Issuu on Google+

WIRE PARTITION CATALOG


ABOUT US When you need the best material storage and handling systems for your operation, 1SOURCE has the answer.  As a single source, turnkey provider of material handling systems and services, you can count on 1SOURCE to deliver the products and services you need. Teaming with industry leading manufacturers, the 1SOURCE management team has been providing its customers expert space utilization design and systems integration since 1996.  Specializing in all aspects of material handling allows us to provide our customers with the very best service for all of their varying needs.  1Source means just that. Everything you need under one roof. Together with you, 1SOURCE will determine your needs and develop a timely solution that fits your vision and budget.  1SOURCE will take care of all the details, from space planning to worry-free installation and service. What that means for you is peace of mind knowing that we have the experience to get the job done right…FROM START TO FINSIH Toll Free 800.215.4999


®

STORAGE LOCKERS

Storage solutions…

for every type of work…and play.


Storage Lockers

Simple, economical, modular design

Single or double tier design…

SINGLE TIER Convenient, walk in, single tier lockers are ideal for most storage areas. At 7’-6” high and either 3’, 4’, or 5’ deep there is plenty of room for storage of those out-of-season or seldom used items. Single tier lockers come in 3’ or 4’ widths. Width Depth Height Weight* 3’-0” 3’-0” 7’-6” 103# 3’-0” 4’-0” 7’-6” 113# 3’-0” 5’-0” 7’-6” 123# 4’-0” 3’-0” 7’-6” 112# 4’-0” 4’-0” 7’-6” 122# 4’-0” 5’-0” 7’-6” 132# *For 2-sided unit DOUBLE TIER Double tier lockers make the most efficient use of available space. Individual storage areas are accessed through doors 3’-9” high by 3’ or 4’ wide. Upper and lower storage cubes are separated by a formed 16-gauge steel divider. Storage areas may be 3’, 4’, or 5’ deep. Width Depth Height Weight* 3’-0” 3’-0” 7’-6” 132# 3’-0” 4’-0” 7’-6” 149# 3’-0” 5’-0” 7’-6” 165# 4’-0” 3’-0” 7’-6” 152# 4’-0” 4’-0” 7’-6” 171# 4’-0” 5’-0” 7’-6” 190#

OTHER OPTIONS TOPS We recommend tops for the lockers if there is more than a 6” gap between the ceiling and locker. Top panels may be sized to cover two or more lockers. BACKS Necessary when lockers are placed back-to-back, or installed in a row away from the wall. BOTTOMS Bottoms provide a uniform, smooth, surface to stack items while protecting locker contents from damp basement floors. Locker bottoms are made out of tough 7/8” extruded, moisture-resistant vinyl. EXTRA WIDTH Storage areas wider than 4 feet require an extra front panel. These panels are manufactured in one foot increments from 1 to 5 feet wide. BLIND STORAGE Sheet metal may be substituted for mesh to provide a solid, private locker…see top of next page. SPECIALS Our lockers can be modified if your project has a special application, (e.g. high security, wall mounted garage type, etc.) Call us…we will be glad to help.

*For 2-sided unit with divider

NON–STOCK SIZES WireCrafters can build lockers to match your exact needs. We are not limited to the sizes listed in this brochure. APPROVAL AND ERECTION DRAWINGS Approval and erection drawings

2

are provided with each order. Any special panels will be tagged and referenced on the drawing. SERVICE If you should have a question or installation problem, our customer service personnel will be glad to assist you.


SOLID METAL design…single or double tier When the privacy afforded by solid enclosed lockers is preferred…WireCrafters has the answer. Our lockers are manufactured with quality and precision to fit your exact requirements. WireCrafters’ mass production techniques provide a high-quality, heavy-duty product at an affordable price. Sizes or Styles…Single or Double Tier Standard Widths…choose 3’ or 4’ Standard Depths…choose 3’ or 4’ Other sizes are available. All doors are supplied with padlock lugs.

The Solid Metal Storage Locker Advantages… • F actory engineered quality. • Heavy 16-gauge steel door and wall panels. • Door and wall panels framed with steel angle. • Custom fit to your exact requirements. • No exposed hardware means extra security. • Pr e-fabricated sections install quickly for less disruption to the building. Solid locker specifications are the same as the wire mesh locker specs listed on the reverse of this brochure, except 16-gauge sheet metal is substituted for woven wire mesh.

Wall-Mounted GARAGE STORAGE When space is at a premium, WireCrafters’ wall-mounted garage storage units deliver the best storage solution for limited space areas. Wall mounting feature allows ample room for even the largest vehicle to park, while maximizing the garage’s storage potential. Each

unit is supplied with padlock lugs. Ideal for storing seasonal and bulky items that are not used regularly. Two sliding access doors. Standard size is 8’ x 3’ x 3’, other sizes available. Ceilings are optional.

SPORT LOCKER

GEAR LOCKER

SHOP LOCKER

Our Sport Lockers are used by professional sports teams, college athletic departments, and municipal school districts across the country. These lockers are tough; constructed of 16-gauge sheet metal and our 10-gauge woven wire mesh (2” x 1”) and are designed to house the uniforms, equipment and other items required by today’s athletes. Our base model has a fully open front with fullwidth, 16-gauge steel shelf mounted 12 inches from the locker’s top. Two coat hooks and one clothes rod are secured below the shelf. Options, including our lock box and footlocker are also available.

Use WireCrafters Gear Lockers to stow and organize first responder’s gear and equipment. Our open-front Gear Lockers have mesh side walls to allow adequate ventilation of locker contents. The base model is constructed of a 16-gauge steel frame, back, top and bottom, with our tough 2” x 1”, 10-gauge wire mesh welded onto the side wall frames. A heavy load capacity, 16gauge steel shelf is mounted 12” from the top of the locker with two coat hooks and a coat rod secured below.

WireCrafters Shop Lockers provide secure but visible storage for your tools and equipment, inventory, or other valuable items. The locker’s wire mesh door and sides keep items secure while allowing for easy visual inspection of locker contents. This heavy-duty unit features a threepoint locking door, key lock and three full-width, 16gauge galvanized steel shelves. Shop lockers can be provided as a standalone design or as multiple, side-byside units. Our sales staff can help you design many configurations.

See reverse for more about locker specs and options.

3

Lockable plated handle controls three-point locking door


Locker Specs ®

Sport, Gear and Shop Lockers

STORAGE LOCKER SPECS MATERIAL SPECIFICATIONS All frames, dividers, and angle supports shall be punched with slotted holes for anchoring and assembly. Woven wire mesh shall be securely welded to all frames. DOOR PANELS Shall be framed in 1-1/4” x 1-1/4” x 1/8” angle with doors pre-hung at the factory. Single tier doors constructed with two diagonal and one horizontal stiffener of 1/4” x 3/4” flat bar behind mesh securely welded into a 1-1/4” x 1-1/4” x 1/8” frame. Double tier doors shall have a single diagonal stiffener behind the mesh. All doors supplied with door strikes, padlock lugs, and 2-1/2” x 2-1/2” spun-pin hinges welded in place. WALL PANELS Shall be framed on three sides with 11/4” x 1-1/4” x 1/8” steel angle, a 1/8” x 3” steel flat bar completes the frame. WOVEN WIRE MESH Shall be made of 10-gauge carbon steel wire inter-crimped and woven into 1” x 2” opening rectangular mesh. DIVIDERS Shall be formed 16-gauge galvanized sheet metal fastened to a 1-1/4” x 1-1/4” x 1/8” angle support. Divider provided with double tier units; optional on single tier units. BACKS (Optional) Shall be 16-gauge galvanized sheet metal. TOPS (Optional) Sized to cover one or more lockers, shall be of same construction as door panels.

