Page 1


Koelner SA has been singled out in the prestigious FORBES report, Forbes Diamonds 2009, as amongst the most dynamically developing Company.

Puls Biznesu counted KOELNER Company among the Pillars of the Polish Economy in 2008. Pillars of the Polish Economy include medium-sized and large companies which conduct their business activities in a clear and honest way, achieve excellent financial results, but at the same time are highly committed to society, and know how to react positively to the needs of the local people.

In 2007 KOELNER SA received EuroCertificate. The distinction is a signal to other entities that they are dealing with a responsible, and highly esteemed partner on the market. Having successfully gone through a three-stage assessment, conducted by law, management and accounting specialists, the company may then say it is reliable and honest.

In 2008, in the contest organized by Roland Berger Strategy Consultants under the auspices of the European Business Summit and CNN, KOELNER SA was awarded the title of „Best of European Business” in the “Growth” category. A company is chosen through the process of synthetic assessment taking into account diversified quantitative and qualitative criteria. The best and the most efficient European Companies are the winners.

The Management Board of the Warsaw Stock Exchange hereby certifies that Koelner SA securities were listed on 30 November 2004, which entitles the Company to use the logo of “Listed Company”.


cr ae ete ra te ho d c llo on w cr st on bloc ete e kw br or ic k k ho llo w pl b as ric te k r ch bo ar ip b d pl oar yw d o w od oo d st ee l pr ofi le pl d s as he ti e IT c sh t B ee t ET A

co n

GENERAL AND FRAME FIXINGS p. UNO universal plug with screw

15

FIX expansion plugs with flange and countersunk head screw

17

FIX expansion plugs with flange and hooks

17

FIX expansion plugs without flange and with countersunk head screw

18

FIX expansion plugs without flange and with hooks

18

FIX expansion plugs without flange and with coachscrew

18

KS universal expansion plugs with countersunk head screw

20

KS universal expansion plugs with hooks

20

LSB and LSM stair-tread fixings

21

KPU washbasin fixings

22

KPM WC-fixings

22

Door stops – ball shaped

23

KGS steel anchors for aerated concrete

23

FF1 frame fixing

25

KDS, KD, KDT frame fixings with long expansion zone

27

29

31

32

KKS, KKD, KKT frame fixings with short expansion zone WHS and WHO hardened screws O metal frame anchors and masking caps PU adhesive for foamed polystyrene

32

Primers

32

Foam Gun

32

RPC PU foam cleaner

32

RPS and RPP handheld and gun grade PU foams

33

Silicones

34

www.koelner.cz www.koelner.pl

1


cr ae ete ra te ho d c llo on w c st b re on loc te kw e or br k ic k ho llo w b pl as ric te k ch rbo ar ip b d pl oar yw d o pl od yw o w od oo d st ee l pr ofi le IT d s he B et ET A

co n

PLASTER BOARD FIXINGS AND CONNECTORS p. FS bugle head drywall screws for metal

37

FT bugle head drywall screws for wood

37

FSC and FTC collated bugle head drywall screws

37

WS bugle head self drilling drywall screws WS pan head self drilling drywall screws FX hammer fixing with steel nail FX hammer fixings with metric thread head connector screw KMW Zn-Al alloy hammer fixings with steel nail KWD long expansion zone hammer fixings with countersunk head and steel nail

2

37 37 41

41

42

43

DRA plasterboard fixings

43

SM metal cavity fixings

44

AT metal cavity fixings setting tools

44

SPO spring toggles

45

BIGIPS cavity fixings with countersunk cross-head screw PZ2 and agle hook

45

KTS sleeve anchor with round hook

46

TMS brass anchor with round hook

46

SRS ceiling wire hanger

46

Z-KSP ceiling spring pin

47

GS ceiling wedge anchor

47

Hangers, channel connectors, angle sections, brackets, fasteners for suspended ceilings

47

Plaster & dry-wall beads

49

Thermal insulation beads

50

GKT tapes

50


co nc co rete nc br ret ic e b k lo si ck lic s at st e b on r e ick ho llo ce w b llu ri c ho lar k llo bri ce w c ck ra la m y lig ic po ht ho t gr con llow av cr e e br ae lite te ick b ra t co lo w ed nc cks oo co re d nc te ch re ip te b pl o a yw rd IT ood B ET A

FACADE THERMAL INSULATION FIXINGS p. KI-10 fixings

53

KI-10M fixings

54

KI-10N fixings

55

KI-10NS fixings

56

TFIX-8M fixings

57

KWL insulation holding flange

58

Facade insulation fixings in bags

58

KC insulation flange with masking cap

59

MKI fire resistant metal insulation supports

60

KIK fixings

61

KES polysterene cap

61

KSF plastic cutter

61

Spacers

61

Plinth sections connector

61

HR scaffolding hooks

61

HRK expansion plugs

61

Masonry connector

61

KWB hammer in wall ties

62

Expansion plugs for KWB wall ties NKRK Expansion plugs with long expansion zone for KWB

 

62 62

KWK screw in wall ties

62

L type wall ties

63

MULTI type wall ties

63

Joint vents for cavity walls

63

Retaining clip with draining nozzle

63

Setting tool for KWB wall ties

63

www.koelner.cz www.koelner.pl

3


cr ae ete ra te ho d c llo on w cr st on bloc ete e kw br or ic k k ho llo w pl b as ric te k ch rbo ar ip b d pl oar yw d o w od oo d st ee l pr ofi le pl d s as he ti e IT c sh t B ee t ET A

co n

ROOFING INSULATION FIXINGS p.

4

GOK Plastic sleeve for fixing insulations layers to flat roofs

67

GOK-PLUS Plastic sleeve with an additional function of clamping to flat roofs

67

Steel washer deep type

68

Steel washers flat type

68

WO Self-tapping fastener to the plate max. 0.9 mm

70

WX Self-drilling fastener to the plate max. 2 x 1.25 mm

70

WB Self-drilling fastener

72

WW Fastener to wood substrates

72

WBT Self-tapping fastener for concrete

72

WCS Self-tapping fastener for concrete

72

K08L Expansion plug to the self-tapping fastener

73

Installation ends

73

SDS+ Drills for concrete

73

SDS Adapter for cone drill bit

73

G-WB080 Cone drill bit for concrete

73

PE Polyethylene insulation foil

73

Adapter bit

73

Fixing selector for appropriate thickness of roofing insulation

74

 

 


cr ae ete ra te ho d c llo on w cr st on bloc ete e kw br or ic k k ho llo w pl b as ric te k r ch bo a ip w rd pl ood yw o w od oo d st ee l pr ofi le pl d s as he ti e IT c sh t B ee t ET A

co n

SELF DRILLING FIXINGS p. „FARMER” self drilling screws with EPDM washer

77

Self drilling stitching screws with reduced drilling point to 2.5 mm – „Staples”

78

EPDM washer

79

Closed-end waterproof aluminum blind rivets

79

OC type self drilling screws with drilling capacity up to 3 mm

81

OC type self drilling screws with drilling capacity up to 5 mm

81

OC type self drilling screws with drilling capacity up to 6 mm

81

OC type self drilling screws with drilling capacity up to 8 mm

81

ON and ONP type self drilling screws with drilling capacity up to 12 mm

83

Self drilling screws for fixing the composite panels OC and ON

84

Wafer head screws – zinc plated

86

EPDM washer

87

Sealing caps

87

Stainless steel self drilling screws with reduced drilling point to 2.5 mm – „STAPLES”

88

Stainless steel self drilling screws with reduced drilling point to 3 mm – „STAPLES”

88

OCS stainless steel self drilling screws with drilling capacity up to 6 mm

89

90

91

ODWS stainless steel self drilling screws for fixing composite panels

92

Sealing of tile and trapezoidal sheets

93

Universal seals

94

Self-adhesive polyurethane sealing insulation tapes

94

Tools and accessories

94

ONS stainless steel self drilling screws with drilling capacity up to 12 mm OCS and ONS stainless steel self drilling screws for fixing the composite panels

www.koelner.cz www.koelner.pl

5


cr ho ete llo w st on blo e ckw br or ic k k ho llo w pl as bric te k ch rbo ip b ard pl oar yw d o w od oo d st ee l pr ofi l pl ed as sh tic ee s t IT B hee t ET A

co n

DIRECT FASTENING FIXINGS, TOOLS AND ACCESSORIES p. PATron MX powder actuated tool

96

PATron MX powder actuated tool accessories

96

Strip cartridges

96

Single and stripe nails for concrete and steel

97

Grease for PATron MX

6

Cordless gas nailer SC 40; nails and fuel cells

99

Frame nailer WW90CH; nails and fuel cells

100

Nails and fuel cells for frame nailer WW90CH – in cartons

100

Cordless gas 2nd fix nailers and brads

101

Metal connector nailer 38 mm and nails

101

Industrial pneumatic strip framing nailer

102

Coil nailers

103

Nails for coil nailers

103

Oil compressors

104

SPIT powder actuated tools

105

Nails for SPIT tools

105

Cartridge disks for SPIT tools

105

SP-MAX Rebar tying tool

106

Accessories for SP-MAX tool

106


cr ae ete ra te ho d c llo on w cr st on bloc ete e kw br or ic k k ho llo w pl b as ric te k r ch bo ar ip b d pl oar yw d o w od oo d st ee l pr ofi le pl d s as h tic ee IT sh t B ee t ET A

co n

HEAVY DUTY ANCHORS p. R-CAS-V spin in capsule

115

R-HAC-V hammer in capsule (studding)

117

R-KEX Epoxy resin

119

R-KEM+ Styrene free polyester resin

121

R-KER Epoxy acrylate resin

123

R-KF2 Polyester resin

125

CFS Cartridge free dispensing system

127

RV200 Vinylester styrene free resin 300ml

128

RP30 Polyester resin 300 ml

130

RM50 Polyester styrene free resin 300ml

132

COPY-ECO Reinforcement system

134

Bonded anchor studs

135

Internally threaded sockets

136

Dispenser guns

136

Additional socket drivers and adaptors for SDS MAX

137

Mesh sleeves, blow pumps, caps, brushes

137

R-XPT, R-XPT-HD and R-XPT-A4 Throughbolts

139

R-HPT Troughbolt

141

Safetyplus™

145

Rawlbolt®

147

R-DCA and R-DCL wedge anchors

153

Setting tools for wedge anchors

154

SR and SRS throughbolts

155

KT and KTS sleeve anchors

157

Brass anchors

158

 

www.koelner.cz www.koelner.pl

7


cr ae ete ra te ho d c llo on w cr st on bloc ete e kw br or ic k k ho llo w pl b as ric te k ch rbo ar ip b d pl oar yw d o w od oo d st ee l pr ofi le pl d s as he ti e IT c sh t B ee t ET A

co n

THREADED RODS, WASHERS, NUTS, SCREWS, NAILS, CHAINS, ROPES p.

8

Threaded rods

160

Hexagon studs connector

160

Zinc plated wafer head screws

160

Special countersunk flat head hardened screws

161

Countersunk flat head hardened chipboard screws

162

Hexagonal head coachscrews din 571

163

Decking screws

164

Stud screws – zinc plated

164

Furniture screws

164

Common nails DIN 1151B

165

Masonry nails

165

Roofing nails

165

Spiral shank nails DIN 68163A

166

Ring shank nails DIN 68163K

166

Ring shank timber nails

166

Roofing nail washers

166

Galvanized fence staples

166

Chains

167

Steel ropes – zinc plated

167

Plaited polypropylene ropes (coiled on reels)

167

Elastic ropes (Coiled on reels)

167

Ropes accessories

168

Tensioners

170


cr ae ete ra te ho d c llo on w cr st on bloc ete e kw br or ic k k ho llo w pl b as ric te k r ch bo ar ip b d pl oar yw d o w od oo d st ee l pr ofi le pl d s as he ti e IT c sh t B ee t ET A

co n

WOOD CONNECTORS, POST BASES AND HINGES p. D-BP Coiled strapping

173

D-WB, D-WC, D-WD Joist hangers

173

D-SP, D-SP-LP Rafter twist straps

175

D-LP Strap ties plus

176

D-PP Tie plates

176

D-LX, D-LA Perforated angle brackets

177

D-T “T-shaped” strap ties

177

D-LWG Strap ties

178

D-KB Unequal length angle brackets

178

D-ZK Equal length angle brackets „L-shaped”

179

D-ZU Universal angle brackets

179

D-MI, D-MK, D-KF, D-KP Equal length angle brackets

180

D-ZN Unequal length angle brackets plus

182

D-ZS Equal length brackets 135° plus

182

D-ZKR Adjustable angle brackets

183

D-I Anchor nails

183

D-ED Two-sided spiked plate

183

D-KN “L” shaped strap ties

184

D-MS Angle connector wide type

184

D-PD Batten roofing strut

184

D-TB, D-TU Post base with baseplate

185

D-TC, D-TCR, D-TL, D-TA Post base with embedment rebar

185

D-TD, Hammer in post base

186

D-OP Pergola bracket

186

Hinges

187

www.koelner.cz www.koelner.pl

9


cr ae ete ra te ho d c llo on w cr st on bloc ete e kw br or ic k k ho llo w pl b as ric te k ch rbo ar ip b d pl oar yw d o w od oo d st ee l pr ofi le pl d s as he ti e IT c sh t B ee t ET A

co n

DIY RANGE p. UNO Universal expansion plugs

190

Frame fixings

190

Drywall screws for steel and timber

191

Drywall screws self drilling

191

Hammer fixings – nylon

191

Rawlnut flexi-plug

191

Tap-in

191

Nylon self drill

191

Plasterboard plugs

191

Intersets

191

Self-drilling “Farmer” screws with EPDM washers z/p

192

Wafer head screws electro zinc plated

192

Wafer head self drilling screws electro zinc plated Window fitting screws with countersunk head with self-tapping coarse thread z/p Self-drilling window screws with countersunk head with selftapping fine thread z/p Pan head self-tapping screws for sheet metal with cross head

10

192 192 192 193

Fitting screw

193

Hardened chipboard “Premium” screws with countersunk head zinc plated

193

Decking screws

193

R-KEM+ Styrene free polyester resin

194


cr ae ete ra te ho d c llo on w cr st on bloc ete e kw br or ic k k ho llo w pl b as ric te k ch rbo ar ip b d pl oar yw d o w od oo d st ee l pr ofi le pl d s as he ti e IT c sh t B ee t ET A

co n

DIY RANGE p. Universal expansion plugs

195

FIX expansion plugs

196

Washbasin fixing set

197

WC fixing set

197

Stair tread fixings

197

Frame fixings

198

Hammer fixings

199

Zamak hammer fixings

199

Sleeve anchors

200

Metal frame anchors

200

Hardeners frame concrete screws

200

Expansion anchors

200

Fine thread drywall screws

201

Plasterboard fixings

202

Metal cavity anchors

202

Plastic spring toggle

203

Spring toggle bolts

203

Hardened chipboard screws with countersunk pozi drive head PZ2

204

Wafer head screws

204

Self-drilling screws with EPDM washer

205

Self-tapping pan head screws for sheet metal, zinc plated

205

Angle and round screw hooks

206

Socket head furniture screw

206

Machine screws, zinc plated

206

www.koelner.cz www.koelner.pl

11


cr ae ete ra te ho d c llo on w cr st on bloc ete e kw br or ic k k ho llo w pl b as ric te k ch rbo ar ip b d pl oar yw d o w od oo d st ee l pr ofi le pl d s as he ti e IT c sh t B ee t ET A

co n

DIY RANGE p.

12

Washers and nuts

209

Nails

207

Cable clips

209

Felt pads

209

Ball shaped door stops

209

Quick links

209

DIY sets

210

Hose clamps

210

Door latch

210

Steel anchors for aerated concrete

210

Pins

210

FIX expansion plugs

211

Hammer fixings

211

Fine thread drywall screws

211

FIX plugs MIX

212

Hammer fixings MIX

212

Nails MIX

212


General Fixings

G

e

n

e

e

s g

am

n i x i f

e m a

l

r f

a er

d n a

l a r e n e G

f

s

f

f

m a

i x i

e

r

n

m

a

s

G g

e

r

i

x

i

g

n

e

n

e

ra

l

a

n

d

fr

a

m

e

fi

xi

n

g

s

n e G

d n a

fr

ra

l

a

n

d

a fr

s g n

i

fix

m

e

x fi

in

g

s e n

e G


General Fixings

UNO universal plug

Description:

Universal plug made of high quality polypropylene or nylon. Suitable to use in every kind of substrate. Cleverly designed an inventive packaging helps to choose the right drill and screw size for plug installation.

1 Expands at top giving instant grip

2 Additional elements prevent spinning in the hole

3 Anti-rotational fins

4 Unique zigzag design, offering instant secure plug expansion throughout the entire length

5 Additional grip feature

6

14

Optimal internal design provides an even expansion and fixing leading the screw through the plug


General FixinGs ApprOvAlS

UNO

UnivErSAl plUg

All SUBStrAtES

Ø10 Grey

Ø8 Blue

Ø7 Brown

Uno-05+330 Uno-06+430 Uno-06+435 Uno-06+445 Uno-08+435 Uno-08+450 Uno-08+560 Uno-10+540 Uno-10+650 Uno-10+660

Uno-yel-96-C Uno-reD-48-C Uno-reD-96-C Uno-brn-48-C Uno-blU-40-C Uno-blU-80-C Uno-gry-40-C Uno-gry-80-C

r-Uno-yel-96n r-Uno-reD-48n r-Uno-reD-96n r-Uno-blU-40n r-Uno-blU-80n r-Uno-gry-40n r-Uno-gry-80n

mm 3.5×30 4.0×30 4.0×35 4.0×45 4.5×35 4.5×50 5.0×60 5.0×40 6.0×50 6.0×60

Product code Polyprolylen

Product code nylon (grey)

Uno-k-05 Uno-k-06 Uno-k-07 Uno-k-08 Uno-k-10

r-Uno-n-05 r-Uno-n-06 r-Uno-n-08 r-Uno-n-10

ApprOvAlS

with COUntErSUnk hEAd SCrEw

mm 5 6 6 6 8 8 8 10 10 10

Product code nylon (grey)

mm 5 6 6 7 8 8 10 10

mm 24 28 28 30 32 32 36 36

mm 3.0-4.5 3.5-5.0 3.5-5.0 4.0-6.0 4.5-6.0 4.5-6.0 5.0-8.0 5.0-8.0

pcs. 96 48 96 48 40 80 40 80

outer 10 5 10 5 5 10 5 10

Ø6 Ø5 Red Yellow

UNIVERSAL PLUG UNO

Product code

Product code Polyprolylen

mm 5 6 7 8 10

mm 24 28 30 32 36

mm 3.0-4.5 3.5-5.0 4.0-6.0 4.5-6.0 5.0-8.0

pcs. 200 200 100 100 100

UNIVERSAL PLUG UNO

pcs. 4800 4800 2400 2400 1200

ApprOvAlS

with AnglE hOOk

pcs. 100 100 100 100 100 100 100 100 100 100

pcs. 2400 2400 2400 2400 2400 2400 1800 1200 1200 1200

Product code P-Uno-06k

mm 6

mm 3.5×35

pcs. 200

UNIVERSAL PLUG UNO

pcs. 2400 ApprOvAlS

with rOUnd hOOk

Product code P-Uno-06S

mm 6

mm 3.5×35

pcs. 200

www.koelner.pl

pcs. 2400

15


d

General Fixings

L

MECHANICAL PROPERTIES Size Plug diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Installation depth Minimum substrate thickness

d d0 dfix h0 hnom hmin

[mm] [mm] [mm] [mm] [mm] [mm]

ø5

ø6

ø7

ø8

ø10

5 5 6 34 20 50

6 6 7 38 24 55

7 7 8 40 26 60

8 8 9 42 28 65

10 10 11 46 32 70

Performance data in [Kn] Size Installation depth hnom Concrete C20/25 Characteristic resistance NRk Design resistance NRd Recommended loads Nrec Solid brick 7.5 MPa Characteristic resistance NRk Design resistance NRd Recommended loads Nrec Aerated concrete 600 Characteristic resistance NRk Design resistance NRd Recommended loads Nrec Cavity brick 15 MPa Characteristic resistance NRk Design resistance NRd Recommended loads Nrec Hollow brick 15MPa Characteristic resistance NRk Design resistance NRd Recommended loads Nrec Plasterboard min. 12.5 mm Characteristic resistance NRk Design resistance NRd Recommended loads Nrec

Installation

16

Performance data in [Kg] ø5

ø6

ø7

ø8

ø10

[mm]

20

24

26

28

32

[kN] [kN] [kN]

1.39 0.77 0.55

1.48 0.82 0.59

0.89 0.49 0.35

1.25 0.69 0.49

3.59 1.99 1.42

[kN] [kN] [kN]

0.47 0.19 0.14

0.85 0.34 0.24

0.32 0.13 0.09

0.68 0.38 0.27

0.69 0.38 0.27

[kN] [kN] [kN]

0.27 0.13 0.09

0.63 0.31 0.22

0.51 0.25 0.18

0.48 0.24 0.17

0.42 0.21 0.15

[kN] [kN] [kN]

0.72 0.29 0.21

0.51 0.20 0.14

0.71 0.28 0.20

0.95 0.38 0.27

1.18 0.47 0.34

[kN] [kN] [kN]

0.39 0.15 0.11

0.51 0.20 0.14

0.60 0.24 0.17

0.81 0.32 0.23

0.92 0.37 0.26

[kN] [kN] [kN]

0.17 0.07 0.05

0.21 0.08 0.06

0.25 0.10 0.07

0.26 0.10 0.07

0.34 0.13 0.09

Size Installation depth hnom Concrete C20/25 Characteristic resistance NRk Design resistance NRd Recommended loads Nrec Solid brick 7.5 MPa Characteristic resistance NRk Design resistance NRd Recommended loads Nrec Aerated concrete 600 Characteristic resistance NRk Design resistance NRd Recommended loads Nrec Cavity brick 15 MPa Characteristic resistance NRk Design resistance NRd Recommended loads Nrec Hollow brick 15MPa Characteristic resistance NRk Design resistance NRd Recommended loads Nrec Plasterboard min. 12.5 mm Characteristic resistance NRk Design resistance NRd Recommended loads Nrec

ø5

ø6

ø7

ø8

ø10

[mm]

20

24

26

28

32

[kg] [kg] [kg]

139.0 77.0 55.0

148.0 82.0 58.6

89.0 49.0 35.0

125.0 69.0 49.3

359.0 199.0 142.1

[kg] [kg] [kg]

47.0 19.0 13.6

85.0 34.0 24.3

32.0 13.0 9.3

68.0 38.0 27.1

69.0 38.0 27.1

[kg] [kg] [kg]

27.0 13.0 9.3

63.0 31.0 22.1

51.0 25.0 17.9

48.0 24.0 17.1

42.0 21.0 15.0

[kg] [kg] [kg]

72.0 29.0 20.7

51.0 20.0 14.3

71.0 28.0 20.0

95.0 38.0 27.1

118.0 47.0 33.6

[kg] [kg] [kg]

39.0 15.0 10.7

51.0 20.0 14.3

60.0 24.0 17.1

81.0 32.0 22.9

92.0 37.0 26.4

[kg] [kg] [kg]

17.0 7.0 5.0

21.0 8.0 5.7

25.0 10.0 7.1

26.0 10.0 7.1

34.0 13.2 9.4


General Fixings FIX expansion plugs MATERIAL: Plug sleeve: polyamide PA 6.0 (Nylon) or impact resistant co-polymer of polypropylene PP Screw: zinc electroplated steel ~10 µm.

Typical applications: • Shelving and cabinets • Suspended ceilings • Switch boxes • Trunking and cable trays • Boilers • Water heaters & radiators

ApprovalS

FIX WITH FLANGE EXPANSION PLUGS

ApprovalS

FIX WITH FLANGE with angle hook

SUBSTRATE

Product code Ipolypropylene PP FIX-KK-06 FIX-KK-08 FIX-KK-10 FIX-KK-12 FIX-KK-14 Mega pack FIX-KK-06M FIX-KK-08M FIX-KK-10M FIX-KK-12M FIX-KK-14-070M

Product code

Product code Polyamide PA 6.0 (nylon) FIX-NK-06 FIX-NK-08 FIX-NK-10 FIX-NK-12 FIX-NK-14

mm 6 8 10 12 14

mm 30 40 50 60 70

pcs. 250 200 100 50 25

pcs. 6000 2400 1200 600 600

FIX-NK-06M FIX-NK-08M FIX-NK-10M FIX-NK-12M FIX-NK-14-070M

6 8 10 12 14

30 40 50 60 70

-

35000 15000 8000 4500 3000

FIX-K-06+ FIX-K-06+340 FIX-K-06+350 FIX-K-06+435 FIX-K-06+440 FIX-K-06+450 FIX-K-08+ FIX-K-08+450 FIX-K-08+460 FIX-K-08+550 FIX-K-10+560 FIX-K-10+660

mm 30 30 30 30 30 30 40 40 40 40 50 50

mm 30 40 50 60

mm 3.5×35 4.5×50 6.0×55 8.0×65

pcs. 200 100 100 50

pcs. 4800 2400 1200 600 ApprovalS

FIX WITH FLANGE with round hook

Product code

with countersunk head screw

mm 6 6 6 6 6 6 8 8 8 8 10 10

mm 6 8 10 12

ApprovalS

FIX WITH FLANGE

Product code

FIX-K-06K FIX-K-08K FIX-K-10K FIX-K-12K

mm 3.5×30 3.5×40 3.5×50 4.0×35 4.0×40 4.0×50 5.0×45 4.5×50 4.5×60 5.0×50 5.0×60 5.0×60

FIX-K-06S FIX-K-08S FIX-K-10S

pcs. 200 200 200 200 200 200 200 200 100 100 100 100

pcs. 4800 4800 2400 4800 4800 2400 2400 2400 1200 1200 1200 1200

mm 6 8 10

mm 30 40 50

mm 3.5×50 4.5×65 6.0×85

pcs. 200 100 50

pcs. 4800 1200 600

ApprovalS

FIX WITH FLANGE with pig tail hook

Product code FIX-K-12H

mm 12

mm 60

mm 8.0×130

www.koelner.pl

pcs. 25

pcs. 300

17


General Fixings FIX WITHOUT FLANGE

FIX WITHOUT FLANGE

EXPANSION PLUGS

with angle hook

ApprovalS

SUBSTRATE

Product code polypropylene PP FIX-K-05 FIX-K-06 FIX-K-08 FIX-K-10 FIX-K-12 FIX-K-14 Mega pack FIX-K-05M FIX-K-06M FIX-K-08M FIX-K-10M FIX-K-12M FIX-K-14-070M FIX-K-14-100M

Product code Polyamide PA 6.0 (nylon) FIX-N-05 FIX-N-06 FIX-N-08 FIX-N-10 FIX-N-12 FIX-N-14

mm 5 6 8 10 12 14

mm 25 30 40 50 60 70

pcs. 400 250 200 100 50 25

pcs. 9600 6000 2400 1200 1200 600

FIX-N-05M FIX-N-06M FIX-N-08M FIX-N-10M FIX-N-12M FIX-N-14-070M FIX-N-14-100M

5 6 8 10 12 14 14

25 30 40 50 60 70 70

-

50000 35000 15000 8000 4500 3000 3000

FIX WITHOUT FLANGE

Product code FIX-06K FIX-08K FIX-10K FIX-12K

mm 6 8 10 12

mm 30 40 50 60

mm 3.5×35 4.5×50 6.0×55 8.0×65

pcs. 200 100 100 50

pcs. 4800 2400 1200 600

ApprovalS

FIX WITHOUT FLANGE with coachscrew

ApprovalS

with countersunk head screw Product code

Product code FIX-05+* FIX-06+ FIX-06+340 FIX-06+350 FIX-06+435* FIX-06+440 FIX-06+450 FIX-08+ FIX-08+450* FIX-08+460 FIX-08+550 FIX-08+560 FIX-08+580 FIX-08+100 FIX-10+550 FIX-10+560 FIX-10+660 FIX-10+680 FIX-10+100 FIX-10+120 FIX-10+160 FIX-12+680 FIX-12+100 FIX-12+120

mm 5 6 6 6 6 6 6 8 8 8 8 8 8 8 10 10 10 10 10 10 10 12 12 12

mm 25 30 30 30 30 30 30 40 40 40 40 40 40 40 50 50 50 50 50 50 50 60 60 60

mm 3.5×30 3.5×30 3.5×40 3.5×50 4.0×35 4.0×40 4.0×50 5.0×45 4.5×50 4.5×60 5.0×50 5.0×60 5.0×80 5.0×100 5.0×50 5.0×60 6.0×60 6.0×80 6.0×100 6.0×120 6.0×160 6.0×80 6.0×100 6.0×120

pcs. 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 50 50 50 25 50 50 50

pcs. 4800 4800 4800 4800 4800 4800 4800 2400 2400 2400 2400 1200 1200 1200 1200 1200 1200 600 600 600 300 1200 600 600

FIX-10/660 FIX-10/680 FIX-10/100 FIX-10/120 FIX-12/60 FIX-12/70 FIX-12/80 FIX-12/100 FIX-12/120 FIX-12/140 FIX-12/160 FIX-12/180 FIX-12/200 FIX-14/80 FIX-14/100 FIX-14/120 FIX-14/160 FIX-14/180 FIX-14/200 FIX-14/220 FIX-14/260

nylon on request

mm 10 10 10 10 12 12 12 12 12 12 12 12 12 14 14 14 14 14 14 14 14

mm 50 50 50 50 60 60 60 60 60 60 60 60 60 70 70 70 70 70 70 70 70

mm 6.0×60 6.0×80 6.0×100 6.0×120 8.0×60 8.0×70 8.0×80 8.0×100 8.0×120 8.0×140 8.0×160 8.0×180 8.0×200 10×80 10×100 10×120 10×160 10×180 10×200 10×220 10×260

pcs. 100 50 50 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25

pcs. 1200 600 600 600 600 600 600 600 600 300 300 300 300 300 300 300 300 300 300 125 125

ApprovalS

FIX WITHOUT FLANGE with pig tail hook

ApprovalS

FIX WITHOUT FLANGE with round hook

Product code polypropylene PP FIX-06S FIX-08S FIX-10S

18

Product code Polyamid PA 6.0 Nylon mm 6 FIX-N-08S 8 FIX-N-10S 10

mm 30 40 50

mm 3.5×50 4.5×65 6.0×85

pcs. 200 100 50

pcs. 4800 1200 600

Product code FIX-12H

mm 12

mm 60

mm 8.0×130

pcs. 25

pcs. 300


General Fixings MECHANICAL PROPERTIES Size Plug diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Installation depth Minimum substrate thickness

ø5

ø6

ø8

ø10

ø12

ø14

5 5 6 35 25 55

6 6 7 40 30 60

8 8 9 50 40 70

10 10 11 60 50 80

12 12 13 70 60 90

14 14 15 80 70 100

ø5

ø6

ø8

ø10

ø12

ø14

25

30

40

50

60

70

[kN] [kN] [kN]

0.38 0.20 0.14

0.22 0.10 0.07

0.64 0.30 0.21

0.85 0.40 0.29

2.64 1.30 0.93

2.99 1.50 1.07

NRk NRd Nrec

[kN] [kN] [kN]

-

-

0.93 0.45 0.32

0.92 0.45 0.32

2.42 1.20 0.86

1.49 0.75 0.54

NRk NRd Nrec

[kN] [kN] [kN]

-

-

1.13 0.55 0.39

0.73 0.35 0.25

1.47 0.75 0.54

1.33 0.65 0.46

ø5

ø6

ø8

ø10

ø12

ø14

hnom

[mm]

25

30

40

50

60

70

NRk NRd Nrec

[kg] [kg] [kg]

38.0 20.0 14.3

22.0 10.0 7.1

64.0 30.0 21.4

85.0 40.0 28.6

264.0 130.0 92.9

299.0 150.0 107.1

NRk NRd Nrec

[kg] [kg] [kg]

-

-

93.0 45.0 32.1

92.0 45.0 32.1

242.0 120.0 85.7

149.0 75.2 53.7

NRk NRd Nrec

[kg] [kg] [kg]

-

-

113.0 55.0 39.3

73.0 35.0 25.0

147.0 75.0 53.6

133.0 65.0 46.4

d d0 dfix h0 hnom hmin

[mm] [mm] [mm] [mm] [mm] [mm]

hnom

[mm]

NRk NRd Nrec

Performance data in [Kn] Size Installation depth Concrete C20/25 Characteristic resistance Design resistance Recommended loads Solid brick 7.5 MPa Characteristic resistance Design resistance Recommended loads Aerated concrete 600 Characteristic resistance Design resistance Recommended loads

Performance data in [Kg] Size Installation depth Concrete C20/25 Characteristic resistance Design resistance Recommended loads Solid brick 7.5 MPa Characteristic resistance Design resistance Recommended loads Aerated concrete 600 Characteristic resistance Design resistance Recommended loads

Installation

www.koelner.pl

19


General FixinGs uniVersal expansion pluGs MaterIal: Plug sleeve: polyamide Pa 6.0 (nylon) or impact resistant co-polymer of polypropylene PP Screw: electro-zinc coated steel ~10 µm.

tyPICal aPPlICatIonS: • Shelving and cabinets • Suspended ceilings • Switch boxes • trunking and cable trays • boilers • water heaters & radiators

UNIVERSAL EXPANSION PLUGS

UNIVERSAL EXPANSION PLUGS with rOUnd hOOk

SUBStrAtE

Product code kS-06 kS-08 kS-10 Master kS-06M kS-08M kS-10M

mm 6 8 10

mm 40 50 60

pcs. 200 200 100

pcs. 3600 2400 1200

6 8 10

40 50 60

200 200 100

3600 2400 1200

Product code kS-06S kS-08S

UNIVERSAL EXPANSION PLUGS

kS-06040 kS-06050 kS-06060 kS-08050 kS-08060 kS-08070 kS-10060 kS-10070 kS-10080 kS-10100

INSTALLATION

20

mm 40 40 40 50 50 50 60 60 60 60

mm 4,0×40 4,0×50 4,0×60 4,5×50 4,5×60 4,5×70 5,0×60 5,0×70 5,0×80 5,0×100

mm 3,5×65 4,5×85

pcs. 200 100

pcs. 2400 1200

with AnglE hOOk

Product code mm 6 6 6 8 8 8 10 10 10 10

mm 40 50

UNIVERSAL EXPANSION PLUGS

with COUntErSUnk hEAd SCrEw with pz rECESS

Product code

mm 6 8

pcs. 200 200 200 100 100 100 50 50 50 25

pcs. 2400 2400 2400 1200 1200 1200 600 600 600 300

kS-06k kS-08k

mm 6 8

mm 40 50

mm 3,5×50 4,5×65

pcs. 200 100

pcs. 2400 1200


General Fixings STAIR-TREAD FIXINGS

FOR INSTALLATION ON STEEL STAIRCASE STRINGERS

SUBSTRATE

Installation

SET CONTENTS: expansion plug, countersunk head screw, 4 levelling washers.

Product code LSM

S1

L1

S2

L2

mm 14

mm 20

mm 9

mm 10

pcs. 25

pcs. 600

STAIR-TREAD FIXINGS FOR INSTALLATION ON CONCRETE STAIRCASE STRINGERS SUBSTRATE

Installation

SET CONTENTS: 2 expansion plugs, 2 stud screws, 2 nuts, 2 off-centre washers, 2 masking caps. Product code LSB

S1

L1

S2

L2

mm 14

mm 22

mm 8

mm 40

pcs. 25

pcs. 600

CENTRE PUNCHES for Stair Treads

Product code LSB-P

S2 mm 8

pcs. 2

www.koelner.pl

21


General Fixings WASHBASIN FIXINGS SUBSTRATE

SET CONTENTS: 2 masking caps 2 expansion plugs 2 countersunk head screws 2 nuts Product code KPU100 KPU120 KPU140 KPU141

mm 10 12 12 14

mm 50 60 60 70

mm M8×80 M8×100 M8×120 M10×140

pcs. 1 1 1 1

pcs. 125 100 75 65

Installation

WC-FIXINGS SUBSTRATE

SET CONTENTS: 2 expansion plugs, 2 snap-fit sleeves, 2 hexagonal head screws, 2 masking caps.

Product code KPM100

Installation

22

mm 10

mm 50

mm 6.0×80

pcs. 1

pcs. 500


DOOR STOPS BALL SHAPED

SUBSTRATE

SET CONTENTS: expansion plug, countersunk head screw, ball-shaped door stop.

Product code FIX-ODBK-01 FIX-ODBK-02 FIX-ODBK-03 FIX-ODBK-04 FIX-ODBK-05

S2

L2

mm 8 8 8 8 8

mm 40 40 40 40 40

pcs. 15 15 15 15 15

white beige brown black gray

pcs. 180 180 180 180 180

INSTALLATION

STEEL PLUGS FOR AERATED CONCRETE SUBSTRATE

Product code KGS-0530 KGS-0632 KGS-0838 KGS-0860 KGS-1060

mm

mm

mm

mm

pcs.

pcs.

5.0 6.0 8.0 8.0 10.0

30 32 38 60 60

4.5 4.5-5.0 5.0-6.0 5.0-6.0 6.0-8.0

min. 30 min. 32 min. 38 min. 60 min. 60

200 200 200 200 100

2400 2400 1200 1200 1200

INSTALLATION

www.koelner.pl

23


FraMe FixinGs

FF1 FrAME FiXing

screW Features:

carbon steel, hardened, zinc electroplated, Cr 3+ two types of screw head countersunk, tOrX 40, provides flush finish in fixture hex flange head, tOrX 40, install using hex socket or tOrX drive

pluG Features:

two types: countersunk for flush fixing of soft material like wood & wide flange for solid fixing of hard material like steel profiled internal geometry, designed to fit both types of screw heads for 4 base material types according to EtAg 020 specially formulated Ultramid equal embedment depth for all base materials, 70 mm embedment depth mark multi axis expansion

1

two zones of thread higher thread and lesser core diameter in first zone to facilitate initial installation bigger diameter of core in second zone, boosts expansion in centre zone of plug

2 longitudinal ribs facilitate easy insertion into hole and prevent rotation

3

4

2 long wings to stabilise plug while inserting screw, especially in hollow material

2 rows of spring wings expand to keep plug in required position axially located expansion slots in mid length of plug to allow an even distribution of forces and to increase load carrying capacity

5

6

24

easy opening of final expansion zone is achieved by the undercut and curved expansion slots reducing the required torque

expansion in 4 directions in 4 base materials according to EtAg (A, B, C, d).


FraMe FixinGs ApprOvAlS

FF1 FRAME FIXING with COAChSCrEw

pEnding

SUBStrAtE

Product code Polypropylen

Product code nylon – grey

Product code nylon – blue

r-FF1-10k080 r-FF1-10k100 r-FF1-10k120 r-FF1-10k140 r-FF1-10k160 r-FF1-10k200* r-FF1-10k240* r-FF1-10k300*

r-FF1-n-10k080/g r-FF1-n-10k100/g r-FF1-n-10k120/g r-FF1-n-10k140/g r-FF1-n-10k160/g r-FF1-n-10k200/g* r-FF1-n-10k240/g* r-FF1-n-10k300/g*

r-FF1-n-10k080 r-FF1-n-10k100 r-FF1-n-10k120 r-FF1-n-10k140 r-FF1-n-10k160 r-FF1-n-10k200* r-FF1-n-10k240* r-FF1-n-10k300*

mm

mm

10×80 10×100 10×120 10×140 10×160 10×200 10×240 10×300

7×89 7×109 7×129 7×149 7×169 7×209 7×249 7×309

mm

mm

10×80 10×100 10×120 10×140 10×160 10×200 10×240 10×300

7×89 7×109 7×129 7×149 7×169 7×209 7×249 7×309

pcs. torX40/M13 torX40/M13 torX40/M13 torX40/M13 torX40/M13 torX40/M13 torX40/M13 torX40/M13

50 25 25 25 25 25 25 25

* made to order

FF1 FRAME FIXING with COUntErSUnk hEAd SCrEw SUBStrAtE

Product code Polypropylen

Product code nylon – grey

Product code nylon – blue

r-FF1-10l080 r-FF1-10l100 r-FF1-10l120 r-FF1-10l140 r-FF1-10l160 r-FF1-10l200* r-FF1-10l240* r-FF1-10l300*

r-FF1-n-10l080/g r-FF1-n-10l100/g r-FF1-n-10l120/g r-FF1-n-10l140/g r-FF1-n-10l160/g r-FF1-n-10l200/g* r-FF1-n-10l240/g* r-FF1-n-10l300/g*

r-FF1-n-10l080 r-FF1-n-10l100 r-FF1-n-10l120 r-FF1-n-10l140 r-FF1-n-10l160 r-FF1-n-10l200* r-FF1-n-10l240* r-FF1-n-10l300*

pcs. torX40 torX40 torX40 torX40 torX40 torX40 torX40 torX40

50 25 25 25 25 25 25 25

* made to order

www.koelner.pl

25


FRAME Fixings

MECHANICAL PROPERTIES Size Plug diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Installation depth Minimum substrate thickness

d d0 dfix h0 hnom hmin

[mm] [mm] [mm] [mm] [mm] [mm]

Concrete C12/15

Concrete C20/25

Structural clay tile

Lightweight concrete hollow brick

Aerated concrete

10 10 11 60 50 100

10 10 11 60 50 100

10 10 11 80 70 100

10 10 11 80 70 100

10 10 11 80 70 100

Concrete C12/15

Concrete C20/25

Structural clay tile

Lightweight concrete hollow brick

Aerated concrete

50 10.00 5.00 3.57 50 100

50 11.00 5.50 3.93 50 100

70 1.20 0.60 0.43 50 100

70 0.60 0.30 0.21 50 100

70 1.50 0.75 0.54 50 100

Concrete C12/15

Concrete C20/25

Structural clay tile

Lightweight concrete hollow brick

Aerated concrete

50 1000.0 500.0 357.1 50 100

50 1100.0 550.0 392.9 50 100

70 120.0 60.0 42.9 50 100

70 60.0 30.0 21.4 50 100

70 150.0 75.0 53.6 50 100

Performance data in [Kn] Size Installation depth Characteristic resistance Design resistance Recommended loads for

hnom NRk NRd Nrec cmin smin

[mm] [kN] [kN] [kN] [mm] [mm]

Performance data in [Kg] Size Installation depth Characteristic resistance Design resistance Recommended loads for

Installation

26

hnom NRk NRd Nrec cmin smin

[mm] [kg] [kg] [kg] [mm] [mm]


FraMe FixinGs ApprOvAlS

KDS, KD, KDT FRAME FIXINGS with lOng EXpAnSiOn zOnE

DeSCrIPtIon: Fixing timber or metal window and door frames.

FeatUreS: • Countersunk Pozi-head screw provided, suitable for use with screw caps. • Durable PA6 grade nylon for extended fixing life. • tough nylon sleeve prevents frame distortion during tightening. • anti-rotation lugs. • Extended zig-zag design for enhanced expansion.

SUBStrAtE

SUItable For USe In: Concrete, Stone brickwork & blockwork tyPICal aPPlICatIon: • Quick, easy fixing of timber or metal door and window frames. • No marking out – drill straight through frame.

13/19

PZ3/PZ4

Product code kD-10080 kD-10100 kD-10120 kD-10140 kD-10160 kD-10200 kD-10240 kD-16140 kD-16160 kD-16200 kD-16240

mm

mm

pcs.

pcs.

10×80 10×100 10×120 10×140 10×160 10×200 10×240 16×140 16×160 16×200 16×240

6.8×85 6.8×105 6.8×125 6.8×145 6.8×165 6.8×205 6.8×245 12×150 12×170 12×210 12×250

50 25 25 25 25 25 25 20 20 20 20

600 450 300 300 300 300 300 200 200 200 200

Product code kDS-08100 kDS-08120 kDS-08140 kDS-10080 kDS-10100 kDS-10120 kDS-10140 kDS-10160 kDS-10200 kDS-10240

mm

mm

pcs.

pcs.

8×100 8×120 8×140 10×80 10×100 10×120 10×140 10×160 10×200 10×240

4.8×105 4.8×125 4.8×145 6.8×85 6.8×105 6.8×125 6.8×145 6.8×165 6.8×205 6.8×245

50 50 50 50 25 25 25 25 25 25

600 600 600 600 450 300 300 300 300 300

TORX 40

Product code kD-08100k kD-08120k kD-08140k kD-10080k kD-10100k kD-10120k kD-10140k kD-10160k kD-10200k

mm

mm

k mm

pcs.

pcs.

8×100 8×120 8×140 10×80 10×100 10×120 10×140 10×160 10×200

5.0×120 5.0×140 5.0×160 7.0×100 7.0×120 7.0×140 7.0×160 7.0×180 7.0×200

60* 60* 60* 60* 60* 60* 60* 60* 60*

50 50 50 50 25 25 25 25 25

600 600 600 600 300 300 300 300 300

Product code kDt-10080 kDt-10100 kDt-10120 kDt-10140 kDt-10160 kDt-10200

mm

mm

pcs.

pcs.

10×80 10×100 10×120 10×140 10×160 10×200

6.8×85 6.8×105 6.8×125 6.8×145 6.8×165 6.8×205

50 25 25 25 25 25

600 450 300 300 300 300

* made to order (no approval)

* made to order (no approval)

www.koelner.pl

27


FRAME Fixings KDS

KD, KDT

KD-...K

K – D – L – U –

min. embedment depth plug diameter plug length max. fixture thickness

MECHANICAL PROPERTIES Size Plug diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Installation depth Minimum substrate thickness

ø8

ø10

ø16

8 8 9 70 60 80

10 10 11 70 60 80

16 16 17 100 90 120

ø8

ø10

ø16

60

60

90

[kN] [kN] [kN]

0.60 0.30 0.21

1.40 0.70 0.50

2.10 1.10 0.79

NRk NRd Nrec

[kN] [kN] [kN]

-

0.80 0.40 0.29

1.30 0.70 0.50

NRk NRd Nrec

[kN] [kN] [kN]

0.90 0.50 0.36

1.20 0.60 0.43

2.70 1.40 1.00

ø8

ø10

ø16

d d0 dfix h0 hnom hmin

[mm] [mm] [mm] [mm] [mm] [mm]

hnom

[mm]

NRk NRd Nrec

Performance data in [Kn] Size Installation depth Hollow brick 3.5 MPa Characteristic resistance Design resistance Recommended loads POROTHERM 400 Characteristic resistance Design resistance Recommended loads Aerated concrete 500 Characteristic resistance Design resistance Recommended loads

Performance data in [Kg] Size Installation depth Hollow brick 3.5 MPa Characteristic resistance Design resistance Recommended loads POROTHERM 400 Characteristic resistance Design resistance Recommended loads Aerated concrete 600 Characteristic resistance Design resistance Recommended loads

Installation

28

hnom

[mm]

60

60

90

NRk NRd Nrec

[kg] [kg] [kg]

60.0 30.0 21.4

140.0 70.0 50.0

210.0 110.0 78.6

NRk NRd Nrec

[kg] [kg] [kg]

-

80.0 40.0 28.6

130.0 70.0 50.0

NRk NRd Nrec

[kg] [kg] [kg]

90.0 50.0 35.7

120.0 60.0 42.9

270.0 140.0 100.0


FRAME Fixings ApprovalS

KKS-R, KKD, KKT FRAME FIXINGS with short expansion zone

DESCRIPTION: Fixing timber or metal window and door frames.

FEATURES: • Countersunk Pozi-head screw provided, suitable for use with screw caps. • Durable PA6 grade nylon for extended fixing life. • Tough nylon sleeve prevents frame distortion during tightening. • Anti-rotation lugs. • Extended zig-zag design for enhanced expansion.

SUBSTRATE

SUITABLE FOR USE IN: Concrete, Stone Brickwork & Blockwork TYPICAL APPLICATION: • Quick, easy fixing of timber or metal door and window frames. • No marking out – drill straight through frame. KKS-…-R

KKS

PZ2/PZ4

Product code KKS-08100 KKS-08120 KKS-10080 KKS-10100 KKS-10120 KKS-10140 KKS-10160

KKS-08100-R KKS-08120-R KKS-10080-R KKS-10100-R KKS-10120-R KKS-10140-R KKS-10160-R

mm

mm

8×100 8×120 10×80 10×100 10×120 10×140 10×160

5.5×105 5.5×125 7.0×85 7.0×105 7.0×125 7.0×140 7.0×165

PZ2 PZ2 PZ4 PZ4 PZ4 PZ4 PZ4

pcs.

pcs.

50 50 50 25 25 25 25

600 600 600 450 300 300 300

13

Product code KKD-10100 KKD-10120 KKD-10140 KKD-10160

mm

mm

pcs.

pcs.

10×100 10×120 10×140 10×160

6.8×105 6.8×125 6.8×145 6.8×165

25 25 25 25

450 300 300 300

* made to order

TORX 40

Product code KKT-10100 KKT-10120 KKT-10140 KKT-10160

* made to order

mm

mm

pcs.

pcs.

10×100 10×120 10×140 10×160

6.8×105 6.8×125 6.8×145 6.8×165

25 25 25 25

300 300 300 300

www.koelner.pl

29


FRAME Fixings KKS

KKT

KKD

K – min. embedment depth D – plug diameter L – plug length U – max. fixture thickness

MECHANICAL PROPERTIES Concrete Size Plug diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Installation depth Minimum substrate thickness

d d0 dfix h0 hnom hmin

[mm] [mm] [mm] [mm] [mm] [mm]

Solid brick 7.5 MPa

ø8

ø10

ø8

ø10

8 8 9 50 40 80

10 10 11 50 40 80

8 8 9 70 60 80

10 10 11 70 60 80

Performance data in [Kn] Concrete Size Installation depth Characteristic resistance Design resistance Recommended loads for

hnom NRk NRd Nrec cmin smin

[mm] [kN] [kN] [kN] [mm] [mm]

Solid brick 7.5 MPa

ø8

ø10

ø8

ø10

40 1.20 0.60 0.43 50 100

40 2.00 1.00 0.71 50 100

60 0.80 0.40 0.29 50 100

60 1.70 0.90 0.64 50 100

Performance data in [Kg] Concrete Size Installation depth Characteristic resistance Design resistance Recommended loads for

Installation

30

hnom NRk NRd Nrec cmin smin

[mm] [kg] [kg] [kg] [mm] [mm]

Solid brick 7.5 MPa

ø8

ø10

ø8

ø10

40 120.0 60.0 42.9 50 100

40 200.0 100.0 71.4 50 100

60 80.0 40.0 28.6 50 100

60 170.0 90.0 64.3 50 100


FraMe FixinGs WHO

ApprOvAlS

HARDENED SCREWS SUBStrAtE predrilled Ø6:

no predrilling required:

WHS

CONCRETE FRAME SCREWS

with CYlindEr hEAd, hArdEnEd, FOr wOOd

TORX 30

Product code wHS-75052 wHS-75072 wHS-75092 wHS-75112 wHS-75132 wHS-75152 wHS-75182 wHS-75202 wHS-75212

mm

pcs.

7.5×52 7.5×72 7.5×92 7.5×112 7.5×132 7.5×152 7.5×182 7.5×202 7.5×212*

100 100 100 100 100 100 100 100 100

* no approval

with COUntErSUnk hEAd, hArdEnEd, FOr pvC

TORX 30

wHo-75052 wHo-75072 wHo-75092 wHo-75112 wHo-75132 wHo-75152 wHo-75182 wHo-75202 wHo-75212 * no approval

INSTALLATION

Solid Honeycomb aerated Concrete brick 7.5 clay brick concrete C20/25 MPa k3 400

Size Plug diameter d Hole diameter in substrate d0 Hole diameter in fixture dfix Minimum hole depth h0 Installation depth hnom Minimum substrate thickness hmin

[mm] [mm] [mm] [mm] [mm] [mm]

7.5 6 8 40 30 60

7.5 6 8 70 60 90

7.5 6 8 70 60 90

7.5 8 60 90

PERfORMANCE dATA IN [KN]

CONCRETE FRAME SCREWS

Product code

MECHANICAL PROPERTIES

mm

pcs.

7.5×52 7.5×72 7.5×92 7.5×112 7.5×132 7.5×152 7.5×182 7.5×202 7.5×212*

100 100 100 100 100 100 100 100 100

Solid Honeycomb aerated Concrete brick 7.5 clay brick concrete C20/25 MPa k3 400

Size Installation depth tenSIon loaDS Characteristic resistance Design resistance recommended loads

hnom [mm]

30

60

60

60

nrk [kn] nrd [kn] nrec [kn] c [mm] for min smin [mm]

5.10 1.70 1.21 50 100

2.10 0.70 0.50 50 100

0.90 0.30 0.21 50 100

1.10 0.40 0.29 50 100

[kn] [kn] [kn]

5.10 1.70 1.21

2.10 0.70 0.50

0.90 0.30 0.21

1.10 0.40 0.29

SHear loaDS Characteristic resistance Design resistance recommended loads

vrk vrd vrec

PERfORMANCE dATA IN [Kg] Solid Honeycomb aerated Concrete brick 7.5 clay brick concrete C20/25 MPa k3 400

Size Installation depth tenSIon loaDS Characteristic resistance Design resistance recommended loads

hnom [mm]

30

60

60

60

nrk [kg] nrd [kg] nrec [kg] c [mm] for min smin [mm]

510.0 170.0 121.4 50 100

210.0 70.0 50.0 50 100

90.0 30.0 21.4 50 100

110.0 40.0 28.6 50 100

[kg] [kg] [kg]

510.0 170.0 121.4

210.0 70.0 50.0

90.0 30.0 21.4

110.0 40.0 28.6

SHear loaDS Characteristic resistance Design resistance recommended loads

vrk vrd vrec

www.koelner.pl

31


FraMe FixinGs ApprOvAlS

PU ADHESIVE FOR FOAMED POLYSTYRENE

METAL FRAME ANCHORS SUBStrAtE

Product code rPP-FIX

Can size

Content

Efficiency

ml 1000

ml 750

m2 up to 8

DIn 4102 b3

pcs. 12

WIPES k– d– l– U–

min. embedment depth plug diameter plug length max. fixture thickness

Product code rPC-wIPeS

Product code o-10072 o-10092 o-10112 o-10132 o-10152 o-10182 o-10202

mm 10×72 10×92 10×112 10×132 10×152 10×182 10×202

Predrilled hole mm 10 10 10 10 10 10 10

a*

k mm

30 30 30 30 30 30 30

b*

a*

60 60 60 60 60 60 60

40 60 80 100 120 150 170

U mm

pcs. 60

PU FOAM CLEANER b*

pcs.

10 30 50 70 90 120 140

100 100 100 100 100 100 500

A* – concrete;

Product code rPC-0500

Description Cleaner for uncured PU foam

PU FOAM GUN

B* – solid brick.

METAL FRAME ANCHORS MASKING CAP Product code rPP-gUn Product code ko-braZ ko-bIaly

Cap colour

mm

pcs.

pcs.

15 15

100 100

1000 1000

brown white

PRIMERS Product code

Description

Size l

pcs.

rgU-01

Primer emulsion

1

480

rgU-05

Primer emulsion

5

123

5

123

5

123

rgU-05-g rgU-05-k

32

Deep penetrating primer emulsion Primer emulsion – concentrate

pcs. 8

pcs. 1

Can size ml 650

Content ml

pcs. pcs.

500

12

768

pcs. 768


pu FoaMs HANDHELD PU FOAMS APPROVAL

RPS-EKOMAX RPS-EKOMAX-W

RPS RPS-W

Description

Can size ml

Content ml

Efficiency l

DIn 4102

ekoMaX handheld PU Foam ekoMaX handheld PU Foam winter Handheld PU Foam Handheld PU Foam Handheld PU Foam winter Handheld PU Foam winter Handhels PU Foam for PvC Handhels PU Foam for PvC winter

1000 1000 650 650 1000 1000 1000 1000

650 650 500 500 750 750 750 750

up to 40 up to 40 up to 30 up to 30 up to 45 up to 45 up to 45 up to 45

b3 b3 b3 b3 b3 b3 b3 b3

Product code rPS-ekoMaX rPS-ekoMaX-w rPS-500 rPS-500-w rPS rPS-w rPS-PCv rPS-PCv-w

RPS-500 RPS-500-W

RPS-PVC

pcs. 12 12 12 12 12 12 12 12

pcs. 768 768 1152 1152 768 768 768 768

PU GUN FOAMS APPROVAL

RPP-EKOMAX RPP-EKOMAX-W Product code rPP-ekoMaX rPP-ekoMaX-w rPP rPP-w rPP-45 rPP-45-w rPP-65 rPP-65-w rPP-PCv rPP-PCv-w

RPP RPP-W

RPP-45 RPP-45-W

RPP-65 RPP-65-W

Description

Can size ml

Content ml

Efficiency l

DIn 4102

ekoMaX PU gun Foam ekoMaX PU gun Foam winter PU gun Foam PU gun Foam winter PU gun Foam 45l PU gun Foam 45l winter PU gun Foam 65l PU gun Foam 65l winter PU gun Foam for PvC PU gun Foam for PvC winter

1000 1000 1000 1000 1000 1000 1000 1000 1000 1000

720 720 750 750 750 750 840 840 750 750

up to 40 up to 40 up to 42 up to 42 up to 45 up to 45 up to 65 up to 65 up to 45 up to 45

b3 b3 b3 b3 b3 b3 b3 b3 b3 b3

RPS-PVC

pcs. 12 12 12 12 12 12 12 12 12 12

www.koelner.pl

pcs. 768 768 768 768 768 768 768 768 768 768

33


silicones UNIVERSAL SILICONE

Product code

Cap colour

r-Sl-UnI-01 r-Sl-UnI-02 r-Sl-UnI-03 r-Sl-UnI-04

Clear white grey brown

NEUTRAL SILICONE NO 11

Can size ml

pcs.

pcs.

