Page 48

Distribution Overview

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

DN

Each level is divided into a number of different zones, each which is serviced separately. There is a main feed of refrigerant running from the main mechanical room (located on the second floor) to the two mechanical rooms located within the core of the building. These lines run to each branch controller located on each floor. From these branch controller, separate runs go to each zone feeding each VRF unit. This refrigerant lines can go to each branch controller of to a sub branch controller is zones need to be further divided into smaller zones. There are two DOAS located on the roof, each DOAS handling 12,000 CFM. The fresh air is then fed down two veritcal chases located within the secondary mechanical rooms located on each floor. From each floor fresh air is then fed to each VRF unit.

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

FIRST FLOOR DISTRIBUTION PLAN 10

0

20

60

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

VRF Unit

Refrigetant Pipe Fresh Air Duct

Mechanical Distribution

Branch Control

PRIME FLOOR DISTRIBUTION PLAN 10

0

20

60

Main Vertical Fresh Air Duct

M 103

Integrated Design Competition Drawing Set  

Drawing set from Kent State University's Integrated Design Competition Spring 2013- Third place winner

Advertisement