4

BOTTOMS (Optional) Shall be 7/8” extruded vinyl profile (white only). HARDWARE Shall be 3/8” standard thread grade two plated nuts and bolts; 3/8” mechanical anchors for wall and floor mount-provided. FINISH All non-plated parts shall receive one prime coat of gray enamel.

SPORT, GEAR & SHOP LOCKER SPECS LOCKER SPECIFICATIONS Overall Dimensions: 72” high, 22” deep, and are available in widths of 24” or 33”. CONSTRUCTION All parts made from sheet steel shall be free from surface imperfection. Locker components shall be fabricated square, rigid, and without warp.

TOPS AND BOTTOMS Tops and bottoms shall be 16-gauge steel with three sides formed 90 degrees and the front offset formed so as to be flush with the vertical frame members upon final assembly. SHELVES Shelves shall be 16-gauge steel with four sides formed to 90 degrees, and punched with holes for mechanical fastening to adjacent parts. VENTILATION (Sport and Gear Lockers only) For maximum ventilation the locker has an open front and woven wire side panels. FINISH One coat of acrylic enamel. Optional powder coat finish available. Select colors from manufacturer chart. OPTIONAL SECURITY BOX (Sport and Gear Lockers only) Lockable security box shall be 16-gauge steel door, mounted to locker side wall with continuous hinge, and 16-gauge steel wall panel, mounted to shelf and top. Key lock provided.

SIDE WALLS (Sport and Gear Lockers only) Side wall components combine 2” x 1” opening 10-gauge woven wire mesh securely welded to 16-gauge steel panel OPTIONAL FOOTLOCKER formed for added strength and rigidity. (Sport Locker only) Lockable foot locker shall be 16-gauge SIDE WALLS (Shop Locker only) steel front punched with slotted holes All locker side wall panels are construct- for ventilation, and 16-gauge reinforced ed of 2” x 1” opening 10-gauge woven formed seat hinged at 14” from the wire mesh securely welded to a 1-1/4” x front, fitted with padlock hasp for 1-1/4” x 1/8” angle frame. securing to front panel. Padlocks not provided. BACK WALLS Back walls shall be 16-gauge steel punched with holes for mechanical fastening to adjacent parts.


SECURED STORAGE • Holding Cells • Evidence and Ordnance Storage • Gear Storage


HOLDING CELLS

L O C K S WireCrafters standard mortise cylinder lock (pictured top left), a self-locking device with spring action tongue, can be used in many applications. We also offer a dead bolt style lock, and a high security totally concealed self-locking/dead bolt lock (pictured bottom left). Top and bottom slide bolts may be also added to the door. Customer specified locks may be integrated into the system as well.

H O L D I N G C E L L S WireCrafters woven wire panel system is used to build prisoner holding cells in correctional and detention centers across the country. Our modular sized panels can be used to construct nearly any size enclosure. Generally a four-sided cell with 3’ x 7’ hinged door and ceiling is installed. Two or three sided cells may be installed where existing building walls are secure. If a wire ceiling is not desired, the wall panels may be built to reach the building ceiling. Holding cells require the assembly hardware to be installed on the outside of the enclosure. For added security, our heavy 3/8” hardware may be brazed, tack welded, or pinned.

B E N C H E S Anchorable 10 gauge steel benches Heavy Duty Options may be added to the cell or purThe system standards may be upgraded with any of the chased separately. An optional 1” following: diameter handcuff rail may be added for prisoner lockdown. • Heavier 1-1/2” x 1-1/2” 8 gauge woven wire mesh. • Tamperproof assembly hardware. Features include: • Larger 1-1/2” x 1-1/2” x1/8” steel angle panel • Seat: 10” wide, formed 10 frames. gauge sheet metal. • Legs: Pedestal-style, welded 2” x 2” x 14 gauge steel. • Mounting plates: 4” x 9” plates with four 1/2” anchors. • Lengths: 4’-0”, 6’-0”, and 8’-0”. • Corner pieces available. • Options: Seat width, bench length, mounting brackets. Handcuff Rail A 1” diameter steel pipe may be added to the bench for prisoner lockdown (pictured above). The pipe is securely welded on both ends and centered 2-1/2” from the face side of the bench. If a full-length rail is not desired, single forged steel eyelets can be placed at customer specified positions along the face of the bench.

T H E S Y S T E M WireCrafters woven wire partition system uses twenty standard size panels and three standard height posts. The panels are four or five feet tall, install horizontally between the posts, and stack one on top of the other to reach full partition Stock Panel 4 Ft. High Part No. 104 94 84 74 64 54 44 34 24 14

2

Width x Height 10’-0” x 4’-0” 9’-0” x 4’-0” 8’-0” x 4’-0” 7’-0” x 4’-0” 6’-0” x 4’-0” 5’-0” x 4’-0” 4’-0” x 4’-0” 3’-0” x 4’-0” 2’-0” x 4’-0” 1’-0” x 4’-0”

Weight (lbs.) 63 58 53 46 41 36 31 23 18 13

height. Panels are stocked in lengths from one to ten feet, in one-foot increments. Posts are stocked in nominal 8’, 10’, and 12’ heights. Ceilings can be added to any enclosure using standard size panels. All assembly hardware, including floor anchors, is supplied. Stock Panel 5 Ft. High Part No. 105 95 85 75 65 55 45 35 25 15

Width x Height 10’-0” x 5’-0” 9’-0” x 5’-0” 8’-0” x 5’-0” 7’-0” x 5’-0” 6’-0” x 5’-0” 5’-0” x 5’-0” 4’-0” x 5’-0” 3’-0” x 5’-0” 2’-0” x 5’-0” 1’-0” x 5’-0”

Weight (lbs.) 74 68 63 54 48 42 36 27 22 16


Typical applications are: • Evidence rooms • Munitions storage • Office file archives • Tool storage • Maintenance cages • Motor pool parts areas • Tactical gear storage

Part No. RP-8 CP-8/TP-8 RP-10 CP-10/TP-10 RP-12 CP-12/TP-12

Type Run Corner/Tee Run Corner/Tee Run Corner/Tee

Adjustable Panels Part No. AP8 AP10

Service Window Part No. SW48P

G E A R S T O R A G E Create smaller individual storage areas with WireCrafters Storage Lockers. These three or four foot wide storage lockers may be ordered with or without doors. There are two styles, single or double tier, to choose from. The lockers may be installed individually or in groups. All models are good for storage of gear assigned to specific individuals. Typical applications are: • Med/Tech Equipment Storage • Oxygen Tanks • Uniforms • P rotective Gear

• Miscellaneous Equipment • And even, dog food for Sparky the fire dog!

Storage Locker Specifications The storage locker design differs slightly from WireCrafters line of woven wire partitions.

This strong, versatile partition system is easily reconfigured to meet future needs. It can be expanded as your department grows.