300 300 300 300

15 15 15 15

1260 1260 1260 1260

SANITARY SILICONE

Product code

Cap colour

r-Sl-San-01 r-Sl-San-02 r-Sl-San-03 r-Sl-San-04 r-Sl-San-07

Clear white grey brown black

Cap colour

r-Sl-bUD-01 r-Sl-bUD-02 r-Sl-bUD-03 r-Sl-bUD-04 r-Sl-bUD-07

Clear white grey brown black

Can size ml

pcs.

pcs.

300 300 300 300 300

15 15 15 15 15

1260 1260 1260 1260 1260

Can size ml

pcs.

pcs.

300 300 300 300 300

15 15 15 15 15

1260 1260 1260 1260 1260

r-Sl-lUS-01

Clear

Can size

34

pcs.

300 300 300 300 300

15 15 15 15 15

1260 1260 1260 1260 1260

Product code

Cap colour

r-Sl-Dek-01 r-Sl-Dek-02 r-Sl-Dek-04 r-Sl-Dek-06 r-Sl-Dek-08

Clear white brown brick-red graphite

Can size ml

pcs.

pcs.

300 300 300 300 300

15 15 15 15 15

1260 1260 1260 1260 1260

Product code

Cap colour

r-Sl-Skl-01 r-Sl-Skl-02 r-Sl-Skl-03 r-Sl-Skl-04 r-Sl-Skl-07

Clear white grey brown black

Can size ml

pcs.

pcs.

300 300 300 300 300

15 15 15 15 15

1260 1260 1260 1260 1260

ml

pcs.

pcs.

300

15

1260

Product code

Cap colour

ml

pcs.

pcs.

r-Sl-tk-05 r-Sl-tk-07

red black

300 300

15 15

1260 1260

Can size

ACRYL

MN-79-012

MN-79-011

Mn-79-011 Mn-79-012

pcs.

high tEMpErAtUrE

DISPENSERS

Product code

Clear white grey brown black

ml

SILICONE

FOr MirrOrS

Cap colour

r-Sl-neU-01 r-Sl-neU-02 r-Sl-neU-03 r-Sl-neU-04 r-Sl-neU-07

Can size

GLASS WORK SILICONE

SILICONE GLUE

Product code

Cap colour

ROOF SEALANT

CONSTRUCTION SILICONE

Product code

Product code

mm

pcs.

pcs.

9/23 9/23

12 6

24 24

Product code

Cap colour

r-Sl-Ma-02

white

Can size ml

pcs.

pcs.

310

15

1260


DRYWALL SCREWS, SCREWDRIVERS, COLLATED DRYWALL SCREWS

s

ng

s ll

a

yw

Dr f

s

D

s g i

f

i

y

s m

l

l

e

a

r

y

l l a

y r

w

s y s

D

w

t

i f

s

s

g n

x

m e

s

x

i

s

t

n

r

y

w

a

l

l

y

s

t

e

i

x

i

g

n

s

m

l

al

w

y Dr

s

s

em

t

s sy

s

em

t ys

i fix

s

fix

g in


DRYWALL SCREWS, COLLATED DRYWALL SCREWS

FS and FT drYWALL SCrEWS

DESCRIPTION ямБxing of plasterboard to supporting structures, steel proямБles (FS type), timber laths (FT type)

MATERIAL black phosphate low carbon steel.

PROPERTIES cross-head pH2

 S  S

M

M

 S



M

M

MM

MINMM

MINMM

FS

M

M

MINMM

CM

36

FT


DRYWALL SCREWS, COLLATED DRYWALL SCREWS BuGLE HEAD DRYWALL SCREWS SUBSTrATE

SUBSTrATE

FoR MeTAL Product code

mm 3,5×25 3,5×35 3,5×45 3,5×55 4,2×70 4,8×90 4,8×100 4,8×110 4,8×120

FS-3525 FS-3535 FS-3545 FS-3555 FS-4270 FS-4890 FS-48100 FS-48110 FS-48120

FoR WooD pcs. 1000 1000 500 500 250 250 200 200 200

pcs. 24000 12000 6000 6000 3000 3000 2400 2400 2400

Product code

mm 3,5×25 3,5×35 3,5×45 3,5×55 4,2×70 4,8×90 4,8×100 4,8×110 4,8×120

FT-3525 FT-3535 FT-3545 FT-3555 FT-4270 FT-4890 FT-48100 FT-48110 FT-48120

pcs. 1000 1000 500 500 250 250 200 200 200

pcs. 24000 12000 6000 6000 3000 3000 2400 2400 2400

COLLATED BuGLE HEAD DRYWALL SCREWS SUBSTrATE

SUBSTrATE

FoR MeTAL Product code FSC-3525 FSC-3535

Pcs./strip

mm 3,5×25 3,5×35

50 50

pcs. 1000 1000

FoR WooD pcs. 10000 10000

PAN HEAD SELF DRILLING DRYWALL SCREWS

FTC-3525 FTC-3535 FTC-3545 FTC-3550 FTC-3555

Pcs./strip

mm 3,5×25 3,5×35 3,5×45 3,5×50 3,5×55

50 50 50 50 50

pcs. 1000 1000 1000 1000 1000

pcs. 10000 10000 10000 10000 10000

BuGLE HEAD SELF DRILLING DRYWALL SCREWS

Black phosphate low carbon steel

SUBSTrATE

Product code

SUBSTrATE

Product code WS-3595 WS-3595-oC

mm 3,5×9,5 3,5×9,5

pcs. 1000 1000

pcs. 24000 24000

Low-carbon electro zinc plated steel min. 6 µm. Product code WS-3911 WS-3911-oC

mm 3,9×11 3,9×11

pcs. 1000 1000

Product code WS-3525 WS-3535 WS-3545

mm 3,5×25 3,5×35 3,5×45

pcs. 1000 1000 500

pcs. 18000 12000 6000

pcs. 24000 24000

www.koelner.pl

37


DRYWALL SCREWS, COLLATED DRYWALL SCREWS

FS

WS-3911

WS-3595

WS FT MECHANICAL PROPERTIES Screw type Screw diameter Hole diameter in substrate Installation depth Minimum substrate thickness

d d0 hnom hmin

[mm] [mm] [mm] [mm]

Steel profile

Timber

FS-…

FT-…

3.5

4.2 N/A N/A 0.5

4.8

3.5

Steel profile WS-…

4.2 N/A 16.8 34.0

14.0 28.0

4.8 19.1 38.0

3.5

3.9 N/A N/A 0.75

Performance data in [Kn] FS-… Size Tension load Characteristic resistance Design resistance Recommended loads Pulling out screw head through plasterboard 12 mm Characteristic resistance Design resistance Recommended loads

NRk NRd Nrec

[kN] [kN] [kN]

NRk NRd Nrec

[kN] [kN] [kN]

Ø3.5

Ø4.2

Ø4.8

0.70 0.35 0.25

0.75 0.40 0.29

0.80 0.45 0.32

0.57 0.30 0.21

0.55 0.29 0.21 FT-…

Size Tension load Characteristic resistance Design resistance Recommended loads Pulling out screw head through plasterboard 12 mm Characteristic resistance Design resistance Recommended loads

Ø3.5

Ø4.2

Ø4.8

NRk NRd Nrec

[kN] [kN] [kN]

1.00 0.30 0.21

1.40 0.45 0.32

2.15 0.52 0.37

NRk NRd Nrec

[kN] [kN] [kN]

0.55 0.17 0.12

0.59 0.18 0.13

0.52 0.16 0.11

WS-… Size Pulling out screw head through plasterboard 12 mm Characteristic resistance Design resistance Recommended loads Shearing between two steel sheets Characteristic resistance Design resistance Recommended loads

38

Ø3.5

Ø3.9

NRk NRd Nrec

[kN] [kN] [kN]

1.15 0.60 0.43

1.15 0.60 0.43

NRk NRd Nrec

[kN] [kN] [kN]

2.10 1.15 0.82

1.65 0.90 0.64


DRYWALL SCREWS, COLLATED DRYWALL SCREWS Performance data in [Kg] FS-… Size Tension load Characteristic resistance Design resistance Recommended loads Pulling out screw head through plasterboard 12 mm Characteristic resistance Design resistance Recommended loads

NRk NRd Nrec

[kg] [kg] [kg]

NRk NRd Nrec

[kg] [kg] [kg]

Ø3.5

Ø4.2

Ø4.8

70 35 25

75 40 29

80 45 32

57 30 21

55 29 21 FT-…

Size Tension load Characteristic resistance Design resistance Recommended loads Pulling out screw head through plasterboard 12 mm Characteristic resistance Design resistance Recommended loads

Ø3.5

Ø4.2

Ø4.8

NRk NRd Nrec

[kg] [kg] [kg]

100 30 21

140 45 32

215 52 37

NRk NRd Nrec

[kg] [kg] [kg]

55 17 12

59 18 13

52 16 11 WS-…

Size Pulling out screw head through plasterboard 12 mm Characteristic resistance Design resistance Recommended loads Shearing between two steel sheets Characteristic resistance Design resistance Recommended loads

Ø3.5

Ø3.9

NRk NRd Nrec

[kg] [kg] [kg]

115 60 43

115 60 43

NRk NRd Nrec

[kg] [kg] [kg]

210 115 82

165 90 64

www.koelner.pl

39


HAMMER-IN FIXINGS

FX HAmmEr-IN pLUg

MATERIAL Plug: percussion-resistant Copolymer polypropylene pp; high quality polyamide pA 6.0 (nylon). Nail: electro zinc plated steel ~10 μm.

1 Internal Zig Zag expansion ridges in conjunction with tapered lead in provide maximum expansion.

2 Expansion zone profile along with new screw design aids central screw travel.

3 External profile design optimizes grip in base material.

4 Larger flange and screw head diameter increases fixture hold.

5

40

Thread lock design prevents pre-expansion during transit installation.


HAMMER-IN FIXINGS ApprOvALS

HAMMER-IN FIXINGS

CYLINdrICAL HEAd WITH STEEL NAIL

COUNTErSUNk HEAd WITH STEEL NAIL

SUBSTrATE

SUBSTrATE

Product code Product code Nylon Polypropylene FX-N-05C025 FX-N-05C030 FX-N-05C035 FX-N-05C040 FX-N-06C035 FX-N-06C040 FX-N-06C045 FX-N-06C060 FX-N-06C080 FX-N-08C045 FX-N-08C060 FX-N-08C080 FX-N-08C100 FX-N-08C120 FX-N-08C140 FX-N-08C160

FX-05C025 FX-05C030 FX-05C035 FX-05C040 FX-06C035 FX-06C040 FX-06C045 FX-06C060 FX-06C080 FX-08C045 FX-08C060 FX-08C080 FX-08C100 FX-08C120 FX-08C140 FX-08C160

mm 5 5 5 5 6 6 6 6 6 8 8 8 8 8 8 8

mm 25 30 35 40 35 40 45 60 80 45 60 80 100 120 140 160

mm PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2

pcs. 200 200 200 200 100 200 100 100 100 100 100 50 50 50 50 50

HAMMER-IN FIXINGS

Product code Product code Nylon Polypropylene

pcs. 3600 3600 3600 3600 1800 1800 1800 1800 1800 1200 1200 600 600 600 600 600

FX-N-05l025 FX-N-05l030 FX-N-05l035 FX-N-05l040 FX-N-05l050 FX-N-06l035 FX-N-06l040 FX-N-06l050 FX-N-06l060 FX-N-06l080 FX-N-08l045 FX-N-08l060 FX-N-08l080 FX-N-08l100 FX-N-08l120 FX-N-08l140 FX-N-08l160 N-10l100 N-10l120 N-10l140 N-10l160

FX-05l025 FX-05l030 FX-05l035 FX-05l040 FX-05l050 FX-06l035 FX-06l040 FX-06l050 FX-06l060 FX-06l080 FX-08l045 FX-08l060 FX-08l080 FX-08l100 FX-08l120 FX-08l140 FX-08l160 10l100 10l120 10l140 10l160

mm 5 5 5 5 5 6 6 6 6 6 8 8 8 8 8 8 8 10 10 10 10

mm 25 30 35 40 50 35 40 50 60 80 45 60 80 100 120 140 160 100 120 140 160

mm PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ3 PZ3 PZ3 PZ3

pcs. 200 200 200 200 200 200 200 100 100 100 100 100 50 50 50 50 50 25 25 25 25

HAMMER-IN FIXINGS

ApprOvALS

pcs. 3600 3600 3600 3600 2400 2400 2400 1800 1200 1200 1200 1200 600 600 600 600 600 300 300 300 300 ApprOvALS

WITH mETrIC THrEAd HEAd CONNECTOr SCrEW

mUSHrOOm HEAd WITH STEEL NAIL

SUBSTrATE

SUBSTrATE

Product code Product code Nylon Polypropylene FX-N-06k040 FX-N-06k045 FX-N-06k060 FX-N-06k080

ApprOvALS

HAMMER-IN FIXINGS

FX-06k040 FX-06k045 FX-06k060 FX-06k080

mm 6 6 6 6

mm 40 45 60 80

mm PZ2 PZ2 PZ2 PZ2

pcs. 200 100 100 100

Product code Nylon

pcs. 2400 1800 1200 1200

Product code Polypropylene

FX-N-06l040-M6 FX-06l040-M6

mm 6

mm 40

pcs. 100

pcs. 1800

MECHANICAL PROPERTIES Size Plug diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Installation depth Minimum substrate thickness

d d0 dfix h0 hnom hmin

[mm] [mm] [mm] [mm] [mm] [mm]

ø5

ø6

ø8

5 5 6 35 30 55

6 6 7 35 30 55

8 8 9 45 40 65

www.koelner.pl

41


HAMMER-in FIXINGS Performance data in [Kg]

Performance data in [Kn] Size Installation depth Concrete C20/25 Characteristic resistance Design resistance Recommended loads Solid brick 7.5 MPa Characteristic resistance Design resistance Recommended loads Aerated concrete 600 Characteristic resistance Design resistance Recommended loads

ø5

ø6

ø8

hnom

[mm]

35

35

45

NRk NRd Nrec

[kN] [kN] [kN]

0.40 0.20 0.14

0.70 0.35 0.25

1.00 0.50 0.36

NRk NRd Nrec

[kN] [kN] [kN]

0.40 0.20 0.14

0.60 0.30 0.21

0.70 0.35 0.25

NRk NRd Nrec

[kN] [kN] [kN]

0.30 0.15 0.11

0.45 0.25 0.18

0.50 0.25 0.18

Size Installation depth Concrete C20/25 Characteristic resistance Design resistance Recommended loads Solid brick 7.5 MPa Characteristic resistance Design resistance Recommended loads Aerated concrete 600 Characteristic resistance Design resistance Recommended loads

ø5

ø6

ø8

hnom

[mm]

35

35

45

NRk NRd Nrec

[kg] [kg] [kg]

40 20 14

70 35 25

100 50 36

NRk NRd Nrec

[kg] [kg] [kg]

40 20 14

60 30 21

70 35 25

NRk NRd Nrec

[kg] [kg] [kg]

30 15 11

45 25 18

50 25 18

Installation

ApprovalS

HAMMER-IN FIXINGS ZN-AL ALLOY WITH STEEL NAIL

DESCRIPTION/: For light duty fixings of metal constructions and sheet metal to solid building materials

MATERIAL: Plug sleeve: zamak (Zn-Al). Nail: steel electro-zinc coated ~10 µm.

SUITABLE FOR USE IN: Concrete Masonry Etc.

SUBSTRATE

TYPICAL APPLICATION: • Profiled metal roof and wall cladding.

MECHANICAL PROPERTIES Size

Product code

mm 5 6 6 6 6

KMW-05020 KMW-06030 KMW-06040 KMW-06050 KMW-06065

mm 20 30 40 50 65

mm 12 12 12 12 12

pcs. 200 100 100 100 100

pcs. 3600 1800 1200 1200 1200

Performance data in [Kn]

Plug diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Installation depth Minimum substrate thickness

d d0 dfix h0 hnom hmin

Installation depth Characteristic resistance Design resistance Recommended loads for

42

hnom NRk NRd Nrec cmin smin

[mm] [kN] [kN] [kN] [mm] [mm]

ø5

ø6

5 5 6 25 20 40

6 6 7 35 30 50

Performance data in [KG] KMW-06…

Substrate

[mm] [mm] [mm] [mm] [mm] [mm]

KMW-06…

Non-cracked concrete C20/25

Solid brick 15 MPa

30 3.55 1.40 1.00 50 100

30 2.00 0.80 0.57 50 100

Substrate Installation depth Characteristic resistance Design resistance Recommended loads for

hnom NRk NRd Nrec cmin smin

[mm] [kg] [kg] [kg] [mm] [mm]

Non-cracked concrete C20/25

Solid brick 15 MPa

30 355 140 100 50 100

30 200 80 57 50 100


PLASTERBOARD AND CAVITY FIXINGS HAMMER-IN FIXINGS

Long Expansion Zone Hammer Fixings with Countersunk Head and Steel Nail DESCRIPTION/: For fast, repetitive fixing with minimal screwdriver work. MATERIAL: Plug sleeve: impact resistant co-polymer of polypropylene PP or polyamide PA 6.0 (Nylon). Nail: steel electro-zinc coated ~10 µm.

FEATURES: • Reinforced screwhead - facilitates high knock-in loads with the added benefit of plug neck grip. • Hammer in drive screw for fast installation. • Deforming crumple zone allows quick adjustment in uneven surfaces. • Extended expansion zone gives extra grip.

SUITABLE FOR USE IN: Lightweight concrete Cellular brick Hollow brick Etc. TYPICAL APPLICATION: • Fixing stud battens to walls before cladding.

• Fixing long runs of shelf supports.

• Fixing skirting boards to walls.

SUBSTRATE

Product code

mm 8 8 8

KWD-08L100 KWD-08L120 KWD-08L140

mm 100 120 140

mm PZ2 PZ2 PZ2

pcs. 50 50 50

pcs. 600 600 600

Installation

PLASTERBOARD FIXINGS DESCRIPTION/: No drill required – simply pierce paper skin and screw home. Can be used in single and double thickness plasterboard. Ideal for use with either a power or standard Pozi Driv screwdriver. Must only be used with screws provided.

FEATURES: • Flange prevents accidental push through in plasterboard. • Short length ideally suited for dry-lined walls.

TYPICAL APPLICATION: • Securing wall and ceiling fittings, installing hooks and brackets etc. • Fixing electrical boxes, sanitary ware, cable trunking etc. • Installing shelving units and wooden battens.

SUITABLE FOR USE IN: Plasterboard

SUBSTRATE

DRA-01PLUS

DRA-01 Product code DRA-01 DRA-02 DRA-03

DRA-02 mm 14 14 14

DRA-02PLUS

DRA-03 mm 22 28 32

pcs. 100 100 100

pcs. 1800 1800 1800

Product code DRA-01PLUS DRA-02PLUS DRA-03PLUS

mm 14 14 14

DRA-03PLUS

mm 22 28 32

pcs. 100 100 100

pcs. 1800 1800 1800

Installation

www.koelner.pl

43


PLASTERBOARD AND CAVITY FIXINGS METAL CAVITY FIXINGS DESCRIPTION: Fixing heavy objects securely in a variety of board materials. Fixtures can be removed and re-fitted, eg when moving radiators for redecoration. Can be secured using slotted or Pozi Driv screwdriver.

FEATURES: • Combination head screw supplied. • Integral anti-rotation lugs. • Hinged legs positioned to maximise load capacity. • One piece stamping, with integral thread and flange for increased reliability.

SUBSTRATE

SM

Product code with slotted screw SM-04020 SM-04032 SM-04046 SM-04059 SM-05037 SM-05052 SM-05065 SM-06037 SM-06052 SM-06065 SM-06080 SM-08080 with angle hook SM-04032K with round hook SM-04032S

SUITABLE FOR USE IN: Plasterboard Hardboard & Plywood. TYPICAL APPLICATION: • Coat hooks to hollow doors. • Shelves and bathroom accessories to standard plasterboard. • Radiators and kitchen cabinets to double thickness and tiled plasterboard.

SM-04032S

SM-04032K

mm

mm

mm

pcs.

pcs.

8 8 8 8 11 11 11 13 13 13 13 13

4×25 4×40 4×54 4×66 5×46 5×61 5×73 6×46 6×61 6×73 6×90 8×90

3-5 4-10 15-21 34-38 6-12 6-16 16-30 8-12 8-18 16-30 32-45 32-45

100 100 100 100 100 100 100 100 100 50 50 50

1800 1800 1800 1800 1800 1800 1200 1200 1200 600 600 600

8

M4×55

4-10

100

1800

8

M4×70

4-10

100

1800

Installation

METAL CAVITY FIXINGS SETTING TOOLS

DIY

professional

Product code AT-88M AT-88-RAWL

44

DIY professional

pcs. 1 1


PLASTERBOARD AND CAVITY FIXINGS CAVITY FIXINGS

SPRING TOGGLES

DESCRIPTION: Medium duty plasterboard fixing. Fixtures can be removed and replaced for redecoration.

DESCRIPTION: Cavity fixing with long threaded screw, ideal for double thickness plasterboard and large fixtures.

MATERIAL: Plug sleeve: impact resistant co-polymer of polypropylene PP or polyamide PA 6.0 (Nylon). Nail: steel electro-zinc coated ~10 µm.

FEATURES: • Machine screw for ease of tightening. • Heavy gauge material for superior loads. • Spreads load over wide area for extra load capacity. • Heavy gauge nut to prevent stripping under load..

SUITABLE FOR USE IN: Plasterboard Hardboard Plywood

SUITABLE FOR USE IN: Plasterboard Lathe and plaster Plywood Hardwood

TYPICAL APPLICATION: • Securing bathroom and kitchen fittings. • Installation of ceiling fixtures, such as light fittings. • Fixing light shelving, brackets and hooks.

TYPICAL APPLICATION: • Installing overhead lights, ceiling fans and other fixtures.

SUBSTRATE

SUBSTRATE

08G

10G SPO450

08GL

SPO475Z

10GL

SPO475 08GK

Product code

mm mm 08G 8 3,5×35 10G 10 4,0×50 with countersunk cross-head screw PZ2 08GL 8 3,5×45 10GL 10 4,0×60 with angle hook 08GK 8 3,5×35 10GK 10 4,0×50

Installation

10GK

mm 12,5 9,5

pcs. 100 100

pcs. 1800 1800

12,5 9,5

100 100

1800 1800

12,5 9,5

100 100

1800 1800

Product code

mm with pan head metric screw SPO450 14 with eye SPO475Z 14 with round hook SPO475 14

mm

pcs.

pcs.

4×50

50

900

4×75

50

900

4×75

50

900

Installation

www.koelner.pl

45


METAL HAMMER FIXINGS, HANGERS, CHANEL CONNECTORS ApprOvALS

BRASS ANCHOR WITH HOOk

SLEEVE ANCHOR WITH HOOk SUBSTrATE

Product code kTS-08050

SUBSTrATE

mm 8

mm 40

pcs. 50

Product code

pcs. 600

mm 6

TMS-05

INSTALLATION

mm 20

pcs. 100

INSTALLATION

CEILING WIRE HANGER deSCRIPTIoN/: Mainly for fixing lightweight ceilings and suspended ceilings to solid building materials. Fire resistant

MATeRIAl: electro-zinc coated steel.

TYPICAl APPlICATIoN: • lightweight suspended ceilings.

SUBSTrATE

Product code SRS-06063

INSTALLATION

46

SuITAble FoR uSe IN: Concrete Masonry etc.

mm 6

mm 63

pcs. 100

pcs. 2400

pcs. 1800


METAL HAMMER FIXINGS, HANGERS, Chanel ConnectorS Ceiling Spring Pin

Suspended Wires

Double Spring Securing Clip

DESCRIPTION: Mainly for fixing lightweight ceilings and suspended ceilings to solid building materials. Fire resistant. MATERIAL: steel 4.6 - electro-zinc coated ~10 µm . SUITABLE FOR USE IN: Concrete Masonry Etc.

Product code Z-WD

TYPICAL APPLICATION: • Lightweight suspended ceilings. Product code Z-KSP

mm 8

mm 42

pcs. 100

kg 1,23

Frame Fitting Set

pcs. 100

Installation Product code Product code

Ceiling Wedge Anchor

ApprovalS

DESCRIPTION: Mainly for fixing lightweight ceilings and suspended ceilings to solid building materials. Fire resistant. MATERIAL: steel 4.6 - electro-zinc coated ~10 µm .

with eye Z-L-0125-O Z-L-0250-O Z-L-0500-O Z-L-0750-O Z-L-1000-O Z-L-1500-O with hook Z-L-0125-H Z-L-0250-H Z-L-0500-H Z-L-0750-H Z-L-1000-H Z-L-1500-H

mm

pcs.

kg

125 250 500 750 1000 1500

100 100 100 100 100 100

1,6 2,8 5,3 7,8 10,0 15,3

125 250 500 750 1000 1500

100 100 100 100 100 100

1,6 2,8 5,3 7,8 10,0 15,3

mm 6 6

mm 40 65

pcs. 50

pcs. 1200

Angle Sections for door frame profile installation

pcs. 48 48 48

Z-KDP50 Z-KDP75 Z-KDP100

TYPICAL APPLICATION: • Lightweight suspended ceilings.

GS-06040 GS-06065

mm M8×20

Product code

SUITABLE FOR USE IN: Concrete Masonry Etc.

Product code

SZNP-08020

Universal Direct Bracket

flexible Direct Bracket

pcs. pcs. 100 1800 100 1200

Installation

Product code Z-ES-50/070 Z-ES-50/120 Z-ES-60/070 Z-ES-60/120

pcs. 250 250 250 250

kg 3,20 4,70 3,30 4,80

Product code Z-UE30 Z-UE65 Z-UE90

pcs. 100 100 100

www.koelner.pl

kg 3,85 5,46 6,40

47


Chanel ConnectorS, ANGLE SECTIONS Universal Timber Connector

Direct Timber Connector

Fasteners for Suspended Ceilings Upper Adjustable Length HAnger Product code

Product code Z-WP170 Z-WP270

mm 170 270

pcs. 100 100

kg 3,40 5,80

Product code Z-WKP170

Z-N-G0200 Z-N-G0300 mm 170

pcs. 100

kg 3,10

CHANEL Connector

Universal Timber Connector

Z-WP170B

mm 170

pcs. 100

kg 3,40

Z-LW

Chanel Hanger with Spring Clip

pcs. 100

kg 4,50

Chanel Hanger with Spring Clip

kg 4,60 6,30

Rotary Chanel hAnger with Adjustable Length

Z-N-WOBR

Product code

pcs. 100 100

* other lengths available

Product code

Product code

L mm 200 300

pcs. 100

kg 4,90

Termatex Hanger with Adjustable Length

Product code Z-N-WT

pcs. 100

kg 3,80

Hanger Clip

Product code Z-N-KLM Product code Z-WK

pcs. 100

kg 3,75

Product code Z-WKB

Rotary Chanel Hanger

pcs. 100

kg 2,45

pcs. 100

kg 0,61

Flush Transverse Connector

Termatex Hanger WITH SPRING CLIP

with Single Spring Clip

Product code Z-LPJ

pcs. 100

kg 5,20

Chanel Intersection Connector

Product code Product code Z-WOBR

48

pcs. 100

kg 4,80

Z-UE30 Z-UE65 Z-UE90

pcs. 100 100 100

kg Product code Z-LKRZ

pcs. 100

kg 3,35


PLASTER & DRY-WALL BEADS ALuMINIuM CORNER BEAD

Product code NAl-20 NAl-25 NAl-30

cm 200 250 300

ALuMINIuM CORNER HALF-BEAD

pcs. 200 200 200

PVC PLASTERBOARD FINISHING BEAD

Product code NAl-P-25

cm 250

pcs. 50

PVC TRuNKING BEAD

Product code Nbo2-30 Nbo3-30 Nbo5-30

* box

PVC CORNER ARCH BEAD

Width mm 20 30 50

cm 300 300 300

pcs. 20 20 20

WET PLASTER BEAD

ALU

Product code Ngk125-25

* box

cm 250

pcs. 25

PVC

Product code NAluk-30

ALuMINIuM PLINTH BEAD

cm 300

pcs. 50

PVC uNIVERSAL CORNER BEAD – ROLL

Product code W6-25 W6-30 W10-25 W10-30

* box

Product code PC-53/25 PC-83/25 PC-103/25 PC-123/25 PC-153/25

cm 250 250 250 250 250

pcs. 10 10 10 10 10

Product code NuNI-75

cm 250 300 250 300

pcs. 25 25 25 25

WET PLASTER STEEL CORNER cm 750

pcs. 1

Product code NAlM-25 NAlM-30 NAlM-25/50 NAlM-30/50

cm 250 300 250 300

www.koelner.pl

pcs. 20 25 20 20

49


THERMAL INSuLATION BEADS PVC WINDOW SEALING BEAD

PVC uNDER SILL BEAD WITH mESH

INTErNAL

Product code Nlu6-14 Nlu6-24 Nlu9-24

Product code mm 6 6 9

cm 140 240 240

ALuMINIuM CORNER BEAD

pcs. 60 60 60

cm 200

NPAR-20

WITH mESH

pcs. 30

Product code

* box

PVC CORNER BEAD

* box

WITH mESH

NAlS-25 NAlS-30

cm 250 300

pcs. 20 20

TAPES

PVC WINDOW SEALING BEAD 1.2

WITH mESH

23

SELF-AdHESIvE jOINT TApE Product code Product code Nlok-14 Nlok-16 Nlok-24 Nlok-25**

* box; ** with seal

cm 140 160 240 250

pcs. 25 25 25 25

NAPS-25

cm 250

Mesh hole size mm 10×10

Product code pcs. 20

* box

gkT-P20 gkT-P45 gkT-P90

m 20 45 90

pcs. 72 48 24

PVC EXPANSION JOINT CONTROL LATH WITH mESH

NDYL

DRIP CORNER BEAD

ACOUSTIC FOAm TApE*

WITH mESH

Product code

NDYL-N

gkT-A30 gkT-A50 gkT-A70 gkT-A95

mm 3×30 3×50 3×70 3×95

pcs. 8 8 5 4

* lenght 30 m

Product code NkAP-20 NkAP-25 * box

cm 200 250

pcs. 25 25

Product code NdYl-20 NdYl-25 NdYl-N-20 NdYl-N-25 * box

50

cm 200 250 200 250

pcs. 25 25 25 25

FIBrEgLASS jOINT TApE Product code gkT-S25

m 25

pcs. 40


gs

in

s g i

f

i

n

t l

i

m

r he

m r e t e

de

d a c

a

a F

f

i

h

e

r

m

l

a

l

a

s

n

i x

n

n

s

g

i

o

l

s

o

i

n

f

i

u

n

a

u

t

l

i

m r

a

n

s

i

t

x

i

g

c Fa

h

t

al

n

l a

l

u ns

a

u s

i

o

i

n

n

io at

x

s

g in

ca

Fa

th

fix

in

m

er

de

al

n

io

at

l su F

a

fix t

c

a

d

e

h

e

r

m

a

l

i

n

s

u


Facade Thermal InsulaTIon FIxIngs

TFIX-8M insUlaTion fiXing

maTerIal plug sleeve: impact resistant copolymer of polypropylene PP, nail pin: electro zinc plated pin, head coating: Polyamid Pa 6.0 (nylon) reinforced with fiber glass.

1

excellent thermal insulating properties long overmoulding of metal pivot prevents occurrence of thermal bridges and limits heat loss below 0,002 W/m2K.

2

no moisture penetration or nail corrosion effect Precise design of the pivot overmoulding and ideally adjusted internal profile of the pin guarantee tightness of connection after assembly.

3

no effect of glue bulging or breaking on the facade. increased stiffness of the plate and pin according to guidelines of the eTiCs system is the guarantee of successful utilization of each facade.

4

ring nail Complete immobilization of the connector after the assembly process reducing vibration and horizontal movements of anchoring.

5

short assembly time The smallest depth of anchoring: 25 mm cheaper product 25 mm anchoring instead of standard depth 40 mm results in 10% saving on the product cost.

6

m

8m

52

european standard Diameter 8 mm compliant with european standards – higher economy of work and less interferences with the base.


FACADE THERMAL INSULATION FIXINGS APPROVAL

KI-10 INSULATION FIXINGS WITH HAMMER IN NYLON PIN

ETA-07/0291

MATERIAL:

INSTALLATION RECOMMENDATIONS:

Plug Sleeve: impact resistant copolymer of polypropylene PP Nail Pin: polyamide PA 6.0 (Nylon) reinforced with fibre glass.

INSULATION MATERIAL

drill diameter: 10 mm minimum embedment depth: ETA 25 mm

SUBSTRATE

MECHANICAL PROPERTIES Substrate Fixing diameter Hole diameter in substrate Minimum hole depth Installation depth Minimum substrate thickness

d d0 h0 hnom hmin

Concrete

Solid brick 20 MPa

10 10 35 25 100

10 10 35 25 100

[mm] [mm] [mm] [mm] [mm]

60

60

10

10

PERFORMANCE DATA IN [KN] Size 25

25 L

Installation depth Characteristic resistance Design resistance Recommended loads

L

Product code

L mm

KI-070 KI-090 KI-120 KI-140 KI-160 KI-180 KI-200 KI-220

70 90 120 140 160 180 200 220

mm 40 60 90 110 130 150 170 190

pcs. 250 250 250 250 250 250 250 250

hnom NRk NRd Nrec

[mm] [kN] [kN] [kN]

Concrete C12/15

Concrete ≥C16/20

Solid brick 20MPa

25 0.50 0.25 0.18

25 0.60 0.30 0.21

25 0.50 0.25 0.18

Concrete C12/15

Concrete ≥C16/20

Solid brick 20MPa

25 50 25 18

25 60 30 21

25 50 25 18

PERFORMANCE DATA IN [KG] Size Installation depth Characteristic resistance Design resistance Recommended loads

hnom NRk NRd Nrec

[mm] [kg] [kg] [kg]

INSTALLATION

www.koelner.pl

53


FACADE THERMAL INSULATION FIXINGS APPROVAL

KI-10M INSULATION FIXINGS WITH HAMMER IN STEEL PIN

AT-15-8091/2009

MATERIAL:

INSTALLATION RECOMMENDATIONS:

Plug Sleeve: impact resistant copolymer of polypropylene PP Nail Pin: electro zinc plated pin.

INSULATION MATERIAL

ETA-07/0291

drill diameter: 10 mm minimum embedment depth: ETA 25 mm

SUBSTRATE

MECHANICAL PROPERTIES Substrate Fixing diameter Hole diameter in substrate Minimum hole depth Installation depth Minimum substrate thickness

d d0 h0 hnom hmin

Concrete

Solid brick 20 MPa

10 10 35 25 100

10 10 35 25 100

[mm] [mm] [mm] [mm] [mm]

25

Size

25 L

54

L

Product code

L mm

KI-090M KI-120M KI-140M KI-160M KI-180M KI-200M KI-220M KI-260M

90 120 140 160 180 200 220 260

INSTALLATION

60

60

10

10

PERFORMANCE DATA IN [KN]

Installation depth Characteristic resistance Design resistance Recommended loads mm 60 90 110 130 150 170 190 230

pcs. 250 250 250 250 250 250 250 200

hnom NRk NRd Nrec

[mm] [kN] [kN] [kN]

Concrete C12/15

Concrete ≥C16/20

Solid brick 20MPa

25 0.50 0.25 0.18

25 0.75 0.38 0.27

25 0.50 0.25 0.18

Concrete C12/15

Concrete ≥C16/20

Solid brick 20MPa

25 50 25 18

25 75 38 27

25 50 25 18

PERFORMANCE DATA IN [KG] Size Installation depth Characteristic resistance Design resistance Recommended loads

hnom NRk NRd Nrec

[mm] [kg] [kg] [kg]


FACADE THERMAL INSULATION FIXINGS APPROVAL

KI-10N LONG EXPANSION ZONE INSULATION FIXING WITH HAMMER IN STEEL PIN WITH PLASTIC COATED HEAD

MATERIAL:

Plug Sleeve: impact resistant copolymer of polypropylene PP Nail Pin: electro zinc plated pin. Head coating: polyamide PA 6.0 (Nylon) reinforced with ďŹ ber glass. INSULATION MATERIAL

ETA-07/0221

INSTALLATION RECOMMENDATIONS: drill diameter: 10 mm minimum embedment depth: ETA 25 mm

SUBSTRATE

MECHANICAL PROPERTIES Substrate Fixing diameter Hole diameter in substrate Minimum hole depth Installation depth Min. substrate thickness

d d0 h0 hnom hmin

[mm] [mm] [mm] [mm] [mm]

Solid Honeycomb Lightweight Aerated brick clay brick concrete concrete 20MPa 12MPa 10MPa 500 10 10 10 10 10 10 10 10 70 70 70 70 60 60 60 60 100 100 100 100

60 60

60

10 10

10

PERFORMANCE DATA IN [KN] Size

60 60

L

60 L

L

Product code

L mm

KI-120N KI-140N KI-160N KI-180N KI-200N KI-220N KI-260N KI-300N

120 140 160 180 200 220 260 300

mm 50 70 90 110 130 150 190 230

pcs. 250 250 250 250 250 250 200 200

Installation depth hnom Characteristic resistance NRk Design resistance NRd Recommended loads Nrec

[mm] [kN] [kN] [kN]

Solid Honeycomb Lightweight Aerated brick clay brick concrete concrete 20MPa 12MPa 10MPa 500 60 60 60 60 0.90 0.40 0.30 0.90 0.45 0.20 0.15 0.45 0.32 0.14 0.11 0.32

PERFORMANCE DATA IN [KG] Size Installation depth hnom Characteristic resistance NRk Design resistance NRd Recommended loads Nrec

[mm] [kg] [kg] [kg]

Solid Honeycomb Lightweight Aerated brick clay brick concrete concrete 20MPa 12MPa 10MPa 500 60 60 60 60 90 40 30 90 45 20 15 45 32 14 11 32

INSTALLATION

www.koelner.pl

55


FACADE THERMAL INSULATION FIXINGS APPROVAL

KI-10NS LONG EXPANSION ZONE INSULATION FIXINGS WITH SCREW IN STEEL PIN WITH PLASTIC COATED HEAD

MATERIAL:

Plug Sleeve: impact resistant copolymer of polypropylene PP Nail Pin: electro zinc plated pin Head Coating: polyamide PA 6.0 (Nylon) reinforced with ďŹ ber glass.

INSULATION MATERIAL

ETA-07/0221

INSTALLATION RECOMMENDATIONS: drill diameter: 10 mm minimum embedment depth: ETA 60 mm

SUBSTRATE

MECHANICAL PROPERTIES Substrate Fixing diameter Hole diameter in substrate Minimum hole depth Installation depth Min. substrate thickness

d d0 h0 hnom hmin

[mm] [mm] [mm] [mm] [mm]

Solid Honeycomb Lightweight Aerated brick clay brick concrete concrete 20MPa 12MPa 10MPa 500 10 10 10 10 10 10 10 10 70 70 70 70 60 60 60 60 100 100 100 100

PERFORMANCE DATA IN [KN]

60

56

Installation depth hnom Characteristic resistance NRk Design resistance NRd Recommended loads Nrec

60 L

L

Product code

L mm

KI-140NS KI-160NS KI-180NS KI-200NS KI-220NS KI-260NS KI-300NS

140 160 180 200 220 260 300

INSTALLATION

60

60

10

10

Size

mm 70 90 110 130 150 190 230

pcs. 250 250 250 250 250 200 200

[mm] [kN] [kN] [kN]

Solid Honeycomb Lightweight Aerated brick clay brick concrete concrete 20MPa 12MPa 10MPa 500 60 60 60 60 1.20 0.40 0.30 0.75 0.60 0.20 0.15 0.38 0.43 0.14 0.11 0.27

PERFORMANCE DATA IN [KG] Size Installation depth hnom Characteristic resistance NRk Design resistance NRd Recommended loads Nrec

[mm] [kg] [kg] [kg]

Solid Honeycomb Lightweight Aerated brick clay brick concrete concrete 20MPa 12MPa 10MPa 500 60 60 60 60 120 40 30 75 60 20 15 38 43 14 11 27


FACADE THERMAL INSULATION FIXINGS APPROVAL

TFIX-8M INSULATION FIXINGS WITH HAMMER IN STEEL PIN WITH PLASTIC COATED HEAD

MATERIAL:

INSTALLATION RECOMMENDATIONS:

Plug Sleeve: impact resistant copolymer of polypropylene PP Nail Pin: electro zinc plated pin Head Coating: polyamide PA 6.0 (Nylon) reinforced with fiber glass.

INSULATION MATERIAL

ETA-07/0336

drill diameter: 8 mm minimum embedment depth: ETA 25 mm

SUBSTRATE

MECHANICAL PROPERTIES Concrete ≥C12/15

25

25

L

L

25

Fixing diameter Hole dia. in substrate Minimum hole depth Installation depth Min. substrate thickness 60

60

60

8

8

8

Substrate d d0 h0 hnom hmin

L mm

TFIX-8M-095 TFIX-8M-115 TFIX-8M-135 TFIX-8M-155 TFIX-8M-175 TFIX-8M-195 TFIX-8M-215 TFIX-8M-235 TFIX-8M-255 TFIX-8M-275 TFIX-8M-295

95 115 135 155 175 195 215 235 255 275 295

mm 60 80 100 120 140 160 180 200 220 240 260

8 8 35 25 100

8 8 35 25 100

8 8 35 25 100

8 8 35 25 100

8 8 35 25 100

8 8 35 25 100

PERFORMANCE DATA IN [KN]

L

Concrete ≥C12/15

Substrate Product code

[mm] 8 [mm] 8 [mm] 35 [mm] 25 [mm] 100

Solid Structural Silicate Silicate Solid lightweight Hollow lightbrick hollow clay tile brick hollow brick concrete weight concrete 12 grade 12 grade 12 grade 12 grade DIN 18152 DIN 18151

pcs. 200 200 200 200 200 200 100 100 100 100 100

Installation depth Characteristic resistance Design resistance Recommended loads

hnom NRk NRd Nrec

[mm] 25 [kN] 1.50 [kN] 0.75 [kN] 0.54

Solid Structural Silicate Silicate Solid lightweight Hollow lightbrick hollow clay tile brick hollow brick concrete weight concrete 12 grade 12 grade 12 grade 12 grade DIN 18152 DIN 18151

25 1.50 0.75 0.54

25 0.60 0.30 0.21

25 1.50 0.75 0.54

25 0.90 0.45 0.32

25 0.50 0.25 0.18

25 0.50 0.25 0.18

PERFORMANCE DATA IN [KG] Concrete ≥C12/15

Size Installation depth Characteristic resistance Design resistance Recommended loads

hnom NRk NRd Nrec

[mm] 25 [kg] 150 [kg] 75 [kg] 54

Solid Structural Silicate Silicate Solid lightweight Hollow lightbrick hollow clay tile brick hollow brick concrete weight concrete 12 grade 12 grade 12 grade 12 grade DIN 18152 DIN 18151

25 150 75 54

25 60 30 21

25 150 75 54

25 90 45 32

25 50 25 18

25 50 25 18

INSTALLATION

www.koelner.pl

57


Facade Thermal InsulaTIon FIxIngs Kwl InsulaTIon holdIng Flange aPProval

MATERIAL:

Polyamide PA 6.0 (nylon) reinforced with fibre glass, impact resistant copolymer of polypropylene PP. insUlaTion MaTerial

eTa-07/0221 eTa-07/0291 eTa-07/0336

Ø 140 mm

sUBsTraTe for all type of base material

KWL-140 Product code

mm polyamide PA 6.0, reinforced with fibre glass KWL-90 90 KWL-110 110 KWL-140 140 impact resistant copolymer of polypropylene KWL-90-PP 90 KWL-140-PP 140

KWL-110

pcs. 250 200 200 250 200

KWL-90

INSTALLATION

aPProval

Facade InsulaTIon FIxIngs in Bags

Product code

L mm

mm

pcs.

Insulation fixings with hammer in nylon pin 90 60 B-W-KI-090 100 120 90 B-W-KI-120 100 140 110 B-W-KI-140 100 160 130 B-W-KI-160 100 180 150 B-W-KI-180 100 200 170 B-W-KI-200 100

58

Product code

L mm

mm

pcs.

Insulation fixings with hammer in steel pin 90 60 B-W-KI-090M 100 120 90 B-W-KI-120M 100 140 110 B-W-KI-140M 100 160 130 B-W-KI-160M 100 180 150 B-W-KI-180M 100 200 170 B-W-KI-200M 100


Facade Thermal InsulaTIon FIxIngs Kc InsulaTIon Flange

aPProval

WiTh MasKing CaP

insUlaTion MaTerial

aT-15-4627/2006

sUBsTraTe

MATERIAL:

Impact resistant copolymer of polypropylene PP.

INSTALLATION RECOMMENDATIONS:

60

minimum embedment depth: timber – 20 mm, steel – 0.75 mm

KC + UC

applicable to: • UC – screws for wood • WB – screws for trapezoid sheet

KC + WB

15

Product code KC

MECHANICAL PROPERTIES Substrate Fixing type Fixing diameter Hole diameter in substrate Minimum hole depth Installation depth Minimum substrate thickness Maximum substrate thickness

Steel d d0 h0 hnom hmin hmax

KC + [mm] [mm] [mm] [mm] [mm] [mm]

Timber

Plywood

WB 4.8 N/A N/A N/A 0.75 2.5

5.0 N/A N/A 20 20 -

UC-05 5.0 N/A N/A 20 20 -

Steel

60

OSB chipboard

5.5

200

Timber

Plywood

OSB chipboard

5.0 N/A N/A 18 18 -

6.0 N/A N/A 25 25 -

UC-06 6.0 N/A N/A 20 20 -

6.0 N/A N/A 18 18 -

OSB chipboard

Timber

Plywood

OSB chipboard 18 0.80 0.40 0.29

PERFORMANCE DATA IN [KN] Substrate Fixing type Installation depth Characteristic resistance Design resistance Recommended loads

hnom NRk NRd Nrec

KC + [mm] [kN] [kN] [kN]

Timber

Plywood

WB ≥0,75 0.90 0.45 0.32

20 0.70 0.35 0.25

UC-05 20 0.70 0.35 0.25

18 0.70 0.35 0.25

25 0.80 0.40 0.29

UC-06 20 0.80 0.40 0.29

Steel

Timber

Plywood

OSB chipboard

Timber

Plywood

OSB chipboard

20 70 35 25

UC-05 20 70 35 25

25 80 40 29

UC-06 20 80 40 29

18 80 40 29

PERFORMANCE DATA IN [KG] Substrate Fixing type Installation depth Characteristic resistance Design resistance Recommended loads

hnom NRk NRd Nrec

KC + [mm] [kN] [kN] [kN]

WB ≥0,75 90 45 32

18 70 35 25

INSTALLATION

www.koelner.pl

59


Facade Thermal InsulaTIon FIxIngs aPProval

mKI FIre resIsTanT meTal InsulaTIon supporTs insUlaTion MaTerial

sUBsTraTe

aT-15-8092/2009

MATERIAL:

electro zinc plated steel, stainless steel (made to order).

INSTALLATION RECOMMENDATIONS: drill diameter: 8 mm minimum embedment depth: ETA 50 mm MECHANICAL PROPERTIES Concrete Solid brick ≥C20/25 15 grade

Substrate MKI

Fixing diameter Hole diameter in substrate Minimum hole depth Installation depth Min. substrate thickness

MKC

d d0 h0 hnom hmin

[mm] [mm] [mm] [mm] [mm]

8 8 60 50 100

8 8 60 50 100

Solid Silicate lightweight brick concrete 15 grade 600 8 8 8 N/A 60 N/A 50 50 100 100

PERFORMANCE DATA IN [KN] Concrete Solid brick ≥C20/25 15 grade

40

Size

50 L

80

9,8

42

2,4

INSTALLATION

60

50

50

[kN] [kN] [kN]

0.88 0.34 0.24

0.66 0.22 0.16

0.94 0.32 0.23

0.82 0.26 0.19

[kN] [kN] [kN]

0.94 0.37 0.26

0.76 0.26 0.19

0.88 0.30 0.21

0.89 0.29 0.21

PERFORMANCE DATA IN [KG]

4,4

pcs. 250 250 250 250 250

mm 30 50 80 110 140

mm 90 110 140 170 200

MKI-090/8 MKI-110/8 MKI-140/8 MKI-170/8 MKI-200/8

MKC-80

[mm]

Concrete Solid brick ≥C20/25 15 grade

Size

Product code

Product code

Installation depth hnom CARBON STEEL FAILURE Characteristic resistance NRk Design resistance NRd Recommended loads Nrec STANILESS STEEL FAILURE Characteristic resistance NRk Design resistance NRd Recommended loads Nrec

aPProval

mm 80

pcs. 250

Solid Silicate lightweight brick concrete 15 grade 600 50 50

Installation depth hnom CARBON STEEL FAILURE Characteristic resistance NRk Design resistance NRd Recommended loads Nrec STANILESS STEEL FAILURE Characteristic resistance NRk Design resistance NRd Recommended loads Nrec

Solid Silicate lightweight brick concrete 15 grade 600 50 50

[mm]

50

50

[kN] [kN] [kN]

88 34 24

66 22 16

94 32 23

82 26 19

[kN] [kN] [kN]

94 37 26

76 26 19

88 30 21

89 29 21


Facade Thermal InsulaTIon FIxIngs KIK InsulaTIon supporTs insUlaTion MaTerial

AREA OF USE:

sUBsTraTe

for fixing insulation boards not exposed to the influence of wind suction forces, ex.: insulation of foundations and basement walls, window and door reveals, building plinths

Product code KIK-070 KIK-090

mm 70 90

mm 35 35

pcs. 400 500

28,5

28,5

INSTALLATION RECOMMENDATIONS: L

spacers

drill diameter: 8 mm minimum embedment depth: 28.5 mm

L

hr scaFFoldIng hooKs

Product code Product code PD-03 PD-05 PD-08 PD-10 PD-15

Impact resistant copolymer of polypropylene PP 35

35

9

9

MATERIAL:

Thickness mm 3 5 8 10 15

pcs. 25 25 25 25 25

HR-12120 HR-12160 HR-12190 HR-12230 HR-12300 HR-12350

mm 120 160 190 230 300 350

pcs. 25 25 25 25 25 25

hrK expansIon plugs

plasTIc cuTTer

sUBsTraTe

Product code KFS

mm 68

pcs. 1

KES

mm 68

HRK-14070 HRK-14100 HRK-14135

mm 70 100 135

pcs. 25 25 25

masonry connecTor

polysTyrene cap

Product code

Product code

pcs. 250

Product code KMV-300/5

SIze mm 5×300

www.koelner.pl

pcs. 250

61


Facade Thermal InsulaTIon FIxIngs KwB hammer In wall TIes

35 mm

50 mm L

Product code Wall tie diameter 4.0 mm KWB-4/160 KWB-4/210 KWB-4/250 KWB-4/275 KWB-4/300 KWB-4/350 KWB-4/400

L

Cavity spacing

mm

mm

mm

pcs.

135 185 225 250 275 325 375

35 85 125 150 175 225 275

45 85 110 135 185 235

250 250 250 250 250 250 250

long expansIon Zone expansIon plugs

expansIon plugs for KWB Wall Ties

for KWB Wall Ties

Product code

mm blue colour for wall ties of diameter 4.0 mm KRK-04 6.0

mm

pcs.

38

250

Product code NKRK-08060

KwK screw In wall TIes

50 mm

50 mm L

Product code KWK-4/180 KWK-4/210 KWK-4/235 KWK-4/260

62

Ă˜ Wall tie diameter

L

Cavity spacing

mm 4.0 4.0 4.0 4.0

mm 180 210 235 260

mm 80 110 135 150

mm 40 70 95 110

pcs. 250 250 250 250

mm 8.0

mm 60

pcs. 250


Facade Thermal Insulation Fixings

25 mm

L type wall ties

50 mm L

Product code KL-4/25/250 KL-4/25/275 KL-4/25/300 KL-4/25/340

Ă˜ Wall tie diameter

L

Cavity spacing

mm 4.0 4.0 4.0 4.0

mm 225 250 275 315

mm 100 150 175 215

mm 60 110 135 175

pcs. 250 250 250 250

MULTI Type Wall Ties

L

Product code MULTI 250 MULTI 300 MULTI 320

L

Cavity spacing

mm 250 300 320

mm 100 150 170

mm 60 110 130

pcs. 250 250 250

www.koelner.pl

63


Facade Thermal Insulation Fixings Joint Vents

Retaining Clip

for Cavity Walls

with Draining Nozzle

Product code ISO CLIP

pcs. 250

Setting Tool for KWB Wall Ties

Product code NDK

Product code PW-BIALA PW-SZARA PW-BRAZ

64

mm 60×10×115 60×10×115 60×10×115

Colour white grey brown

pcs. 100 100 100

pcs. 1


gs

in

n

g

fin

o Ro

f o

i i

f

l u

g

f

i

s

o R

f

n

i

o

o

i x i f

n o i t a l

s

t

g

in

s in

gs

in

on

i

at

ul

of

g n

R

u

Ro

g

n

i

f

s

a

l

n

o

i

i

fix

x

i

g

s

g

in of

n

Ro

in

ti

a ul

n

o

n

o

on

s i

i

gs

x

n xi

n

t a

fi

o R

u s n i

g n

a l

l

su

in

i

s g n

io at

fix


Roofing insulation fixings

GOK + fixing with screw

WX, WO, WW, WBT

MateRial telescop: impact resistant copolymer of polypropylene pp or polyamide pa 6.0 (nylon) screw: electro zinc plated

1 the highest quality of the material guaranteeing high impact strength of the product in broad range of temperatures.

2

3

4

5

66

shortened effect of the material aging on the product’s resistance to impact and stresses caused by many long year utilization of the roofing.

the highest anticorrosion protection of screws by using the system of 5 layers of micro thin sealing anti-corrosion coatings.

special design of the thread on the metal sheet screw preventing self unscrewing of the fitting during the roof utilization process.

the Koelner roof system obtains the best results in dynamic and static tests conducted by the most recognized european research and certification institutes.


Roofing Insulation Fixings ApprovalS

GOK Plastic sleeve for fixing insulations layers to flat roofs

Description:

Telescopic connector for fixing insulation layers to flat roofs. Circular plate eliminates the need for positioning the fixing during the installation, this is indispensable when using fixings with oval plate. Could be used with different type of

screws that allow the fixing of the thermal insulation to any kind of substrate: trapezoid sheet, wood, concrete.

