSP Inlet / Outlet

£17.30

BSV 100

1" Female BSP Inlet / Outlet

£17.30

BSV 150

1 1/2" Female BSP Inlet / Outlet

£48.00

BSV 200

2" Female BSP Inlet / Outlet

£53.60

BSV 024

24v AC Replacement Coil

£8.90

Please Note: All prices exclude VAT

Operating temperature: -15°C to 70°C Outer sheath: Fire retardant PVC Max operating voltage: 150v Outer sheath colour: Grey Core material: Copper Core diameter: 0.8mm Core insulation: PVC

Handy grease filled cable connectors for low voltage cable. Simply crimps shut using pliers.

Ref

Description

Price

GFC 001

Grease Filled Connector

£0.37


Dial Control Timer

106

Valve Boxes

• 63 preset programs (plus off and 5-minute test). • Easy programming by way of 2 dials: one with

VCB 001

7 watering cycles, the other with 9 watering times.

• Ideal for gardeners who find digital timers too complicated.

• Electronic components are perfectly sealed. • Supplied with 1/2” hose connector. Ref

Price

BOT 01

£40.83

No. of Lines

Power

Pressure

Inlet

Outlet

Single

1 x 9v Battery

0.2 to 12 bar

3/4” Female BSP

1/2” Male BSP

VCB 002

Digital Control Timer

• 3 programming buttons and easy to read digital screen.

• 2 daily watering cycles of varying lengths ranging from 1 minute to a max of 23hr and 59 mins.

• Weekly watering cycles may also be programmed

(and stored) with the exception of the days you wish to omit. • Display clearly denotes all information by means of easy to understand symbols and numbers. • Electronic components are perfectly sealed. • Supplied with 1/2” hose connector. Ref

Price

BOT 01

£49.16

Power

Pressure

Inlet

Outlet

Single

1 x 9v Battery

0.1 to 12 bar

3/4” Female BSP

1/2” Male BSP

Dual Outlet Timer

• Two-way irrigation timer with up to three irrigation cycles a day for each of the two irrigation lines.

• Each watering cycle can have varying lengths from 1 minute to 23hr 59mins.

• Features three buttons for easy programming and a

large display that clearly shows information through simple symbols and numbers. • Electronic components are perfectly sealed. • Supplied with 1/2” hose connector. Ref

Price

BOT 03

£74.16

No. of Lines

Power

Pressure

Inlet

Outlet

Twin

1 x 9v Battery

0.1 to 12 bar

3/4” Female BSP

1/2” Male BSP

These valve boxes are designed to provide ample space and superior durability. They can accommodate a wide range of equipment, manual drain valves, isolation controllers, irigation manifoulds and much more. Secure tops ensure anti-theft and anti- vandalism. Green-colored lid blends in with dark- colored landscape features. UV inhibitors protect box from fading, warping and cracking. Ref

Description

Price

VCB 001

10” Circular Valve Box D 22cm H 25cm

£6.60

VCB 002

12” Standard Box W 22cm H 30cm L40cm

£20.70

VCB 003

Jumbo Box W 30cm H 30cm L 48cm

£37.00

Inline Timer Up to 6 irrigation cycles per day from 1min to 23rs 59mins. 100% sealed lid and will work in total submersion. Electronic section can be removed from the valve for easy programing and winter storage. Can be installed horizontaly or verticaly above ground or below. Ref

Size

Price

BOT 04

1” FBSP Inlet/Outlet

£74.16

IRRIGATION AND WATER STORAGE

No. of Lines

VCB 003


107

Water Filters TAGLINE Filters TAGLINE filters are made from high quality engineered plastic materials providing excellent mechanical strength and durability. Amiad’s TAGLINE filters are easy to maintain; no tools are needed for extracting the filter element from the filter housing for rinsing. Interchangeable filter elements are available to suit a range of filtration degrees. 3/4” Male Filter

1” Male Filter

1 1/2” Male Filter

IRRIGATION AND WATER STORAGE

Micron

mm

For Use With

155

100

0.1

Drip / Trickle

75

200

0.2

Mist and Spray

30

500

0.5

Sprinklers

Ref

Flow

Description

Price

PWF 075

3 m /h

3/4" Male Filter - Including 130 Micron Cartridge

£6.20

3

FCA 075

-

100 Micron Replacement Cartridge

£8.80

FCB 075

-

200 Micron Replacement Cartridge

£8.80

FCC 075

-

500 Micron Replacement Cartridge

£8.80

Ref

Flow

Description

Price

PWF 100

7 m /h

1" Male Filter - Including 130 Micron Cartridge

£7.30

FCA 100

-

100 Micron Replacement Cartridge

£25.50

FCB 100

-

200 Micron Replacement Cartridge

£25.50

FCC 100

-

500 Micron Replacement Cartridge

£25.50

Ref

Flow

Description

Price

PWF 150

2” Male Filter

Mesh

3

15 m /h 11/2" Male Filter - Including 130 Micron Cartridge £41.80 3

FCA 150

-

100 Micron Replacement Cartridge

£48.60

FCB 150

-

200 Micron Replacement Cartridge

£48.60

FCC 150

-

500 Micron Replacement Cartridge

£48.60

Ref

Flow

Description

Price

PWF 200

25 m /h

2" Male Filter - Including 130 micron cartridge

£82.50

FCA 200

-

100 Micron Replacement Cartridge

£85.00

FCB 200

-

200 Micron Replacement Cartridge

£85.00

FCC 200

-

500 Micron Replacement Cartridge

£85.00

3

Sand Filters Sand filters are employed for the effective filtration of algae, especially where large volumes of stored water are subject to daylight, such as lagoons and large open tank systems. Filtration is carried out through a deep bed of aggregate (course sand/fine gravel). The degree of filtration largely depends upon the size of the aggregate particles and the depth of the filtration bed i.e. fine aggregate for drip systems and course aggregate for sprinklers.  Water enters through the top inlet where it’s sprayed over the top layer of the sand/aggregate.  As it percolates through the filtration media any organic material is trapped and clean water exits from the bottom of the tank.  Finally, the clean water passes through a secondary screen filter to remove any broken-down sand particles that may have escaped.  As the filtration media becomes clogged with organic matter over time, the system is temporarily backflushed by reversing the flow of water.  Any trapped organic matter is released and rises above the heavier aggregate to be flushed out of a top waste exit.  This process can be carried out automatically when a pressure differential is reached between the inlet and outlet pressures, and is also backed up with a time based backflush.   Sand filter arrays (several tanks abreast) can be installed where larger flow rates are required and to allow individual tank backflushing without interrupting the irrigation cycle.  Arrays can also be mounted on metal skids for use on remote sites such as field irrigation. Flow rates available from 100 ltr/min to 1,400 ltr/min, with 1” BSP to 4” flanged connections. Price on application


108

Fertiliser and Chemical Injectors For your crops: Exactly the right dose, when and where needed. For your personnel: Less handling of concentrates Precise dosing: Avoid waste The dispenser is completely hydraulic - needs no electrical connections. Set it, leave it - needs no further attention The dispenser is easily installed in the water line