Stock Size Post

GEAR STORAGE

SECURITY STORAGE

S E C U R E D S T O R A G E WireCrafters woven wire panel system is ideal for creating secured storage areas. Rooms of any size or height can be constructed from our twenty standard size panels. A full line of hinged and sliding gates are available to meet your requirements. Customer designed, and standard slide-up service windows with counter are available for controlled issue stations.

Height 8’ 5-1/4” 8’ 5-1/4” 10’ 5-1/4” 10’ 5-1/4” 12’ 5-1/4” 12’ 5-1/4”

Weight (lbs.) 20 21 23 24 33 33

Width x Height 1’- 2 3/ 8” x 8’- 0” 1’-2 3/8” x 10’-0”

Weight (lbs.) 27 33

Width x Height 4’- 0” x 8’- 0”

Weight (lbs.) 96

Woven Wire Mesh – shall be made of (.135) 10 gauge c1008 carbon steel wire intercrimped and woven into a 1” x 2” opening mesh. Door Panels –Hinged type framed in 11/4” x 1-1/4” x 1/8 steel angle and prehung in mounting frames at the factory. Single tier doors have one horizontal stiffener bar of 1/4” x 3/4” flat behind the mesh. All doors are supplied with door strikes, padlock hasps, 2-1/2” x 2-1/2” spun pin hinges welded into place. Wall Panels – shall be framed on three sides with 11/4” x 1-1/4” x 1/8 steel angle, a 1/8” x 3” steel flat completes the frame. Double tier lockers have horizontal stiffeners that support divider panels.

D O O R S The system offers hinge doors in 3’ and 4’ widths; dutch doors in 3’ and 4’ widths; double hinged in 6’ and 8’ widths; and sliding doors in 3’ to 10’ widths.

Stock Size Doors Part No.

HD-37-8 HD-47-8 HD-37-10 HD-47-10 SD-38-8 SD-48-8 SD-58-8 SD-68-8 SD-88-8 SD-108-8 SD-410-10 SD-510-10 SD-610-10 SD-810-10 SD-1010-10

Opening Width x Height 3’-0” x 7’-3 1/4” 4’-0” x 7’-3 1/4” 3’-0” x 7’-3 1/4” 4’-0” x 7’-3 1/4” 3’-0” x 8’-0 1/4” 4’-0” x 8’-0 1/4” 5’-0” x 8’-0 1/4” 6’-0” x 8’-0 1/4” 8’-0” x 8’-0 1/4” 10’-0” x 8’-0 1/4” 4’-0” x 10’-0 1/4” 5’-0” x 10’-0 1/4” 6’-0” x 10’-0 1/4” 8’-0” x 10’-0 1/4” 10’-0” x 10’-0 1/4”

Transom Weight Height (lbs) 1’-0” 115 1’-0” 128 3’-0” 132 3’-0” 149 Track (3”) 136 Track 149 Track 159 Track 219 Track 255 Track 315 Track 185 Track 204 Track 262 Track 307 Track 375

3


S TA N DA R D

S P E C I F I C A T I O N S

P A N E L S Panels are constructed of 10 gauge (.135) steel wire, woven into 2” x 1” rectangular mesh and securely welded to a 1-1/4” x 1-1/4” x 1/8” steel angle frame. Frames have 7/8” x 7/16” slotted holes for mounting to posts and adjacent panels. Panels four to seven feet wide have one 1/4” x 3/4” stiffener welded to the frame. Wider panels have two stiffeners. P O S T S Posts are made of 2” x 2” x 14 gauge (.083) steel tubing. Base plates of 2” x 7” x 1/4” steel flat with two 7/16” round holes for floor anchoring, are welded to each. A decorative cap is provided for each post. Posts are drilled with 1/2” holes to accept hardware for mounting panels and doors. Hole spacing is set to leave a 3-1/4” sweep space below the panels. Posts have a 2” projection above panels.

D O O R S Doors are constructed of 10 gauge (.135) steel wire, woven into 2” x 1” rectangular mesh and securely welded to a 1-1/4” x 1-1/4” x 3/16” steel angle frame. Stiffeners, two horizontal and one vertical, of 1/4” x 3/4” steel flat are securely welded to the frame behind the mesh. Two gate posts, hardware, and padlock lugs are supplied with each door. Cylinder locks available. H A R D W A R E All erection hardware is supplied. Panel mounting hardware is 3/8” standard thread grade two plated fasteners. Floor anchors are 3/8” wedge type. F I N I S H Nonplated parts receive one coat of gray acrylic enamel. Touch up paint is included with each order. Other colors are available – request our color chart. P R I C I N G To receive a price on WireCrafters products: • Sketch the area to be enclosed noting overall measurements. • Mark the location of all doors and windows. • List the type of door lock required – cylinder, padlock, etc. (Note if cylinder locks are to be keyed alike or different.) • State the desired partition height. • Indicate if ceiling is desired. • Note the construction of adjacent walls and floor. • List the zip code of the ship-to destination. • F ax the sketch to WireCrafters (502/361-3857) `or call us toll-free at 800/626-1816 and describe the layout. We look forward to working with you!


STYLE

®

840

W O V E N

W I R E

P A R T I T I O N S

it’s what you make of them!

more gr eat ideas ins ide…


Style 840

The amazingly versatile woven wire partition.

System Benefits

Index

Style 840 System Benefits . . . . . . . . .1 Panels & Posts . . . . . . . . . . . . . . . . .2 Hinged Doors . . . . . . . . . . . . . . . . . .3 Doors & Windows . . . . . . . . . . . . . . .4 Ceilings and Door Openers . . . . . . . . .5 Standard Locks . . . . . . . . . . . . . . . . .6 Custom Locks . . . . . . . . . . . . . . . . . .7 Pallet Rack Back . . . . . . . . . . . . . . . .8 Pallet Rack Enclosures . . . . . . . . . . . .9 Physical Barriers . . . . . . . . . . . . . . .10 Alternative Materials . . . . . . . . . . . .11 Also Available: MezzaRail Mezzanine Railing . . . .12 Storage Lockers . . . . . . . . . . . . . .12 DEA Storage Cages . . . . . . . . . . . .12 Estimating Worksheet . . . . . . . . . . .13 Style 840 Specs . . . . . . . . . . . . . . . .14 Color Chart . . . . . . . . . . . . . . . . . . .14

1

The Proven Style of Today’s Wire Partition For over 35 years, Wire Crafters has manufactured what we feel is the “Very Best Woven Wire Partition.” Contrary to traditional systems, our Style 840 is based on the simple idea that panels stack one on top of the other between tubular posts to reach the finished partition height. This all-welded, modular, stackable system has benefits unequaled in the industry.

The Style 840 Solution • MODULAR DESIGN Twenty basic panels and our “building block” approach accomplish virtually any layout.

• F AST INSTALLATION Fewer parts than standard partition systems. Angle frames give clear access to all mounting hardware.

• S TRONG Panels bolt directly to support posts. Standard 3/8” wedge anchors hold partition firmly in place. Base plates welded on posts allow direct floor anchoring.

• CLEAN DESIGN Straight lines and clean exterior makes a handsome finishing touch.

• SECURE Utilizes the heaviest assembly hardware in the industry. Bolts are only accessible from inside.