MATERIAL:

TYPICAL INSTALLATION: • Concrete • Wood • Trapezoid sheet

Polypropylene Nylon

SUBSTRATE: All type of base material

Polypropylene

Nylon

Polypropylene Product code

Nylon Product code

GOK-015 GOK-035 GOK-065 GOK-075 GOK-085 GOK-095 GOK-105 GOK-125 GOK-135 GOK-165 GOK-185 GOK-225 GOK-255* GOK-285 GOK-325 GOK-385 GOK-425

GOK-015-N GOK-035-N GOK-065-N GOK-075-N GOK-085-N GOK-095-N GOK-105-N GOK-125-N GOK-135-N GOK-165-N GOK-185-N GOK-225-N GOK-255-N* GOK-285-N GOK-325-N GOK-385-N GOK-425-N

* made to order

GOK-PLUS Plastic sleeve

mm 15 35 65 75 85 95 105 125 135 165 185 225 255 285 325 385 425

mm 30 50 80 90 100 110 120 140 150 180 200 240 270 300 340 400 440

pcs. 1100 600 400 300 300 250 250 200 200 150 100 100 100 75 50 50 50

mm 30 50 80 90 100 110 120 140 150 180 200 240 270 300 340 400 440

pcs. 1100 600 400 300 300 250 250 200 200 150 100 100 100 75 50 50 50

ApprovalS

with an additional function of clamping to flat roofs

SUBSTRATE: All type of base material

Product code GOK-PLUS-015-N* GOK-PLUS-035-N GOK-PLUS-065-N GOK-PLUS-075-N* GOK-PLUS-085-N GOK-PLUS-095-N* GOK-PLUS-105-N GOK-PLUS-125-N GOK-PLUS-135-N GOK-PLUS-165-N GOK-PLUS-185-N GOK-PLUS-225-N GOK-PLUS-255-N* GOK-PLUS-285-N* GOK-PLUS-325-N* GOK-PLUS-385-N* GOK-PLUS-425-N*

mm 15 35 65 75 85 95 105 125 135 165 185 225 255 285 325 385 425

* made to order

www.koelner.pl

67


Roofing Insulation Fixings MECHANICAL PROPERTIES Substrate Fixing type Screw diameter Hole diameter in substrate Minimum hole depth Installation depth Minimum substrate thickness Maximum substrate thickness

d d0 h0 hnom hmin hmax

Steel ≥ 0.75mm WO WX 4.8 4.8 N/A N/A N/A N/A N/A N/A 0.75 0.75 0.9 2×1.25

GOK + [mm] [mm] [mm] [mm] [mm] [mm]

WBT 6.1 5 35 30 35 -

Concrete WO+K08 4.8 8 50 40 60 -

Timber WW 5.0 N/A N/A 24 24 -

Plywood WW 5.0 N/A N/A 20 20 -

OSB chipboard WW 5.0 N/A N/A 18 18 -

Timber

Plywood

OSB chipboard

WW 24 1.66 0.83 0.59

WW 20 1.66 0.83 0.59

WW 18 1.52 0.76 0.54

Timber

Plywood

OSB chipboard

WW 24 166 83 59

WW 20 166 83 59

WW 18 152 76 54

Performance data in [Kn] Substrate

Steel ≥ 0.75mm

Fixing type Installation depth Characteristic resistance Design resistance Recommended loads

hnom NRk NRd Nrec

GOK + [mm] [kN] [kN] [kN]

WO ≥0.75 0.97 0.49 0.35

Concrete

WX ≥0.75 0.89 0.45 0.32

WBT 30 1.66 0.83 0.59

WO+K08 40 1.66 0.83 0.59

Performance data in [KG] Substrate

Steel ≥ 0.75mm

Fixing type Installation depth Characteristic resistance Design resistance Recommended loads

hnom NRk NRd Nrec

GOK + [mm] [kg] [kg] [kg]

WO ≥0.75 97 49 35

Concrete

WX ≥0.75 89 45 32

WBT 30 166 83 59

WO+K08 40 166 83 59

ApprovalS

ApprovalS

STEEL WASHERS – FLAT TYPE

STEEL WASHER – DEEP TYPE for thermo insulation

without thermo insulation

Description:

SUBSTRATE: For all type of base material

Circular or oval washers made of steel zinc electroplated or aluminum. SUBSTRATE: For all type of base material

76 82×40 82×40 40 40 40 40

6.0 5.0 6.5 2.5 6.5 6.5 6.5

Ø6,5 Ø7 pcs. 100 100 100 1000 150 1300 850

40

40 40 Ø7 Ø5

Ø6,5

Ø5Ø6,5 POK-06

POK-040-ALZN

* ETA approval

Ø40

Ø40

82

Ø2,5

Ø76

1

1

4

4

Ø76

68

2,5

2,5 1

2,5 1

2,5 2,5

2,5 2,5

1 1

Ø6,5 Ø2,5mm

Ø40

40

ZN ALZN ALZN ALZN ALZN ZN ZN

82 Ø40

Ø2,5

Ø6,5

Ø6,5

82 2,5

POK-06 POW-05-ALZN* POW-07-ALZN* POK-040-ALZN* POK-041-ALZN* POK-041/25 POK-041/50

material

Ø6,5 Ø6,5

Ø76

82 82

2,5

Ø2,5

Ø5 Ø5

82

2,5

Product code

Ø76

1 2,5

1

Ø7 Ø7

Ø40 Ø40

Ø40

2,5 2,5

Ø40

POK-041-ALZN

40

82 82

4

2,5 2,5

82 82

4

POW-07-ALZN 40 40

40 40

POW-05-ALZN

Ø7

Ø7


Roofing Insulation Fixings MECHANICAL PROPERTIES – POW-… Substrate Fixing type Screw diameter Hole diameter in substrate Minimum hole depth Installation depth Minimum substrate thickness Maximum substrate thickness

d d0 h0 hnom hmin hmax

POW + [mm] [mm] [mm] [mm] [mm] [mm]

WO 4.8 N/A N/A N/A 0.75 0.9

Steel ≥ 0.75mm WX WB 4.8 4.8 N/A N/A N/A N/A N/A N/A 0.75 0.75 2×1.25 2×1.25

WBT 6.1 5 35 30 35 -

Concrete WCS 6.3 5 35 30 35 -

WO+K08 4.8 8 50 40 60 -

Timber WW 5.0 N/A N/A 24 24 -

Plywood WW 5.0 N/A N/A 20 20 -

OSB chipboard WW 5.0 N/A N/A 18 18 -

Timber

Plywood

OSB chipboard

WW 24 2.30 1.15 0.82

WW 20 2.12 1.06 0.76

WW 18 1.52 0.76 0.54

Timber

Plywood

OSB chipboard

Performance data in [Kn] – POW-… Substrate Fixing type Installation depth Characteristic resistance Design resistance Recommended loads

Steel ≥ 0.75mm hnom NRk NRd Nrec

POW + [mm] [kN] [kN] [kN]

WO ≥0.75 0.97 0.49 0.35

WX ≥0.75 0.89 0.45 0.32

Concrete WB ≥0.75 0.88 0.44 0.31

WBT 30 4.09 2.05 1.46

WCS 30 4.71 2.36 1.68

WO+K08 40 1.97 0.99 0.70

Performance data in [KG] – POW-… Substrate Fixing type Installation depth Characteristic resistance Design resistance Recommended loads

Steel ≥ 0.75mm hnom NRk NRd Nrec

POW + [mm] [kg] [kg] [kg]

WO ≥0,75 97 49 35

WX ≥0,75 89 45 32

Concrete WB ≥0,75 88 44 31

WBT 30 409 205 146

WCS 30 471 236 168

WO+K08 40 197 99 70

WW 24 230 115 82

WW 20 212 106 76

WW 18 152 76 54

Steel ≥ 0.75mm WX WB 4.8 4.8 N/A N/A N/A N/A N/A N/A 0.75 0.75 2×1.25 2×1.25

WBT 6.1 5 35 30 35 -

Concrete WCS 6.3 5 35 30 35 -

WO+K08 4.8 8 50 40 60 -

Timber WW 5.0 N/A N/A 24 24 -

Plywood WW 5.0 N/A N/A 20 20 -

OSB chipboard WW 5.0 N/A N/A 18 18 -

Timber

Plywood

OSB chipboard

WW 24 2.30 1.15 0.82

WW 20 2.12 1.06 0.76

WW 18 1.52 0.76 0.54

Timber

Plywood

OSB chipboard

WW 24 230 115 82

WW 20 212 106 76

WW 18 152 76 54

MECHANICAL PROPERTIES – POK-… Substrate Fixing type Screw diameter Hole diameter in substrate Minimum hole depth Installation depth Minimum substrate thickness Maximum substrate thickness

d d0 h0 hnom hmin hmax

POK + [mm] [mm] [mm] [mm] [mm] [mm]

WO 4.8 N/A N/A N/A 0.75 0.9

Performance data in [Kn] – POK-… Substrate Fixing type Installation depth Characteristic resistance Design resistance Recommended loads

Steel ≥ 0.75mm hnom NRk NRd Nrec

POK + [mm] [kN] [kN] [kN]

WO ≥0.75 0.97 0.49 0.35

WX ≥0.75 0.89 0.45 0.32

Concrete WB ≥0.75 0.88 0.44 0.31

WBT 30 3.84 1.92 1.37

WB ≥0.75 88 44 31

WBT 30 384 192 137

WCS 30 3.84 1.92 1.37

WO+K08 40 1.97 0.99 0.70

Performance data in [KG] – POK-… Substrate Fixing type Installation depth Characteristic resistance Design resistance Recommended loads

Steel ≥ 0.75mm hnom NRk NRd Nrec

POK + [mm] [kg] [kg] [kg]

WO ≥0.75 97 49 35

WX ≥0.75 89 45 32

Concrete WCS 30 384 192 137

WO+K08 40 197 99 70

www.koelner.pl

69


Roofing insulation fixings approvals

self-taPPing fasteneR

with anti-corrosion coating 15 cycles Kesternich , to the plate max. 0,9 mm

DeScriPtiON:

suBstrate

Screws made of hardened carbon steel protected by a special high quality anti-corrosive coating that guarantees resistance up to 15 Kesternich cycles. Suitable for installing insulation layers on flat roofs together with a appropriate telescopic or steel washer.

SUitABLe FOr USe iN: Trapezoid sheet PH2

PH2 WO-48060 WO-48080 WO-48100 WO-48120 WO-48140 WO-48160 WO-48180 WO-48200 WO-48240 WO-48300

torx-025 WO-48t060* WO-48t080* WO-48t100* WO-48t120* WO-48t140* WO-48t160* WO-48t180* WO-48t200* WO-48t240* WO-48t300*

TORX 025

SPeciFicAtiON DAtA:

Drilling capacity: 2×0.9 mm Thread diameter: 4.8 mm Length: 60-300 mm Bit type: philips-02/torx-025

INSTALLATION WITH GOK

d×L mm

pcs.

pcs.

4.8×60 4.8×80 4.8×100 4.8×120 4.8×140 4.8×160 4.8×180 4.8×200 4.8×240 4.8×300

250 250 200 200 200 100 100 100 100 100

3000 3000 2400 2400 2400 1200 1200 1200 1200 1200

* made to order approvals

self-DRilling fasteneR

with anti-corrosion9,5 coating 159,5cycles Kesternich , to the plate max. 2×1,25 mm

DeScriPtiON: d

L 50-55

L 50-55

suBstrate

d

5

5

9,5 9,5

3,2

Self drilling screws made of hardened carbon steel protected by a special high quality anti-corrosive coating that guarantees resistance up to 15 Kesternich cycles. Suitable for installing insulation layers on flat roofs together with a appropriate telescopic or steel washer.

SUitABLe FOr USe iN: 3,2 Trapezoid sheet

d

Drilling capacity: 2×1.25 mm Thread diameter: 4.8 mm Length: 50-300 mm Bit type: philips-02/torx-025

d

5

L L 50-55 50-55

PH2 TORX 025

SPeciFicAtiON DAtA:

5

3,2 3,2

PH2 WX-48050 WX-48060 WX-48070 WX-48080 WX-48100 WX-48120 WX-48140 WX-48160 WX-48180 WX-48200 WX-48240 WX-48300

* made to order

70

torx-025 WX-48t050* WX-48t060* WX-48t070* WX-48t080* WX-48t100* WX-48t120* WX-48t140* WX-48t160* WX-48t180* WX-48t200* WX-48t240* WX-48t300*

INSTALLATION WITH GOK

d×L mm

pcs.

pcs.

4.8×50 4.8×60 4.8×70 4.8×80 4.8×100 4.8×120 4.8×140 4.8×160 4.8×180 4.8×200 4.8×240 4.8×300

250 250 250 200 200 200 100 100 100 100 100 100

6000 3000 3000 3000 2400 2400 1200 1200 1200 1200 1200 1200


13,5

4

Roofing insulation fixings 5,3

approvals

80-220

self-DRilling fasteneR

with anti-corrosion coating 15 cycles Kesternich

suBstrate

DeScriPtiON:

4,8 4,8

Self drilling screws made of hardened carbon steel protected by a special high quality anti-corrosive coating that guarantees resistance up to 15 Kesternich cycles. Suitable for installing insulation layers on flat roofs in conjunction with steel washer, which remains stable thanks to the double thread.

4

3,2

SUitABLe FOr USe iN:

11 13,5

5,3

Trapezoid sheet

80-220

8,0

SPeciFicAtiON DAtA:

Drilling capacity: 2×1.25 mm Thread diameter: 4.8 mm Total length: 100-220 mm Bottom thread length: 50 mm Bit type: hexagonal 8 mm

4,8

4,8

3,2

APPLIED WITH WASHER POW-05-ALZN 11

INSTALLATION WITH POW-… WASHERS

8,0

Product code WB-48100 WB-48120 WB-48140 WB-48160 WB-48180 WB-48200 WB-48220

4.8×100 4.8×120 4.8×140 4.8×160 4.8×180 4.8×200 4.8×220

mm

mm

pcs.

pcs.

60 80 100 120 140 160 180

80 100 120 140 160 180 200

100 100 100 100 100 100 100

1200 1200 1200 1200 1200 1200 1200 approvals

fasteneR to WooD suBstRates

with anti-corrosion coating 15 cycles Kesternich

suBstrate

DeScriPtiON:

9,5

Screws made of hardened carbon steel with a special thread that provides perfect anchoring in wood. Suitable for fixing of insulation materials in flat roof applications in conjunction with telescopic connector and steel washer. Protected by a special high quality anti-corrosive coating that guarantees resistance up to 15 Kesternich cycles.

OSB PLATE – MIN. THICKNESS 18 MM

L 50-55

PLYWOOD – MIN. THICKNESS 21 MM

TIMBER – MIN. THICKNESS 24 MM

d

SUitABLe FOr USe iN:

Timber, plywood, OSB plate

INSTALLATION WITH GOK

5

SPeciFicAtiON DAtA:

PH2

PH2 WW-5025 WW-5035 WW-5045 WW-5055 WW-5075 WW-5090 WW-5120

torx-025 WW-50t25* WW-50t35* WW-50t45* WW-50t55* WW-50t75* WW-50t90* WW-5t120*

5.0×25 5.0×35 5.0×45 5.0×55 5.0×65 5.0×90 5.0×120

TORX 025

Thread3,2 diameter: 5.0 mm Screw length: 25-120 mm Bit type: philips-02/torx-025

pcs.

pcs.

500 500 250 200 100 100 100

9000 9000 4500 2400 1800 1200 1200

INSTALLATION WITH POK-… WASHERS

* made to order

www.koelner.pl

71


Roofing insulation fixings approvals

self-taPPing fasteneR foR concRete with anti-corrosion coating 15 cycles Kesternich

DeScriPtiON:

suBstrate

TORX 025

Screws made of hardened carbon steel with a double thread that allows the installation of the fixing directly into the concrete. Suitable for fixing insulation materials in flat roof applications in conjunction with telescopic connector and steel washer. Protected by a special high quality anti-corrosive coating that guarantees resistance up to 15 Kesternich cycles or zinc coating of thickness min. 12 microns.

SUitABLe FOr USe iN:

SPeciFicAtiON DAtA:

concrete

Kesternich’s 15 cycles

Zinc plated 12 μm

WBt-61050 WBt-61075 WBt-61090 WBt-61100 WBt-61120 WBt-61140 WBt-61160 WBt-61180 WBt-61200 WBt-61220 WBt-61240 WBt-61260 WBt-61300

WBt-61050-ZN WBt-61075-ZN WBt-61090-ZN WBt-61100-ZN WBt-61120-ZN WBt-61140-ZN WBt-61160-ZN WBt-61180-ZN WBt-61200-ZN WBt-61220-ZN WBt-61240-ZN WBt-61260-ZN WBt-61300-ZN

Thread diameter: 6.1 mm Total screw length: 50-300 mm Bit type: torx-025 Anchorage depth: ≥30 mm Minimum hole depth: 35 mm Recommended drill diameter: 5 mm

INSTALLATION WITH GOK pcs. 6.1×50 6.1×75 6.1×90 6.1×100 6.1×120 6.1×140 6.1×160 6.1×180 6.1×200 6.1×220 6.1×240 6.1×260 6.1×300

pcs. 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200

100 100 100 100 100 100 100 100 100 100 100 100 100

approvals

self-taPPing fasteneR foR concRete with anti-corrosion coating 15 cycles Kesternich

DeScriPtiON:

suBstrate

Screws made of hardened carbon steel, zinc plated, with a special thread that allows anchoring directly into the concrete. Suitable for speedy anchoring of different kind of material in concrete on roofs and facades. Depending on the element to be fixed, can be used in conjunction with sealed EPDM washers or oval steel washer POW-07.

SUitABLe FOr USe iN:

Trapezoid sheet to concrete; metal panels to concrete.

Product code WcS-63028 WcS-63035 WcS-63045 WcS-63080 WcS-63100 WcS-63130 WcS-63150 WcS-63180 WcS-63230

72

SPeciFicAtiON DAtA:

Thread diameter: 6.3 mm Total screw length: 28-230 mm Bit type: philips-02 Anchorage depth: ≥30 mm Minimum hole depth: 40 mm

INSTALLATION WITH POW-07 WASHER mm 6.3×28 6.3×35 6.3×45 6.3×80 6.3×100 6.3×130 6.3×150 6.3×180 6.3×230

pcs. 100 100 100 100 100 100 100 100 100


ROOFING INSULATION FIXINGS APPROVALS

EXPANSION PLUG

SDS ADAPTER

TO THE SELF-TAPPING FASTENER WO

FOR CONE DRILL BIT

SUBSTRATE SUBSTRATE

Product Specification: 1. Compatible screw: WO-4.8… 2. Minimum hole depth: 50 mm

Product code K08L040

mm

pcs.

pcs.

8.0×40

200

4800

Diameter mm 18 18

Product code ADAPTER500 ADAPTER800

Length mm 500 800

WEDGE FACILITATING DRILL DISASSEMBLING Product code DISASSAMBLER

CONE DRILL BIT FOR CONCRETE SUBSTRATE

INSTALLATION ACCESSORIES Product code PH2-100 PH2-150 PH2-200 PH2-250 PH2-350 PH2-460 TORX-025/100 TORX-025/150 TORX-025/200 TORX-025/350 TORX-025/460

PH2 / torx-025 philips-2 philips-2 philips-2 philips-2 philips-2 philips-3

100 150 200 250 350 460

50 100 150 200 300 400

torx-025 torx-025 torx-025 torx-025 torx-025

100 150 200 350 460

50 100 150 300 400

SDS+ DRILLS FOR CONCRETE

G-WB080-0005-0002

G-WB080-0005-0001 G-WB080-0008-0001 Product code G-WB080-0005-0001 G-WB080-0005-0002 G-WB080-0008-0001

Diameter mm 5 5 8

ADAPTER BIT APPLICABLE WITH PH2-025 OR PH2-050 Product code

SUBSTRATE

ADAPTER-BIT-250 ADAPTER-BIT-460 Product code MDT-9504 MDT-9505 MDT-9506 MDT-9507 MDT-9620 MDT-9535 MN-61-131 MN-61-132 MN-61-133 MN-61-134

5.0 5.0 5.0 5.0 5.0 8.0 8.0 8.0 8.0 8.0

110 160 210 310 460 600 110 160 210 260

50 100 150 250 400 540 50 100 150 200

Length mm 110/50 85/25 110/50

Length mm 250 460

POLYTHENE INSULATING FOIL PE SUBSTRATE: ALL TYPE OF BASE MATERIAL

CHARACTERISTICS THICKNESS: 0.2 mm (±5%) WIDTH: 4 m LENGTH: 50 mb AREA PER REEL: 200 m2 AREA PER PALLET: 8000 m2

Product code FOLIA-PE-02/4

www.koelner.pl

73


Fixing selector for appropriate thickness of roofing insulation ** STEEL

0 mm 10 mm 20 mm 30 mm 40 mm 50 mm 60 mm 70 mm 80 mm 90 mm 100 mm 110 mm 120 mm 130 mm 140 mm 150 mm 160 mm 170 mm 180 mm 190 mm 200 mm 210 mm 220 mm 230 mm 240 mm 250 mm 260 mm 270 mm 280 mm 290 mm 300 mm 310 mm 320 mm 330 mm 340 mm 350 mm 360 mm 370 mm 380 mm 390 mm 400 mm 410 mm 420 mm 430 mm 440 mm 450 mm 460 mm 470 mm 480 mm 490 mm 500 mm 510 mm 520 mm 540 mm 560 mm 580 mm 600 mm 620 mm 640 mm 650 mm 660 mm 680 mm 690 mm

74

STEEL

0.7-0.9 mm

0.9-2×1.25 mm

POW-07 + WFS-4225 POW-07 + WFS-4232 POW-05 + WO-48060 G-015 + WO-48060 G-015 + WO-48060 G-035 + WO-48060 G-035 + WO-48060 G-035 + WO-48080 G-065 + WO-48060 G-075 + WO-48060 G-085 + WO-48060 G-095 + WO-48060 G-105 + WO-48060 G-105 + WO-48060 G-125 + WO-48060 G-135 + WO-48060 G-135 + WO-48060 G-135 + WO-48080 G-165 + WO-48060 G-165 + WO-48060 G-185 + WO-48060 G-185 + WO-48060 G-185 + WO-48080 G-185 + WO-48080 G-225 + WO-48060 G-225 + WO-48060 G-225 + WO-48080 G-255 + WO-48060 G-255 + WO-48060 G-255 + WO-48080 G-285 + WO-48060 G-285 + WO-48060 G-285 + WO-48080 G-285 + WO-48080 G-325 + WO-48060 G-325 + WO-48060 G-325 + WO-48080 G-325 + WO-48080 G-325 + WO-48100 G-325 + WO-48120 G-385 + WO-48060 G-385 + WO-48060 G-385 + WO-48080 G-385 + WO-48080 G-425 + WO-48060 G-425 + WO-48060 G-425 + WO-48080 G-425 + WO-48080 G-425 + WO-48100 G-425 + WO-48100 G-425 + WO-48120 G-425 + WO-48120 G-425 + WO-48140 G-425 + WO-48160 G-425 + WO-48160 G-425 + WO-48200 G-425 + WO-48240 G-425 + WO-48240 G-425 + WO-48300 G-425 + WO-48300 G-425 + WO-48300 G-425 + WO-48300 G-425 + WO-48300

POW-07 + WFS-4225 POW-07 + WFS-4232 POW-05 + WX-48050 G-015 + WX-48050 G-015 + WX-48060 G-035 + WX-48050 G-035 + WX-48060 G-035 + WX-48070 G-065 + WX-48050 G-075 + WX-48050 G-085 + WX-48050 G-095 + WX-48050 G-105 + WX-48050 G-105 + WX-48060 G-125 + WX-48050 G-135 + WX-48050 G-135 + WX-48060 G-135 + WX-48070 G-165 + WX-48050 G-165 + WX-48060 G-185 + WX-48050 G-185 + WX-48060 G-185 + WX-48070 G-185 + WX-48080 G-225 + WX-48050 G-225 + WX-48060 G-225 + WX-48070 G-255 + WX-48050 G-255 + WX-48060 G-255 + WX-48070 G-285 + WX-48050 G-285 + WX-48060 G-285 + WX-48070 G-285 + WX-48080 G-325 + WX-48050 G-325 + WX-48060 G-325 + WX-48070 G-325 + WX-48080 G-325 + WX-48100 G-325 + WX-48100 G-385 + WX-48050 G-385 + WX-48060 G-385 + WX-48070 G-385 + WX-48080 G-425 + WX-48050 G-425 + WX-48060 G-425 + WX-48070 G-425 + WX-48080 G-425 + WX-48100 G-425 + WX-48100 G-425 + WX-48120 G-425 + WX-48120 G-425 + WX-48140 G-425 + WX-48160 G-425 + WX-48180 G-425 + WX-48200 G-425 + WX-48240 G-425 + WX-48240 G-425 + WX-48300 G-425 + WX-48300 G-425 + WX-48300 G-425 + WX-48300 G-425 + WX-48300

concrete

concrete

timber

POW-07 + WBT-63050 POW-07 + WBT-63050 POW-07 + WBT-63050 G-015 + WBT-61075 G-015 +WBT-61075 G-015 +WBT-61075 G-035 +WBT-61075 G-035 +WBT-61090 G-035 +WBT-61090 G-065 +WBT-61075 G-075 +WBT-61075 G-085 +WBT-61075 G-095 +WBT-61075 G-105 +WBT-61075 G-105 +WBT-61090 G-125 +WBT-61075 G-135 +WBT-61075 G-135 +WBT-61090 G-135 +WBT-61090 G-165 +WBT-61075 G-165 +WBT-61090 G-185 +WBT-61075 G-185 +WBT-61090 G-185 +WBT-61090 G-185 +WBT-61100 G-225 +WBT-61075 G-225 +WBT-61090 G-225 +WBT-61090 G-255+WBT-61075 G-255+WBT-61090 G-255 +WBT-61090 G-285 +WBT-61075 G-285 +WBT-61090 G-285 +WBT-61090 G-285 +WBT-61100 G-325 +WBT-61075 G-325 +WBT-61090 G-325 +WBT-61090 G-325 +WBT-61100 G-325 +WBT-61120 G-385 +WBT-61075 G-385 +WBT-61075 G-385 +WBT-61090 G-385 +WBT-61090 G-385 +WBT-61100 G-425 +WBT-61075 G-425 +WBT-61090 G-425 +WBT-61090 G-425 +WBT-61100 G-425 +WBT-61120 G-425 +WBT-61120 G-425 +WBT-61140 G-425 +WBT-61140 G-425 +WBT-61160 G-425 +WBT-61180 G-425 +WBT-61200 G-425 +WBT-61220 G-425 +WBT-61240 G-425 +WBT-61260 G-425 +WBT-61300 G-425 +WBT-61300 G-425 +WBT-61300 -

POW-07+WO-48060+K08L040 POW-07+WO-48060+K08L040 G-015+WO-48060+K08L040 G-015+WO-48080+K08L040 G-035+WO-48080+K08L040 G-035+WO-48080+K08L040 G-035+WO-48100+K08L040 G-065+WO-48080+K08L040 G-065+WO-48080+K08L040 G-075+WO-48080+K08L040 G-085+WO-48080+K08L040 G-095+WO-48080+K08L040 G-105+WO-48080+K08L040 G-125+WO-48080+K08L040 G-125+WO-48080+K08L040 G-135+WO-48080+K08L040 G-135+WO-48100+K08L040 G-165+WO-48080+K08L040 G-165+WO-48080+K08L040 G-185+WO-48080+K08L040 G-185+WO-48080+K08L040 G-185+WO-48100+K08L040 G-185+WO-48100+K08L040 G-225+WO-48080+K08L040 G-225+WO-48080+K08L040 G-225+WO-48100+K08L040 G-255+WO-48080+K08L040 G-255+WO-48080+K08L040 G-255+WO-48100+K08L040 G-285+WO-48080+K08L040 G-285+WO-48080+K08L040 G-285+WO-48100+K08L040 G-285+WO-48100+K08L040 G-325+WO-48080+K08L040 G-325+WO-48080+K08L040 G-325+WO-48100+K08L040 G-325+WO-48100+K08L040 G-325+WO-48120+K08L040 G-325+WO-48120+K08L040 G-385+WO-48080+K08L040 G-385+WO-48080+K08L040 G-385+WO-48100+K08L040 G-385+WO-48100+K08L040 G-425+WO-48080+K08L040 G-425+WO-48080+K08L040 G-425+WO-48100+K08L040 G-425+WO-48100+K08L040 G-425+WO-48120+K08L040 G-425+WO-48120+K08L040 G-425+WO-48140+K08L040 G-425+WO-48140+K08L040 G-425+WO-48160+K08L040 G-425+WO-48180+K08L040 G-425+WO-48200+K08L040 G-425+WO-48240+K08L040 G-425+WO-48240+K08L040 G-425+WO-48300+K08L040 G-425+WO-48300+K08L040 G-425+WO-48300+K08L040 G-425+WO-48300+K08L040 -

POW-040 + WW-5525 POW-040 + WW-5535 POW-040 + WW-5545 G-015 + WW-5055 G-015 + WW-5075 G-015 + WW-5075 G-035 + WW-5075 G-035 + WW-5075 G-065 + WW-5055 G-065 + WW-5075 G-075 + WW-5075 G-085 + WW-5075 G-095 + WW-5075 G-105 + WW-5075 G-105 + WW-5075 G-125 + WW-5075 G-135 + WW-5075 G-135 + WW-5075 G-165 + WW-5055 G-165 + WW-5075 G-185 + WW-5055 G-185 + WW-5075 G-185 + WW-5075 G-185 + WW-5090 G-225 + WW-5055 G-225 + WW-5075 G-225 + WW-5075 G-225 + WW-5090 G-255 + WW-5075 G-255 + WW-5075 G-285 + WW-5055 G-285 + WW-5075 G-285 + WW-5075 G-285 + WW-5090 G-325 + WW-5055 G-325 + WW-5075 G-325 + WW-5075 G-325 + WW-5090 G-325 + WW-5090 G-325 + WW-5120 G-385 + WW-5055 G-385 + WW-5075 G-385 + WW-5075 G-385 + WW-5090 G-425 + WW-5055 G-425 + WW-5075 G-425 + WW-5075 G-425 + WW-5090 G-425 + WW-5090 G-425 + WW-5120 G-425 + WW-5120 G-425 + WW-5120 -


d

S

gs

g

in ill

dr lf

Se s g

g

n i

in ill

x i f g n i

f el

l l i r d f l e S

f

d

f

i l l r d f l e S

n

i

dr lf

s

s ng

i

ng

i

ill

g

Se n

i x

g

n

s g

i

n

i

l

i

f

l

e

S

r

i

l

i

x

g

fix

S

e

l

f

d

r

i

l

l

i

n

g

f

i

x

i

n

g

s

S

dr

s

fix

g in

l S

l

l

i

n

g

f

i d

f e

l

i

r

in

fix

e

r


Self Drilling fixingS

„FarMer“ sElf Drilling scrEw

area Of uSe for fixing profiled sheet to wood

prOperTieS maximum drilling capacity in sheet metal: 2,5 mm maximum sheet metal thickness depending on quantity of the layers: – 1 layer up to 2.5 mm, – 2 layers up to 0.9 mm each, – 3 layers up to 0.7 mm each for installation please use screwdriver of load capacity 1600-2000 rpm with regulated torque.

1 colourful polyester protecting coating 45-50 μm thick (ral or ncs).

2

surface-hardened thread (the pivot remains flexible – works together with metal sheet). Protected from corrosion using a layer of zinc 16-20 μm thick.

3 EPDM self-vulcanizing sealing washer. resistance to temperature differences and uv radiation.

4

a reduced small drill bores the metal sheet up to 2.5 mm, it does not decalibrate the hole in wood thus enabling selfthreading of the screw.

PRODUCT MARKING

OD-48028 T 9001

screw type

76

diameter

length

EPDM washer T – zinc plated A – aluminium T14, A14 – Ø14

RAL colour


Self Drilling Fixings ApprovalS

„Farmer” Self Drilling Screws with EPDM Washer DESCRIPTION: for fixing profiled sheet to wood.

FEATURES: • Made according to DIN 7504 K • Reduced drilling point guaranteeing quick and firm installation in wooden substrate • Special under head strengthening protection • Thread for wood with large thread pitch • Available with or without EPDM washer

RAL colour head coating

Product Code OD-48028A OD-48028T OD-48035A OD-48035T OD-48055A OD-48055T

D×L

Lt

mm 4.8×28 4.8×28 4.8×35 4.8×35 4.8×55 4.8×55

mm 22 22 28 28 48 48

Max. drilling thickness mm 2.5 2.5 2.5 2.5 2.5 2.5

Minimum fixing depth in substrate mm 20 20 20 20 20 20

Head size

Material: SCREW: surface hardened carbon steel – zinc electroplated 16µm WASHER FOR SCREWS 4.8: T14 – zinc-plated steel EPDM washer A14 – aluminium EPDM washer HEAD: hexagonal flange head 8 mm

Washer

mm 8 8 8 8 8 8

pcs. 250 250 250 250 100 100

A14 T14 A14 T14 A14 T14

pcs. 4500 4500 3000 3000 1800 1800

MECHANICAL PROPERTIES Connector type

OD-48035 OD-48055

OD-48028

Screw diameter Hole diameter in substrate Installation depth Minimum substrate thickness

d d0 hnom hmin

[mm] [mm] [mm] [mm]

4.8 N/A 20.00 20.00

30.00 30.00

Performance data Sheet metal thickness TENSION LOAD Characteristic resistance Design resistance Recommended loads SHEAR LOAD Characteristic resistance Design resistance Recommended loads

0.40

0.50

0.63

0.75

1.00

NRk NRd Nrec

[kN] [kN] [kN]

1.70 0.60 0.43

VRk VRd Vrec

[kN] [kN] [kN]

1.50 0.55 0.39

1.25

1.50

1.75

Installation

www.koelner.pl

77


Self Drilling Fixings ApprovalS

Self drilling STITCHING screws WITH REDUCED DRILLING POINT TO 2.5 MM – „STAPLES”

DESCRIPTION: overlapping sheet connection.

FEATURES: • Made according to DIN 7504 K • Reduced drilling point guarantees optimum tightness of the fastening • Full thread eliminates overtightening of the screw, allows the screw to be used without a washer if waterproof connection is not needed • Special head design together with washer guarantee even installation and tightness of the connection • Available with or without EPDM washer

RAL colour head coating

Product Code OCW-48016 OCW-48019

D×L

L1

Max. drilling thickness

Head size

mm 4.8×16 4.8×19

mm 13 16

mm 2.5 2.5

mm 8 8

Material: SCREW: surface hardened carbon steel – zinc electroplated 16µm WASHER FOR SCREWS 4.8: T14 – zinc-plated steel EPDM washer A14 – aluminium EPDM washer HEAD: hexagonal flange head 8mm

Washer pcs. 250 250

T14, A14 T14, A14

pcs. 4500 4500

MECHANICAL PROPERTIES Connector type

OCW-…

Screw diameter Hole diameter in substrate Minimum substrate thickness Maximum substrate thickness

d d0 hmin hmax

[mm] [mm] [mm] [mm]

4.8 N/A 0.75 2.00

Performance data Sheet metal thickness TENSION LOAD Characteristic resistance Design resistance Recommended loads SHEAR LOAD Characteristic resistance Design resistance Recommended loads

Installation

78

2×0.40

2×0.50

2×0.63

2×0.75

2×1.00

2×1.25

2×1.50

2×2.00

NRk NRd Nrec

[kN] [kN] [kN]

-

0.60 0.30 0.21

-

-

-

VRk VRd Vrec

[kN] [kN] [kN]

-

1.00 0.40 0.29

-

-

-


Self Drilling fixingS clOSeD-enD waTerprOOf aluminium BlinD riveTS FEATURES: • can be powder painted in all RAl and nCS colours to 40 µm.

MATERIAL: SLEEVE: Al Mg 3.5 MANDREL: steel electro galvanized

D

K

DESCRIPTION: For waterproof fixing of open and closed sections, aluminium retaining elements to substrate, overlapping sheet or sheet metal elements.

ral colour hEaD coating

L

MECHANICAL PROPERTIES Product Code ALF-4008 ALF-4095 ALF-4895 ALF-4812

D×L

K

Drill diameter

mm 4.0×8.0 4.0×9.5 4.8×9.5 4.8×12.5

mm 8.9 8.0 9.5 9.5

mm 4.1 4.1 4.9 4.9

Size pcs. 500 500 500 500

pOwDer painTing

Rivet diameter Hole diameter in substrate Installation depth Minimum substrate thickness

d d0 hnom hmin

[mm] [mm] [mm] [mm]

Ø4.0

Ø4.8

4.00 4.00

4.80 5.00 N/A

-

-

epDm STeel anD aluminium waSHerS

If required all self-drilling screws of OD, OCW, type with or without EPDM washer and rivets can be powder painted in all colours, from RAL and NCS palette.

Product Code

Product Code See project marking

Powder painting in RAl and nCS colours

Steel PET-14 Aluminium PEA-14

mm

mm

pcs.

14

3.5

100

14

3.5

100

www.koelner.pl

79


Self Drilling fixingS

ON sElf Drilling scrEw

area Of uSe fixing of composite panels to thick wall cold formed steel sections

prOperTieS maximum driling capacity: 12.0 mm minimum base material thickness: 3.0 mm installation using the power driver with embedment reducer. additional under head thread of larger pitch prevents form deformation of the upper lining tight waterproof connection

1 fitting profiled metal sheets to steelworks up to 12 mm thick

2 groove discharging shavings appearing during screwing in

3 EPDM self-vulcanizing sealing washer. resistance to temperature differences and uv radiation.

4 powder painting of thickness 40 mm (available in all ral and made to order ncs colours)

80


Self Drilling Fixings ApprovalS

OC type Self Drilling Screws DESCRIPTION: Fixing of sheet metal to steel structures on facades or flat roof construction.

FEATURES: • Under head non threaded zone eliminates thread breakage in sheet metal • Hexagonal flange head • Special head design together with washer guarantees even installation and tightness of the connection • Available with or without EPDM washer.

RAL colour head coating

Product Code

D×L

mm DRILLING CAPACITY UP TO 3 MM OC-48016 4.8×16 OC-48019 4.8×19 OC-48022 4.8×22 OC-48025 4.8×25 OC-48032 4.8×32 OC-48035 4.8×35 OC-48038 4.8×38 OC-48045 4.8×45 OC-48055 4.8×55 DRILLING CAPACITY UP TO 5 MM OC-55022 5.5×22 OC-55025 5.5×25 OC-55032 5.5×32 OC-55038 5.5×38 OC-55045 5.5×45 OC-55055 5.5×55 DRILLING CAPACITY UP TO 6 MM OC-63019 6.3×19 OC-63022 6.3×22 OC-63025 6.3×25 OC-63032 6.3×32 OC-63038 6.3×38 OC-63045 6.3×45 OC-63055 6.3×55 OC-63075 6.3×75 OC-63090 6.3×90 OC-63120 6.3×120 DRILLING CAPACITY UP TO 8 MM OC-55075 5.5×75 OC-55090 5.5×90 OC-55120 5.5×120

mm

Max. drilling thickness mm

13 15 19 22 25 32 35 42 52

3 3 3 3 3 3 3 3 3

8 8 8 8 8 8 8 8 8

16 19 26 32 39 49

5 5 5 5 5 5

12 15 22 28 34 38 58 68 83 113 66 81 111

L1

Head size

Material: SCREW: surface hardened carbon steel – zinc electroplated 16µm WASHER FOR SCREWS 4.8: T14 – zinc electroplated steel EPDM washer A14 – aluminium EPDM washer WASHER FOR SCREWS 5.5: T14, T19 – zinc electroplated steel EPDM washer A14, A19 – aluminium EPDM washer WASHER FOR SCREWS 6.3: T19 – zinc electroplated steel EPDM washer A19 – aluminium EPDM washer HEAD: 8 mm hexagonal flange head (screw 4.8 and 5.5) 10 mm hexagonal flange head (screw 6.3)

Washer

mm

pcs.

pcs.

T14, A14 T14, A14 T14, A14 T14, A14 T14, A14 T14, A14 T14, A14 T14, A14 T14, A14

250 250 250 250 250 250 250 100 100

4500 4500 4500 4500 3000 3000 3000 1800 1800

8 8 8 8 8 8

T14, T19, A14, A19 T14, T19, A14, A19 T14, T19, A14, A19 T14, T19, A14, A19 T14, T19, A14, A19 T14, T19, A14, A19

200 200 100 100 100 100

3600 3600 1800 1800 1800 1800

6 6 6 6 6 6 6 6 6 6

10 10 10 10 10 10 10 10 10 10

T19, A19 T19, A19 T19, A19 T19, A19 T19, A19 T19, A19 T19, A19 T19, A19 T19, A19 T19, A19

200 200 200 200 100 100 100 100 100 100

3600 3600 2400 2400 1800 1800 1800 1800 1800 1800

8 8 8

8 8 8

T14, T19, A14, A19 T14, T19, A14, A19 T14, T19, A14, A19

100 100 100

1200 1200 1200

www.koelner.pl

81


Self Drilling Fixings

MECHANICAL PROPERTIES Size Screw diameter Hole diameter in substrate Minimum substrate thickness Maximum substrate thickness

d d0 hmin hmax

[mm] [mm] [mm] [mm]

Ø4.8

Ø5.5

Ø6.3

4.8

5.5 N/A

6.3

0.75 3.00

1.00 5.00

1.50 8.00

1.00 6.00

Performance data Sheet metal thickness Connector type TENSION LOAD Characteristic resistance Design resistance Recommended loads SHEAR LOAD Characteristic resistance Design resistance Recommended loads Connector type TENSION LOAD Characteristic resistance Design resistance Recommended loads SHEAR LOAD Characteristic resistance Design resistance Recommended loads Connector type TENSION LOAD Characteristic resistance Design resistance Recommended loads SHEAR LOAD Characteristic resistance Design resistance Recommended loads Connector type TENSION LOAD Characteristic resistance Design resistance Recommended loads SHEAR LOAD Characteristic resistance Design resistance Recommended loads

Installation

82

0.50

0.63

0.75

1.00

1.25

1.50

2.00

3.00

-

-

-

-

OC-48… (max drilling thickness 3 mm) NRk NRd Nrec

[kN] [kN] [kN]

0.60 0.30 0.21

-

VRk VRd Vrec

[kN] [kN] [kN]

1.00 0.40 0.29 OC-55… (max drilling thickness 5 mm)

NRk NRd Nrec

[kN] [kN] [kN]

1.20 0.60 0.43

VRk VRd Vrec

[kN] [kN] [kN]

2.30 0.80 0.57 OC-55… (max drilling thickness 8 mm)

NRk NRd Nrec

[kN] [kN] [kN]

2.20 1.20 0.86

VRk VRd Vrec

[kN] [kN] [kN]

2.30 0.80 0.57 OC-63… (max drilling thickness 6 mm)

NRk NRd Nrec

[kN] [kN] [kN]

1.70 0.90 0.64

VRk VRd Vrec

[kN] [kN] [kN]

2.70 0.90 0.64


Self Drilling Fixings ApprovalS

ON type Self Drilling Screws with drilling capacity up to 12 mm DESCRIPTION: • Fixing of sheet metal to steel structures on facades or flat roof construction • Fixings elements of steel construction

RAL colour head coating

Product Code ON-55032 ON-55038

FEATURES: • Hexagonal flange head • Special head design with collar of ONP screw guarantees even installation and tightness of the connection • Available with or without EPDM washer

Material: SCREW: surface hardened carbon steel – zinc electroplated 16µm WASHER FOR SCREWS ON-5.5: T14, T19 – zinc-plated steel EPDM washer A14, A19 – aluminium EPDM washer HEAD: hexagonal flange head 8 mm

ON

ONP with retaining washer head

Max. drilling Head thickness size Washer mm mm mm mm pcs. 5.5×32 15 12 8 T14, T19, A14, A19 100 5.5×38 20 12 8 T14, T19, A14, A19 100 D×L

L1

Product Code

pcs. 1800 1800

ONP-55032 ONP-55038

D×L

L1

mm 5.5×32 5.5×38

mm 15 20

Max. drilling Head size thickness mm mm 12 8 12 8

pcs. 100 100

pcs. 1800 1800

MECHANICAL PROPERTIES ON-55… ONP-55…

Connector type Screw diameter Hole diameter in substrate Minimum substrate thickness Maximum substrate thickness

d d0 hmin hmax

[mm] [mm] [mm] [mm]

5.5 N/A 3.00 12.00

Performance data Sheet metal thickness TENSION LOAD Characteristic resistance Design resistance Recommended loads SHEAR LOAD Characteristic resistance Design resistance Recommended loads

0.50

0.63

0.75

NRk NRd Nrec

[kN] [kN] [kN]

-

-

3.45 1.90 1.36

VRk VRd Vrec

[kN] [kN] [kN]

-

-

2.50 1.40 1.00

1.00

1.25

1.50

2.00

3.00

5.30 2.90 2.07 4.50 2.50 1.79

6.50 2.60 1.36

Installation

www.koelner.pl

83


Self Drilling Fixings ApprovalS

SELF DRILLING SCREWS FOR FIXING COMPOSITE PANELS DESCRIPTION: Fixing the composite panels to cold formed sections structures

FEATURES: • Second threaded zone under hex head prevents steel sheet being pushed up • Hexagonal flange head • Tight waterproof connection • Available with or without EPDM washer

Material: SCREW: surface hardened carbon steel – zinc electroplated 16µm WASHER FOR SCREWS 5.5/6.3: T19 – zinc-plated steel EPDM washer A19 – aluminium EPDM washer HEAD: hexagonal flange head 8mm

RAL colour head coating

D

D1

for the construction made of cold formed structures of thickness up to 6 mm

L1 L

Product Code OC-55/63080 OC-55/63100 OC-55/63120 OC-55/63130 OC-55/63150 OC-55/63160 OC-55/63180 OC-55/63210 OC-55/63230 OC-55/63280

D1/D2×L

L1

mm 6.3/5.5×80 6.3/5.5×100 6.3/5.5×120 6.3/5.5×130 6.3/5.5×150 6.3/5.5×160 6.3/5.5×180 6.3/5.5×210 6.3/5.5×230 6.3/5.5×280

mm 60 80 100 110 130 140 160 190 210 260

Max. drilling thickness mm 6 6 6 6 6 6 6 6 6 6

Drill lenght mm 8 8 8 8 8 8 8 8 8 8

Head size

Maximum build up

mm 8 8 8 8 8 8 8 8 8 8

mm 35-55 55-75 75-95 85-105 105-125 115-135 130-155 145-185 170-205 205-255

Washer T19, A19 T19, A19 T19, A19 T19, A19 T19, A19 T19, A19 T19, A19 T19, A19 T19, A19 T19, A19

pcs. 100 100 100 100 100 100 100 100 100 100

pcs. 500 500 500 500 500 500 500 500 500 500

pcs. 100 100 100 100 100 100 100 100 100

pcs. 500 500 500 500 500 500 500 500 500

D

D1

for the construction made of hot rolled structures of thickness up to 12 mm

L1

L

Product Code ON-55/63080 ON-55/63100 ON-55/63130 ON-55/63150 ON-55/63160 ON-55/63180 ON-55/63210 ON-55/63235 ON-55/63280

84

D1/D2×L

L1

mm 6.3/5.5×80 6.3/5.5×100 6.3/5.5×130 6.3/5.5×150 6.3/5.5×160 6.3/5.5×180 6.3/5.5×210 6.3/5.5×235 6.3/5.5×280

mm 50 70 100 120 130 150 180 200 250

Max. drilling thickness mm 12 12 12 12 12 12 12 12 12

Drill lenght mm 15 15 15 15 15 15 15 15 15

Head size

Maximum build up

mm 8 8 8 8 8 8 8 8 8

mm 25-45 30-65 50-95 70-115 90-125 100-145 140-175 150-200 210-245

Washer T19, A19 T19, A19 T19, A19 T19, A19 T19, A19 T19, A19 T19, A19 T19, A19 T19, A19


Self Drilling Fixings MECHANICAL PROPERTIES – OC-55/63… Connector type Screw diameter Hole diameter in substrate Minimum substrate thickness Maximum substrate thickness

OC-55/63… d d0 hmin hmax

[mm] [mm] [mm] [mm]

5.5 / 6.3 N/A 1.00 5.00

Performance data – OC-55/63… Sheet metal thickness TENSION LOAD Characteristic resistance NRk Design resistance NRd Recommended loads Nrec SHEAR LOAD Characteristic resistance VRk Design resistance VRd Recommended loads Vrec Pulling the screw through steel sheet (without washer) Characteristic resistance VRk Design resistance VRd Recommended loads Vrec

0.50 [kN] [kN] [kN]

0.60

0.70

0.95 0.50 0.36

[kN] [kN] [kN]

0.95 0.50 0.36

1.10 0.60 0.43

1.25 0.70 0.50

[kN] [kN] [kN]

0.80 0.45 0.32

1.10 0.60 0.43

1.20 0.65 0.46

MECHANICAL PROPERTIES – ON-55/63… Connector type Screw diameter Hole diameter in substrate Minimum substrate thickness Maximum substrate thickness

ON-55/63 d d0 hmin hmax

[mm] [mm] [mm] [mm]

5.5 / 6.3 N/A 3.00 12.00

Performance data – ON-55/63… Sheet metal thickness TENSION LOAD Characteristic resistance NRk Design resistance NRd Recommended loads Nrec SHEAR LOAD Characteristic resistance VRk Design resistance VRd Recommended loads Vrec Pulling the screw through steel sheet (without washer) Characteristic resistance VRk Design resistance VRd Recommended loads Vrec

0.50 [kN] [kN] [kN]

0.60

0.70

5.10 2.75 1.96

[kN] [kN] [kN]

0.95 0.50 0.36

1.10 0.60 0.43

1.25 0.70 0.50

[kN] [kN] [kN]

0.80 0.45 0.32

1.10 0.60 0.43

1.20 0.65 0.46

Installation

www.koelner.pl

85


Self Drilling fixingS Zinc plaTeD wafer HeaD ScrewS

Zinc plaTeD wafer HeaD Self Drilling ScrewS with Drilling caPacity uP to 2.5 MM DESCRIPTION: For fixing of thin sheet metal to thin wall structural steel, plastic and building boards

MATERIAL: SCREW: surface hardened carbon steel – zinc electroplated min. 20 μm HEAD: 11 mm diameter with PH2 recess D

MATERIAL: SCREW: surface hardened carbon steel – zinc electroplated min. 20 μm HEAD: 11 mm diameter with PH2 recess D

DESCRIPTION: For fixing of thin sheet metal to thin wall steel structures, plastic and wood

L

L

Product Code WF-4213 WF-4216 WF-4219 WF-4222 WF-4225 WF-4232 WF-4240 WF-4250 WF-4265 WF-4275

D×L mm 4,2×13 4,2×16 4,2×19 4,2×22 4,2×25 4,2×32 4,2×40 4,2×50 4,2×65 4,2×75

pcs. 1000 1000 500 500 500 500 500 500 250 250

D×L

Product Code

pcs. 24000 24000 12000 12000 12000 12000 6000 6000 3000 3000

mm 4,2×13 4,2×16 4,2×19 4,2×22 4,2×25 4,2×32

WFS-4213 WFS-4216 WFS-4219 WFS-4222 WFS-4225 WFS-4232

Max. drilling thickness mm 2,5 2,5 2,5 2,5 2,5 2,5

pcs. 1000 1000 500 500 500 500

pcs. 24000 24000 12000 12000 12000 12000

MECHANICAL PROPERTIES Substrate Screw diameter Hole diameter in substrate Installation depth Minimum substrate thickness Maximum substrate thickness

d d0 hnom hmin hmax

[mm] [mm] [mm] [mm] [mm]

PVC profile

Steel sheet

Timber

4.2

4.2 N/A

4.2

N/A 3.00 N/A

20 40.00 N/A

0.50 2.00

PERfORMANCE dATA PVC profile 3.0 mm

Sheet metal thickness CONNECTOR TYPE TENSION LOAD Characteristic resistance Design resistance Recommended loads CONNECTOR TYPE TENSION LOAD Characteristic resistance Design resistance Recommended loads

INSTALLATION

86

Timber

Steel sheet 0.50 mm

Steel sheet 0.75 mm

Steel sheet 2.00 mm

WF-42… NRk NRd Nrec

[kN] [kN] [kN]

1.25 0.60 0.43

1.35 0.45 0.32

0.80 0.40 0.29 WFS-42…

1.45 0.80 0.57

-

NRk NRd Nrec

[kN] [kN] [kN]

0.80 0.40 0.29

-

-

1.20 0.65 0.46

3.40 1.85 1.32


Self Drilling fixingS epDm STainleSS STeel waSHerS

cOver capS

Product Code KAP-1002 KAP-1003 KAP-1005 KAP-1007 KAP-1013 KAP-1015 KAP-1023 KAP-3000 KAP-3009 KAP-3011 KAP-5010 KAP-5012 KAP-5024 KAP-6002 KAP-6005 KAP-6011 KAP-6020 KAP-6021 KAP-7000 KAP-7024 KAP-7032 KAP-7035 KAP-7040 KAP-8004 KAP-8015 KAP-8017 KAP-9002 KAP-9003 KAP-9005 KAP-9006 KAP-9010 KAP-9011 KAP-1024 KAP-5002 KAP-9007

RAL 1002 1003 1005 1007 1013 1015 1023 3000 3009 3011 5010 5012 5024 6002 6005 6011 6020 6021 7000 7024 7032 7035 7040 8004 8015 8017 9002 9003 9005 9006 9010 9011 1024 5002 9007

Product Code pcs. 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200

Steel PET-14 PET-19 Aluminium PEA-14 PEA-19

mm

mm

pcs.

14 19

3.5 4.0

100 100

14 19

3.5 4.0

100 100

pOwDer painTing If required all self-drilling screws of “Farmer”, OC, ON, ONP type with or without EPDM washer and can be powder painted in all colours, from RAL and NCS palette. Example product marking: Index of screw with washer + symbol of required RAL colour OC-48035T + RAL 8017 = OC-48035T8017

Product Code See project marking

Powder painting in RAl and nCS colours

pipe flaSHingS fOr SHeeT meTal rOOfS Product Code MF-3/C MF-4/C MF-5/C MF-6/C MF-7/C MF-8/C

mm 60-102 76-152 102-178 127-228 152-280 178-330

other sizes available to order

www.koelner.pl

87


Self Drilling Fixings ApprovalS

Stainless Steel Self Driling Screws DESCRIPTION: Overlapping sheet connection.

FEATURES: • Made according to DIN 7504 K • Reduced drilling point guarantees optimum tightness of the fastening • Full thread eliminates overtightening of the screw, allows the screw to be used without a washer if waterproof connection is not needed • Special head design together with washer guarantee even installation and tightness of the connection • Available with or without EPDM washer

with reduced drilling point to 2.5 mm – „Staples”

Material: SCREW: A2 stainless steel WASHER FOR SCREWS 4.8: S14 – A2 stainless steel EPDM washer WASHER FOR SCREWS 5.5: S16, S19 – A2 stainless steel EPDM washer HEAD: hexagonal flange head 8 mm

with drilling capacity up to 3 mm

S

Product Code OCWS-48019

D×L

L1

mm 4.8×19

mm 16

Max. drilling Head size thickness Washer mm mm 2.5 8 S14

S

pcs. 250

Product Code

pcs. 4500

OCWS-55025

D×L

L1

mm 5.5×25

mm 15

Max. drilling Head thickness size mm mm 3 8

Washer S16, S19

pcs. pcs. 200 3600

MECHANICAL PROPERTIES Size

Ø4.8

Screw diameter Hole diameter in substrate Minimum substrate thickness Maximum substrate thickness

d d0 hmin hmax

[mm] [mm] [mm] [mm]

Ø5.5

4.8

5.5 N/A 0.75

2.50

3.00

Performance data Sheet metal thickness Connector type TENSION LOAD Characteristic resistance Design resistance Recommended loads SHEAR LOAD Characteristic resistance Design resistance Recommended loads Connector type TENSION LOAD Characteristic resistance Design resistance Recommended loads SHEAR LOAD Characteristic resistance Design resistance Recommended loads

Installation

88

2×0.40

2×0.50

2×0.63

2×0.75

2×1.00

2×1.25

2×1.50

2×2.00

OCWS-48… + S14 NRk NRd Nrec

[kN] [kN] [kN]

0.35 0.26 0.19

0.45 0.34 0.24

0.62 0.47 0.34

0.81 0.61 0.44

1.29 0.97 0.69

-

-

-

VRk VRd Vrec

[kN] [kN] [kN]

0.57 0.43 0.31

0.88 0.66 0.47

1.34 1.01 0.72

1.61 2.40 1.21 1.80 0.86 1.29 OCWS-55… + S16

-

-

-

NRk NRd Nrec

[kN] [kN] [kN]

-

-

-

-

0.80 0.60 0.43

1.29 0.97 0.69

1.79 1.35 0.96

2.81 2.11 1.51

VRk VRd Vrec

[kN] [kN] [kN]

-

-

-

-

2.11 1.59 1.14

2.42 1.82 1.30

2.83 2.13 1.52

3.72 2.80 2.00


Self Drilling Fixings ApprovalS

Stainless Steel Self Driling Screws with drilling capacity up to 6 mm

DESCRIPTION: Fixing of sheet metal to steel structures on facades or flat roof construction.

FEATURES: • Under head non threaded zone eliminates thread breakage in sheet metal • Hexagonal flange head • Special head design together with washer guarantee even installation and tightness of the connection • Available with or without EPDM washer.

D×L

L1

Max. drilling thickness

mm

mm

mm

5.5×25 5.5×30 5.5×35 5.5×50 5.5×70

16 21 26 41 61

6 6 6 6 6

Product Code OCS-55025 OCS-55030 OCS-55035 OCS-55050 OCS-55070

Material: SCREW: A2 stainless steel WASHER FOR SCREWS 5.5: S16, S19 – A2 stainless steel EPDM washer HEAD: hexagonal flange head 8 mm

Washer S16, S19 S16, S19 S16, S19 S16, S19 S16, S19

pcs.

pcs.

