Issuu on Google+

Call us at (84.8) 3897 8933 or email us at emmco@hcm.vnn.vn

ISO 9001:2008

SOUTHERN TRADING & PRODUCING ELECTRICAL EQUIPMENT COMPANY


How to turn your ideas into reality?

Let us help construct your ideas into reality


GREEN TECHNOLOGY FOR TODAY AND TOMORROW

SOUTHERN ELECTRICAL EQUIPMENT COMPANY


Company

Southern Trading & Producing Electrical Equipment Joint - Stock Company is established in the early of the year 2000, specialize in the manufacture of electrical equipment, power fittings, cable accessories and frp composite products. All products manufactured with brand name EMN are not only high quality products but also competitive prices. The product quality of EMN has been strictly controlled in each working procedure, many kinds of internationalization standard quality guaranteed system can be highly effective under company's strict monitoring. We obtained ISO 9001:2008 quality system and all products range have been fully tested to the requirement of IEC, ASTM standards or equivalent. EMN has always been holding the management doctrine on stable quality, environment friendly products, short delivery and rapid service. It constantly meets the demands of customers and market development and helps customers to finish most difficult tasks.

At EMN we offer a wide selection of high performance engineered composites to give you a product solution that you can trust to meet your most stringent material performance requirements:    

High mechanical strength, yet lightweight Resistance to corrosion, heat, flame, smoke and toxins Abrasion and impact resistance Excellent electrical insulation properties

We also offer a wide selection of configurations to meet your needs:      

Solid Rod & Bar Stock Structural Profiles Custom Profiles Strut Support Systems FRP Gratings FRP Systems

With the advanced equipments, high quality products, best prices and good after-sale services, our products have obtained domestic & oversea customers long-terms cooperation and support. We warmly welcome customers from all over the world and are looking forward to establishing a steady and long-term business relationships with you in the near future based on mutual benefits. Today, EMN continues to add capacity, diversify its product lines, increase engineering capability and improve its processes and products.

Quality You can also be assured that the fiberglass reinforced plastics products you receive from us are fully tested and meet the stringent requirements of ASTM. To ensure these standards are met through the entire manufacturing process, our facility is ISO 9001:2008 certified with design capabilities for its quality procedures.

ENVIRONMENTALLY FRIENDLY

Environmental Performance One of the outstanding advantages of EMN pultruded frp products is their ability to perform over long periods of time in a variety of environmental conditions. The civil engineering community is now looking at pultruded composites as an ideal replacement for many traditional materials in a wide range of industrial, commercial and residential applications.


The

ROVING CREEL

MAT CREEL

RESIN BATH

PREFORMER

DIE & HEAT SOURCE

PULLING SYSTEM

CUT-OFF SAW

HIGH STRENGTH

LIGHT WEIGHT

CORROSION RESISTANCE

NON – CONDUCTIVE

EMI & RFI TRANSPARENCY

Pultrusion is a manufacturing process for producing continuous lengths of fiber reinforced polymer (FRP) structural shapes with constant cross-sections. Raw materials are a liquid resin mixture (containing resin, fillers and specialized additives), continuous glass fiber filaments known as rovings, chopped filaments called continuous strand mat and a protective fabric known as surfacing veil. The pultrusion process involves pulling these raw materials (rather than pushing, as is the case in extrusion) through a heated forming & curing die using a continuous pulling system.

DIMENSIONAL STABILITY

PARTS CONSOLIDATION

EASY INSTALLATION

LOW MAINTENANCE

Reinforcing fibers consist of continuous strand mat and continuous strand roving. Coupling the reinforcing fibers with the resin and a surfacing veil, the pultrusion product is complete.

COMPOSITE STRUCTURE

ECONOMIC EFFICIENCY


COMPARISON FRP composites vs. traditional materials Is pultruded frp a better choice for your applications ? Consider the point-for-point comparison below.

FRP STRUCTURAL PROFILE

vs.

TRADITIONAL MATERIALS

STRUCTURAL TIMBER

STEEL

ALUMINUM

FRP Composites

Timber

Steel

Aluminum

Corrosion Resistance

High

Low

Low

Medium

Weight

Low

Medium

High

Low

Strength to Weight

High

Low

High

High

Expansion & Contraction

Low

Low (*)

Medium

High

Electrical Conductivity

Low

Moderate

High

High

Thermal Conductivity

Low

Low

High

High

EMI/RFI Transparency

Yes

Yes

No

No

Environmental Impact

Low

Low

High

High

Fabrication

Easy

Easy

Easy

Moderate

Life Cycle Cost

Low

High

Moderate

Moderate

(*)

