Page 1

PRODUCT CATALOG

“Our fiber expertise is your strength”


DT Light-Post®

ILLUSION® Color-On-Command Technology

X-RO®

eXtra RadiOpaque fiber

The D.T. Light-Post is an advanced fiber post that adapts to the contours of the prepared or over-prepared canal. Each post size has TWO separate apical tapers, based on scientific, anatomical measurements, and a parallel coronal section.

Designed at the University of Montreal, and introduced in 2001, DT Light-Post is the subject of over 130 published studies, including long-term clinical trials.

@220C

Why use DT Light-Post? •

Elastic Modulus (15GPa) like dentin, for mechanical compatibility with tooth structure, prevention of root fracture

Exclusive patented (X-RO) fibers, provide high strength, fatigue resistance and radiopacity (340% of Al), for resistance, peace of mind

As a fiber-reinforced composite, it cannot corrode and it is biocompatible.

Double-Tapered apical section conserves dentin and eliminates internal stress angles

The parallel coronal section provides maximum strength in the cervical and restorative zones

Micro-retentive surface offers push-out retention comparable to parallel metal posts

Available with patented Illusion technology; to match post-to-drill, and to reduce confusion & ease removal, if necessary

370C

Post Diameters (mm)

Parallel Section

Taper #1 Section

Taper #2 Section @370C

220C

All posts are 20mm long

Size: .5 ∅ 1.25

∅ 0.8

1 1.50

0.9

2

3

1.80

2.20

1.0

1.2

Properties: •

Flexural Strength:

-X-RO Version: 1900 MPa

-“Standard” version: 1500 MPa

Fatigue Cycles without rupture:10 Million

(10 Million cycles = ~20 years’ mastication)

Interlaminate Shear Strength: 60-75 MPa


Product Codes: Assortment Packages: 1590000 DT Light-Post Illusion System Kit A: 5 posts each: Sizes .5, 1, 2 & 3, 1 Universal Starter Drill, 3 Finishing Drills Sizes 1, 2 & 3, 1 Syringe (9G) Corecem, 1 Bottle (4.5ML) Sealbond Ultima, 100 Composibrush Applicators,1 Syringe (5G) Etchant, 10 Mixing tips, Placement Tips, Syringe Tips, 1 Diamond Disc, 1 Size Selection Card.

1590001 DT Light-Post Illusion System Kit B (Pictured):

5 posts each: Sizes .5, 1, 2 & 3, 1 Universal Starter Drill, 3 Finishing Drills Sizes 1, 2 & 3, 1 Pre-Shaping Drill #1, 1 Pre-shaping Drill #2, 1 Syringe (9G) Corecem, 1 Bottle (4.5ML) Sealbond Ultima, 10 Mixing tips, Placement Tips, 1 Size Selection Card.

1590001 DT Light-Post Illusion System Kit C: 5 posts each: Sizes .5, 1, 2 & 3, 1 Universal Starter Drill, 3 Finishing Drills Sizes 1, 2 & 3, 1 Syringe (9G) Corecem, Mixing tips, Placement Tips, 1 Size Selection Card.

1590320 DT Light-Post Illusion Intro. Kit: 5 posts each: Sizes .5, 1, 2 & 3, 1 Universal Starter Drill, 3 Finishing Drills Sizes 1, 2 & 3, 1 Size Selection Card. 1590301 DT Light-Post Illusion Trial Kit: 1 Universal Starter Drill #1, One Finishing Drill #1, 3 DT Light-Posts, Size #1 (Red)

Refill Packages: 1590350B 5 DT Light-Post Illusion Posts #.5 (Black))

1590351B 5 DT Light-Post Illusion Posts #1 (Red)

1590352B 5 DT Light-Post Illusion Posts #3 (Yellow)

1590333B 5 DT Light-Post Illusion Posts #4 (Blue)

1590310B 10 DT Light-Post Illusion Posts #.5 (Black))

1590311B 10 DT Light-Post Illusion Posts #1 (Red)

1590312B 10 DT Light-Post Illusion Posts #3 (Yellow)

1590313B 10 DT Light-Post Illusion Posts #4 (Blue) Also available in original “non-Illusion” composition (same dimensions).