200 100 100 100 100

3600 1800 1800 1800 1800

S

MECHANICAL PROPERTIES Size

Ø5.5

Screw diameter Hole diameter in substrate Minimum substrate thickness Maximum substrate thickness

d d0 hmin hmax

[mm] [mm] [mm] [mm]

5.5 N/A 2.00 6.00

Performance data Sheet metal thickness TENSION LOAD Characteristic resistance Design resistance Recommended loads SHEAR LOAD Characteristic resistance Design resistance Recommended loads

0.50 NRk NRd Nrec

[kN] [kN] [kN]

VRk VRd Vrec

[kN] [kN] [kN]

0.63

0.75

1.00

1.25

1.50

2.00

1.00 0.75 0.54 1.21 0.91 0.65

1.42 1.07 0.76

1.60 1.20 0.86

3.00 -

1.88 1.41 1.01

-

Installation

www.koelner.pl

89


Self Drilling Fixings ApprovalS

Stainless Steel Self Driling Screws with drilling capacity up to 12 mm

DESCRIPTION: • Fixing of sheet metal to steel structures on facades or flat roof construction • Fixings elements of steel construction

FEATURES: • Hexagonal flange head • Available with or without EPDM washer

D×L

L1

Max. drilling thickness

mm

mm

mm

5.5×40

24

12

Product Code ONS-55040

Material: SCREW: A2 stainless steel WASHER: S16, S19 – A2 stainless steel EPDM washer HEAD: hexagonal flange head 8 mm

Washer S16, S19

pcs.

pcs.

100

1800

S

MECHANICAL PROPERTIES Connector type

ONS-55…

Screw diameter Hole diameter in substrate Minimum substrate thickness Maximum substrate thickness

d d0 hmin hmax

[mm] [mm] [mm] [mm]

5.5 N/A 4.00 12.00

Performance data Sheet metal thickness Connector type TENSION LOAD Characteristic resistance Design resistance Recommended loads SHEAR LOAD Characteristic resistance Design resistance Recommended loads Connector type TENSION LOAD Characteristic resistance Design resistance Recommended loads

Installation

90

0.50

0.63

0.75

1.00

1.25

1.50

2.00

3.00

ONS-55… NRk NRd Nrec

[kN] [kN] [kN]

1.40 1.05 0.75

1.81 1.36 0.97

VRk VRd Vrec

[kN] [kN] [kN]

1.38 1.04 0.74

1.85 1.39 0.99

NRk NRd Nrec

[kN] [kN] [kN]

1.67 1.26 0.90

2.32 1.74 1.24

2.09 1.57 1.12 2.18 1.64 1.17

3.22 3.90 2.42 2.93 1.73 2.09 ONS-55… + S16

4.53 3.41 2.44

2.93 2.20 1.57

5.45 4.10 2.93


Self Drilling Fixings ApprovalS

Stainless Steel Self Driling Screws for fixing composite panels

DESCRIPTION: Fixing composite panels to cold forms steel structures

FEATURES: • Second threaded zone under hex head prevents steel sheet being pushed up • Hexagonal flange head • Tight waterproof connection • Available with or without EPDM washer

Material: SCREW: A2 stainless steel WASHER: S16, S19 – A2 stainless steel EPDM washer HEAD: hexagonal flange head 8mm

D1

for the construction made of cold formed structures of thickness up to 6 mm

D2

S L

Product Code

D1/D2×L

Max. drilling thickness

OCS-55/63070 OCS-55/63090 OCS-55/63110 OCS-55/63130 OCS-55/63150 OCS-55/63170 OCS-55/63200 OCS-55/63230

mm 6.3/5.5×70 6.3/5.5×90 6.3/5.5×110 6.3/5.5×130 6.3/5.5×150 6.3/5.5×170 6.3/5.5×200 6.3/5.5×230

mm 35-55 50-75 70-95 80-105 90-125 110-145 140-175 150-210

Washer pcs. 100 100 100 100 100 100 100 100

S16, S19 S16, S19 S16, S19 S16, S19 S16, S19 S16, S19 S16, S19 S16, S19

pcs. 500 500 500 500 500 500 500 500

for the construction made of hot rolled structures of thickness up to 12 mm

S

Product Code

D1/D×L

Max. drilling thickness

ONS-55/63075 ONS-55/63095 ONS-55/63115 ONS-55/63135 ONS-55/63155 ONS-55/63175 ONS-55/63195 ONS-55/63235

mm 6.3 /5.5×75 6.3 /5.5×95 6.3 /5.5×115 6.3 /5.5×135 6.3 /5.5×155 6.3 /5.5×175 6.3 /5.5×195 6.3 /5.5×235

mm 35-55 55-75 80-95 100-125 110-135 125-155 150-175 150-200

MECHANICAL PROPERTIES – OCS-55/63… Connector type Screw diameter Hole diameter in substrate Minimum substrate thickness Maximum substrate thickness

[mm] [mm] [mm] [mm]

pcs. 100 100 100 100 100 100 100 100

S16, S19 S16, S19 S16, S19 S16, S19 S16, S19 S16, S19 S16, S19 S16, S19

pcs. 500 500 500 500 500 500 500 500

MECHANICAL PROPERTIES – ONS-55/63… OC-55/63…

d d0 hmin hmax

Washer

5.5 / 6.3 N/A 2.00 5.00

Connector type Screw diameter Hole diameter in substrate Minimum substrate thickness Maximum substrate thickness

ON-55/63 d d0 hmin hmax

[mm] [mm] [mm] [mm]

www.koelner.pl

5.5 / 6.3 N/A 5.00 12.00

91


Self Drilling Fixings Performance data – OCS-55/63… Sheet metal thickness

Performance data – ONS-55/63…

0.50

0.60

0.70

Sheet metal thickness

TENSION LOAD Characteristic resistance NRk [kN] 2.70 Design resistance NRd [kN] 1.45 [kN] 1.04 Recommended loads Nrec SHEAR LOAD Characteristic resistance VRk [kN] 1.40 1.90 Design resistance VRd [kN] 0.75 1.05 [kN] 0.54 0.75 Recommended loads Vrec Pulling the screw through steel sheet (without washer) [kN] 3.85 5.20 Characteristic resistance VRk Design resistance VRd [kN] 2.10 2.75 Recommended loads Vrec [kN] 1.50 1.96

0.50

0.60

0.70

TENSION LOAD Characteristic resistance NRk [kN] 5.50 Design resistance NRd [kN] 3.00 [kN] 2.14 Recommended loads Nrec SHEAR LOAD Characteristic resistance VRk [kN] 1.40 1.90 Design resistance VRd [kN] 0.75 1.05 [kN] 0.54 0.75 Recommended loads Vrec Pulling the screw through steel sheet (without washer) [kN] 3.85 5.20 Characteristic resistance VRk Design resistance VRd [kN] 2.10 2.75 Recommended loads Vrec [kN] 1.50 1.96

Installation

ApprovalS

Stainless Steel Self Drilling Screws for fixing composite panels and thermal Insulation with reduced drilling point up to 3 mm DESCRIPTION: for fixing profiled sheet to wood.

FEATURES: • Made according to DIN 7504 K, • Reduced drilling point guaranteeing quick and firm installation in wooden substrate, • Thread for wood with large thread pitch. • Available with or without EPDM washer

Material: SCREW: A2 stainless steel WASHER FOR SCREWS 6.5: S16, S19 – A2 stainless steel EPDM washer HEAD: hexagonal flange head 8mm S

Product Code ODWS-65050 ODWS-65065 ODWS-65100 ODWS-65120 ODWS-65140 ODWS-65160

D×L

MECHANICAL PROPERTIES

Max. drilling Minimum fixing thickness depth in substrate Washer

mm 6.5×50 6.5×65 6.5×100 6.5×120 6.5×140 6.5×160

mm 20 20 20 20 20 20

mm 28 43 78 98 118 138

S16, S19 S16, S19 S16, S19 S16, S19 S16, S19 S16, S19

pcs. 100 100 100 100 100 100

Connector type

pcs. 500 500 500 500 500 500

Screw diameter Hole diameter in substrate Installation depth Minimum substrate thickness

ODWS-… d d0 hnom hmin

[mm] [mm] [mm] [mm]

6.5 N/A 25 25.00

50 50.00

Performance data Sheet metal thickness TENSION LOAD Characteristic resistance Design resistance Recommended loads SHEAR LOAD Characteristic resistance Design resistance Recommended loads

92

0.40

0.50

0.63

0.75

NRk NRd Nrec

[kN] [kN] [kN]

1.18 0.89 0.64

1.67 1.26 0.90

2.32 1.74 1.24

2.93 2.20 1.57

VRk VRd Vrec

[kN] [kN] [kN]

1.02 0.77 0.55

1.34 1.01 0.72

1.71 1.29 0.92

2.23 1.68 1.20

1.00

1.25

1.50

1.75

-

-

-

-

4.25 3.20 2.29

3.53 2.65

1.89

-


Self Drilling Fixings SEALING OF TILE SHEETS

Shingle seal

Universal seal Gutter seal

Product Code

Product Code

BALEX USZ-GA/BALEX USZ-RY/BALEX BLACHOTRAPEZ DIAMANT USZ-GA/BLACH-DI USZ-RY/BLACH-DI BLACHOTRAPEZ JOKER USZ-GA/BLACH-JO USZ-RY/BLACH-JO BLACHOTRAPEZ KINGAS USZ-GA/BLACH-KI USZ-RY/BLACH-KI BORGA USZ-GA/BORGA USZ-RY/BORGA BUDMAT SARA USZ-GA/BUD-SAR USZ-RY/BUD-SAR BUDMAT WENUS USZ-GA/BUD-WEN USZ-RY/BUD-WEN BUDMAT ZEFIR USZ-GA/BUD-ZEF USZ-RY/BUD-ZEF FINCO AKCENT USZ-GA/FIN-AKC USZ-RY/FIN-AKC FINCO AKORD USZ-GA/FIN-AKO USZ-RY/FIN-AKO FINCO VEGA USZ-GA/FIN-VEG USZ-RY/FIN-VEG FINCO VIVA USZ-GA/FIN-VIV USZ-RY/FIN-VIV ONDULINE USZ-RY/OND

FINISH PROFILES USZ-GA/FINISH USZ-RY/FINISH FLORIAN FLORA USZ-GA/FLO-FLO USZ-RY/FLO-FLO FLORIAN KINGA USZ-GA/FLO-KIN USZ-RY/FLO-KIN GASELL DIPLOMA USZ-GA/GAS-DIP USZ-RY/GAS-DIP GASELL GRACJA USZ-GA/GAS-GRA USZ-RY/GAS-GRA GASELL KINGA USZ-GA/GAS-KIN USZ-RY/GAS-KIN KOLBIS (QMAC) USZ-GA/QMAC USZ-RY/QMAC LINDAB NISKI PROFIL USZ-GA/LIN-NIS USZ-RY/LIN-NIS LINDAB WYSOKI PROFIL USZ-GA/LIN-WYS USZ-RY/LIN-WYS OLSSON USZ-GA/OLSON USZ-RY/OLSON PLANNJA RAPID USZ-GA/PLA-RAP USZ-RY/PLA-RAP PLANNJA REGENT USZ-GA/PLA-REG USZ-RY/PLA-REG

G R G R G R G R G R G R G R G R G R G R G R G R R

Product Code

G – shingle seal, R – gutter seal, outer packaging 100 pcs.

TRAPEZOIDAL SHEET SEALS

PLANNJA REGOLA USZ-GA/PLA-REL USZ-GA/PLA-REL PLANNJA ROYAL USZ-GA/PLA-ROY USZ-GA/PLA-ROY PRUSZYŃSKI KRON USZ-GA/PRU-KRO USZ-RY/PRU-KRO PRUSZYŃSKI RUBIN USZ-GA/PRU-RUB USZ-RY/PRU-RUB PRUSZYŃSKI SZAFIR USZ-GA/PRU-SZA USZ-GA/PRU-SZA RAUTARUUKKI ELITE USZ-GA/RAU-ELI USZ-GA/RAU-ELI RAUTARUUKKI MAXI NOVA USZ-GA/RAU-NOV USZ-RY/RAU-NOV RAUTARUUKKI MAXI PLUS USZ-GA/RAU-PLU USZ-RY/RAU-PLU TRAFFIC USZ-GA/TRAFIC USZ-RY/TRAFIC ZEPART USZ-GA/ZEPART USZ-RY/ZEPART POLONICA LUNA USZ-GA/POL-LUN USZ-RY/POL-LUN POLONICA ELIOS USZ-GA/POL-ELI USZ-RY/POL-ELI

G R G R G R G R G R G R G R G R G R G R G R G R

G R G R G R G R G R G R G R G R G R G R G R G R

Product Code

Product Code

Product Code

Tile sheets type: T12 USZ-T12-GA G USZ-T12-RY R Tile sheets type: T14 USZ-T14-GA G USZ-T14-RY R Tile sheets type: T15 USZ-T15-GA G USZ-T15-RY R

Tile sheets type: T18 USZ-T18-GA G USZ-T18-RY R Tile sheets type: T20 USZ-T20-GA G USZ-T20-RY R Tile sheets type: T35 USZ-T35-GA G USZ-T35-RY R

Tile sheets type: T45 USZ-T45-GA G USZ-T45-RY R Tile sheets type: T50 USZ-T50-GA G USZ-T50-RY R Tile sheets type: T55 USZ-T55-GA G USZ-T55-RY R Tile sheets type: T60 USZ-T60-GA G USZ-T60-RY R

G – shingle seal, R – gutter seal, outer packaging 100 pcs.

www.koelner.pl

93


Self Drilling Fixings Self-adhesive Universal Seals

TOOLS AND ACCESSORIES Cordless impact screwdriver

triangle cross section

Product Code USZ-KLI-50 USZ-KLI-60

mm 1000×50×30 1000×60×30

pcs. 100 100

Rectangular Universal Seals rectangular cross section

Product Code USZ-UNI-37 USZ-UNI-50 USZ-UNI-60

mm 2000×37×30 2000×50×40 2000×60×40

pcs. 100 100 100

Self-adhesive polyurethane sealing insulation tapes

Product Code Battery Maximum drilling capacity: - metal - wood Nom. load speed Reversing facility Battery charging time

10 mm 20 mm 0-950 U/Min. left/right 3-5 h

supplied in a kit with: • fast battery charger • carrying case

• 2 batteries

additional socket driver with magnet Product Code

ATTENTION 2-8 mm thickness, any width made to order. PACKAGING 25-30 of running meters in a roll

MN-91-015 18 V

MN-16-008 MN-16-010

mm 8 10

mm 45 45

pcs. 1 1

Power Driver Product Code USZ-TAS-085 USZ-TAS-10/2 USZ-TAS-10/3 USZ-TAS-10/4 USZ-TAS-10/5 USZ-TAS-100/4 USZ-TAS-100/5 USZ-TAS-135 USZ-TAS-15/3 USZ-TAS-20/3 USZ-TAS-20/4 USZ-TAS-20/5 USZ-TAS-20/8 USZ-TAS-25/3 USZ-TAS-30/2 USZ-TAS-30/3 USZ-TAS-30/4 USZ-TAS-30/5 USZ-TAS-30/8 USZ-TAS-40/2 USZ-TAS-40/3 USZ-TAS-40/4 USZ-TAS-40/5 USZ-TAS-45/3 USZ-TAS-50/3 USZ-TAS-50/5 USZ-TAS-50/6 USZ-TAS-50/8 USZ-TAS-80/5 USZ-TAS-80/6

94

mm 10×85 2×10 3×10 4×10 5×10 4×100 5×100 10×135 3×15 3×20 4×20 5×20 8×20 3×25 2×30 3×30 4×30 5×30 8×30 2×40 3×40 4×40 5×40 3×45 3×50 5×50 6×50 8×50 5×80 6×80

m 240 200 160 240 180 120 240 160 120 80 90 40 60 30 20 -

SUPPLIED IN A KIT WITH: • DeWalt screwdriver, • carrying case, • screw lead in head.

Product Code AUT-OC/ON

mm Setting tool for installation of composite panels


m

te

t ec

r

Di

t c e

m

r

e t

em

s

t ys

y s

ng

g n

s

fa t c re i D e

t

s a f

t

m

c

e t

e s

r y i

s

D g n i n

i

n te

i n

s

i D

i n e

t s a

f

g

in

n te

s

fa

s sy


Direct fastening system, tools anD accessories rawl patron powDer actUateD tool suBstrAte

R-P-PATRON-MX

R-P-PATRON Product code r-P-PAtroN-MX r-P-PAtroN

pcs. 1 1

with long magazine, 32-72 mm nails single-shot version, 32-72 mm nails

Fixing type

KSc

Krc

Nail diameter [mm]

KSS

KSA

16-22

M6, M8, or M10 to 64

-

-

-

-

3.7

Nail length range [mm] Stripe nails length range [mm]

27-72

19-62

16-72

-

Steel

Min. Base material thickness [mm]

4.5

4

concrete

120

Substrate

accessories

cartriDges

for rAwl PAtroN MX Powder ActuAted tool

SP-SV-11223

SP-SV-11228/SP-SV-11229

SP-SV-11230 SP-SV-11222 SP-SV-11231

SP-SV-11225

Product code SP-SV-11222 SP-SV-11223 SP-SV-11225 SP-SV-11228 SP-SV-11229 SP-SV-11230 SP-SV-11231

96

pcs. damping spring damping piston ring Piston for PAtron Single shot rifle tube for PATron (16-32 mm) Rifle tube with magazine (32-72 mm) for PATron Rifle tube with short magazine (32-72 mm) for PATron Rifle tube with short magazine (16-32 mm) for PATron; available with piston set

1 1 1 1 1 1 1

Product code SP-AM-11/68Y SP-AM-11/68r

yellow red

pcs. 100 100

pcs. 1000 1000


Direct fastening system, tools anD accessories stripe nails

single nails

for coNcrete ANd steel

for steel ANd coNcrete

Product code

Product code

mm

SP-KSc-8/16t SP-KSc-8/19t SP-KSc-8/22t SP-KSc-8/27t SP-KSc-8/32t SP-KSc-8/37t SP-KSc-8/42t SP-KSc-8/47t SP-KSc-8/52t SP-KSc-8/57t SP-KSc-8/62t SP-KSc-8/67t SP-KSc-8/72t

pcs. 500 500 500 500 500 500 500 500 400 300 300 300 300

16 19 22 27 32 37 42 47 52 57 62 67 72

pcs. 6000 6000 6000 6000 6000 6000 6000 6000 4800 3600 3600 3600 3600

single nails with washer 36mm for fIXING MeMBrANes to coNcrete ANd steel suBstrAtes

SP-KdM-8/32 SP-KdM-8/38 SP-KdM-8/51 SP-KdM-8/63

mm 32 38 51 63

pcs. 100 100 100 100

metal strap with nail for coNcrete ANd steel

Product code SP-Ktt-8/27 SP-Ktt-8/32

mm 27 32

pcs. 100 100

ceiling strap „t” type

wItH NAIl ANd flANGe for coNcrete ANd steel

27 32 37 42 47 52 57 62 72

pcs. 500 300 300 300 300 300 300 300 300

pcs. 9000 5400 5400 5400 5400 5400 5400 5400 5400

single nails wItH wAsHer 15 MM for coNcrete ANd steel Product code

mm

SP-Krc-8/19 SP-Krc-8/27 SP-Krc-8/32 SP-Krc-8/37 SP-Krc-8/52 SP-Krc-8/62

19 27 32 37 52 62

pcs. 300 200 200 100 100 100

pcs. 5400 3600 3600 1800 5400 5400

single nails for steel

Product code Product code

mm

SP-KSc-8/27 SP-KSc-8/32 SP-KSc-8/37 SP-KSc-8/42 SP-KSc-8/47 SP-KSc-8/52 SP-KSc-8/57 SP-KSc-8/62 SP-KSc-8/72

SP-KSS-8/16 SP-KSS-8/19 SP-KSS-8/22

mm 16 19 22

pcs. 500 500 500

pcs. 9000 9000 9000

metal clamping ring wItH NAIl for PIPes

Product code SP-Krr-8/27 SP-Krr-8/32 SP-Krr-16/27 SP-Krr-16/32 SP-Krr-20/27 SP-Krr-20/32 SP-Krr-26/27 SP-Krr-26/32

ring diameter mm mm 8 27 8 32 16 27 16 32 20 27 20 32 26 27 26 32

pcs. 100 100 100 100 100 100 100 100

ceiling strap

WITH NAIL WITH METAL FLANGE FOR CONCRETE AND STEEL

Product code SP-KXX-8/27 SP-KXX-8/32

mm 27 32

pcs. 100 100

Product code SP-Kcc-8/27 SP-Kcc-8/32

mm 27 32

pcs. 100 100

www.koelner.pl

97


Direct fastening system, tools anD accessories grease

threaDeD stUD*

for rAwl PAtroN Powder ActuAted tool

Product code

mm

SP-KSA-8/11/12 SP-KSA-8/20/12 SP-KSA-10/20/27 SP-KSA-10/20/15

pcs. 200 100 100 100

23 32 47 35

pcs. 3600 1800 1800 1800

* compatibile with the gun of competitors

threaDeD stUDs*

wItH MetAl ANd steel wAsHers 15 MM

Product code

pcs. 1

r-SV-SMAr

pcs. 6

Product code

mm

SP-KSA-6/11/12 23 SP-KSA-6/20/12 32 SP-KSA-6/20/27 47 SP-KSA-6/20/32 52 SP-KSA-6/32/32 64 * compatibile with the gun of competitors

pcs. 200 200 200 100 300

pcs. 3600 3600 3600 1800 5400

MECHANICAL PROPERTIES Substrate Nail diameter Hole diameter Instalation depth Minimum substrate thickness

concrete c16/20 d d0 hnom hmin

[mm] [mm] [mm] [mm]

30.0

concrete c20/25

concrete c25/30

3.7 N/A 25.0 80.0

20.0

Steel 3.7 N/A 4.0 4.0

PERFORMANCE DATA Substrate

concrete c16/20

Fixture teNSIoN LoAd recommended loads SHeAr LoAd recommended loads

98

concrete c20/25

concrete c25/30 Wood

Nrec

[kN]

0.50

Nrec

[kN]

0.50

steel


Direct fastening system, tools anD accessories corDless gas nailer sc 40

stripe nails for steel with fUel cell

for electrIcAl usAGe ANd GeNerAl INstAllAtIoN suBstrAte

* compatible with PulsA 1000

Product code

mm 6

r-KSc-6/15

mm 15

pcs. 1000 + 1×r-rAWL-GP2

pcs. 12000

stripe nails for concrete with fUel cell * compatible with PulsA 1000

Product code

Product code r-rAWL-Sc40

mm 6 6 6 6

r-KNc-6/20 r-KNc-6/25 r-KNc-6/30 r-KNc-6/40

pcs. 1

mm 20 25 30 40

pcs. 1000 + 1×r-rAWL-GP2 1000 + 1×r-rAWL-GP2 1000 + 1×r-rAWL-GP2 1000 + 1×r-rAWL-GP2

pcs. 12000 12000 12000 12000

MECHANICAL PROPERTIES concrete c16/20

Substrate

rawl fUel cell for cordless GAs NAIler sc40

Nail diameter Hole diameter Instalation depth Min. substrate thickness

d d0 hnom hmin

[mm] [mm] [mm] [mm]

30.0

concrete c20/25 3.7 N/A 25.0 80.0

concrete c25/30

Steel 3.7 N/A 4.0 4.0

20.0

PERFORMANCE DATA Nail type

Product code r-rAWL-GP2

pcs. ~1100 shots/pcs.

100

R-PARTS-2

R-PARTS-3

R-PARTS-4

concrete c16/20

Substrate teNSIoN LoAd recommended loads SHeAr LoAd recommended loads

R-PARTS-1

r-KNc-… concrete c20/25

Nrec

[kN]

0.60

Nrec

[kN]

0.45

r-KSc-… concrete c25/30

www.koelner.pl

Steel 6 mm

Steel 6 mm

0.60

0.80 0.45

99


Direct fastening system, tools anD accessories corDless gas framing nailer ww90ch

nails + fUel cells for framing nailer ww90ch IN cArtoNs

suBstrAte

+ sMootH NAIls Product code r-dPK-2851 r-dPK-2863 r-dPK-2870 r-dPK-2875 r-dPK-3175 r-dPK-3190

mm 2.8 2.8 2.8 2.8 3.1 3.1

mm 51 63 70 75 75 90

pcs. 3300 + 3×r-rAWL-GP1 3300 + 3×r-rAWL-GP1 3300 + 3×r-rAWL-GP1 3300 + 3×r-rAWL-GP1 2200 + 2×r-rAWL-GP1 2200 + 2×r-rAWL-GP1

cartons 90 90 90 90 90 90

mm 51 63 70 75 90

pcs. 3300 + 3×r-rAWL-GP1 3300 + 3×r-rAWL-GP1 3300 + 3×r-rAWL-GP1 2200 + 2×r-rAWL-GP1 2200 + 2×r-rAWL-GP1

cartons 90 90 90 90 90

pcs. 3300 + 3×r-rAWL-GP1 3300 + 3×r-rAWL-GP1 2200 + 2×r-rAWL-GP1 2200 + 2×r-rAWL-GP1

cartons 90 90 90 90

rING sHANK NAIls Product code

Product code r-rAWL-WW90cH

r-drK-2851 r-drK-2863 r-drK-3170 r-drK-3175 r-drK-3190

pcs. 1

mm 2.8 2.8 3.1 3.1 3.1

rING sHANK NAIls GAlvANIZed Product code r-drG-2851 r-drG-2863 r-drG-3175 r-drG-3190

rawl fUel cell

mm 2.8 2.8 3.1 3.1

mm 51 63 75 90

for frAMING NAIler ww90cH MECHANICAL PROPERTIES Nails

Product code r-rAWL-GP1

100

pcs. ~1100 shots/pcs.

100

R-PARTS-1

R-PARTS-2

R-PARTS-3

R-PARTS-4

Nail diameter Hole diameter Instalation depth Minimum substrate thickness

Ø2.8 d d0 hnom hmin

[mm] [mm] [mm] [mm]

Ø3.1

2.8

3.1 N/A

40.0 40.0

40.0 40.0


Direct fastening system, tools anD accessories corDless gas 2nD fiX nailers a2064 & b1664

braDs for 2nD fiX nailers

suBstrAte

Product code

R-RAWL-A2064

R-PARTS-1

R-PARTS-2

R-PARTS-3

Size [mm]

coating

20° angled (gauge 15) BrAdS1532 silver galv. BrAdS1538 silver galv. BrAdS1545 silver galv. BrAdS1550 silver galv. BrAdS1563 silver galv. BrAdS1550SS stainless steel straight (gauge 16) BrAdS1619 silver galv. BrAdS1625 silver galv. BrAdS1632 silver galv. BrAdS1638 silver galv. BrAdS1645 silver galv. BrAdS1650 silver galv. BrAdS1664 silver galv. BrAdS1625SS stainless steel BrAdS1638SS stainless steel BrAdS1650SS stainless steel

pcs.

1.5×32 1.5×38 1.5×45 1.5×50 1.5×63 1.5×50

2000 + 1×r-rAWL-GP4BL 2000 + 1×r-rAWL-GP4BL 2000 + 1×r-rAWL-GP4BL 2000 + 1×r-rAWL-GP4BL 2000 + 1×r-rAWL-GP4BL 2000 + 1×r-rAWL-GP4BL

1.6×19 1.6×25 1.6×32 1.6×38 1.6×45 1.6×50 1.6×64 1.6×25 1.6×38 1.6×50

2000 + 1×r-rAWL-GP4BL 2000 + 1×r-rAWL-GP4BL 2000 + 1×r-rAWL-GP4BL 2000 + 1×r-rAWL-GP4BL 2000 + 1×r-rAWL-GP4BL 2000 + 1×r-rAWL-GP4BL 2000 + 1×r-rAWL-GP4BL 2000 + 1×r-rAWL-GP4BL 2000 + 1×r-rAWL-GP4BL 2000 + 1×r-rAWL-GP4BL

gas for 2nD fiX nailers R-PARTS-4 R-RAWL-B1664 Product code r-rAWL-A2064 r-rAWL-B1664

pcs. 1 1

description

Galv brad sizes [mm]

Angled 15 gauge Straight 16 gauge

32, 38, 45, 50, 63 19, 25, 32, 38, 45, 50, 64

Product code r-rAWL-GP4BL

pcs. 2

metal connector nailer 38 mm suBstrAte

Product code r-rAWL-PMc-38

Shank Weight diameter kg mm 2.5

Nails length mm

Load capacity pcs

38

29

3.3-4.1

operating Pressure 8 bar / 120PSI (recommended 5-7 bars with one unit)

MECHANICAL PROPERTIES Nails

FREE REPLACEMENT OF RINGS INCLUDED

Ø3.8

Nail diameter Hole diameter Instalation depth Minimum substrate thickness

d d0 hnom hmin

[mm] [mm] [mm] [mm]

Product code

description

r-dPcG-3838

34° degree paper tape round head nails 3.8×38mm

www.koelner.pl

3.8 N/A 20.0 20.0

101


Direct fastening system, tools anD accessories inDUstrial pneUmatic framing nailer r-rawl-pnp-130

inDUstrial pneUmatic framing nailer r-rawl-pn-3490

suBstrAte

suBstrAte

FREE REPLACEMENT OF RINGS INCLUDED

FREE REPLACEMENT OF RINGS INCLUDED

Product code

r-rAWL-PNP-130

Nails Shank Weight length diameter kg range mm mm 5,6

3,3-4,2

Load capacity pcs

operating Pressure

50 r-HeAd 8 bar / 120PSI 90-130 plastic collated (recommended 5-7 strip nails bars with one unit)

MECHANICAL PROPERTIES

Product code

r-rAWL-PN-3490

3,8

2,8-4,1

Nails length range mm

Load capacity pcs

operating Pressure

60 d-HeAd 8 bar / 120PSI 50-90 paper collated (recommended 5-7 strip nail bars with one unit)

MECHANICAL PROPERTIES

Nails Nail diameter Hole diameter Instalation depth Minimum substrate thickness

Shank Weight diameter kg mm

d d0 hnom hmin

[mm] [mm] [mm] [mm]

Ø3.8

Nails

3.8 N/A 60.0 60.0

Nail diameter Hole diameter Instalation depth Minimum substrate thickness

nails for framing nailer r-rawl-pnp-130

Ø2.8 d d0 hnom hmin

[mm] [mm] [mm] [mm]

Ø3.1

2.8

3.1 N/A

40.0 40.0

40.0 40.0

nails for framing nailer r-rawl-pn-3490

sMootH NAIls Product code

description

r-GPP-38130 collation type 21° ring shank plastic collected strip nails 3.8×130 mm r-GPG-38120 collation type 21° smooth plastic collected strip nails 3.8×120 mm r-GPG-38130 collation type 21° smooth plastic collected strip nails 3.8×130 mm

Product code

mm 2.9 2.9 2.9 2.9 3.1 3.1

SP-dPK-2950 SP-dPK-2965 SP-dPK-2975 SP-dPK-2985 SP-dPK-3175 SP-dPK-3190

SP-drK-2950 SP-drK-2965 SP-drK-2975 SP-drK-2985 SP-drK-3175 SP-drK-3190

102

mm 2.9 2.9 2.9 2.9 3.1 3.1

pcs. 3300 3300 3300 3300 2200 2200

rING sHANK NAIls GAlvANIZed

rING sHANK NAIls Product code

mm 50 65 75 85 75 90

mm 50 65 75 85 75 90

pcs. 3300 3300 3300 3300 2200 2200

Product code SP-drG-2950 SP-drG-2965 SP-drG-2975 SP-drG-2985 SP-drG-3175 SP-drG-3190

mm 2.9 2.9 2.9 2.9 3.1 3.1

mm 50 65 75 85 75 90

pcs. 3300 3300 3300 3300 2200 2200


Direct fastening system, tools anD accessories coil nailers suBstrAte

R-RAWL-PN-57

Product code r-rAWL-PN-57 r-rAWL-PN-70 r-rAWL-PN-83

R-RAWL-PN-83

R-RAWL-PN-70

Weight kg

Shank diameter mm

Nails length range mm

2,5 3,62 3,72

2,1-2,3 2,5-2,9 2,5-3,3

25-57 45-70 50-83

Load capacity pcs 300-400 (flat) 225-300 (flat) 225-300 (flat)

operating Pressure 8 bar / 120PSI (recommended 5-7 bars with one unit)

MECHANICAL PROPERTIES Nails Nail diameter Hole diameter Instalation depth Minimum substrate thickness

d d0 hnom hmin

[mm] [mm] [mm] [mm]

Ø2.1

Ø2.5

Ø2.8

2.1

2.5 N/A 30.0 30.0

2.8

20.0 20.0

40.0 40.0

nails for coil nailers rING sHANK

Product code

description

r-GdP-2138 r-GdP-2155 r-GdP-2560 r-GdP-2570 r-GdP-2880

Flat wire collated ring shank nails 2.1×38 mm Flat wire collated ring shank nails 2.1×55 mm Flat wire collated ring shank nails 2.5×60 mm Flat wire collated ring shank nails 2.5×70 mm Flat wire collated ring shank nails 2.8×80 mm

www.koelner.pl

103


Direct fastening system, Tools and Accessories oil compressor 25 l tank Product code MAXIMUM POWER TANK SIZE PUMP TYPE AIR DELIVERY NOISE LEVEL OPERATING PRESSURE ELECTRICITY RPM (1/min.)

R-COMP-25L-OIL 2,5 KM 25 L OIL 255L/min 82 dB 10 bar 230V/50HZ 2840

FREE OIL

oil compressor 15 l tank

FREE OIL

Product code MAXIMUM POWER TANK SIZE PUMP TYPE AIR DELIVERY NOISE LEVEL OPERATING PRESSURE ELECTRICITY RPM (1/min.)

oil compressor 12l tank

oilless compressor 10 l tank Product code MAXIMUM POWER TANK SIZE PUMP TYPE AIR DELIVERY NOISE LEVEL Operating Pressure ELECTRICITY RPM

Product code MAXIMUM POWER TANK SIZE PUMP TYPE AIR DELIVERY NOISE LEVEL OPERATING PRESSURE ELECTRICITY RPM (1/min.)

104

R-COMP-12L-OIL 0,5 KM 12 L olejowy 147L/MIN 82 dB 8 bar 230V/50HZ 2840

R-COMP-15L-OIL 2 KM 15 L OIL 216L/min 84 dB 10 bar 230V/50HZ 2840

R-COMP-10L 0,17 KM 10 L OIL LESS 25L/MIN 70 dB 8 bar 230V/50HZ 2840

hose reel 30m PU with roller

FREE OIL

Product code HOSE LENGTH HOSE MATERIAL HOSE I.D. AIR INLET/OUTLET WORKING PRESSURE BURST PRESSURE OUT CASING MATERIAL

R-COMP-HOSEREEL 30 m PU mesh 8×12 mm 21/4” 200 psi 600 psi STEEL


Direct fastening system, Tools and Accessories SPIT Powder Actuated ToolS

SP-P-370-M

SP-P-560

Product code

Product code SPIT

SP-P-560 SP-P-370-M

10500 10530

cartridge discs

pcs. 1 1

for Powder Actuated Tools SPIT SP-P-560

ApprovalS

Nails kbr 4,5 14

14 1,5 19 25

SP-KBR-14P

Product code

Colour Coding

Product code SPIT

SP-AM-16/3 SP-AM-16/4 SP-AM-16/5 SP-AM-16/6 SP-AM-16/7

green – week yellow – medium blue – strong red – very strong black – extra strong

31250 31240 31230 31220 31210

pcs. 100 100 100 100 100

pcs. 1000 1000 1000 1000 1000

cartridge discs for Powder Actuated Tools SPIT SP-P-370-M SP-KBR-09

SP-KBR-14 Product code

SP-KBR-14-S

Product code SPIT

nails in bulk SP-KBR-09 SP-KBR-14 nails for hard steel >600 N/mm2 SP-KBR-14-S collated nails SP-KBR-14P

pcs.

32650 30750

1000 1000

11390

1000

53952

1000

COLOUR CODING:

• 2 (brown) – very weak, • 3 (green) – weak, • 4 (yellow) – medium, • 6 (red) – very strong, Product code

Product code SPIT

SP-AM-10/2 SP-AM-10/3 SP-AM-10/4 SP-AM-10/6

31740 31600 31700 11658

pcs. 100 100 100 100

accessories

accessories

for SPIT P230 Powder Actuated Tool

for SPIT P525L Powder Actuated Tool

SP-SV-311560 SP-SV-311870 Product code

Product code SPIT

SP-SV-311560 SP-SV-311870 SP-SV-311590

311560 311870 311590

SP-SV-311590

Powder actuated tool damper for P230 Piston ring for P230 Piston for P230

SP-SV-328010

pcs. 1 1 1

SP-SV-328050

Product code

Product code SPIT

SP-SV-328010 SP-SV-328050 SP-SV-328300

328010 328050 328300

pcs. 1000 1000 1000 1000

SP-SV-328300

Powder actuated tool damper for P525L Piston ring for P525L Piston for P525L

www.koelner.pl

pcs. 1 1 1

105


Direct fastening system, tools anD accessories c9 nails on strip

sp-maX rebar tying tool

suBstrAte

Product code SP-KNc-9/20t SP-KNc-9/25t SP-KNc-9/30t SP-KNc-9/35t SP-KNc-9/40t SP-KNc-9/50t SP-KNc-9/55t SP-KNc-9/60t

Product code SPIt 11330 11331 11332 11333 11334 11335 11337 11336

mm 20 25 30 35 40 50 55 60

pcs. 500 500 500 500 300 300 300 300

pcs. 1500 1500 1500 1500 1500 1500 1500 1500

sc9 nails on strip

SP-MAX-RB395

Product code

pcs. 1 1

SP-MAX-rB395 SP-MAX-rB655

suBstrAte

charger for sP-MAX reBAr tYING tool

Product code

Product code SPIt

SP-KSc-9/15t SP-KSc-9/20t SP-KSc-9/25t SP-KSc-9/35t SP-KSc-9/40t SP-KSc-9/50t SP-KSc-9/60t

11340 11341 11342 11344 11345 11346 11347

mm 15 20 25 35 40 50 60

pcs. 500 500 500 500 300 300 300

pcs. 1500 1500 1500 1500 1500 1500 1500

Product code

sc6 anD c6 nails on strip

wires

for GAs Powered tools sPIt PulsA 700 e/P

for sP-MAX reBAr tYING tool

STANDARD WIRE TW1525

for steel Product code

Product code SPIt

r-KSc-7/15

46300

mm 15

Product code

Product code SPIt

r-KNc-7/20 r-KNc-7/25 r-KNc-7/30 r-KNc-7/40

46310 46320 46330 46350

STANDARD WIRE TW897

pcs. 1000 + 2×r-rAWL-GP3

for coNcrete

106

pcs. 1

SP-MAX-eY0110

3 wraps knot

mm 20 25 30 40

pcs. 1000 + 2×r-rAWL-GP3 1000 + 2×r-rAWL-GP3 1000 + 2×r-rAWL-GP3 1000 + 2×r-rAWL-GP3

Product code SP-MAX-tW1525* SP-MAX-tW897 *) wire for SP-MAX-RB655

Standard wire Standard wire

pcs. 1 1

pcs. 50 50


s

n

r

a

o h

d

c

e

n

d

a

n o

l a t

m

d

n a

l a t

d e d n

e

o B

s r o h

d e d

c n

n o B a

l a t s

e r

m

o h c

d n a

l

d n a

m

s

r o h

e

c n a

B


High Performance bonded and Metal Anchors DIFFERENT ANCHOR TYPES Koelner offers a wide selection of high performance metal and bonded anchors. Whithin our range we could differentiate the following groups and subgroups: A type: Anchors which are expansion controlled by torque moment (e.g. R-SPL, R-HPT, R-XPT, RBP, RBL). Expansion is achieved by tightening bolt, nut or screw, which forces a cone up into a sleeve.

B type: Expansion anchors fixed by hammering (of a cone) (e.g. R-DCA). Expansion is achieved by hammering in the anchor’s wedge element located in the anchor’s body. Setting is confirmed by the shoulder of the tool reaching the top surface of the anchor body.

Resin Bonded Anchors: Systems of chemical (adhesive) fastening (e.g. R-CAS-V, R-HAC-V, R-KEX, R-KER, RM50, RP30, RV200). The anchor consists of a connecting element (stud or internally threaded socket) and synthetic resin.

A wide range of different types of resin available within our offer, in 3 different types of packaging: • glass capsules – consists of resin and hardener. To install the anchor insert the capsule into the predrilled hole and drive stud or socket into the capsule • cartridges – plastic tubes with two components of resin inside contained in two separate sections of the inner packaging. • CFS+ foils – unique, especially designed packaging for new and innovative resin bonded dispensing system

EXAMPLE OF PROJECT MARKING FOR STUDS R-KEX + R-STUDS 12130

resin type

stud

stud diameter

EXAMPLE OF PROJECT MARKING FOR R-XPT THROUGHBOLT: R-XPT-12125/30

fixture thickness

anchor type

anchor diameter

anchor length

fixture thickness

FACTORS DETERMINING THE PROPER INSTALLATION

For the proper anchor installation various factors have to be taken into consideration such as type of substrate, loads, installation environments. The next step is the appropriate anchor selection. And finally proper anchor installation. Information in this chapter will help you to select an appropriate anchor and provide a proper installation method for required application.

CORROSION

Corrosion is an important factor influencing anchors selection. Two basic corrosion types may be defined: atmospheric and galvanic corrosion. Atmospheric corrosion is caused by the impact of moisture or gases in the air on metal. Galvanic corrosion may occur when two dissimilar metals are in contact with each other. In the presence of an electrolyte (eg water) a galvanic cell is created, causing gradual corrosion of one of the metal elements.

108


High Performance bonded and Metal Anchors The table below shows different combinations of common metals: • the first column of the table includes types of fixed element (fixture) • the top row of the table presents the types of fastening metal (connector) Comments: • Metal of fixed element is not exposed to galvanic corrosion and, in fact, it takes advantage of galvanic protection (low, when the difference of electrochemical potentials is low, higher as the difference of potentials increases). • The galvanic effect is influenced by the size of the field of the two metals’ surface: - if the field of ground material’s surface (steel plate or structure) is smaller, corrosion is accelerated; - if the field of ground material’s surface is bigger, corrosion is slower; The effect is even more prominent if the difference between the two fields is greater. Moreover, the anchors offered by Rawlplug/Koelner are tested in a sea atmosphere on a regular basis. The tests constitute the basis for future products development in cooperation with our customers. All of our metal anchors are zinc electroplated and passivated. In case anchors are intented for use in aggressive atmosphere (coastal, chemical plants, etc.), we recommend hot dip galvanised or stainless steel anchors. Anchor Material Fixture material

Hot dip galvanised steel

Zinc electroplated steel

Zinc alloys

Electro zinc plated steel

Zinc plated steel

Stainless steel

Stainless steel

Lead

Brass

 

Low carbon steel

Aluminium alloys

Zinc alloys

 Contact between these metals is possible

The fixture metal is being attacked The fixed element’s metal is being attacked

CORROSIVITY CLASSIFICATION TABLE Corrosivity Classification

C1 very low C2 low

Weight Loss per Surface Unit/ Thickness Loss (after the first year of use) Low-carbon Steel Zinc Weight Loss Weight Loss Thickness Loss Thickness Loss g/m2 g/m2 μm μm

Typical Environments Exterior

Interior Heated buildings/ neutral atmospheres, ex. offices, shops, schools, hotels.

≤ 10

≤ 1,3

≤ 0,7

≤ 0,1

> 10 to 200

> 1,3 to 25

> 0,7 to 5

> 0,1 to 0,7

Rural areas, low pollution, dry.

Unheated buildings, possible condensation, ex. warehouses, sports halls. Production rooms with high humidity and air pollution, ex. food factories, laundry, breweries, dairies.

C3 medium

> 200 to 400

> 25 to 50

> 5 to 15

> 0,7 to 2,1

Urban and industrial atmospheres. Moderate SO2 pollution, low salinity.

C4 high

> 400 to 650

> 50 to 80

> 15 to 30

> 2,1 to 4,2

Industrial and coastal atmospheres. Moderate salinity.

Chemical processing plants, swimming pools, shipyards.

C5-I very high (industrial)

> 650 to 1500

> 80 to 200

> 30 to 60

> 4,2 to 8,4

Industry with high humidity and aggressive atmosphere.

Permanent condensation and high pollution areas.

C5-M very high (marine)

> 650 to 1500

> 80 to 200

> 30 to 60

> 4,2 to 8,4

Marine coastal, offshore. High salinity.

Permanent condensation and high pollution areas.

www.koelner.pl

109


High Performance bonded and Metal Anchors BASE MATERIAL

Concrete • Compression resistance of concrete: Anchor loads are calculated for the following concrete classes: C20/25, C30/37, C40/50 and C50/60 (in accordance with ENV 206 standard). Two numbers defining the concrete’s class correspond to a characteristic compression resistance of concrete measured for cylindrical shaped samples (dimensions: diameter 150 mm, height 300 mm), and cube (of the 150 mm cube), respectively. Moreover, the classes related to a compression resistance of concrete measured on cylindrical shaped samples (diameter 150 mm, height 300 mm) which is: 25 N/mm2, 35 N/mm2, 45 N/mm2 and 55 N/mm2, respectively, with tolerance ±5 N mm2 (1 N mm2= 1 MPa). In case concrete is of different compression resistance, the closest, lower class defined with a standard, shall be assumed. • Classification of the compression resistance of concrete Poland

Class CE

Characteristic resistance Fck (cylinder)

Characteristic resistance Fck (cube)

PN-B-03264:2002

C12/15 C16/20 C20/25 C25/30 C30/37 C35/45 C40/50 C45/55 C50/60

12 16 20 25 30 35 40 45 50

15 20 25 30 37 45 50 55 60

B15 B20 B25 B30 B37 B45 B50 B55 B60

France Mean resistance, tested cylinder 15×30 cm

Great Britain Mean resistance, tested cube 15×15 cm

Germany Mean resistance, tested cube 20×20 cm

17 21 25 30 35 40 45 50 55

20 25 30 35 42 50 55 60 65

19 24 29 33 40 48 54 57 62

Remark: based on ETAG001 2.4

BASE MATERIAL WITH HOLLOW ELEMENTS (CAVITIES) AND OF LOW STRENGTH We defined design loads, as well as mean destructive load characteristic for load bearing capacity of joints installed in different types of brick grounds, made of both solid and hollow elements. Taking into account a vast range of different types of bricks, blocks and hollow bricks which can be met at construction sites, it is recommended to carry out appropriate tests in order to determine actual allowable loads. (it is recommended to carry out at least 15 individual tensile strength tests).

MATERIAL OF THE ANCHOR

STEEL Durability characteristics of screws and bolts are determined by appropriate mechanical properties classes from 3.6 to 12.9. The definition of mechanical properties of screws consists of two numbers separated with a dot, e.g.: 5.6 First number corresponds to the value of 0.01 Rm of steel of finished screw in MPa. The second number determines the value of 0.1 of Re/Rm percentage ratio. Rm = 500 MPa  |  Re/Rm = 60%  |  Re = 300 MPa The Rm strength of screw or bolt shall not be lower that Re of steel of the fixing elements. The strength classes of nuts are marked 4, 5, 6, 7, 8, 10 & 12 which corresponds with the value of 0.01 of Rm of nut steel in MPa. Nut classes shall correspond to screw or bolt classes; therefore, for class 5.6 screws or bolts, class 5 nuts shall be used.

APPLICATION DIAGRAMS IMPACT OF LOAD DIRECTION: Value Estimation: 100kG – 1kN tensile force

(0° ≤ α ≤ 15°)

force operating at the angle of 30°

(15° < α ≤ 37.5°) 30°

110


High Performance bonded and Metal Anchors force operating at the angle of 45°

(37.5° < α ≤ 52.5°) 45° force operating at the angle of 60°

(52.5° < α ≤ 67.5°) 60° shear force

(67.5° < α ≤ 90°)

ANCHOR LOAD F = √^^^ N2 +V2

a

V = arctan N

N – tension force impacting an anchor (the most heavily loaded anchor in a group), V – shear force impacting an anchor (the most heavily loaded anchor in a group), S – resultant of load forces for individual anchor, a – a deviation angle of a resultant of load forces from the anchor’s axis.

DESIGN LOAD FSd = F 2gF FSd – design value of resultant of load forces,

gF

– partial safety coefficient for the load = 1.4.

THE SPACING AND EDGE DISTANCE OF ANCHORS

As for the amount of tension induced by the expansion of anchored connections and loads, the transfer of which the connections are intended, the following features shall be taken into account while determining technical parameters of load bearing capacity for a particular product: • minimum thickness of base material (determined by an effective depth of fixing hef) • minimum spacing of anchored joints (s) • distance of connections from the edge of the fixture or base material element (c1, c2) and corners (c3).

Overlapping of tension cones of neighbouring connections fixed in concrete lowers the load bearing capacity of such fasteners because of the tension.

• Effective depth of fixing hef For each connection the minimal fixing depth is determined, which ensures safe load bearing. Some types of anchors can be fixed deeper, which increases the load bearing capability (R-SPL, in particular). For more information, please, contact RAWLPLUG/ KOELNER engineering consultant. • Reduced spacing of connections In some cases the anchor spacing and their distance from edges and corners can be reduced. Such a reduction will impact the anchor’s load bearing capacity and, in order to account for the impact, one or more reduction factors will have to be applied.

www.koelner.pl

111


High Performance bonded and Metal Anchors Reduction factors related to the anchor spacing s: fS

Reduction factor related to the distance of anchor from the c1 element’s edge, whereas load is not being transferred towards a free edge: fc1

Reduction factor related to the distance of anchor from the c2 element’s edge, whereas load is being transferred towards a free edge: fc2

c3

c3

In some cases a reduction factor related to the distance of anchor to the plate’s corner c3: fc3 is applied

In case of a group of anchors, it is necessary to consider the connection which is located in the most unfavourable place. tensile

shear

INSTALLATION OF ANCHOR

Installation leaflet is attached to every anchor packaging. Please follow the installation recommendations listed in the leaflet.

BONDED ANCHORS:

1. Drill the hole to the correct diameter and depth for the stud size been used. 2. Clean the hole using brush. 3. Air the hole. 4. Pump the resin into the hole starting from the very bottom till the middle of the hole. 5. Insert stud or socket with the twisting action. Leave the anchor undisturbed until the resin has cured. 6. Attach fixture using the nut and washer. Tighten to the recommended torque.

METAL ANCHORS:

1. Drill the hole of the required diameter and depth. 2. It is recommended to drill the hole of required dimensions during a single action. 3. Remove debris and thoroughly clean the hole with brush and pump. 4. Insert the anchor into the hole and hammer it in if needed. 5. Tighten the anchor to the recommended torque using adjustable torque wrench.

112


High Performance bonded and Metal Anchors TIGHTENING TORQUE

• In case of expanding anchors, it is necessary to apply required tightening torque of values given herein, in order to achieve optimal expansion and load bearing capacities given in tables in the next chapter (we recommend using calibrated torque wrench). Preliminary tension impacts on an anchor’s expansion element (screw or threaded portion). • Moreover, the tightening torque applied will clamp the fixed element to the base material. • The values of tightening torque given in the handbook should not be exceeded. • After preliminary application of tightening torque, a reduction in tension occurs, causing the decrease of applied tightening torque. All data related to a load bearing capacity given in the present handbook account for the above issue.

PERFORMING TRIALS AND TESTS

New types of resin bonded, metal expansion and plastic anchors are developed and tested in our comprehensively equipped research and development laboratories in Glasgow, Scotland and Wroclaw/Lancut, Poland. Before our products are launched into the market, they are subject to a comprehensive program of tests in both our company laboratories and in independent laboratories, in order to establish all technical parameters related to a load bearing capacity. Technical data of our products is also approved by various European Member States and European organisations. BBA (UK), CSTB (France), DIBT (Germany), FM Global (USA), SINTEF (Norway) and ITB (Poland). Finally, it shall be emphasised that the production of our products are subject to the control of the quality assurance system approved by the following bodies: TÜV Rheinland (Poland) AFNOR (France), BSI (UK) and TÜV Rheinland (Germany).

load cell hYdraulic liFt

displaceMent transducer

tested anchor hYdraulic puMp

coMputer x+y 2 F

plotter draWing a curVe „load/MoVeMent” d

www.koelner.pl

113


Bonded Anchors

R-CAS-V spin in capsule

Description R-CAS-V is a high performance resin anchor system for use in safety critical applications. The system relies on the adhesion between the concrete and resin, which is free from expansion forces. This makes it an ideal choice where there are close edge and spacing distances.

1 Anchoring free of expansion stresses

2 Smaller axial and edge distances compared to mechanical anchors.

3 Additional accessories not necessary

4 ideal for solutions where short installation time for chemical fittings is required.

114


bonded ancHors approVals

r-cas-V sPin in caPsUle DESCRIPTION: R-CAS-V is a high performance vinylester resin anchor system for use in safety critical applications. The system relies on the adhesion between the concrete and resin, which is free from expansion forces. This makes it an ideal choice where there are close edge and spacing distances.

pending

FEATURES: • High performance. • Quick and easy to install. • Capsule contains exact amounts of ingredients making it a very consistent product. • Adhesive strength is not affected by unpolluted water (curing time will be affected). • Suitable for overhead applications. • Suitable for use in wet conditions.

MATERIAL: Vinylester Resin. SUITABLE FOR USE IN: Suitable for studs made of galvanized steel, A4 stainless steel, HDG and HCR in concrete. TYPICAL APPLICATION: • Heavy machinery. • Structural steel to concrete.

substrate

R-STUDS

R-STUDS-FL MINIMUM CURING TIME* AND WORkING TIME Base material temperature

Working time

[°C] -5 -0 -5 -10 -15 -20 -30 -40 -* For wet concrete the curing time must be doubled

TECHNICAL DATA

Minimum curing time* [hours] 5 4 2.5 2 90 min. 45 min. 20 min. 10 min.

Product code R-CAS-V-08 R-CAS-V-10 R-CAS-V-12 R-CAS-V-16 R-CAS-V-20 R-CAS-V-24 R-CAS-V-30

d0

M

LC

mm 10 12 14 18 25 28 35

mm M8 M10 M12 M16 M20 M24 M30

mm 85 85 95 95 180 215 270

pcs. 10 10 10 10 6 6 2

INSTALLATION

1. 2. 3. 4. 5. 6.

Drill hole to correct diameter and depth for stud size being used. Clean the hole with brush and hand pump at least four times each. Insert R-CAS-V capsule into the hole. Connect stud to drilling machine using appropriate driver system. Position the stud into the glass capsule then switch on the drilling machine and drive the stud into the capsule. Switch off the drilling machine as soon as the bottom of the hole is reached. Leave the anchor undisturbed until the curing time elapses. Attach fixture and tighten the nut to the required torque.

www.koelner.pl

115


Bonded Anchors

MECHANICAL PROPERTIES Thread size Stud diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Minimum installation depth Minimum substrate thickness Torque

d d0 dfix h0 hnom hmin Tinst

[mm] [mm] [mm] [mm] [mm] [mm] [Nm]

M8

M10

M12

M16

M20

M24

M30

8 10 9 85 80 120 10

10 12 12 95 90 130 20

12 14 14 115 110 140 40

16 18 18 130 125 180 80

20 24 22 175 170 230 120

24 28 26 215 210 270 180

30 35 32 275 270 330 300

Performance data Non-cracked concrete C20/25 Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads for Shear load Characteristic resistance Design resistance Recommended loads for

116

M8

M10

M12

M16

M20

M24

M30

hnom

[mm]

80

90

110

125

170

210

270

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

18.0 12.0 8.6 120 240

30.0 16.7 11.9 135 270

50.0 27.8 19.8 165 330

60.0 33.3 23.8 188 375

95.0 52.8 37.7 255 510

140.0 77.8 55.6 315 630

200.0 111.1 79.4 340 675

VRk VRd Vrec cmin

[kN] [kN] [kN] [mm]

9.0 5.0 3.6 70

14.0 7.8 5.6 89

21.0 11.6 8.3 110

39.2 21.8 15.5 156

61.0 33.9 24.2 190

88.2 49.0 35.0 229

139.9 77.7 55.5 288


Bonded Anchors ApprovalS

R-HAC-V Hammer in capsule DESCRIPTION: R-HAC-V vinylester capsule range is a high performance fixing system that offers a quick and simple method of fixing either threaded studs or rebar into solid concrete. Simply installed by hammering the stud or rebar through the capsule using a hammer or mechanical drill. Not suitable for overhead applications.

pending

FEATURES: • High performance. • Quick and easy to install. • No expensive tooling required for installation. • Long shelf life. • Double capsules can be used for deep embedment. • Ideal for starter bar applications.