Wood expands due to moisture absorption


PROPERTIES OF FRP COMPOSITES General properties In general, FRP composites are a combination of two or more materials yielding properties superior to those of the individual ingredients. A matrix resin alone is not structural and is brittle, while a reinforcement alone is flimsy, but together, they form a strong FRP composite. The region where the reinforcement and matrix meet is called the interface. Composite properties are determined by chemical and mechanical interaction of the combined materials. Plastic resins come in two different classes - thermosets and thermoplastics. From a practical perspective, it’s easy to remember that thermosets maintain their molded shape at higher temperatures and cannot be melted and reshaped. Thermoplastics will melt at a given temperature and can be solidified into new shapes by cooling to ambient temperatures. The plastic resin systems determine chemical, electrical, and thermal properties. Reinforcing fibers include glass, carbon, aramid and other man-made and natural materials that are used in a variety of forms and combinations to provide the required properties such as strength, dimensional stability, and heat resistance. Additives provide color and determine surface finish, and affect many other properties such as weathering and flame retardance. Final properties are determined by many factors including the type,amount and properties of the individual ingredients, especially the ratio of fiber reinforcement and matrix resin; the fiber orientation in the matrix; the surface interaction of fibre and resin (the 'interface') and quality control during manufacturing.

Typical reinforcement fiber and matrix resins properties

Material

Density (G/cm3)

Tensile Modulus(E) (Gpa)

Tensile Elongation Relative Strength (б) to break Cost (Mpa) (%)

2.54÷2.60 2.44÷2.49 1.70÷1.90 1.30÷1.45

69÷72 86÷90 240÷400 80÷130

3100÷3500 4500÷4900 3450÷6200 3000÷4100

4.5÷5.0 5.4÷6.0 0.7÷2.0 2.0÷2.8

Low Moderate High Moderate*

1.1 ÷ 1.4 1.1 ÷ 1.3 1.2 ÷ 1.4 1.2 ÷ 1.4

1.6 ÷ 4.1 2.0 ÷ 4.0 2.5 ÷ 5.0 2.7 ÷ 4.1

35 ÷ 95 50 ÷ 100 50 ÷ 110 55 ÷ 80

1.0÷2.5 3.0÷4.0 1.5÷4.0 1.0÷1.8

Low Moderate High Moderate

1. Fibers E-glass S-glass Carbon/Graphic Aramid 2. Resin matrix Polyester Vinylester Epoxy Phenolic

(*) slightly higher than S-glass - The above data are generic and do not apply to all commercially available products.


PROPERTIES OF FRP COMPOSITES Typical frp composites properties Pultruded Rod

Pultruded Profile

Pultruded Profile

Pultruded Profile

Fiber type

E-glass

E-glass

E-glass

E-glass

Resin type

Polyester

Polyester

Polyester

Vinylester

45 ÷ 75

40 ÷ 55

50

50

414 ÷ 827

172 ÷ 290

210

240

48

52

17.2

18.6

5.5

6.2

210

240

105

125

Longitudinal,GPa

18

20

Transverse, GPa

6.0

7.2

210

240

72

80

11.1

12.7

5.51

6.3

2.895

2.93

31.03

31.03

37.92

41.37

19.3÷22.06 8.5

19.3÷22.06 8.5

TYPICAL COUPON PROPERTIES Material

Nominal fiber % by weight

ASTM D-2584

Properties

Test Method

Mechanical Tensile Strength

ASTM D-638

Longitudinal,MPa Transverse, MPa Tensile Modulus

ASTM D-638

Longitudinal,GPa

20.6 ÷ 41.4 13.1 ÷ 18.6

Transverse, GPa Compressive Strength

ASTM D-695

Longitudinal,MPa

275 ÷ 483

Transverse, MPa Compressive Modulus

Flexural Strength

ASTM D-695

ASTM D-790

Longitudinal,MPa

414 ÷ 827

172 ÷ 290

Transverse, MPa Flexural Modulus

ASTM D-790

Longitudinal,GPa

20.6 ÷ 41.4 10.8 ÷ 14.4

Transverse, GPa Shear Modulus Longitudinal,MPa Shear Strength Short Beam

ASTM D-2344

Longitudinal,MPa Transverse, MPa Modulus of Elasticity Longitudinal,GPa Transverse, GPa

