Page 71

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

BEAM 2

-Span = 35’ -Tributary = 25’/ 5’ = 5’ -Use Live Load Reduction? 1.4 At = (5’)(35’) = 175sqft KLL = 2 (for interior beam) KLL(At) = 350 L = Lo(.25+((15)/ ((KLL At)^(1/2)) = 100((.25)+((15)/ ((350)^2) = 105.178 (use 100)

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

BEAM 1

3B

-Span = 35’ -Tributary = 25’/ 5’ = 5’ -Use Live Load Reduction? At = (5’)(35’) = 175sqft KLL = 1 (for exterior beam) KLL(At) = 175 L = Lo(.25+((15)/ ((KLL At)^(1/2)) = 100((.25)+((15)/ ((175)^2) = 138.39 (use 100)

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

GIRDER

Wdl Wll

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

UP

Wdl Wll

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

DN

BEAM 2

2B

PRODUCED BY AN AUTODESK STUDENT PRODUCT

BEAM 1

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

W = ((110+100)*5) / 1000 = 1.05 kips -Beam continiously laterally supported by deck

W = ((110+100)*5) / 1000 = 1.05 kips -Beam continiously laterally supported by deck

[TBL 3-2] USE W18X40 check: Mpx/Ob = 196 > 160.78 (beam is okay)

[TBL 3-2] USE W18X40 check: Mpx/Ob = 196 > 160.78 (beam is okay)

-Check Deflection: unit LL deflection to span/360 4B WLL = (5*100) / 1000 = .5 klf Delta = (5W(l^4)) / 384EI I = 612 (w18x40) = [5(.5klf*12in/ft)((35*12)^4) / 384*29000*612 = 136.97/12/12 = .95 in span/360 = 35(12)/ 360 = 1.17 .95 < 1.17 (beam is adequate)

-Check Deflection: unit LL deflection to span/360 WLL = (5*100) / 1000 = .5 klf Delta = (5W(l^4)) / 384EI I = 612 (w18x40) = [5(.5klf*12in/ft)((35*12)^4) / 384*29000*612 = 136.97/12/12 = .95 in span/360 = 35(12)/ 360 = 1.17 .95 < 1.17 (beam is adequate)

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

ENLARGED FRAMING PLAN 8

24

-P = (DL + LL)(Beam Spacing * Length) =(100 + 130)(5 * 35) = 40250 lb (40.25 kips)

Mmax = 603.75 Use W21x101 Mp / Omegab = 631 > 603.75 (beam is okay)

80.5

80.5

80.5

40.25

-40.25

-80.5

-402.5 -603.75 PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

0

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

4

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

GIRDER 1

SCALE: 1/8” = 1’-0”

ENLARGED FRAMING PLAN

S 104

PRODUCED BY AN AUTODESK STUDENT PRODUCT

Integrated Design Competition Drawing Set  
Integrated Design Competition Drawing Set  

Drawing set from Kent State University's Integrated Design Competition Spring 2013- Third place winner

Advertisement