Substrate

MATERIAL: Vinylester Resin. SUITABLE FOR USE IN: Suitable for studs made of galvanized steel, A4 stainless steel, HDG, HCR and rebar installation in concrete. TYPICAL APPLICATION: • Starter bar. • Studding

R-STUDS REBAR R-STUDS-FL Minimum curing time* and working time Base material temperature

Working time

Minimum curing time*

[°C]

[minutes]

[hours]

-5 -0 -5 -10 -15 -20 -30 -40 -* For wet concrete the curing time must be doubled

24 14 4 3 90 min 45 min 20 min 10 min

STUDS Installation

Recomended installation: 1. Drill hole to correct diameter and depth for stud size being used. 2. Clean the hole with brush and hand pump at least four times each. 3. Insert R-HAC-V capsule into the hole. The stud is simply hammered through the capsule using a manual hammer (M8-M12) or mechanical hammer (M16-M30). 4. Leave the anchor undisturbed until the curing time elapses. 5. Attach fixture and tighten the nut to the required torque.

Technical data Product code R-HAC-V-08 R-HAC-V-10 R-HAC-V-12 R-HAC-V-16 R-HAC-V-20 R-HAC-V-24 R-HAC-V-30

d0

M

LC

mm 10 12 14 18 25 28 35

mm M8 M10 M12 M16 M20 M24 M30

mm 80 85 95 95 180 210 270

pcs. 10 10 10 10 6 6 2

Rebar Installation

1. Drill appropriate hole for anchor taking care to achieve the exact hole depth. 2. Clean the hole using brush and air four times. 3. Insert capsule(s). 4. The rebar is simply hammered through the capsule using a manual hammer (ø8 - ø12) or mechanical hammer (ø16 - ø32). Leave undisturbed until resin has set. 5. Pour new concrete.

www.koelner.pl

117


Bonded Anchors

MECHANICAL PROPERTIES Thread size Stud diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Minimum installation depth Minimum substrate thickness Torque

d d0 dfix h0 hnom hmin Tinst

[mm] [mm] [mm] [mm] [mm] [mm] [Nm]

M8

M10

M12

M16

M20

M24

M30

8 10 9 85 80 120 10

10 12 12 95 90 130 20

12 14 14 115 110 140 40

16 18 18 130 125 180 80

20 24 22 175 170 230 120

24 28 26 215 210 270 180

30 35 32 275 270 330 300

Performance data Non-cracked concrete C20/25 Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads for Shear load Characteristic resistance Design resistance Recommended loads for

118

M8

M10

M12

M16

M20

M24

M30

hnom

[mm]

80

90

110

125

170

210

270

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

20.0 9.5 6.8 120 240

25.0 11.9 8.5 135 270

40.0 22.2 15.9 165 330

50.0 27.8 19.8 188 375

95.0 52.8 37.7 255 510

115.0 63.9 45.6 315 630

170.0 94.4 67.5 340 675

VRk VRd Vrec cmin

[kN] [kN] [kN] [mm]

9.0 5.0 3.6 70

14.0 7.8 5.6 89

21.0 11.6 8.3 110

39.2 21.8 15.5 156

61.0 33.9 24.2 190

88.2 49.0 35.0 229

139.9 77.7 55.5 288


Bonded Anchors ApprovalS

R-KEX Epoxy Resin DESCRIPTION: R-KEX is a high performance two component epoxy resin system. The epoxy resin is odourless and solvent free, and is ideal for anchoring threaded rod and internally threaded sockets. Substrate

pending

FEATURES: • Solvent free. • Suitable for variable embedment. • Can be used in damp conditions. • High performance especially rebar/starter bar applications. • Product has low shrinkage.

MATERIAL: Two component 100% epoxy resin. SUITABLE FOR USE IN: Suitable for studs made of galvanized steel, A4 stainless steel, HDG and rebar installation in concrete. TYPICAL APPLICATION: • Safety barriers. • Rebar • Temporary works/formwork support systems

SPECIFICATION DATA R-STUDS

R-STUDS-FL

REBAR

Product code R-KEX-400 R-GUN-400-N R-GUN-400-PNEU R-BLOWPUMP SP-CE-ED-1M

R-KEX 400 ml pure epoxy resin with 1 nozzle Professional dispenser gun for 400 ml cartridge Pneumatic dispenser gun for 400 ml cartridge Pump 1 m nozzle extension

Minimum curing time* and working time Base material temperature

STUDS Installation

pcs. 10 1 1 1 10

Working time

Minimum curing time*

[minutes] 5 180 15 60 25 40 35 20 * For wet concrete the curing time must be doubled

[hours] 16 5 4 3

Rebar Installation

1. 2. 3. 4. 5. 6.

Drill hole to the correct diameter and depth for stud size being used. Clean the hole with brush and hand pump at least four times each. Insert cartridge (or foil) into gun and attach nozzle. Dispense to waste until an even colour is obtained. Insert the mixing nozzle to the far end of the hole and inject the resin, slowly withdrawing the nozzle as the hole is filled to 2/3 of its depth. Immediately insert the rod, slowly and with a slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses. Attach fixture and tighten the nut to the required torque.

1. 2. 3. 4. 5.

Drill hole to the correct diameter and depth for rebar size being used. Clean the hole with brush and hand pump at least four times each. Insert cartridge (or foil) into gun and attach nozzle. Dispense to waste until an even colour is obtained. Insert the mixing nozzle to the far end of the hole and inject the resin, slowly withdrawing the nozzle as the hole is filled to 2/3 of its depth. Immediately insert rebar, slowly and with a slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.

www.koelner.pl

119


Bonded Anchors

MECHANICAL PROPERTIES Thread size Stud/rebar diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Minimum installation depth Minimum substrate thickness Torque

d d0 dfix h0 hnom hmin Tinst

[mm] [mm] [mm] [mm] [mm] [mm] [Nm]

M8

M10

M12

M16

M20

M24

M30

8 10 9 85 80 110 10

10 12 12 95 90 120 20

12 14 14 115 110 140 40

16 18 18 130 125 155 80

20 24 22 175 170 210 120

24 28 26 215 210 260 180

30 35 32 275 270 330 300

Performance data Non-cracked concrete C20/25 Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads for Shear load Characteristic resistance Design resistance Recommended loads for

120

M8

M10

M12

M16

M20

M24

M30

hnom

[mm]

80

90

110

125

170

210

270

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

21.5 10.0 7.1 119 237

33.8 15.6 11.2 135 270

52.9 24.5 17.5 165 330

73.4 34.0 24.3 188 375

110.2 51.0 36.4 255 510

136.1 63.0 45.0 298 596

266.8 123.5 88.2 405 810

VRk VRd Vrec cmin

[kN] [kN] [kN] [mm]

9.0 5.0 3.6 70

14.0 7.8 5.6 89

21.0 11.6 8.3 110

39.2 21.8 15.5 156

61.0 33.9 24.2 190

88.2 49.0 35.0 229

139.9 77.7 55.5 288


bonded ancHors approVals

r-Kem+ styrene free Polyester resin DESCRIPTION: R-KEM+ is a high performance, styrene free system that is suitable for use in concrete, and other solid or hollow masonry structures. This makes it ideal for applications where conventional expansion anchors present problems.

pending

FEATURES: • Suitable for solid and hollow substrates. • Suitable for overhead applications (with care). • R-KEM+ fits a standard mastic gun. • Styrene free. • Suitable for use in confined spaces

substrate

pending

MATERIAL: Two component polyester styrene free resin. SUITABLE FOR USE IN: Suitable for studs made of galvanized steel, A4 stainless steel, HDG and HCR in concrete, brickwork, blockwork etc. TYPICAL APPLICATION: • Curtain walling • Balustrading

• Handrails • Canopies

SPECIFICATION DATA Product code R-KEM-175 R-KEM+ 175ml cartridge with 1 nozzle R-KEM-175-C/N R-KEM+ 175ml cartridge with 1 nozzle in display box of 10 R-KEM-300 R-KEM+ 300ml cartridge with 2 nozzles R-KEM-300-C/N-R R-KEM+ 300ml cartridge with 2 nozzles in display box of 10 R-KEM-380* R-KEM+ 380ml cartridge with 2 nozzles R-GUN-300-N Professional dispenser gun for 300 ml cartridge R-GUN-380-PNEU Pneumatic dispenser gun for 380 ml cartridge R-BLOWPUMP Pump R-NOZ-10 Nozzles R-NOZ-100/100 Nozzles * available summer 2011

R-KEM-300-C/N

R-STUDS

R-STUDS-FL

pcs. 10 10 10 10 10 1 1 1 10 100

MINIMUM CURING TIME* AND WORkING TIME

SP-CE

R-PLS

Base material temperature

Working time

Minimum curing time*

[°C]

[minutes]

[min.]

5 30 10 22 20 7 30 3 * For wet concrete the curing time must be doubled

STUDS INSTALLATION IN SOLID SUBSTRATES

200 150 50 25

STUDS INSTALLATION IN HOLLOW SUBSTRATES AND SUBSTRATES WITH VOIDS

1. 3. 4.

Drill hole to the correct diameter and depth for stud or mesh sleeve size being used. 2.1 Solid substrates: Clean the hole with brush and hand pump at least four times each. 2.2 Hollow substrates: Insert mesh sleeve into the hole. Insert cartridge (or foil) into gun and attach nozzle. Dispense to waste until an even colour is obtained. Insert the mixing nozzle to the far end of the hole and inject the resin, slowly withdrawing the nozzle as the hole is filled to:

5. 6.

4.1 Solid substrates: 2/3 of its depth 4.2 Hollow substrates: full mesh. Immediately insert the rod, slowly and with a slight twisting motion. Remove excess of resin around the hole before it sets and leave it undisturbed until the curing time elapses. Attach fixture and tighten the nut to the required torque.

www.koelner.pl

121


Bonded Anchors

MECHANICAL PROPERTIES Solid substrates Thread size Stud diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Minimum installation depth Minimum substrate thickness Torque

d d0 dfix h0 hnom hmin Tinst

[mm] [mm] [mm] [mm] [mm] [mm] [Nm]

Hollow substrates & substrates with voids

M8

M10

M12

M8

M8

M10

M10

M12

8 10 9 85 80 120 10

10 12 12 95 90 130 20

12 14 14 115 110 160 40

8 16 9 90 85 120 10

8 16 9 130 125 250 10

10 16 12 90 85 120 20

10 16 12 130 125 250 20

12 22 14 90 85 120 40

Performance data â&#x20AC;&#x201C; Solid substrates Solid brick Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads for

Aerated concrete

M8

M10

M12

M8

M10

M12

hnom

[mm]

80

90

110

80

90

110

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

8.7 2.9 2.1 40 40

12.1 4.0 2.9 45 45

20.0 6.7 4.8 55 55

2.2 0.7 0.5 40 40

3.1 1.0 0.7 45 45

4.1 1.4 1.0 55 55

Performance data â&#x20AC;&#x201C; Hollow substrates & substrates with voids Hollow brick Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads for

122

Light hollow concrete

M8

M8

M10

M10

M12

M8

M8

M10

M10

M12

hnom

[mm]

85

125

85

125

85

85

125

85

125

85

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

5.6 1.9 1.4

7.0 2.3 1.6

7.0 2.3 1.6 100 200

7.6 2.5 1.8

7.0 2.3 1.6

3.0 1.0 0.7

4.3 1.4 1.0

4.1 1.4 1.0 100 200

4.7 1.6 1.1

4.1 1.4 1.0


bonded ancHors approVals

r-Ker Vinylester resin DESCRIPTION: High performance vinylester resin R-KER/RKER-W is suitable for use in concrete. This makes it ideal for applications where conventional expansion anchor present problem. Can be installed in wet concrete and flooded holes. Special winter formula down to -20°C.

For studs

pending – eta For rebar 2011

pending

FEATURES: • Suitable for any size studs. • Hight load capacity.

SUITABLE FOR USE IN: Suitable for studs made of galvanized steel, A4 stainless steel, HDG and HCR in concrete.

MATERIAL: Two component styrene free vinylester resin.

TYPICAL APPLICATION: • Curtain walling. • Balustrading • Handrails • Canopies • Rebar • Base plate • Steel angle

substrate

SPECIFICATION DATA Product code

R-STUDS

R-KER 300 ml vinylester resin with 2 nozzles R-KER 345 ml vinylester resin with 2 nozzles R-KER 380 ml vinylester resin with 2 nozzles

R-KER-380-W

R-KER 380 ml vinylester resin winter formula with 2 nozzles

10

Professional dispenser gun for 300 ml cartridge Professional dispenser gun for 345 ml cartridge Professional dispenser gun for 380 ml cartridge Pneumatic dispenser gun for 380 ml cartridge Pump Nozzles Nozzles

1 1 1 1 1 10 100

R-GUN-300-N R-GUN-345-N R-GUN-380-N R-GUN-380-PNEU R-BLOWPUMP R-NOZ-10 R-NOZ-100/100

R-STUDS-FL

REBAR

pcs. 10 10 10

R-KER-300 R-KER-345 R-KER-380

MINIMUM CURING TIME* AND WORkING TIME Base material temperature [°C] -20 -15 -10 -5 0 5 10 15 20 30 40

Working time R-KER

Minimum curing time* R-KER-W

R-KER

[minutes] — — — 60 40 20 12 8 5 2 0.5

R-KER-W [hours]

100 60 30 16 12 8 5 3 2 — —

— — — 6 3 2 80 min 60 min 45 min 20 min 10 min

24 16 8 4 2 1 45 min 30 min 10 min — —

* For wet concrete the curing time must be doubled

www.koelner.pl

123


Bonded Anchors

MECHANICAL PROPERTIES Thread size Stud diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Minimum installation depth Minimum substrate thickness Torque

d d0 dfix h0 hnom hmin Tinst

[mm] [mm] [mm] [mm] [mm] [mm] [Nm]

M8

M10

M12

M16

M20

M24

M30

8 10 9 85 80 110 10

10 12 12 95 90 120 20

12 14 14 115 110 140 40

16 18 18 130 125 155 80

20 24 22 175 170 210 120

24 28 26 215 210 260 180

30 35 32 275 270 330 300

Performance data Non-cracked concrete C20/25 Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads for Shear load Characteristic resistance Design resistance Recommended loads for

M8

M10

M12

M16

M20

M24

M30

hnom

[mm]

80

90

110

125

170

210

270

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

18.0 12.0 8.6 120 240

29.0 19.3 13.8 135 270

42.0 28.0 20.0 165 330

69.1 38.4 27.4 188 375

101.5 56.4 40.3 255 510

142.5 67.9 48.5 307 613

178.1 84.8 60.6 338 676

VRk VRd Vrec cmin

[kN] [kN] [kN] [mm]

9.0 5.0 3.6 70

14.0 7.8 5.6 89

21.0 11.6 8.3 110

39.2 21.8 15.5 156

61.0 33.9 24.2 190

88.2 49.0 35.0 229

139.9 77.7 55.5 288

STUDS Installation Rebar Installation

1. 2. 3. 4. 5. 6.

124

Drill hole to the correct diameter and depth for stud size being used. Clean the hole with brush and hand pump at least four times each. Insert cartridge (or foil) into gun and attach nozzle. Dispense to waste until an even colour is obtained. Insert the mixing nozzle to the far end of the hole and inject the resin, slowly withdrawing the nozzle as the hole is filled to 2/3 of its depth. Immediately insert the rod, slowly and with a slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses. Attach fixture and tighten the nut to the required torque.

1. 2. 3. 4. 5.

Drill hole to the correct diameter and depth for rebar size being used. Clean the hole with brush and hand pump at least four times each. Insert cartridge (or foil) into gun and attach nozzle. Dispense to waste until an even colour is obtained. Insert the mixing nozzle to the far end of the hole and inject the resin, slowly withdrawing the nozzle as the hole is filled to 2/3 of its depth. Immediately insert rebar, slowly and with a slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.


Bonded Anchors ApprovalS

R-KF2 Polyester resin Description: Polyester resin based bonded anchor with styrene is dedicated for connections with medium load capacity. R-KF2 bonded anchors are designed for fixings in reinforced or plain and uncracked concrete class not lower than C20/25. MATERIAL: Polyester resin Suitable for use in: Suitable for studs made of galvanized steel, A4 stainless steel, HDG and HCR.

pending

FEATURES: • Fixings of structural elements with medium load capacity in uncracked concrete bases. • Fixings requiring insulation properties (e.g. cables, lighting). • High water resistance. Possibility of fixing in wet base and in openings filled with water. • Broad range of lengths and diameters of fitted bars. • Small distances of anchor from the base edge and between anchors.

pending

Typical application: • Balustrading • Handrails • Canopies • Masonry support

Substrate

SPECIFICATION DATA Product code R-KF2-380 R-GUN-380-N R-GUN-380-PNEU R-BLOWPUMP R-NOZ-10 R-NOZ-100/100 SP-CE-ED-1M

R-STUDS

pcs. 10 1 1 1 10 100 10

Minimum curing time* and working time

R-STUDS-FL

Installation

R-KF2 polyester resin 380 ml cartridge with 1 nozzle Professional dispenser gun for 380 ml cartridge Pneumatic dispenser gun for 380 ml cartridge Pump Nozzles Nozzles 1 m nozzle extension

Concrete temperature

Working time

Minimum curing time*

[°C]

[minutes]

[hours]

-5 0 5 10 15 20 30

60 40 20 12 8 5 2

6 3 2 80 min 60 min 45 min 20 min

* For wet concrete the curing time must be doubled

1. 2. 3. 4. 5. 6.

Drill hole to the correct diameter and depth for stud size being used. Clean the hole with brush and hand pump at least four times each. Insert cartridge (or foil) into gun and attach nozzle. Dispense to waste until an even colour is obtained. Insert the mixing nozzle to the far end of the hole and inject the resin, slowly withdrawing the nozzle as the hole is filled to 2/3 of its depth. Immediately insert the rod, slowly and with a slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses. Attach fixture and tighten the nut to the required torque.

www.koelner.pl

125


Bonded Anchors

MECHANICAL PROPERTIES Thread size Stud diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Minimum installation depth Minimum substrate thickness Torque

d d0 dfix h0 hnom hmin Tinst

[mm] [mm] [mm] [mm] [mm] [mm] [Nm]

M8

M10

M12

M16

M20

M24

M30

8 10 9 85 80 110 10

10 12 12 95 90 120 20

12 14 14 115 110 140 40

16 18 18 130 125 155 80

20 24 22 175 170 210 120

24 28 26 215 210 260 180

30 35 32 275 270 330 300

Performance data Non-cracked concrete C20/25 Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads for Shear load Characteristic resistance Design resistance Recommended loads for

126

M8

M10

M12

M16

M20

M24

M30

hnom

[mm]

80

90

110

125

170

210

270

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

19.1 10.6 7.6 113 225

28.3 15.7 11.2 135 270

39.4 21.9 15.6 158 315

56.5 31.4 22.4 188 375

90.8 50.4 36.0 255 510

110.8 52.8 37.7 271 541

127.2 60.6 43.3 286 571

VRk VRd Vrec cmin

[kN] [kN] [kN] [mm]

9.0 5.0 3.6 70

14.0 7.8 5.6 89

21.0 11.6 8.3 110

39.2 21.8 15.5 156

61.0 33.9 24.2 190

88.2 49.0 35.0 229

139.9 77.7 55.5 288


cartridge free disPensing system DESCRIPTION RAWL CFS+ is an innovative new bonded resin dispensing system. The CFS+ is entirely cartridge free and it is easy to set up using a unique foil refill which is fast and easy to use saving time on projects. The CFS+ uses 3 types of resin: • RV200 vinylester styrene free resin • RM50 styrene free polyester resin, • RP30 polyester resin. It is easy to use and requires no cutting or trimming of the foil.

RV200 VINYLESTER STYRENE FREE RESIN 300 ML / 600 ML approVals

pending

RP30 POLYESTER RESIN 300 ML / 600 ML

Product code R-CFS+-RV200-4 R-CFS+-RV200-600-10* winter formula R-CFS+-RV200W-4 R-CFS+-RV200W-600-10** * available summer 2011 ** made to order

approVals

Product code pending

R-CFS+-RP30-4 R-CFS+-RP30-600-10*

Foil volume

Quantity

ml 300 600

Foil 4 10

Nozzle 4 10

300 600

4 10

4 10

Foil volume ml 300 600

Quantity Foil 4 10

Nozzle 4 10

* available summer 2011 pending

RM50 POLYESTER STYRENE FREE RESIN 300 ML / 600 ML approVals

pending

pending

Product code R-CFS+-RP30-4 R-CFS+-RP30-600-10* * available summer 2011

Foil volume ml 300 600

Quantity Foil 4 10

Nozzle 4 10

TYPICAL APPLICATIONS

www.koelner.pl

127


cartridge free disPensing system approVals

rV200 Vinylester styrene free resin DESCRIPTION: High performance epoxy acrylate resin + RV200/ RV200-W is suitable for use in concrete. This makes it ideal for applications where conventional expansion anchor present problem. Can be installed in wet concrete and flooded holes. Special winter formula down to -20°C. FEATURES: • Suitable for any size studs. • High load capacity.

pending – eta For rebar 2011

MATERIAL: Two component styrene free vinylester resin. SUITABLE FOR USE IN: Suitable for studs made of galvanized steel, A4 stainless steel, HDG and HCR in concrete.

cfs+ noZZle

adaPter

TYPICAL APPLICATION: • Curtain walling • Balustrading • Handrails • Canopies

pending

• Rebar • Base plate • Steel angle

cfs+ disPenser gUn

substrate

Product code R-NOZ-10 R-NOZ-100/100

Product code

pcs. 10 100

R-CFS+-GUN R-CFS+-GUN-PNEU

300 ml 300, 600 ml

MINIMUM CURING TIME* AND WORkING TIME Base material temperature

R-STUDS

SPECIFICATION DATA

R-STUDS-FL

Product code R-CFS+-RV200-4 R-CFS+-RV200-600-10* winter formula R-CFS+-RV200W-4 R-CFS+-RV200W-600-10** * available summer 2011 ** made to order

Foil volume

Quantity

ml 300 600

Foil 4 10

Nozzle 4 10

300 600

4 10

4 10

STUDS INSTALLATION

1. 2. 3. 4. 5. 6.

128

Drill hole to the correct diameter and depth for stud size being used. Clean the hole with brush and hand pump at least four times each. Insert cartridge (or foil) into gun and attach nozzle. Dispense to waste until an even colour is obtained. Insert the mixing nozzle to the far end of the hole and inject the resin, slowly withdrawing the nozzle as the hole is filled to 2/3 of its depth. Immediately insert the rod, slowly and with a slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses. Attach fixture and tighten the nut to the required torque.

Working time

R-KER R-KER-W [°C] [minutes] -20 — 100 -15 — 60 -10 — 30 -5 60 16 0 40 12 5 20 8 10 12 5 15 8 3 20 5 2 30 2 — 40 0.5 — * For wet concrete the curing time must be doubled

Minimum curing time* R-KER R-KER-W [hours] — 24 — 16 — 8 6 4 3 2 2 1 80 min 45 min 60 min 30 min 45 min 10 min 20 min — 10 min —

REBAR INSTALLATION

1. 2. 3. 4. 5.

Drill hole to the correct diameter and depth for rebar size being used. Clean the hole with brush and hand pump at least four times each. Insert cartridge (or foil) into gun and attach nozzle. Dispense to waste until an even colour is obtained. Insert the mixing nozzle to the far end of the hole and inject the resin, slowly withdrawing the nozzle as the hole is filled to 2/3 of its depth. Immediately insert rebar, slowly and with a slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.


cartridge free dispensing system

MECHANICAL PROPERTIES Thread size Stud diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Minimum installation depth Minimum substrate thickness Torque

d d0 dfix h0 hnom hmin Tinst

[mm] [mm] [mm] [mm] [mm] [mm] [Nm]

M8

M10

M12

M16

M20

M24

M30

8 10 9 85 80 110 10

10 12 12 95 90 120 20

12 14 14 115 110 140 40

16 18 18 130 125 155 80

20 24 22 175 170 210 120

24 28 26 215 210 260 180

30 35 32 275 270 330 300

Performance data Non-cracked concrete C20/25 Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads for Shear load Characteristic resistance Design resistance Recommended loads for

M8

M10

M12

M16

M20

M24

M30

hnom

[mm]

80

90

110

125

170

210

270

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

18.0 12.0 8.6 120 240

29.0 19.3 13.8 135 270

42.0 28.0 20.0 165 330

69.1 38.4 27.4 188 375

101.5 56.4 40.3 255 510

142.5 67.9 48.5 307 613

178.1 84.8 60.6 338 676

VRk VRd Vrec cmin

[kN] [kN] [kN] [mm]

9.0 5.0 3.6 70

14.0 7.8 5.6 89

21.0 11.6 8.3 110

39.2 21.8 15.5 156

61.0 33.9 24.2 190

88.2 49.0 35.0 229

139.9 77.7 55.5 288

www.koelner.pl

129


cartridge free disPensing system approVals

rP30 Polyester resin dESCRIPTION: Polyester resin based bonded anchor with styrene is dedicated for connections with medium load capacity. RP30 bonded anchors are designed for fixings in reinforced or plain and uncracked concrete class not lower than C20/25. MATERIAL: Polyester resin

pending

FEATURES: • Fixings of structural elements with medium load capacity in uncracked concrete bases. • Fixings requiring insulation properties (e.g. cables, lighting). • High water resistance. Possibility of fixing in wet base and in openings filled with water.

SUITABLE FOR USE IN: Suitable for studs made of galvanized steel, A4 stainless steel, HDG and HCR.

cfs+ noZZle

pending

• Broad range of lengths and diameters of fitted bars. • Small distances of anchor from the base edge and between anchors. TYPICAL APPLICATION: • Balustrading • Handrails • Canopies • Masonry support

adaPter

cfs+ disPenser gUn

substrate

Product code R-NOZ-10 R-NOZ-100/100

R-STUDS

R-STUDS-FL

pcs. 10 100

Product code R-CFS+-GUN R-CFS+-GUN-PNEU

MINIMUM CURING TIME* AND WORkING TIME Base material temperature

REBAR

R-ITS-Z

-5 0 5 10 15 20 30

SPECIFICATION DATA Product code R-CFS+-RP30-4 R-CFS+-RP30-600-10* * available summer 2011

Foil volume ml 300 600

STUDS INSTALLATION

1. 2. 3. 4.

5.

6.

130

Drill hole to the correct diameter and depth for stud size being used. Clean the hole with brush and hand pump at least four times each. Insert cartridge (or foil) into gun and attach nozzle. Dispense to waste until an even colour is obtained. Insert the mixing nozzle to the far end of the hole and inject the resin, slowly withdrawing the nozzle as the hole is filled to 2/3 of its depth. Immediately insert the rod, slowly and with a slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses. Attach fixture and tighten the nut to the required torque.

Quantity Foil 4 10

Nozzle 4 10

2. 3. 4.

5.

6.

Working time

Minimum curing time*

[minutes]

[hours]

60 40 20 12 8 5 2

6 3 2 80 min 60 min 45 min 20 min

* For wet concrete the curing time must be doubled

SOCkET INSTALLATION

1.

300 ml 300, 600 ml

Drill hole to the correct diameter and depth for socket anchor size being used. Clean the hole with brush and hand pump at least four times each. Insert cartridge (or foil) into gun and attach nozzle. Dispense to waste until an even colour is obtained. Insert the mixing nozzle to the far end of the hole and inject the resin, slowly withdrawing the nozzle as the hole is filled to 2/3 of its depth. Immediately insert the socket anchor, slowly and with a slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses. Attach fixture and tighten the stud with nut to the required torque.

REBAR INSTALLATION

1. 2. 3. 4.

5.

Drill hole to the correct diameter and depth for rebar size being used. Clean the hole with brush and hand pump at least four times each. Insert cartridge (or foil) into gun and attach nozzle. Dispense to waste until an even colour is obtained. Insert the mixing nozzle to the far end of the hole and inject the resin, slowly withdrawing the nozzle as the hole is filled to 2/3 of its depth. Immediately insert rebar, slowly and with a slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses.


cartridge free dispensing system

MECHANICAL PROPERTIES Thread size Stud diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Minimum installation depth Minimum substrate thickness Torque

d d0 dfix h0 hnom hmin Tinst

[mm] [mm] [mm] [mm] [mm] [mm] [Nm]

M8

M10

M12

M16

M20

M24

M30

8 10 9 85 80 110 10

10 12 12 95 90 120 20

12 14 14 115 110 140 40

16 18 18 130 125 155 80

20 24 22 175 170 210 120

24 28 26 215 210 260 180

30 35 32 275 270 330 300

Performance data Non-cracked concrete C20/25 Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads for Shear load Characteristic resistance Design resistance Recommended loads for

M8

M10

M12

M16

M20

M24

M30

hnom

[mm]

80

90

110

125

170

210

270

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

19.1 10.6 7.6 113 225

28.3 15.7 11.2 135 270

39.4 21.9 15.6 158 315

56.5 31.4 22.4 188 375

90.8 50.4 36.0 255 510

110.8 52.8 37.7 271 541

127.2 60.6 43.3 286 571

VRk VRd Vrec cmin

[kN] [kN] [kN] [mm]

9.0 5.0 3.6 70

14.0 7.8 5.6 89

21.0 11.6 8.3 110

39.2 21.8 15.5 156

61.0 33.9 24.2 190

88.2 49.0 35.0 229

139.9 77.7 55.5 288

www.koelner.pl

131


cartridge free disPensing system approVals

rm50 Polyester styrene free resin DESCRIPTION: R-KEM+ is a high performance, styrene free system that is suitable for use in concrete, and other solid or hollow masonry structures. This makes it ideal for applications where conventional expansion anchors present problems.

pending

FEATURES: • Suitable for solid and hollow substrates. • Suitable for overhead applications (with care). • R-KEM+ fits a standard mastic gun. • Styrene free. • Suitable for use in confined spaces MATERIAL: Two component polyester styrene free resin.

substrate

cfs+ noZZle

R-NOZ-10 R-NOZ-100/100

R-STUDS

SUITABLE FOR USE IN: Suitable for studs made of galvanized steel, A4 stainless steel, HDG and HCR in concrete, brickwork, blockwork etc. TYPICAL APPLICATION: • Curtain walling • Balustrading

adaPter

Product code

pcs. 10 100

pending

cfs+ disPenser gUn

Product code R-CFS+-GUN R-CFS+-GUN-PNEU

300 ml 300, 600 ml

R-STUDS-FL MINIMUM CURING TIME* AND WORkING TIME

SP-CE

R-PLS

SPECIFICATION DATA Product code R-CFS+-RM50-4 R-CFS+-RM50-600-10*

Foil volume ml 300 600

Quantity Foil 4 10

Nozzle 4 10

Base material temperature

Working time

Minimum curing time*

[°C]

[minutes]

[minutes]

5 10 20 30

30 15 7 4

180 120 60 30

* For wet concrete the curing time must be doubled

* available summer 2011

STUDS INSTALLATION IN SOLID SUBSTRATES

1. 2. 3. 4. 5. 6.

Drill hole to the correct diameter and depth for stud size being used. Clean the hole with brush and hand pump at least four times each. Insert cartridge (or foil) into gun and attach nozzle. Dispense to waste until an even colour is obtained. Insert the mixing nozzle to the far end of the hole and inject the resin, slowly withdrawing the nozzle as the hole is filled to 2/3 of its depth. Immediately insert the rod, slowly and with a slight twisting motion. Remove any excess resin around the hole before it sets and leave it undisturbed until the curing time elapses. Attach fixture and tighten the nut to the required torque.

STUDS INSTALLATION IN HOLLOW SUBSTRATES AND SUBSTRATES WITH VOIDS

1. 3. 4.

5. 6.

132

Drill hole to the correct diameter and depth for stud or mesh sleeve size being used. 2.1 Solid substrates: Clean the hole with brush and hand pump at least four times each. 2.2 Hollow substrates: Insert mesh sleeve into the hole. Insert cartridge (or foil) into gun and attach nozzle. Dispense to waste until an even colour is obtained. Insert the mixing nozzle to the far end of the hole and inject the resin, slowly withdrawing the nozzle as the hole is filled to: 4.1 Solid substrates: 2/3 of its depth 4.2 Hollow substrates: full mesh. Immediately insert the rod, slowly and with a slight twisting motion. Remove excess of resin around the hole before it sets and leave it undisturbed until the curing time elapses. Attach fixture and tighten the nut to the required torque.


cartridge free dispensing system

MECHANICAL PROPERTIES Solid substrates Thread size Stud diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Minimum installation depth Minimum substrate thickness Torque

d d0 dfix h0 hnom hmin Tinst

[mm] [mm] [mm] [mm] [mm] [mm] [Nm]

Hollow substrates & substrates with voids

M8

M10

M12

M8

M8

M10

M10

M12

8 10 9 85 80 120 10

10 12 12 95 90 130 20

12 14 14 115 110 160 40

8 16 9 90 85 120 10

8 16 9 130 125 250 10

10 16 12 90 85 120 20

10 16 12 130 125 250 20

12 22 14 90 85 120 40

Performance data â&#x20AC;&#x201C; Solid substrates Solid brick Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads for

Aerated concrete

M8

M10

M12

M8

M10

M12

hnom

[mm]

80

90

110

80

90

110

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

8.7 2.9 2.1 40 40

12.1 4.0 2.9 45 45

20.0 6.7 4.8 55 55

2.2 0.7 0.5 40 40

3.1 1.0 0.7 45 45

4.1 1.4 1.0 55 55

Performance data â&#x20AC;&#x201C; Hollow substrates & substrates with voids Hollow brick Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads for

Light hollow concrete

M8

M8

M10

M10

M12

M8

M8

M10

M10

M12

hnom

[mm]

85

125

85

125

85

85

125

85

125

85

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

5.6 1.9 1.4

7.0 2.3 1.6

7.0 2.3 1.6 100 200

7.6 2.5 1.8

7.0 2.3 1.6

3.0 1.0 0.7

4.3 1.4 1.0

4.1 1.4 1.0 100 200

4.7 1.6 1.1

4.1 1.4 1.0

www.koelner.pl

133


Bonded Anchors ApprovalS

copy eco BASE MATERIALS:

FEATURES:

• Concrete C12/15

• Reinforcement of suspension rod in largepanel construction systems • The Copy Eco system according to ITB 360/99 instruction • It can be installed in wet concrete • Minimum substrate thickness 70 mm • Odourless (styren free resin) • Temperature in range from -20°C to +40°C

COMPONENTS:

R-STUDS-A2 – steel grade A2-70 R-STUDS-A4 – steel grade A4-70 R-KER – vinylester styrene free resin, cartridge RV-200 – vinylester styrene free resin, RAWL CFS (cartridge free system) Metal mesh sleeve Φ16×1000

Standard length of studs AND MESH SLEEVES Product code A2-70 steel grade

A4-70 steel grade

R-STUDS-12200-A2-FL R-STUDS-12220-A2-FL R-STUDS-12330-A2-FL R-STUDS-12350-A2-FL R-STUDS-12380-A2-FL

R-STUDS-12200-A4* R-STUDS-12220-A4* R-STUDS-12330-A4* R-STUDS-12350-A4* R-STUDS-12380-A4*

Stud overall length

Thread size

L [mm] 200 220 330 350 380

M12

* made to order

Product code

Mesh sleeve

Stud overall length

SP-CE-R12

Ø16

1000

L [mm]

INSTALLATION DATA 1. Epoxy acrylate resin R-KER, RV200, R-KER-W, RV200-W hole Ø18:   – hef = 110 mm   – hmin = 50 mm 2. Steel mesh sleeve Ø16 3. Threaded rod Ø12-A2   L1 = 350 mm   L2 = 180 mm 4. Nut and washer A2

Minimum curing time* and working time Base material temperature

Working time [minutes]

Minimum curing time* [hours]

[°C]

R-KER, RV200

R-KER-W, RV200-W

R-KER, RV200

R-KER-W, RV200-W

-20 -15 -10 -5 0 5 10 15 20 30 40 * For wet concrete the curing time must be doubled

— — — 60 40 20 12 8 5 2 0.5

100 60 30 16 12 8 5 3 2 — —

— — — 6 3 2 80 min 60 min 45 min 20 min 10 min

24 16 8 4 2 1 45 min 30 min 10 min — —

134


Bonded Anchors bonded ANCHOR STUDS

R-STUDS

R-STUDS-FL

R-STUDS HEXAGONAL HEAD STUDS – zinc plated, 5.8 steel Product code R-STUDS-08110 R-STUDS-08160 R-STUDS-10130 R-STUDS-10170 R-STUDS-10190 R-STUDS-12160 R-STUDS-12190 R-STUDS-12220 R-STUDS-12260 R-STUDS-12300 R-STUDS-16190 R-STUDS-16220 R-STUDS-16260 R-STUDS-16300 R-STUDS-16380 R-STUDS-20260 R-STUDS-20300 R-STUDS-20350** R-STUDS-24300 R-STUDS-30380

M8×110 M8×160 M10×130 M10×170 M10×190 M12×160 M12×190 M12×220 M12×260 M12×300 M16×190 M16×220 M16×260 M16×300 M16×380 M20×260 M20×300 M20×350 M24×300 M30×380

pcs 10 10 10 10 10 10 10 10 10 5 10 10 10 5 1 5 1 1 1 1

R-STUDS stainless steel A4 hexagonal head studs Product code R-STUDS-08110-A4 R-STUDS-08160-A4** R-STUDS-10130-A4 R-STUDS-10170-A4** R-STUDS-10190-A4** R-STUDS-12160-A4 R-STUDS-12190-A4** R-STUDS-12220-A4 R-STUDS-12260-A4** R-STUDS-12300-A4** R-STUDS-16190-A4 R-STUDS-16220-A4** R-STUDS-16260-A4** R-STUDS-16300-A4** R-STUDS-16380-A4** R-STUDS-20260-A4 R-STUDS-20300-A4** R-STUDS-20350-A4** R-STUDS-24300-A4** R-STUDS-30380-A4**

M8×110 M8×160 M10×130 M10×170 M10×190 M12×160 M12×190 M12×220 M12×260 M12×300 M16×190 M16×220 M16×260 M16×300 M16×380 M20×260 M20×300 M20×350 M24×300 M30×380

pcs 10 10 10 10 10 10 10 10 10 5 10 10 10 5 1 5 1 1 1 1

R-STUDS flat head studs – zinc plated, 5.8 steel Product code R-STUDS-08110-FL R-STUDS-08160-FL R-STUDS-10130-FL R-STUDS-10170-FL R-STUDS-10190-FL** R-STUDS-12160-FL R-STUDS-12190-FL R-STUDS-12220-FL R-STUDS-12260-FL R-STUDS-12300-FL** R-STUDS-16190-FL R-STUDS-16220-FL R-STUDS-16260-FL R-STUDS-16300-FL** R-STUDS-16380-FL** R-STUDS-20260-FL R-STUDS-20300-FL R-STUDS-20350-FL R-STUDS-24300-FL R-STUDS-30380-FL**

M8×110 M8×160 M10×130 M10×170 M10×190 M12×160 M12×190 M12×220 M12×260 M12×300 M16×190 M16×220 M16×260 M16×300 M16×380 M20×260 M20×300 M20×350 M24×300 M30×380

R-STUDS HEXAGONAL HEAD STUDS – zinc plated, 8.8 steel pcs 10 10 10 10 10 10 10 10 10 10 10 10 10 5 1 5 1 1 1 1

R-STUDS stainless steel A4 flat head studs Product code R-STUDS-08110-A4FL R-STUDS-08160-A4FL** R-STUDS-10130-A4FL R-STUDS-10170-A4FL R-STUDS-10190-A4FL** R-STUDS-12160-A4FL R-STUDS-12190-A4FL R-STUDS-12220-A4FL** R-STUDS-12260-A4FL** R-STUDS-12300-A4FL** R-STUDS-16190-A4FL R-STUDS-16220-A4FL R-STUDS-16260-A4FL** R-STUDS-16300-A4FL** R-STUDS-16380-A4FL** R-STUDS-20260-A4FL R-STUDS-20300-A4FL** R-STUDS-20350-A4FL** R-STUDS-24300-A4FL R-STUDS-30380-A4FL**

M8×110 M8×160 M10×130 M10×170 M10×190 M12×160 M12×190 M12×220 M12×260 M12×300 M16×190 M16×220 M16×260 M16×300 M16×380 M20×260 M20×300 M20×350 M24×300 M30×380

pcs 10 10 10 10 10 10 10 10 10 10 10 10 10 5 1 5 1 1 1 1

Product code R-STUDS-08110-88** R-STUDS-10130-88** R-STUDS-12160-88** R-STUDS-16190-88** R-STUDS-20260-88** R-STUDS-24300-88** R-STUDS-30380-88**

M8×110 M10×130 M12×160 M16×190 M20×260 M24×300 M30×380

pcs 10 10 10 10 5 1 1

R-STUDS flat head studs – zinc plated, 8.8 steel Product code R-STUDS-08110-88FL** R-STUDS-10130-88FL** R-STUDS-12160-88FL** R-STUDS-16190-88FL** R-STUDS-20260-88FL** R-STUDS-24300-88FL** R-STUDS-30380-88FL**

M8×110 M10×130 M12×160 M16×190 M20×260 M24×300 M30×380

pcs 10 10 10 10 5 1 1

R-STUDS flat head studs – for copy eco system* Product code R-STUDS-12200-A2FL R-STUDS-12220-A2FL R-STUDS-12330-A2FL R-STUDS-12350-A2FL R-STUDS-12380-A2FL

M12×200 M12×220 M12×330 M12×350 M12×380

pcs 10 10 10 10 10

* other sizes made to order ** available in 3rd quarter of 2011

www.koelner.pl

135


bonded ancHors internally tHreaded socKets

Product code Zinc plated

A4 stainless steel

Socket type and Socket overall Hole diameter Hole depth in Hole diameter internal thread length in concrete concrete (mm) in fixture (mm) length (mm) (mm) (Ho) (df) (Lg) (L) (do)

drive system

ITS-Z-06075 — ITS-DRIVE-06 M6x24 75 ITS-Z-08075 — — M8x25 75 ITS-Z-08090 R-ITS-A4-08090 ITS-DRIVE-08 M8x25 90 ITS-Z-10075 R-ITS-A4-10075 — M10x30 75 ITS-Z-10100 R-ITS-A4-10100* ITS-DRIVE-10 M10x30 100 ITS-Z-12100 — ITS-dRIVE-12 M12x35 100 — R-ITS-A4-12100 ITS-dRIVE-12 M12x35 100 ITS-Z-16125 R-ITS-A4-16125* ITS-DRIVE-16 M16x50 125 * made to order Note: All sockets can be used with cartridge systems and in these circumstances a drive system is not required.

12 14 14 20 20 20 22 28

75 75 90 75 100 100 100 125

pcs.

7 9 9 11 11 13 13 17

10 10 10 10 10 6 6 6

disPenser gUns

R-GUN-300-N

R-CFS+-GUN

R-CFS+-GUN-PNEU

R-GUN-345-N

R-GUN-380-N R-GUN-380-PNEU

R-GUN-400-PNEU

R-GUN-400-N

Product code R-GUN-300-N R-GUN-345-N R-GUN-380-N R-GUN-400-N

136

Suitable for 300ml cartridge gun 345ml cartridge gun 380ml cartridge gun 400ml cartridge gun

R-KEM+ R-KER R-KF2 R-KEX

pcs. 1 1 1 1

Product code R-CFS+-GUN R-CFS+-GUN-PNEU R-GUN-380-PNEU R-GUN-400-PNEU

Suitable for 300ml CFS+ gun 600ml / 300ml CFS+ gun 380ml pneumatic cartridge gun 400ml pneumatic cartridge gun

CFS+ CFS+ R-KEM+ R-KEX

pcs. 1 1 1 1


mesH sleeVe l = 1 m

additional socKet driVers and adaPtors for sds maX heXagonal socKet driVers For studs

Product code SP-CE-R10 SP-CE-R12 SP-CE-R16 SP-CE-R20

mm 12 16 22 28

mm M8-M10 M12 M16 M20

pcs. 10 10 10 5

pcs. 10 10 10 5

Plastic sleeVe

R-PLS-12050-10 R-PLS-15085-10 R-PLS-15125-10 R-PLS-20085-10

mm 12 16 16 20

mm 50 85 125 85

HEX

mm M8 M10 M12 M16 M20

mm M8 M10 M12 M16 M20 M24 M30 -

Product code MN-55-005 MN-55-007 MN-55-108 MN-55-112 MN-55-113 MN-55-116 MN-55-117 MN-55-119 MN-55-124 MN-55-130

pcs. 1 1 1 1 1 1 1 1 1 1

pcs. 10 10 10 10 10 5 5 5 1 1

sds MaX adaptors For heXagonal socKet driVers

Length

Product code

FLAT

mm M6-M8 M8-M10 M8-M10 M12

pcs. 10 10 10 10

pcs. 10 10 10 10

bloW PUmP

Ă&#x2DC;

Product code

cal 1/2 3/4

AdAPTER-SdS-12 ADAPTER-SDS-34

pcs. 1 1

pcs. 1 1

metal brUsH

Product code

pcs. 1

R-BLOWPUMP

Product code

driVe Units for socKets

(For use When socKets are used With capsules)

R-BRUSH-M08/M R-BRUSH-M10/M R-BRUSH-M12/M R-BRUSH-M16/M R-BRUSH-M20/M R-BRUSH-M24/M R-BRUSH-M30/M

mm M8 M10 M12 M16 M20 M24 M30

pcs. 1 1 1 1 1 1 1

Plastic brUsH Product code ITS-DRIVE-06 ITS-DRIVE-08 ITS-DRIVE-10 ITS-dRIVE-12 ITS-DRIVE-16

mm For M6 socket For M8 socket For M10 socket For M12 socket For M16 socket

pcs 1 1 1 1 1

Product code R-BRUSH-M08/10 R-BRUSH-M10/14 R-BRUSH-M16/28

mm M8-M10 M12-M14 M16

www.koelner.pl

pcs. 1 1 1

137


High Performance Metal Anchors

R-XPT throughbolt

MateriAl Low-carbon steel 5.8 grade electro-zinc plated (min. 8 Îźm) A4 stainless steel. HDG plated

1 The best load capacities in uncracked concrete.

2 Different useable lengths for each diameter to allow various fixture thicknesses and embedment depth.

3 Shorter anchoring depth results in time and cost savings.

4 Marking on the anchor thread makes selection and checking of the anchoring depth easier.

5 Pivot protruding above the anchor thread protects it during hammering into the hole.

138


High Performance Metal Anchors ApprovalS

R-XPT throughbolt DESCRIPTION: The RAWL® Throughbolt range has been developed to meet the changing demands of the market in terms of product approval levels, ease of fixing and product quality. MATERIAL: carbon steel, zinc electroplated min. 5 µm. carbon steel, dot dip galvanized (R-XPT-HD)

FEATURES: • Embedment depth markings to ensure correct installation in two options: standard and limited. • Cold formed body ensures constant dimensional accuracy. • Optimum cone angle for controlled expansion. • Tested and approved by EOTA.

SUITABLE FOR USE IN: Concrete TYPICAL APPLICATION: • Cladding restraint • Curtain wall • Balustrading • Barriers • Handrails • Racking • Structural Steel • Elevators • Bollards.

Substrate

Product code Zinc electroplated

Product code Hot Dip Galvanized

Size

Anchor length

Max. fixture thickness

L

Standard Reduced tfix tfix

[mm] R-XPT-06050/10* R-XPT-HD-06050/10* 50 R-XPT-06065/5* — 65 M6 R-XPT-06085/25* R-XPT-HD-06085/25* 85 R-XPT-06100/40* R-XPT-HD-06100/40* 100 R-XPT-08050/5* R-XPT-HD-08050/5* 50 R-XPT-08060/10 R-XPT-HD-08060/10* 60 R-XPT-08065/15 R-XPT-HD-08065/15* 65 R-XPT-08075/10 R-XPT-HD-08075/10* 75 R-XPT-08080/15 R-XPT-HD-08080/15* 80 M8 85 R-XPT-08085/20 — R-XPT-08095/30 R-XPT-HD-08095/30* 95 R-XPT-08105/40 R-XPT-HD-08105/40* 105 R-XPT-08115/50 R-XPT-HD-08115/50* 115 R-XPT-08140/75 R-XPT-HD-08140/75* 140 R-XPT-08150/85 — 150 R-XPT-10065/5 R-XPT-HD-10065/5* 65 R-XPT-10080/10 R-XPT-HD-10080/10* 80 R-XPT-10095/25 R-XPT-HD-10095/25* 95 R-XPT-10115/45 R-XPT-HD-10115/45* 115 M10 R-XPT-10130/60 R-XPT-HD-10130/60* 130 R-XPT-10140/70 R-XPT-HD-10140/70* 140 R-XPT-10150/80 — 150 R-XPT-10180/110 — 180 * Not covered by ETA ** Effective embedment depth 65 mm

[mm] 5 25 40 10 15 20 30 40 50 75 85 10 25 45 60 70 80 110

[mm] 10 25 45 60 5 10 15 25 30 35 45 55 65 90 100 5 20 35 55 70 80 90 120

Product code Zinc electroplated

Product code Hot Dip Galvanized

R-XPT-12080/5 R-XPT-12100/5 R-XPT-12120/25 R-XPT-12125/30 R-XPT-12135/40 R-XPT-12140/45 R-XPT-12150/55 R-XPT-12180/85 R-XPT-12220/125* R-XPT-12300/205* R-XPT-16090/10* R-XPT-16100/5 R-XPT-16105/10 R-XPT-16125/5 R-XPT-16140/20 R-XPT-16150/30 R-XPT-16160/40 R-XPT-16180/60 R-XPT-16220/100* R-XPT-16280/160* R-XPT-20125/5 R-XPT-20160/20 R-XPT-20200/60* R-XPT-20300/160* R-XPT-24180/20* R-XPT-24260/100* R-XPT-24300/140*

R-XPT-HD-12080/5* R-XPT-HD-12100/5* R-XPT-HD-12120/25* R-XPT-HD-12125/30* R-XPT-HD-12135/40* — R-XPT-HD-12150/55* R-XPT-HD-12180/85* R-XPT-HD-12220/125* — — R-XPT-HD-16100/5* R-XPT-HD-16105/10* R-XPT-HD-16125/5* R-XPT-HD-16140/20* R-XPT-HD-16150/30* — R-XPT-HD-16180/60* R-XPT-HD-16220/100* — R-XPT-HD-20125/5* R-XPT-HD-20160/20* R-XPT-HD-20200/60* — — R-XPT-HD-24260/100* —

Size

pcs. 100

100

50

M12

M16

M20

M24

Anchor length

Max. fixture thickness

L

Standard Reduced tfix tfix

[mm] 80 100 120 125 135 140 150 180 220 300 90 100 105 125 140 150 160 180 220 280 125 160 200 300 180 260 300

[mm] 5 25 30 40 45 55 85 125 205 5 20 30 40 60 100 160 20 60 160 20 100 140

www.koelner.pl

[mm] 5 25 45 50 60 65 75 105 145 225 10** 5 10 25 40 50 60 80 120 180 5 40 80 180 40 120 160

pcs.

50

10

25

15 25 20 10 10

139


High Performance Metal Anchors

MECHANICAL PROPERTIES â&#x20AC;&#x201C; R-XPT and R-XPT-HD Size

M6

Anchor diameter Hole diameter in substrate Hole diameter in fixture Torque

d d0 dfix Tinst

[mm] [mm] [mm] [Nm]

Minimum hole depth Minimum installation depth Minimum substrate thickness

h0 hnom hmin

[mm] [mm] [mm]

Minimum hole depth Minimum installation depth Minimum substrate thickness

h0 hnom hmin

[mm] [mm] [mm]

M8

M10

M12

M16

M20

M24

10 10 11 30

12 12 13 50

16 16 18 100

20 20 22 200

24 24 26 300

65 59 100

85 80 136

105 100 170

125 119 200

140 135 240

55 49 100

65 60 100

85 80 130

105 99 160

125 120 200

6 8 6 8 7 9 5 15 STANDARD EMBEDMENT 55 60 50 55 100 100 REDUCED EMBEDMENT 35 45 30 40 100 100

Performance data â&#x20AC;&#x201C; R-XPT and R-XPT-HD Non-cracked concrete C20/25 Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads for Shear load Characteristic resistance Design resistance Recommended loads for Installation depth Tension load Characteristic resistance Design resistance Recommended loads for Shear load Characteristic resistance Design resistance Recommended loads for

M6

M8

M10

M12

M16

M20

M24

80

100

119

135

hnom

[mm]

STANDARD EMBEDMENT 50 55 59

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

6.8 3.8 2.7 63 126

12.0 6.7 4.8 74 147

25.0 13.9 9.9 102 204

40.0 22.2 15.9 128 255

40.0 22.2 15.9 149 297

50.0 27.8 19.8 168 336

VRk VRd Vrec cmin

[kN] [kN] [kN] [mm]

19.4 10.8 7.7 130

32.9 18.3 13.1 179

56.6 31.4 22.5 226

83.0 46.1 33.0 274

hnom

[mm]

5.0 8.2 12.3 2.8 4.5 6.8 2.0 3.2 4.9 61 85 109 REDUCED EMBEDMENT 30 40 49

60

80

99

120

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

4.5 2.5 1.8 33 66

9.0 5.0 3.6 48 96

9.0 5.0 3.6 59 117

16.0 8.9 6.3 72 144

30.0 16.7 11.9 98 195

35.0 19.4 13.9 119 237

48.9 27.2 19.4 146 291

VRk VRd Vrec cmin

[kN] [kN] [kN] [mm]

4.5 2.5 1.8 66

7.5 4.2 3.0 89

12.2 6.8 4.8 113

20.0 11.1 7.9 136

31.7 17.6 12.6 186

49.3 27.4 19.6 233

73.5 40.8 29.2 279

12.0 6.7 4.8 71 141

Installation

1. Drill a hole of required diameter and depth. 2. Remove debris and thoroughly clean hole with brush and pump. 3. Lightly tap the throughbolt through the fixture into hole with a hammer, until fixing depth is reached. 4. Tighten to the recommended torque.

140


High Performance Metal Anchors ApprovalS

R-XPT-A4 stainless steel throughbolt DESCRIPTION: The RAWL® Throughbolt range has been developed to meet the changing demands of the market in terms of product approval levels, ease of fixing and product quality. MATERIAL: A4 stainless steel

FEATURES: • Embedment depth markings to ensure correct installation in two options: standard and limited. • Cold formed body ensures constant dimensional accuracy. • Optimum cone angle for controlled expansion. • Tested and approved by EOTA.

Substrate

Product code A4 stainless steel R-XPT-A4-06050/10* R-XPT-A4-06085/25* R-XPT-A4-08060/10* R-XPT-A4-08075/10* R-XPT-A4-08085/20* R-XPT-A4-08095/30* R-XPT-A4-08105/40* R-XPT-A4-08115/50* R-XPT-A4-10065/5* R-XPT-A4-10080/10* R-XPT-A4-10095/25* R-XPT-A4-10115/45* R-XPT-A4-10130/60* R-XPT-A4-10140/70* * Not covered by ETA

Anchor length Max. fixture thickness L Standard tfix Reduced tfix [mm] [mm] [mm] 50 10 M6 85 25 45 60 10 75 10 25 85 20 35 M8 95 30 45 105 40 55 115 50 65 65 5 80 10 20 95 25 35 M10 115 45 55 130 60 70 140 70 80

Size

pcs. 100

100

50

Product code A4 stainless steel R-XPT-A4-12080/5* R-XPT-A4-12100/5* R-XPT-A4-12125/30* R-XPT-A4-12150/55* R-XPT-A4-12180/85* R-XPT-A4-16125/5* R-XPT-A4-16140/20* R-XPT-A4-16150/30* R-XPT-A4-16180/60* R-XPT-A4-16220/100* R-XPT-A4-20125/5* R-XPT-A4-20160/20* R-XPT-A4-20200/60* R-XPT-A4-20300/160* R-XPT-A4-24260/100*

Size

M12

M16

M20 M24

SUITABLE FOR USE IN: Concrete TYPICAL APPLICATION: • Cladding restraint • Curtain wall • Balustrading • Barriers • Handrails • Racking • Structural Steel • Bollards.

Anchor length Max. fixture thickness L Standard tfix Reduced tfix [mm] [mm] [mm] 80 5 100 5 25 125 30 50 150 55 75 180 85 105 125 5 25 140 20 40 150 30 50 180 60 80 220 100 120 125 5 160 20 40 200 60 80 300 160 180 260 100 115

www.koelner.pl

pcs.