Full Section Bending


PROPERTIES OF FRP COMPOSITES Typical frp composites properties Pultruded Rod

Pultruded Profile

Pultruded Profile

Pultruded Profile

Fiber type

E-glass

E-glass

E-glass

E-glass

Resin type

Polyester

Polyester

Polyester

Vinylester

45 ÷ 75

40 ÷ 55

50

50

Longitudinal, J/mm

1.33

1.33

Transverse, J/mm

0.214

0.214

45

45

1.2x10-5

1.2x10-5

0.58

0.58

0.6max

0.6max

1.8

1.8

120

120

6

6

1.38

1.38

TYPICAL COUPON PROPERTIES Material

Nominal fiber % by weight

ASTM D-2584

Properties

Test Method

Physical Impact Strength Izod

Hardness, Barcol

ASTM D-256

ASTM D-2583

Perpendicular Coefficient of Thermal Expansion Longitudinal, /ºK

45 ÷ 60 ASTM D-696

Thermal Conductivity

ASTM C-177

W/ ( m. ºK ) Water Absorption 24 Hours

ASTM D-570

Longitudinal,% Density

0.2max ASTM D-792

Longitudinal, gms/cc

1.9 ÷ 2.0

1.7 ÷ 1.8

Electrical Arc Resistance

ASTM D-495

Longitudinal, sec Dielectric Strength

ASTM D-149

Perpendicular, kV/mm Longitudinal, kV/mm Flammability Flammability Flame Spread (UL Tunnel Test)

ASTM D-635 ASTM E-84

Self Extinguishing

Self Extinguishing

Self Extinguishing

Self Extinguishing

(*)

(*)

(*) 25 max

(*) 25 max

(*)

(*)

The above data is based on results achieved in the test methods indicated and is provided for information purposes only. (*) FRP composite products can be designed & manufactured to be fire retardant and self-extinguishing.


PULTRUDED FRP PROFILES Structural Profiles

EMN offers a wide range of pultruded structural components including angles channels, beams, tubes, bars, rods, flat sheets,‌ EMN structural shapes are used in a wide variety of applications, providing a unique combination of corrosion resistance, high strength, dimensional stability and light weight, along with thermal and electric nonconductivity.

SOLID ROD & BAR STOCK

STANDARD STRUCTURAL PROFILES

Solid Round

Rectangular & Square Bar

Trapezoid / Dogbone Shapes


PULTRUDED FRP PROFILES Custom Profiles

Custom profiles can be an excellent solution to a wide range of problems in practically any application where structural profiles or other ďŹ berglass shapes do not meet the needs of the customer. Custom profiles should be considered when a unique shape is needed and/or when the properties of other materials are not suitable for the application. Custom Profiles are developed and produced in many shapes and materials according to the customers specific requirements to achieve optimal solutions..

Product Range

Benefits of Custom Profiles Designed speciďŹ cally for the application Provides better performance Provides increased reliability Results in lower life cycle costs Allows for parts consolidation Creates a competitive advantage


PULTRUDED FRP REBARS FRP Rebars Steel rebar has historically been used as an effective and costefficient concrete reinforcement. However, it is susceptible to oxidation (rust) when exposed to chlorides and certain other aggressive chemicals. Examples of such exposure include coastal areas, and sites where aggressive chemicals and ground conditions exist.

Steel rebar also conducts electricity and magnetic fields, attributes that are not desirable in many types of medical, nuclear, power generating, and electronic applications. FRP rebars have proven to be the solution and will give structures a longer service life.

Advantages       

Non-Corrosive - will not corrode exposed to a wide variety of corrosive elements including chloride ions. High Strength-to-Weight Ratio - provides good reinforcement in weight sensitive applications. Non-Conductive - provides excellent electrical and thermal insulation. Excellent Fatigue Resistance - performs very well in cyclic loading situations. Good Impact Resistance - resists sudden and severe point loading. Magnetic Transparency - not affected by electromagnetic fields; excellent for use in MRI and other types of electronic testing facilities. Light Weight - weigh approximately one-quarter the weight of an equivalent size steel bar - easy to be transported, no need of lifting equipment, saving high machine and manual cost.


FIBERGLASS STRUT SUPPORT SYSTEMS Strut Systems

Features & Benefits 

Corrosion Resistance

High Strength

Lightweight

Versatile

Fire Retardant

UV Resistant

Non-Conductive

Non-interfering / Non-magnetic

Cost Effective

Easy to Install and Access

Strut system is the most widely used because it is the most complete quality line of nonmetallic accessories, fasteners, hangers, pipe clamps and channels available. Strut system is a versatile, high-strength product that can use in nearly every application. Some of those applications include: wastewater treatment, refineries, chemical plants, marinas, pulp and paper, desalination facilities, theme parks, aquariums and underground vaults. Made from entirely nonmetallic, corrosion resistant resins, Fiberglass Strut can be used in demanding environments where steel strut systems have traditionally failed. Its lightweight components can be installed quickly and easily using standard metal working tools. All strut parts incorporate the highest quality materials to provide superior chemical resistance, strength, flame resistance and ultraviolet protection