Drills: 1520110 DT Light-Post Universal Starter Drill #.5

1520111 DT Light-Post Finishing Drill #1

1520112 DT Light-Post Finishing Drill #2

1520113 DT Light-Post Finishing Drill #3

3510310B 10 DT Light-Posts #.5

3510311B 10 DT Light-Posts #1

3510312B 10 DT Light-Posts #2

3510313B 10 DT Light-Posts #3

Re-access Drills 1080010 2 Pilot Drills

1090001 Re-access Carbide Kit

1090011 2 Re-access Drills #1


Macro-Lock™ Post ILLUSION®

X-RO®

eXtra RadiOpaque fiber

Macro-Lock is RTD’s self-retentive post, which can be bonded, or placed with self-adhesive, self-etching or Resin-Modified Glass Ionomer (RMGI) cements.

It is made from the SAME material as our famous DT Light-Post, which is supported by over 130 published studies, including long-term clinical trials.

The Original neutral/ translucent version is also available, with even greater light transmission, Also available in OVAL shape for very wide flared - oval space.

@220C

Why use Macro-Lock Post? •

Elastic Modulus (15GPa) like dentin, for mechanical compatibility with tooth structure, prevention of root fracture

Exclusive patented (X-RO) fibers, provide high strength, fatigue resistance and radiopacity (340% of Al), for resistance, peace of mind

As a fiber-reinforced composite, it cannot corrode and it is biocompatible.

Tapered apical section conserves dentin and eliminates internal stress angles

The parallel coronal section provides maximum strength in the cervical and restorative zones

Flat sides in coronal section to prevent rotation of the core

Macro-retentive surface offers retention comparable to parallel metal posts

Available with patented Illusion technology; to match post-to-drill, and to reduce confusion & ease removal, if necessary (See DT Light-Post page)

Post Diameters (mm) Size:

All posts are 17.5 mm long 1 2 3

∅ 1.35

1.45

1.65

Parallel Section Tapered Section

@370C 4 1.85

Properties:

∅ 0.8 Starter

Drill: 1

Finishing

Drill 1

0.8

1.0

1.0

1

2

2

2

3

4

Flexural Strength:

-X-RO Version: 1900 MPa

-“Standard” version: 1500 MPa

Fatigue Cycles without rupture:10 Million

(10 Million cycles = ~20 years’ mastication)

Interlaminate Shear Strength: 60-75 MPa


Root canals are rarely round; oval spaces are more common than round ones. Endodontic treatment and re-treatment can leave an over-prepared, compromised tooth with an ovoid and profoundly tapered space. Circular post systems are only eective in the most apical portion of the post space, because the majority of prepared post spaces demonstrate considerable flare in the occlusal half.Macro-Lock OVAL reduces the amount of cement, displacing it with high-performance fiber-reinforced composite.

Product Codes: Assortments: 4590000 Macro-Lock Illusion System Kit A: 5 posts each: Sizes 1, 2, 3 & 4, 4 Finishing Drills Sizes 1,2,3 & 4, 1 Pre-Shaping Drill #1, 1 Pre-shaping Drill #2, 1 Syringe (9G) Corecem, 1 Bottle (4.5ML) Sealbond Ultima, 100 Composibrush Applicators,1 Syringe Etchant, 10 Mixing tips, Placement Tips, Syringe Tips, 1 Diamond Disc, 1 Size Selection Card.

4590001 Macro-Lock Illusion System Kit B (Pictured):

5 posts each: Sizes 1, 2, 3, & 4, 4 Finishing Drills Sizes 1, 2, 3 & 4, 1 Pre-Shaping Drill #1, 1 Pre-shaping Drill #2, 1 Syringe (9G) Corecem, 1 Bottle (4.5ML) Sealbond Ultima, 10 Mixing tips, Placement Tips, 1 Size Selection Card.

4590001 Macro-Lock Illusion System Kit C: 5 posts each: Sizes 1, 2, 3 & 4, 4 Finishing Drills Sizes 1,2,3 & 4, 1 Pre-Shaping Drill #1, 1 Pre-shaping Drill #2,1 Syringe (9G) Corecem, Mixing tips, Placement Tips,1 Size Selection Card.