Stock items are available for shipment within 48 HOURS OF YOUR ORDER.

• FLEXIBLE Easy to reconfigure as needs change.


Panels & Posts

Simple, economical, modular design

Panels STACKABLE PANELS

MODULAR PANELS • Ten widths, 1’ to 10’ in one foot increments. • Two heights: 4’-0” and 5’-0”. • Full height partition walls are built by stacking two or more panels between posts. • Mesh: 10 gauge wire woven into 2" x 1" rectangular openings. • Frame 1-1/4" x 1-1/4" x 1/8" steel angle. • Custom size panels available. • Alternate meshes available, see page 11. ADJUSTABLE PANEL • Solid sheet metal panel. • Fill small gaps in runs. • Allows for adjustment from 1" to 11" . • Ideal for hard to measure areas. • Two heights: 4' and 5' match panel heights.

WOVEN WIRE PANELS 4 FT. HIGH Part No. Width x Height Weight 104 10’-0” x 4’-0” 63 94 9’-0” x 4’-0” 58 84 8’-0” x 4’-0” 53 74 7’-0” x 4’-0” 46 64 6’-0” x 4’-0” 41 54 5’-0” x 4’-0” 36 44 4’-0” x 4’-0” 31 34 3’-0” x 4’-0” 23 24 2’-0” x 4’-0” 18 14 1’-0” x 4’-0” 13 WOVEN WIRE PANELS 5 Ft. High Part No. Width x Height Weight 105 10’-0” x 5’-0” 74 95 9’-0” x 5’-0” 68 85 8’-0” x 5’-0” 63 75 7’-0” x 5’-0” 54 65 6’-0” x 5’-0” 48 55 5’-0” x 5’-0” 42 45 4’-0” x 5’-0” 36 35 3’-0” x 5’-0” 27 25 2’-0” x 5’-0” 22 15 1’-0” x 5’-0” 16 ADJUSTABLE PANEL Part No. Width x Height Weight AP4 1' 3-7/8" x 4' 0" 13 AP5 1' 3-7/8" x 5' 0" 16

ADJUSTABLE PANEL

RUN POST INSIDE VIEW

CORNER POST OUTSIDE VIEW

TEE POST INSIDE VIEW

Posts

BASE PLATE DETAIL

POSTS • Stock sizes: 8’-5 1/4”, 10’-5 1/4”, 12’-5 1/4”. • Standard hole layout allows for 3-1/4” sweep-space. • P osts project 2” above top of panel. • Standard Baseplate: 2” x 7” with holes for anchors. • Special length posts are available to 40’. • Oversized baseplates are available. • Floor anchors (3/8”) are included with your order.

2

STOCK SIZE POST Part No. Height RP-8 Run 8’-5-1/4” CP-8/TP-8 Corner/Tee 8’-5-1/4” RP-10 Run 10’-5-1/4” CP-10/TP-10 Corner/Tee 10’-5-1/4” RP-12 Run 12’-5-1/4” CP-12/TP-12 Corner/Tee 12’-5-1/4”

Weight 20 21 23 24 33 33


Hinged Doors

Secured Access to Your Storage Areas

HINGED DOOR

HINGED DOORS • 3’ or 4’ wide by 7’ 3-1/4” high opening. • Transom panel sized to match partition height. • Three 4” x 4” 10 gauge tight pin hinges. • P adlock lugs standard, cylinder locks available. • Complete with two door posts and hardware. • Universal construction, works for left or right hand, inside or outside swing.

DOUBLE HINGED DOORS • 6’ or 8’ wide by 7’ 31/4” high opening. • Inactive leaf secured by cane bolt (base) and chain bolt (top). • P adlock lugs standard, cylinder locks available.

S T Y L E HINGED DOORS

DUTCH DOOR

DOUBLE-HINGE DOOR

8 4 0

• Complete with two door posts and all hardware. • Transom panel sized to match partition height. • Custom size and no over head obstruction doors available.

W O V E N

W I R E

DUTCH DOORS Same as Hinged Door except: • Two separate operating door leafs. • Bottom leaf locks with padlock, cylinder lock available. • Top leaf locks to bottom with spring bolt. • 10 gauge shelf, 18” deep x door width fixed to bottom leaf. • Must specify hand and swing of door.

D O O R S

Part No.

Opening Width x Height Weight

DOUBLE HINGED DOORS Opening Part No. Width x Height Weight

Part No.

HD-37-8 HD-47-8 HD-37-10 HD-47-10

3’-0” x 7’-3 1/4” 4’-0” x 7’-3 1/4” 3’-0” x 7’-3 1/4” 4’-0” x 7’-3 1/4”

DHD67-8 DHD87-8 DHD67-10 DHD87-10

DD37-8/Swing Out DD47-8/Swing Out DD37-10/Swing Out DD47-10/Swing Out

106 118 123 139

3

6’-0” x 7’-3 1/4” 8’-0” x 7’-3 1/4” 6’-0” x 7’-3 1/4” 8’-0” x 7’-3 1/4”

170 193 190 217

DUTCH DOORS

Opening Width x Height Weight 3’-0” x 7’-3 1/4” 4’-0” x 7’-3 1/4” 3’-0” x 7’-3 1/4” 4-0”’ x 7’-3 1/4”

125 142 145 166


Doors & Windows

A Wide-Range of Products to Fit Your Needs SLIDING DOORS • 3’, 4’, 5’, 6’, 8’ or 10’ widths. • Full height partition openings of 8' and 10'. • P adlock lug standard, cylinder lock available. • Complete with two door posts, two 4 wheel trolley trucks, 16 gauge track, and all hardware. • Universal construction, works for left/right hand, inside/outside. • Custom sizes available. Inset Photo: Our patented tamperresistant sliding gate receiver. U.S. Patent # 6196034B1

SLIDING DOOR

STYLE 840 WOVEN WIRE DOORS

SLIDING DOORS Part No.

Width x Height

Weight

SD-38-8 SD-48-8 SD-58-8 SD-68-8 SD-88-8 SD-108-8 SD-310-10 SD-410-10 SD-510-10 SD-610-10 SD-810-10 SD-1010-10

3’-0” x 8’-1/4” 4’-0” x 8’-1/4” 5’-0” x 8’-1/4” 6’-0” x 8’-1/4” 8’-0” x 8’-1/4” 10’-0” x 8’-1/4” 3’-0” x 10’-1/4” 4’-0” x 10’-1/4” 5’-0” x 10’-1/4” 6’-0” x 10’-1/4” 8’-0” x 10’-1/4” 10’-0” x 10’-1/4”

124 137 149 196 230 279 149 168 185 234 277 334

TUNNEL DOORS • Designed for no overhead obstruction. • Leading edge of door rolls on floor casters. • Rear of door hangs from door track. • All sizes made to order. • Ideal for high traffic areas, and overhead crane access.