50

25

25 10 10

141


High Performance Metal Anchors

MECHANICAL PROPERTIES â&#x20AC;&#x201C; R-XPT-A4 Size

M6

Anchor diameter Hole diameter in substrate Hole diameter in fixture Torque

d d0 dfix Tinst

[mm] [mm] [mm] [Nm]

Minimum hole depth Minimum installation depth Minimum substrate thickness

h0 hnom hmin

[mm] [mm] [mm]

Minimum hole depth Minimum installation depth Minimum substrate thickness

h0 hnom hmin

[mm] [mm] [mm]

M8

Performance data â&#x20AC;&#x201C; R-XPT-a4

for Shear load Characteristic resistance Design resistance Recommended loads for Installation depth Tension load Characteristic resistance Design resistance Recommended loads for Shear load Characteristic resistance Design resistance Recommended loads for

M12

M16

M20

M24

10 10 11 25

12 12 13 60

16 16 18 110

20 20 22 180

24 24 26 320

65 59 100

85 80 136

105 100 170

125 119 200

140 135 240

55 49 100

65 60 100

85 80 130

105 99 160

125 120 200

Non-cracked concrete C20/25

Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads

M10

6 8 6 8 7 9 5 15 STANDARD EMBEDMENT 55 60 50 55 100 100 REDUCED EMBEDMENT 35 45 30 40 100 100

M6

M8

M10

M12

M16

M20

M24

80

100

119

135

hnom

[mm]

STANDARD EMBEDMENT 50 55 59

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

7.6 3.5 2.5 63 126

17.5 8.1 5.8 74 147

26.3 12.2 8.7 102 204

40.5 18.8 13.4 128 255

54.3 25.1 18.0 149 297

64.7 30.0 21.4 168 336

VRk VRd Vrec cmin

[kN] [kN] [kN] [mm]

18.2 10.1 7.2 122

30.9 17.2 12.3 168

53.1 29.5 21.1 212

77.9 43.3 30.9 257

hnom

[mm]

6.4 7.6 11.6 3.6 4.2 6.4 2.5 3.0 4.6 78 79 103 REDUCED EMBEDMENT 30 40 49

60

80

99

120

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

4.5 2.1 1.5 33 66

9.0 4.2 3.0 48 96

9.0 4.2 3.0 59 117

16.0 7.4 5.3 72 144

30.0 13.9 9.9 98 195

35.0 16.2 11.6 119 237

48.9 22.6 16.2 146 291

VRk VRd Vrec cmin

[kN] [kN] [kN] [mm]

5.8 3.2 2.3 85

7.0 3.9 2.8 83

11.4 6.3 4.5 106

18.7 10.4 7.4 127

29.6 16.5 11.8 174

46.3 25.7 18.4 219

69.0 38.3 27.4 262

11.1 5.1 3.7 71 141

Installation

1. Drill a hole of required diameter and depth. 2. Remove debris and thoroughly clean hole with brush and pump. 3. Lightly tap the throughbolt through the fixture into hole with a hammer, until fixing depth is reached. 4. Tighten to the recommended torque.

142


High Performance Metal Anchors ApprovalS

R-HPT TROUGHBOLT DESCRIPTION: The RAWL® Throughbolt range has been developed to meet the changing demands of the market in terms of product approval levels, ease of fixing and product quality. MATERIAL: carbon steel, zinc electroplated min. 5 µm.

FEATURES: • Embedment depth markings to ensure correct installation in two options: standard and limited. • Cold formed body ensures constant dimensional accuracy. • Optimum cone angle for controlled expansion. • Stainless steel expander provides enhanced performance in cracked concrete. • Tested and approved by EOTA.

SUITABLE FOR USE IN: Cracked or non-cracked concrete TYPICAL APPLICATION: • Cladding restraint • Curtain wall • Balustrading • Barriers • Handrails • Racking • Structural Steel • Bollards • Passenger lifts.

Substrate

Anchor length Product code R-HPT-08050/5 R-HPT-08065/15 R-HPT-08080/15 R-HPT-08105/40 R-HPT-08120/55 R-HPT-10065/5 R-HPT-10080/7 R-HPT-10095/22 R-HPT-10115/42 R-HPT-10130/57 R-HPT-12080/5 R-HPT-12100/4 R-HPT-12120/24 R-HPT-12135/39 R-HPT-12150/54 R-HPT-16105/5 R-HPT-16140/20 R-HPT-16180/60 R-HPT-16220/100 R-HPT-20125/5 R-HPT-20160/20 R-HPT-20200/60 R-HPT-20300/160

Size

M8

M10

M12

M16

M20

Max. fixture thickness

L

Standard tfix

Reduced tfix

[mm]

[mm]

[mm]

50 65 80 105 120 65 80 95 115 130 80 100 120 135 150 105 140 180 220 125 160 200 300

15 40 55 7 22 42 57 4 24 39 54 20 60 100 20 60 160

5 15 30 55 70 5 16 32 52 67 5 24 44 58 73 5 40 80 120 5 40 80 180

www.koelner.pl

pcs.

100

50

50

25

25 10

143


High Performance Metal Anchors

MECHANICAL PROPERTIES Size

M8

Anchor diameter Hole diameter in substrate Hole diameter in fixture Torque

d d0 dfix Tinst

[mm] [mm] [mm] [Nm]

Minimum hole depth Minimum installation depth Minimum substrate thickness

h0 hnom hmin

[mm] [mm] [mm]

Minimum hole depth Minimum installation depth Minimum substrate thickness

h0 hnom hmin

[mm] [mm] [mm]

M10

8 10 8 10 9 11 15 25 STANDARD EMBEDMENT 60 65 55 60 100 100 REDUCED EMBEDMENT 45 55 40 50 100 100

Performance data

M12

M16

M20

12 12 13 60

16 16 18 110

20 20 22 180

85 80 140

110 100 170

130 120 200

65 60 100

90 80 130

110 100 160

Cracked concrete C20/25

Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads for Shear load Characteristic resistance Design resistance Recommended loads for Installation depth Tension load Characteristic resistance Design resistance Recommended loads for Shear load Characteristic resistance Design resistance Recommended loads for

M8

M10

M12

Non-cracked concrete C20/25

M16

M20

M8

M10

M12

M16

M20

120

55

60

80

100

120

hnom

[mm]

STANDARD EMBEDMENT 55 60 80 100

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

5,0 2,4 1,7 68 135

16,0 8,9 6,3 128 255

20,0 13,3 9,5 150 300

5,0 5,3 3,8 68 135

9,0 6,4 4,6 75 150

16,0 8,7 6,2 105 210

25,0 15,5 11,1 128 255

40,0 28,1 20,1 150 300

VRk VRd Vrec cmin

[kN] [kN] [kN] [mm]

40,7 22,6 16,2 160

8,3 4,6 3,3 70

11,8 6,6 4,7 75

14,6 8,1 5,8 85

23,7 13,2 9,4 115

40,7 22,6 16,2 160

hnom

[mm]

8,3 11,8 14,6 23,7 4,6 6,6 8,1 13,2 3,3 4,7 5,8 9,4 70 75 85 115 REDUCED EMBEDMENT 40 50 60 80

100

40

50

60

80

100

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

3,0 1,4 1,0 45 90

7,5 3,6 2,6 60 120

9,0 4,3 3,1 75 150

16,0 8,9 6,3 98 195

20,0 13,3 9,5 120 240

4,0 1.9 1.4 45 90

9,0 4.3 3.1 60 120

9,0 4.3 3.1 75 150

20,0 11.1 7.9 98 195

25,0 16.7 11.9 120 240

VRk VRd Vrec cmin

[kN] [kN] [kN] [mm]

6,7 3,7 2,6 80

10,0 5,5 4,0 90

15,3 8,5 6,1 120

27,1 15,1 10,8 150

46,4 25,8 18,4 225

6,7 3,7 2,6 80

10,0 5,5 4,0 90

15,3 8,5 6,1 120

27,1 15,1 10,8 150

46,4 25,8 18,4 225

9,0 4,3 3,1 75 150

12,0 5,7 4,1 105 210

Installation

1. Drill a hole of required diameter and depth. 2. Remove debris and thoroughly clean hole with brush and pump. 3. Lightly tap the throughbolt through the fixture into hole with a hammer, until fixing depth is reached. 4. Tighten to the recommended torque.

144


High Performance Metal Anchors ApprovalS

SAFETYPLUS™

pending

DESCRIPTION: SafetyPlus™ is an all steel high performance expansion anchor, suitable for the most demanding safety critical applications. This range offers exceptional tension, shear and combined load performance in concrete. MATERIAL: 8.8 grade steel, zinc electroplated min. 5 µm.

FEATURES: • 8.8 grade bolt. • High strength steel washer. • Integral controlled collapse and anti-rotation feature ensures fixture is firmly secured. • Unique zig-zag feature provides balanced expansion ensuring secure setting and maximum load carrying capacity. • Case-hardened nut with optimum angle taper for maximum expansion.

Substrate

LOOSE BOLT

BOLT PROJECTING

Product code Loosebolt

Countersunk

Bolt Projecting

R-SPL-08090/15 R-SPL-08110/40 R-SPL-10105/20 R-SPL-10120/40 R-SPL-10140/60 R-SPL-12120/25 R-SPL-12150/50 R-SPL-16145/25 R-SPL-16170/50 R-SPL-20175/30 -

R-SPL-C-08090/20 R-SPL-C-10105/25 R-SPL-C-12125/30 R-SPL-C-16145/30 -

R-SPL-BP-08095/15 R-SPL-BP-10110/20 R-SPL-BP-12135/25 R-SPL-BP-12160/50 R-SPL-BP-16160/25 R-SPL-BP-16185/50 R-SPL-BP-20190/30

Size

M8

M10

M12

M16

M20

SUITABLE FOR USE IN: Concrete TYPICAL APPLICATION: • Structural steel • Masonry support • Cladding restraints • Road signs • Heavy machinery • Racking systems • Industrial doors • Safety barriers.

COUNTERSUNK

L

Tfix

d0

hnom

[mm]

[mm]

[mm]

[mm]

pcs.

90 90 95 110 105 105 110 120 140 120 125 135 150 160 145 145 160 170 185 175 190

15 20 15 40 20 25 20 40 60 25 30 25 50 50 25 30 25 50 50 30 30

12

80

50

15

90

50

18

110

25

24

125

10

28

155

10

www.koelner.pl

145


High Performance Metal Anchors

MECHANICAL PROPERTIES Thread size Anchor diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Minimum installation depth Minimum substrate thickness Torque

d d0 dfix h0 hnom hmin Tinst

[mm] [mm] [mm] [mm] [mm] [mm] [Nm]

M8

M10

M12

M16

M20

8 12 14 80 70 120 25

10 15 17 90 80 140 50

12 18 20 105 95 160 80

16 24 26 125 115 200 180

20 28 30 155 140 240 275

Performance data Non-cracked concrete C20/25 Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads for Shear load Characteristic resistance Design resistance Recommended loads for

R-SPL Installation

M8

M10

M12

M16

M20

hnom

[mm]

70

80

95

115

140

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

16.0 8.9 6.3 90 180

20.0 11.1 7.9 105 210

30.0 14.3 10.2 120 240

50.0 23.8 17.0 150 300

60.0 40.0 28.6 188 375

VRk VRd Vrec cmin

[kN] [kN] [kN] [mm]

27.4 15.2 10.9 188

41.7 23.1 16.5 240

57.2 31.8 22.7 284

97.0 53.9 38.5 378

138.4 76.9 54.9 440

R-SPL-BP Installation

1. Drill a hole of required diameter and depth through clearance hole in the fixture into substrate. 2. Remove debris and thoroughly clean hole. 3. Insert SafetyPlusâ&#x201E;˘ anchor through fixture into hole and tap home. 4. Tighten using torque wrench to the recommended torque.

146

R-SPL-C Installation


High Performance Metal Anchors ApprovalS

RAWLBOLT® Loose bolt SHIELD ANCHOR DESCRIPTION: World’s most popular expanding shield anchor. Easy to use with good load carrying capacity. Ideal general purpose anchor bolt with excellent tolerance to variation in hole size. The collapsible ferrule ensures positive clamping force is transmitted to the fixture. MATERIAL: carbon steel, zinc electroplated min. 5 µm.

pending

FEATURES: • Bolt lengths suitable for fixture thickness up to 150 mm. • Ferrule marked with hole diameter for correct installation. • Pressed steel segments ensure consistent dimensional accuracy. • Optimum taper nut angle for maximum expansion in all substrates. • Shield available seperately.

SUITABLE FOR USE IN: Concrete Brickwork Stone TYPICAL APPLICATION: • Roller shutter doors • Fire doors • Steelwork • Security grills • Machinery • Pipework/duct work supports.

Substrate

Shield

LOOSE BOLT

Product code Loose Bolt R-RBL-M06/10W R-RBL-M06/25W R-RBL-M06/40W R-RBL-M08/10W R-RBL-M08/25W R-RBL-M08/40W R-RBL-M10/10W R-RBL-M10/25W R-RBL-M10/50W R-RBL-M10/75W R-RBL-M12/15W R-RBL-M12/25W R-RBL-M12/40W R-RBL-M12/60W R-RBL-M16/15W R-RBL-M16/30W R-RBL-M16/60W R-RBL-M20/60W R-RBL-M20/100W R-RBL-M24/100W R-RBL-M24/150W

Size

M6

M8

M10

M12

M16 M20 M24

L

Tfix

d0

hnom

[mm]

[mm]

[mm]

[mm]

55 70 85 65 80 95 75 90 115 140 90 105 120 140 135 150 180 195 235 255 300

10 25 40 10 25 40 10 25 50 75 15 25 40 60 15 30 60 60 100 100 150

pcs.

12

50

50

14

55

50

16

65

50

20

85

25

25

125

10

32

140

10

38

160

5 2

Product code Shield R-RB-M06W R-RB-M08W R-RB-M10W R-RB-M12W R-RB-M16W R-RB-M20W R-RB-M24W

M

D

H

[mm]

[mm]

[mm]

pcs.

M6 M8 M10 M12 M16 M20 M24

12 14 16 20 25 32 38

50 55 65 85 125 140 160

100 100 100 50 25 15 5

www.koelner.pl

147


High Performance Metal Anchors

MECHANICAL PROPERTIES Thread size Stud diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Minimum installation depth Minimum substrate thickness Torque

d d0 dfix h0 hnom hmin Tinst

[mm] [mm] [mm] [mm] [mm] [mm] [Nm]

M6

M8

M10

M12

M16

M20

M24

8 10 9 85 80 110 10

10 12 12 95 90 120 20

12 14 14 115 110 140 40

16 18 18 130 125 155 80

20 24 22 175 170 210 120

24 28 26 215 210 260 180

30 35 32 275 270 330 300

Performance data Non-cracked concrete C20/25 Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads for Shear load Characteristic resistance Design resistance Recommended loads for

M6

M8

M10

M12

M16

M20

M24

hnom

[mm]

45

50

60

75

115

130

150

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

9.6 4.4 3.2 105 52.5

12.1 5.6 4.0 120 60

16.7 7.7 5.5 150 75

24.6 11.4 8.1 180 90

57.4 26.6 19.0 285 142.5

79.4 36.8 26.3 345 172.5

99.0 45.8 32.7 375 187.5

VRk VRd Vrec cmin

[kN] [kN] [kN] [mm]

5.0 2.8 2.0 51

8.3 4.6 3.3 72

13.0 7.2 5.2 93

18.9 10.5 7.5 111

38.2 21.2 15.1 152

58.4 32.4 23.2 189

79.6 44.2 31.6 231

Installation

1. Drill a hole of required diameter and depth. Note: When fixing into brickwork, mortar joints should be avoided. 2. Remove debris and thoroughly clean hole with brush and pump. 3. Remove bolt and washer. Insert shield and place fixture over the hole. 4. Insert bolt with washer through the fixture and tighten to the recommended torque.

148


High Performance Metal Anchors ApprovalS

RAWLBOLT® Bolt projecting SHIELD ANCHOR DESCRIPTION: World’s most popular expanding shield anchor. Easy to use with good load carrying capacity. Ideal general purpose anchor bolt with excellent tolerance to variation in hole size. The collapsible ferrule ensures positive clamping force is transmitted to the fixture. MATERIAL: carbon steel, zinc electroplated min. 5 µm.

pending

FEATURES: • Ferrule marked with hole diameter for correct installation. • Pressed steel segments ensure consistent dimensional accuracy. • Optimum taper nut angle for maximum expansion in all substrates. • Shield available seperately.

Substrate

Product code R-RBP-M06/10W R-RBP-M06/25W R-RBP-M06/60W R-RBP-M08/10W R-RBP-M08/25W R-RBP-M08/60W R-RBP-M10/15W R-RBP-M10/30W R-RBP-M10/60W R-RBP-M12/15W R-RBP-M12/30W R-RBP-M12/75W R-RBP-M16/15W R-RBP-M16/35W R-RBP-M16/75W R-RBP-M20/15W R-RBP-M20/30W R-RBP-M20/100W R-RBP-M24/75W R-RBP-M24/150W

Size

M6

M8

M10

M12

M16

M20 M24

SUITABLE FOR USE IN: Concrete Brickwork Stone TYPICAL APPLICATION: • Roller shutter doors • Fire doors • Steelwork • Security grills • Machinery • Pipework/duct work supports.

L

Tfix

d0

hnom

[mm]

[mm]

[mm]

[mm]

pcs.

65 80 115 75 90 125 90 105 135 110 125 170 150 170 210 170 185 255 255 300

10 25 60 10 25 60 15 30 60 15 30 75 15 35 75 15 30 100 75 150

12

50

50

14

55

50

16

65

50

20

85

25

25

125

10

32

140

10

38

160

5 2

www.koelner.pl

149


High Performance Metal Anchors

MECHANICAL PROPERTIES Thread size Stud diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Minimum installation depth Minimum substrate thickness Torque

d d0 dfix h0 hnom hmin Tinst

[mm] [mm] [mm] [mm] [mm] [mm] [Nm]

M6

M8

M10

M12

M16

M20

M24

8 10 9 85 80 110 10

10 12 12 95 90 120 20

12 14 14 115 110 140 40

16 18 18 130 125 155 80

20 24 22 175 170 210 120

24 28 26 215 210 260 180

30 35 32 275 270 330 300

Performance data Non-cracked concrete C20/25 Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads for Shear load Characteristic resistance Design resistance Recommended loads for

M6

M8

M10

M12

M16

M20

M24

hnom

[mm]

45

50

60

75

115

130

150

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

9.6 4.4 3.2 105 52.5

12.1 5.6 4.0 120 60

16.7 7.7 5.5 150 75

24.6 11.4 8.1 180 90

57.4 26.6 19.0 285 142.5

79.4 36.8 26.3 345 172.5

99.0 45.8 32.7 375 187.5

VRk VRd Vrec cmin

[kN] [kN] [kN] [mm]

5.0 2.8 2.0 51

8.3 4.6 3.3 72

13.0 7.2 5.2 93

18.9 10.5 7.5 111

38.2 21.2 15.1 152

58.4 32.4 23.2 189

79.6 44.2 31.6 231

Installation

1. Drill a hole of required diameter and depth. Note: When fixing into brickwork, mortar joints should be avoided. 2. Remove debris and thoroughly clean hole with brush and pump. 3. Remove nut and washer and insert anchor into hole. Position fixture over the thread. 4. Add washer and nut and tighten to recommended torque.

150


High Performance Metal Anchors ApprovalS

RAWLBOLT® Eye and hook bolt SHIELD ANCHOR DESCRIPTION: Suitable for temporary or permanent anchorage. Supplied complete with shield, washer and hex nut. Must not be used for safety harness applications or for lifting where shock load could be applied.

pending

FEATURES: • Eye designed & manufactured for maximum performance. • Ferrule marked with hole diameter to ensure correct installation. • Pressed steel segments ensure consistent dimensional accuracy. • Optimum geometry taper angle for maximum expansion in all substrates.

MATERIAL: carbon steel, zinc electroplated min. 5 µm.

SUITABLE FOR USE IN: Concrete Brickwork Stone TYPICAL APPLICATION: • Supporting guy ropes, stays & cables. • Supporting ladder restraints.

Substrate

EYE BOLT

Product code Eye Bolt

Hook Bolt

R-RBL-M06EW R-RBL-M08EW R-RBL-M10EW R-RBL-M12EW -

R-RBP-M06HW R-RBP-M08HW R-RBP-M10HW R-RBP-M12HW

HOOK BOLT

Size M6 M8 M10 M12

L

d0

hnom

Hook/Eye diameter

[mm]

[mm]

[mm]

[mm]

pcs.

10 8 12 10 14 12 17 16

25

73 83 87 98 108 120 130 145

12

50

14

55

16

65

20

85

www.koelner.pl

151


High Performance Metal Anchors

MECHANICAL PROPERTIES Thread size Anchor diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Minimum installation depth Minimum substrate thickness Torque

d d0 dfix h0 hnom hmin Tinst

[mm] [mm] [mm] [mm] [mm] [mm] [Nm]

M6

M8

M10

M12

8 10 9 85 80 110 10

10 12 12 95 90 120 20

12 14 14 115 110 140 40

16 18 18 130 125 155 80

Performance data Non-cracked concrete C20/25 Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads for Shear load Characteristic resistance Design resistance Recommended loads

for

M6

M8

M10

M12

hnom

[mm]

45

50

60

75

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

9.6 4.4 3.2 105 52.5

12.1 5.6 4.0 120 60

16.7 7.7 5.5 150 75

24.6 11.4 8.1 180 90

VRk VRd Vrec cmin

[kN] [kN] [kN] [mm]

5.0 2.8 2.0 51

8.3 4.6 3.3 72

13.0 7.2 5.2 93

18.9 10.5 7.5 111

EYE bolt Installation

1. Drill a hole of required diameter and depth. Note: When fixing into brickwork, mortar joints should be avoided. 2. Remove debris and thoroughly clean hole with brush and pump. 3. Insert the Eye Bolt or Hook Bolt and position accordingly. 4. Tighten to recommended torque, using the nut (not the eye, hook).

152

HOOK bolt Installation


High Performance Metal Anchors ApprovalS

R-DCA/R-DCL Standard and lipped WEDGE ANCHOR DESCRIPTION: Provides permanently fixed threaded sockets in concrete. Allows bolts or studs to be installed and removed without damaging the anchor. Install with manual setting tool or mechanical setting tool for use with hammer action drilling machines.

FEATURES: • Internally threaded to take stud or bolt. • Easy to install by hammer action. • Slotted sleeve and captive internal tapered wedge to facilitate easy setting and expansion.

SUITABLE FOR USE IN: Concrete TYPICAL APPLICATION: • For permanently fixing threaded sockets in concrete and good quality stone. • Ideal for secure fixing for mechanical services, cable trays, electrical platforms, drain covers, suspended ceilings etc. • Securing equipment that may need to be removed or replaced.

MATERIAL: 5.8 grade steel, zinc electroplated min. 5 µm. A4 stainless steel Substrate

R-DCA

R-DCL

Product code standard R-DCA-06-25* R-DCA-08-30 R-DCA-10-40 R-DCA-12-50 R-DCA-16-65* R-DCA-20-80* * Not covered by ETA

Anchor length

lipped

A4 stainless steel

R-DCL-06* R-DCL-08 R-DCL-10 R-DCL-12 R-DCL-16* -

R-DCA-06-25-A4* R-DCA-08-30-A4* R-DCA-10-40-A4* R-DCA-12-50-A4* R-DCA-16-65-A4* -

Installation

Size

L [mm] 30 30 40 50 65 80

M6 M8 M10 M12 M16 M20

pcs. 100 100 100 50 50 50

pcs. 1500 1000 500 250 100 100

Offset Installation

1. Drill a hole of required diameter and depth. 2. Remove debris and thoroughly clean hole with brush and pump. 3. Insert wedge anchor, slotted end first. 4. Use the setting tool to drive the internal wedge into the anchor. 5. Alternatively use mechanical setting tool with hammer action drilling machine.

MECHANICAL PROPERTIES – R-DCA and R-DCL Thread size Anchor diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Minimum installation depth Minimum substrate thickness Torque

d d0 dfix h0 hnom hmin Tinst

[mm] [mm] [mm] [mm] [mm] [mm] [Nm]

M6

M8

M10

M12

M16

M20

6 8 7 32 30 100 4.5

8 10 9 32 30 100 11

10 12 11 42 40 100 22

12 15 14 53 50 100 38

16 20 18 70 65 140 95

20 25 22 85 80 160 185

www.koelner.pl

153


High Performance Metal Anchors Performance data – R-DCA and R-DCL Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads for Shear load Characteristic resistance Design resistance Recommended loads

for

Non-cracked concrete C20/25 M6

M8

M10

M12

M16

M20

hnom

[mm]

30

30

40

50

65

80

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

7.9 3.7 2.6 45 90

7.5 4.2 3.0 45 90

9.0 5.0 3.6 60 120

16.0 8.9 6.3 75 150

31.8 14.7 10.5 98 195

43.1 20.0 14.3 120 240

VRk VRd Vrec cmin

[kN] [kN] [kN] [mm]

5.2 2.9 2.1 58

7.7 4.3 3.1 72

9.9 5.5 3.9 79

17.4 9.7 6.9 106

40.8 22.7 16.2 171

63.7 35.4 25.3 216

M6

M8

M10

M12

M16

M20

6 8 7 32 30 100 4.5

8 10 9 32 30 100 11

10 12 11 42 40 100 22

12 15 14 53 50 100 38

16 20 18 70 65 140 95

20 25 22 85 80 160 185

MECHANICAL PROPERTIES – R-dca-a4 Thread size Anchor diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Minimum installation depth Minimum substrate thickness Torque

d d0 dfix h0 hnom hmin Tinst

[mm] [mm] [mm] [mm] [mm] [mm] [Nm]

Performance data– R-dca-a4 Non-cracked concrete C20/25 Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads for Shear load Characteristic resistance Design resistance Recommended loads for

M6

M8

M10

M12

M16

M20

hnom

[mm]

30

30

40

50

65

80

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

7.9 3.7 2.6 45 90

7.5 4.2 3.0 45 90

9.0 5.0 3.6 60 120

16.0 8.9 6.3 75 150

31.8 14.7 10.5 98 195

43.1 20.0 14.3 120 240

VRk VRd Vrec cmin

[kN] [kN] [kN] [mm]

5.2 2.9 2.1 58

7.7 4.3 3.1 72

9.9 5.5 3.9 79

17.4 9.7 6.9 106

40.8 22.7 16.2 171

63.7 35.4 25.3 216

Manual Setting Tool

Product code R-DCA-ST-06 R-DCA-ST-08 R-DCA-ST-10 R-DCA-ST-12 R-DCA-ST-16 R-DCA-ST-20

Mechanical Setting Tool*

M mm M6 M8 M10 M12 M16 M20

pcs. 50 50 50 25 25 25

pcs. 1200 1200 1200 600 600 600

Product code R-DCA-SDS-06 R-DCA-SDS-08 R-DCA-SDS-10 R-DCA-SDS-12 R-DCA-SDS-16 R-DCA-SDS-20 * made to order

154

M mm M6 M8 M10 M12 M16 M20

pcs. 1 1 1 1 1 1


High Performance Metal Anchors ApprovalS

SR AND SRS THROUGHBOLTS DESCRIPTION: The diameter of the anchor (expansion clip) is the same as of the drilled hole, thanks to which, in comparison to KT anchors, the bending moment of the SR anchors is much higher. Quick and easy installation with a hammer, by simultaneous high load-bearing capacity.

FEATURES: • Wide range of anchor diameters and lengths. • Through fixture installation.

SUITABLE FOR USE IN: Concrete TYPICAL APPLICATION: • Banners • Racking • Curtain wall • Balustrading

MATERIAL: carbon steel, zinc electroplated min. 5 µm. Substrate

SR

Anchor length Product code SR-06040 SR-06055 SR-06085 SR-08060 SR-08075 SR-08085 SR-08095 SR-10065 SR-10080 SR-10095 SR-10115

Size

M6

M8

M10

L [mm] 40 55 85 50 75 95 115 60 80 100 120

Max. fixture thickness tfix [mm] 2 15 45 3 20 40 60 3 20 40 60

SRS

L [mm] 70 100 130 180 100 120 180 200 160 200 250

Max. fixture thickness tfix [mm] 5 20 50 100 20 40 100 120 45 85 135

pcs. 50 25 25 25 25 25 10 10 10 10 10

pcs. 600 300 300 200 200 200 80 80 80 80 50

63

-

100

2400

Anchor length Product code pcs. 100 100 100 100 100 100 100 50 50 50 50

pcs. 2400 2400 1200 1200 1200 1200 1200 600 600 600 600

Size

SR-12080 SR-12100 M12 SR-12125 SR-12150 SR-16125 SR-16140 M16 SR-16150 SR-16180 SR-20125 M20 SR-20160 SR-20200 CEILING WIRE HANGER – SRS SRS-06063 M6

www.koelner.pl

155


High Performance Metal Anchors

MECHANICAL PROPERTIES Thread size Anchor diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Minimum installation depth Minimum substrate thickness Torque

d d0 dfix h0 hnom hmin Tinst

[mm] [mm] [mm] [mm] [mm] [mm] [Nm]

M6

M8

M10

M12

M16

M20

6 6 7 40 35 150 6

8 8 9 45 40 180 20

10 10 11 50 45 200 30

12 12 14 60 55 220 50

16 16 18 65 60 260 120

20 20 22 80 75 300 180

M6

M8

Performance data Non-cracked concrete C20/25 Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads for Shear load Characteristic resistance Design resistance Recommended loads for

M10

M12

M16

M20

hnom

[mm]

35

40

45

55

60

75

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

3.8 1.5 1.1 90 45

5.3 2.1 1.5 105 52.5

7.8 3.1 2.2 117 58.5

10.1 4.0 2.9 144 72

17.5 6.9 5.0 156 78

25.2 10.0 7.1 195 97.5

VRk VRd Vrec cmin

[kN] [kN] [kN] [mm]

4.2 2.3 1.7 61

7.0 3.9 2.8 85

10.3 5.7 4.1 109

14.8 8.2 5.9 130

24.3 13.5 9.6 185

37.6 20.9 14.9 231

1. Drill a hole of required diameter and depth. 2. Remove debris and thoroughly clean hole with brush and pump. 3. Lightly tap the throughbolt through the fixture into hole with a hammer, until fixing depth is reached. 4. Tighten to the recommended torque.

156


High Performance Metal Anchors ApprovalS

KT AND KTS SLEEVE ANCHORS DESCRIPTION: The anchor is suitable for C12/15 concrete and solid brick applications. Quick and easy installation.

FEATURES: • Through fixture installation • Wide range of anchor lenghts

SUITABLE FOR USE IN: Concrete Stone Brickwork Blockwork

MATERIAL: carbon steel, zinc electroplated min. 5 µm.

Substrate

TYPICAL APPLICATION: • stadium seating • radiators • satelite dishes • signs • shutters • garage doors

KT

KTS Anchor length Product code KT-08040 KT-08055 KT-08085 KT-10040 KT-10050 KT-10060 KT-10080 KT-10100

Size

M6

M8

L [mm] 40 55 85 40 50 60 80 100

Max. fixture thickness tfix [mm] 2 15 45 3 3 10 30 50

L [mm] 60 75 100 130 110 150 105 110 130 150

Max. fixture thickness tfix [mm] 3 15 40 70 50 90 35 40 60 80

pcs. 50 50 50 25 25 20 20 10 10 10

pcs. 600 600 600 300 300 160 160 80 80 80

50

-

50

600

Anchor length Product code pcs. 100 100 100 100 100 50 50 50

pcs. 1200 1200 1200 1200 1200 600 600 600

Size

KT-12060 KT-12075 M10 KT-12100 KT-12130 KT-16110 M12 KT-16150 KT-20105 KT-20110 M16 KT-20130 KT-20150 WITH HOOK – KTS KTS-08050 M6

MECHANICAL PROPERTIES Thread size Anchor diameter Hole diameter in substrate Hole diameter in fixture Minimum hole depth Minimum installation depth Minimum substrate thickness Torque

d d0 dfix h0 hnom hmin Tinst

[mm] [mm] [mm] [mm] [mm] [mm] [Nm]

M6

M8

M10

M12

M16

8 8 9 40 35 70 12

10 10 11 50 40 80 35

12 12 14 60 50 100 70

16 16 18 60 55 110 120

20 20 22 70 60 120 200

Performance data Non-cracked concrete C20/25 Size Installation depth Tension load Characteristic resistance Design resistance Recommended loads for

Blockwork 7.5 N/mm2

M6

M8

M10

M12

M16

M6

M8

M10

M12

M16

hnom

[mm]

35

40

50

55

60

35

40

50

55

60

NRk NRd Nrec cmin smin

[kN] [kN] [kN] [mm] [mm]

6.7 2.2 1.6 70 105

13.4 4.5 3.2 80 120

18.4 6.1 4.4 100 150

21.0 7.0 5.0 110 165

30.6 10.2 7.3 120 180

5.9 2.0 1.4 70 105

7.8 2.6 1.9 80 120

8.7 2.9 2.1 100 150

10.3 3.4 2.4 110 165

13.1 4.4 3.1 120 180

www.koelner.pl

157


High Performance Metal Anchors Installation

1. Drill a hole of required diameter and depth. 2. Remove debris and thoroughly clean hole with brush and pump. 3. Lightly tap the throughbolt through the fixture into hole with a hammer, until fixing depth is reached. 4. Tighten to the recommended torque.

ST Brass ANCHOR DESCRIPTION: Brass Anchor for medium loads. Anchor is set by torquing the screw or stud inducing expansion. Possibility of anchoring in substrates where a deep hole cannot be drilled. Surfaceflush anchorage allows the attached item to be removed and refitted several times. Suitable for all screws and studs with a metric thread.

SUITABLE FOR USE IN: Concrete Solid brickwork Stone

TYPICAL APPLICATION: • Pipes • Gates • Suspended ceilings • Gratings • Scaffolding • Cable trays • Ventilation systems

Substrate

Product code ST-05 ST-06 ST-08 ST-10 ST-12 ST-16

Hole diameter

Hole depth

D

H

Anchor length L

[mm] 7 8 10 12 15 20

[mm] 22 24 32 34 40 48

[mm]

pcs.

pcs.

20 22 30 32 38 45

100 100 100 100 50 50

2400 2400 2400 2400 1200 1200

Installation

1. Drill a hole of required diameter and depth. 2. Remove debris and thoroughly clean hole with brush and pump. 3. Insert brass anchor, slotted end first. 4. Use the manual or mechanical setting tool when required to drive the internal wedge into the anchor. 5. Tighten.

158


Screws, Nails, chains, ropes and ropes accessories

s

rie

so

es

,

ns

a

N

s

il

,

c

s

in

,

e

s

a

n

e

s

s

o

r

p

e

s

a

s

,

s

c

N

h

a

r

,

s i l

,

o

p

c

e

h

s

a

i n

s

,

r

c

ac

r

a

a

ch , ls ai

ro

s

e op

l

s

e

rie

o

s es

i

n

p

N

s

p

es

o , r

d

an

s

pe

ro

ss

ce

ac

ie or

ns

ai

h , c

a

p

c

p

ro , s in

s

es

nd

a

ro

ac

a

i

n

o

ls

ai

N

h

ro

d

c

ie

, c

ils

a

N

i ha

p ro

nd

s pe

s ce

N

a

a

r

d

www.koelner.pl

159

s

o

a

p

c

e

c

s

e

s

s

a

o

r

n

i

d

e

s

r

o

p


ScrewS, NailS, chaiNS, ropeS aNd ropeS acceSSorieS Threaded rodS

heXaGoN STUd coNecTorS

d1

Product code

rod lenGTH 1 M

975-05-1000-48-zN 975-06-1000-48-zN 975-08-1000-48-zN 975-10-1000-48-zN 975-12-1000-48-zN 975-14-1000-48-zN 975-16-1000-48-zN 975-18-1000-48-zN 975-20-1000-48-zN 975-22-1000-48-zN 975-24-1000-48-zN 975-27-1000-48-zN 975-30-1000-48-zN 975-33-1000-48-zN 975-36-1000-48-zN 975-42-1000-48-zN

rod lenGTH 2 M

975-06-2000-48-zN 975-08-2000-48-zN 975-10-2000-48-zN 975-12-2000-48-zN 975-14-2000-48-zN 975-16-2000-48-zN 975-20-2000-48-zN 975-24-2000-48-zN 975-30-2000-48-zN

e

d1

zinc elecTroplATed, din 6334

e

zinc elecTroplATed , 4.8 GrAde, din 975

l

mm

mm

pcs

pcs

M5 M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M42

1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000

50 50 50 25 20 20 10 10 10 5 5 5 5 3 3 3

7500 5000 3000 2000 1300 1000 700 500 500 400 350 250 200 150 120 80

M6 M8 M10 M12 M14 M16 M20 M24 M30

2000 2000 2000 2000 2000 2000 2000 2000 2000

25 25 25 20 10 10 5 5 3

2500 1500 1000 600 500 350 250 175 105

It is possible to order threaded rods in stainless steel A2 i A4.

ZiNc plaTed waFer head SelF drilliNG ScrewS

s

Product code I-6334-05-zN I-6334-06-zN I-6334-08-zN I-6334-10-zN I-6334-12-zN I-6334-16-zN I-6334-20-zN I-6334-24-zN

m

s

d1

s

mmax

emin

mm M5 M6 M8 M10 M12 M16 M20 M24

mm 8 10 13 16 19 24 30 36

mm 15 18 24 30 36 48 60 72

mm 8.79 11.05 15 19.6 21.9 27.7 34.6 40.5

pcs 1000 500 250 125 75 40 20 10

ZiNc plaTed waFer head ScrewS

pcs 4000 2000 1000 500 300 160 80 40

ApprovAlS

ApprovAlS

D

WiTH drillinG cApAciTY Up To 2.5 MM

L

D

Product Code L

Product Code WFS-4213 WFS-4216 WFS-4219 WFS-4222 WFS-4225 WFS-4232

160

D×L mm 4,2×13 4,2×16 4,2×19 4,2×22 4,2×25 4,2×32

Max. drilling thickness mm 2,5 2,5 2,5 2,5 2,5 2,5

pcs. 1000 1000 500 500 500 500

pcs. 24000 24000 12000 12000 12000 12000

WF-4213 WF-4216 WF-4219 WF-4222 WF-4225 WF-4232 WF-4240 WF-4250 WF-4265 WF-4275

D×L mm 4,2×13 4,2×16 4,2×19 4,2×22 4,2×25 4,2×32 4,2×40 4,2×50 4,2×65 4,2×75

pcs. 1000 1000 500 500 500 500 500 500 250 250

pcs. 24000 24000 12000 12000 12000 12000 6000 6000 3000 3000


Screws, Nails, chains, ropes and ropes accessories SPECIAL COUNTERSUNK FLAT HEAD HARDENED SCREWS Approval

AT-15-6843/2005

Product code UC-S-3016 UC-S-3020 UC-S-3025 UC-S-3030 UC-S-3040 UC-S-3516 UC-S-3520 UC-S-3525 UC-S-3530 UC-S-3540 UC-S-3550 UC-S-4016 UC-S-4020 UC-S-4025 UC-S-4030 UC-S-4040 UC-S-4050 UC-S-4060 UC-S-4070 UC-S-5025 UC-S-5030 UC-S-5040 UC-S-5050 UC-S-5060 UC-S-5070 UC-S-5080 UC-S-5100 UC-S-6030 UC-S-6040 UC-S-6050 UC-S-6060 UC-S-6070 UC-S-6080 UC-S-6100

mm 3.0×16 3.0×20 3.0×25 3.0×30 3.0×40 3.5×16 3.5×20 3.5×25 3.5×30 3.5×40 3.5×50 4.0×16 4.0×20 4.0×25 4.0×30 4.0×40 4.0×50 4.0×60 4.0×70 5.0×25 5.0×30 5.0×40 5.0×50 5.0×60 5.0×70 5.0×80 5.0×100 6.0×30 6.0×40 6.0×50 6.0×60 6.0×70 6.0×80 6.0×100

Pz1 Pz1 Pz1 Pz1 Pz1 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz3 Pz3 Pz3 Pz3 Pz3 Pz3 Pz3

pcs 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 500 1000 1000 1000 500 500 500 500 250 500 500 250 200 200 200 100 100 200 200 200 200 100 100 100

pcs 24000 24000 18000 18000 12000 24000 18000 18000 18000 12000 6000 18000 18000 18000 9000 9000 6000 6000 6000 9000 9000 4500 3600 2400 2400 1800 1200 3600 3600 3600 2400 1800 1200 1200

Product code UCM-S-3016 UCM-S-3020 UCM-S-3025 UCM-S-3030 UCM-S-3040 UCM-S-3516 UCM-S-3520 UCM-S-3525 UCM-S-3530 UCM-S-3540 UCM-S-3550 UCM-S-4016 UCM-S-4020 UCM-S-4025 UCM-S-4030 UCM-S-4040 UCM-S-4050 UCM-S-4060 UCM-S-4070 UCM-S-5025 UCM-S-5030 UCM-S-5040 UCM-S-5050 UCM-S-5060 UCM-S-5070 UCM-S-5080 UCM-S-5100 UCM-S-6030 UCM-S-6040 UCM-S-6050 UCM-S-6060 UCM-S-6070 UCM-S-6080 UCM-S-6100 – Full thread  

mm 3.0×16 3.0×20 3.0×25 3.0×30 3.0×40 3.5×16 3.5×20 3.5×25 3.5×30 3.5×40 3.5×50 4.0×16 4.0×20 4.0×25 4.0×30 4.0×40 4.0×50 4.0×60 4.0×70 5.0×25 5.0×30 5.0×40 5.0×50 5.0×60 5.0×70 5.0×80 5.0×100 6.0×30 6.0×40 6.0×50 6.0×60 6.0×70 6.0×80 6.0×100

Pz1 Pz1 Pz1 Pz1 Pz1 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz2 Pz3 Pz3 Pz3 Pz3 Pz3 Pz3 Pz3

pcs 30000 25000 20000 16000 10000 30000 25000 20000 12000 7500 5000 20000 18000 12000 10000 6500 4500 3000 2200 9000 7000 4500 3300 2400 1800 1400 900 4500 3500 2500 1900 1400 1200 750

kg 16.80 17.50 16.00 15.00 12.00 24.00 25.00 22.40 16.00 12.50 10.00 20.00 21.00 18.00 17.00 14.00 11.70 9.10 7.00 22.10 19.50 16.00 14.00 12.30 10.40 9.00 7.10 18.00 17.50 15.50 13.60 11.60 11.20 8.60

– Partial thread

www.koelner.pl

161


Screws, Nails, chains, ropes and ropes accessories ApprovalS

COUNTERSUNK FLAT HEAD HARDENED CHIPBOARD SCREWS zinc electroplated

UC Product code UC-3012 UC-3016 UC-3020 UC-3025 UC-3030 UC-3035 UC-3040 UC-3512 UC-3516 UC-3520 UC-3525 UC-3530 UC-3535 UC-3540 UC-3545 UC-3550 UC-4016 UC-4020 UC-4025 UC-4030 UC-4035 UC-4040 UC-4045 UC-4050 UC-4060 UC-4070 UC-4080 UC-4530 UC-4535 UC-4540 UC-4545 UC-4550

UCM-3012 UCM-3016 UCM-3020 UCM-3025 UCM-3030 UCM-3035 UCM-3040 UCM-3512 UCM-3516 UCM-3520 UCM-3525 UCM-3530 UCM-3535 UCM-3540 UCM-3545 UCM-3550 UCM-4016 UCM-4020 UCM-4025 UCM-4030 UCM-4035 UCM-4040 UCM-4045 UCM-4050 UCM-4060 UCM-4070 UCM-4080 UCM-4530 UCM-4535 UCM-4540 UCM-4545 UCM-4550

mm 3.0×12 3.0×16 3.0×20 3.0×25 3.0×30 3.0×35 3.0×40 3.5×12 3.5×16 3.5×20 3.5×25 3.5×30 3.5×35 3.5×40 3.5×45 3.5×50 4.0×16 4.0×20 4.0×25 4.0×30 4.0×35 4.0×40 4.0×45 4.0×50 4.0×60 4.0×70 4.0×80 4.5×30 4.5×35 4.5×40 4.5×45 4.5×50

PZ1 PZ1 PZ1 PZ1 PZ1 PZ1 PZ1 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2

pcs 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 500 500 1000 1000 1000 500 500 500 500 500 500 250 100 500 500 250 250 250

pcs 24000 24000 24000 18000 18000 18000 12000 24000 24000 18000 18000 18000 12000 12000 9000 6000 18000 18000 18000 9000 9000 9000 9000 6000 6000 3000 1800 9000 9000 4500 4500 4500

UCM pcs 50000 40000 30000 25000 18000 15000 10000 40000 30000 25000 16000 13000 10000 9000 8000 4000 25000 20000 15000 12000 9000 7000 6000 5000 4000 3000 2000 8000 7000 6000 5000 4000

kg 22.50 22.40 18.90 20.00 17.64 16.50 12.50 24.40 22.50 22.00 17.12 16.64 15.00 14.76 14.56 8.12 25.00 23.40 20.40 18.72 16.65 14.70 13.56 12.50 11.96 10.32 7.70 17.44 16.80 16.68 15.35 13.60

UC Product code UC-4560 UC-4570 UC-4580 UC-5020 UC-5025 UC-5030 UC-5035 UC-5040 UC-5045 UC-5050 UC-5060 UC-5070 UC-5080 UC-5090 UC-5100 UC-5120 UC-6030 UC-6040 UC-6050 UC-6060 UC-6070 UC-6080 UC-6090 UC-6100 UC-6110 UC-6120 UC-6130 UC-6140 UC-6150 UC-6160 UC-6180 UC-6200

UCM-4560 UCM-4570 UCM-4580 UCM-5020 UCM-5025 UCM-5030 UCM-5035 UCM-5040 UCM-5045 UCM-5050 UCM-5060 UCM-5070 UCM-5080 UCM-5090 UCM-5100 UCM-5120 UCM-6030 UCM-6040 UCM-6050 UCM-6060 UCM-6070 UCM-6080 UCM-6090 UCM-6100 UCM-6110 UCM-6120 UCM-6130 UCM-6140 UCM-6150 UCM-6160 UCM-6180 UCM-6200

– Pełny gwint  

162

mm 4.5×60 4.5×70 4.5×80 5.0×20 5.0×25 5.0×30 5.0×35 5.0×40 5.0×45 5.0×50 5.0×60 5.0×70 5.0×80 5.0×90 5.0×100 5.0×120 6.0×30 6.0×40 6.0×50 6.0×60 6.0×70 6.0×80 6.0×90 6.0×100 6.0×110 6.0×120 6.0×130 6.0×140 6.0×150 6.0×160 6.0×180 6.0×200

PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ2 PZ3 PZ3 PZ3 PZ3 PZ3 PZ3 PZ3 PZ3 PZ3 PZ3 PZ3 PZ3 PZ3 PZ3 PZ3 PZ3

– Niepełny gwint

pcs 250 250 100 500 500 500 500 250 250 200 200 200 100 100 100 100 200 200 200 200 100 100 100 100 100 100 100 100 100 100 100 100

pcs 3000 3000 1800 9000 9000 9000 9000 4500 4500 3600 2400 2400 1800 1200 1200 1200 3600 3600 3600 2400 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200 1200

UCM pcs 3000 2000 1800 12000 10000 8000 6000 5000 4000 4000 2500 2000 1800 1300 1000 800 5000 4000 2500 1800 1500 1300 1000 800 600 600 600 600 500 500 500 500

kg 12.06 8.90 9.36 23.64 23.70 22.00 18.96 17.10 15.72 17.20 12.30 11.44 11.52 9.31 8.00 7.72 21.20 20.92 15.63 13.45 12.92 12.58 10.73 9.52 7.68 8.52 9.07 9.74 8.73 9.10 10.37 11.40


Screws, Nails, chains, ropes and ropes accessories HEXAGONAL HEAD COACHSCREWS DIN 571 zinc electroplated

Product code 571-06040-ZN 571-06060-ZN 571-06070-ZN 571-06080-ZN 571-06090-ZN 571-06100-ZN 571-06120-ZN 571-08040-ZN 571-08050-ZN 571-08060-ZN 571-08070-ZN 571-08080-ZN 571-08090-ZN 571-08100-ZN 571-08110-ZN 571-08120-ZN 571-08140-ZN 571-08160-ZN 571-08180-ZN 571-08200-ZN 571-08220-ZN 571-08240-ZN

mm 6.0×40 6.0×60 6.0×70 6.0×80 6.0×90 6.0×100 6.0×120 8.0×40 8.0×50 8.0×60 8.0×70 8.0×80 8.0×90 8.0×100 8.0×110 8.0×120 8.0×140 8.0×160 8.0×180 8.0×200 8.0×220 8.0×240

kg 8.20 11.20 12.80 14.40 16.00 17.60 20.80 15.60 18.20 20.90 23.60 26.50 29.40 32.00 34.90 37.80 44.25 50.00 53.48 59.17 65.00 70.80

kg 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

Product code 571-08260-ZN 571-10050-ZN 571-10060-ZN 571-10080-ZN 571-10100-ZN 571-10120-ZN 571-10140-ZN 571-10160-ZN 571-10180-ZN 571-10200-ZN 571-10220-ZN 571-10240-ZN 571-10260-ZN 571-10280-ZN 571-10300-ZN 571-12070-ZN 571-12080-ZN 571-12100-ZN 571-12120-ZN 571-12140-ZN 571-12160-ZN 571-12180-ZN 571-12200-ZN 571-12220-ZN 571-12240-ZN 571-12260-ZN 571-12280-ZN 571-12300-ZN 571-12350-ZN

mm 8.0×260 10.0×50 10.0×60 10.0×80 10.0×100 10.0×120 10.0×140 10.0×160 10.0×180 10.0×200 10.0×220 10.0×240 10.0×260 10.0×280 10.0×300 12.0×70 12.0×80 12.0×100 12.0×120 12.0×140 12.0×160 12.0×180 12.0×200 12.0×220 12.0×240 12.0×260 12.0×280 12.0×300 12.0×350

kg 76.60 32.00 36.40 45.10 53.90 62.30 70.92 80.65 93.46 103.09 106.38 114.94 123.46 132.00 140.50 57.50 64.30 76.90 89.20 102.04 113.64 125.00 136.99 151.52 166.67 178.57 192.31 222.22 297.01

www.koelner.pl

kg 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

163


ScrewS, NailS, chaiNS, ropeS aNd ropeS acceSSorieS decKiNG ScrewS Special cutter to ensure faster fixing into wood

Product code DS-4050 DS-4060 DS-5050 DS-5060 DS-5080

mm 4.0×50 4.0×60 5.0×50 5.0×60 5.0×80

pcs 500 350 400 300 200

Coarse threaded for effective cutting into tanalised timber boards Double-angled countersunk head to ensure high strength fixing

FUrNiTUre ScrewS

STUd ScrewS – ZiNc plaTed

Product code WD-08080-zN WD-08100-zN WD-08120-zN WD-08140-zN WD-08160-zN WD-08180-zN WD-08200-zN WD-08220-zN WD-08250-zN WD-10080-zN WD-10100-zN WD-10120-zN WD-10140-zN WD-10160-zN WD-10180-zN WD-10200-zN

164

mm 8.0×80 8.0×100 8.0×120 8.0×140 8.0×160 8.0×180 8.0×200 8.0×220 8.0×250 10.0×80 10.0×100 10.0×120 10.0×140 10.0×160 10.0×180 10.0×200

High-tech organic coating

pcs 250 200 150 150 100 100 100 75 75 200 150 100 75 75 50 50

SockeT HeAd

pcs 1000 800 600 600 400 400 400 300 300 800 600 400 300 300 200 200

Product code white zinc electroplated KONF-6450-zNB KONF-7050-zNB KONF-7070-zNB yellow zinc electroplated KONF-6450-zNY KONF-7050-zNY KONF-7070-zNY

mm

pcs

6.4×50 7.0×50 7.0×70

Hex4 Hex4 Hex4

1000 1000 1000

6.4×50 7.0×50 7.0×70

Hex4 Hex4 Hex4

1000 1000 1000


Screws, Nails, chains, ropes and ropes accessories COMMON NAILS din 1151b

COMMON NAILS din 1151b zinc electroplated

Product code T-GB-20040-5 T-GB-22050-5 T-GB-25060-5 T-GB-28065-5 T-GB-30070-5 T-GB-30080-5 T-GB-35090-5 T-GB-40100-5 T-GB-45125-5 T-GB-50150-5 T-GB-60175-5 T-GB-70200-5 T-GB-70230-5 T-GB-80250-5 T-GB-80280-5 T-GB-80300-5

mm 2.0×40 2.2×50 2.5×60 2.8×65 3.0×70 3.0×80 3.5×90 4.0×100 4.5×125 5.0×150 6.0×175 7.0×200 7.0×225 8.0×250 8.0×275 8.0×300

kg 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

masonry nails

Product code T-GB-20040-OC T-GB-22050-OC T-GB-25060-OC T-GB-28065-OC T-GB-30070-OC T-GB-30080-OC T-GB-35090-OC T-GB-40100-OC T-GB-45125-OC T-GB-50150-OC T-GB-60175-OC T-GB-70200-OC T-GB-70230-OC T-GB-80250-OC T-GB-80280-OC T-GB-80300-OC

mm 2.0×40 2.2×50 2.5×60 2.8×65 3.0×70 3.0×80 3.5×90 4.0×100 4.5×125 5.0×150 6.0×175 7.0×200 7.0×225 8.0×250 8.0×275 8.0×300

kg 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

ROOFING NAILS din 1160a

zinc electroplated

Product code R-MNL-25025 R-MNL-25030 R-MNL-25040 R-MNL-30050 R-MNL-30060 R-MNL-35075 R-MNL-35100

mm 2.5×25 2.5×30 2.5×40 3.0×50 3.0×60 3.5×75 3.5×100

pcs. 100 100 100 100 100 100 100

masonry nails with washer zinc electroplated

Product code R-MNL-W-37030 R-MNL-W-37040 R-MNL-W-37050

mm 3.7×30 3.7×40 3.7×50

kg 100 100 100

Product code T-GPA-30020 T-GPA-30025 T-GPA-30030 T-GPA-30035 T-GPA-30040

mm 3.0×20 3.0×25 3.0×30 3.0×35 3.0×40

kg 5 5 5 5 5

ROOFING NAILS din 1160a zinc electroplated

Product code T-GPA-30020-OC T-GPA-30025-OC T-GPA-30030-OC T-GPA-30035-OC T-GPA-30040-OC

mm 3.0×20 3.0×25 3.0×30 3.0×35 3.0×40

www.koelner.pl

kg 5 5 5 5 5

165


Screws, Nails, chains, ropes and ropes accessories SPIRAL SHANK NAILS din 68163A

SPIRAL SHANK NAILS din 68163A zinc electroplated

Product code T-GS-30050 T-GS-30060 T-GS-35070 T-GS-35080 T-GS-35090 T-GS-35100 T-GS-45125

mm 3.0×50 3.0×60 3.5×70 3.5×80 3.5×90 3.5×100 4.5×125

kg 5 5 5 5 5 5 5

Product code

RING SHANK NAILS din 68163k

Product code T-GP-30050 T-GP-30060 T-GP-35070 T-GP-35080 T-GP-35090 T-GP-35100 T-GP-45125

mm 3.0×50 3.0×60 3.5×70 3.5×80 3.5×90 3.5×100 4.5×125

kg 5 5 5 5 5 5 5

zinc electroplated

Product code

mm 3.0×50 3.0×60 3.5×70 3.5×80 3.5×90 3.5×100 4.5×125

T-GP-30050-OC T-GP-30060-OC T-GP-35070-OC T-GP-35080-OC T-GP-35090-OC T-GP-35100-OC T-GP-45125-OC

RING SHANK TIMBER NAILS

ROOFING NAIL WASHERS

zinc electroplated

zinc electroplated

Product code D-I-440 D-I-450 D-I-460 D-I-475 D-I-4100 D-I-4125

GPAP7 mm 4.0×40 4.0×50 4.0×60 4.0×75 4.0×100 4.0×125

kg 1 1 1 1 1 1

kg 5 5 5 5 5 5 5

RING SHANK NAILS din 68163k

Product code

mm 25-28

kg 5 5 5 5 5 5 5

kg 10

GALVANIZED FENCE STAPLES

Product code T-GSK-30025-OC T-GSK-30030-OC T-GSK-35035-OC

166

mm 3.0×50 3.0×60 3.5×70 3.5×80 3.5×90 3.5×100 4.5×125

T-GS-30050-OC T-GS-30060-OC T-GS-35070-OC T-GS-35080-OC T-GS-35090-OC T-GS-35100-OC T-GS-45125-OC

mm 3.0×25 3.0×30 3.0×35

kg 5 5 5


ScrewS, NailS, chaiNS, ropeS aNd ropeS acceSSorieS welded chaiNS diN 5685a

welded chaiNS diN 5685c

WiTH SHorT linkS, zinc elecTroplATed

Product code T-LST-03-K T-LST-04-K T-LST-05-K T-LST-06-K

mm 3.0 4.0 5.0 6.0

WiTH lonG linkS, zinc elecTroplATed

Product code

m 50 25 25 20

mm 3.0 4.0 5.0 6.0

T-LG-03-K T-LG-04-K T-LG-05-K T-LG-06-K

STeel ropeS

T-LS-012-K T-LS-015-K T-LS-020-K T-LS-030-K T-LS-040-K T-LS-050-K T-LS-060-K T-LS-080-K

DIN 3053 DIN 3053 DIN 3055 DIN 3055 DIN 3055 DIN 3060 DIN 3060 DIN 3066

mm 1.2 1.5 2.0 3.0 4.0 5.0 6.0 8.0

m 50 25 25 20

Product code

mm 1.4 2.2 2.8

T-LO-LV-14/01 T-LO-LV-22/01 T-LO-LV-28/01

m 50 25 25

plaiTed polypropyleNe ropeS

zinc elecTroplATed

Product code

KNoTTed chaiNS diN 5686

1×19 1×19 6×7 6×7 6×7 6×19 6×19 6×37

MAX

F

kg 22.3 39.7 44.3 96.7 171.6 268.4 387.4 688.1

kN 1.34 2.38 2.66 5.80 10.30 16.10 23.22 41.29

Product code m 500 300 250 200 100 100 100 50

MAX – maximum load capacity with safety factor = 6 F – tensile force [kN]

T-LP-03 T-LP-04 T-LP-05 T-LP-06 T-LP-08 T-LP-10 T-LP-12 T-LP-14 T-LP-16 T-LP-18 T-LP-20

MAX kg 160 275 360 490 865 1380 1480 1750 2050 3100 3300

mm 3.0 4.0 5.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0

m 600 400 300 300 300 200 150 100 80 60 50

MAX – maximum load capacity.