4590320 Macro-Lock Illusion Intro. Kit (Pictured): 5 posts each: Sizes 1, 2, 3 & 4, 4 Finishing Drills Sizes 1,2,3 & 4, 1 Pre-Shaping Drill #1, 1 Pre-shaping Drill #2, 1 Size Selection Card. 4590302 Macro-Lock Illusion Trial Kit: 1 Pre-shaping Drill #1, One Finishing Drill #2,

3 Macro-Lock Posts, Size #2 (Red) 4590320 Macro-Lock OVAL Universal Kit (Pictured): 5 posts each: Sizes 1, 2, 3 & 4, 4 Finishing Drills Sizes 1, 2, 3 & 4, 1 Pre-Shaping Drill #1, 1 Pre-shaping Drill #2, 1 Size Selection Card. 4690003 Macro-Lock OVAL Intro. Kit A: 5 posts each: Sizes 1 & 3, 2 Starter Drills Sizes #1 & 2,

2 Finishing Drills Sizes 1 & 3., 1 Size Selection Card. 4690004 Macro-Lock OVAL Intro. Kit B: 5 posts each: Sizes 1 & 3, 2 Starter Drills Sizes #1 & 2, 2 Finishing Drills Sizes 2 & 4, 1 Size Selection Card.

Macro-Lock OVAL

Post Dimensions (mm) All posts are 18 mm long

Size:

1

∅ 2.17

0.8 Starter

Drill: 1

Finishing

Drill : 1

2

3

4

2.29

2.49

2.65

0.8

1.0

1.0

1

2

2

2

3

4


Refill Packages: 4590311B 4590312B 4590313B 4590314B

10 Macro-Lock Illusion Posts #1 (Yellow)

10 Macro-Lock Illusion Posts #2 (Red)

10 Macro-Lock Illusion Posts #3 (Blue)

10 Macro-Lock Illusion Posts #4 (Green)

46900501 46900502 46900503 46900504

5 Macro-Lock OVAL Posts #1 (Yellow)

5 Macro-Lock OVAL Posts #2 (Red)

5 Macro-Lock OVAL Posts #3 (Blue)

5 Macro-Lock OVAL Posts #4 (Green)

Also available in original “non-Illusion” composition (with the same dimensions).

Drills: 4520120 Macro-Lock Starter/ Pre-Shaping Drill #1

4520119 Macro-Lock Starter/Pre-Shaping Drill #2

4510311 10 Macro-Lock Posts #1

4510312 10 Macro-Lock Posts #2

4510313 10 Macro-Lock Posts #3

4520121 4520122 4520123 4520124

Accessory products:

0970000 100 Composibrush (micro-brushes)

1070020 1 Composidisc

Macro-Lock Finishing Drill #1 (Yellow)

Macro-Lock Finishing Drill #2 (Red) Macro-Lock Finishing Drill #3 (Blue)

Macro-Lock Finishing Drill #4 (Green)

Re-access Drills 1080010 2 Pilot Drills

1090001 Re-access Carbide Kit

1090011 2 Re-access Drills #1

General Post Placement Technique: The graphics below illustrate the BASIC steps for placement of the Macro-Lock Post. The clinician should always consult the Instructions For Use which are included in every package.

See clinical step-by-step case studies at www.rtddental.com


Matchpost™ The Matchpost is a basic glass fiber post design that has an apical taper, and a parallel coronal section for strength in the critical cervical area. In addition, the surface of the post is micro-mechanical, for excellent bonding and long-term retention.

Available in four sizes, the Matchpost is RTD’s most economical system.

Why use Matchpost? •

Elastic Modulus (13 GPa) like dentin, for mechanical compatibility with tooth structure, prevention of root fracture

Proprietary glass fibers, provide high strength, fatigue resistance and radiopacity (200% of Al), for resistance, peace of mind

As a fiber-reinforced composite, it cannot corrode and it is biocompatible.