1

2

3

4

7

8

Best Seller

5

Best Seller

6

Units for General Fertiliser Use Image

Ref

Model

Flow rate (ltr/hr)

Dose Range (%)

Operating Pressure

Connections

Price

1

DOS 01

DO7RE125

5-700

0.15-1.25

0.3-6.0 bar

3/4” Male BSP

£287.00

2

DOS 02

D3GL3 (Greenline)

10-3,000

0.2-2.0

0.3-6.0 bar

3/4” Male BSP

£318.00

3

DOS 03

D3RE5

10-3,000

0.5-5.0

0.3-6.0 bar

3/4” Male BSP

£472.00

4

DOS 04

D45RE1.5

100-4,500

0.2-1.5

0.5-5.0 bar

1 1/4” Male BSP

£483.00

5

DOS 05

D8RE2

500-8,000

0.2-2.0

0.15-8.0 bar

11/2” Male BSP/50mm

£748.00

6

DOS 06

D20S

1,000-20,000

0.2-2.0

0.12-10.0 bar

2” Male BSP/63mm

£1,578.00

7

DOS 07

D30S TURBO

10,000-30,000

0.25-1.25

1.0-8.0 bar

2” M x F BSP

£1,680.00

8

DOS 12

Two-Wheeled Trolley with 25ltr Barrel and D3GL3 (Greenline)

£494.00

White (PVDF Body) Units Suitable for Nitric Acid (30%) Image

Ref

Model

Flow rate (ltr/hr)

Dose Range (%)

Operating Pressure

Connections

Price

-

DOS 08

DO7RE125

5-700

0.15-1.25

0.3-6.0 bar

3/4” Male BSP

£310.00

-

DOS 09

D3RE2

10-3,000

0.2-2.0

0.3-6.0 bar

3/4” Male BSP

£422.00

-

DOS 10

D3RE5

10-3,000

0.5-5.0

0.3-6.0 bar

3/4” Male BSP

£562.00

-

DOS 11

D45RE1.5

100-4,500

0.2-1.5

0.5-5.0 bar

1 1/4” Male BSP

£671.00

IRRIGATION AND WATER STORAGE

If you require the pipe and fittings to create a bi-pass please call 01282 873120


109

Jet Pumps Self-priming centrifugal pump with excellent suction capacity even when there are air bubbles. Particularly suitable for water supply in domestic installations, small-scale agriculture, gardening and wherever self-priming operation is necessary.

Ref

Model

Max Ipm

Max Pressure BAR

Volts

HP (kW)

Inlet size

Outlet size

Price

PUM 001

Jet 82 M

50

4.5 bar

230

0.8 (0.59)

1” FBSP

1” FBSP

£135.08

PUM 002

Jet 122 M

60

5.4 bar

230

1.2 (0.89)

1” FBSP

1” FBSP

£157.81

PUM 003

Jet 202 M

160

5.4 bar

230

2 (1.47)

1 1/2” FBSP

1 1/4” FBSP

£330.00

Booster Pumps

STAINLESS STEEL Automatic water lifting units, suitable for domestic use, small installations for civil, agricultural, industrial use, washing and hobby applications.

IRRIGATION AND WATER STORAGE

The unit is equipped with a stainless steel self priming pump, vessel, pressure switch for automatic operation, pressure gauge, connecting hose, all pre-assembled.

Ref

Model

Max Ipm

Max Pressure BAR

Volts

HP (kW)

Vessel Size

Inlet size

Outlet Size

Price

PUM 010

JEX182M

40

4.2 bar

230

1

20ltr

1” FBSP

1” FBSP

£236.46

PUM 011

JEX100M

50

4.9 bar

230

1

20ltr

1” FBSP

1” FBSP

£245.72

PUM 012

JEX122M

60

5.4 bar

230

1.2

20ltr

1” FBSP

1” FBSP

£281.90

Submersible Pumps for Drainage Water PUM016

PUM017

PUM018

PUM019

Submersible pumps are designed for basement drainage, cesspit water removal, ponds and fountains. Their com pact design makes storing and use easy, with little maintenance required and are supplied with standard power cable. Ref

Model

Max lpm

Max Lift (mtr)

Volts

Operation

Cable Length

Outlet Size

Particle Size

Drain Depth

Price

PUM 016

L60

175

10

230

Manual

10mtr

1 1/4" FBSP

CLEAN

2mm

£177.00

PUM 017 TF400/S

140

5.9

230

Automatic

10mtr

1 1/4" FBSP

25mm

40mm

£126.00

PUM 018 TF1000/S

240

10.8

230

Automatic

10mtr

1 1/4" FBSP

30mm

40mm

£156.00

PUM 019 100VOX

350

10

230

Automatic

10mtr

1 1/4" FBSP

30mm

40mm

£342.85

Please Note: All prices exclude VAT


110

MKV Multistage

Single phase, centrifugal pump ideal for pressure sets, sprinkler and irrigation systems. Liquid quality requirements: Clean, free from solids or abrasive sub stanc es, non-viscous, non-aggressive, non-crystallized, chemically neutral, close to the characteristics of water. Motor Protection: IP 55 Insulation Class: F

Ref

Model

Max lpm

Max Pressure

Volts

HP (kW)

Inlet Size

Outlet Size

Price

PUM 025

MVK 9/05M

200

5.8 bar

230

1.5 (1.11)

1 1/2" FBSP

1 1/4" FBSP

£373.96

PUM 026

MKV 9/07M

200

8 bar

230

2.5 (1.86)

1 1/2" FBSP

1 1/4" FBSP

£458.05

Pressure Vessels 2 1

3

2

Image

Ref

Description

Outlet Size

Pressure

Price

1

PUM 041

20ltr Varaem Horizontal

1” Male BSP

10 Bar

£34.80

1

PUM 042

60ltr Varaem Horizontal

1” Male BSP

10 Bar

£117.30

1

PUM 043

100ltr Varaem Horizontal

1” Male BSP

10 Bar

£196.70

1

PUM 044

200ltr Varaem Horizontal

1” Male BSP

10 Bar

£474.00

2

PUM 045

20ltr Varaem Vertical

1” Male BSP

10 Bar

£30.90

2

PUM 046

60ltr Varaem Vertical

1” Male BSP

10 Bar

£113.20

2

PUM 047

100ltr Varaem Vertical

1” Male BSP

10 Bar

£192.50

2

PUM 048

200ltr Varaem Vertical

1” 1/2” Male BSP

10 Bar

£324.00

3

PUM 030

19-25ltr Replacement Membrane

-

£19.40

3

PUM 031

50-60ltr Replacement Membrane

-

£57.00

3

PUM 032

100ltr Replacement Membrane

-

£72.70

3

PUM 033

200ltr Replacement Membrane

-

£139.30

IRRIGATION AND WATER STORAGE

All our Varem pressure vessel have butyl, replaceable, membranes, All pressure vessels are supplied with stainless steel bottom flanges and have WRAS approval for potable water applications. Vessels are supplied pre-charged with air, but this pressure may require adjustment to suit the site conditions this adjustment must made with the vessel isolated from the system and before filling with water.