TOP VIEW

ELEVATION TUNNEL DOOR

SERVICE WINDOWS • Lockable, slide-up window secures opening when unattended. • Window opening: 24” wide x 201/2” high. • Shelf size: 24” wide x 18” deep x 10 gauge. • Shelf height: 42-1/4” off of floor level. • P anel size: 4’-0” wide x 8’-0” high; transoms extend height to 10’ or 12’. • Counter balanced, hinged, or mechanically operated windows in various sizes are available. SERVICE WINDOW

4


Ceilings & Openers CLEAR-SPAN CEILINGS • Ceiling panels interchangeable with wall panels. • A ttach to partition walls with slotted angle. • Clear spanned up to 35'. • Large ceilings supported by horizontal ceiling tubes. • Add to existing partition without changing layout. • All ceilings are non-load bearing. • Ceiling cutouts or drop down doors available.

VERTICAL RISE GATES • Sized to customer requirements. • Gate slides up an out of the way. • Counter balanced, pneumatic, and electric operators available. • Often used with vertical lifts. • Can be integrated with automated storage/retrieval systems.

DOOR OPENERS AND SELF-CLOSING GATES ELECTRIC DOOR OPENER Uses standard 110 volt single phase electric motor with rack and pinion drive. Supplied with radio frequency remote controls, self closing timer, anti-crush safety switch, and photo eye safety switch. stationary push button control, electro-magnetic locks optional.

PNEUMATIC DOOR OPENER Requires facility supplied compressed air of 40psi. Cylinders operated by stationary palm button, lever valve, or electric solenoid. Works with vertical rise or slide to side gates. HINGE DOOR CLOSER Commercial grade hydraulic door closer causes door to close and latch upon release. SELF CLOSING SLIDING GATES Requires no external power source. Counter balanced weight and pulley system closes and locks gate upon release.

5

Integrated Vertical Rise Gate and Conveyor System


Standard Locks

ALTERNATE FRONTSwork with any of the three backs shown below.

(SF-2) Thumb-Turn Latch… latches only, does not lock.

(SF-3) Door Knob Entry… latches only, does not lock.

ALTERNATE BACKS work with any of the locks show to the left.

ALTERNATE

STANDARD BACK (SB-1)

BACKS

ALTERNATE

STANDARD FRONT (SF-1)

FRONTS

Standard Fronts and Backs Ship Within 48-Hours.

(SB-2) Interior Key… (SB-3) Door Knob… lock from both sides, typical size door knob keyed to match face side. for easy exit.

(SB-4) Lever Handle... alternative to standard door knob. Meets ADA requirements.

Put our lock “Know-How” to the test!

keying options

Let us know if you need a special locking device. We have experience with many different lock styles. Let us put our experience to work for you. Call toll-free today for more information, or contact the WireCrafters dealer nearest you. Call 800-626-1816!

STANDARD CYLINDERS: • Standard locks are supplied keyed different. • Keyed alike locks available • Optional Master Key available ALTERNATE CYLINDERS: • Best Cylinder® Less Core • Any 1” mortise cylinder

6


Custom Locks

Makes a Great Product…Even Greater.

ELECTRICAL LOCKING DEVICES

LEVER HANDLES

(CE-1) Coded Card Reader …activates electric strike or magnetic lock upon insertion of coded card. Ten cards supplied. Requires key pad controller for card activation. Card readers available on hinged and sliding gates. (CE-2) Ten-Digit Key Pad…operates electric strike or magnetic lock upon entry of four-digit pass code. Programmable up to 64 different codes. Numeric key pads available on hinged and sliding gates.

(CF-1) Master Lock ® ADA Handle…meets ADA requirements, available with or without key lock. (Key Lock shown)

(CB-1) Master Lock ® ADA Handle …meets ADA requirements, available with or without key. (Twist button lock shown)

(CF-2) Five-Button Coded Access Lock …code or key entry. Match with push paddle or thumb turn knob inside.

(CB-2) Push Paddle …handsized paddle forquick exit. Match with key or five-digit push button lock.

CODED ENTRY

(CE-3) ElectroMagnetic Lock …magnetically locks sliding gates securely closed. Requires card code reader, ten-digit key pad or remote push button to operate. Available for sliding gates only.

OTHER BACK OPTIONS

(CE-4) Electric Strike …allows hinged gates to open when activated by encoded card, ten-digit key pad, or remote push button. Works with standard key locks. Available on hinged gates only.

7

(CB-3) Push Bar…push bar runs full width of door. Match with key or fivedigit push button lock. (CB-4) Alarm Lock…sounds battery powered alarm when opened. Available with or without exterior key access.


Rack Back

TM

Pallet Rack Backing

“BACK ANY RACK” WITH WIRECRAFTERS MODULAR PANEL SYSTEM. Sturdy framed panels provide hasslefree installation by bolting directly to rack uprights with our right angle mounting brackets. Panels may be extended above the rack with our “above-the-top” extension supports.

• Mounting brackets bolt directly to rack uprights, panels bolt to brackets. • Off-set brackets allow for load to overhang rack beams. • Creates sturdy barrier between stocked items and the ground below. • Sy stem installs quickly, with standard nuts and bolts. • P anels may be extended above the last beam to contain top loads. • Backing may be started at floor, or at any level where protection is required. • P revents spills into walkways and other personnel areas.

RACK BACK™ is easy to order

POPULAR RACK BACK PANEL SIZES

B G

Panels stocked in 1’ wide increments. Custom sizes available – Call for details. Four brackets per panel are required for installation.

D

FOUR FOOT PANELS

F

Part No.

Width x Height

Weight

124

12’-0” x 4’-0”

77

104

10’-0” x 4’-0”

63

94

9’-0” x 4’-0”

58

84

8’-0” x 4’-0”

53

E A

C

Fax or call with the following information and we’ll fax back a quote and layout drawing in no time – most always on the same day. A Beam width between rack uprights B Upright width C Overall number of bays D Required offset dimension from upright to panel (to allow for pallet overhang) E Mounting height above floor (if not flush-to-floor) F Overall height of rack uprights G Desired backing height

SLOTTED ANGLE SLOTTED ANGLE BRACE

FIVE FOOT PANELS Part No.

Width x Height

Weight

125

12’-0” x 5’-0”

90

105

10’-0” x 5’-0”

74

95

9’-0” x 5’-0”

68

85

8’-0” x 5’-0”

63

TOP OF RACK

PANEL

OFF-SET MOUNT BRACKETS Panels mount to the pallet rack upright with an offset bracket. Mounting brackets from flush mount to 12" off-set available. Four brackets are required per panel.

8

ANGLE CLIP

END VIEW

“ABOVE THE TOP” EXTENSION Contain loads stored on the top beam. Angle supports extend above the rack, anchoring the RACK BACKTM panel securely in place.


Rack Enclosures

Pallet Rack Back TM Enclosures

COMPLETELY ENCLOSE YOUR PALLET RACK SYSTEM AND SECURE INVENTORY! It’s so simple to add extra security to your pallet rack system with WireCrafters hinged and sliding gates. Control access and prevent inventory theft with our pallet rack enclosures. CUSTOM DESIGNED GATES. Due to the wide-array of sizes available, our in-stock sliding and hinged gates work for nearly every pallet rack application. When your project calls for a special size, we offer custom design and manufacturing.

Gates

PALLET RACK SLIDING GATES • Ideally suited for multi-bay application • Our unique “double track” system keeps doors out of your way, and aisles clear of obstruction • Full height doors available up to 20-feet tall • Locking options available for added security.