FRP GRATINGS Surface SURFACE SLIP RESISTANT

CONCAVE

GRITTED / COARSE

GRITTED / FINE

Moulded Grating

MOULDED GRATING

Pultruded Grating

PULTRUDED GRATING

CORRUGATED


FRP GRATINGS Moulded Gratings

Features & Benefits           

Corrosion Resistant Impact Resistant Lightweight Bidirectional Load Bearing Easy to Fabricate and Install Low Maintenance Non – Conductive Fire Retardant Uniform in Appearance Slip Resistant Cost Effective

Moulded Gratings are produced by the hand lay-up process in which continuous fibreglass rovings are systematically laid in an open mould in the direction of vertical and horizontal, layer after layer manually, and thoroughly wetted out with liquid resin. When the weaving process is completed, the mould is heated to cure the grating panel. After curing, the grating panel is ejected from the mould. The standard panel would have concave non-slip walking surface. Other surface such as gritted surface, smooth surface are also produced on request. Gritted surface for applications where maximum wear resistance and slip resistance is required. Grit is embedded in the resin layer - not glued on - for greater durability. Moulded Grating is an excellent alternative to metal grating where there are safety concerns due to the presence of liquids and oils on the floor as well as corrosive environments where chemical resistance of the flooring material is important for long term durability. Moulded Gratings are lightweight and easy to fabricate. Savings on labor and equipment often make the total installed cost of them comparable to that of steel. Combining these installation savings with low maintenance, long life and worker safety, these products offer a life cycle cost that is significantly lower than that of metallic products.

Design Regularly Moulded Gratings are made from polyester resin matrix. Glass content is approximately 35%. They are also available with vinylester or phenolic resin. All kinds of resin are selfextinguishing and with UV-stabiliser. Standard colours are green, orange, yellow or grey, other colours are available on request. The high percentage of resin (65%) in moulded grating offers superior corrosion resistance and optimal impact resistance. Since Moulded Gratings are “cast” in onepiece, there is no mechanical joint between bearing bars, and along with the continuous fibreglass rovings in alternating layers, in the direction of vertical and horizontal, so the loads are distributed evenly in all directions. These features allow for use without continuous side support.


FRP GRATINGS Pultruded Gratings

Features & Benefits  Corrosion Resistant  Structurally Strong  High Impact and Fatigue Strength  Rigid  Lightweight  Easy to Fabricate and Install  Low Maintenance  Non – Conductive  Fire Retardant  Non-Sparking  Resistant to Chipping and Cracking  Aesthetically Pleasing Appearance  Slip Resistant

Pultruded Gratings are based upon high strength pultruded bars ( I-profiles or T-profiles) in load-bearing direction, which are connected by cross-rods with proper spacing through some assembly techniques.

Pultruded Gratings are lightweight, which saves on freight and makes installation easier. The unique cross-bar construction allows the grating panels to be easily cut and modified to fit almost any plant requirement.

Design Pultruded Gratings are made from isophthalic polyester resin. The reinforcement is achieved by a combination of fibreglass mats and rovings reaching a glass content of approximately 65%. They are also available with vinylester or phenolic resin. All kinds of resin are self-extinguishing and with UV-stabiliser. A wide variety of bearing bar shapes along with various bearing bar and cross-rod pacings are available depending on the design requirements. The traditional "I" bar shape provides maximum flexibility in design. It is available in 25mm, 30mm, and 38mm depths. The "T" bar shape provides a more solid walking surface and prevents catching high heels and other objects between the bars. It is available in 25mm, 38mm and 50mm depths. When using Pultruded Grating, make sure the bearing bars in the grating panel are oriented in the correct direction for the application. Bearing bars should traverse from support to support. Cross-rods are not intended to be applied in the span direction. Pultruded Grating has a primary advantage over moulded gratings: It has superior load-supporting ability over longer spans.


FRP GRATINGS FRP Gratings

Applications  Walkways  Catwalks  Platforms  Floors  Stairs  Ramps  Roof systems  Mezzanines  Trench & Pit Covers  Assembly lines  Guards for Electrical Equipments & Machinery


FRP GRATINGS Transparent Gratings Brighter Colours Transparent Gratings have become increasingly popular to provide brighter colours for Facades, Sun Screening, Equipment Screening and Cladding Panels. Transparent Gratings are manufactured using translucent resins, lightly tinted, in a range of colours, which allows maximum light transmission to produce the perfect decorative effect. When lit from behind light refracts through the translucent mesh construction to illuminate the front surface to create a "glow" effect. Transparent Gratings, although offering high light transmission characteristics, offer excellent sun shade protection, whilst still providing the advantage of 68% air flow ventilation. Due to the unique design, they will allow differing amounts of sunlight to pass through the mesh, depending on the sun's angle.