111

Steel Water Storage Tanks

IRRIGATION AND WATER STORAGE

Tank Diameter

Tank Height

Capacity

FEET

METRES

FEET

METRES

GALLONS

LITRES

6ft

1.83m

5ft

1.52m

880 gal

4,000 ltr

6ft

1.83m

7ft 6in

2.29m

1,320 gal

6ft

1.83m

10ft

3.05m

9ft

2.74m

5ft

9ft

2.74m

9ft

No. of Rings

Steel Kit REF

PRICE

2

WTS 062

£214.00

6,000 ltr

3

WTS 063

£303.00

1,760 gal

8,000 ltr

4

WTS 064

£383.00

1.52m

1,980 gal

9,000 ltr

2

WTS 092

£359.00

7ft 6in

2.29m

2,970 gal

13,500 ltr

3

WTS 093

£443.00

2.74m

10ft

3.05m

3,960 gal

18,000 ltr

4

WTS 094

£574.00

12ft

3.66m

5ft

1.52m

3,520 gal

16,000 ltr

2

WTS 122

£407.00

12ft

3.66m

7ft 6in

2.29m

5,280 gal

24,000 ltr

3

WTS 123

£583.00

12ft

3.66m

10ft

3.05m

7,040 gal

32,000 ltr

4

WTS 124

£708.00

15ft

4.57m

5ft

1.52m

5,500 gal

25,000 ltr

2

WTS 152

£504.00

15ft

4.57m

7ft 6in

2.29m

8,270 gal

37,500 ltr

3

WTS 153

£675.00

15ft

4.57m

10ft

3.05m

11,010 gal

50,000 ltr

4

WTS 154

£886.00

18ft

5.49m

5ft

1.52m

7,920 gal

36,000 ltr

2

WTS 182

£601.00

18ft

5.49m

7ft 6in

2.29m

11,890 gal

54,000 ltr

3

WTS 183

£808.00

18ft

5.49m

10ft

3.05m

15,850 gal

72,000 ltr

4

WTS 184

£1,130.00

21ft

6.4m

5ft

1.52m

10,790 gal

49,000 ltr

2

WTS 212

£700.00

21ft

6.4m

7ft 6in

2.29m

16,180 gal

73,500 ltr

3

WTS 213

£944.00

21ft

6.4m

10ft

3.05m

21,580 gal

98,000 ltr

4

WTS 214

£1,290.00

24ft

7.32m

5ft

1.52m

14,090 gal

64,000 ltr

2

WTS 242

£771.00

24ft

7.32m

7ft 6in

2.29m

21,140 gal

96,000 ltr

3

WTS 243

£1,169.00

24ft

7.32m

10ft

3.05m

28,180 gal

128,000 ltr

4

WTS 244

£1,508.00

27ft

8.23m

5ft

1.52m

17,830 gal

81,000 ltr

2

WTS 272

£873.00

27ft

8.23m

7ft 6in

2.29m

26,750 gal

121,500 ltr

3

WTS 273

£1,292.00

27ft

8.23m

10ft

3.05m

35,670 gal

162,000 ltr

4

WTS 274

£1,663.00

30ft

9.14m

5ft

1.52m

22,020 gal

100,000 ltr

2

WTS 302

£969.00

30ft

9.14m

7ft 6in

2.29m

33,030 gal

150,000 ltr

3

WTS 303

£1,406.00

30ft

9.14m

10ft

3.05m

44,040 gal

200,000 ltr

4

WTS 304

£2,070.00

36ft

10.97m

5ft

1.52m

31,710 gal

144,000 ltr

2

WTS 362

£1,297.00

36ft

10.97m

7ft 6in

2.29m

47,560 gal

216,000 ltr

3

WTS 363

£1,843.00

36ft

10.97m

10ft

3.05m

63,410 gal

288,000 ltr

4

WTS 364

£2,669.00

Please Note: All prices exclude VAT

Carriage may be charged to certain geographical locations


112

LINERS FOR STEEL TANKS Our tanks are a high quality, durable solution for the per manent or temporary storage of water, for use in hor ticulture, agriculture, fire-fighting, fish farming etc. Liners which are suitable for drinking water, effluent/slurry etc can also be supplied.

Options Rubber tank liners are available in two thicknesses, 0.75mm and 1.00mm. Although the 1.00mm liner is 1/3rd (33.33%) thicker than the 0.75mm liner it only costs around 10% more.

Construction Our tanks are supplied in kit form and are easy to construct with just two people. The steelwork kit in cludes all the necessary nuts, bolts, washers, anchor brackets and plastic capping.

Extras Please state the size of your required outlet holes when ordering your steel tank kit (if required). Take-off units (tank connectors) are not included.

Please call for a comprehensive quotation including all the Ideally, they should be erected on a smooth, level, con crete inlet and outlet fittings. Remember to check the size of base not less than 4” thick (depending on size), and 60cm your mains water supply pipe so we can quote the correct (2ft) greater in diameter than the tank. size of ball float-valve and brackets etc. Full instructions (with base preparations) available by The steel tank kit and the liners are sold separately. email. A range of covers are available to suit each installation – call our sales team for more information.

