Simple DIY concrete leveling There are a number of companies that specialize on concrete leveling works especially for people who want to get a new look floor somewhere in their home. If you want to do this type of repair but you donâ€™t have the money it takes to do it to the end, you may want to consider a process known as concrete resurfacing. Concrete resurfacing is definitely lighter than repaving and it will save you a good amount of cash while giving the floor an appearance of complete newness. If you think you have the energy to do it yourself, you may want to follow these simple tips: Using a high powered hosepipe, thoroughly clean the floor you want to give a new face. Once the surface is clean, prepare the surface by combining seven parts of concrete surface with one part of water and then fill up the damaged areas with the mixture you have prepared. Once the areas has dried up, use the hose pipe to clean the area again and then use a squeegee to remove the water. A squeegee is a tool that has a smooth, flat rubber blade that builders use to remove excess liquid from a work surface or to control its flow. Next get a five gallon bucket of water and pour in some seven pints of water. Empty a 40. Lb bag of resurfacer inside the bucket as you stir slowly using a paddle mixer to stir. The stirring should be continued for close to five minutes or until such a time when the cement is thick enough and doesnâ€™t have any lumps. The color liquid should be added into the cement at this time if you plan to have any color. Once the mixture is ready, it should be slowly poured into the area that needs to be repaired. This needs to be done gradually and you need to pour small amounts at a time. Use a trowel so as to spread the mixture to all areas where it is required. The concrete needs to be swept gently as it hardens and as you do it, you may want to polish it well so as to give it its final appearance. When everything is constant, this should take no more than six or so hours for the concrete to dry up. One thing you need to remember is that it is helpful if you plan to work the area in sections that you can easily manage. Avoid spreading the resurfacer on the entire area if it is a big one. You want to avoid a situation where some of it will actually begin to dry up before you can get the chance to work on it and spread it out evenly. What is clear is that concrete resurfacing may not be as hard as concrete leveling Ohio and for those who have the guts; this is something you can do on your own. You may want to do a little more research and perhaps read a book or two on how to do the whole thing properly. However, remember that concrete flooring companies have the skill and expertise to do this type of job and you wonâ€™t lose anything to ask for professional help in order to restore your concrete floor to what it may have been originally.