STAIR TREADS Stair Treads Stair Treads Stair Treads are produced in the same way as the FRP Pultruded Gratings and the FRP Moulded Gratings with additionally reinforced and highlighted edges. Support Angles

Moulded Stair Treads

Matching with the step treads, EMN produces support angles that can be mounted directly to the support bracket of the stairs. The hole pattern is flexible, so that the profile made of steel can be changed easily.

Covered Stair Treads

Stair Tread Covers

Pultruded Stair Treads Slip Resistant Corrosion Resistant Easily Fabricated Low Maintenance Low Installation Cost Long Service Life


SOLID FIBERGLASS PLATES Solid Fiberglass Plates Many applications require a solid flooring for a variety of reasons, such as odor control in a wastewater plant or in an offshore drilling mud room, or possibly for safety reasons to prevent any small objects from falling through the flooring to the level below. For these instances, we has two solutions: our solid fibreglass plate and our covered plate grating (panel profiles). Moulded Plates Moulded plate is manufactured by building up multiple layers of fiberglass reinforcement and specially-formulated resins. The result of this process is a solid composite panel offering both bidirectional strength and corrosion resistance.

Pultruded Plates Pultruded gritted plate is a solid anti-skid flooring, helps reduce worker slips and falls in both wet and dry applications. The grit surface can be fine, medium or coarse.

Features & Benefits • Corrosion resistant • Slip resistant • Superior ergonomics • Lightweight • Ability to support heavy loads • Easy to install • Minimum of material waste • Low maintenance • Easily cleaned by any cleaning solutions

Applications        

Fibreglass plate is available as solid plate or bonded to grating.

Walkways Splash Walls Overpasses Bridge Decks Pool Decks Insdustrial Floorings Trench Covers Odor Control Covers


SAFETY FLOORINGS Safety Floorings Safety Floorings are load-bearing gratings with closed laminated surfaces. The covering layer is reinforced by fibreglass mats and rovings to improve the load-bearing properties. Standard Safety Floorings have a polyester resin matrix with a glass content of approximately 35%. Safety Floorings can be offered with a special resin matrix of vinylester or phenolic resin. All resin types are self - extinguishing and UV -stabilised.

Standard colours are grey, yellow or green, other colours are available on request.

Pedestal


FRP PANEL PROFILES FRP Panel Profiles

FEATURES &

BENEFITS

The FRP Panel Profile is pultruded as a single profile in which the top surface and legs are integral to the part. The constant cross section panels offer a unique tongue and groove joint that allows the panels to mechanically lock eliminating vertical movement. The large spans can be covered economically with low weight.

• Unique tongue and groove interlock increases the speed of installation. • The standard width of the panels increase the speed of installation and reduces hardware cost.

Normally the FRP Panel Profiles have a polyester resin matrix with a fibreglass content reaching 65%. FRP Panel Profiles can be offered with a special resin matrix of vinylester resin. All resin types are self - extinguishing and UV -stabilised. Standard colour is grey. Other colours are available on request.

• The solid top panel eliminates the possibility of debris or tools falling through the flooring. • The solid surface panels can be used for odor control covers.

Safety Plankings

• The panel is available with a highly durable antiskid wearing surface for enhanced safety. • The lightweight panels are very strong and corrosion resistant.

Safety Deckings

Architectural Deckings


FRP PANEL PROFILES Safety Plankings This product is intended to replace wood, aluminum or steel planks in environments where corrosion or rotting creates costly maintenance problems or unsafe conditions. Used in a wide range of industrial and commercial applications, Safety Plankings provide a unique combination of easy installation, durability and low-maintenance. They also provide safe walkways in electrical applications because of its low conductivity and non-sparking features.

The safety plankings are available in 600 mm wide panels with or without perforations. Typical open areas are 12% open. DETAIL A

12% OPEN TOP OPTION


FRP PANEL PROFILES Safety Plankings

Applications          

Walkways Platforms Sidewalks Balcony Decking Marina Dock Bridge Decks Pool Decks Insdustrial Shower Floors Trench Covers Odor Control Covers

Safety Planking, when turned upside down, serves as an excellent concrete forming system in applications where corrosion and weight are construction concerns.


FRP PANEL PROFILES Safety Deckings Safety Decking is a specially designed system of 600 mm wide, slip resistant, fiberglass panels that overlap for a continuous solid surface. Safety Decking is intended to replace wood, aluminum or steel decking in environments where corrosion or rotting creates costly maintenance problems or unsafe conditions. Low in conductivity and nonsparking, it provides safe walkways in applications near electrical lines.