9

RACK ENCLOSURES SECURE INVENTORY A RackBack enclosure will control access to, and help prevent theft of, your high valued inventory items. A complete enclosure consists of panels on the back, ends, and top of the rack, with access gates on the front. Different configurations may be installed according to your specific needs.

PALLET RACK DOUBLE HINGED GATES • Ideally suited for single bay applications • Mount directly to the rack uprights • Full height doors available up to 20-feet tall • Locking options available for added security.


Physical Barriers

Adds Safety to the Workplace

Weight 74 69 63 54 48 42 36 27 22 16

The sizes listed are stock items. Custom sizes available.

POSTS Part No. RP6 CP6

Height 6’-2” 6’-2”

Sweep Space 1’-0” 1’-0”

GATES Part No. HD3 HD4

Opening Width 3’-0” x 5’-0” 4’-0” x 5’-0”

Type Hinged Hinged

Physical Barriers

STANDARD 5’ HIGH PANELS Part No. Width 105 10’ 95 9’ 85 8’ 75 7’ 65 6’ 55 5’ 45 4’ 35 3’ 25 2’ 15 1’

TYPICAL ELEVATION

TOP VIEW OF ADJUSTABLE MOUNTING

10

PHYSICAL BARRIER

BARRIER WITH WELD CURTAINS

DIAMOND STYLE BARRIER

ALUMINUM EXTRUDED FRAMES

PHYSICAL BARRIERS Woven wire panels provide a simple but effective way to protect personnel from the dangers of automated equipment. The versatility our Style 840 System allows us to meet many different customer demands while using standard product. Various heights, sweep spaces, lift out sections, non-right angle corners, heavy mesh, lexan panels, sheet metal panels, are all easily accomplished with our basic design. Some examples of our barriers are pictured above. Call us with your requirements.

OPTIONS • Weld curtains • Diamond Style Barrier • Aluminum Extruded Frame Barriers COLORS The Physical Barrier may be ordered in any color. Our standard color is gray. The combinations of yellow, or yellow and black shown are options.


Alternate Materials Choose from Special Meshes, Sheet Metal and Lexan

Other materials can be used when our standard 2" x 1" opening mesh does not meet your needs. WireCrafters stocks several different sized meshes, sheet metal, lexan, expanded metal and welded wire for these special applications. Several of

the more popular items are pictured below. Our large inventory and modern manufacturing techniques allow us to make fast delivery of custom product, giving you an edge on the competition.

WireCrafters can upgrade the panel frames to larger angle, and increase the tubing size of the posts to meet your exact requirements. We are experienced with these special projects and welcome them.

special mesh

1/2” center-to-center square 12 gauge (3/8” square opening) Uses: Any application which requires control over small items. • Machine guards • Small liquor bottles • F ederal Reserve • Drug control

1-5/8” center-to-center square 8 gauge (1-1/2” square opening) Uses: Galvanized partitions This heavy mesh eliminates warping which may occur during the hot dip galvanize process. Also used when our standard 2” x 1” 10 gauge is not strong enough.

2-1/4” center-to-center square 6 gauge (2” square opening) Uses: Heavy duty construction • Government facility import areas • Police holding cells • Prison lockup areas

2” center-to-center square 8 gauge welded wire mesh (1- 7/8” square opening)

3/4” center-to-center square 10 gauge (5/8” square opening)

1-1/2” diamond mesh 10 gauge

® sheet metal, lexan and expanded metal

EXPANDED METAL

16-GAUGE SHEET METAL

LEXAN® CLEAR VIEW PANELS

11


Also available

Unique Woven Wire Applications

DEA APPROVED between the partition ENCLOSURES and building structure When properly installed,may not exist. Doors Wire Crafters Style 840 must be self-closing Partitions meet or and self-locking; all exceed the requirehardware must be ments for storage of brazed, pinned or tack Class III, IV and V con- welded in place. For trolled substances as more information visit outlined in Section www.wirecrafters.com 1301:72 of the Code. For these applications the enclosure must be totally secure, gaps

Storage Lockers/Guard Rails

MEZZARAIL® MezzaRail sets up Wire Crafters combined quicker – just two bolts the strength of square per section – and acts handrail with the versa- as a barrier. Objects tility of woven wire par- that pass through a multi-rail system are tition to create a unique handrail for restrained by mezzanines. MezzaRail, MezzaRail. Meets BOCA and OSHA codes for designed to replace multiple rail systems, handrails. For more out performs them too. information request our MezzaRail brochure. With its built-in kick plate and top rail,

12

OPEN MESH LOCKERS

SHEET METAL LOCKERS

STORAGE LOCKERS Wire Crafters’ Woven Wire Storage Lockers are ideal for small enclosures. The units may be used individually or as a group. Two styles of lockers, single and double-tiered, are available in a variety of widths and

depths. Doors are prehung in angle frames which connect directly to wall panels. Twosided units fit in the corner of existing rooms. Free standing units may be installed anywhere. For more information ask for our Locker Brochure.

GUARD RAILS When Safety and Protection Matter… • Constructed from heavy-duty 11-gauge formed steel • Mounting columns are available in two styles – single rail (17” height) or double rail (43” height)

• Lift-out rails allow easy access to protected areas • Base plates, for mounting to floor, are 10” square and come with four 7/8” holes for floor anchors (included) • Rails are available in 2’, 4’, 6’, 8’, and 10’ lengths • Competitively priced


Worksheet Name

Height:

❐ ❐ ❐ ❐

Color:

❐ Standard Gray ❐ Other

Company Address City/State/ZIp Fax # Phone # Zip Code of Ship-To Destination

Standard 8’ 5-1/4” Standard 10’ 5-1/4” Standard 12’ 5-1/4” Other (please specify)

(please specify)

Ceiling:

❐ Yes

Locks:

❐ Padlock Lugs Only ❐ Cylinder Lock Keyed ❐ Alike ❐ Different ❐ Special Lock Device (please specify)

❐ No

TO RECEIVE A PRICE ON WIRECRAFTERS PRODUCTS • Photocopy this page, or go to www.wirecrafters.com/pricing.htm to download. • Complete the information to the left. • Sketch your layout below, note overall dimensions. • Mark the location, size, and type of all doors and windows. • Note construction type of adjacent walls and floor. • F ax to WireCrafters at 502-361-3857. • We will respond within one working day.


Style 840 Specs Standard Color

Gray

Optional Colors

Buff

specs

®

Panels, Posts, Doors, Hardware & Finishes PANELS Panels are constructed of 10 gauge steel wire, woven into 2” x 1” rectangular mesh and securely welded to a 11/4” x 1-1/4” x 1/8” steel angle frame. Frames have 7/8” x 7/16” slotted holes for mounting to posts and adjacent panels. Panels four to seven feet wide have one 1/4” x 3/4” stiffener welded to the frame. Wider panels have two stiffeners. POSTS Posts are made of 2” x 2” x 14 gauge (.083) steel tubing. Base plates of 2” x 7” x 1/4” steel flat with two 7/16” round holes for floor anchoring, are welded to each. Top of post is finished with decorative cap. Posts are drilled with 1/2” holes to accept hardware for mounting panels and doors. Hole spacing is set to leave a 3-1/4” sweep space below the panels. Posts have a 2” projection above the panels.