Tank Diameter

Tank Height

0.75mm Thick Liner

1.00mm Thick Liner

METRES

FEET

METRES

REF

PRICE

REF

PRICE

6ft

1.83m

5ft

1.52m

WTL 062

£161.00

WTL 062A

£176.00

6ft

1.83m

7ft 6in

2.29m

WTL 063

£210.00

WTL 063A

£229.00

6ft

1.83m

10ft

3.05m

-

-

WTL 064A

£303.00

9ft

2.74m

5ft

1.52m

WTL 092

£257.00

WTL 092A

£281.00

9ft

2.74m

7ft 6in

2.29m

WTL 093

£329.00

WTL 093A

£360.00

9ft

2.74m

10ft

3.05m

-

-

WTL 094A

£471.00

12ft

3.66m

5ft

1.52m

WTL 122

£297.00

WTL 122A

£325.00

12ft

3.66m

7ft 6in

2.29m

WTL 123

£374.00

WTL 123A

£410.00

12ft

3.66m

10ft

3.05m

-

-

WTL 124A

£528.00

15ft

4.57m

5ft

1.52m

WTL 152

£398.00

WTL 152A

£436.00

15ft

4.57m

7ft 6in

2.29m

WTL 153

£494.00

WTL 153A

£542.00

15ft

4.57m

10ft

3.05m

-

WTL 154A

£690.00

18ft

5.49m

5ft

1.52m

WTL 182

£516.00

WTL 182A

£566.00

18ft

5.49m

7ft 6in

2.29m

WTL 183

£631.00

WTL 183A

£693.00

18ft

5.49m

10ft

3.05m

-

-

WTL 184A

£870.00

21ft

6.4m

5ft

1.52m

WTL 212

£641.00

WTL 212A

£703.00

21ft

6.4m

7ft 6in

2.29m

WTL 213

£775.00

WTL 213A

£851.00

21ft

6.4m

10ft

3.05m

-

-

WTL 214A

£1,058.00

24ft

7.32m

5ft

1.52m

WTL 242

£777.00

WTL 242A

£853.00

24ft

7.32m

7ft 6in

2.29m

WTL 243

£931.00

WTL 243A

£1,023.00

24ft

7.32m

10ft

3.05m

-

-

WTL 244A

£1,259.00

27ft

8.23m

5ft

1.52m

WTL 272

£926.00

WTL 272A

£1,017.00

27ft

8.23m

7ft 6in

2.29m

WTL 273

£1,099.00

WTL 273A

£1,207.00

27ft

8.23m

10ft

3.05m

-

-

WTL 274A

£1,474.00

30ft

9.14m

5ft

1.52m

WTL 302

£1,087.00

WTL 302A

£1,194.00

30ft

9.14m

7ft 6in

2.29m

WTL 303

£1,279.00

WTL 303A

£1,406.00

30ft

9.14m

10ft

3.05m

-

-

WTL 304A

£1,702.00

36ft

10.97m

5ft

1.52m

WTL 362

£1,445.00

WTL 362A

£1,588.00

36ft

10.97m

7ft 6in

2.29m

WTL 363

£1,676.00

WTL 363A

£1,842.00

36ft

10.97m

10ft

3.05m

-

-

WTL 364A

£2,197.00

IRRIGATION AND WATER STORAGE

FEET


113

Steel Tank Covers Anti-Algae (Blackout) Covers Anti Algae tank covers are tailored to suit the size of each tank. Supplied with one inlet hood (extra inlet hoods £30.00 each)

Steel Tank With Anti-Algae Cover

A strengthened top seam sits on the top edge with a skirt tightly fitting around the top ring of the tank. Secured with adjustable straps that attach to the supplied eyebolts, this cover is an ideal solution where algae is a problem and the water needs to be protected from UV and wind borne debris. The anti algae cover allows rainwater to permeate through maximising the tank as a storage and collection facility. 18ft diameter covers and above are supplied with a central support pole.

Steel Tank With Steel Cover

IRRIGATION AND WATER STORAGE

Tank Diameter

Tank Height

Floating Covers These covers are fabricated from tough 400 micron PVC with integral flotation bubbles. They offer a cost effective deterrent to algae growth and debris built up in your tank. Our standard covers are supplied in diameters from 2.74m (9’) up to 10.97m (36’) but larger sizes are available. Steel Covers These ten degree sloping galvanised steel roofs come with a centre spinning and permanent centre support and an eaves access hatch with safety bars to deter unauthorised access to the tank. Net Covers

Floating Covers

Anti Algae Covers

Steel Covers

ft

mtrs

ft

mtrs

Ref

Prices

Ref

Price

Ref

Price

Ref

Price

9ft

2.74m

5ft

1.52m

COV 001

£90.00

COV 010

£50.00

WTA 092

£261.00

WTC 092

£771.00

9ft

2.74m

7ft 6in

2.29m

COV 001

£90.00

COV 010

£50.00

WTA 093

£261.00

WTC 093

£771.00

9ft

2.74m

10ft

3.05m

COV 001

£90.00

COV 010

£50.00

WTA 094

£261.00

WTC 094

£771.00

12ft

3.65m

5ft

1.52m

COV 002

£100.00

COV 011

£81.00

WTA 122

£316.00

WTC 122

£940.00

12ft

3.65m

7ft 6in

2.29m

COV 002

£100.00

COV 011

£81.00

WTA 123

£316.00

WTC 123

£940.00

12ft

3.65m

10ft

3.05m

COV 002

£100.00

COV 011

£81.00

WTA 124

£316.00

WTC 124

£940.00

15ft

4.57m

5ft

1.52m

COV 003

£120.00

COV 012

£130.00

WTA 152

£368.00

WTC 152

£1,147.00

15ft

4.57m

7ft 6in

2.29m

COV 003

£120.00

COV 012

£130.00

WTA 153

£368.00

WTC 153

£1,147.00

15ft

4.57m

10ft

3.05m

COV 003

£120.00

COV 012

£130.00

WTA 154

£368.00

WTC 154

£1,147.00

18ft

5.48m

5ft

1.52m

COV 004

£130.00

COV 013

£186.00

WTA 182

£613.00

WTC 182

£1,275.00

18ft

5.48m

7ft 6in

2.29m

COV 004

£130.00

COV 013

£186.00

WTA 183

£613.00

WTC 183

£1,275.00

18ft

5.48m

10ft

3.05m

COV 004

£130.00

COV 013

£186.00

WTA 184

£613.00

WTC 184

£1,275.00

21ft

6.40m

5ft

1.52m

COV 005

£160.00

COV 014

£254.00

WTA 212

£656.00

WTC 212

£1,789.00

21ft

6.40m

7ft 6in

2.29m

COV 005

£160.00

COV 014

£254.00

WTA 213

£656.00

WTC 213

£1,789.00

21ft

6.40m

10ft

3.05m

COV 005

£160.00

COV 014

£254.00

WTA 214

£656.00

WTC 214

£1,789.00

24ft

7.31m

5ft

1.52m

COV 006

£180.00

COV 015

£335.00

WTA 242

£742.67

WTC 242

£2,138.00

24ft

7.31m

7ft 6in

2.29m

COV 006

£180.00

COV 015

£335.00

WTA 243

£742.67

WTC 243

£2,138.00

24ft

7.31m

10ft

3.05m

COV 006

£180.00

COV 015

£335.00

WTA 244

£742.67

WTC 244

£2,138.00

30ft

9.14m

5ft

1.52m

COV 007

£200.00

COV 016

£521.00

WTA 302

£912.00

WTC 302

£3,588.00

30ft

9.14m

7ft 6in

2.29m

COV 007

£200.00

COV 016

£521.00

WTA 303

£912.00

WTC 303

£3,588.00

30ft

9.14m

10ft

3.05m

COV 007

£200.00

COV 016

£521.00

WTA 304

£912.00

WTC 304

£3,588.00

36ft

10.97m

5ft

1.52m

COV 008

£250.00

COV 017

£751.00

WTA 362

£1,120.00

WTC 362

£4,824.00

36ft

10.97m

7ft 6in

2.29m

COV 008

£250.00

COV 017

£751.00

WTA 363

£1,120.00

WTC 363

£4,824.00

36ft

10.97m

10ft

3.05m

COV 008

£250.00

COV 017

£751.00

WTA 364

£1,120.00

WTC 364

£4,824.00

Please Note: All prices exclude VAT


Pump Suction Hose

Ball Float Valve With Plastic Float

Internal Tank Strainers

114

Green medium duty suction hose with a reinforced PVC helix spiral. Suitable for the suction and discharge of fluids, waste water, effluent etc. Especially useful for connecting your water supply to your pump. Brass couplings on page 101. Ref

Size (ID)

Price Per Metre

PSH 100

1”

£4.90

PSH 125

1 1/4”

£5.50

Ref

Size

Price

Ref

Size

Price

PSH 150

1 1/2”

£7.28

ITS 200

2” x 1m

£11.25

BVF 002

3/4”

£19.50

PSH 200

2”

£10.34

ITS 300

3” x 1m

£31.20

BVF 003

1”

£31.20

Brass Float Bracket and Float Switch Bracket

Brass Gate Valves

Dual Float Switches

Size

Price

Ref

Size

Price

BGV 200

2”

£25.84

BFB 002

3/4”

£15.10

BGV 300

3”

£63.99

Ref

Size

Price

BFB 003

1”

£15.10

BGV 400

4”

£103.48

DFS 001

Dual 5m Cable

£50.70

230v-24v Transformer

Partially Filling Float Switch

Steel Tank Take Off Units

Ref

Size

Price

Ref

Description

Price

STT 200

2”

£57.00

Ref

Voltage

Price

PFF 002

Switch

£41.30

STT 300

3”

£95.00

TRA 024

240-24

£60.00

PFF 001

Tank Bracket

£30.00

STT 400

4”

£169.00

IRRIGATION AND WATER STORAGE

Ref


115

Polyethylene Tanks

Manufactured from UV stabilized polyethylene. Tough and durable. Ribbed design provides added strength.