Deteriorated Plywood Fan Deck


FRP PANEL PROFILES Architectural Deckings

Features & Benefits of Architectural Decking System

General

 Strong

Architectural panels are designed to connect to form a continuous solid surface utilizing an innovative interlocking design.

 Rot, Rust & Mildew Resistant

Architectural decking system offers an alternative to traditional decking materials. The panels will not rot, rust, chip or mildew, which make them ideal for high-moisture environments, including saltwater. Architectural decking system commonly replaces wood or plastic lumber in applications requiring stronger decking materials.

The deck sections are easily installed with screw-like fasteners that are not visible, creating a smooth, attractive surface.

 Lightweight  Non-Conductivity

Materials of Construction

 Easy to Install  Cost Effective  Slip Resistant  Hidden Fastening System

Architectural decking system is a high strength, planking panel system. Manufactured of pultruded fiberglass reinforced polymer (FRP). Architectural panels have intermediate ribs on each panel that help provide extra stiffness and strength, allowing the deck to perform ideally in areas with pedestrian traffic. An optional grit surface can be added to provide a non-skid surface. Standard colors are light gray and beige.

Hidden Fastening System


FRP PANEL PROFILES Architectural Deckings

The decking is lowmaintenance and can withstand the corrosive salt-water environment with ease

Applications Architectural decking system is designed to be used for flooring. Typical applications include:  Hotel Recreational Areas  Homes and Condominiums  Buildings in Coastal Areas  Marinas and Docks


FRP PANEL PROFILES Building Panel Systems

Design and Components

Applications  Buildings

 Easy To Maintain

Building panel system is suitable for major load bearing structural applications. The modular construction system consists of six interlocking components. They are produced by the pultrusion process. The main component is a 80 mm thick x 600 mm wide openribbed building panel and features a cellular construction. Building panels can be connected using the 3-way connectors, 45° connectors, toggles and/or hangers. 3-way and 45° connectors allow the system components to turn corners and facilitate the joining of walls or sides. Toggles lock panels and connectors together securely. For added flexibility, the system also includes a hanger and an end cap. For permanent structures, joints between panels and connectors are bonded during assembly. This uniquely designed system of interlocking components makes it possible to design fiberglass structures at significantly lower costs for a broad range of construction applications with an almost unlimited number of configurations.

 Cost Effective

Materials of Construction

 Secondary Containment Systems

Features & Benefits of Buiding Panel System  Strong  Corrosion Resistant  Lightweight  Non Conductivity

 Easy To Install  Interlocking Joints

Buiding Panel System is available in standard polyester (green), polyester fire retardant (gray) or vinyl ester fire retardant (beige) resin systems. The resin mixture contains a UV inhibitor and the composite includes a surface veil on all exposed surfaces for enhanced corrosion and UV protection. Other resins and colors are available upon request.

Hollow Core Building Panels

Building Panel System

 Bridge Enclosure Systems  Cooling Towers  Bridge Decks  Tank Covers  Platforms  Walkways  Cellular Enclosures

 Restaurants


FRP PANEL PROFILES Building Panel Systems


FRP PANEL PROFILES Bridge Deck Systems Bridge Deck Bridge Deck consists of two layers of pultruded FRP I-bar grating separated by FRP connectors with nylon bolts. The components are: • I-bars (38 mm) running continuously in the direction perpendicular to traffic; • Three-part cross rods running through pre-drilled holes spaced at 100 mm on-center in the I-bars web in the direction parallel to traffic; and • Two-part vertical connectors that space the grating layers 100 mm apart. A 3.2 mm pultruded FRP plate is bonded to the bottom grating layer to create a stay-in-place concrete form.

Bridge Deck Systems


FRP PANEL PROFILES Double Web Beam Bridge Panels


FRP PANEL PROFILES Fiberglass Baffle Panels Lightweight, high strength fiberglass baffle panels are ideal for underwater flow control applications. Fiberglass baffle panels are cost effective because they have a much longer life cycle than wood, concrete, steel and other traditional materials that are subject to rot and corrosion. The lightweight panels are easy to install and can be easily removed for cleaning and access. Baffle panels are available in 300 mm and 600 mm widths for easy fabrication and installation of new systems or the rehabilitation of existing systems. Baffles can be mounted to existing columns, attached to H-beams or attached to concrete walls with clip angles.

Standard baffle panels are manufactured using a polyester resin. Optional resin systems offered include a fire retardant polyester resin system or a vinyl ester resin system for enhanced corrosion resistance. Panels include a UV inhibitor and a surfacing veil for additional corrosion resistance and UV protection.