DOORS Doors are constructed of 10 gauge steel wire, woven into 2” x 1” rectangular mesh and securely welded 1-1/4” x 1-1/4” x 1/8” steel angle frame. Stiffeners, two horizontal and one vertical, of 1/4” x 3/4” steel flat are securely welded to the frame behind the mesh. Two gate posts, hardware, and padlock lugs are supplied with each door. Cylinder locks are available. HARDWARE All erection hardware is supplied. Panel mounting hardware is 3/8” standard thread grade two plated fasteners. Floor anchors are 3/8” wedge type. FINISH Nonplated parts receive one coat of gray acrylic enamel. Touch up paint is included with each order.

Yellow PLEASE NOTE… Representation of color is as close as printing techniques allow.

Blue

Flat Black


RapidWire

™ A Welded Wire Solution.

®


Rapid Wire™

A Welded Wire Solution.

Introducing RapidWire™ Machine Perimeter Guarding WIRECRAFTERS®...with nearly a half of century of experience in the safety and security markets, WireCrafters® and its tradition of quality, introduces the RapidWire system of welded wire machine perimeter guarding. Using this expertise we engineered the RapidWire™ system of welded wire machine perimeter guarding to be simple, strong and quick to install. The RapidWire system utilizes a modular design which allows for combinations of standard parts to meet your specific requirements. The system’s three basic components: framed panels, posts, and a wide variety of door styles, provide the flexibility to design and install any type of machine perimeter guarding required to make your robotic cell safe to use. Equipped with interlocks, light curtains, and pressure sensitive mats, WireCrafters can tailor make a system that meets your rigorous safety standards.

VERSATILE: RapidWire’s welded wire panels have superior strength because the panel’s wires are welded at each intersection, then framed top and bottom with 1-1/4” x 1-1/4” x 13 gauge roll formed angle. Although these panels are strong, every RapidWire panel can be field modified to fit exacting dimensional limitations making unforeseen adjustments easy to accomplish and look professionally finished. Rapid Wire’s superior design allows for easy relocation of the system should your needs change. VISUAL APPEAL: The symmetrical design of the welded wire mesh panel and post offers a pleasing look that never looks out of place. Welded wire’s straight lines and inherent strength provide a strong, modern looking guard to complement your facility and equipment.

2

SECURITY: By the nature of its welded wire design, RapidWire machine guarding system provides an unparalleled level of security. Strong 2” x 2” x 14 gauge tube posts compliment and reinforce the system. Panels mount to posts with wire sheaths and self taping screws. Hardware used with the system can not be defeated. Panels are constructed of 8 and 10 gauge wire welded into a pattern of 1-1/4” x 3”. For added structural integrity, each panel has a 13 gauge angle welded along its length. System height of 5’, 6’, and/or 8’, are available as standard. FAST INSTALLATION: RapidWire, with its modular design, can be installed in 20 to 25% less time when compared to competing products.


Rapid Wire

™ A Welded Wire Solution.

Machine Perimeter Guarding Specs FINISH: The RapidWire system undergoes a thorough finishing process which includes shot blasting to remove any scaly residue, and painted; posts yellow, panels black. Other colors and Powder Coating are options.

cess to secure areas by supporting door’s leading edge with floor casters and the rear of the door supported by sliding door track mounted to the system’s posts. All tunnel doors are framed in 1-1/4” x 11/4” x 13 gauge angle.

PANELS: 8 and 10 gauge wires are welded at each intersection to provide mesh patterns of 1-1/4” x 3”, 5/8” x 3” or 2” x 2”. Each panel is finished with two 1-1/4” x 1-1/4” x 13 gauge roll formed angles welded along its length. This unique design allows for the stacking of panels to the desired structure’s height. Panels are completely framed in place when connected to posts.

DOORS-DUTCH: Welded wire mesh consistent with the panel mesh is utilized to manufacture hinged Dutch type doors. Clear height of all Dutch style doors is 94” while systems taller than 8’ will be furnished with a transom panels to close off the open space above the door. All dutch doors are framed in 1-1/4” x 1-1/4” x 13 gauge angle.

POSTS: 2” x 2” x 14 gauge tubing is furnished with a 2” x 7” x 1/4” baseplate welded at its end. Standard heights of 6’ and 8’ are inventoried. Other heights available. DOORS–HINGED: Welded wire mesh consistent with the panel mesh is utilized in the door’s design. Doors can be hinged either right or left with both swings of in or out. Clear height of all doors is 2” less than that of the systems height. Doors are framed in 1-1/4” x 1-1/4” x 13 gauge angle. DOORS–SLIDING: Welded wire mesh consistent with the panel mesh is utilized to manufacture sliding doors. Single sliding doors are furnished with the patented tamper-resistant sliding door receiver. Paired sliding doors also available. All sliding doors are framed in 1-1/4” x 1-1/4” x 13 gauge angle. DOORS–TUNNEL: Welded wire mesh consistent with the panel mesh is utilized to manufacture Tunnel type sliding doors. Tunnel doors provide clear overhead ac-

3

DOOR LOCKS: All doors are furnished with a padlock hasp; standard built-in cylinder locks are available. Also available as options are various lever/knob styles, coded entry/ push lever, panic bars, coded card readers, numerical key pads, magnetic style locks and electric strikes. Also available as an option is keyed alike locks, Master keyed locks, Best cylinders less core and any 1” mortised cylinder. OPTIONS: Additional items to supplement and complete your Physical Barrier System are available from WireCrafters. They include: Interlocks and the mounting of this product to ensure ease of installation and operation. Weld curtains, manufactured per system requirements, to shield employees from harmful welding flash. Cable trays to organize the cells power cables. HARDWARE: All hardware needed for installation, including floor anchors is furnished as standard. WARRANTY: Five (5) years. Consult specific limited warranty statement.


Style 840

A Woven Wire Solution.

When only woven wire will do… Style 840 Wire Partitions from WireCrafters are a simple, effective way to protect personnel from the dangers posed by automated equipment. These barriers are a strong, reliable, and economical solution to plant safety needs. System versatility allows easy integration of access doors or material handling openings with system controls. Also doubles as a potential safety net by containing objects ejected by a malfunctioning robot. Our basic physical barrier system combines a 5’ high panel and 6’-2” high posts. Panels bolt to posts using standard 3/8” hardware. Configuration leaves 1’ sweep space beneath panel and a 2” projection above panel. Each post has a 4” x 9” x 3/8” baseplate for mounting to the floor. Four 3/8” anchors included with each post. Enclosures with odd-angle perimeters can be created with adjustable hardware. Three and four foot wide hinged doors are available.

STANDARD 6’-2” GUARD SYSTEM

POSTS

PANELS

TYPICAL ELEVATION

TOP VIEW OF ADJUSTABLE MOUNTING

Part No. 105 95 85 75 65 55 45 35 25 15

6’-2” POSTS, 5’ HIGH PANELS, 1’ SWEEP

Width x Height 10’-0” x 5’-0” 9’-0” x 5’-0” 8’-0” x 5’-0” 7’-0” x 5’-0” 6’-0” x 5’-0” 5’-0” x 5’-0” 4’-0” x 5’-0” 3’-0” x 5’-0” 2’-0” x 5’-0” 1’-0” x 5’-0”

Weight 74 68 63 54 48 42 36 27 22 16

Other standard heights are available.