STeel ropeS

elaSTic ropeS

zinc elecTroplATed, pvc coATed

Product code T-LS-030-PCV-K T-LS-040-PCV-K T-LS-050-PCV-K T-LS-060-PCV-K T-LS-080-PCV-K

DIN 3055 DIN 3055 DIN 3055 DIN 3055 DIN 3055

mm 3.0 4.0 5.0 6.0 8.0

4.0 6.0 7.0 8.0 10.0

6×7 6×7 6×7 6×7 6×7

MAX

F

kg 114.66 175.00 271.66 391.66 696.66

kN 5.88 10.50 16.30 23.50 41.80

Product code m 250 250 150 100 50

T-LE-04 T-LE-06 T-LE-08 T-LE-10

mm 4 6 8 10

m 200 150 100 100

MAX – maximum load capacity with safety factor = 6 F – tensile force [kN]

www.koelner.pl

167


Screws, Nails, chains, ropes and ropes accessories STRAIGHT SHACKLES

WIRE ROPE CLIPS DIN 741

zinc electroplated

zinc electroplated

A

B

B

H

H

H

C

C

D

A

T-SZEK-05 T-SZEK-06 T-SZEK-08 T-SZEK-10 T-SZEK-12 T-SZEK-14 T-SZEK-16 T-SZEK-20

A mm 5 6 8 10 12 14 16 20

80 100 200 300 500 600 800 1300

B mm 10 12 17 20 24 28 31 40

Dimensions C D mm mm 32 5 38 6 50 8 61 10 78 12 87 14 102 16 104 20

D

d L

H mm 20 24 31 37 48 54 63 61

L mm 10 13 17 19 25 29 32 27

pcs

pcs 50 50 25 20 15 15 10 5

1500 900 450 300 150 100 80 40

THIMBLES DIN 6899 zinc electroplated L

T-KA-025 T-KA-03 T-KA-04 T-KA-05 T-KA-06 T-KA-08 T-KA-10 T-KA-12 T-KA-14 T-KA-16 T-KA-20

Size mm 3 4 5 6 7 8 10 12 14 16 20

T-ZLK-030 T-ZLK-050 T-ZLK-060 T-ZLK-080 T-ZLK-100 T-ZLK-110 T-ZLK-130 T-ZLK-140 T-ZLK-160 T-ZLK-190 T-ZLK-220

Tearing load kg 600 850 1100 1800 2800 3300 4000 4500 5000 7600 8000

D mm 3 5 6 8 10 11 12 14 16 20 22

Dimensions d H B mm mm mm M4 21 10 M5 24 11 M5 28 12 M6 35 14 M8 42 18 M8 44 20 M10 55 23 M10 55 24 M12 63 26 M12 75 28 M14 86 33

L mm 21 22 26 30 34 37 40 44 52 53 60

pcs

pcs

100 50 50 50 50 20 20 20 20 10 10

2400 1200 1200 900 500 500 300 250 100 120 60

“S” LINKS

H

Product code

Product code

B

zinc electroplated

Dimensions Usable with lines [j] mm 2.5-3.0 3.0-4.0 4.0-5.0 5.0-6.0 6.0-7.0 7.0-8.0 8.0-10.0 10.0-12.0 12.0-14.0 14.0-16.0 18.0-20.0

L mm 12 13 14 16 18 20 24 28 32 36 45

H mm 19 21 23 25 28 32 38 45 51 58 72

pcs 100 100 50 50 50 25 25 20 10 10 10

pcs 2400 2400 1200 1200 900 450 300 240 120 120 60

H

Product code

Max. resist. kg

L

D

L

S

D

Product code T-LUS-03 T-LUS-04 T-LUS-05 T-LUS-06

Max. resist. kg 40 60 80 100

Size mm 3×24 4×35 5×40 6×48

QUICK LINKS WITHOUT SCREW LOCK

SWIVELS

zinc electroplated

zinc electroplated

Dimensions D H mm mm 3 24 4 35 5 40 6 48

S mm 4 9 8 9

pcs 100 50 50 50

pcs 1200 900 900 900

H

L

d

A

C

S

D

Product code

Size mm

T-LUZ-035 T-LUZ-050 T-LUZ-060

4×20 5×26 6×32

168

A mm 7 13 14

Dimensions D H mm mm 4 20 5 26 5,6 32

S mm 11 11 20

pcs 100 50 50

pcs 1200 900 900

Product code T-OOK-06 T-OOK-08 T-OOK-10

D mm 6 8 10

Dimensions C mm 64 106 124

L mm 12 20 30

pcs 25 25


Screws, Nails, chains, ropes and ropes accessories SNAP HOOKS WITHOUT SCREW LOCK

SNAP HOOKS WITH SCREW LOCK

zinc electroplated, TYP C DIN 5299 C

zinc electroplated, TYP D DIN 5299 D A T

H

H

A T

S

S

D

D

Product code T-KARC-04 T-KARC-05 T-KARC-06 T-KARC-07 T-KARC-08 T-KARC-09 T-KARC-10

Size mm 40×4 50×5 60×6 70×7 80×8 90×9 100×10

Max. resist. kg 80 100 120 180 230 250 350

Dimensions A D H S T mm mm mm mm mm 6 4 40 6 4 8 5 50 7 5 9 6 60 8 5 10 7 70 8 7 12 8 80 10 9 12 9 90 10 10 15 10 100 13 11

pcs

pcs

100 50 50 25 25 25 15

2400 1200 900 450 450 450 270

QUICK LINKS WITH SCREW LOCK

T-KARD-04 T-KARD-05 T-KARD-06 T-KARD-07 T-KARD-08 T-KARD-09 T-KARD-10

Size mm 40×4 50×5 60×6 70×7 80×8 90×9 100×10

Max. resist. kg 80 100 120 180 230 250 350

Dimensions A D H S T mm mm mm mm mm 6 4 40 6 4 8 5 50 7 5 9 6 60 8 5 10 7 70 8 7 12 8 80 10 9 12 9 90 10 10 15 10 100 13 11

pcs

pcs

100 50 50 25 25 25 15

2400 1200 900 450 450 450 270

BOLTS WITH EYE AND NUT zinc electroplated

d

B A

D

zinc electroplated, DIN 5299

Product code

C

Product code T-LU-04 T-LU-06 T-LU-08

Size mm 4 6 8

Max. resist. kg 90 200 350

Dimensions A B C D mm mm mm mm 32 39.5 11 5.5 45 57 14 7.5 58 74 17 10

B

pcs 50 50 25

pcs 1200 900 450

EYE BOLT

Dimensions

Product code

d mm M8 M10

T-SNP-08 T-SNP-10

B mm 150 150

pcs 300 120

pcs 25 10

THREADED EYE NUTS

zinc electroplated, DIN 580

zinc electroplated, DIN 582

R2 R1

R2

D

R1

L

H

H

D

S

S

d

Product code

Max. resist. kg

Dimensions d D S H R1 R2 L mm mm mm mm mm mm mm

pcs

pcs

580-M06 580-M08 580-M10 580-M12 580-M16 580-M20

140 140 230 340 700 1200

6 8 10 12 16 20

50 50 10 10 10 5

300 300 90 90 60 30

6 8 10 11 13 16

20 20 25 30 35 40

36 38 47 54 65 71

16 20 25 30 40 50

31 13 36 13 45 17 54 20.5 63 27 72 17

Product code

Max. resist. kg

d mm

D mm

582-M06 582-M08 582-M10 582-M12 582-M16 582-M20

140 140 230 340 700 1200

6 8 10 12 16 20

6 8 10 11 13 16

Dimensions S H R1 mm mm mm 20 20 25 30 35 40

36 38 47 54 65 71

16 20 25 30 40 50

R2 mm

pcs

pcs

31 36 45 54 63 72

50 50 10 10 10 5

300 300 90 90 60 30

www.koelner.pl

169


Screws, Nails, chains, ropes and ropes accessories TENSIONERS â&#x20AC;&#x201C; FORGED STEEL ZINC electroPLATED DIN 1480 Hook-Hook Max. resist. kg

Product code T-416-06110-HH T-416-08110-HH T-416-10125-HH T-416-12125-HH T-416-14140-HH T-416-16170-HH T-416-20200-HH

H2 H1

A

B

Dimensions H1 mm 86 77 86 80 135 112 132

75 140 220 310 430 600 915

H2 mm 110 110 120 120 170 170 200

A mm 76 88 109 118 140 145 170

B mm 66 73 85 90 105 115 132

pcs

pcs

10 10 10 5 5 5 1

250 150 100 50 40 25 15

hook-eye

T-416-06110-HO T-416-08110-HO T-416-10125-HO T-416-12125-HO T-416-14140-HO T-416-16170-HO T-416-20200-HO

D

H2 H1

A

B

eye-eye

H2 D

H1

A

B

Max. resist. kg

T-416-06110-OO T-416-08110-OO T-416-10125-OO T-416-12125-OO T-416-14140-OO T-416-16170-OO T-416-20200-OO

225 415 660 940 1300 1800 2750

H2 mm 110 110 120 120 170 170 200

A mm 76 88 109 118 140 145 170

B mm 66 73 85 90 105 115 132

D mm 9 10 14 16 18 22 24

B mm 66 73 85 90 105 115 132

D mm 9 10 14 16 18 22 24

pcs

pcs

10 10 10 5 5 5 1

250 150 100 50 40 25 15

pcs

pcs

10 10 10 5 5 5 1

250 150 100 50 40 26 15

Dimensions H1 mm 86 77 86 80 135 112 132

H2 mm 110 110 120 120 170 170 200

A mm 76 88 109 118 140 145 170

SPRING HOOKS DIN 689

zinc electroplated

zinc electroplated

B

B C

E

S1 L

H

D

D

L

L

E

D

B

H1 mm 86 77 86 80 135 112 132

75 140 220 310 430 600 915

Product code

ROPE PULLEYS WITH NYLON SHEAVES

Dimensions

Max. resist. kg

Product code

S

A1

Product code

Max. resist. kg

single pulley T-BL-105 T-BL-108 T-BL-112

double pulley T-BL-205 T-BL-208 T-BL-212

170

A2

A1

A2

Dimensions

A

A2 mm

B mm

D mm

E mm

L mm

pcs

pcs

600 900 1200

18 22 29

10 13 16

11 18 31

7 8 12

60 80 112

25 10 5

450 180 90

600 900 1200

42 52

10 13 16

11 18 31

7 8 12

60 80 112

25 10 5

450 180 90

Product code T-H-0250 T-H-0500 T-H-1000 T-H-1600 T-H-2500

Max. resist. kg 250 500 1000 1600 2500

A mm 54 72 98 118 145

B mm 28 36 48 60 65

C mm 12 16 20 26 32

Dimensions D H L mm mm mm 7.5 64 88 10 85 117 13.5 116 160 16 138 190 20 174 240

S mm 18 24 31 37 49

S1 mm 15 18 27 31 45

pcs

pcs

25 10 5 1 1

300 120 60 12 12


es

ec

d oo

W i

h

a

c

W

o

o

n

o

e g i

n d

h

oo

W

d n a

r t c e n n o c

o

o

d

c

o

n

n

e

c

s

o

to

rs

a

n

d

h

in

g

e

s

c

rs

to

ec

n on

n

e

d

s

d

W

s

r to

d

an

es

ng

hi

c

t

o

r

n

d

s

d

oo

W

n

g

e

c

n

s or

t

c ne

s

co

n on

nd

a

d

an

g in

h

s

hi

e ng


Wood connectors

D-ZK

MATERIAL

sheet steel, electro galvanized â&#x20AC;&#x201C; 8 Îźm

EQUAL LENGTH ANGLE BRACKET

1 made of galvanized steel sheet S 250 GD+Z 275 according to EN 10326:2005

2 nonlinear holes arrangement on the plane of connector is designed to improve performance strength

3 connector thickness from 2 to 5 mm

4 pressed reinforcing ribs enable making of connections exposed to high load capacities

5

172

Additional mounting holes with different diameters provide mounting versatility of connectors (hole diameter according to the size of connector).


Wood connectors ApprovalS

D-BP COILED STRAPPING MATERIAL: • sheet steel • electro galvanized – 8 μm

20

8

10

Type 1

7

3,5 7

Recommended load kN

-

-

1.1

0.8

-

-

-

3 3

20 20

10 25

3.5

1.1

0.8

2 4 4 4 5

25 40 40 40 60

25 25 25 50 50

-

-

-

3.5

1.1

0.8

3.7

1.2

0.9

1 1 1 1

12

12

Type 4

12

Type 3

1 1

5,3

1 1 1 1 1

60

3.5

20,3

10 10 25 25

40,6

12 20 20 25

+0,2 0

1 3 3 2

pcs.

Type 2

20

thickness: 0.8 mm D-BP-1210 D-BP-2010C D-BP-2025C D-BP-2525D thickness: 1.5 mm D-BP-2010B D-BP-2025B thickness: 2.0 mm D-BP-2525A D-BP-4010A D-BP-4025A D-BP-4050A D-BP-6050A

Design load kN

6,3

Product code

Characteristic Tape width Type m/coil load mm kN

20,3

16

90°

40,3

Type 5 ApprovalS

D-WB JOIST HANGERS MATERIAL: • sheet steel of thickness 2.0 mm • electro galvanized – 8 μm

Product code D-WB-411 D-WB-510 D-WB-516 D-WB-610 D-WB-613 D-WB-712 D-WB-812 D-WB-815 D-WB-818 D-WB-914 D-WB-1014 D-WB-1020

Dimensions B mm 40 50 50 60 60 70 80 80 80 90 100 100

H mm 110 105 165 100 130 125 120 150 180 145 140 200

kg

Holes per row

Number of holes ø 4.6

15.2 15.2 17.6 15.2 15.0 15.0 15.0 11.1 12.8 11.1 11.1 11.7

4 4 7 4 5 5 5 6 8 6 6 9

2×7 + 2×4 2×7 + 2×4 2×13 + 2×7 2×7 + 2×4 2×9 + 2×5 2×9 + 2×5 2×9 + 2×5 2×11 + 2×6 2×15 +2×8 2×11 + 2×6 2×11 + 2×6 2×17 + 2×9

Dimensions Number of s×X holes mm ø 10.8 2×50 1×50 1×50 1×50 1×60 2×60 2×60 1×60 2×60

2×1 2×1 2×3 2×1 2×2 2×2 2×2 2×2 2×3 2×2 2×2 2×3

Characteristic load kN

Design load kN

Recommended load kN

pcs.

9.6 9.6 18.8 17.7 14.2 18.0 18.0 20.5 28.9 28.9 35.3 47.6

3.0 3.0 5.9 5.5 4.4 5.6 5.6 6.4 9.0 9.0 11.0 14.9

2.1 2.1 4.2 3.9 3.1 4.0 4.0 4.6 6.4 6.4 7.9 10.6

50 50 40 50 40 40 40 25 25 25 25 20

www.koelner.pl

173


Wood connectors ApprovalS

D-WC JOIST HANGER WITH CONCEALED FLANGES MATERIAL: • sheet steel of thickness 2.0 mm • electro galvanized – 8 μm

Product code D-WC-411 D-WC-510 D-WC-610 D-WC-812 D-WC-815 D-WC-914 D-WC-1014

Dimensions B H mm mm 40 110 50 105 60 100 80 120 80 150 90 145 100 140

kg 13.0 13.0 13.0 15.0 11.1 11.1 11.1

Holes Number of holes per row ø 4.6 3 3 3 4 6 5 5

2×3 + 2×3 2×3 + 2×3 2×3 + 2×3 2×8 + 2×4 2×11 + 2×6 2×13 + 2×7 2×10 + 2×5

Dimensions s×X mm 1×50 1×60 1×60 1×60

Number of holes ø 12.8 2 4 4 4

Characteristic load kN 8.8 10.8 14.2 16.3 17.4 14.3 18.6

Design load kN 2.8 3.4 4.4 5.1 5.4 4.5 5.8

Recommended load kN 2.0 2.4 3.1 3.6 3.9 3.2 4.1

pcs. 50 50 50 40 25 25 25

ApprovalS

D-WD TWO-PIECE JOIST HANGER PLUS MATERIAL: • sheet steel of thickness 2.0 mm • electro galvanized – 8 μm

Product code D-WD-310 D-WD-312 D-WD-315

174

B mm 30 30 30

Dimensions

H mm 100 120 150

kg

Holes per row

7.5 9.0 10.4

3 4 5

Number of holes Characteristic load ø 4.6 kN 2×5 + 2×3 2×7 + 2×4 2×10 + 2×5

19.3 21.5 21.5

Design load kN 6.0 6.7 6.7

Recommended load kN 4.3 4.8 4.8

pcs. 25 25 25


Wood connectors ApprovalS

D-SP-LP RAFTER TWIST STRAPS MATERIAL: • sheet steel of thickness 2.0 mm • electro galvanized – 8 μm

Product code right D-SP-170P D-SP-210P D-SP-250P D-SP-290P D-SP-330P left D-SP-170L D-SP-210L D-SP-250L D-SP-290L D-SP-330L

H mm

Dimensions L B mm mm

C mm

170 210 250 290 330

30 30 30 30 40

115 155 180 220 260

170 210 250 290 330

30 30 30 30 40

115 155 180 220 260

kg

Holes per row

Number of holes ø 4.6

15 15 15 15 20

9.8 6.6 8.3 4.1 4.7

5 7 9 11 13

2×10 2×14 2×18 2×22 2×26

15 15 15 15 20

9.8 6.6 8.3 4.1 4.7

5 7 9 11 13

2×10 2×14 2×18 2×22 2×26

Characteristic load kN

21.5

21.5

Design load kN

6.7

6.7

Recommended load kN

pcs.

4.8

100 50 50 20 20

4.8

100 50 50 20 20

ApprovalS

D-SP UNIVERSAL RAFTER TWIST STRAPS MATERIAL: • sheet steel of thickness 2.0 mm • electro galvanized – 8 μm

Product code D-SP-170 D-SP-210 D-SP-250

Dimensions H mm 170 210 250

L mm 35 35 35

A mm 50 70 90

B C D kg mm mm mm 85 62.6 95.3 8.3 110 82.6 115.3 6.3 130 102.6 135.3 8.2

Number Characteristic Recommended Design load of holes load load kN pcs. ø 4.6 kN kN 4+6 6+8 8+10

19.3

6.0

4.3

100 50 50

www.koelner.pl

175


Wood connectors ApprovalS

D-LP STRAP TIES PLUS MATERIAL: • sheet steel of thickness 2.5 mm • electro galvanized – 8 μm

D-LP-310 D-LP-514

Product code D-LP-310 D-LP-418 D-LP-514 D-LP-618 D-LP-919

Dimensions L H mm mm 35 100 40 180 55 140 65 180 90 195

kg

D-LP-418

8 16 20 20 20

12

2 4 2 -

2 2

MATERIAL: • sheet steel of thickness 2.0 mm • electro galvanized – 8 μm

D-PP-410 D-PP-412 D-PP-416 D-PP-420 D-PP-430 D-PP-610 D-PP-612 D-PP-614 D-PP-616 D-PP-620 D-PP-624 D-PP-630 D-PP-816 D-PP-820 D-PP-824 D-PP-826 D-PP-830 D-PP-840 D-PP-1010 D-PP-1012 D-PP-1014 D-PP-1016 D-PP-1020 D-PP-1024 D-PP-1026 D-PP-1030 D-PP-1040 D-PP-1050 D-PP-1216 D-PP-1220 D-PP-1224 D-PP-1226 D-PP-1230 D-PP-1440

176

Dimensions L mm 40 40 40 40 40 60 60 60 60 60 60 60 80 80 80 80 80 80 100 100 100 100 100 100 100 100 100 100 120 120 120 120 120 140

H mm 100 120 160 200 300 100 120 140 160 200 240 300 160 200 240 260 300 400 100 120 140 160 200 240 260 300 400 500 160 200 240 260 300 400

kg 5.7 6.9 9.2 11.5 8.8 4.4 5.2 6.0 7.0 8.7 10.4 13.0 9.6 6.0 7.0 7.6 8.8 9.7 7.2 8.6 5.0 6.0 7.2 8.8 9.4 10.8 11.6 14.9 7.0 8.8 10.4 11.3 13.0 8.3

Recommended load kN

3.5

1.1

0.8

3.7

1.2

0.9

Holes Holes Number Characteristic Recommended Design load per row per row of holes load load kN pcs. n m ø 4.6 kN kN 2 2 2 2 2 3 3 3 3 3 3 3 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 7

pcs. 100 50 50 50 25

ApprovalS

D-PP TIE PLATES

Product code

D-LP-919

Design load kN

Number of holes Number of holes Number of holes Number of holes Characteristic load ø 4.6 ø 6.6 ø 10.4 ø 13.4 kN

5.5 6.7 6.9 9.6 8.6

D-LP-618

5 6 8 10 15 5 6 7 8 10 12 15 8 10 12 13 15 20 5 6 7 8 10 12 13 15 20 25 8 10 12 13 15 20

8 9 12 15 23 13 15 18 20 25 30 38 28 35 42 46 53 70 23 27 31 36 45 54 59 68 90 113 44 55 66 72 83 140

3.5

1.1

0.8

4.3

1.3

0.9

5.2

1.6

1.1

5.3

1.7

1.2

6.5

2.0

1.4

7.8

2.4

1.7

8.6

2.7

1.9

100 100 100 100 50 50 50 50 50 50 50 50 50 25 25 25 25 20 50 50 25 25 25 25 25 25 20 20 25 25 25 25 25 25


Wood connectors ApprovalS

D-LX PERFORATED ANGLE BRACKETS EXTREME MATERIAL: • sheet steel of thickness 4.0 mm • electro galvanized – 8 μm

Dimensions

Product code D-LX-434 D-LX-444

H mm 300 400

L mm 40 40

B mm 40 40

kg

Number of rows with holes n

9.8 12.7

15 20

Number of holes ø 4.6 23 30

Characteristic load kN

pcs. 25 25

4.5 (14.5)*

*) According to AT-15-6925/2006 ApprovalS

D-LA PERFORATED ANGLE BRACKETS PLUS MATERIAL: electro-zinc steel sheet– 8 μm

kg

40 40 40

40 40 40

3.4 4.9 6.4

10 15 20

15 23 30

14.5

4.5

3.2

25 25 25

40 40

40 40

4.6 6.1

10 15

15 23

14.5

4.5

3.2

25 25

G

B mm

20 B

L 12,3 17 17

L mm

10 20 20

H mm thickness: 2.0 mm D-LA-422 200 D-LA-432 300 D-LA-442 400 thickness: 3.0 mm D-LA-423 200 D-LA-433 300

Number of Number Characteristic Design Recommended rows with of holes load load load holes pcs. ø 4.6 kN kN kN n

25

Dimensions

Product code

H

n

4,6

4,6

26

ApprovalS

“T-SHAPED” STRAP TIES

MATERIAL: • sheet steel of thickness 2.0 mm • electro galvanized – 8 μm

Product code D-T-7050

H mm 50

Dimensions L B mm mm 70 16

kg 1.2

Number of holes ø 4.6 6

Characteristic load kN

Design load kN

3.5

1.1

Recommended load kN 0.8

pcs. 50

www.koelner.pl

177


Wood connectors AppRovALS

d-LWG strAP tIes PLUs MATERIAL: • sheet steel • electro galvanized – 8 μm

Dimensions H L mm mm thickness: 2.5 mm D-LWG-170 170 30 thickness: 4 mm D-LWG-195 195 35 Product code

Number of Number of Characteristic Recommended Design load holes holes load load kN pcs. ø 4.6 ø 6.6 kN kN

kg 5.0

5

-

3.5

1.1

0.8

50

10.2

-

7

3.5

1.1

0.8

50

D-LWG-170 D-LWG-170

D-LWG-195 D-LWG-195

AppRovALS

d-KB UneQUAL LenGtH AnGLe BrAcKets MATERIAL: • sheet steel • electro galvanized – 8 μm

D-KB-1280

D-KB-1075 Product code thickness: 2.5 mm D-KB-1075 thickness: 4.0 mm D-KB-1050 D-KB-1280 thickness: 5.0 mm D-KB-1812

178

D-KB-1812

D-KB-1050

H mm

Dimensions L mm

B mm

kg

Number of holes ø 4.6

100

75

30

5.0

3+2

-

100 120

50 80

50 35

8.8 4.1

-

180

120

40

11.2

-

Design load kN

Recommended load kN

pcs.

7.5

2.3

1.6

50

5+1 4+1

22.1 17.6

6.9 5.5

4.9 3.9

40 20

4+3

17.6

5.5

3.9

25

Number of holes Characteristic load ø 6.6 kN


Wood connectors ApprovalS

D-ZK EQUAL LENGTH ANGLE BRACKETS “L-SHAPED” MATERIAL: • sheet steel • electro galvanized – 8 μm

Dimensions Product code

H×H mm

Number Number Number Number Characteristic Design Recommendof holes of holes of holes of holes load load ed load L kg ø 4.6 ø 10.4 ø 12.8 ø 13.4 pcs. kN kN kN mm

Thickness: 2.5 mm D-ZK-553 50×50 35 8.2 4+4 D-ZK-70 70×70 55 6.9 10+10 D-ZK-90 90×90 65 9.7 8+6 Thickness: 3.0 mm D-ZK-60 60×60 45 5.0 6+6 D-ZK-994 90×90 40 8.0 8+8 D-ZK-105 105×105 90 9.3 15+14 Thickness: 2.0 mm reinforced with gusset D-ZK-70-WZ/2 70×70 55 6.9 6+6 D-ZK-90-WZ/2 90×90 65 9.7 10+10 D-ZK-105-WZ/2 105×105 90 9.3 14+12 Thickness: 2.5 mm reinforced with gusset D-ZK-70-WZ 70×70 55 6.9 6+6 D-ZK-90-WZ 90×90 65 9.7 10+10 D-ZK-105-WZ 105×105 90 9.3 14+12

1+1 1+1 -

2+3

-

12.5

3.9

2.8

14.7

4.6

3.3

150 50 50

1+1 2+2 -

-

2+3

14.7

4.6

3.3

50 50 25

1+1 -

1+1 -

1+3

14.7

4.6

3.3

50 50 25

1+1 -

1+1 -

1+3

14.7

4.6

3.3

50 50 25

D-ZK-70

D-ZK-994 D-ZK-90-WZ D-ZK-90

D-ZK-70-WZ D-ZK-105-WZ

D-ZK-105

ApprovalS

D-ZU UNIVERSAL ANGLE BRACKETS MATERIAL: • sheet steel of thickness 2.0 mm • electro galvanized – 8 μm

Product code D-ZU-3325 D-ZU-4425 D-ZU-5525 D-ZU-6625 D-ZU-5530 D-ZU-5730

Dimensions H×H L mm mm 30×30 25 40×40 25 50×50 25 60×60 25 50×50 30 50×70 30

kg 3.1 3.6 4.9 4.0 3.9 4.4

Number of holes ø 4.6 2+2 2+2 3+3 3+3 3+3 3+4

Characteristic load Design load kN kN

Recommended load kN

3.8

1.2

0.9

3.8

1.2

0.9

3.5

1.1

0.8

pcs. 200 200 200 100 100 100

www.koelner.pl

179


Wood connectors ApprovalS

D-MI EQUAL LENGTH ANGLE BRACKET – LIGHT MATERIAL: • sheet steel of thickness 2.0 mm • electro galvanized – 8 μm

Product code D-MI-2215 D-MI-3315 D-MI-4415 D-MI-5515 D-MI-6620 D-MI-8820 D-MI-1120

H×H mm 25 x25 30×30 40×40 50×50 60×60 80×80 100×100

Dimensions L mm 15 15 15 15 20 20 20

a

a mm 6 6 10 10 10 10 10

kg

Number of holes ø 4.6

Dimensions n×X

0.8 1.0 1.2 1.5 2.4 3.2 4.0

2×2 2×2 2×2 2×2 2×2 2×3 2×3

1×10 1×15 1×20 1×25 1×35 2×25 2×35

Characteristic load kN

Design load kN

Recommended load kN

2.5

0.8

0.6

5.5

1.7

1.2

pcs. 100 100 100 100 100 100 100

ApprovalS

D-MK EQUAL LENGTH ANGLE BRACKET – HEAVY MATERIAL: • sheet steel of thickness 5.0 mm • electro galvanized – 8 μm

L

Product code D-MK-085 D-MK-105 D-MK-125 D-MK-145 D-MK-165 D-MK-185

180

Dimensions H×H L mm mm 80×80 20 100×100 20 120×120 20 140×140 20 160×160 20 180×180 20

kg

Number of holes ø 6.6

Dimensions n×X

1.6 2.0 2.4 2.8 3.2 3.6

2×2 2×2 2×2 2×3 2×3 2×3

1×40 1×50 1×70 2×50 2×60 2×65

Characteristic load kN

Design load kN

Recommended load kN

11.3

3.5

2.5

4.5

1.4

1.0

pcs. 20 20 20 20 20 20


Wood connectors ApprovalS

D-KF, D-KP PERFORATED EQUAL LENGTH ANGLE BRACKETS MATERIAL: • sheet steel • electro galvanized – 8 μm

Product code thickness: 2.0 mm D-KF-442 D-KF-444 D-KF-446 D-KF-448 D-KF-4410 D-KF-4415 D-KF-554 D-KF-664 D-KF-665 D-KF-666 D-KF-668 D-KF-884 D-KF-886 D-KF-888 D-KF-114 D-KF-116 D-KF-118 D-KF-1110 D-KF-1114 thickness: 2.5 mm D-KP-444 D-KP-446 D-KP-448 D-KP-4410 D-KP-664 D-KP-665 D-KP-666 D-KP-668 D-KP-6610 D-KP-884 D-KP-886 D-KP-888 D-KP-8810 D-KP-114 D-KP-116 D-KP-118 D-KP-1110

Dimensions H×H L mm mm

kg

Holes per row n

Number of rows with holes m

Number of holes ø 4.6

42×42 40×40 40×40 40×40 40×40 40×40 52×52 60×60 60×60 60×60 60×60 80×80 80×80 80×80 100×100 100×100 100×100 100×100 100×100

20 40 60 80 100 150 40 40 50 60 80 40 60 80 40 60 80 100 140

3.1 4.2 6.5 9.8 5.3 7.9 5.7 6.9 4.2 4.9 7.4 5.0 6.6 4.4 6.2 8.5 5.7 7.3 8.5

1 2 3 4 5 8 1 2 3 3 4 2 3 4 2 3 4 5 7

2 2 2 2 2 2 2 3 3 3 3 4 4 4 5 5 5 5 5

2×2 2×3 2×5 2×7 2×9 2×15 2×4 2×5 2×8 2×8 2×11 2×6 2×10 2×14 2×8 2×13 2×18 2×23 2×33

40×40 40×40 40×40 40×40 60×60 60×60 60×60 60×60 60×60 80×80 80×80 80×80 80×80 100×100 100×100 100×100 100×100

40 60 80 100 40 50 60 80 100 40 60 80 100 40 60 80 100

5.2 8.1 12.3 6.6 8.6 5.2 6.1 9.3 10.3 6.3 8.3 5.5 7.7 7.8 10.6 7.1 9.1

2 3 4 5 2 3 3 4 5 2 3 4 5 2 3 4 5

2 2 2 2 3 3 3 3 3 4 4 4 4 5 5 5 5

2×3 2×5 2×7 2×9 2×5 2×8 2×8 2×11 2×14 2×6 2×10 2×14 2×18 2×8 2×13 2×18 2×23

Characteristic load Design load kN kN

Recommended load kN

-

-

-

3.9

1.2

0.9

-

-

-

3.9

1.2

0.9

16.3

5.1

3.6

8.1

2.5

1.8

3.9

1.2

0.9

24.5

7.7

5.5

16.3

5.1

3.6

8.1

2.5

1.8

www.koelner.pl

pcs. 100 100 100 100 50 50 100 100 50 50 50 50 50 25 50 50 25 25 20 100 100 100 50 100 50 50 50 50 50 50 25 25 50 50 25 25

181


Wood connectors ApprovalS

D-ZN UNEQUAL LENGTH ANGLE BRACKETS PLUS B

G

H

MATERIAL: • sheet steel of thickness 2.5 mm • electro galvanized – 8 μm

B

L

L

Product code D-ZN-4124 D-ZN-4164 D-ZN-4904 D-ZN-5905 D-ZN-6356 D-ZN-6906 D-ZN-8604 D-ZN-9124

H mm 40 40 40 50 60 60 80 90

Dimensions L mm 120 160 90 90 35 90 60 120

B mm 40 40 40 50 60 60 40 40

kg

Number of holes ø 4.6

12.2 8.5 9.2 10.2 9.0 6.2 6.4 8.6

3+9 3+12 3+9 5+10 5+8 8+12 6+5 8+9

Characteristic load kN

Design load kN

Recommended load kN

14.5

4.5

3.2

3.9

1.2

0.9

-

-

-

pcs. 100 50 100 100 100 50 50 50

reinforced* reinforced* reinforced* -

*) reinforced with gusset

ApprovalS

D-ZS EQUAL LENGTH BRACKETS 135° PLUS MATERIAL: • sheet steel of thickness 2.5 mm • electro galvanized – 8 μm

Product code D-ZS-553 D-ZS-994 D-ZS-996 D-ZS-119

182

Dimensions H×H L mm mm 50×50 35 90×90 40 90×90 65 105×105 90

kg 3.4 8.0 9.7 7.9

Number of holes ø 4.6 8 16 20 20

Number of holes ø 6.6 12

Number of holes ø 10.4 2 4 -

Number of holes ø 13.4 2 2

Characteristic load kN

pcs.

-

50 50 50 25


Wood connectors ApprovalS

D-ZKR ADJUSTABLE ANGLE BRACKET MATERIAL: • sheet steel • electro galvanized – 8 μm

6

12

6

12

5 4, 5 4,

D-ZKR-636 D-ZKR-646 D-ZKR-862

H mm 60 60 80

Dimensions L B mm mm 30 60 40 60 65 20

kg 3.1 5.0 3.9

Number Number Characteristic load Design load of holes of holes kN kN ø 4.6 ø 6.6 20+7 7+5 3.8 1.1 2

Recommended load kN 0.8

pcs.

10,5

50 50 50

38

L L

10,5 38

10,510,5

Product code

G G

H H

12 12

6

6

D-ZKR-646

D-ZKR-636

38 38 B B

D-I ANCHOR NAILS

ApprovalS

NAILS MADE ACCORDING TO PN-EN-10230-1

MATERIAL: • sheet steel • electro galvanized – 8 μm

Product code D-I-440 D-I-450 D-I-460 D-I-475 D-I-4100 D-I-4125

L mm 40 50 60 75 100 125

D-ED TWO-SIDED SPIKED PLATE MATERIAL: • sheet steel • electro galvanized – 12 μm

Dimensions L1 mm 28 34 39 56 61 85

øD mm 4.35 4.35 4.35 4.35 4.35 4.35

kg 1 1 1 1 1 1

Product code D-ED-48 D-ED-62 D-ED-75

D mm 48 62 75

Dimensions d mm 22 22 22

G mm 1 1.2 1.2

kg 2.1 3.3 4.9

www.koelner.pl

pcs. 300 100 100

183


Wood connectors AppRovALS

d-Kn „L” sHAPed strAP tIes MATERIAL: • sheet steel • electro galvanized – 8 μm

L mm 50 60 75 100 150 200 250 300

Product code D-KN-50 D-KN-60 D-KN-75 D-KN-100 D-KN-150 D-KN-200 D-KN-250 D-KN-300

B mm 10 10 17 19 25 31 31 41

G mm 2 2 2 2 2.5 3 3 4

Dimensions

d-Ms AnGLe connector WIde tYPe MATERIAL: • sheet steel of thickness 2.0 mm • electro galvanized – 8 μm

Product code D-MS-333 D-MS-444 D-MS-666

184

H mm 30 40 60

a mm 6 7 9 7 25 19 15 20

b mm 24 27 36 42 80 62 91 105

c mm 42.5 60.0 91.0 105.0

kg 1.30 1.60 2.50 4.20 7.00 13.10 8.35 17.90

pcs. 100 100 100 100 50 50 25 25

d-Pd BAtten rooFInG strUt MATERIAL: • sheet steel of thickness 2. mm • electro galvanized – 8 μm

Dimensions L mm 30 40 60

B mm 30 40 60

kg

pcs.

2.7 4.9 5.6

100 100 50

Product code D-PD-210 D-PD-260

H mm 210 260

Dimensions L D mm mm 50 55 50 55

G mm 7.0 7.5

kg 10 10


Wood connectors D-TB POST BASE WITH BASEPLATE MATERIAL: • grip: sheet steel of thickness 2.0 mm • base: sheet steel of thickness 5.0 mm • electro galvanized

Product code D-TB-71 D-TB-81 D-TB-91 D-TB-101

B×B mm 71×71 81×81 91×91 101×101

Dimensions H mm 100 100 100 100

L×L mm 170×170 170×170 170×170 170×170

kg

Characteristic load kN

Design load kN

Recommended load kN

1.03 1.21 1.43 1.60

11.1 5.4 7.7 -

3.5 1.7 2.4 -

2.5 1.2 1.7 -

d-tc post base with rod

“U” SHAPE MATERIAL: • sheet steel of thickness 5.0 mm • electro galvanized

MATERIAL: • grip: sheet steel of thickness 5.0 mm • rod: steel of diameter 18 / 20 mm • electro galvanized

Dimensions S H L mm mm mm D-TC-716 71 100 200 D-TC-816 81 100 200 D-TC-916 91 100 200 D-TC-1016 101 100 200 D-TC-1116 111 100 200 D-TC-1216 121 100 200 D-TC-1416 141 100 200 Product code

Product code D-TU-81 D-TU-91 D-TU-101 D-TU-121

S mm 81 91 101 121

Dimensions H mm 150 150 150 150

B mm 60 60 60 60

Characteristic Design Recommended load load load kN kN kN 1.06 7.8 2.4 1.7 1.08 7.4 2.3 1.6 1.10 1.12 3.0 0.9 0.6 1.16 5.5 1.7 1.2 1.24 1.42

ø mm kg 20 20 20 18 18 18 18

www.koelner.pl

185


Wood connectors D-TCR post base with adjustable rod

D-TD HAMMER IN POST BASE 17,5 17,5

25

MATERIAL: • grip: sheet steel of thickness 5.0 mm • rod: steel of diameter 18 / 20 mm • electro galvanized

5

10

17,5 S

82

L

H

25

11

MATERIAL: • sheet steel of thickness 2.0 mm • electro galvanized

Product code D-TCR

S mm 60-136

Dimensions H mm 130

L mm 200

ø mm

kg

19

1.10

D-TL POST BASE WITH REBAR

Product code D-TD-7175 D-TD-9175 D-TD-1075 D-TD-1090 D-TD-1290

FOR INSTALLATION IN CONCRETE – L-SHAPED MATERIAL: • grip: sheet steel of thickness 5.0 mm • rod: steel of diameter 20 mm • electro galvanized

Dimensions B×B L mm mm 70×70 750 90×90 750 100×100 750 100×100 900 120×120 900

kg 13.2 13.3 14.3 14.3 14.3

Characteristic Design Recommended load load load kN kN kN 11.1 3.5 2.5 5.4

1.7

1.2

D-OP PERGOLA BRACKET MATERIAL: • sheet steel of thickness 2.0 mm • electro galvanized – 8 μm

Product code D-TL-808

H mm 100

L mm 200

Dimensions

B mm 65

S mm 80

D-TA POST BASE WITH REBAR FOR INSTALLATION IN CONCRETE – I-SHAPED MATERIAL: • grip: sheet steel of thickness 5.0 mm • rod: steel of diameter 20 mm • electro galvanized

Product code D-TA-200

186

H mm 100

L mm 200

Dimensions

B mm 78

s mm 80

Product code D-OP-333

Dimensions H L B kg mm mm mm 37 31 30 1.8

Characteristic Design Recommended load load load kN kN kN 7.7

2.4

1.7

pcs. 50


hinges LOCKING HINGE

Product code D-ZA-105

mm 100×50×100×3.0

LOCKING GATE HINGE

pcs. 10

D-Z-25 D-Z-30 D-Z-35 D-Z-40 D-Z-50 D-Z-60 D-Z-70 D-Z-90

D-ZB-209 D-ZB-259

mm 200×95×2.5 250×95×2.5

pcs. 10 10

CONSTRUCTION HINGE

BUTT HINGE

Product code

Product code

mm 25×40×1 30×40×1 35×40×1 40×40×1 50×40×1 60×40×1 70×40×1 90×90×3

pcs. 100 100 100 100 100 100 100 10

Product code D-ZD-1025 D-ZD-1035 D-ZD-1050 D-ZD-1550 D-ZD-2050

mm 100×25×2.5 100×35×2.5 100×50×2.5 150×50×2.5 200×50×2.5

www.koelner.pl

pcs. 30 30 30 30 30

187


188


e g n a r

D Y I

e

D

g n

e

a r

g

Y

n

I

a

r

Y DI

Y

e g n

I

a r

Y

D

I D

e g n a

r

I

Y

D

D

I

Y

r

a

n

g

e

e

r

g an

D

I

Y

r

a

n

g

e


DIY range UNO UNIVERSAL EXPANSION PLUGS

Frame fixings – nylon

with countersunk head screws – nylon Product code Product code B-UNO/05+/N B-UNO/06+/N B-UNO/08+/N B-UNO/10+/N

mm 5 6 8 10

mm 4.0×35 4.5×40 5.0×50 6.0×50

pcs. 15 10 6 4

Outer 16 16 16 16

EAN 13 code 5906675137872 5906675137889 5906675137896 5906675137902

with coachscrew – nylon

mm Ø8×60 Ø8×80 Ø8×100 Ø8×120 Ø10×80 Ø10×100 Ø10×120

B-FF-08060N B-FF-08080N B-FF-08100N B-FF-08120N B-FF-10080N B-FF-10100N B-FF-10120N

pcs. 6 6 6 4 4 4 4

Outer 12 12 12 12 12 12 12

EAN 13 code 5906675138008 5906675138015 5906675138022 5906675138039 5906675138046 5906675138053 5906675138060

nylon Frame fixings with angle hook

Product code B-UNO/08/550/N B-UNO/10/660/N

mm 8 10

mm 5.0×50 6.0×60

pcs. 5 3

Outer 16 16

EAN 13 code 5906675137919 5906675137926

Product code skin packed B-FF-10135NK B-FF-10160NK

with angle hook – nylon

mm

pcs.

Outer

EAN 13 code

Ø10×135 Ø10×160

2 2

12 12

5906675168197 5906675168210

Outer 6 6 6 6 6

EAN 13 code 5906675001913 5906675001920 5906675001937 5906675001944 5906675001951

Outer 6 6 6 6 6 6 6 6 6

EAN 13 code 5906675002002 5906675002019 5906675002026 5906675002033 5906675002040 5906675002064 5906675002071 5906675002088 5906675002057

Drywall screws for steel Product code B-UNO/05K/N B-UNO/06K/N B-UNO/08K/N B-UNO/10K/N

mm 5 6 8 10

mm M35 M45 M50 M60

pcs. 15 8 4 3

Outer 16 16 16 16

EAN 13 code 5906675137933 5906675137940 5906675137957 5906675137964

with round hook – nylon

Product code B-RL-3525S B-RL-3535S B-RL-3545S B-RL-3555S B-RL-4270S

mm 3.5×25 3.5×35 3.5×45 3.5×55 4.2×70

pcs. 200 200 100 50 50

Drywall screws for timber

Product code B-UNO/06S/N B-UNO/08S/N B-UNO/10S/N

190

mm 6 8 10

mm M45 M50 M60

pcs. 6 4 3

Outer 16 16 16

EAN 13 code 5906675137971 5906675137988 5906675137995

Product code B-RL-3525T B-RL-3535T B-RL-3545T B-RL-3555T B-RL-4270T B-RL-48100T B-RL-48110T B-RL-48120T B-RL-4890T

mm 3.5×25 3.5×35 3.5×45 3.5×55 4.2×70 4.8×100 4.8×110 4.8×120 4.8×90

pcs. 200 200 100 50 50 25 25 25 25


DIY range nYLOn SeLF DrILL

DrYwaLL ScrewS SeLF DrILLIng

Product code B-RL-3525SD B-RL-3535SD B-RL-3545SD B-RL-3911SD

mm 3.5×25 3.5×35 3.5×45 3.9×11

pcs. 200 200 100 200

Outer 6 6 6 12

EAN 13 code 5906675002095 5906675002101 5906675002118 5906675002125

hammer FIXIngS – nYLOn

Product code B-RL-DR-01KW poly bag B-RL-DRA-01W

mm Ø14

pcs. 8

Outer 16

EAN 13 code 5906675138152

Ø14

50

12

5906675168371

Outer 16

EAN 13 code 5906675138169

nYLOn SeLF DrILL with panhead screw

Product code countersunk B-FX-N-05L030 B-FX-N-05L040 B-FX-N-06L050 B-FX-N-06L060 B-FX-N-08L045 B-FX-N-08L060 B-FX-N-08L080 B-FX-N-08L100 B-FX-N-08L120 with flange B-FX-N-06K040 B-FX-N-06K060 B-FX-N-06K080 with cylinder head B-FX-N-06C035 skin packed B-FX-08L160 B-FX-10L140

mm

pcs.

Outer

EAN 13 code

Ø5×30 Ø5×40 Ø6×50 Ø6×60 Ø8×45 Ø8×60 Ø8×80 Ø8×100 Ø8×120

20 18 12 12 12 8 6 5 4

12 12 12 12 12 12 12 12 12

5906675138077 5906675168296 5906675138091 5906675168319 5906675138121 5906675138138 5906675138145 5906675168234 5906675168258

Ø6×40 Ø6×60 Ø6×80

15 12 10

12 12 12

5906675138084 5906675138107 5906675138114

Ø6×35

15

12

5906675168272

Ø8×160 Ø10×140

2 2

12 12

5906675168333 5906675168357

rawLnUt FLeXI-PLUg

Product code B-RL-RNT-4/24S B-RL-RNT-5/26S

mm Ø8 Ø10

mm 4.0×30 5.0×30

pcs. 5 5

B-TAP-50S

mm Ø5

mm 4.5×40

pcs. 10

B-RL-DR-01S

mm Ø14

mm 3,9×32

pcs. 6

PLaSterbOarD PLUgS

Product code B-RLPB B-RLPBK

mm Ø5 Ø5

mm 4.5×45 M45

pcs. 10 10

Outer 16 16

EAN 13 code 5906675168531 5906675168555

InterSetS

Outer 16 16

EAN 13 code 5906675138183 5906675138190

Outer 16

EAN 13 code 5906675138176

taP-In

Product code

Product code

Product code with slotted screw B-RLSM-04020 B-RLSM-04032 B-RLSM-04046 B-RLSM-05037 B-RLSM-05052 with angle hook B-RLSM-04032K with round hook B-RLSM-04032S

pcs.