Applications  Municipal & Industrial Water and Wastewater Systems  Aeration Chambers  Contact Chambers  Retention Basins

Features & Benefits of Fiberglass Baffle Panel 

Corrosion Resistant

High Strength

Lightweight

Low in Maintenance

UV Resistant

Low Conductivity

Dimensionally Stable


FRP PANEL PROFILES Noise Reduction Plankings Sound Barrier Walls Noise reduction planking is used to provide the needed sound reduction for congested traffic or retail areas. In addition, the FRP material is lightweight allowing for fast modular installation and the ability to use even in challenging terrain. Noise reduction planking requires no heavy equipment for installation or repairs which will minimize disruption to traffic and damage to surrounding vegetation. The FRP material will not corrode, rust or rot; so once it is installed, the noise reduction planking maintains its aesthetic beauty for a long time of service life.

         

Applications Highways Railroads Schools Restaurants Shopping Centers Commercial Sites Recreational Facilities Commercial Sites Industrial Sites Residential Developments

Noise Reduction Planking Noise reduction planking is a fiberglass reinforced plastic barrier manufactured through a high-quality pultrusion process. To form a pultruded element, continuous fiber rovings and mat are mechanically drawn through a resin bath and shaped through a series of forming guides, then pulled through a heated die.


FRP PANEL PROFILES Fiberglass Sheet Pile Systems

FRP Sheet Pile System is manufactured by the pultrusion process, and is designed and manufactured to provide a solution for deteriorated waterfront structures subjected to the harsh marine operating environment. Especially they can be used to protect the shore, to avoid erosion. The high corrosion resistance is best for use in seawater, the advantage over steel sheet piles is dramatic. FRP Sheet Pile System will not leach harmful chemicals used in wood treatments, making them environmentally safe. Composite materials offer cost effective long-term and low-maintenance solutions. The use of composite materials in various marine environments has shown to be more economical than traditional materials when lifecycle costs are considered. FRP Sheet Pile System is an alternative construction material without many of the performance disadvantages of conventional materials such as aluminium, concrete and wood.

Heavy rust in the use of sheet piles made from metal. FRP sheet pile system

Corner Connectors

Top Caps

Walings

The sheet pile system consists of the following components: 

Interlocking Sheet Piling Panels

Interlocking Corner Connectors

Top Caps

Walings & Tieback Rods

Fasterners

Sheet Piling Panels


FRP PANEL PROFILES Fiberglass Sheet Pile Systems FRP Sheet Pile System will not corrode, decay or spall thereby reducing maintenance costs and future replacements. FRP Sheet Pile System resists impact, creep, UV light and weathering effects better than PVC materials and are easier to install in harder soil conditions. Due to their low weight FRP-sheet piles can be used on difficult accessable areas and can be carried with hands to site. Each panel is lightweight with an interlocking design, so installation equipment and labor is minimized during construction. Pultruded connectors are used to permit easy corner installation and the flexibility.


CABLE MANAGEMENT Fiberglass Cable Trays and Cable Ladders Benefits

General Fiberglass Cable Trays and Cable Ladders are used in highly corrosive environments. Applications in high electromagnetic fields are possible. They are the ultimate alternative to steel and stainless steel solutions. They are economically priced and distinguish themselves from other conventional materials due to outstanding properties.

Corrosion Resistant Lightweight and Durable Easy to transport and install High Strength to Weight Ratio Low Thermal Conductivity Non Conductive Fire Retardant Cost Effective

Cable Management Systems: Cable Trays & Cable Ladders Cable Ladders

Strut Support Systems

Cable Trays

Cable Tray Covers


STAIR SYSTEMS Fiberglass Stair Systems

General Stairs are designed for use in corrosive environments. Existing installations can be replaced quickly and easily.

Benefits Slip Resistant Corrosion Resistant Easily Fabricated Low Maintenance Low Installation Cost Long Service Life


HANDRAIL SYSTEMS Architectural Fiberglass Handrail Systems

General Handrail systems are a strong, attractive and safe solution to your structural needs. The railing systems are particularly well-suited to corrosive environments like those found in commercial structures with urban and salt air corrosion. Square Systems with square pickets

Square Systems with round pickets

Benefits          

Corrosion resistance High strength Light weight Impact resistance Low conductivity Easy installation and field fabrication Economical installation of long straight runs Fewer components, reducing freight cost Low maintenance Safety

Rounded Systems with square pickets Handrail systems mount quickly and easily to posts and walls

Custom half round top rail


HANDRAIL SYSTEMS Industrial Fiberglass Handrail Systems General Industrial fiberglass handrails are commercial railing systems for stair rails, platform / walkway handrails and guardrails. Parts are made to fit with each other and are easy to use. The railing systems are particularly well-suited to corrosive environments like those found in industrial, chemical and wastewater treatment plants as well as commercial structures with urban and salt air corrosion.