4

Part No. RP6 CP6

Height 6’-2” 6’-2”

Sweep Space 1’-0” 1’-0”

Weight 18 18

DOORS Part No. Opening Width Type Weight HDR356 3’-0” x 5’-0” Hinged 81 HDR456 4’-0” x 5’-0” Hinged 86 (Each door supplied with two door posts and door hardware.)

Free design and layout assistance available. Call 800-626-1816.


K C A R K C A B


Pallet RACK BACK

Add SAFETY and SECURITY It’s simple with our modular RACK BACK™ woven wire systems!

nd

SAFELY CONTAIN AND PROTECT! Just don’t “catch the spill” – prevent it! Our RACK BACK™ panels bolt directly to your existing pallet rack uprights creating a sturdy barrier between inventory…and the ground below. Our durable, allwelded angle-frame design adds all the protection you need to prevent dangerous spills – protecting employees while containing inventory. SECURE YOUR INVENTORY. Add end panels and locking gates to your RACK BACK™ panels to create a complete pallet enclosure…designed to control access and prevent inventory theft. EVERY SIZE YOU NEED …READY TO SHIP! RACK BACK™ modular panels are stocked in 4- or 5foot heights with widths available to match any beam length. Plus, all stock items are ready-to-ship within 48-hours of your order!

a e f sa re secu

ABOVE, RACK BACK™ MOUNTS FLUSH-TO-FLOOR. BELOW, RACK BACK™ MOUNTS ABOVE FLOOR LEVEL.

and e saf re secu

ATTRACTIVE AND EASY TO INSTALL Installs simple and fast – providing several mounting options to fit your specific needs. And our clean, straight-line design makes for a very attractive warehouse area.

K C A R CK BA

“BACK ANY RACK” WITH WIRECRAFTERS MODULAR PANEL SYSTEM – OUR PANELS ARE: • Constructed from 2” x 1” 10-gauge woven wire mesh, welded into a 1-1/4” x 1-1/4” x 1/8” angle frame. • Stocked in 1-foot increments up to 10-feet wide. Wider panels available. • Stocked in 4- or 5-foot heights and stackable to any height. • Available with “above the top” extensions to safely contain stored items above the rack structure.


Pallet RACK BACK

WIRECRAFTERS, INC. • 800/626-1816 • LOUISVILLE, KY

“BACK ANY RACK” WITH WIRECRAFTERS MODULAR PANEL SYSTEM. Sturdy framed panels provide hassle-free installation by bolting

directly to rack uprights with our right angle mounting brackets. Panels may be easily extended above the rack with our “abovethe-top” extension supports.

Panel Mounting Options

RACK BACK™ Options SLOTTED ANGLE SLOTTED ANGLE BRACE TOP OF RACK

PANEL

ANGLE CLIP

END VIEW

FLUSH MOUNTED* RACK BACKS™ In the above photo, the RACK BACK™ is flush mounted directly to the pallet rack uprights.

OFF-SET MOUNTED* RACK BACK™ Panels mount to the pallet rack upright with an off-set bracket. Off-set brackets from 0”-12” available. Specify desired overhang when ordering.

RACK ENCLOSURES Completely surround your pallet rack with: • Left and Right End Panels • Top/Ceiling Panels • Sliding or Hinged Gates for the front

“ABOVE THE TOP” EXTENSION Contain loads stored on the top beam. Angle supports extend above the rack, anchoring the RACK BACK™ panel securely in place.

*NOTE: Four brackets per panel are required for installation.

Popular RACK BACK™ Panel Sizes

Five Foot Panels

Four Foot Panels Part No. Width x Height

Panels stocked in 1’ wide increments. Custom sizes available – Call for details. Four brackets per panel are required for installation.

K C A R K BAC

Weight

Part No. Width x Height

Weight

124

12’-0” x 4’-0”

77

125

12’-0” x 5’-0”

90

104

10’-0” x 4’-0”

63

105

10’-0” x 5’-0”

74

94

9’-0” x 4’-0”

58

95

9’-0” x 5’-0”

68

84

8’-0” x 4’-0”

53

85

8’-0” x 5’-0”

63

74

7’-0” x 4’-0”

46

75

7’-0” x 5’-0”

54

THE RACK BACK™ MODULAR PANEL SYSTEM… • Mounts directly to pallet racks…fast and easy. • Available in various widths and heights to accommodate any pallet rack configuration. • Adds safety and security to your pallet rack system. • Stock items ship within 48-hours of your order. • Fast quotation service. • Nationwide network of dealers and factory-owned warehouses.


Pallet Rack Gates COMPLETELY ENCLOSE YOUR PALLET RACK SYSTEM AND SECURE INVENTORY! It’s so simple to add extra security to your pallet rack system with WireCrafters hinged and sliding gates. Control access and prevent inventory theft with our pallet rack enclosures. CUSTOM DESIGNED GATES. Due to the wide-array of sizes available, our instock sliding and hinged gates work for nearly every pallet rack application. When your project calls for a special size, we offer custom design and manufacturing.

Part No. Pallet RACK BACK™ SD-68-8 SD-88-8 Doors

SLIDING

PALLET RACK SLIDING GATES • Ideally suited for mutli-bay application • Our unique “double track” system keeps doors out of your way, and aisles clear of obstruction • Full height doors available up to 20-feet tall • Locking options available for added security.

Opening Width x Height 6’-0” x 8’-01/4” 8’-0” x 8’-01/4” 10’-0” x 8’-01/4” 6’-0” x 10’-01/4” 8’-0” x 10’-01/4” 10’-0” x 10’-01/4”

SD-108-8 SD-610-10 SD-810-10 SD-1010-10

Weight 219 255 315 262 307 375

• • • •

PALLET RACK DOUBLE HINGED GATES Ideally suited for single bay applications Mount directly to the rack uprights Full height doors available up to 20-feet tall Locking options available for added security.

Part No. Pallet RACK BACK™ DHD-68-8-1 DHD-88-8-1 Doors

DOUBLEHINGED

Opening Width x Height Weight 6’-0” x 8’-03/4” 188 8’-0” x 8’-03/4” 213 DHD-108-8-1 10’-0” x 8’-03/4” 375 DHD-610-10-1 6’-0” x 10’-03/4” 208 DHD-810-10-1 8’-0” x 10’-03/4” 237 DHD-1010-10-1 10’-0” x 10’-03/4” 520

Double-sliding doors and custom sizes also available.

RACK BACK™ is easy to order Fax or call with the following information and we’ll fax back a quote and layout drawing in no time – most always on the same day.

B G D

F

E A

C

A B C D E F G

Beam width between rack uprights Upright width Overall number of bays Required offset dimension from upright to panel (to allow for pallet overhang) Mounting height above floor (if not flush-to-floor) Overall height of rack uprights Desired backing height

GET THE MOST FROM YOUR INVENTORY STORAGE! With great options like mounting extensions, end panels and gates you can maximize the use of your pallet rack storage system. Our sales representatives can help you develop a plan to best utilize your existing pallet rack. Call today for more information!


PO BOX 400 . 302 MCDOWELL . MURPHYSBORO, IL 62966

P 800.215.4999 C 618.687.3042 F 866.443.9862

WWW.1SOURCEMATERIALHANDLING.COM


WireCrafters