Tapered apical section conserves dentin and eliminates internal stress angles

The parallel coronal section provides maximum strength in the cervical and restorative zones

Neutral shading for maximum light transmission

Parallel Section Tapered Section

Post Diameters (mm)

Starter

Drill:

1.22

1.42

4

21mm

1.62

Properties: •

Flexural Strength: 1500 MPa

0.68

0.77

0.86

Tentile Strength: 2200 MPa

1

1

2

2

Fatigue Cycles without rupture:10 Million

(10 Million cycles = ~20 years’ mastication)

1

2

3

4

Interlaminate Shear Strength: 65 MPa

∅ 0.58

Finishing

Drill

3

19mm

15mm

∅ 1.02

2

17mm

1

Size:


Product Codes: Assortments: 4800001 Matchpost Kit A (Pictured) : 5 posts each: Sizes 1.0, 1.2, 2 Pre-Shaping Drills, 2 Finishing Drills.

4800002 Matchpost Kit B:

5 posts each: Sizes 1.4, 1.6, 2 Pre-Shaping Drills, 2 Finishing Drills.

Refill Packages: 4810510 5 Matchposts #1.0 (Red)

4810512 5 Matchposts #1.2 (Blue)

4810514 5 Matchposts #1.4 (Green)

4810516 5 Matchposts #1.6 (Black)

Drills: 4820101 1 Matchpost Starter Drill #1.0 -1.2

4820102 1 Matchpost Starter Drill #1.4 -1.6

4820210 4820212 4820214 4820216

1 Matchpost Finishing Drill #1.0 (Red)

1 Matchpost Finishing Drill #1.2 (Blue)

1 Matchpost Finishing Drill #1.4 (Green)

1 Matchpost Finishing Drill #1.6 (Black)


Quartz Splint™

Quartz Splint is a range of 4 presentations, with overlapping indications, according to preference and specific clinical demands. QS is made from a different Quartz fiber than our popular posts, and is prewetted with light-cured methacrylic resin at the factory so that it chemically bonds to most composites and acrylics.

Independent studies confirm Flexural and Shear Bond Strength superior to glass and polyethylene fiber products, and it does not “wick". The QS Family has a myriad of EVERY DAY uses in the dental practice or dental laboratory: • Splinting mobile teeth, from trauma or gum disease/bone loss • Reinforcing composite or acrylic bridgework • Reinforcing and repair of acrylic dentures and partials, in the clinic OR the laboratory • Reinforcing Implant Registration Keys • Creating custom-formed endodontic posts (with or without a prefabricated “Master” post)

Why use Quartz Splint? •

Pre-wetting at the factory saves time, materials, promotes consistency, prevents errors and voids

The high-performance Quartz fibers provide high strength and increases the strength of the composite or acrylic

“Near-Zero” memory in Rope and Woven stays where it is put, allows easier manipulation, placement

Cannot corrode like metal wires and mesh, for long life-span, no “show-through”

Low Elastic Modulus, like composite & acrylic, to prevent de-lamination, micro-leakage

Available with and without L/C resins, for a complete system with synergistic properties

Two year shelf-life allows inventory with peace of mind


Product Codes: Assortments: 5011106 Quartz Splint Intro. Kit: 5 UD 1.0mm X 80mm, 5 WOVEN 2.5mm X 80mm, 1QS RESIN (1.5G), 1 QS FLOW (2G), Accessories

120

5011108 Quartz Splint Intro. Kit (Pictured): 5 UD 1.0mm X 80mm, 5 UD 1.5mm X 80mm, 1QS RESIN (1.5G), 1 QS FLOW (2G), Accessories

5011110 Quartz Splint Intro. Kit: 5 UD 1.5 mm X 80mm, 5 WOVEN 2.5mm X 80mm, 1QS RESIN (1.5G), 1 QS FLOW (2G), Accessories

120

5020110 Quartz Splint UD Intro. Kit: 10 UD 1.5mm X 80mm, 1QS RESIN (1.5G), 1 QS FLOW (2G), Accessories

5030110 Quartz Splint WOVEN Intro. Kit: 10 WOVEN 2.5mm X 80mm, 1QS RESIN (1.5G), 1 QS FLOW (2G), Accessories

5040110 Quartz Splint ROPE Intro. Kit: 10 ROPE 1.5mm X 80mm, 1QS RESIN (1.5G), 1 QS FLOW (2G), Accessories

REPLACE Refills / Accessory Products: 5010048 5 Quartz Splint UD 1.0mm X 80mm

5010049 5 Quartz Splint UD 1.5mm X 80mm

5010055 5 Quartz Splint UD 1.5mm X 120mm

5010053 5 Quartz Splint WOVEN 2.5mm X 80mm

5010056 5 Quartz Splint WOVEN 2.5mm X 120mm

5010070 5 Quartz Splint ROPE 1.5mm X 80mm

5010083 2 Quartz Splint MESH 55mm X 80mm (Pictured)