IRRIGATION AND WATER STORAGE

Do not rust or corrode, impact resistant and long lasting (10 year warranty). One piece construction ensures long term structural strength (some manufacturers make their tanks in two halves and join them together). Carefully programmed manufacturing process ensures max wall thickness at the base, where it’s needed the most. Comes with a 2” Female BSP outlet as standard – larger outlets available on request. Tank Capacity

Tank Size

Ref

Litres

Gallons

Diameter

Height

Outlet

Price Ex. delivery

PTV 005

500

110

0.7m

1.44m

1½”

£132.00

PTV 007

720

158

0.7m

2.15m

1½”

£155.80

PTV 012

1,250

275

1.2m

1.2m

1½”

£218.50

PTV 025

2,500

550

1.4m

1.8m

1½”

£300.00

PTV 040

4,000

881

1.9m

1.85m

2”

£522.00

PTV 050

5,000

1,100

1.9m

2.15m

2”

£641.00

PTV 060

6,000

1,321

1.9m

2.28m

2”

£726.00

PTV 065

6,500

1,431

2.6m

1.5m

2”

£755.00

PTV 070

7,000

1,541

2.4m

1.82m

2”

£855.00

PTV 085

8,500

1,872

2.6m

2.06m

2”

£1,026.00

PTV 100

10,000

2,202

2.4m

2.5m

2”

£1,064.00

PTV 125

12,500

2,753

2.6m

2.6m

2”

£1,330.00

PTV 168

16,800

3,700

2.6m

3.41m

2”

£1,900.00

PTV 208

20,800

4,580

2.6m

4.15m

2”

£2,185.00

PTV 250

25,000

5,506

2.7m

4.65m

2”

£2,902.00

Please Note: All prices exclude VAT

Delivery will be charged at cost (please phone for a quote)


116

Lagoon Liners

Rubber Lagoon Liners

Heavy Duty Lagoon Liner Underlay

250g/m2 sold per m2

Manufactured from 0.75mm or 1.00mm thick industrial grade rubber (EPDM)

Used as a protective barrier between substrate and liner to help protect from penetration by sharp stones, roots etc

Durable, flexible and rot-proof 20 year guarantee against UV degradation Fish safe and no negative effect on the environment

Reduces excessive localised stretching of the liner when ground settlement occurs over time Superior non-woven, mechanically bonded, puncture resistant, polypropylene geotextile

Colour: Black Good flexibility to follow the contour on uneven ground

Max, single sheet size for 0.75mm thickness 1,800m2 - Max sheet width:40m Max, single sheet size for 1.00mm thickness 1,400m2 - Max sheet width:40m

Supplied as 2mtr wide rolls which are rolled out with small overlap Guide Prices: Please call for quote

Unlimited sizes available, but on-site joining may be required (call for details) Guide Prices: Please call for quote Price/m2 Thickness

100-249m2

250-499m2

500-999m2

Price/m2

1000m2+

0.75mm

£5.00

£4.75

£4.51

£4.29

Weight

1.00mm

£6.33

£6.02

£5.72

£5.43

250g/m2

100-249m2

250-499m2

500-999m2

1000m2+

£1.71

£1.63

£1.55

£1.47

IRRIGATION AND WATER STORAGE

Sold per m2


117

Sheep and Livestock Housing

With over 40 years of experience in the design and manufacture of polytunnels, our staff can ensure you get the best service and the highest quality product from the UK’s largest polytunnel manufacturer. The notion that a polytunnel is a poor man’s livestock house is certainly no longer the case. Advancements in structural design, developments in covering materials, and improved engineering techniques make them a truly credible, inexpensive alternative to traditional livestock buildings.

LIVESTOCK HOUSING

Polytunnels allow much welcomed light and warmth to enter the building. This not only improves food conversion rates but creates a healthier, drier environment which is less favourable to many bacteria and fungi. We have found customers using our structures for hay/ general storage as well as a dry place to house sheep before and during shearing, making them a year round investment. They are becoming increasingly popular as calf housing and poultry sheds, as well as housing for dairy herds, beef cows, goats and pigs.

Northern Polytunnels has adapted the basic polytun nel structure and replaced the clear sheet with a cooler option 720g white polythene, large end access points and side vents. Our sheep structures are one of the strongest on the market using 50mm and 60mm diameter galvanised tubing and heavy duty foundation tubes, with 2 piece hoops (much stronger than 3 and 4 piece hoops supplied by some of our competitors). 5’ hoop spacings are standard but we can opt for 6ft spacings in favourable locations.


118

Specifications Foundations Heavy duty galvanised foundation tubes with a 3.5mm wall thickness to give increased protection from corrosion. Hoops Manufactured from Z35 pre-galvanised steel. Supplied in two pieces for extra strength and ease of construction. All steel tube is galvanised inside and out. Standard hoop spacings are 5ft apart. 18ft and 21ft wide polytunnels 50mm O.D. steel tube. 24ft, 27ft and 30ft wide polytunnels 60mm O.D steel tube.

The hoops of our multi-span structures don’t start to curve until 6ft (1.83m) above ground. Timber Ends 3” x 3” (75mm x 75mm) tanalised timber end frames with shade net panels for each end (doors not supplied). Side Vents 4” x 2” (100mm x 50mm) tanalised timber side rail including fittings, battens and nails for both sides of the structure. Complete with side ventilation netting (tensile strength of 30kN/m) with a 63% wind protection factor.

Polytunnel Cover White Polythene: Produces shade and reduces daytime temperatures for your livestock. With an average light transmission of 60-70%, more than enough natural light passes through to give full visibility, yet reduces the excessive temperatures that clear polythene sheets can generate. The reduced light and temperature levels also make white polythene ideal for most general storage applications. Comes with an incremental 5 year guarantee covering any manufacturing defects and UV degradation. Life expectancy in excess of 10 years. Green & White Polythene: The green outer layer helps this cover blend in with the environment, whilst the white layer reflects internal lighting to provide a pleasant working environment. A black core layer ensures complete opacity (black-out) and contributes to the durability of the film. As this polythene does not allow natural light to pass through, artificial lighting may be required. Optional bracing bars These increase the wind and snow load capacity by approx. 20%

POLYTUNNEL WIDTH

18ft (5.5m)

21ft (6.4m)

24ft (7.31m)

27ft (8.23m)

30ft (9.14m)

21ft (6.4m) Multi-span

26ft (8.0m) Multi-span

OVERALL HEIGHT

9’9” (2.97m)

10’ (3.5m)

10’6” (3.20m)

10’9” (3.28)

12’ (3.66m)

12ft (3.66m)

13ft (3.96m)

LIVESTOCK HOUSING

Straight Sides The hoops of our single span structures don’t start to curve until 4ft (1.22m) above ground.

