prEN 13638:2007 (E)
2
Normative References
This European Standard incorporates, by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated reference, the latest edition of the publication referred to applies. EN 287-1 (2004)
Qualification test of welders - Fusion welding - Part 1: Steels
EN 473 (2001)
Non-destructive testing - Qualification and certification of NDT personnel - General principles
EN 682 (2002)
Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
EN 1012-1 (1996)
Compressors and vacuum pumps; Safety requirements – Part 1: Compressors
EN 1127-1 (1997)
Explosive atmospheres - Explosion prevention and protection - Basic concepts and methodology.
EN 1964-1 (1999)
Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0, 5 litre up to and including 150 litres - Part 1: Cylinders made of seamless steel with an R<(Index)m> value of less than 1100 Mpa
EN 1964-2 (2001)
Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0, 5 litre up to and including 150 litres - Part 2: Cylinders made of seamless steel with an R<(Index)m> value of 1100 MPa and above
EN 10020 (2000)
Definition and classification of grades of steel
EN 10021 (1993)
General technical delivery requirements for steel and iron products
EN 10025-1 (2004)
Hot rolled products of structural steels - Part 1: General technical delivery conditions
EN 10025-2 (2004)
Hot rolled products of structural steels - Part 2: Technical delivery conditions for nonalloy structural steels
EN 10025-3 (2004)
Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
EN 10025-4 (2004)
Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
EN 10025-5 (2004)
Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
EN 10025-6 (2004)
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
EN 10027-1 (2005)
Designation systems for steels - Part 1: Steel names
EN 10027-2 (1992)
Designation systems for steel; numerical system
EN 10028-1 (2002)
Flat products made of steels for pressure purposes - Part 1: General requirements
8