Square Post / Rail

Round Post / Rail

Round Handrail Components


FENCE SYSTEMS Fiberglass Fence Systems FRP fence system offers a complete solution for individual requirements. Fences are used in high corrosive environments. As FRP is radar transparent these fences are often used at airport areas. They are invisible to the ground radar. Parts are made to fit with each other and are easy to use.


FENCE SYSTEMS Fiberglass Fence Systems

Airport Fence

Decorative Fence


LADDERS AND CAGES Fiberglass Ladders and Ladder Cages General FRP Ladders and Ladder Cages are the perfect solution for any installations that have contact with different types of aggressive environments. They have got more advantages compared to conventional ladders. They are resistant to corrosion and they are easy to handle due to their thermal insulation. Even in complete immersion applications, they have outlasted aluminum and steel and required little or no maintenance. Furthermore they guarantee secure work due to electric insulation and non-slip elastomer feet as well as easy installation.

Ladder with a Platform made of FRP Profiles


TOOL HANDLES Fiberglass Tool Handles Features & Benefits 

Far stronger and long lasting than wooden handles

High impact resistance

Non-conductive

Corrosion resistant

Will not peel, crack or splinter

Will maintain its original color for many years

Aesthetic appearance

Tool Handles

Color Options

Live Line Hot Sticks

Pigmenting the resin in the pultrusion process produces the bright, attractive colors of the tool handles. With the color through out the part, no painting is needed, so chipping or peeling is eliminated. A spectrum of color options are available

Availability Many standard sizes and colors are available. Custom shapes, woodgrain appearance and more colors are available to meet customer specifications.


MARKETS & APPLICATIONS Markets

Applications

Electrical Industry

Electrical Industry

Insulators Posts and Crossbars Transformers & Motors Switchgears Crossarms and Braces Poles Cable Managements Stairways & Handrails Walkways Coverings Screenings

Alternative Energies Solar panel supports Wind turbine blade structures and components

Alternative Energies

Building / Construction

Building / Construction

Transportation

Anticorrosion reinforcement bars (rebars) Beams & Crossbars Billboard sign frames and elevated walkways Building Panels Caged Ladders Catwalks Coverings Handrails & Stair Treads Platforms Purifiers Roof Panels Screenings Scaffolding Walkways

Transportation Pedestrian Bridges Vehicular Bridges Advertising panels Traffic signs Lighting fixtures Truck Trailer Flooring Shim Plates Median barriers Railway panels Track walkways Access ways Docks Trenches Walking surfaces


MARKETS & APPLICATIONS Applications

Architecture Railings Systems Fencing Systems Decking & Walkways Docks & Piers Rooftop Structures Trellis Residential Home Columns Waterpark Structures Gates Bridges Screenings

Markets

Nautical FRP Canoe & Yacht Buoys Beacons Stays and Shrouds Sail Yard Architecture

Nautical

Marinas & Docks Handrails Platforms Walkways Catwalks Floating Docks & Piers Support Frame & Structure

Waterparks & Pools Handrails Stairs Platforms Walkways Fencing Bulkheads Covers

Marinas & Dock

Waterparks & Pool


MARKETS & APPLICATIONS Markets

Applications

Sports & Recreation

Sports & Recreation

Surfing Skiing Hockey Fishing Billiar Cues Signaling Flags Poles & Bars Exercise Equipment

Hotel & Restaurant Handrails Stairs Decking Fencing Gates Ladders & Cages Cladding & Screening

Hotel & Motel & Restaurant

Aeronautics Fencing Deflector Supports

Aeronautics RADAR TRANSPARENT

Tool Handles

Tool Handles Tool Handles Live Line Hot Sticks Operating Rods


MARKETS & APPLICATIONS Applications

Agriculture Greenhouse structures Plant Trainers Fencing Seperation Walls Stakes - Staking System Pens & Enclosures

Markets

Telecommunications Coaxial Cable Cell Tower & Poles Attachment Hardware Equipment Housing (Concealment) Support Frame & Structure Telecommunications

Agriculture

Water & Wastewater Baffle Panels Odor Control Covers Fabricated Structures

Offshore Oil & Gas Flooring Handrails & Stairs Platforms

Water & Wastewater

Offshore Oil & Gas


SOUTHERN ELECTRICAL EQUIPMENT COMPANY 40 - Street 11 - TruongTho Ward - ThuDuc District - HoChiMinh City – Vietnam (84.8) 3897 8933 emnco@hcm.vnn.vn www.emn.com.vn www.emncomposite.com.vn

ISO 9001:2008


emnbrochure5