Anti-Hot Spot Tape This tape is placed over the hoop prior to the polythene being fitted. It acts as an insulation between the metal and the polythene and can prolong the life of a polythene sheet by at least a year.


119

Aircraft Hangars

LEISURE STRUCTURES

We design and manufacture cost effective hangars for light aircrafts and microlights. Hangars can be clad with either green polythene (white on the underside) or heavy duty PVC coated fabric in a choice of colours.  Supplied with a wind-up front door and a small personnel access door at the rear.  Removable support posts are supplied with the front door which add extra support against the wind whilst still allowing your aircraft full access.  The tubular steel framework is manufactured from galvanised steel, which is galvanised both inside and outside to construction grade Z35, whilst the end frames and side rails are all manufactured from aluminium box section.  The foundation tubes are normally set in concrete, and so a hole measuring approx. 50cm x 50cm x 50cm is required for each ground tube.  Alternatively, we can supply foundation tubes with base plates that are bolted directly on to an existing concrete base.  Screw anchor foundation tubes are another option if the soil type is suitable.  These simply screw 75-80cm in to the ground.  If requesting a quotation then please advise your wing span and aircraft height.


Swimming Pool Covers

120

NP Structures / Northern Polytunnels offer cost-effective, attractive solutions to cover swimming pools and other leisure areas. Ranging from standard polytunnels through to sophisticated bespoke structures, these covers are typified by a light, airy environment ‌ Perfect to relax in and take things easy.

Optional paint finish to posts and beams in a wide variety of colours Optional of PVC fabric cladding or polycarbonate roof Can be made free standing or attached to an existing building. All bespoke structures will meet full building regulations British Made - Manufactured in-house. Optional construction service. Please contact our sales team for a quote, more information or advice.

LEISURE STRUCTURES

All structures are Z35 and heavy gauge steel hot dip galvanized to BS EN ISO 1461:2009


121

CLOSED END PANEL

WORK SHELTERS Get The Job Done On Time...Every Time

END PANEL WITH DOOR

Anyone who works outdoors knows just how much chaos the British weather can bring. Concreting, grounds maintenance and construction are all badly affected when exposed to the harsh winds and heavy rain that our country is exposed to for most of the year. This unfortunately hits many companies in the pocket; mainly as a result of penalty clauses incurred when missing deadlines. At NP Structures, we have a range of high quality portable work shelters and concrete covers that provide the perfect haven from the elements; allowing you to do what you do best without external factors taking over. The end result is that all work can be completed on time, every time. Optional 2m extensions can be added to any of our shelters making it modular to suit the job. Optional gable end covers can be attached, allowing the shelter to be secured for on-site storage or protect against the elements whilst working. Unfortunately we can’t guarantee against damage caused by excessive snow or wind. VALETING BAY / WORK SHELTER SPEC

TEMPORARY STRUCTURES

WIDTH: 5mtr, 6mtr or 7mtr wide LENGTH: Base unit is 4mtr long, you can then add additional 2mtr sections...as long as you like. HEIGHT: Straight side 2mtr 5m Wide: overall height 2.87m 6m Wide: overall height 3.03m 7m Wide: overall height 3.20m

Watch a time lapse construction of a work shelter...

FRAMEWORK: Heavy duty 50mm steelwork with galvanised finish. 32mm galvanised bracings. COVER: Heavy duty 520gsm PVC covering. Fire retardant – Meets and exceeds BS 7837:1996. Supplied in 2m sections which are easier to handle, store and install. Supplying the cover in 2m sections will also be cost effective to replace in event of any damage. OPTIONAL EXTRAS: BRACE BARS: Used to give extra stability to your structure in adverse weather conditions. SNOW BARS: Required to help take the extra weight created by snow fall (call for prices).

FRAME AND MAIN COVER 4mtr Long

6mtr Long

8mtr Long

5mtr Wide

£1,240.70

£1,690.32

£2,139.94

6mtr Wide

£1,239.96

£1,692.74

£2,145.52

7mtr Wide

£1,448.41

£1,974.12

£2,499.83

4mtr Long

6mtr Long

8mtr Long

£47.64

£63.52

£79.40

POA

POA

POA

£241.50

£322.00

£402.50

OPTIONAL EXTRAS Ground Pins Snow Bars Storm Strap Kit WIDTH

DESCRIPTION

PRICE

5mtr

Closed End Panel

£189.35

6mtr

Closed End Panel

£225.32

STORM STRAPS: For further securing your shelter. Kit includes ratchet strap and ground pin.

7mtr

Closed End Panel

£239.08

5mtr

End Panel with roll up PVC Door

£224.38

GABLE ENDS: Work shelters can be fitted with gable door or fully enclosed ends. Door opening 2.5m wide x 2.1 m high

6mtr

End Panel with roll up PVC Door

£260.35

7mtr

End Panel with roll up PVC Door

£273.80

N/A

Own Company Branding (each)

£40.00

GROUND PINS: 600mm ground pin used to secure your shelter on soft ground.


122

CONTAINER CANOPIES Increase your storage space without having to shell out a huge amount of money.

CLOSED END PANEL

‘D’ PANEL

WIDTH: The canopy will suit containers spaced between 4.5m and 8.7m apart. LENGTH: Available in either 20ft or 40ft . HEIGHT: Standard Height of container approx. 2.87m. Height from the floor to the centre of canopy 5.75m. FRAMEWORK: Heavy duty 60mm steelwork with galvanised finish. 50mm galvanised bracing bars.

‘D’ PANEL: Heavy duty 520gsm PVC covering. Fire Retardant – Meets and exceeds BS 7837:1996. CLOSED END PANEL: Heavy duty 520gsm PVC covering. Fire Retardant – Meets and exceeds BS 7837:1996. The end panel is adjustable as your canopy increases or decreases in size.

The durable PVC covering is fire-retardant and waterproof and provides shelter from rain, bright sunlight, and other conditions. Constructed from 60mm galvanised steel they can withstand heavy winds and storm conditions. The pitched profile allows rain and snow to slide off, reducing the risk of damage or leaks. The space can be used for storage, and can protect farm produce such as hay, can provide a sheltered space for outdoor work, or can be used as a space to park cars or other vehicles, or to store equipment so that it is easily accessible. The canopy comes in sections and so it is easy to store, install and un-install. The canopy is adjustable, so that different amounts of storage space can be created between containers depending on requirements. Container Canopies are convenient and portable, so they can be quickly installed when extra storage space is necessary and kept in a more sheltered place at other times, increasing the life span of the product. Additionally, the canopy provides easily accessible cover in case of a sudden shift in weather, when produce has to be protected in a hurry. Extensive European standards and regulations are in place regarding this kind of product. Our container canopies meet all of these standards and are designed and built in-house.