Outer

EAN 13 code

5 5 3 3 3

16 16 16 16 16

5906675168395 5906675168418 5906675168470 5906675168494 5906675168517

3

16

5906675168432

3

16

5906675168456

www.koelner.pl

191


DIY range SELF-DRILLING SCREWS

with EPDM washers for fixings sheet metal to steel construction z/p

Product code B-RLOC-48016T B-RLOC-48019T B-RLOC-48022T B-RLOC-55025T B-RLOC-55038T B-RLOC-55045T B-RLOC-55055T

mm 4.8×16 4.8×19 4.8×22 5.5×25 5.5×38 5.5×45 5.5×55

pcs. 20 20 20 15 15 15 15

Outer 8 8 8 8 8 8 8

EAN 13 code 5906675165967 5906675165981 5906675166001 5906675166025 5906675166049 5906675166063 5906675166087

Wafer head screws

SELF-DRILLING SCREWS

with EPDM washers for fixings sheet metal to timber construction z/p

Product code B-RLOD-48035T3009 B-RLOD-48035T6003 B-RLOD-48035T8004 B-RLOD-48035T8017 B-RLOD-48035T9010 B-RLOD-48028T B-RLOD-48035T

Farbe

mm pcs. Outer 4.8×35 20 8 4.8×35 20 8 4.8×35 20 8 4.8×35 20 8 4.8×35 20 8 4.8×28 20 8 4.8×35 20 8

brown olive light brown dark brown white zinc plated zinc plated

EAN 13 code 5906675166148 5906675166162 5906675166186 5906675166209 5906675166223 5906675167787 5906675166124

Wafer head self drilling screws

electro zinc plated

zinc electroplated

Product code B-RLWF-4213 B-RLWF-4216 B-RLWF-4219 B-RLWF-4222 B-RLWF-4225

pcs. 35 30 26 24 21

Outer 16 16 16 16 16

EAN 13 code 5906675165226 5906675165240 5906675165264 5906675165288 5906675165301

Product code B-RLWFS-4213 B-RLWFS-4216 B-RLWFS-4219 B-RLWFS-4222 B-RLWFS-4225

mm 4.2×13 4.2×16 4.2×19 4.2×22 4.2×25

pcs. 28 26 22 22 20

Outer 16 16 16 16 16

Window fitting screws

Self-drilling window screws

with countersunk head with selftapping coarse thread zinc-plated

with countersunk head with selftapping fine thread zinc-plated

Product code B-RLKR-4016 B-RLKR-4019 B-RLKR-4022 B-RLKR-4030 B-RLKR-4035

192

mm 4.2×13 4.2×16 4.2×19 4.2×22 4.2×25

mm 4.0×16 4.0×19 4.0×22 4.0×30 4.0×35

pcs. 45 40 30 30 25

Outer 16 16 16 16 16

EAN 13 code 5906675165622 5906675165646 5906675165660 5906675165684 5906675165707

Product code B-RLKS-3913 B-RLKS-3916 B-RLKS-3919 B-RLKS-3925 B-RLKS-3938

mm 3.9×13 3.9×16 3.9×19 3.9×25 3.9×38

pcs. 70 60 40 25 22

Outer 16 16 16 16 16

EAN 13 code 5906675165325 5906675165349 5906675165363 5906675165387 5906675165400

EAN 13 code 5906675165523 5906675165547 5906675165561 5906675165585 5906675165608


DIY range harDeneD chIPbOarD ScrewS “PremIUm”

DecKIng ScrewS

with countersunk head zinc plated

Product code B-RL-2516 B-RL-3012 B-RL-S3016 B-RL-S3020 B-RL-S3025 B-RL-S3030 B-RL-S3040 B-RL-S3516 B-RL-S3520 B-RL-S3525 B-RL-S3530 B-RL-S3540 B-RL-S3550 B-RL-S4016 B-RL-S4020 B-RL-S4025 B-RL-S4030 B-RL-S4040 B-RL-S4050 B-RL-S4060 B-RL-S4070 B-RL-S5025 B-RL-S5030 B-RL-S5040 B-RL-S5050 B-RL-S5060 B-RL-S5070 B-RL-S5080 B-RL-S5100 B-RL-S6030 B-RL-S6040 B-RL-S6050 B-RL-S6060 B-RL-S6070 B-RL-S6080 B-RL-S6100

mm 2.5×16 3.0×12 3.0×16 3.0×20 3.0×25 3.0×30 3.0×40 3.5×16 3.5×20 3.5×25 3.5×30 3.5×40 3.5×50 4.0×16 4.0×20 4.0×25 4.0×30 4.0×40 4.0×50 4.0×60 4.0×70 5.0×25 5.0×30 5.0×40 5.0×50 5.0×60 5.0×70 5.0×80 5.0×100 6.0×30 6.0×40 6.0×50 6.0×60 6.0×70 6.0×80 6.0×100

pcs. 90 75 65 55 50 40 30 50 45 40 35 25 25 40 40 30 30 20 20 15 15 20 18 15 12 10 8 8 6 12 10 8 7 6 4 3

Outer 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 12 16 16 16 16 16 12 12 12 16 16 16 16 12 12 12

EAN 13 code 5906675165721 5906675165745 5906675138589 5906675138596 5906675138602 5906675138619 5906675138206 5906675138213 5906675138220 5906675138237 5906675138244 5906675138251 5906675138268 5906675138275 5906675138282 5906675138299 5906675138305 5906675138312 5906675138329 5906675138336 5906675138343 5906675138350 5906675138367 5906675138374 5906675138381 5906675138398 5906675138404 5906675138411 5906675138428 5906675138435 5906675138442 5906675138459 5906675138466 5906675138473 5906675138480 5906675138497

Product code B-DS-4050 B-DS-4060 B-DS-5050 B-DS-5060 B-DS-5080

mm 4.0×50 4.0×60 5.0×50 5.0×60 5.0×80

pcs. 120 100 100 80 60

Outer 6 6 6 6 6

EAN 13 code 5906675168654 5906675168678 5906675168692 5906675168715 5906675168739

Outer 16 16 16 16

EAN 13 code 5906675171418 5906675171432 5906675171456 5906675171470

FIttIng Screw

Product code B-T-WMP-0416 B-T-WMP-0422 B-T-WMP-0428 B-T-WMP-0435

mm 4.0×16 4.0×22 4.0×28 4.0×35

pcs. 20 16 14 12

Pan heaD SeLF-taPPIng ScrewS for sheet metal with cross head din 7981

Product code B-RL-29130ZN B-RL-29160ZN B-RL-35190ZN B-RL-42250ZN B-RL-42320ZN

mm 2.9×13 2.9×16 3.5×19 4.2×25 4.2×32

pcs. 18 15 12 10 8

Outer 16 16 16 16 16

www.koelner.pl

EAN 13 code 5906675165424 5906675165448 5906675165462 5906675165486 5906675165509

193


DIY range R-KEM+ STYRENE FREE POLYESTER RESIN

R-KEM+ STYRENE FREE POLYESTER RESIN

WITH STUDS AND SLEEVES

Product code B-RL-KEM-300

EAN 13 code Cartridge 300 ml, 2 noozles in poly bag

B-RL-KEM-300-ZE6

Cartridge 300 ml, 6 plastic sleeves 13×130, 6 washers, 6 nuts, 6 studs 10×160, 2 noozles

EAN 13 code 5906675234878

R-KEM+ STYRENE FREE POLYESTER RESIN

R-KEM+ STYRENE FREE POLYESTER RESIN

WITH GUN and nozzles

WITH gun and nozzles

Product code B-RL-KEM-300-ZE B-RL-KEM-300-ZE/N

194

5906675206677

Product code

EAN 13 code

Cartridge 300 ml, 2 noozles, mastic gun in poly bag

5906675206684

Duodisplay box with 12×cartridge 300 ml, 2 noozles, mastic gun in poly bag

5906675224039

Product code Cartridge 300 ml, 2 noozles, B-RL-KEM-300-P mastic gun

pcs

Outer

EAN 13 code

1

4

5906675293301


DIY range Universal Expansion Plugs

Universal Expansion Plugs with Angle Hook

Product code B-KS-06 B-KS-08 B-KS-10

mm 6 8 10

mm 40 50 60

pcs. 12 6 4

Outer 16 16 16

EAN 13 code 5906675017693 5906675017891 5906675018096

BLISTER PACK Product code B-KS-06K B-KS-08K

mm 6 8

mm 40 50

mm 4.0×50 5.0×65

pcs. 4 4

Outer 16 8

EAN 13 code 5906675087092 5906675087191

mm 6 8

mm 40 50

mm 4.0×50 5.0×65

pcs. 20 20

pcs. 12 12

EAN 13 code 5906675087185 5906675087184

MEGA PACK Product code B-SL-KS-06K B-SL-KS-08K

Universal Expansion Plugs

Universal Expansion Plugs

with Countersunk Head Screw

with Round Hook

BLISTER PACK Product code B-KS-06040 B-KS-06060 B-KS-08050 B-KS-08060 B-KS-10060 B-KS-10080

BLISTER PACK mm 6 6 8 8 10 10

mm 40 40 50 50 60 60

mm 4.0×40 4.0×60 5.0×50 5.0×60 6.0×60 6.0×80

pcs. 12 10 8 8 6 4

Outer 8 8 8 8 12 12

EAN 13 code 5906675084299 5906675084695 5906675084893 5906675085098 5906675085494 5906675085890

Product code B-KS-06S B-KS-08S

Product code

Product code

B-SL-KS-06S B-SL-KS-08S

mm 6 8 10

mm 40 50 60

mm 4.0×60 5.0×60 6.0×60

pcs. 50 50 20

pcs. 12 12 12

EAN 13 code 5906675846880 5906675850818 5906675854885

mm 40 50

mm 4.0×65 5.0×85

pcs. 4 4

Outer 16 12

EAN 13 code 5906675087597 5906675087696

MEGA PACK

MEGA PACK

B-SL-KS-06060 B-SL-KS-08060 B-SL-KS-10060

mm 6 8

mm 6 8

mm 40 50

mm 4.0×65 5.0×85

pcs. 20 20

pcs. 12 12

www.koelner.pl

EAN 13 code 5906675087580 5906675087689

195


DIY range Expansion Plugs

Expansion Plugs with Angle Hook

BLISTER PACK Product code B-FIX-K05 B-FIX-K06 B-FIX-K08 B-FIX-K10 B-FIX-K12

BLISTER PACK mm 5 6 8 10 12

mm 25 30 40 50 60

pcs. 30 30 16 10 6

Outer 12 12 12 12 12

EAN 13 code 5906675080093 5906675080796 5906675080895 5906675080598 5906675080697

mm 6 8 10

mm 30 40 50

pcs. 200 100 50

pcs. 12 12 12

EAN 13 code 5906675080383 5906675080482 5906675080581

MEGA PACK Product code B-SL-FIX-K06 B-SL-FIX-K08 B-SL-FIX-K10

Product code B-FIX-06K B-FIX-08K B-FIX-10K B-FIX-12K

mm 6 8 10 12

mm 30 40 50 60

mm 4.3×35 5.0×50 6.0×55 8.0×65

pcs. 6 4 4 3

Outer 16 16 12 12

EAN 13 code 5906675083490 5906675083599 5906675082097 5906675083094

mm 6 8 10

mm 30 40 50

mm 4.3×35 5.0×50 6.0×55

pcs. 50 50 25

pcs. 12 12 12

EAN 13 code 5906675083483 5906675083582 5906675083681

Outer 12 12 12 12 12 12 12 12

EAN 13 code 5906675160191 5906675160290 5906675160399 5906675160498 5906675160894 5906675160993 5906675161297 5906675161396

pcs. 12 12 12 12 12 12 12

EAN 13 code 5906675160184 5906675160283 5906675160382 5906675160481 5906675160887 5906675160986 5906675161280

MEGA PACK Product code B-SL-FIX-06K B-SL-FIX-08K B-SL-FIX-10K

Expansion Plugs

Expansion Plugs

with Countersunk head Screw

with Coachscrew

BLISTER PACK Product code B-FIX-05+ B-FIX-06+ B-FIX-06+435 B-FIX-06+450 B-FIX-08+ B-FIX-08+460 B-FIX-08+550 B-FIX-10+560 B-FIX-10+660 B-FIX-10+680

mm 5 6 6 6 8 8 8 10 10 10

mm 25 30 30 30 40 40 40 50 50 50

mm 3.5×30 3.5×30 4.0×35 4.0×50 4.0×45 4.5×60 5.0×50 5.0×60 6.0×60 6.0×80

pcs. 15 12 10 8 6 6 4 8 6 4

Outer 16 16 16 16 16 16 16 12 12 12

EAN 13 code 5906675082998 5906675150598 5906675082790 5906675081694 5906675081793 5906675081892 5906675082493 5906675182599 5906675081595 5906675082899

MEGA PACK Product code B-SL-FIX-05+ B-SL-FIX-06+ B-SL-FIX-06+435 B-SL-FIX-06+450 B-SL-FIX-08+ B-SL-FIX-08+460 B-SL-FIX-08+550 B-SL-FIX-10+560 B-SL-FIX-10+660 B-SL-FIX-10+680

196

BLISTER PACK Product code B-FIX-10/660 B-FIX-10/680 B-FIX-10/100 B-FIX-10/120 B-FIX-12/60 B-FIX-12/80 B-FIX-12/100 B-FIX-12/120

mm 10 10 10 10 12 12 12 12

mm 50 50 50 50 60 60 60 60

mm 6.0×60 6.0×80 6.0×100 6.0×120 8.0×60 8.0×80 8.0×100 8.0×120

pcs. 5 4 4 3 3 3 2 2

MEGA PACK mm 5 6 6 6 8 8 8 10 10 10

mm 25 30 30 30 40 40 40 50 50 50

mm 3.5×30 3.5×30 4.0×35 4.0×50 4.0×45 4.5×60 5.0×60 5.0×60 6.0×60 6.0×80

pcs. 100 100 100 100 100 100 100 50 50 50

pcs. 12 12 12 12 12 12 12 12 12 12

EAN 13 code 5906675082981 5906675150581 5906675081380 5906675081687 5906675082684 5906675081885 5906675082486 5906675182582 5906675081588 5906675082882

Product code B-SL-FIX-10/660 B-SL-FIX-10/680 B-SL-FIX-10/100 B-SL-FIX-10/120 B-SL-FIX-12/60 B-SL-FIX-12/80 B-SL-FIX-12/100

mm 10 10 10 10 12 12 12

mm 50 50 50 50 60 60 60

mm 6.0×60 6.0×80 6.0×100 6.0×120 8.0×80 8.0 x100 8.0 x120

pcs. 25 25 25 15 15 15 15


DIY range Expansion Plugs

Expansion PlugS

with Round Hook

with Pig Tail Hook

Product code

BLISTER PACK Product code B-FIX-06S B-FIX-08S B-FIX-10S

B-FIX-12H mm 6 8 10

mm 30 40 50

mm 4.5×50 5.0×65 6.0×85

pcs. 6 4 4

Outer 16 16 12

EAN 13 code 5906675083698 5906675083797 5906675083896

mm 6 8 10

mm 30 40 50

mm 3.5×40 4.0×45 6.0×50

pcs. 50 50 25

pcs. 12 12 12

EAN 13 code 5906675085289 5906675083780 5906675083889

mm 12

mm 60

mm 8.0×130

pcs. 1

Outer 12

EAN 13 code 5906675083995

set 1

Outer 12

EAN 13 code 5906675080192

set 1

Outer 12

EAN 13 code 5906675080291

set 1

Outer 12

5906675080390

WC Fixing Set

MEGA PACK Product code B-SL-FIX-06S B-SL-FIX-08S B-SL-FIX-10S

with white masking cap Product code B-KPM100

Washbasin Fixing SeT

mm 10

mm 50

mm 6.0×80

with silver glossy masking cap Product code B-KPM100S

mm 10

mm 50

mm 6.0×80

with golden masking cap Product code

with white masking cap Product code B-KPU100 B-KPU120 B-KPU140 B-KPU141

mm 10 12 12 14

mm 50 60 60 70

B-KPM100Z

mm 8.0×80 8.0×100 8.0×120 10.0×140

set 1 1 1 1

Outer 6 6 6 6

EAN 13 code 5906675081199 5906675081298 5906675081397 5906675081496

set 1 1 1

Outer 6 6 6

EAN 13 code 5906675082196 5906675082295 5906675082394

mm 10

mm 50

mm 6.0×80

EAN 13 code

Stair Tread Fixings for Concrete

with silver glossy masking cap Product code B-KPU100S B-KPU120S B-KPU140S

mm 10 12 12

mm 50 60 60

mm 8.0×80 8.0×100 8.0×120

Product code B-LSB

with silver matt masking cap Product code B-KPU100A B-KPU120A B-KPU140A

mm 10 12 12

mm 50 60 60

mm 8.0×80 8.0×100 8.0×120

pcs 4

Outer 6

EAN 13 code 5906675180199

Stair Tread Fixings set 1 1 1

Outer 6 6 6

EAN 13 code 5906675082592 5906675082691 5906675084190

set 1 1 1

Outer 6 6 6

EAN 13 code 5906675083193 5906675083292 5906675083391

for STEEL

with golden masking cap Product code B-KPU100Z B-KPU120Z B-KPU140Z

mm 10 12 12

mm 50 60 60

mm 8.0×80 8.0×100 8.0×120

Product code B-LSM

pcs 4

Outer 6

EAN 13 code 5906675181196

www.koelner.pl

197


DIY range Frame Fixings

Frame Fixings

with Long Expansion Zone and Countersunk Head Screw

with Countersunk Head Screw

Product code B-KDS-08100 B-KDS-08120 B-KDS-08140 B-KDS-10080 B-KDS-10100 B-KDS-10120 B-KDS-10140 B-KDS-10160

mm 8 8 8 10 10 10 10 10

mm 100 120 140 80 100 120 140 160

mm 4.8 4.8 4.8 6.8 6.8 6.8 6.8 6.8

pcs. 4 4 2 6 6 6 2 2

Outer 12 12 12 6 6 6 12 12

EAN 13 code 5906675109794 5906675109893 5906675109978 5906675109190 5906675109299 5906675109398 5906675109473 5906675105970

Frame Fixings

B-KD-10080 B-KD-10100 B-KD-10120 B-KD-10140 B-KD-10160 B-KD-16160 B-KD-16200 with angle hook B-KD-08140K B-KD-10140K B-KD-10160K B-KD-10200K

B-KKS-08060 B-KKS-08080 B-KKS-08100 B-KKS-08120 B-KKS-10100 B-KKS-10120 B-KKS-10140 B-KKS-10160

mm 8 8 8 8 10 10 10 10

mm 60 80 100 120 100 120 140 160

mm 4.8 4.8 4.8 4.8 6.8 6.8 6.8 6.8

pcs. 6 6 4 4 6 6 2 2

Outer 6 6 6 6 6 6 12 12

EAN 13 code 5906675119694 5906675119892 5906675764215 5906675764221 5906675119298 5906675119397 5906675119472 5906675119571

pcs. 6 6 2 2

Outer 6 6 12 12

EAN 13 code 5906675114293 5906675114392 5906675114477 5906675114576

pcs. 12 12 12

EAN 13 code 5906675103686 5906675103785 5906675103884

Frame Fixings

with Long Expansion Zone and Coachscrew

Product code

Product code

with Coachscrew

mm 10 10 10 10 10 16 16

mm 80 100 120 140 160 160 200

mm 6.8 6.8 6.8 6.8 6.8 11.8 11.8

pcs. 6 6 6 2 2 1 1

Outer 6 6 6 12 12 8 8

EAN 13 code 5906675104195 5906675104294 5906675104393 5906675104478 5906675104577 5906675111292 5906675111391

8 10 10 10

140 140 160 200

5.0 7.0 7.0 7.0

2 2 2 2

12 12 12 12

5906675111391 5906675115696 5906675115795 5906675115894

Product code B-KKD-10100 B-KKD-10120 B-KKD-10140 B-KKD-10160

mm 10 10 10 10

mm 100 120 140 160

mm 6.8 6.8 6.8 6.8

Hammer Fixings with Countersunk Head AND Long Expansion Zone

BLISTER PACK Product code B-KWD-08L100 B-KWD-08L120 B-KWD-08L140

198

MEGA PACK mm 8 8 8

mm 100 120 140

pcs. 10 10 2

Outer 6 6 12

EAN 13 code 5906675110295 5906675110394 5906675103877

Product code B-SL-KWD-08L100 B-SL-KWD-08L120 B-SL-KWD-08L140

mm 8 8 8

mm 80 100 120

pcs. 25 25 25


DIY range hammer FIXIngS

hammer FIXIngS

with cylindrical head

with mushroom head

Product code B-06C035 B-06C040 B-06C060 B-06C080

blister pack mm 6 6 6 6

mm 35 40 60 80

pcs. 18 16 14 12

Outer 12 12 12 12

EAN 13 code 5906675108292 5906675108391 5906675108490 5906675108599

Product code B-06K040 B-06K060 B-06K080

mm 6 6 6

mm 40 60 80

pcs. 20 20 15

Outer 6 6 6

EAN 13 code 5906675100197 5906675100593 5906675100890

mm 6 6 6

mm 40 60 80

pcs. 100 50 50

pcs. 12 12 12

EAN 13 code 5906675100180 5906675100586 5906675100883

mega pack Product code

hammer FIXIngS

B-SL-06K040 B-SL-06K060 B-SL-06K080

with countersunk head

hammer FIXIngS with nylon nail

blister pack Product code B-05L030 B-05L040 B-06L040 B-06L050 B-06L060 B-06L080 B-08L060 B-08L080 B-08L100 B-08L120 B-08L140 B-08L160 B-10L100 B-10L120 B-10L140 B-10L160

mm 5 5 6 6 6 6 8 8 8 8 8 8 10 10 10 10

mm 30 40 40 50 60 80 60 80 100 120 140 160 100 120 140 160

pcs. 20 20 20 20 20 15 10 10 10 10 2 2 5 5 2 2

Outer 12 12 12 12 6 6 6 6 6 6 12 12 6 6 12 12

EAN 13 code 5906675100395 5906675100494 5906675100296 5906675101897 5906675100692 5906675100999 5906675101293 5906675101392 5906675101491 5906675101590 5906675101675 5906675101774 5906675102092 5906675102191 5906675112275 5906675112374

mega pack Product code B-SL-05L030 B-SL-05L040 B-SL-06L040 B-SL-06L050 B-SL-06L060 B-SL-06L080 B-SL-08L060 B-SL-08L080 B-SL-08L100 B-SL-08L120 B-SL-10L100 B-SL-10L120 B-SL-10L140 B-SL-10L160

with collar Product code B-06K040P

mm 6

mm 40

pcs. 20

Outer -

EAN 13 code 5906675100098

mm 40

pcs. 20

Outer -

EAN 13 code 5906675100791

without collar Product code B-06L040P

mm 6

ZamaK hammer FIXIngS mm 5 5 6 6 6 6 8 8 8 8 10 10 10 10

mm 30 40 40 50 60 80 60 80 100 120 100 120 140 160

pcs. 100 100 100 80 50 50 25 25 25 25 25 25 25 25

pcs. 12 12 12 12 12 12 12 12 12 12 12 12 12 12

EAN 13 code 5906675100388 5906675100487 5906675100289 5906675101880 5906675100685 5906675100982 5906675101286 5906675101385 5906675101484 5906675101583 5906675102085 5906675102184 5906675102283 5906675102383

Product code B-KMW-06030 B-KMW-06040 B-KMW-06050 B-KMW-06065

mm 6 6 6 6

mm 30 40 50 65

pcs. 10 10 5 5

Outer 12 12 12 12

www.koelner.pl

EAN 13 code 5906675103396 5906675103495 5906675103594 5906675103693

199


DIY range Sleeve Anchors

Sleeve Anchors

with Round Hook

Product code B-KT-08040 B-KT-08065 B-KT-08085 B-KT-10040 B-KT-10050 B-KT-10080 B-KT-10100

mm 8.0 8.0 8.0 10.0 10.0 10.0 10.0

mm 40 65 85 40 50 80 100

pcs. 4 4 4 4 4 4 4

Outer 16 8 12 8 8 12 12

EAN 13 code 5906675020198 5906675020297 5906675020396 5906675021195 5906675021294 5906675021393 5906675021492

B-O10072 B-O10092 B-O10112 B-O10132 B-O10152 B-O10182

B-KTS-08050

B-TM-05 B-TM-06 B-TM-08 B-TM-10 B-TM-12

mm 10.0 10.0 10.0 10.0 10.0 10.0

mm 72 92 122 132 152 182

pcs. 4 4 4 4 4 4

Outer 12 12 12 12 12 12

EAN 13 code 5906675091198 5906675091297 5906675091396 5906675091495 5906675091594 5906675091693

200

pcs. 4

Outer 8

EAN 13 code 5906675025193

mm 6.0 8.0 10.0 12.0 15.0

mm 20 22 30 32 39

pcs. 8 6 4 2 1

Outer 16 16 16 16 16

EAN 13 code 5906675032092 5906675032191 5906675032290 5906675032399 5906675032498

Outer 16

EAN 13 code 5906675032597

with Round Hook

Product code

HardeneD Concrete Screws

B-WHO-75052 B-WHO-75072 B-WHO-75092 B-WHO-75112 B-WHO-75132 B-WHO-75152 B-WHO-75182

mm 50

Brass Anchors

B-TMS-05

Product code

mm 8.0

Brass Expansion Anchors

Product code

Metal Frame Anchors

Product code

Product code

mm 7.5 7.5 7.5 7.5 7.5 7.5 7.5

mm 52 72 92 112 132 152 182

pcs. 6 6 6 6 6 6 6

Outer 12 12 12 12 12 12 12

mm 6.0

mm 20

pcs. 8

Hammerset Anchors

EAN 13 code 5906675096193 5906675096292 5906675096391 5906675096490 5906675096599 5906675096698 5906675096797

Product code B-ST-06 B-ST-08 B-ST-10 B-ST-12 B-ST-16

mm 8.0 10.0 12.0 15.0 20.0

mm 25 30 40 50 65

pcs. 10 8 6 4 2

Outer 16 16 16 16 8

EAN 13 code 5906675030395 5906675030494 5906675030593 5906675030692 5906675030791


DIY range COARSE THREAD DRYWALL SCREWS FOR TIMBER

BLISTER PACK Product code B-FT-3525 B-FT-3535 B-FT-3545 B-FT-3555 B-FT-4270 B-FT-4890 B-FT-48100 B-FT-48110 B-FT-48120

BLISTER PACK mm 3.5 3.5 3.5 3.5 4.2 4.8 4.8 4.8 4.8

mm 25 35 45 55 70 90 100 110 120

pcs. 200 200 100 50 50 25 25 25 25

Outer 6 6 6 6 6 6 6 6 6

EAN 13 code 5906675300191 5906675300290 5906675300399 5906675300498 5906675301099 5906675307190 5906675301297 5906675301396 5906675301495

MEGA PACK Product code B-SL-FT-3525 B-SL-FT-3535 B-SL-FT-3545 B-SL-FT-3555 B-SL-FT-4270 B-SL-FT-4890 B-SL-FT-48100 B-SL-FT-48110 B-SL-FT-48120

FINE THREAD DRYWALL SCREWS FOR METAL

Product code B-FS-3525 B-FS-3535 B-FS-3545 B-FS-3555 B-FS-4270 B-FS-4890 B-FS-48100 B-FS-48110 B-FS-48120

mm 3.5 3.5 3.5 3.5 4.2 4.8 4.8 4.8 4.8

mm 25 35 45 55 70 90 100 110 120

pcs. 200 200 100 50 50 25 25 25 25

Outer 6 6 6 6 6 6 6 6 6

EAN 13 code 5906675305196 5906675305295 5906675305394 5906675305493 5906675307091 5906675301198 5906675307299 5906675307398 5906675307497

mm 3.5 3.5 3.5 3.5 4.2 4.8 4.8 4.8 4.8

mm 25 35 45 55 70 90 100 110 120

pcs. 1000 1000 500 200 200 100 100 100 100

pcs. 12 12 12 12 12 12 12 12 12

EAN 13 code 5906675305189 5906675305288 5906675305387 5906675305486 5906675307084 5906675307183 5906675307282 5906675307381 5906675307480

MEGA PACK mm 3.5 3.5 3.5 3.5 4.2 4.8 4.8 4.8 4.8

mm 25 35 45 55 70 90 100 110 120

pcs. 1000 1000 500 200 200 100 100 100 100

pcs. 12 12 12 12 12 12 12 12 12

EAN 13 code 5906675300184 5906675300283 5906675300382 5906675300481 5906675301082 5906675301181 5906675301280 5906675301389 5906675301488

BUGLE HEAD SELF DRILLING SCREWS

Product code B-SL-FS-3525 B-SL-FS-3535 B-SL-FS-3545 B-SL-FS-3555 B-SL-FS-4270 B-SL-FS-4890 B-SL-FS-48100 B-SL-FS-48110 B-SL-FS-48120

WAFERHEAD SCREWS

FOR METAL

BLISTER PACK Product code B-WS-3525 B-WS-3535 B-WS-3545

BLISTER PACK mm 3.5 3.5 3.5

mm 25 35 45

pcs. 200 200 100

Outer 6 6 6

EAN 13 code 5906675302195 5906675302294 5906675302393

MEGA PACK Product code B-SL-WS-3525 B-SL-WS-3535 B-SL-WS-3545

Product code B-WS-3911 B-WS-3595

mm 25 35 45

pcs. 1000 1000 500

pcs. 8 8 8

EAN 13 code 5906675302188 5906675302287 5906675302386

mm 11 9.5

mm 8 7

pcs. 200 200

Outer 8 8

EAN 13 code 5906675303192 5906675303093

mm 3.9 3.5

mm 11 9.5

mm 8 7

pcs. 1000 1000

pcs. 12 12

EAN 13 code 5906675309187 5906675309286

MEGA PACK Product code

mm 3.5 3.5 3.5

mm 3.9 3.5

B-SL-WS-3911 B-SL-WS-3595

www.koelner.pl

201


DIY range nYLOn SeLF DrILL

metaL caVItY anchOrS

blister pack

blister pack

Product code

mm 14 14

B-DRA-01 B-DRA-01PLUS

mm 25 25

pcs. 20 20

Outer 12 12

EAN 13 code 5906675193199 5906675194196

pcs. 100 100

Pack 12 12

EAN 13 code 5906675192185 5906675194189

mega pack Product code B-SL-DRA-01 B-SL-DRA-01PLUS

mm 14 14

mm 25 25

metaL SeLF DrILL

Product code

mm 8 8 8 8 11 11 11 13 13 13 13 13

mm 3-5 4-10 15-21 34-38 6-12 6-16 16-30 8-12 8-18 16-30 32-45 32-45

pcs. 5 5 5 5 5 5 3 3 3 3 3 3

Outer 16 16 16 16 8 8 8 8 8 12 12 12

EAN 13 code 5906675191195 5906675191294 5906675191393 5906675191492 5906675191799 5906675191898 5906675191997 5906675192192 5906675192291 5906675192390 5906675192499 5906675192796

B-SL-SM-04032 B-SL-SM-04046

mm 8 8

mm 4-10 15-21

pcs. 50 50

Outer 12 12

EAN 13 code 5906675191287 5906675191386

B-SL-SM-04059 B-SL-SM-05037 B-SL-SM-05052 B-SL-SM-05065

8 11 11 11

34-38 6-12 6-16 16-30

50 50 50 25

12 12 12 12

5906675191485 5906675191782 5906675191881 5906675191980

mm 8

mm 4-10

pcs. 5

Outer 16

EAN 13 code 5906675191591

mm 8

mm 4-10

pcs. 50

Outer 12

EAN 13 code 5906675191584

mm 4-10

pcs. 5

Outer 8

EAN 13 code 5906675191690

B-SM-04020 B-SM-04032 B-SM-04046 B-SM-04059 B-SM-05037 B-SM-05052 B-SM-05065 B-SM-06037 B-SM-06052 B-SM-06065 B-SM-06080 B-SM-08080

mega pack Product code

Product code B-DRA-02

mm 13

mm 38

mm 20

pcs. 2

Outer 16

EAN 13 code 5906675193298

with angle hook blister pack Product code B-DRA-03

Product code mm 14

mm 32

mm 25

pcs. 2

Outer 16

EAN 13 code 5906675193397

B-SM-04032K

mega pack Product code B-SL-SM-04032K

with round hook Product code B-SM-04032S

202

mm 8


DIY range PLASTIC SPRING TOGGLE

SPRING TOGGLE BOLTS

with countersunk head screw Product code B-08GL

mm 8

mm 3.5×45

mm 12.5

pcs. 6

Outer 8

EAN 13 code 5906675193694

with pan head screw Product code B-SPO450

pcs. 2

Outer 16

EAN 13 code 5906675193496

Outer 12

EAN 13 code 5906675193595

WITH ANGLE HOOK Product code B-08GK

mm 8

mm 3.5×35

mm 12.5

pcs. 6

Outer 8

EAN 13 code 5906675193892

pcs. 6

Outer 8

EAN 13 code 5906675193793

with countersunk head screw Product code B-10GL

mm 10

mm 4.0×60

mm 9.5

with round hook Product code B-SPO475

pcs. 2

WITH ANGLE HOOK Product code B-10GK

mm 10

mm 4.5×50

mm 9.5

pcs. 6

Outer 8

EAN 13 code 5906675193991

www.koelner.pl

203


DIY range MEGA PACK

COUNTERSUNK CHIPBOARD SCREWS

Product code

BLISTER PACK Product code B-UC-3010 B-UC-3012 B-UC-3016 B-UC-3020 B-UC-3025 B-UC-3030 B-UC-3035 B-UC-3040 B-UC-3512 B-UC-3516 B-UC-3520 B-UC-3525 B-UC-3530 B-UC-3535 B-UC-3540 B-UC-3545 B-UC-4016 B-UC-4020 B-UC-4025 B-UC-4030 B-UC-4035 B-UC-4040 B-UC-4045 B-UC-4050 B-UC-4060 B-UC-5020 B-UC-5025 B-UC-5030 B-UC-5035 B-UC-5040 B-UC-5045 B-UC-5050 B-UC-5060 B-UC-5070 B-UC-5080 B-UC-5100 B-UC-6030 B-UC-6040 B-UC-6045 B-UC-6050 B-UC-6060 B-UC-6070 B-UC-6080 B-UC-6090 B-UC-6100 B-UC-6110 B-UC-6120 B-UC-6140

204

mm 3.0×10 3.0×12 3.0×16 3.0×20 3.0×25 3.0×30 3.0×35 3.0×40 3.5×12 3.5×16 3.5×20 3.5×25 3.5×30 3.5×35 3.5×40 3.5×45 4.0×16 4.0×20 4.0×25 4.0×30 4.0×35 4.0×40 4.0×45 4.0×50 4.0×60 5.0×20 5.0×25 5.0×30 5.0×35 5.0×40 5.0×45 5.0×50 5.0×60 5.0×70 5.0×80 5.0×100 6.0×30 6.0×40 6.0×45 6.0×50 6.0×60 6.0×70 6.0×80 6.0×90 6.0×100 6.0×110 6.0×120 6.0×140

pcs. 50 50 45 40 40 35 30 25 50 45 40 40 35 30 26 25 40 35 30 25 25 22 22 18 16 25 22 20 18 16 14 12 10 9 8 6 13 11 10 9 8 6 5 4 4 4 3 3

Outer 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 12 12 16 16 16 16 16 16 12 12 12 12 12 12

EAN 13 code 5906675310190 5906675310299 5906675310497 5906675310596 5906675310695 5906675310794 5906675310893 5906675310992 5906675311197 5906675311296 5906675311494 5906675311593 5906675311692 5906675311791 5906675311890 5906675311999 5906675313290 5906675313498 5906675313597 5906675313696 5906675313795 5906675313894 5906675313993 5906675314099 5906675314198 5906675316192 5906675316291 5906675316390 5906675316499 5906675316598 5906675316697 5906675316796 5906675316895 5906675316994 5906675317090 5906675317298 5906675318196 5906675318394 5906675318493 5906675318592 5906675318691 5906675318790 5906675318899 5906675318998 5906675319094 5906675319193 5906675319292 5906675319490

mm 3.5×12 3.5×16 3.5×20 3.5×25 3.5×30 3.5×35 3.5×40 3.5×45 4.0×16 4.0×20 4.0×25 4.0×30 4.0×35 4.0×40 4.0×45 4.0×50 4.0×60

B-SL-UC-3512 B-SL-UC-3516 B-SL-UC-3520 B-SL-UC-3525 B-SL-UC-3530 B-SL-UC-3535 B-SL-UC-3540 B-SL-UC-3545 B-SL-UC-4016 B-SL-UC-4020 B-SL-UC-4025 B-SL-UC-4030 B-SL-UC-4035 B-SL-UC-4040 B-SL-UC-4045 B-SL-UC-4050 B-SL-UC-4060

pcs. 200 200 200 170 150 120 100 100 200 200 170 150 120 100 100 100 70

pack 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12

EAN 13 code 5906675311180 5906675311289 5906675311487 5906675311586 5906675311685 5906675311784 5906675311883 5906675311982 5906675313283 5906675313481 5906675313580 5906675313689 5906675313788 5906675313887 5906675313986 5906675314082 5906675314181

MASKING CAPS FOR CHIPBOARD SCREWS

Product code B-UCZ-BIALY B-UCZ-BEZ B-UCZ-BRAZ B-UCZ-CZARNY B-UCZ-SZARY B-UCZ-LIMBA B-UCZ-CZERWONY

Farbe

mm 12 12 12 12 12 12 12

white beige brown black grey pine red

pcs. 25 25 25 25 25 25 25

Outer 16 16 16 16 16 16 16

EAN 13 code 5906675718095 5906675718194 5906675718293 5906675718392 5906675718491 5906675718798 5906675718699

WAFER HEAD SCREWS

without drill point Product code B-WF-4213 B-WF-4216 B-WF-4219 B-WF-4222 B-WF-4225

mm 4.2×13 4.2×16 4.2×19 4.2×22 4.2×25

mm 11 11 11 11 11

pcs. 100 100 50 50 50

Outer 8 8 8 8 8

EAN 13 code 5906675309293 5906675309392 5906675309491 5906675309590 5906675309699

mm 11 11 11 11 11

pcs. 100 100 50 50 50

Outer 8 8 8 8 8

EAN 13 code 5906675308296 5906675308395 5906675308494 5906675308593 5906675308692

self-drilling Product code B-WFS-4213 B-WFS-4216 B-WFS-4219 B-WFS-4222 B-WFS-4225

mm 4.2×13 4.2×16 4.2×19 4.2×22 4.2×25


DIY range SELF-DRILLING SCREWS WITH EPDM WASHER

SELF-DRILLING SCREWS WITH EPDM WASHER

FOR FIXING SHEET METAL TO TIMBER CONSTRUCTIONS

FOR FIXING SHEET METAL TO STEEL CONSTRUCTIONS

BLISTER PACK 20 pcs. Product code B-OD-48025T B-OD-48025T8017 B-OD-48035T B-OD-48035T8004 B-OD-48035T8017 B-OD-48035T6003

SMALL BLISTER PACK Farbe

zinc plated dark brown zinc plated light brown dark brown olive

Product code mm 4.8×25 4.8×25 4.8×35 4.8×35 4.8×35 4.8×35

pcs. Outer EAN 13 code 20 8 5906675336299 20 8 2324802580170 20 8 5906675336398 20 8 2324803580049 20 8 2324803580179 20 8 2324803560034

mm 4.8×25 4.8×25 4.8×25 4.8×25 4.8×35 4.8×35 4.8×35 4.8×35 4.8×35 4.8×35

pcs. Outer EAN 13 code 50 6 5906675336299 50 6 2324802530090 50 6 2324802580040 50 6 2324802580170 50 6 5906675336398 50 6 2324803590109 50 6 2324803530099 50 6 2324803580049 50 6 2324803580179 50 6 2324803560034

BLISTER PACK 50 pcs. Product code B-OD-48025T-D B-OD-48025T3009-D B-OD-48025T8004-D B-OD-48025T8017-D B-OD-48035T-D B-OD-48035T9010-D B-OD-48035T3009-D B-OD-48035T8004-D B-OD-48035T8017-D B-OD-48035T6003-D

Farbe zinc plated brown light brown dark brown zinc plated white brown light brown dark brown olive

B-OC-48016T B-OC-48019T B-OC-48022T

mm 4.8×16 4.8×19 4.8×22

pcs. 25 25 25

Outer 8 8 8

EAN 13 code 5906675325095 5906675325194 5906675325293

pcs. 60 60 60 25 25 25 25 25 25 25 25 25 25 25 25

Outer 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8

EAN 13 code 5906675327099 5906675327198 5906675327297 5906675325392 5906675325491 5906675325590 5906675325699 5906675325798 5906675325897 5906675326993 5906675326092 5906675326191 5906675326290 5906675326399 5906675326597

LARGE BLISTER PACK Product code B-OC-48016T-D B-OC-48019T-D B-OC-48022T-D B-OC-48025T B-OC-48032T B-OC-48035T B-OC-48038T B-OC-48045T B-OC-48055T B-OC-55022T B-OC-55028T B-OC-55032T B-OC-55038T B-OC-55045T B-OC-55055T

mm 4.8×16 4.8×19 4.8×22 4.8×25 4.8×32 4.8×35 4.8×38 4.8×45 4.8×55 5.5×22 5.5×25 5.5×32 5.5×38 5.5×45 5.5×55

SELF-TAPPING PAN HEAD SCREWS DIN 7981

PAN HEAD MACHINE SCREWS DIN 7985

FOR SHEET METAL, ZINC PLATED

WITH PHILIPS CROSS HEAD, ZINC PLATED

Product code B-83116-29130-OC B-83116-29160-OC B-83116-35130-OC B-83116-35190-OC B-83116-42160-OC B-83116-42250-OC B-83116-42320-OC

mm 2.9×13 2.9×16 3.5×13 3.5×19 4.2×16 4.2×25 4.2×32

pcs. 30 25 30 20 25 20 15

Outer 16 16 16 16 16 16 16

EAN 13 code 5906675346298 5906675346397 5906675346496 5906675346595 5906675346694 5906675346793 5906675346892

Product code B-82202-0408-OC B-82202-0416-OC B-82202-0420-OC B-82202-0430-OC B-82202-0512-OC B-82202-0516-OC B-82202-0616-OC B-82202-0625-OC

mm 4.0×08 4.0×16 4.0×20 4.0×30 5.0×12 5.0×16 6.0×16 6.0×25

pcs. 25 22 18 15 22 20 15 12

Outer 16 16 16 16 16 16 16 16

EAN 13 code 5906675344096 5906675344195 5906675344294 5906675344393 5906675344492 5906675344591 5906675344690 5906675344799

www.koelner.pl

205


DIY range angLe Screw hOOKS ZInc PLateD

Product code B-HK-35 B-HK-45 B-HK-60 B-HK-80

mm 3.5×40 4.0×45 6.0×50 8.0×70

pcs. 12 8 4 4

Outer 16 16 16 12

rOUnD Screw hOOKS ZInc PLateD

EAN 13 code 5906675328195 5906675328294 5906675328393 5906675328492

Product code B-HS-35 B-HS-50 B-HS-60

mm 3.5×45 5.0×55 6.0×65

mm 5.0×50 5.0×60 7.0×50

pcs. 4 4 4

EAN 13 code 5906675328591 5906675328690 5906675328799

with countersunk head din 965 zinc plated

Product code

B-KONF-5050 B-KONF-5060 B-KONF-7050

Outer 16 16 12

machIne ScrewS

SOcKet heaD FUrnItUre Screw

Product code

pcs. 12 8 4

Outer 16 16 16

EAN 13 code 5906675774190 5906675774398 5906675774596

maSKIng caPS

mm 4.0×10 4.0×16 4.0×20 4.0×30 5.0×16 5.0×20 5.0×40 6.0×16 6.0×25

B-82207-0410-OC B-82207-0416-OC B-82207-0420-OC B-82207-0430-OC B-82207-0516-OC B-82207-0520-OC B-82207-0540-OC B-82207-0616-OC B-82207-0625-OC

pcs. 25 22 18 15 20 15 12 15 12

Outer 16 16 16 16 16 16 16 16 16

EAN 13 code 5906675342092 5906675342191 5906675342290 5906675342399 5906675342498 5906675342597 5906675342696 5906675342894 5906675342993

for socket head wood screws

StaPLeS zinc plated Product code B-KONFZ-BIALY B-KONFZ-BEZ B-KONFZ-CZARNY B-KONFZ-BRAZ B-KONFZ-SZARY B-KONFZ-SOSNA

206

mm 12 12 12 12 12 12

Farbe white beige black brown grey pine

pcs. 25 25 25 25 25 25

Outer 16 16 16 16 16 16

EAN 13 code 5906675775197 5906675775296 5906675775395 5906675775494 5906675775593 5906675775791

Product code B-SK-3025 B-SK-3030

mm 3.0×25 3.0×30

dkg 5 5

pcs. 20 15

Outer 16 16

EAN 13 code 5906675716596 5906675716695


DIY range STANDARD FLAT WASHERS

HEXAGONAL STANDARD NUTS

ZINC PLATED, DIN 125

ZINC PLATED, DIN 934

Product code B-PDM-03 B-PDM-04 B-PDM-05 B-PDM-06 B-PDM-08 B-PDM-10 B-PDM-12

mm M3 M4 M5 M6 M8 M10 M12

pcs. 160 120 80 40 20 10 10

Outer 16 16 16 16 16 16 16

EAN 13 code 5906675761398 5906675761091 5906675760193 5906675760292 5906675760490 5906675760698 5906675760896

B-NAMKOL-06 B-NAMKOL-08 B-NAMKOL-10

pcs. 6 4 2

Outer 16 16 16

EAN 13 code 5906675768694 5906675768793 5906675768892

B-NPO-0525 B-NPO-0628 B-NPO-0828 B-NPO-1030 B-NPO-1240 B-NPO-1645

mm M5 M6 M8 M10 M12 M16

mm 25 28 28 30 40 45

pcs. 12 10 8 6 4 2

Outer 16 16 16 8 8 8

EAN 13 code 5906675031293 5906675031392 5906675031491 5906675031590 5906675031699 5906675031798

ZINC PLATED TIMBER NAILS

Product code B-GWS-1220OC B-GWS-1425OC B-GWS-1630OC B-GWS-1835OC B-GWS-2040OC B-GWS-2250OC

mm 1.2×20 1.4×25 1.6×30 1.8×35 2.0×40 2.2×50

dkg 10 10 10 10 10 10

pcs. 40 35 30 20 10 5 3

Outer 16 16 16 16 16 16 16

EAN 13 code 5906675765396 5906675765099 5906675765198 5906675765297 5906675765495 5906675765693 5906675765891

Product code B-NAMSA-05 B-NAMSA-06 B-NAMSA-08 B-NAMSA-10 B-NAMSA-12

mm M5 M6 M8 M10 M12

pcs. 10 6 6 4 2

Outer 16 16 16 16 16

EAN 13 code 5906675767192 5906675767291 5906675767499 5906675767697 5906675767895

ZINC PLATED WING NUTS

COUPLING NUTS

Product code

mm M3 M4 M5 M6 M8 M10 M12

WITH NYLON INSERT ZINC PLATED, DIN 985

FULL PATTERN, DIN 1587

mm M6 M8 M10

B-NAM-03 B-NAM-04 B-NAM-05 B-NAM-06 B-NAM-08 B-NAM-10 B-NAM-12

SELF-LOCKING NUTS

ZINC PLATED HEXAGONAL DOMED CAP NUTS

Product code

Product code

pcs. 300 300 200 140 100 60

Outer 16 16 16 16 16 16

EAN 13 code 5906675732497 5906675732596 5906675732695 5906675732794 5906675732893 5906675732992

Product code B-NAMSK-05 B-NAMSK-06 B-NAMSK-08 B-NAMSK-10 B-NAMSK-12

mm M5 M6 M8 M10 M12

pcs. 6 4 3 2 2

Outer 16 16 16 8 8

EAN 13 code 5906675766195 5906675766294 5906675766492 5906675766690 5906675766898

PLAIN TIMBER NAILS

Product code B-GWS-1220 B-GWS-1425 B-GWS-1630 B-GWS-1835 B-GWS-2040 B-GWS-2250

mm 1.2×20 1.4×25 1.6×30 1.8×35 2.0×40 2.2×50

dkg 10 10 10 10 10 10

pcs. 300 300 200 140 100 60

Outer 16 16 16 16 16 16

www.koelner.pl

EAN 13 code 5906675731391 5906675731599 5906675731698 5906675731797 5906675731896 5906675731995

207


DIY range PLAIN MASONRY NAILS

MASONRY NAILS ZINC PLATED

Product code B-GWB-1420 B-GWB-1430 B-GWB-2040 B-GWB-2250 B-GWB-2560 B-GWB-2865 B-GWB-2870 B-GWB-3080 B-GWB-3590 B-GWB-40100 B-GWB-45125

mm 1.4×20 1.4×30 2.0×40 2.2×50 2.5×60 2.8×65 3.0×70 3.0×80 3.5×90 4.0×100 4.5×125

dkg 10 10 10 10 10 10 15 15 15 15 15

pcs. 250 150 100 60 40 30 35 30 20 15 10

Outer 16 16 8 8 8 8 12 12 12 12 12

EAN 13 code 5906675735894 5906675735993 5906675734095 5906675734194 5906675734293 5906675734392 5906675734491 5906675734590 5906675734699 5906675734798 5906675734897

Product code B-GWB-2250OC B-GWB-2560OC B-GWB-2865OC B-GWB-3070OC B-GWB-3080OC B-GWB-3090OC B-GWB-40100OC B-GWB-45125OC

mm 2.2×50 2.5×60 2.8×65 3.0×70 3.0×80 3.0×90 4.0×100 4.5×125

dkg 10 10 10 15 15 15 15 15

pcs. 60 40 30 35 30 20 15 10

Outer 8 8 8 12 12 12 12 12

EAN 13 code 5906675736198 5906675736297 5906675736396 5906675736495 5906675736594 5906675736693 5906675736792 5906675736891

HARDENED NAILS ZINC PLATED

BRASS TIMBER NAILS Product code Product code B-GWS-1220M B-GWS-1425M B-GWS-1630M B-GWS-1835M B-GWS-2040M B-GWS-2250M

mm 1.2×20 1.4×25 1.6×30 1.8×35 2.0×40 2.2×50

dkg 10 10 10 10 10 10

pcs. 250 300 200 140 100 60

Outer 16 16 16 16 16 16

EAN 13 code 5906675733395 5906675733593 5906675733692 5906675733791 5906675733890 5906675733999

BLISTER PACK

B-GWPAP-2020 B-GWPAP-2525 B-GWPAP-3030 B-GWPAP-3035 B-GWPAP-3040

B-SL-GWPAP-2020 B-SL-GWPAP-2525 B-SL-GWPAP-3030 B-SL-GWPAP-3035 B-SL-GWPAP-3040

208

dkg 10 10 10 10 10 10 10 10

pcs. 100 80 50 40 30 10 20 10

Outer 16 16 16 16 16 12 16 12

EAN 13 code 5906675739090 5906675739199 5906675739298 5906675739397 5906675739595 5906675739793 5906675739991 5906675739892

Outer 16 16 16

EAN 13 code 5906675716190 5906675716299 5906675716398

BLISTER PACK mm 2.0×20 2.5×25 3.0×30 3.0×35 3.0×40

dkg 7 7 7 7 7

pcs. 45 40 35 30 25

Outer 16 16 16 16 16

EAN 13 code 5906675735191 5906675735290 5906675735399 5906675735597 5906675735795

MEGA PACK Product code

mm 2.0×25 2.0×30 2.0×40 2.8×40 2.8×60 3.8×80 4.0×50 4.5×100

UPHOLSTERY NAILS

ROOFING NAILS

Product code

B-GWH-2025 B-GWH-2030 B-GWH-2040 B-GWH-2840 B-GWH-2860 B-GWH-3880 B-GWH-4050 B-GWH-45100

Product code B-GWT-1616 B-GWT-1818 B-GWT-2020

kg 0.5 0.5 0.5 0.5 0.5

pack 12 12 12 12 12

EAN 13 code 5906675735184 5906675735283 5906675735382 5906675735580 5906675735788

dkg 10 10 10

pcs. 200 150 120

MEGA PACK Product code

mm 2.0×20 2.5×25 3.0×30 3.0×35 3.0×40

mm 1.6×16 1.8×18 2.0×20

B-SL-GWT-1616 B-SL-GWT-1818 B-SL-GWT-2020

mm 1.6×16 1.8×18 2.0×20

kg 0.5 0.5 0.5

pack 12 12 12

EAN 13 code

5906675716183 5906675716282 5906675716381


DIY range OTHER FIXINGS AND ACCESSORIES CABLE CLIPS “FLOP” – ASSEMBLED with nails

CABLE CLIPS ASSEMBLED with nails

FOR FIXING ROUND CABLES

FOR FIXING FLAT RECTANGULAR CABLES

Product code B-FLO-F0 B-FLO-F1 B-FLO-F2 B-FLO-F3 B-FLO-F4

mm 3-6 6-9 9-13 13-18 18-24

mm 1.4×20 2.0×25 2.0×30 2.5×37 2.5×42

dkg 60 30 20 10 6

pcs. 16 16 8 8 8

Outer 64 64 32 32 32

EAN 13 code 5906675714097 5906675714196 5906675714295 5906675714394 5906675714493

Product code B-FLO-P3/5 B-FLO-P4/6 B-FLO-P5/8 B-FLO-P5/9 B-FLO-P6/10 B-FLO-P6/13

mm 3×5 4×6 5×8 5×9 6×10 6×13

mm 1.5×20 1.8×20 1.8×24 1.8×24 1.8×24 1.8×25

dkg 60 30 25 25 20 20

pcs. 16 16 8 8 8 8

Outer 64 64 32 32 32 32

EAN 13 code 5906675714790 5906675714899 5906675714998 5906675715094 5906675715193 5906675715292

ROUND FELT PADS

BALL SHAPED DOOR STOPS WITH EXPANSION PLUG AND SCREW

WHITE Product code B-ODBK-01 B-ODBK-02 B-ODBK-03 B-ODBK-04 B-ODBK-05

mm 35 35 35 35 35

Farbe white beige brown black grey

Product code pcs. 1 1 1 1 1

Outer 8 8 8 8 8

EAN 13 code 5906675710396 5906675710495 5906675710594 5906675710693 5906675710792

B-FI-15O B-FI-25O B-FI-45O

Product code

EXPANSION PLUGS FOR CLIPS

B-FLO-K06

mm 6.0

mm 22

pcs. 35

Outer 16

pcs. 18 12 4

Outer 16 16 8

EAN 13 code 5906675712093 5906675712192 5906675712291

mm 15 25 45

pcs. 18 12 4

Outer 16 16 8

EAN 13 code 5906675713090 5906675713199 5906675713298

BROWN

B-FI-15O-BR B-FI-25O-BR B-FI-45O-BR

Product code

mm 15 25 45

SQUARE FELT PADS

EAN 13 code 5906675715391

WHITE Product code B-FI-15K B-FI-25K B-FI-45K

mm 15×15 25×25 45×45

pcs. 18 12 4

Outer 16 16 8

EAN 13 code 5906675712390 5906675712499 5906675712598

mm 15×15 25×25 45×45

pcs. 18 12 4

Outer 16 16 8

EAN 13 code 5906675713397 5906675713496 5906675713595

BROWN Product code B-FI-15K-BR B-FI-25K-BR B-FI-45K-BR

www.koelner.pl

209


DIY range “C” TYPE SNAP HOOKS

WIRE ROPE CLIPS ZINC PLATED

Product code B-IN-ZAC-03 B-IN-ZAC-05 B-IN-ZAC-06 B-IN-ZAC-08 B-IN-ZAC-10 B-IN-ZAC-12

mm 3.0 5.0 6.0 8.0 10.0 12.0

pcs. 5 4 3 2 1 1

Outer 16 16 16 16 8 8

EAN 13 code 5906675719092 5906675719290 5906675719399 5906675719597 5906675719795 5906675719993

DIY SET

Product code B-IN-KN-06 B-IN-KN-08 B-IN-KN-10 B-IN-KN-12

mm 6.0×60 8.0×80 10.0×100 12.0×140

pcs. 1 1 1 1

Outer 16 12 12 6

EAN 13 code 5906675755090 5906675755199 5906675755298 5906675755397

HOSE CLAMPS

Product code

Product code

Pack 6

B-MM-00

EAN 13 code

5906675905099

WOODEN DOWELS

B-IN-OB-0814 B-IN-OB-1320 B-IN-OB-1928 B-IN-OB-2638 B-IN-OB-3850

mm 8-14 13-20 19-28 26-38 38-50

pcs. 3 2 2 1 1

Outer 16 16 16 16 16

EAN 13 code 5906675717098 5906675717296 5906675717494 5906675717692 5906675717890

STEEL ANCHORS FOR AERATED CONCRETE

Product code B-DR-0830 B-DR-0845 B-DR-0860

mm 8.0 8.0 8.0

mm 30 45 60

pcs. 15 10 8

Outer 16 16 16

EAN 13 code 5906675095394 5906675095493 5906675095592

DOOR LATCH

Product code B-IN-ZAS-45

210

mm 120

pcs. 1

Outer 12

EAN 13 code 5906675770697

Product code B-KGS-0632 B-KGS-0838 B-KGS-0860 B-KGS-1060

mm 6.0 8.0 8.0 10.0

mm 30 38 60 60

pcs. 4 4 4 4

Outer 16 16 16 16

EAN 13 code 5906675776194 5906675776293 5906675776392 5906675776491


DIY range SeLF DrILLIng DrYwaLL ScrewS

eXPanSIOn PLUgS

Product code

mm 5 6 8 10 12

B-WM-FIX-K05 B-WM-FIX-K06 B-WM-FIX-K08 B-WM-FIX-K10 B-WM-FIX-K12

mm 25 30 40 50 60

pcs. 400 300 200 100 50

Pack 24 24 24 24 24

EAN 13 code 5906675115160 5906675115177 5906675115818 5906675115184 5906675115191

eXPanSIOn PLUgS

B-W-FIX-08K

mm 8

mm 40

mm 5.0×50

pcs. 25

Pack 24

EAN 13 code 5906675080260

eXPanSIOn PLUgS with countersunk head screw

Product code B-W-FIX-05+ B-W-FIX-06+ B-W-FIX-08+ B-W-FIX-10+560

mm 5 6 8 10

mm 25 30 40 50

B-WL-05L030 B-WL-06L040 B-WLM-06L040 B-WL-06L050 B-WL-06L060 B-WLM-06L060 B-WL-06L080 B-WLM-06L080 B-WL-08L060 B-WLM-08L060 B-WL-08L080 B-WL-08L100 B-WLM-08L100 B-WL-10L100 B-WL-10L120 B-WL-06K040 B-WLM-06K040 B-WL-06K060 B-WL-06K080

mm 5 6 6 6 6 6 6 6 8 8 8 8 8 10 10 6 6 6 6

mm 3.5×30 3.5×30 4.0×45 5.0×60

mm 30 40 40 50 60 60 80 80 60 60 80 100 100 100 120 40 40 60 80

mm 3.9×11 3.9×9.5

pcs. 200 200

Pack 24 24

EAN 13 code 5906675303161 5906675303062

Product code B-W-WS-3525 B-W-WS-3535 B-W-WS-3545

mm 3.5×25 3.5×35 3.5×45

pcs. 200 200 100

Pack 24 24 24

EAN 13 code 5906675302164 5906675302263 5906675302362

FIne threaD DrYwaLL ScrewS FOr metaL pcs. 100 80 50 50

Pack 24 24 24 24

EAN 13 code 5906675050270 5906675050263 5906675081861 5906675082462

hammer FIXIngS

Product code

B-W-WS-3911 B-W-WS-3595

SeLF DrILLIng DrYwaLL ScrewS FOr metaL

with angle hook

Product code

Product code

pcs. 100 100 50 80 80 25 50 25 50 12 35 25 12 12 12 100 50 80 50

Product code B-W-FS-3525 B-W-FS-3535 B-W-FS-3545 B-W-FS-3555 B-W-FS-4270 B-W-FS-4890 B-W-FS-48100 B-W-FS-48110 B-W-FS-48120

Pack 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24

EAN 13 code 5906675020884 5906675021089 5906675021188 5906675021386 5906675021584 5906675112268 5906675021683 5906675112282 5906675021782 5906675112367 5906675021980 5906675022086 5906675112381 5906675022185 5906675022284 5906675020389 5906675020488 5906675020686 5906675020785

mm 3.5×25 3.5×35 3.5×45 3.5×55 4.2×70 4.8×90 4.8×100 4.8×110 4.8×120

pcs. 200 200 100 50 50 25 25 25 25

Pack 24 24 24 12 12 12 12 12 12

EAN 13 code 5906675305165 5906675305264 5906675305363 5906675305462 5906675307060 5906675307169 5906675307268 5906675307367 5906675307466

cOarSe threaD DrYwaLL ScrewS FOr tImber

Product code B-W-FT-3525 B-W-FT-3535 B-W-FT-3545 B-W-FT-3555 B-W-FT-4270 B-W-FT-4890 B-W-FT-48100 B-W-FT-48110 B-W-FT-48120

mm 3.5×25 3.5×35 3.5×45 3.5×55 4.2×70 4.8×90 4.8×100 4.8×110 4.8×120

pcs. 200 200 100 50 50 25 25 25 25

Pack 24 24 24 12 12 12 12 12 12

www.koelner.pl

EAN 13 code 5906675300160 5906675300269 5906675300368 5906675300467 5906675301068 5906675301167 5906675301266 5906675301365 5906675301464

211


DIY range mIX OF FIX PLUgS

Product code B-W-MIX-K4FIX: FIX-K05 FIX-K06 FIX-K08 FIX-K10

mm

mm

5 6 8 10

25 30 40 50

mIX OF hammer FIXIngS

Pack 380 160 100 80 40

EAN 13 code 5906675024981

B-W-MIX-FIX: FIX-05+ FIX-06+ FIX-08+ FIX-10+560

mm

mm

mm

5 6 8 10

25 30 40 50

3.5×30 3.5×30 4.0×45 5.0×60

Pack 80 30 20 20 10

B-W-MIX-WB: 06K040 06K060 06K080

EAN 13 code 5906675020082

Product code B-W-MIX-WBL: 06L040 06L060 06L080

Product code

B-W-MIX-KH: 06K 08K 10K 06S 08S 10S

mm

mm

mm

6 8 10 6 8 10

30 40 50 30 40 50

4.0×35 5.0×50 6.0×55 4.5×50 5.0×65 6.0×85

Pack 72 20 16 12 10 8 6

legend:

212

mm

6 6 6

40 60 80

Pack 60 20 20 20

EAN 13 code 5906675020181

mm

mm

6 6 6

40 60 80

Pack 60 20 20 20

EAN 13 code 5906675020280

mIX OF naILS

mIX OF PLUgS wIth hOOK ScrewS

Product code

mm

mIX OF hammer FIXIngS wIth cOUnterSUnK heaD

mIX OF FIX PLUgS wIth ScrewS

Product code

Product code

EAN 13 code 5906675020587

B-W-MIX-GW: GWT-1616 GWS-1425 GWB-1835 GWH-2050

mm 1.6×16 1.4×25 1.8×35 2.0×50

Pack 500g 125g 125g 125g 125g

description of screw/bolt heads

max. thickness of isolation material

slotted

rope lay

cross PHILIPS

blister packaging

cross POZIDRIV

tub packaging

hexagonal TORX

quantity per unit box

hexagonal HEX

quantity per outer box

square

EAN 13 code

hexagonal

EAN 13 code 5906675024882


Koelner SA has been singled out in the prestigious FORBES report, Forbes Diamonds 2009, as amongst the most dynamically developing Company.

Puls Biznesu counted KOELNER Company among the Pillars of the Polish Economy in 2008. Pillars of the Polish Economy include medium-sized and large companies which conduct their business activities in a clear and honest way, achieve excellent financial results, but at the same time are highly committed to society, and know how to react positively to the needs of the local people.

In 2007 KOELNER SA received EuroCertificate. The distinction is a signal to other entities that they are dealing with a responsible, and highly esteemed partner on the market. Having successfully gone through a three-stage assessment, conducted by law, management and accounting specialists, the company may then say it is reliable and honest.

In 2008, in the contest organized by Roland Berger Strategy Consultants under the auspices of the European Business Summit and CNN, KOELNER SA was awarded the title of „Best of European Business” in the “Growth” category. A company is chosen through the process of synthetic assessment taking into account diversified quantitative and qualitative criteria. The best and the most efficient European Companies are the winners.

The Management Board of the Warsaw Stock Exchange hereby certifies that Koelner SA securities were listed on 30 November 2004, which entitles the Company to use the logo of “Listed Company”.

Profile for ACCORD PLUS Kft.

Rawl  

Rawl  

Advertisement