5010001 Refill 2 QS RESIN Syringes (1.5G each) with Tips (Pictured) 5010200 Refill 15 Tips for QS RESIN 5000020 Refill 2 QS FLOW Syringes (2.0G each), with Tips (Pictured) 5010020 Refill 15 Tips for QS FLOW

5010010 QS Scissors

1030410 Sealbond Ultima Universal light-cure Adhesive (4.5ML) (Pictured)

0970000 100 Composibrush (micro-brushes)


Corecem™

Corecem is a dual-cure flowable hybrid composite for cementation of fiber posts and core build-ups (with or without a post).

Using the same material for both technique steps saves time, materials, eliminates one adhesive interface to facilitate a durable “monobloc” restoration.

Corecem is available in VITA® Shade A1, and it cuts like dentin

Why use Corecem? •

High mechanical properties, for long-term durability

Light-cure and self-cure catalysts for optimal depth-of-cure and peace of mind

Inclusion of Ytterbium Trifluoride nano particles means high radiopacity-for diagnostic accuracy

Available in A1 Vita shade and Corecem Blue, for easy-to-see margins

Compatible with all bonding agents, so it can be used in any practice

Available in 9G Mini-Mix syringes and in 42G auto-mix cartridges

Long, narrow Root Canal Tips provided for delivery to the bottom of the canal, to eliminate voids

Corecem Illusion is exactly like regular Corecem, except that it includes the patented Illusion Color-OnCommand technology.
 This presents as a BLUE composite while being manipulated, for easy contrast against natural tooth structure. After finishing, the BLUE color disappears, leaving a popular A1 shade. IF the core ever needs to be removed, cold water spray will make the contrasting BLUE color re-appear.

Properties: •

Compressive Strength: 300 MPa

Depth of Cure (Base Only): 4mm

Water Sorption; 7 days @ 370C: 20μg/mm3

Solubility 7 Days @ 370C : 0.00μg/mm3

Interlaminate Shear Strength: 65 MPa

Radiopacity: 400% Al


Product Codes: 1410120 Corecem Mini-Mix : 1 Double-Syringe (9G/5ml) Corecem, 10 Mixing tips, Root Canal Placement Tips

1410120 Corecem ILLUSION Mini-Mix : 1 Double-Syringe (9G/5ml) Corecem Illusion, 10 Mixing tips, Root Canal Placement Tips

1410122 Corecem Auto-Mix : 1 Double-Syringe (42G/25ml) Corecem Vita Shade A1, 100 Mixing tips, Intra-oral Placement Tips

Refills / Accessories: 1410001 Gun for Corecem Mini-Mix (9G/5ml)

1410005 Mixing Tips for Mini-Mix Syringe (50)

1410100 Intra-oral Tips for Mini-Mix Syr. (100)

1410110 Root Canal Tips for Mini-Mix Syr. (100)

1410000 Gun for Corecem Auto-Mix (42G/25ml)

1410150 Mixing Tips for Auto-Mix Syringe (50)

1410250 Intra-oral Tips for Auto-Mix Syringe (100)

1030410 Sealbond Ultima Universal light-cure Adhesive (4.5ML)

0970000 100 Composibrush (microbrush)

3 rue Louis Neel Technoparc Espace Gavaniere 38120 St Egreve France Telephone: 33 4 7656 5666 Fax: 33 4 7656 1177 email: info@rtd.fr “Our fiber expertise is your strength”

0459

www.rtddental.com

Profile for normanhicksconsulting

2019 RTD Product Catalog  

This is a draft that I created for my client in France.

2019 RTD Product Catalog  

This is a draft that I created for my client in France.