‘D’ Top Panel

£ 497.20

Own Company Branding

£40.00

HEIGHT 2870mm

£1,176.34

F 40 OR

Closed End Panel

T 0F

£3,618.52

H2 GT

40ft Container Canopy

EN

£2,097.03

L ER

20ft Container Canopy

IN TA

PRICE

N CO

DESCRIPTION

T

Unfortunately we can’t guarantee against damage caused by excessive snow or wind.

HEIGHT 5750mm

CONTAINER CANOPY PRICES

0mm H 870 WIDT MAX

TEMPORARY STRUCTURES

COVER: Heavy duty 520gsm PVC covering. Fire retardant – Meets and exceeds BS 7837:1996.The cover is supplied in 2m sections which are easier to handle, store and install. Supplying the cover in 2m sections will also be cost effective to replace in event of any damage.

Container canopies can span a gap of varying sizes between two 20ft or 40ft shipping containers.


123

NEW Easy-Build Domestic Polytunnel

EA SY BUILD

The Easy-Build polytunnel from Northern Polytunnels is by far the quickest and easiest polytunnel to build. Simplicity and ease has been the driving force behind the NEW Easy-Build design. In a nutshell, we wanted to design the strongest polytunnel, at the best possible price, which could be built in a fraction of the time and without any specialist tools.

Our NEW Easy-Build polytunnel features innovative new foundations - Screw anchors which take just a couple of minutes each to screw into the ground, much easier than digging holes. The Easy-Build polytunnel comes with a long lasting aluminium base rails, aluminium door frames and a choice of aluminium sliding doors or a PVC ventilation panel. The framework is manufactured from 32mm, galvanised steel tube. The cover supplied is a high quality polythene that is fixed with a unique and simple to use “W’ wire” fixing system.

POLYTUNNELS

Northern Polytunnels hoops are supplied in just two sections, making them stronger than 3 or 4 sections (supplied by some competitors).

Screw Anchors Easy to install, each screw anchor takes just 1-2 minutes to screw into the ground... (other foundation options are available)

No Digging, No Mess, No Fuss

Includes online instruction video


124 The Standard Package: Screw anchor foundation tubes 1 x aluminium sliding door (front) 1 x PVC ventilation panel (rear) SuperLux 50:50 polythene cover Aluminium base rails Aluminium end frames

Many other options available, all of which can be configured on our website to provide you with an instant price www.northernpolytunnels.co.uk/hobby-range.html. Alternatively, request a copy of our ‘Hobby Gardening’ brochure.

8FT WIDE (2.44m)

10FT WIDE (3.05m)

7’- 6” (2.3m)

7’- 6” (2.3m)

6’ (1.83m) TALL PERSON

3’ (92cm)

7’ (2.14m)

6’ (1.83m) TALL PERSON

3’- 6” (1.07m)

3’ (92cm)

3’ (92cm)

7’ (2.14m)

6’ (1.83m) TALL PERSON 6’ (1.83m) TALL PERSON

12FT WIDE (3.66m)

14FT WIDE (4.27m)

Easy-Build With 5ft (1.52m) Hoop Spacings 8ft (2.4m) Wide

Length ft / m

Price

10ft (3.1m) Wide

Length ft / m

Price

12ft (3.7m) Wide

Length ft / m

Price

14ft (4.3m) Wide

Length ft / m

Price

10ft

3.1m

£620.65

10ft

3.1m

£638.90

10ft

3.1m

£659.76

10ft

3.1m

£676.48

15ft

4.6m

£689.85

15ft

4.6m

£705.94

15ft

4.6m

£737.52

15ft

4.6m

£751.56

20ft

6.1m

£759.59

20ft

6.1m

£776.37

20ft

6.1m

£811.71

20ft

6.1m

£827.19

25ft

7.6m

£828.79

25ft

7.6m

£846.26

25ft

7.6m

£882.52

25ft

7.6m

£902.28

30ft

9.1m

£898.53

30ft

9.1m

£916.69

30ft

9.1m

£956.72

30ft

9.1m

£977.91

35ft

10.7m

£967.73

35ft

10.7m

£986.57

35ft

10.7m

£1,030.37

35ft

10.7m

£1,053.00

40ft

12.2m

£1,034.64

40ft

12.2m

£1,060.37

40ft

12.2m

£1,104.56

40ft

12.2m

£1,128.62

45ft

13.7m

£1,103.84

45ft

13.7m

£1,130.26

45ft

13.7m

£1,178.21

45ft

13.7m

£1,203.71

50ft

15.2m

£1,173.58

50ft

15.2m

£1,197.85

50ft

15.2m

£1,252.41

50ft

15.2m

£1,279.34

55ft

16.8m

£1,242.78

55ft

16.8m

£1,267.74

55ft

16.8m

£1,326.06

55ft

16.8m

£1,354.43

60ft

18.3m

£1,315.89

60ft

18.3m

£1,338.16

60ft

18.3m

£1,400.25

60ft

18.3m

£1,430.05

8ft (2.4m) Wide

Length ft / m 12ft

3.7m

Price £634.33

10ft (3.1m) Wide

Length ft / m 12ft

3.7m

Price £649.74

12ft (3.7m) Wide

Length ft / m 12ft

3.7m

Price £675.44

14ft (4.3m) Wide

Length ft / m 12ft

3.7m

Price £688.05

18ft

5.5m

£707.00

18ft

5.5m

£723.10

18ft

5.5m

£752.03

18ft

5.5m

£770.19

24ft

7.3m

£782.52

24ft

7.3m

£799.30

24ft

7.3m

£832.74

24ft

7.3m

£848.22

30ft

9.1m

£854.66

30ft

9.1m

£872.13

30ft

9.1m

£913.44

30ft

9.1m

£930.36

36ft

11m

£929.64

36ft

11m

£947.79

36ft

11m

£989.49

36ft

11m

£1,011.95

42ft

12.8m

£1,005.15

42ft

12.8m

£1,024.00

42ft

12.8m

£1,070.20

42ft

12.8m

£1,089.98

48ft

14.6m

£1,077.30

48ft

14.6m

£1,096.83

48ft

14.6m

£1,150.90

48ft

14.6m

£1,172.12

54ft

16.5m

£1,149.97

54ft

16.5m

£1,173.83

54ft

16.5m

£1,227.49

54ft

16.5m

£1,254.26

60ft

18.3m

£1,225.49

60ft

18.3m

£1,249.23

60ft

18.3m

£1,308.20

60ft

18.3m

£1,332.29

POLYTUNNELS

Easy-Build With 6ft (1.83) Hoop Spacings


125

A

70

Green Polythene

40

48

Ground Cover Fabric

60

Ground Pegs

60

Agam Dehumidifiers

81-82

Curtain Tube

Air Circulation Fan

73

D

Algae Cleaner

44

Danish Trolley Tracking

67

Ground Staples

60

Algiclear Pro

44

Dehumidifiers

81-82

Ground Tubes

54

Ali-Box End Frames

27-28, 45

Diffused Polythene

37

Gutter Mastic

47

Ali-Box Side Rails

27-28, 45

Disinfectant

44

Gutter Tape

47

Ali-Trap System

27-28, 45

Display Benches

65

Gutters

29

Altus

21-22

Door Guides

51

H

Aluminium End Frames

27

Door Handles

51

Heat Controller

74

Aluminium Side Rails

28

Door Joiners

51

Heaters

75-80

Anti-Condensation Coating

43

Door Lintels

46

Hinges (Door)

