REAR OIL SEAL REAR OIL SEAL Removal and Installation
PFP:33140
A EDS0032L
REMOVAL 1. 2. 3.
Partially drain the transfer fluid. Refer to TF-12, "DRAINING" . Remove the rear propeller shaft. Refer to PR-8, "Removal and Installation" . Remove the dust cover from the rear case. CAUTION: Do not damage the rear case.
B
C
TF
E WDIA0127E
4.
F
Remove the rear oil seal from the rear case, using Tool. CAUTION: Do not damage the rear case. Tool number
G
: KV381054S0 H
I LDIA0139E
INSTALLATION 1.
Install the rear oil seal until it is flush with the end face of the rear case, using Tool. Tool number
J
: KV38100500 K
CAUTION: ● Do not reuse oil seal. ● Apply petroleum jelly to oil seal.
L
LDIA0140E
2.
Apply petroleum jelly to the circumference of the new dust cover. Position the dust cover using the identification mark as shown. CAUTION: ● Do not reuse dust cover. ● Position the identification mark at the position shown.
SDIA3377E
TF-103
M