51

Door Posts

46

Hoops

53

Anti-Hot Spot Repair Tape

47

Door Rollers

51

Hortisept Pro

44

Anti-Hot Spot Tape

47

Door Tracking

51

Hose

102

Anti-Luce Fasteners

52

Doors

25

Hose Reels

103

Dosatron

108

Hose Tracking Kit

92 103

B Ball Float Valves

114

Double Skinning

33, 74

Hose Trolley’s

Barbed Fittings

93

Drip Irrigation

83-86

Base Plates

54

I

Drip Lines

83

Inflation Fan

33, 74

Base Rails

28, 46

Dripper Assemblies

84-85

Insect Netting

58

Battens

46

Drippers

84-86

Insulated Polytunnels

33

Battery Operated Water Timers

106

E

Insulation Polythene

62

Bayco Monofilament

48

Eco Climate Converter

81-82

Iron Fittings

94

Benching

65-66

Electric Control Panels

70, 74, 88, 105

Irrigation

83-115

Bird Netting

58

Electric Motors

69-70

Irrigation Controllers

88, 105

Black/White Polythene

60

End Frames

27

L

Bolts

52

Energy Screens

63

Lagoon Liners

116

Bracing Bars

53

Entrance Canopies

5-6

Lambing Shelter

117-118

Brass Hose Couplers

101

Exhaust Clamps

50

Lances

102

Bubble Film

62

Exhaust Fans

71-72

Lantor Capillary Mat

87

Butterfly Netting

58

F

LDPE Pipe & Fittings

93

C

Fan Controller

73-74

Liquid Shade

43

Cable

50

Fans

71-74

Livestock Housing

117-118

Cable Grips

50

Feed Injectors

108

Louvres

26

Cable Ties

52

Filters

107

Low Voltage Cable

105

Calf Houses

117-118

Float Switch

114

Lumisol

35-37

Capillary Matting

87

Floor Film

60-61

M

121

Fogger

87

MDPE Pipe & Fittings

99-100

47

Foundation Tubes

54

Mid Rails

28, 46

Clear Polythene

36, 61-62

Fruit Cages

9

Mini Tunnels

9

Click Fit Hose Connectors

101

G

Mist & Wean Unit

88

Cloche Film

61

94

Mist Nozzles

87

Coach Bolts

52

Galvanised Threaded Fittings

Misting

87-88

Garden Centre Structures

5-8

Monofilament

48

Garden Polytunnels

9, 123-124

Multi-Span Polytunnels

19-20

Gate Valves

104

Mypex

60

Gear Boxes

48

Geka Type Fittings

101

Glasshouse Cleaner

44

Car Valeting Bays Clear Joining Tape

INDEX

Curtain Motors

Commercial Polytunnels

10-20

Container Canopies

122

Control Panels

70, 74, 88, 105

Covered Retail Area

5-6

Crop Bars

53

Crop Support

34

N Nail Plates


Nails

52

Roll Down Curtains

23-24, 55

Netting

56-59

Rolling Benches

66

Non-Return Valves

104

Roof Bolts

52

Nuts

52

Roses (watering)

102

Rubber Walkway

68

O Omega Clips

51

S

Overhead Irrigation Kits

90

‘S’ Hooks

50

Overhead Sprinklers

89

Saddle Clamps

99

Sand Filters

107

P

126

V Valve Boxes

106

Valves

104-105

Ventilation

23-26, 55, 69-72

Ventilation Controller

70, 72, 74

Ventilation Motors

24, 70

Ventilation Screens

23-24, 55

Verritex Pro

44

Visqueen Polythene

35-40

Paraweb

59

Screws

52

Pathways (Rubber)

68

Shade Covers

41

W

Phormisol

60

Shade Hall

31

Washers

52

Pipe

30, 93, 95, 99

Shade Screens

31

Water Filters

107

Pipe Clamps

99

Shade Tunnel

63-64

Water Pumps

109-110

Poly Water Tanks

115

Sheep House

32

Water Tanks

111-115

Polycord

48

Side Rails

117-118

Water Timers

105-106

Polytex Pro

43

Side Vent Film

28, 46

Webbing

48

Polythene Film

35-40, 55, 60-62

Side Vent Gearboxes

55

Weed Control Fabric

60

Side Vent Guide Rail

48

White Polythene

39, 60-61

Polythene Joining Tape

47

Side Ventilation Net

56-57

Wiggle Wire

45

Polythene Repair Tape

47

Side Vents

23-24, 55

Winch

48

Polytunnel Cleaner

43

Single Span Polytunnels

10-18

Wind Break Mesh

59

Polytunnel Covers

35-42

91

Wind Up Curtains

23-24, 55

Polytunnel Fittings

48-54

Sled Base Sprinkler Stands

Wire Cable

48

45-54

Sleeve Anchors

52

Work Shelters

121

72

Sliding Door Track

51

Wire Stainers

50

73

Sliding Doors

25

W-Wire

45

Polytunnels

10-33

Solenoid Valves

105

Pond Liners

116

Spinnet Nozzles

89

Porous Pipe

83

Spray Guns

102

Potting Bench

66

Spring Clips

51

Pressure Valves

104

Sprinkler Stands

91

Pressure Vessels

110

Sprinklers

89-91

Propagation Film

61

Standpipes

91

Proportional Feed Injectors

108

Staples

60

Steel Water Tanks

111

Pumps

109-110

Straining Wire

50

PVC Covers

42

Sun Clear

43

PVC Paving

68

PVC Pipe & Fittings

95-98

Polytunnel Parts Polytunnel Roof Fan Polytunnel Roof Vent

Q Q3 White (shade Paint)

43

Quick Hose Couplers

101

R

T Tank Covers

113

Tank Liners

112

Tape

47

Taps

101, 104

Tee Bolts

52

69

Thermal Screens

63

Rainwater Pipe & Fittings

30

Threaded Iron Fittings

94

Raised Beds

9

Timber

46

Reinforced Polythene

62

Timber Battens

46

Retail Benches

65

Traditional Canopies

7-8

Retail Canopies

5-8

Twin Skin Fan

74

Ridge Tube

53

Twin Skinning

33, 74

INDEX

Rack & Pinion


Much, much more than just a polytunnel company

NORTHERN

POLYTUNNELS & HORTICULTURAL SUPPLIES

Tel: 01282 873120 | Email: sales@npstructures.co.uk Mill Green, Waterside Road, Colne, Lancashire, BB8 0TA

www.northernpolytunnels.co.uk | www.npstructures.co.uk

Northern Polytunnel Commercial Brochure 2016  

Polytunnels, Irrigation, water storage, gardening, horticulture, sheep housing, danish trolley

Northern Polytunnel Commercial Brochure 2016  

Polytunnels, Irrigation, water storage, gardening, horticulture, sheep housing, danish trolley

Advertisement